summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2024-01-20Merge tag 'coccinelle-for-6.8' of ↵Linus Torvalds1-9/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux Pull coccinelle updates from Julia Lawall: "Updates to the device_attr_show semantic patch to reflect the new guidelines of the Linux kernel documentation. The problem was identified by Li Zhijian <lizhijian@fujitsu.com>, who proposed an initial fix" * tag 'coccinelle-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: coccinelle: device_attr_show: simplify patch case coccinelle: device_attr_show: Adapt to the latest Documentation/filesystems/sysfs.rst
2024-01-20coccinelle: device_attr_show: simplify patch caseJulia Lawall1-8/+3
Replacing the final expression argument by ... allows the format string to have multiple arguments. It also has the advantage of allowing the change to be recognized as a change in a single statement, thus avoiding adding unneeded braces. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
2024-01-19Merge tag 'loongarch-6.8' of ↵Linus Torvalds3-2/+26
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Raise minimum clang version to 18.0.0 - Enable initial Rust support for LoongArch - Add built-in dtb support for LoongArch - Use generic interface to support crashkernel=X,[high,low] - Some bug fixes and other small changes - Update the default config file. * tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits) MAINTAINERS: Add BPF JIT for LOONGARCH entry LoongArch: Update Loongson-3 default config file LoongArch: BPF: Prevent out-of-bounds memory access LoongArch: BPF: Support 64-bit pointers to kfuncs LoongArch: Fix definition of ftrace_regs_set_instruction_pointer() LoongArch: Use generic interface to support crashkernel=X,[high,low] LoongArch: Fix and simplify fcsr initialization on execve() LoongArch: Let cores_io_master cover the largest NR_CPUS LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE LoongArch: Add a missing call to efi_esrt_init() LoongArch: Parsing CPU-related information from DTS LoongArch: dts: DeviceTree for Loongson-2K2000 LoongArch: dts: DeviceTree for Loongson-2K1000 LoongArch: dts: DeviceTree for Loongson-2K0500 LoongArch: Allow device trees be built into the kernel dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names dt-bindings: loongarch: Add Loongson SoC boards compatibles dt-bindings: loongarch: Add CPU bindings for LoongArch LoongArch: Enable initial Rust support ...
2024-01-19coccinelle: device_attr_show: Adapt to the latest ↵Li Zhijian1-9/+13
Documentation/filesystems/sysfs.rst Adapt description, warning message and MODE=patch according to the latest Documentation/filesystems/sysfs.rst: > show() should only use sysfs_emit() or sysfs_emit_at() when formatting > the value to be returned to user space. After this patch: When MODE=report, $ make coccicheck COCCI=scripts/coccinelle/api/device_attr_show.cocci M=drivers/hid/hid-picolcd_core.c MODE=report <...snip...> drivers/hid/hid-picolcd_core.c:304:8-16: WARNING: please use sysfs_emit or sysfs_emit_at drivers/hid/hid-picolcd_core.c:259:9-17: WARNING: please use sysfs_emit or sysfs_emit_at When MODE=patch, $ make coccicheck COCCI=scripts/coccinelle/api/device_attr_show.cocci M=drivers/hid/hid-picolcd_core.c MODE=patch <...snip...> diff -u -p a/drivers/hid/hid-picolcd_core.c b/drivers/hid/hid-picolcd_core.c --- a/drivers/hid/hid-picolcd_core.c +++ b/drivers/hid/hid-picolcd_core.c @@ -255,10 +255,12 @@ static ssize_t picolcd_operation_mode_sh { struct picolcd_data *data = dev_get_drvdata(dev); - if (data->status & PICOLCD_BOOTLOADER) - return snprintf(buf, PAGE_SIZE, "[bootloader] lcd\n"); - else - return snprintf(buf, PAGE_SIZE, "bootloader [lcd]\n"); + if (data->status & PICOLCD_BOOTLOADER) { + return sysfs_emit(buf, "[bootloader] lcd\n"); + } + else { + return sysfs_emit(buf, "bootloader [lcd]\n"); + } } static ssize_t picolcd_operation_mode_store(struct device *dev, @@ -301,7 +303,7 @@ static ssize_t picolcd_operation_mode_de { struct picolcd_data *data = dev_get_drvdata(dev); - return snprintf(buf, PAGE_SIZE, "hello world\n"); + return sysfs_emit(buf, "hello world\n"); } static ssize_t picolcd_operation_mode_delay_store(struct device *dev, CC: Julia Lawall <Julia.Lawall@inria.fr> CC: Nicolas Palix <nicolas.palix@imag.fr> CC: cocci@inria.fr Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
