summaryrefslogtreecommitdiff
path: root/drivers/media/pci/ttpci/budget-av.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/pci/ttpci/budget-av.c')
-rw-r--r--drivers/media/pci/ttpci/budget-av.c1640
1 files changed, 1640 insertions, 0 deletions
diff --git a/drivers/media/pci/ttpci/budget-av.c b/drivers/media/pci/ttpci/budget-av.c
new file mode 100644
index 00000000000..12ddb53c58d
--- /dev/null
+++ b/drivers/media/pci/ttpci/budget-av.c
@@ -0,0 +1,1640 @@
+/*
+ * budget-av.c: driver for the SAA7146 based Budget DVB cards
+ * with analog video in
+ *
+ * Compiled from various sources by Michael Hunold <michael@mihu.de>
+ *
+ * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
+ * Andrew de Quincey <adq_dvb@lidskialf.net>
+ *
+ * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
+ *
+ * Copyright (C) 1999-2002 Ralph Metzler
+ * & Marcus Metzler for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org/
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "budget.h"
+#include "stv0299.h"
+#include "stb0899_drv.h"
+#include "stb0899_reg.h"
+#include "stb0899_cfg.h"
+#include "tda8261.h"
+#include "tda8261_cfg.h"
+#include "tda1002x.h"
+#include "tda1004x.h"
+#include "tua6100.h"
+#include "dvb-pll.h"
+#include <media/saa7146_vv.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/spinlock.h>
+
+#include "dvb_ca_en50221.h"
+
+#define DEBICICAM 0x02420000
+
+#define SLOTSTATUS_NONE 1
+#define SLOTSTATUS_PRESENT 2
+#define SLOTSTATUS_RESET 4
+#define SLOTSTATUS_READY 8
+#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct budget_av {
+ struct budget budget;
+ struct video_device *vd;
+ int cur_input;
+ int has_saa7113;
+ struct tasklet_struct ciintf_irq_tasklet;
+ int slot_status;
+ struct dvb_ca_en50221 ca;
+ u8 reinitialise_demod:1;
+};
+
+static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot);
+
+
+/* GPIO Connections:
+ * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*!
+ * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory
+ * 2 - CI Card Enable (Active Low)
+ * 3 - CI Card Detect
+ */
+
+/****************************************************************************
+ * INITIALIZATION
+ ****************************************************************************/
+
+static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg)
+{
+ u8 mm1[] = { 0x00 };
+ u8 mm2[] = { 0x00 };
+ struct i2c_msg msgs[2];
+
+ msgs[0].flags = 0;
+ msgs[1].flags = I2C_M_RD;
+ msgs[0].addr = msgs[1].addr = id / 2;
+ mm1[0] = reg;
+ msgs[0].len = 1;
+ msgs[1].len = 1;
+ msgs[0].buf = mm1;
+ msgs[1].buf = mm2;
+
+ i2c_transfer(i2c, msgs, 2);
+
+ return mm2[0];
+}
+
+static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len)
+{
+ u8 mm1[] = { reg };
+ struct i2c_msg msgs[2] = {
+ {.addr = id / 2,.flags = 0,.buf = mm1,.len = 1},
+ {.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len}
+ };
+
+ if (i2c_transfer(i2c, msgs, 2) != 2)
+ return -EIO;
+
+ return 0;
+}
+
+static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val)
+{
+ u8 msg[2] = { reg, val };
+ struct i2c_msg msgs;
+
+ msgs.flags = 0;
+ msgs.addr = id / 2;
+ msgs.len = 2;
+ msgs.buf = msg;
+ return i2c_transfer(i2c, &msgs, 1);
+}
+
+static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ int result;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
+ udelay(1);
+
+ result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1);
+ if (result == -ETIMEDOUT) {
+ ciintf_slot_shutdown(ca, slot);
+ pr_info("cam ejected 1\n");
+ }
+ return result;
+}
+
+static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ int result;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
+ udelay(1);
+
+ result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1);
+ if (result == -ETIMEDOUT) {
+ ciintf_slot_shutdown(ca, slot);
+ pr_info("cam ejected 2\n");
+ }
+ return result;
+}
+
+static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ int result;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+ udelay(1);
+
+ result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
+ if (result == -ETIMEDOUT) {
+ ciintf_slot_shutdown(ca, slot);
+ pr_info("cam ejected 3\n");
+ return -ETIMEDOUT;
+ }
+ return result;
+}
+
+static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ int result;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+ udelay(1);
+
+ result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
+ if (result == -ETIMEDOUT) {
+ ciintf_slot_shutdown(ca, slot);
+ pr_info("cam ejected 5\n");
+ }
+ return result;
+}
+
+static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ struct saa7146_dev *saa = budget_av->budget.dev;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ dprintk(1, "ciintf_slot_reset\n");
+ budget_av->slot_status = SLOTSTATUS_RESET;
+
+ saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
+
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
+ msleep(2);
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */
+ msleep(20); /* 20 ms Vcc settling time */
+
+ saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
+ ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+ msleep(20);
+
+ /* reinitialise the frontend if necessary */
+ if (budget_av->reinitialise_demod)
+ dvb_frontend_reinitialise(budget_av->budget.dvb_frontend);
+
+ return 0;
+}
+