2024-01-18Merge tag 'kbuild-v6.8' of ↵Linus Torvalds35-453/+922
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Make Kconfig parse the input .config more precisely - Support W=c and W=e options for Kconfig - Set Kconfig int/hex symbols to zero if the 'default' property is missing - Add .editorconfig - Add scripts/git.orderFile - Add a script to detect backward-incompatible changes in UAPI headers - Resolve the symlink passed to O= option properly - Use the user-supplied mtime for all files in the builtin initramfs, which provides better reproducible builds - Fix the direct execution of debian/rules for Debian package builds - Use build ID instead of the .gnu_debuglink section for the Debian dbg package * tag 'kbuild-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (53 commits) kbuild: deb-pkg: use debian/<package> for tmpdir kbuild: deb-pkg: move 'make headers' to build-arch kbuild: deb-pkg: do not search for 'scripts' directory under arch/ kbuild: deb-pkg: use build ID instead of debug link for dbg package kbuild: deb-pkg: use more debhelper commands in builddeb kbuild: deb-pkg: remove unneeded '-f $srctree/Makefile' in debian/rules kbuild: deb-pkg: allow to run debian/rules from output directory kbuild: deb-pkg: set DEB_* variables if debian/rules is directly executed kbuild: deb-pkg: squash scripts/package/deb-build-option to debian/rules kbuild: deb-pkg: factor out common Make options in debian/rules kbuild: deb-pkg: hard-code Build-Depends kbuild: deb-pkg: split debian/copyright from the mkdebian script gen_init_cpio: Apply mtime supplied by user to all file types kbuild: resolve symlinks for O= properly docs: dev-tools: Add UAPI checker documentation check-uapi: Introduce check-uapi.sh scripts: Introduce a default git.orderFile kconfig: WERROR unmet symbol dependency Add .editorconfig file for basic formatting kconfig: Use KCONFIG_CONFIG instead of .config ...
2024-01-17Merge tag 'char-misc-6.8-rc1' of ↵Linus Torvalds2-11/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ...
2024-01-17Merge tag 'mm-hotfixes-stable-2024-01-12-16-52' of ↵Linus Torvalds1-2/+17
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc hotfixes from Andrew Morton: "For once not mostly MM-related. 17 hotfixes. 10 address post-6.7 issues and the other 7 are cc:stable" * tag 'mm-hotfixes-stable-2024-01-12-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: userfaultfd: avoid huge_zero_page in UFFDIO_MOVE MAINTAINERS: add entry for shrinker selftests: mm: hugepage-vmemmap fails on 64K page size systems mm/memory_hotplug: fix memmap_on_memory sysfs value retrieval mailmap: switch email for Tanzir Hasan mailmap: add old address mappings for Randy kernel/crash_core.c: make __crash_hotplug_lock static efi: disable mirror feature during crashkernel kexec: do syscore_shutdown() in kernel_kexec mailmap: update entry for Manivannan Sadhasivam fs/proc/task_mmu: move mmu notification mechanism inside mm lock mm: zswap: switch maintainers to recently active developers and reviewers scripts/decode_stacktrace.sh: optionally use LLVM utilities kasan: avoid resetting aux_lock lib/Kconfig.debug: disable CONFIG_DEBUG_INFO_BTF for Hexagon MAINTAINERS: update LTP maintainers kdump: defer the insertion of crashkernel resources
2024-01-17LoongArch: Enable initial Rust supportWANG Rui1-0/+7
Enable initial Rust support for LoongArch. Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17scripts/min-tool-version.sh: Raise minimum clang version to 18.0.0 for loongarchWANG Rui1-0/+2
The existing mainline clang development version encounters difficulties compiling the LoongArch kernel module. It is anticipated that this issue will be resolved in the upcoming 18.0.0 release. To prevent user confusion arising from broken builds, it is advisable to raise the minimum required clang version for LoongArch to 18.0.0. Suggested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1941 Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17modpost: Ignore relaxation and alignment marker relocs on LoongArchWANG Xuerui1-2/+17