+static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ struct saa7146_dev *saa = budget_av->budget.dev;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ dprintk(1, "ciintf_slot_shutdown\n");
+
+ ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+ budget_av->slot_status = SLOTSTATUS_NONE;
+
+ return 0;
+}
+
+static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ struct saa7146_dev *saa = budget_av->budget.dev;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
+
+ ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
+
+ return 0;
+}
+
+static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ struct saa7146_dev *saa = budget_av->budget.dev;
+ int result;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ /* test the card detect line - needs to be done carefully
+ * since it never goes high for some CAMs on this interface (e.g. topuptv) */
+ if (budget_av->slot_status == SLOTSTATUS_NONE) {
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
+ udelay(1);
+ if (saa7146_read(saa, PSR) & MASK_06) {
+ if (budget_av->slot_status == SLOTSTATUS_NONE) {
+ budget_av->slot_status = SLOTSTATUS_PRESENT;
+ pr_info("cam inserted A\n");
+ }
+ }
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
+ }
+
+ /* We also try and read from IO memory to work round the above detection bug. If
+ * there is no CAM, we will get a timeout. Only done if there is no cam
+ * present, since this test actually breaks some cams :(
+ *
+ * if the CI interface is not open, we also do the above test since we
+ * don't care if the cam has problems - we'll be resetting it on open() anyway */
+ if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) {
+ saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+ result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1);
+ if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) {
+ budget_av->slot_status = SLOTSTATUS_PRESENT;
+ pr_info("cam inserted B\n");
+ } else if (result < 0) {
+ if (budget_av->slot_status != SLOTSTATUS_NONE) {
+ ciintf_slot_shutdown(ca, slot);
+ pr_info("cam ejected 5\n");
+ return 0;
+ }
+ }
+ }
+
+ /* read from attribute memory in reset/ready state to know when the CAM is ready */
+ if (budget_av->slot_status == SLOTSTATUS_RESET) {
+ result = ciintf_read_attribute_mem(ca, slot, 0);
+ if (result == 0x1d) {
+ budget_av->slot_status = SLOTSTATUS_READY;
+ }
+ }
+
+ /* work out correct return code */
+ if (budget_av->slot_status != SLOTSTATUS_NONE) {
+ if (budget_av->slot_status & SLOTSTATUS_READY) {
+ return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+ }
+ return DVB_CA_EN50221_POLL_CAM_PRESENT;
+ }
+ return 0;
+}
+
+static int ciintf_init(struct budget_av *budget_av)
+{
+ struct saa7146_dev *saa = budget_av->budget.dev;
+ int result;
+
+ memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
+
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+ saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
+ saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
+
+ /* Enable DEBI pins */
+ saa7146_write(saa, MC1, MASK_27 | MASK_11);
+
+ /* register CI interface */
+ budget_av->ca.owner = THIS_MODULE;
+ budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem;
+ budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem;
+ budget_av->ca.read_cam_control = ciintf_read_cam_control;
+ budget_av->ca.write_cam_control = ciintf_write_cam_control;
+ budget_av->ca.slot_reset = ciintf_slot_reset;
+ budget_av->ca.slot_shutdown = ciintf_slot_shutdown;
+ budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
+ budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
+ budget_av->ca.data = budget_av;
+ budget_av->budget.ci_present = 1;
+ budget_av->slot_status = SLOTSTATUS_NONE;
+
+ if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
+ &budget_av->ca, 0, 1)) != 0) {
+ pr_err("ci initialisation failed\n");
+ goto error;
+ }
+
+ pr_info("ci interface initialised\n");
+ return 0;
+
+error:
+ saa7146_write(saa, MC1, MASK_27);
+ return result;
+}
+
+static void ciintf_deinit(struct budget_av *budget_av)
+{
+ struct saa7146_dev *saa = budget_av->budget.dev;
+
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
+ saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
+ saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
+
+ /* release the CA device */
+ dvb_ca_en50221_release(&budget_av->ca);
+
+ /* disable DEBI pins */
+ saa7146_write(saa, MC1, MASK_27);
+}
+
+
+static const u8 saa7113_tab[] = {
+ 0x01, 0x08,
+ 0x02, 0xc0,
+ 0x03, 0x33,
+ 0x04, 0x00,
+ 0x05, 0x00,
+ 0x06, 0xeb,
+ 0x07, 0xe0,
+ 0x08, 0x28,
+ 0x09, 0x00,
+ 0x0a, 0x80,
+ 0x0b, 0x47,
+ 0x0c, 0x40,
+ 0x0d, 0x00,
+ 0x0e, 0x01,
+ 0x0f, 0x44,
+
+ 0x10, 0x08,
+ 0x11, 0x0c,
+ 0x12, 0x7b,
+ 0x13, 0x00,
+ 0x15, 0x00, 0x16, 0x00, 0x17, 0x00,
+
+ 0x57, 0xff,
+ 0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07,
+ 0x5b, 0x83, 0x5e, 0x00,
+ 0xff
+};
+
+static int saa7113_init(struct budget_av *budget_av)
+{
+ struct budget *budget = &budget_av->budget;
+ struct saa7146_dev *saa = budget->dev;
+ const u8 *data = saa7113_tab;
+
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
+ msleep(200);
+
+ if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
+ dprintk(1, "saa7113 not found on KNC card\n");
+ return -ENODEV;
+ }
+
+ dprintk(1, "saa7113 detected and initializing\n");
+
+ while (*data != 0xff) {
+ i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1));
+ data += 2;
+ }
+
+ dprintk(1, "saa7113 status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f));
+
+ return 0;
+}
+
+static int saa7113_setinput(struct budget_av *budget_av, int input)
+{
+ struct budget *budget = &budget_av->budget;
+
+ if (1 != budget_av->has_saa7113)
+ return -ENODEV;
+
+ if (input == 1) {
+ i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7);
+ i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80);
+ } else if (input == 0) {
+ i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0);
+ i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00);
+ } else
+ return -EINVAL;
+
+ budget_av->cur_input = input;
+ return 0;
+}
+
+
+static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+ u8 m1;
+
+ aclk = 0xb5;
+ if (srate < 2000000)
+ bclk = 0x86;
+ else if (srate < 5000000)
+ bclk = 0x89;
+ else if (srate < 15000000)
+ bclk = 0x8f;
+ else if (srate < 45000000)
+ bclk = 0x95;
+
+ m1 = 0x14;
+ if (srate < 4000000)
+ m1 = 0x10;
+
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+ stv0299_writereg(fe, 0x0f, 0x80 | m1);
+
+ return 0;
+}
+
+static int philips_su1278_ty_ci_tuner_set_params(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ u32 div;
+ u8 buf[4];
+ struct budget *budget = (struct budget *) fe->dvb->priv;
+ struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
+
+ if ((c->frequency < 950000) || (c->frequency > 2150000))
+ return -EINVAL;
+
+ div = (c->frequency + (125 - 1)) / 125; /* round correctly */
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+ buf[3] = 0x20;
+
+ if (c->symbol_rate < 4000000)
+ buf[3] |= 1;
+
+ if (c->frequency < 1250000)
+ buf[3] |= 0;
+ else if (c->frequency < 1550000)
+ buf[3] |= 0x40;
+ else if (c->frequency < 2050000)
+ buf[3] |= 0x80;
+ else if (c->frequency < 2150000)
+ buf[3] |= 0xC0;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+ return 0;
+}
+
+static u8 typhoon_cinergy1200s_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
+ 0x06, 0x40, /* DAC not used, set to high impendance mode */
+ 0x07, 0x00, /* DAC LSB */
+ 0x08, 0x40, /* DiSEqC off */
+ 0x09, 0x00, /* FIFO */
+ 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+ 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
+ 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
+ 0x10, 0x3f, // AGC2 0x3d
+ 0x11, 0x84,
+ 0x12, 0xb9,
+ 0x15, 0xc9, // lock detector threshold
+ 0x16, 0x00,
+ 0x17, 0x00,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1a, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
+ 0x29, 0x1e, // 1/2 threshold
+ 0x2a, 0x14, // 2/3 threshold
+ 0x2b, 0x0f, // 3/4 threshold
+ 0x2c, 0x09, // 5/6 threshold
+ 0x2d, 0x05, // 7/8 threshold
+ 0x2e, 0x01,
+ 0x31, 0x1f, // test all FECs
+ 0x32, 0x19, // viterbi and synchro search
+ 0x33, 0xfc, // rs control
+ 0x34, 0x93, // error control
+ 0x0f, 0x92,
+ 0xff, 0xff
+};
+
+static struct stv0299_config typhoon_config = {
+ .demod_address = 0x68,
+ .inittab = typhoon_cinergy1200s_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0299_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+};
+
+
+static struct stv0299_config cinergy_1200s_config = {
+ .demod_address = 0x68,
+ .inittab = typhoon_cinergy1200s_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0299_LOCKOUTPUT_0,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+};
+
+static struct stv0299_config cinergy_1200s_1894_0010_config = {
+ .demod_address = 0x68,
+ .inittab = typhoon_cinergy1200s_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .skip_reinit = 0,
+ .lock_output = STV0299_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+};
+
+static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct budget *budget = (struct budget *) fe->dvb->priv;
+ u8 buf[6];
+ struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
+ int i;
+
+#define CU1216_IF 36125000
+#define TUNER_MUL 62500
+
+ u32 div = (c->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0xce;
+ buf[3] = (c->frequency < 150000000 ? 0x01 :
+ c->frequency < 445000000 ? 0x02 : 0x04);
+ buf[4] = 0xde;
+ buf[5] = 0x20;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+
+ /* wait for the pll lock */
+ msg.flags = I2C_M_RD;
+ msg.len = 1;
+ for (i = 0; i < 20; i++) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget->i2c_adap, &msg, 1) == 1 && (buf[0] & 0x40))
+ break;
+ msleep(10);
+ }
+
+ /* switch the charge pump to the lower current */
+ msg.flags = 0;
+ msg.len = 2;
+ msg.buf = &buf[2];
+ buf[2] &= ~0x40;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static struct tda1002x_config philips_cu1216_config = {
+ .demod_address = 0x0c,
+ .invert = 1,
+};
+
+static struct tda1002x_config philips_cu1216_config_altaddress = {
+ .demod_address = 0x0d,
+ .invert = 0,
+};
+
+static struct tda10023_config philips_cu1216_tda10023_config = {
+ .demod_address = 0x0c,
+ .invert = 1,
+};
+
+static int philips_tu1216_tuner_init(struct dvb_frontend *fe)
+{
+ struct budget *budget = (struct budget *) fe->dvb->priv;
+ static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
+ struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
+
+ // setup PLL configuration
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
+ return -EIO;
+ msleep(1);
+
+ return 0;
+}
+
+static int philips_tu1216_tuner_set_params(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct budget *budget = (struct budget *) fe->dvb->priv;