With recent trunk versions of binutils and gcc, alignment directives are represented with R_LARCH_ALIGN relocs on LoongArch, which is necessary for the linker to maintain alignment requirements during its relaxation passes. And even though the kernel is built with relaxation disabled, so far a small number of R_LARCH_RELAX marker relocs are still emitted as part of la.* pseudo instructions in assembly. These two kinds of relocs do not refer to symbols, which can trip up modpost's section mismatch checks, because the r_offset of said relocs can be zero or any other meaningless value, eventually leading to a `from == NULL` condition in default_mismatch_handler and SIGSEGV. As the two kinds of relocs are not concerned with symbols, just ignore them for section mismatch check purposes. Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-12scripts/decode_stacktrace.sh: optionally use LLVM utilitiesCarlos Llamas1-2/+17
GNU's addr2line can have problems parsing a vmlinux built with LLVM, particularly when LTO was used. In order to decode the traces correctly this patch adds the ability to switch to LLVM's utilities readelf and addr2line. The same approach is followed by Will in [1]. Before: $ scripts/decode_stacktrace.sh vmlinux < kernel.log [17716.240635] Call trace: [17716.240646] skb_cow_data (??:?) [17716.240654] esp6_input (ld-temp.o:?) [17716.240666] xfrm_input (ld-temp.o:?) [17716.240674] xfrm6_rcv (??:?) [...] After: $ LLVM=1 scripts/decode_stacktrace.sh vmlinux < kernel.log [17716.240635] Call trace: [17716.240646] skb_cow_data (include/linux/skbuff.h:2172 net/core/skbuff.c:4503) [17716.240654] esp6_input (net/ipv6/esp6.c:977) [17716.240666] xfrm_input (net/xfrm/xfrm_input.c:659) [17716.240674] xfrm6_rcv (net/ipv6/xfrm6_input.c:172) [...] Note that one could set CROSS_COMPILE=llvm- instead to hack around this issue. However, doing so can break the decodecode routine as it will force the selection of other LLVM utilities down the line e.g. llvm-as. [1] https://lore.kernel.org/all/20230914131225.13415-3-will@kernel.org/ Link: https://lkml.kernel.org/r/20230929034836.403735-1-cmllamas@google.com Signed-off-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Elliot Berman <quic_eberman@quicinc.com> Tested-by: Justin Stitt <justinstitt@google.com> Cc: Will Deacon <will@kernel.org> Cc: John Stultz <jstultz@google.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Tom Rix <trix@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-11Merge tag 'docs-6.8' of git://git.lwn.net/linuxLinus Torvalds3-13/+15
Pull documentation update from Jonathan Corbet: "Another moderately busy cycle for documentation, including: - The minimum Sphinx requirement has been raised to 2.4.4, following a warning that was added in 6.2 - Some reworking of the Documentation/process front page to, hopefully, make it more useful - Various kernel-doc tweaks to, for example, make it deal properly with __counted_by annotations - We have also restored a warning for documentation of nonexistent structure members that disappeared a while back. That had the delightful consequence of adding some 600 warnings to the docs build. A sustained effort by Randy, Vegard, and myself has addressed almost all of those, bringing the documentation back into sync with the code. The fixes are going through the appropriate maintainer trees - Various improvements to the HTML rendered docs, including automatic links to Git revisions and a nice new pulldown to make translations easy to access - Speaking of translations, more of those for Spanish and Chinese ... plus the usual stream of documentation updates and typo fixes" * tag 'docs-6.8' of git://git.lwn.net/linux: (57 commits) MAINTAINERS: use tabs for indent of CONFIDENTIAL COMPUTING THREAT MODEL A reworked process/index.rst ring-buffer/Documentation: Add documentation on buffer_percent file Translated the RISC-V architecture boot documentation. Docs: remove mentions of fdformat from util-linux Docs/zh_CN: Fix the meaning of DEBUG to pr_debug() Documentation: move driver-api/dcdbas to userspace-api/ Documentation: move driver-api/isapnp to userspace-api/ Documentation/core-api : fix typo in workqueue Documentation/trace: Fixed typos in the ftrace FLAGS section kernel-doc: handle a void function without producing a warning scripts/get_abi.pl: ignore some temp files docs: kernel_abi.py: fix command injection scripts/get_abi: fix source path leak CREDITS, MAINTAINERS, docs/process/howto: Update man-pages' maintainer docs: translations: add translations links when they exist kernel-doc: Align quick help and the code MAINTAINERS: add reviewer for Spanish translations docs: ignore __counted_by attribute in structure definitions scripts: kernel-doc: Clarify missing struct member description ..
2024-01-11Merge tag 'rust-6.8' of https://github.com/Rust-for-Linux/linuxLinus Torvalds2-1/+2
Pull Rust updates from Miguel Ojeda: "Another routine one in terms of features. In terms of lines, this time the 'alloc' version upgrade is less prominent, given that it was fairly small (and we did not have two upgrades) Toolchain and infrastructure: - Upgrade to Rust 1.74.1 The patch release includes a fix for an ICE that the Apple AGX GPU driver was hitting - Support 'srctree'-relative links in Rust code documentation - Automate part of the manual constants handling (i.e. the ones not recognised by 'bindgen') - Suppress searching builtin sysroot to avoid confusion with installed sysroots, needed for the to-be-merged arm64 support which uses a builtin target - Ignore '__preserve_most' functions for 'bindgen' - Reduce header inclusion bloat in exports 'kernel' crate: - Implement 'Debug' for 'CString' - Make 'CondVar::wait()' an uninterruptible wait 'macros' crate: - Update 'paste!' to accept string literals - Improve '#[vtable]' documentation Documentation: - Add testing section (KUnit and 'rusttest' target) - Remove 'CC=clang' mentions - Clarify that 'rustup override' applies to build directory" * tag 'rust-6.8' of https://github.com/Rust-for-Linux/linux: docs: rust: Clarify that 'rustup override' applies to build directory docs: rust: Add rusttest info docs: rust: remove `CC=clang` mentions rust: support `srctree`-relative links rust: sync: Makes `CondVar::wait()` an uninterruptible wait rust: upgrade to Rust 1.74.1 rust: Suppress searching builtin sysroot rust: macros: improve `#[vtable]` documentation rust: macros: update 'paste!' macro to accept string literals rust: bindings: rename const binding using sed rust: Ignore preserve-most functions rust: replace <linux/module.h> with <linux/export.h> in rust/exports.c rust: kernel: str: Implement Debug for CString
2024-01-11Merge tag 'net-next-6.8' of ↵Linus Torvalds2-0/+24
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "The most interesting thing is probably the networking structs reorganization and a significant amount of changes is around self-tests. Core & protocols: - Analyze and reorganize core networking structs (socks, netdev, netns, mibs) to optimize cacheline consumption and set up build time warnings to safeguard against future header changes This improves TCP performances with many concurrent connections up to 40% - Add page-pool netlink-based introspection, exposing the memory usage and recycling stats. This helps indentify bad PP users and possible leaks - Refine TCP/DCCP source port selection to no longer favor even source port at connect() time when IP_LOCAL_PORT_RANGE is set. This lowers the time taken by connect() for hosts having many active connections to the same destination - Refactor the TCP bind conflict code, shrinking related socket structs - Refactor TCP SYN-Cookie handling, as a preparation step to allow arbitrary SYN-Cookie processing via eBPF - Tune optmem_max for 0-copy usage, increasing the default value to 128KB and namespecifying it - Allow coalescing for cloned skbs coming from page pools, improving RX performances with some common configurations - Reduce extension header parsing overhead at GRO time - Add bridge MDB bulk deletion support, allowing user-space to request the deletion of matching entries - Reorder nftables struct members, to keep data accessed by the datapath first - Introduce TC block ports tracking and use. This allows supporting multicast-like behavior at the TC layer - Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and classifiers (RSVP and tcindex) - More data-race annotations - Extend the diag interface to dump TCP bound-only sockets - Conditional notification of events for TC qdisc class and actions - Support for WPAN dynamic associations with nearby devices, to form a sub-network using a specific PAN ID - Implement SMCv2.1 virtual ISM device support - Add support for Batman-avd mulicast packet type BPF: - Tons of verifier improvements: - BPF register bounds logic and range support along with a large test suite - log improvements - complete precision tracking support for register spills - track aligned STACK_ZERO cases as imprecise spilled registers. This improves the verifier "instructions processed" metric from single digit to 50-60% for some programs - support for user's global BPF subprogram arguments with few commonly requested annotations for a better developer experience - support tracking of BPF_JNE which helps cases when the compiler transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like - several fixes - Add initial TX metadata implementation for AF_XDP with support in mlx5 and stmmac drivers. Two types of offloads are supported right now, that is, TX timestamp and TX checksum offload - Fix kCFI bugs in BPF all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y - Change BPF verifier logic to validate global subprograms lazily instead of unconditionally before the main program, so they can be guarded using BPF CO-RE techniques - Support uid/gid options when mounting bpffs - Add a new kfunc which acquires the associated cgroup of a task within a specific cgroup v1 hierarchy where the latter is identified by its id - Extend verifier to allow bpf_refcount_acquire() of a map value field obtained via direct load which is a use-case needed in sched_ext - Add BPF link_info support for uprobe multi link along with bpftool integration for the latter - Support for VLAN tag in XDP hints - Remove deprecated bpfilter kernel leftovers given the project is developed in user-space (https://github.com/facebook/bpfilter) Misc: - Support for parellel TC