+ u8 tuner_buf[4];
+ struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len =
+ sizeof(tuner_buf) };
+ int tuner_frequency = 0;
+ u8 band, cp, filter;
+
+ // determine charge pump
+ tuner_frequency = c->frequency + 36166000;
+ if (tuner_frequency < 87000000)
+ return -EINVAL;
+ else if (tuner_frequency < 130000000)
+ cp = 3;
+ else if (tuner_frequency < 160000000)
+ cp = 5;
+ else if (tuner_frequency < 200000000)
+ cp = 6;
+ else if (tuner_frequency < 290000000)
+ cp = 3;
+ else if (tuner_frequency < 420000000)
+ cp = 5;
+ else if (tuner_frequency < 480000000)
+ cp = 6;
+ else if (tuner_frequency < 620000000)
+ cp = 3;
+ else if (tuner_frequency < 830000000)
+ cp = 5;
+ else if (tuner_frequency < 895000000)
+ cp = 7;
+ else
+ return -EINVAL;
+
+ // determine band
+ if (c->frequency < 49000000)
+ return -EINVAL;
+ else if (c->frequency < 161000000)
+ band = 1;
+ else if (c->frequency < 444000000)
+ band = 2;
+ else if (c->frequency < 861000000)
+ band = 4;
+ else
+ return -EINVAL;
+
+ // setup PLL filter
+ switch (c->bandwidth_hz) {
+ case 6000000:
+ filter = 0;
+ break;
+
+ case 7000000:
+ filter = 0;
+ break;
+
+ case 8000000:
+ filter = 1;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ // calculate divisor
+ // ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
+ tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000;
+
+ // setup tuner buffer
+ tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
+ tuner_buf[1] = tuner_frequency & 0xff;
+ tuner_buf[2] = 0xca;
+ tuner_buf[3] = (cp << 5) | (filter << 3) | band;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
+ return -EIO;
+
+ msleep(1);
+ return 0;
+}
+
+static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
+ const struct firmware **fw, char *name)
+{
+ struct budget *budget = (struct budget *) fe->dvb->priv;
+
+ return request_firmware(fw, name, &budget->dev->pci->dev);
+}
+
+static struct tda1004x_config philips_tu1216_config = {
+
+ .demod_address = 0x8,
+ .invert = 1,
+ .invert_oclk = 1,
+ .xtal_freq = TDA10046_XTAL_4M,
+ .agc_config = TDA10046_AGC_DEFAULT,
+ .if_freq = TDA10046_FREQ_3617,
+ .request_firmware = philips_tu1216_request_firmware,
+};
+
+static u8 philips_sd1878_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7d,
+ 0x05, 0x35,
+ 0x06, 0x40,
+ 0x07, 0x00,
+ 0x08, 0x43,
+ 0x09, 0x02,
+ 0x0C, 0x51,
+ 0x0D, 0x82,
+ 0x0E, 0x23,
+ 0x10, 0x3f,
+ 0x11, 0x84,
+ 0x12, 0xb9,
+ 0x15, 0xc9,
+ 0x16, 0x19,
+ 0x17, 0x8c,
+ 0x18, 0x59,
+ 0x19, 0xf8,
+ 0x1a, 0xfe,
+ 0x1c, 0x7f,
+ 0x1d, 0x00,
+ 0x1e, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00,
+ 0x29, 0x28,
+ 0x2a, 0x14,
+ 0x2b, 0x0f,
+ 0x2c, 0x09,
+ 0x2d, 0x09,
+ 0x31, 0x1f,
+ 0x32, 0x19,
+ 0x33, 0xfc,
+ 0x34, 0x93,
+ 0xff, 0xff
+};
+
+static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe,
+ u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+ u8 m1;
+
+ aclk = 0xb5;
+ if (srate < 2000000)
+ bclk = 0x86;
+ else if (srate < 5000000)
+ bclk = 0x89;
+ else if (srate < 15000000)
+ bclk = 0x8f;
+ else if (srate < 45000000)
+ bclk = 0x95;
+
+ m1 = 0x14;
+ if (srate < 4000000)
+ m1 = 0x10;
+
+ stv0299_writereg(fe, 0x0e, 0x23);
+ stv0299_writereg(fe, 0x0f, 0x94);
+ stv0299_writereg(fe, 0x10, 0x39);
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+ stv0299_writereg(fe, 0x15, 0xc9);
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+ stv0299_writereg(fe, 0x0f, 0x80 | m1);
+
+ return 0;
+}
+
+static struct stv0299_config philips_sd1878_config = {
+ .demod_address = 0x68,
+ .inittab = philips_sd1878_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0299_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = philips_sd1878_ci_set_symbol_rate,
+};
+
+/* KNC1 DVB-S (STB0899) Inittab */
+static const struct stb0899_s1_reg knc1_stb0899_s1_init_1[] = {
+
+ { STB0899_DEV_ID , 0x81 },
+ { STB0899_DISCNTRL1 , 0x32 },
+ { STB0899_DISCNTRL2 , 0x80 },
+ { STB0899_DISRX_ST0 , 0x04 },
+ { STB0899_DISRX_ST1 , 0x00 },
+ { STB0899_DISPARITY , 0x00 },
+ { STB0899_DISSTATUS , 0x20 },
+ { STB0899_DISF22 , 0x8c },
+ { STB0899_DISF22RX , 0x9a },
+ { STB0899_SYSREG , 0x0b },
+ { STB0899_ACRPRESC , 0x11 },
+ { STB0899_ACRDIV1 , 0x0a },
+ { STB0899_ACRDIV2 , 0x05 },
+ { STB0899_DACR1 , 0x00 },
+ { STB0899_DACR2 , 0x00 },
+ { STB0899_OUTCFG , 0x00 },
+ { STB0899_MODECFG , 0x00 },
+ { STB0899_IRQSTATUS_3 , 0x30 },
+ { STB0899_IRQSTATUS_2 , 0x00 },
+ { STB0899_IRQSTATUS_1 , 0x00 },
+ { STB0899_IRQSTATUS_0 , 0x00 },
+ { STB0899_IRQMSK_3 , 0xf3 },
+ { STB0899_IRQMSK_2 , 0xfc },
+ { STB0899_IRQMSK_1 , 0xff },
+ { STB0899_IRQMSK_0 , 0xff },
+ { STB0899_IRQCFG , 0x00 },
+ { STB0899_I2CCFG , 0x88 },
+ { STB0899_I2CRPT , 0x58 }, /* Repeater=8, Stop=disabled */
+ { STB0899_IOPVALUE5 , 0x00 },
+ { STB0899_IOPVALUE4 , 0x20 },
+ { STB0899_IOPVALUE3 , 0xc9 },
+ { STB0899_IOPVALUE2 , 0x90 },
+ { STB0899_IOPVALUE1 , 0x40 },
+ { STB0899_IOPVALUE0 , 0x00 },
+ { STB0899_GPIO00CFG , 0x82 },
+ { STB0899_GPIO01CFG , 0x82 },
+ { STB0899_GPIO02CFG , 0x82 },
+ { STB0899_GPIO03CFG , 0x82 },
+ { STB0899_GPIO04CFG , 0x82 },
+ { STB0899_GPIO05CFG , 0x82 },
+ { STB0899_GPIO06CFG , 0x82 },
+ { STB0899_GPIO07CFG , 0x82 },
+ { STB0899_GPIO08CFG , 0x82 },
+ { STB0899_GPIO09CFG , 0x82 },
+ { STB0899_GPIO10CFG , 0x82 },
+ { STB0899_GPIO11CFG , 0x82 },
+ { STB0899_GPIO12CFG , 0x82 },