self-tests execution - Increase MPTCP self-tests coverage - Updated the bridge documentation, including several so-far undocumented features - Convert all the net self-tests to run in unique netns, to avoid random failures due to conflict and allow concurrent runs - Add TCP-AO self-tests - Add kunit tests for both cfg80211 and mac80211 - Autogenerate Netlink families documentation from YAML spec - Add yml-gen support for fixed headers and recursive nests, the tool can now generate user-space code for all genetlink families for which we have specs - A bunch of additional module descriptions fixes - Catch incorrect freeing of pages belonging to a page pool Driver API: - Rust abstractions for network PHY drivers; do not cover yet the full C API, but already allow implementing functional PHY drivers in rust - Introduce queue and NAPI support in the netdev Netlink interface, allowing complete access to the device <> NAPIs <> queues relationship - Introduce notifications filtering for devlink to allow control application scale to thousands of instances - Improve PHY validation, requesting rate matching information for each ethtool link mode supported by both the PHY and host - Add support for ethtool symmetric-xor RSS hash - ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD platform - Expose pin fractional frequency offset value over new DPLL generic netlink attribute - Convert older drivers to platform remove callback returning void - Add support for PHY package MMD read/write New hardware / drivers: - Ethernet: - Octeon CN10K devices - Broadcom 5760X P7 - Qualcomm SM8550 SoC - Texas Instrument DP83TG720S PHY - Bluetooth: - IMC Networks Bluetooth radio Removed: - WiFi: - libertas 16-bit PCMCIA support - Atmel at76c50x drivers - HostAP ISA/PCMCIA style 802.11b driver - zd1201 802.11b USB dongles - Orinoco ISA/PCMCIA 802.11b driver - Aviator/Raytheon driver - Planet WL3501 driver - RNDIS USB 802.11b driver Driver updates: - Ethernet high-speed NICs: - Intel (100G, ice, idpf): - allow one by one port representors creation and removal - add temperature and clock information reporting - add get/set for ethtool's header split ringparam - add again FW logging - adds support switchdev hardware packet mirroring - iavf: implement symmetric-xor RSS hash - igc: add support for concurrent physical and free-running timers - i40e: increase the allowable descriptors - nVidia/Mellanox: - Preparation for Socket-Direct multi-dev netdev. That will allow in future releases combining multiple PFs devices attached to different NUMA nodes under the same netdev - Broadcom (bnxt): - TX completion handling improvements - add basic ntuple filter support - reduce MSIX vectors usage for MQPRIO offload - add VXLAN support, USO offload and TX coalesce completion for P7 - Marvell Octeon EP: - xmit-more support - add PF-VF mailbox support and use it for FW notifications for VFs - Wangxun (ngbe/txgbe): - implement ethtool functions to operate pause param, ring param, coalesce channel number and msglevel - Netronome/Corigine (nfp): - add flow-steering support - support UDP segmentation offload - Ethernet NICs embedded, slower, virtual: - Xilinx AXI: remove duplicate DMA code adopting the dma engine driver - stmmac: add support for HW-accelerated VLAN stripping - TI AM654x sw: add mqprio, frame preemption & coalescing - gve: add support for non-4k page sizes. - virtio-net: support dynamic coalescing moderation - nVidia/Mellanox Ethernet datacenter switches: - allow firmware upgrade without a reboot - more flexible support for bridge flooding via the compressed FID flooding mode - Ethernet embedded switches: - Microchip: - fine-tune flow control and speed configurations in KSZ8xxx - KSZ88X3: enable setting rmii reference - Renesas: - add jumbo frames support - Marvell: - 88E6xxx: add "eth-mac" and "rmon" stats support - Ethernet PHYs: - aquantia: add firmware load support - at803x: refactor the driver to simplify adding support for more chip variants - NXP C45 TJA11xx: Add MACsec offload support - Wifi: - MediaTek (mt76): - NVMEM EEPROM improvements - mt7996 Extremely High Throughput (EHT) improvements - mt7996 Wireless Ethernet Dispatcher (WED) support - mt7996 36-bit DMA support - Qualcomm (ath12k): - support for a single MSI vector - WCN7850: support AP mode - Intel (iwlwifi): - new debugfs file fw_dbg_clear - allow concurrent P2P operation on DFS channels - Bluetooth: - QCA2066: support HFP offload - ISO: more broadcast-related improvements - NXP: better recovery in case receiver/transmitter get out of sync" * tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits) lan78xx: remove redundant statement in lan78xx_get_eee lan743x: remove redundant statement in lan743x_ethtool_get_eee bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer() bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel() bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter() tcp: Revert no longer abort SYN_SENT when receiving some ICMP Revert "mlx5 updates 2023-12-20" Revert "net: stmmac: Enable Per DMA Channel interrupt" ipvlan: Remove usage of the deprecated ida_simple_xx() API ipvlan: Fix a typo in a comment net/sched: Remove ipt action tests net: stmmac: Use interrupt mode INTM=1 for per channel irq net: stmmac: Add support for TX/RX channel interrupt net: stmmac: Make MSI interrupt routine generic dt-bindings: net: snps,dwmac: per channel irq net: phy: at803x: make read_status more generic net: phy: at803x: add support for cdt cross short test for qca808x net: phy: at803x: refactor qca808x cable test get status function net: phy: at803x: generalize cdt fault length function net: ethernet: cortina: Drop TSO support ...
2024-01-10Merge tag 'asm-generic-6.8' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "A series from Baoquan He cleans up the asm-generic/io.h to remove the ioremap_uc() definition from everything except x86, which still needs it for pre-PAT systems. This series notably contains a patch from Jiaxun Yang that converts MIPS to use asm-generic/io.h like every other architecture does, enabling future cleanups. Some of my own patches fix -Wmissing-prototype warnings in architecture specific code across several architectures. This is now needed as the warning is enabled by default. There are still some remaining warnings in minor platforms, but the series should catch most of the widely used ones make them more consistent with one another. David McKay fixes a bug in __generic_cmpxchg_local() when this is used on 64-bit architectures. This could currently only affect parisc64 and sparc64. Additional cleanups address from Linus Walleij, Uwe Kleine-König, Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies between architectures" * tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: Fix 32 bit __generic_cmpxchg_local Hexagon: Make pfn accessors statics inlines ARC: mm: Make virt_to_pfn() a static inline mips: remove extraneous asm-generic/iomap.h include sparc: Use $(kecho) to announce kernel images being ready arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes csky: fix arch_jump_label_transform_static override arch: add do_page_fault prototypes arch: add missing prepare_ftrace_return() prototypes arch: vdso: consolidate gettime prototypes arch: include linux/cpu.h for trap_init() prototype arch: fix asm-offsets.c building with -Wmissing-prototypes arch: consolidate arch_irq_work_raise prototypes hexagon: Remove CONFIG_HEXAGON_ARCH_VERSION from uapi header asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr() mips: io: remove duplicated codes arch/*/io.h: remove ioremap_uc in some architectures mips: add <asm-generic/io.h> including
2024-01-10kbuild: deb-pkg: use debian/<package> for tmpdirMasahiro Yamada1-29/+12
Use debian/<package> for tmpdir, which is the default of debhelper. This simplifies the code. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2024-01-10kbuild: deb-pkg: move 'make headers' to build-archMasahiro Yamada2-3/+2
Strictly speaking, 'make headers' should be a part of build-arch instead of binary-arch. 'make headers' constructs ready-to-copy UAPI headers in the kernel directory. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2024-01-09Merge tag 'mm-nonmm-stable-2024-01-09-10-33' of ↵Linus Torvalds9-56/+84
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "Quite a lot of kexec work this time around. Many singleton patches in many places. The notable patch series are: - nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio conversions for file paths'. - Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2: Folio conversions for directory paths'. - IA64 remnant removal in Heiko Carstens's 'Remove unused code after IA-64 removal'. - Arnd Bergmann has enabled the -Wmissing-prototypes warning everywhere in 'Treewide: enable -Wmissing-prototypes'. This had some followup fixes: - Nathan Chancellor has cleaned up the hexagon build in the series 'hexagon: Fix up instances of -Wmissing-prototypes'. - Nathan also addressed some s390 warnings in 's390: A couple of fixes for -Wmissing-prototypes'. - Arnd Bergmann addresses the same warnings for MIPS in his series 'mips: address -Wmissing-prototypes warnings'. - Baoquan He has made kexec_file operate in a top-down-fitting manner similar to kexec_load in the series 'kexec_file: Load kernel at top of system RAM if required' - Baoquan He has also added the self-explanatory 'kexec_file: print out debugging message if required'. - Some checkstack maintenance work from Tiezhu Yang in the series 'Modify some code about checkstack'. - Douglas Anderson has disentangled the watchdog code's logging when multiple reports are occurring simultaneously. The series is 'watchdog: Better handling of concurrent lockups'. - Yuntao Wang has contributed some maintenance work on the crash code in 'crash: Some cleanups and fixes'" * tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits) crash_core: fix and simplify the logic of crash_exclude_mem_range() x86/crash: use SZ_1M macro instead of hardcoded value x86/crash: remove the unused image parameter from prepare_elf_headers() kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE scripts/decode_stacktrace.sh: strip unexpected CR from lines watchdog: if panicking and we dumped everything, don't re-enable dumping watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting watchdog/hardlockup: adopt softlockup logic avoiding double-dumps kexec_core: fix the assignment to kimage->control_page x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init() lib/trace_readwrite.c:: replace asm-generic/io with linux/io nilfs2: cpfile: fix some kernel-doc warnings stacktrace: fix kernel-doc typo scripts/checkstack.pl: fix no space expression between sp and offset x86/kexec: fix incorrect argument passed to kexec_dprintk() x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs nilfs2: add missing set_freezable() for freezable kthread kernel: relay: remove relay_file_splice_read dead code, doesn't work docs: submit-checklist: remove all of "make namespacecheck" ...