+ { STB0899_GPIO13CFG , 0x82 },
+ { STB0899_GPIO14CFG , 0x82 },
+ { STB0899_GPIO15CFG , 0x82 },
+ { STB0899_GPIO16CFG , 0x82 },
+ { STB0899_GPIO17CFG , 0x82 },
+ { STB0899_GPIO18CFG , 0x82 },
+ { STB0899_GPIO19CFG , 0x82 },
+ { STB0899_GPIO20CFG , 0x82 },
+ { STB0899_SDATCFG , 0xb8 },
+ { STB0899_SCLTCFG , 0xba },
+ { STB0899_AGCRFCFG , 0x08 }, /* 0x1c */
+ { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */
+ { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */
+ { STB0899_DIRCLKCFG , 0x82 },
+ { STB0899_CLKOUT27CFG , 0x7e },
+ { STB0899_STDBYCFG , 0x82 },
+ { STB0899_CS0CFG , 0x82 },
+ { STB0899_CS1CFG , 0x82 },
+ { STB0899_DISEQCOCFG , 0x20 },
+ { STB0899_GPIO32CFG , 0x82 },
+ { STB0899_GPIO33CFG , 0x82 },
+ { STB0899_GPIO34CFG , 0x82 },
+ { STB0899_GPIO35CFG , 0x82 },
+ { STB0899_GPIO36CFG , 0x82 },
+ { STB0899_GPIO37CFG , 0x82 },
+ { STB0899_GPIO38CFG , 0x82 },
+ { STB0899_GPIO39CFG , 0x82 },
+ { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
+ { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
+ { STB0899_FILTCTRL , 0x00 },
+ { STB0899_SYSCTRL , 0x00 },
+ { STB0899_STOPCLK1 , 0x20 },
+ { STB0899_STOPCLK2 , 0x00 },
+ { STB0899_INTBUFSTATUS , 0x00 },
+ { STB0899_INTBUFCTRL , 0x0a },
+ { 0xffff , 0xff },
+};
+
+static const struct stb0899_s1_reg knc1_stb0899_s1_init_3[] = {
+ { STB0899_DEMOD , 0x00 },
+ { STB0899_RCOMPC , 0xc9 },
+ { STB0899_AGC1CN , 0x41 },
+ { STB0899_AGC1REF , 0x08 },
+ { STB0899_RTC , 0x7a },
+ { STB0899_TMGCFG , 0x4e },
+ { STB0899_AGC2REF , 0x33 },
+ { STB0899_TLSR , 0x84 },
+ { STB0899_CFD , 0xee },
+ { STB0899_ACLC , 0x87 },
+ { STB0899_BCLC , 0x94 },
+ { STB0899_EQON , 0x41 },
+ { STB0899_LDT , 0xdd },
+ { STB0899_LDT2 , 0xc9 },
+ { STB0899_EQUALREF , 0xb4 },
+ { STB0899_TMGRAMP , 0x10 },
+ { STB0899_TMGTHD , 0x30 },
+ { STB0899_IDCCOMP , 0xfb },
+ { STB0899_QDCCOMP , 0x03 },
+ { STB0899_POWERI , 0x3b },
+ { STB0899_POWERQ , 0x3d },
+ { STB0899_RCOMP , 0x81 },
+ { STB0899_AGCIQIN , 0x80 },
+ { STB0899_AGC2I1 , 0x04 },
+ { STB0899_AGC2I2 , 0xf5 },
+ { STB0899_TLIR , 0x25 },
+ { STB0899_RTF , 0x80 },
+ { STB0899_DSTATUS , 0x00 },
+ { STB0899_LDI , 0xca },
+ { STB0899_CFRM , 0xf1 },
+ { STB0899_CFRL , 0xf3 },
+ { STB0899_NIRM , 0x2a },
+ { STB0899_NIRL , 0x05 },
+ { STB0899_ISYMB , 0x17 },
+ { STB0899_QSYMB , 0xfa },
+ { STB0899_SFRH , 0x2f },
+ { STB0899_SFRM , 0x68 },
+ { STB0899_SFRL , 0x40 },
+ { STB0899_SFRUPH , 0x2f },
+ { STB0899_SFRUPM , 0x68 },
+ { STB0899_SFRUPL , 0x40 },
+ { STB0899_EQUAI1 , 0xfd },
+ { STB0899_EQUAQ1 , 0x04 },
+ { STB0899_EQUAI2 , 0x0f },
+ { STB0899_EQUAQ2 , 0xff },
+ { STB0899_EQUAI3 , 0xdf },
+ { STB0899_EQUAQ3 , 0xfa },
+ { STB0899_EQUAI4 , 0x37 },
+ { STB0899_EQUAQ4 , 0x0d },
+ { STB0899_EQUAI5 , 0xbd },
+ { STB0899_EQUAQ5 , 0xf7 },
+ { STB0899_DSTATUS2 , 0x00 },
+ { STB0899_VSTATUS , 0x00 },
+ { STB0899_VERROR , 0xff },
+ { STB0899_IQSWAP , 0x2a },
+ { STB0899_ECNT1M , 0x00 },
+ { STB0899_ECNT1L , 0x00 },
+ { STB0899_ECNT2M , 0x00 },
+ { STB0899_ECNT2L , 0x00 },
+ { STB0899_ECNT3M , 0x00 },
+ { STB0899_ECNT3L , 0x00 },
+ { STB0899_FECAUTO1 , 0x06 },
+ { STB0899_FECM , 0x01 },
+ { STB0899_VTH12 , 0xf0 },
+ { STB0899_VTH23 , 0xa0 },
+ { STB0899_VTH34 , 0x78 },
+ { STB0899_VTH56 , 0x4e },
+ { STB0899_VTH67 , 0x48 },
+ { STB0899_VTH78 , 0x38 },
+ { STB0899_PRVIT , 0xff },
+ { STB0899_VITSYNC , 0x19 },
+ { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
+ { STB0899_TSULC , 0x42 },
+ { STB0899_RSLLC , 0x40 },
+ { STB0899_TSLPL , 0x12 },
+ { STB0899_TSCFGH , 0x0c },
+ { STB0899_TSCFGM , 0x00 },
+ { STB0899_TSCFGL , 0x0c },
+ { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */
+ { STB0899_RSSYNCDEL , 0x00 },
+ { STB0899_TSINHDELH , 0x02 },
+ { STB0899_TSINHDELM , 0x00 },
+ { STB0899_TSINHDELL , 0x00 },
+ { STB0899_TSLLSTKM , 0x00 },
+ { STB0899_TSLLSTKL , 0x00 },
+ { STB0899_TSULSTKM , 0x00 },
+ { STB0899_TSULSTKL , 0xab },
+ { STB0899_PCKLENUL , 0x00 },
+ { STB0899_PCKLENLL , 0xcc },
+ { STB0899_RSPCKLEN , 0xcc },
+ { STB0899_TSSTATUS , 0x80 },
+ { STB0899_ERRCTRL1 , 0xb6 },
+ { STB0899_ERRCTRL2 , 0x96 },
+ { STB0899_ERRCTRL3 , 0x89 },
+ { STB0899_DMONMSK1 , 0x27 },
+ { STB0899_DMONMSK0 , 0x03 },
+ { STB0899_DEMAPVIT , 0x5c },
+ { STB0899_PLPARM , 0x1f },
+ { STB0899_PDELCTRL , 0x48 },
+ { STB0899_PDELCTRL2 , 0x00 },
+ { STB0899_BBHCTRL1 , 0x00 },
+ { STB0899_BBHCTRL2 , 0x00 },
+ { STB0899_HYSTTHRESH , 0x77 },
+ { STB0899_MATCSTM , 0x00 },
+ { STB0899_MATCSTL , 0x00 },
+ { STB0899_UPLCSTM , 0x00 },
+ { STB0899_UPLCSTL , 0x00 },
+ { STB0899_DFLCSTM , 0x00 },
+ { STB0899_DFLCSTL , 0x00 },
+ { STB0899_SYNCCST , 0x00 },
+ { STB0899_SYNCDCSTM , 0x00 },
+ { STB0899_SYNCDCSTL , 0x00 },
+ { STB0899_ISI_ENTRY , 0x00 },
+ { STB0899_ISI_BIT_EN , 0x00 },
+ { STB0899_MATSTRM , 0x00 },
+ { STB0899_MATSTRL , 0x00 },
+ { STB0899_UPLSTRM , 0x00 },
+ { STB0899_UPLSTRL , 0x00 },
+ { STB0899_DFLSTRM , 0x00 },
+ { STB0899_DFLSTRL , 0x00 },
+ { STB0899_SYNCSTR , 0x00 },
+ { STB0899_SYNCDSTRM , 0x00 },
+ { STB0899_SYNCDSTRL , 0x00 },
+ { STB0899_CFGPDELSTATUS1 , 0x10 },
+ { STB0899_CFGPDELSTATUS2 , 0x00 },
+ { STB0899_BBFERRORM , 0x00 },
+ { STB0899_BBFERRORL , 0x00 },
+ { STB0899_UPKTERRORM , 0x00 },
+ { STB0899_UPKTERRORL , 0x00 },
+ { 0xffff , 0xff },
+};
+
+/* STB0899 demodulator config for the KNC1 and clones */
+static struct stb0899_config knc1_dvbs2_config = {
+ .init_dev = knc1_stb0899_s1_init_1,
+ .init_s2_demod = stb0899_s2_init_2,
+ .init_s1_demod = knc1_stb0899_s1_init_3,
+ .init_s2_fec = stb0899_s2_init_4,
+ .init_tst = stb0899_s1_init_5,
+
+ .postproc = NULL,
+
+ .demod_address = 0x68,
+// .ts_output_mode = STB0899_OUT_PARALLEL, /* types = SERIAL/PARALLEL */
+ .block_sync_mode = STB0899_SYNC_FORCED, /* DSS, SYNC_FORCED/UNSYNCED */
+// .ts_pfbit_toggle = STB0899_MPEG_NORMAL, /* DirecTV, MPEG toggling seq */
+
+ .xtal_freq = 27000000,
+ .inversion = IQ_SWAP_OFF, /* 1 */
+
+ .lo_clk = 76500000,
+ .hi_clk = 90000000,
+
+ .esno_ave = STB0899_DVBS2_ESNO_AVE,
+ .esno_quant = STB0899_DVBS2_ESNO_QUANT,
+ .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE,
+ .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE,
+ .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD,
+ .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ,
+ .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK,
+ .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF,
+ .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
+
+ .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS,
+ .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
+ .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS,
+ .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER,
+
+ .tuner_get_frequency = tda8261_get_frequency,
+ .tuner_set_frequency = tda8261_set_frequency,
+ .tuner_set_bandwidth = NULL,
+ .tuner_get_bandwidth = tda8261_get_bandwidth,
+ .tuner_set_rfsiggain = NULL
+};
+
+/*
+ * SD1878/SHA tuner config
+ * 1F, Single I/P, Horizontal mount, High Sensitivity
+ */
+static const struct tda8261_config sd1878c_config = {
+// .name = "SD1878/SHA",
+ .addr = 0x60,
+ .step_size = TDA8261_STEP_1000 /* kHz */
+};
+
+static u8 read_pwm(struct budget_av *budget_av)
+{
+ u8 b = 0xff;
+ u8 pwm;
+ struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1},
+ {.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1}
+ };
+
+ if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2)
+ || (pwm == 0xff))
+ pwm = 0x48;
+
+ return pwm;
+}
+
+#define SUBID_DVBS_KNC1 0x0010
+#define SUBID_DVBS_KNC1_PLUS 0x0011
+#define SUBID_DVBS_TYPHOON 0x4f56
+#define SUBID_DVBS_CINERGY1200 0x1154
+#define SUBID_DVBS_CYNERGY1200N 0x1155
+#define SUBID_DVBS_TV_STAR 0x0014
+#define SUBID_DVBS_TV_STAR_PLUS_X4 0x0015
+#define SUBID_DVBS_TV_STAR_CI 0x0016
+#define SUBID_DVBS2_KNC1 0x0018
+#define SUBID_DVBS2_KNC1_OEM 0x0019
+#define SUBID_DVBS_EASYWATCH_1 0x001a
+#define SUBID_DVBS_EASYWATCH_2 0x001b
+#define SUBID_DVBS2_EASYWATCH 0x001d
+#define SUBID_DVBS_EASYWATCH 0x001e
+
+#define SUBID_DVBC_EASYWATCH 0x002a
+#define SUBID_DVBC_EASYWATCH_MK3 0x002c
+#define SUBID_DVBC_KNC1 0x0020
+#define SUBID_DVBC_KNC1_PLUS 0x0021
+#define SUBID_DVBC_KNC1_MK3 0x0022
+#define SUBID_DVBC_KNC1_TDA10024 0x0028
+#define SUBID_DVBC_KNC1_PLUS_MK3 0x0023
+#define SUBID_DVBC_CINERGY1200 0x1156
+#define SUBID_DVBC_CINERGY1200_MK3 0x1176
+
+#define SUBID_DVBT_EASYWATCH 0x003a
+#define SUBID_DVBT_KNC1_PLUS 0x0031
+#define SUBID_DVBT_KNC1 0x0030
+#define SUBID_DVBT_CINERGY1200 0x1157
+
+static void frontend_init(struct budget_av *budget_av)
+{
+ struct saa7146_dev * saa = budget_av->budget.dev;
+ struct dvb_frontend * fe = NULL;
+
+ /* Enable / PowerON Frontend */
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+
+ /* Wait for PowerON */
+ msleep(100);
+
+ /* additional setup necessary for the PLUS cards */
+ switch (saa->pci->subsystem_device) {
+ case SUBID_DVBS_KNC1_PLUS:
+ case SUBID_DVBC_KNC1_PLUS:
+ case SUBID_DVBT_KNC1_PLUS:
+ case SUBID_DVBC_EASYWATCH:
+ case SUBID_DVBC_KNC1_PLUS_MK3:
+ case SUBID_DVBS2_KNC1:
+ case SUBID_DVBS2_KNC1_OEM:
+ case SUBID_DVBS2_EASYWATCH:
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
+ break;
+ }
+
+ switch (saa->pci->subsystem_device) {
+
+ case SUBID_DVBS_KNC1:
+ /*
+ * maybe that setting is needed for other dvb-s cards as well,
+ * but so far it has been only confirmed for this type
+ */
+ budget_av->reinitialise_demod = 1;
+ /* fall through */
+ case SUBID_DVBS_KNC1_PLUS:
+ case SUBID_DVBS_EASYWATCH_1:
+ if (saa->pci->subsystem_vendor == 0x1894) {
+ fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config,
+ &budget_av->budget.i2c_adap);
+ if (fe) {
+ dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap);
+ }
+ } else {
+ fe = dvb_attach(stv0299_attach, &typhoon_config,
+ &budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
+ }
+ }
+ break;
+
+ case SUBID_DVBS_TV_STAR:
+ case SUBID_DVBS_TV_STAR_PLUS_X4:
+ case SUBID_DVBS_TV_STAR_CI:
+ case SUBID_DVBS_CYNERGY1200N:
+ case SUBID_DVBS_EASYWATCH:
+ case SUBID_DVBS_EASYWATCH_2:
+ fe = dvb_attach(stv0299_attach, &philips_sd1878_config,
+ &budget_av->budget.i2c_adap);
+ if (fe) {
+ dvb_attach(dvb_pll_attach, fe, 0x60,
+ &budget_av->budget.i2c_adap,
+ DVB_PLL_PHILIPS_SD1878_TDA8261);
+ }
+ break;
+
+ case SUBID_DVBS_TYPHOON:
+ fe = dvb_attach(stv0299_attach, &typhoon_config,
+ &budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
+ }
+ break;
+ case SUBID_DVBS2_KNC1:
+ case SUBID_DVBS2_KNC1_OEM:
+ case SUBID_DVBS2_EASYWATCH:
+ budget_av->reinitialise_demod = 1;
+ if ((fe = dvb_attach(stb0899_attach, &knc1_dvbs2_config, &budget_av->budget.i2c_adap)))
+ dvb_attach(tda8261_attach, fe, &sd1878c_config, &budget_av->budget.i2c_adap);
+
+ break;