2024-01-05kbuild: deb-pkg: do not search for 'scripts' directory under arch/Masahiro Yamada1-1/+1
The 'scripts' directory was searched under arch/${SRCARCH} to copy arch/ia64/scripts, but commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture") removed arch/ia64/ entirely. There is another 'scripts' directory in arch/um/, but this script is never executed with SRCARCH=um because UML does not support the linux-headers package. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-01-05kbuild: deb-pkg: use build ID instead of debug link for dbg packageMasahiro Yamada1-19/+13
There are two ways of managing separate debug info files: [1] The executable contains the .gnu_debuglink section, which specifies the name and the CRC of the separate debug info file. [2] The executable contains a build ID, and the corresponding debug info file is placed in the .build-id directory. We could do both, but the former, which 'make deb-pkg' currently does, results in complicated installation steps because we need to manually strip the debug sections, create debug links, and re-sign the modules. Besides, it is not working with module compression. This commit abandons the approach [1], and instead opts for [2]. Debian kernel commit de26137e2a9f ("Drop not needed extra step to add debug links") also stopped adding debug links. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-01-05kbuild: deb-pkg: use more debhelper commands in builddebMasahiro Yamada3-18/+14
Commit 36862e14e316 ("kbuild: deb-pkg: use dh_listpackages to know enabled packages") started to require the debhelper tool suite. Use more dh_* commands in create_package(): - dh_installdocs to install copyright - dh_installchangelogs to install changelog - dh_compress to compress changelog - dh_fixperms to replace the raw chmod command - dh_gencontrol to replace the raw dpkg-gencontrol command - dh_md5sums to record the md5sum of included files - dh_builddeb to replace the raw dpkg-deb command Set DEB_RULES_REQUIRES_ROOT to 'no' in case debian/rules is executed directly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2024-01-05kbuild: deb-pkg: remove unneeded '-f $srctree/Makefile' in debian/rulesMasahiro Yamada1-5/+3
This is unneeded because the Makefile in the output directory wraps the top-level Makefile in the srctree. Just run $(MAKE) irrespective of the build location. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2024-01-05kbuild: deb-pkg: allow to run debian/rules from output directoryMasahiro Yamada1-1/+1
'make O=... deb-pkg' creates the debian directory in the output directory. However, currently it is impossible to run debian/rules created in the separate output directory. This commit delays the $(srctree) expansion by escaping '$' and by quoting the entire command, making it possible to run debian/rules in the output directory. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2024-01-05kbuild: deb-pkg: set DEB_* variables if debian/rules is directly executedMasahiro Yamada2-4/+14
Since commit 491b146d4c13 ("kbuild: builddeb: Eliminate debian/arch use"), direct execution of debian/rules results in the following error: dpkg-architecture: error: unknown option 'DEB_HOST_MULTIARCH' The current code: dpkg-architecture -a$DEB_HOST_ARCH -qDEB_HOST_MULTIARCH ... does not look sensible because: - For this code to work correctly, DEB_HOST_ARCH must be pre-defined, which is true when the packages are built via dpkg-buildpackage. In this case, DEB_HOST_MULTIARCH is also likely defined, hence there is no need to query DEB_HOST_MULTIARCH in the first place. - If DEB_HOST_MULTIARCH is undefined, DEB_HOST_ARCH is likely undefined too. So, you cannot query DEB_HOST_MULTIARCH in this way. This is mostly the case where debian/rules is directly executed. When debian/rules is directly executed, querying DEB_HOST_MUCHARCH is not enough because we need to know DEB_{BUILD,HOST}_GNU_TYPE as well. All DEB_* variables are defined when the package build is initiated by dpkg-buildpackage, but otherwise, let's call dpkg-architecture to set all DEB_* environment variables. This requires dpkg 1.20.6 or newer because --print-format option was added in dpkg commit 7c54fa2b232e ("dpkg-architecture: Add a --print-format option"). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2024-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-24/+32
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()") 0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL") https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-04scripts/tags.sh: remove find_sourcesWei Yang1-7/+2
After commit '4f628248a578 kbuild: reintroduce ALLSOURCE_ARCHS support for tags/cscope', find_sources only invoke find_arch_sources. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> CC: Jike Song <albcamus@gmail.com> Link: https://lore.kernel.org/r/20231229030654.17474-4-richard.weiyang@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04scripts/tags.sh: use -n to test archincludeWei Yang1-1/+1
In bash, "! -z" is equivalent to "-n", which seems to be more intuitive. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> CC: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20231229030654.17474-3-richard.weiyang@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04scripts/tags.sh: add local annotationWei Yang1-2/+2
Commit 'f81b1be40c44 tags: include headers before source files' introduce two local variables. Let's add local annotation to make it obvious. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Link: https://lore.kernel.org/r/20231229030654.17474-2-richard.weiyang@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04scripts/tags.sh: use more portable -path instead of -wholenameWei Yang1-1/+1