+ case SUBID_DVBS_CINERGY1200:
+ fe = dvb_attach(stv0299_attach, &cinergy_1200s_config,
+ &budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
+ }
+ break;
+
+ case SUBID_DVBC_KNC1:
+ case SUBID_DVBC_KNC1_PLUS:
+ case SUBID_DVBC_CINERGY1200:
+ case SUBID_DVBC_EASYWATCH:
+ budget_av->reinitialise_demod = 1;
+ budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
+ fe = dvb_attach(tda10021_attach, &philips_cu1216_config,
+ &budget_av->budget.i2c_adap,
+ read_pwm(budget_av));
+ if (fe == NULL)
+ fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress,
+ &budget_av->budget.i2c_adap,
+ read_pwm(budget_av));
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
+ }
+ break;
+
+ case SUBID_DVBC_EASYWATCH_MK3:
+ case SUBID_DVBC_CINERGY1200_MK3:
+ case SUBID_DVBC_KNC1_MK3:
+ case SUBID_DVBC_KNC1_TDA10024:
+ case SUBID_DVBC_KNC1_PLUS_MK3:
+ budget_av->reinitialise_demod = 1;
+ budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
+ fe = dvb_attach(tda10023_attach,
+ &philips_cu1216_tda10023_config,
+ &budget_av->budget.i2c_adap,
+ read_pwm(budget_av));
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
+ }
+ break;
+
+ case SUBID_DVBT_EASYWATCH:
+ case SUBID_DVBT_KNC1:
+ case SUBID_DVBT_KNC1_PLUS:
+ case SUBID_DVBT_CINERGY1200:
+ budget_av->reinitialise_demod = 1;
+ fe = dvb_attach(tda10046_attach, &philips_tu1216_config,
+ &budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.init = philips_tu1216_tuner_init;
+ fe->ops.tuner_ops.set_params = philips_tu1216_tuner_set_params;
+ }
+ break;
+ }
+
+ if (fe == NULL) {
+ pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
+ saa->pci->vendor,
+ saa->pci->device,
+ saa->pci->subsystem_vendor,
+ saa->pci->subsystem_device);
+ return;
+ }
+
+ budget_av->budget.dvb_frontend = fe;
+
+ if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
+ budget_av->budget.dvb_frontend)) {
+ pr_err("Frontend registration failed!\n");
+ dvb_frontend_detach(budget_av->budget.dvb_frontend);
+ budget_av->budget.dvb_frontend = NULL;
+ }
+}
+
+
+static void budget_av_irq(struct saa7146_dev *dev, u32 * isr)
+{
+ struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
+
+ dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av);
+
+ if (*isr & MASK_10)
+ ttpci_budget_irq10_handler(dev, isr);
+}
+
+static int budget_av_detach(struct saa7146_dev *dev)
+{
+ struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
+ int err;
+
+ dprintk(2, "dev: %p\n", dev);
+
+ if (1 == budget_av->has_saa7113) {
+ saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
+
+ msleep(200);
+
+ saa7146_unregister_device(&budget_av->vd, dev);
+
+ saa7146_vv_release(dev);
+ }
+
+ if (budget_av->budget.ci_present)
+ ciintf_deinit(budget_av);
+
+ if (budget_av->budget.dvb_frontend != NULL) {
+ dvb_unregister_frontend(budget_av->budget.dvb_frontend);
+ dvb_frontend_detach(budget_av->budget.dvb_frontend);
+ }
+ err = ttpci_budget_deinit(&budget_av->budget);
+
+ kfree(budget_av);
+
+ return err;
+}
+
+#define KNC1_INPUTS 2
+static struct v4l2_input knc1_inputs[KNC1_INPUTS] = {
+ { 0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0,
+ V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+ { 1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0,
+ V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+};
+
+static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
+{
+ dprintk(1, "VIDIOC_ENUMINPUT %d\n", i->index);
+ if (i->index >= KNC1_INPUTS)
+ return -EINVAL;
+ memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input));
+ return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *fh, unsigned int *i)
+{
+ struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+ struct budget_av *budget_av = (struct budget_av *)dev->ext_priv;
+
+ *i = budget_av->cur_input;
+
+ dprintk(1, "VIDIOC_G_INPUT %d\n", *i);
+ return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
+{
+ struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+ struct budget_av *budget_av = (struct budget_av *)dev->ext_priv;
+
+ dprintk(1, "VIDIOC_S_INPUT %d\n", input);
+ return saa7113_setinput(budget_av, input);
+}
+
+static struct saa7146_ext_vv vv_data;
+
+static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
+{
+ struct budget_av *budget_av;
+ u8 *mac;
+ int err;
+
+ dprintk(2, "dev: %p\n", dev);
+
+ if (!(budget_av = kzalloc(sizeof(struct budget_av), GFP_KERNEL)))
+ return -ENOMEM;
+
+ budget_av->has_saa7113 = 0;
+ budget_av->budget.ci_present = 0;
+
+ dev->ext_priv = budget_av;
+
+ err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE,
+ adapter_nr);
+ if (err) {
+ kfree(budget_av);
+ return err;
+ }
+
+ /* knc1 initialization */
+ saa7146_write(dev, DD1_STREAM_B, 0x04000000);
+ saa7146_write(dev, DD1_INIT, 0x07000600);
+ saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
+
+ if (saa7113_init(budget_av) == 0) {
+ budget_av->has_saa7113 = 1;
+
+ if (0 != saa7146_vv_init(dev, &vv_data)) {
+ /* fixme: proper cleanup here */
+ ERR("cannot init vv subsystem\n");
+ return err;
+ }
+ vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
+ vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
+ vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
+
+ if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) {
+ /* fixme: proper cleanup here */
+ ERR("cannot register capture v4l2 device\n");
+ saa7146_vv_release(dev);
+ return err;
+ }
+
+ /* beware: this modifies dev->vv ... */
+ saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A,
+ SAA7146_HPS_SYNC_PORT_A);
+
+ saa7113_setinput(budget_av, 0);
+ }
+
+ /* fixme: find some sane values here... */
+ saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
+
+ mac = budget_av->budget.dvb_adapter.proposed_mac;
+ if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
+ pr_err("KNC1-%d: Could not read MAC from KNC1 card\n",
+ budget_av->budget.dvb_adapter.num);
+ memset(mac, 0, 6);
+ } else {
+ pr_info("KNC1-%d: MAC addr = %pM\n",
+ budget_av->budget.dvb_adapter.num, mac);
+ }
+
+ budget_av->budget.dvb_adapter.priv = budget_av;
+ frontend_init(budget_av);
+ ciintf_init(budget_av);
+
+ ttpci_budget_init_hooks(&budget_av->budget);
+
+ return 0;
+}
+
+static struct saa7146_standard standard[] = {
+ {.name = "PAL",.id = V4L2_STD_PAL,
+ .v_offset = 0x17,.v_field = 288,
+ .h_offset = 0x14,.h_pixels = 680,
+ .v_max_out = 576,.h_max_out = 768 },
+
+ {.name = "NTSC",.id = V4L2_STD_NTSC,
+ .v_offset = 0x16,.v_field = 240,
+ .h_offset = 0x06,.h_pixels = 708,
+ .v_max_out = 480,.h_max_out = 640, },
+};
+
+static struct saa7146_ext_vv vv_data = {
+ .inputs = 2,
+ .capabilities = 0, // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
+ .flags = 0,
+ .stds = &standard[0],
+ .num_stds = ARRAY_SIZE(standard),
+};
+
+static struct saa7146_extension budget_extension;
+
+MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(knc1s2,"KNC1 DVB-S2", BUDGET_KNC1S2);
+MAKE_BUDGET_INFO(sates2,"Satelco EasyWatch DVB-S2", BUDGET_KNC1S2);
+MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
+MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
+MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
+MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR);
+MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(satewps, "Satelco EasyWatch DVB-S", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP);
+MAKE_BUDGET_INFO(satewcmk3, "Satelco EasyWatch DVB-C MK3", BUDGET_KNC1C_MK3);
+MAKE_BUDGET_INFO(satewt, "Satelco EasyWatch DVB-T", BUDGET_KNC1T);
+MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
+MAKE_BUDGET_INFO(knc1spx4, "KNC1 DVB-S Plus X4", BUDGET_KNC1SP);
+MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
+MAKE_BUDGET_INFO(knc1cmk3, "KNC1 DVB-C MK3", BUDGET_KNC1C_MK3);
+MAKE_BUDGET_INFO(knc1ctda10024, "KNC1 DVB-C TDA10024", BUDGET_KNC1C_TDA10024);
+MAKE_BUDGET_INFO(knc1cpmk3, "KNC1 DVB-C Plus MK3", BUDGET_KNC1CP_MK3);
+MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
+MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
+MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
+MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
+MAKE_BUDGET_INFO(cin1200cmk3, "Terratec Cinergy 1200 DVB-C MK3", BUDGET_CIN1200C_MK3);
+MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
+
+static struct pci_device_id pci_tbl[] = {
+ MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
+ MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
+ MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010),
+ MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
+ MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011),
+ MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014),
+ MAKE_EXTENSION_PCI(knc1spx4, 0x1894, 0x0015),
+ MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
+ MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0018),
+ MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0019),
+ MAKE_EXTENSION_PCI(sates2, 0x1894, 0x001d),
+ MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
+ MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a),
+ MAKE_EXTENSION_PCI(satewps, 0x1894, 0x001b),
+ MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a),
+ MAKE_EXTENSION_PCI(satewcmk3, 0x1894, 0x002c),
+ MAKE_EXTENSION_PCI(satewt, 0x1894, 0x003a),
+ MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
+ MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
+ MAKE_EXTENSION_PCI(knc1cmk3, 0x1894, 0x0022),
+ MAKE_EXTENSION_PCI(knc1ctda10024, 0x1894, 0x0028),
+ MAKE_EXTENSION_PCI(knc1cpmk3, 0x1894, 0x0023),
+ MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
+ MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
+ MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
+ MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155),
+ MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
+ MAKE_EXTENSION_PCI(cin1200cmk3, 0x153b, 0x1176),
+ MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
+ {
+ .vendor = 0,
+ }
+};
+
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+static struct saa7146_extension budget_extension = {
+ .name = "budget_av",
+ .flags = SAA7146_USE_I2C_IRQ,
+
+ .pci_tbl = pci_tbl,
+
+ .module = THIS_MODULE,
+ .attach = budget_av_attach,
+ .detach = budget_av_detach,
+
+ .irq_mask = MASK_10,
+ .irq_func = budget_av_irq,
+};
+
+static int __init budget_av_init(void)
+{
+ return saa7146_register_extension(&budget_extension);
+}
+
+static void __exit budget_av_exit(void)
+{
+ saa7146_unregister_extension(&budget_extension);
+}
+
+module_init(budget_av_init);
+module_exit(budget_av_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
+MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
+ "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 12:56:56 +0000