According to the manual, -path is more portable than -wholename. Also for consistency, let's use -path here. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> CC: Guennadi Liakhovetski <g.liakhovetski@gmx.de> CC: WANG Cong <xiyou.wangcong@gmail.com> CC: Michal Marek <mmarek@suse.cz> Link: https://lore.kernel.org/r/20231229030654.17474-1-richard.weiyang@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04scripts/tags.sh: Update comment (addition of gtags)René Nyffenegger1-1/+1
Commit f4ed1009fcea ("kbuild: add GNU GLOBAL tags generation") added support for the GNU Global source tagging system. However, this addition was not reflected in the script's header comment. Fixes: f4ed1009fcea ("kbuild: add GNU GLOBAL tags generation") Signed-off-by: René Nyffenegger <mail@renenyffenegger.ch> Link: https://lore.kernel.org/r/20231217082719.4747-1-mail@renenyffenegger.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-03kernel-doc: handle a void function without producing a warningRandy Dunlap1-0/+1
Currently a void function can produce a warning: main.c:469: warning: contents before sections This one is from arch/x86/kernel/cpu/sgx/main.c (which is not included in any produced kernel documentation output). Handle this by setting $in_doc_sect to 1 whenever any recognized document section name is processed. Fixes: f624adef3d0b ("kernel-doc: limit the "section header:" detection to a select few") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20231226065219.319-1-rdunlap@infradead.org
2024-01-03scripts/get_abi.pl: ignore some temp filesRandy Dunlap1-0/+1
When there are filenames of the form ".orig" or ".rej" in the Documenatation/ABI/ subdirectories, there can be confusing or erroneous output generated. Example: the file Documenation/ABI/testing/sysfs-bus-papr-pmem.orig causes this warning message: Documentation/ABI/testing/sysfs-bus-papr-pmem:2: WARNING: unknown document: '/powerpc/papr_hcalls' Prevent this by skipping over filenames that may be created by patch/diff tools etc. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20231228233113.5218-1-rdunlap@infradead.org
2024-01-03scripts/get_abi: fix source path leakVegard Nossum1-1/+1
The code currently leaks the absolute path of the ABI files into the rendered documentation. There exists code to prevent this, but it is not effective when an absolute path is passed, which it is when $srctree is used. I consider this to be a minimal, stop-gap fix; a better fix would strip off the actual prefix instead of hacking it off with a regex. Link: https://mastodon.social/@vegard/111677490643495163 Cc: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20231231235959.3342928-1-vegard.nossum@oracle.com
2023-12-31get_maintainer: remove stray punctuation when cleaning file emailsAlvin Šipraga1-7/+11
When parsing emails from .yaml files in particular, stray punctuation such as a leading '-' can end up in the name. For example, consider a common YAML section such as: maintainers: - devicetree@vger.kernel.org This would previously be processed by get_maintainer.pl as: - <devicetree@vger.kernel.org> Make the logic in clean_file_emails more robust by deleting any sub-names which consist of common single punctuation marks before proceeding to the best-effort name extraction logic. The output is then correct: devicetree@vger.kernel.org Some additional comments are added to the function to make things clearer to future readers. Link: https://lore.kernel.org/all/0173e76a36b3a9b4e7f324dd3a36fd4a9757f302.camel@perches.com/ Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-12-31get_maintainer: correctly parse UTF-8 encoded names in filesAlvin Šipraga1-13/+17
While the script correctly extracts UTF-8 encoded names from the MAINTAINERS file, the regular expressions damage my name when parsing from .yaml files. Fix this by replacing the Latin-1-compatible regular expressions with the unicode property matcher \p{L}, which matches on any letter according to the Unicode General Category of letters. The proposed solution only works if the script uses proper string encoding from the outset, so instruct Perl to unconditionally open all files with UTF-8 encoding. This should be safe, as the entire source tree is either UTF-8 or ASCII encoded anyway. See [1] for a detailed analysis. Furthermore, to prevent the \w expression from matching non-ASCII when checking for whether a name should be escaped with quotes, add the /a flag to the regular expression. The escaping logic was duplicated in two places, so it has been factored out into its own function. The original issue was also identified on the tools mailing list [2]. This should solve the observed side effects there as well. Link: https://lore.kernel.org/all/dzn6uco4c45oaa3ia4u37uo5mlt33obecv7gghj2l756fr4hdh@mt3cprft3tmq/ [1] Link: https://lore.kernel.org/tools/20230726-gush-slouching-a5cd41@meerkat/ [2] Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-12-29scripts/decode_stacktrace.sh: strip unexpected CR from linesBjorn Andersson1-0/+3
When the kernel log is acquired over a serial cable it is not uncommon for the log to contain carriage return characters, in addition to the expected line feeds. When this output is feed into decode_stacktrace.sh, handle_line() fails to strip the trailing ']' off the module name, which results in find_module() not being able to find the referred to kernel module. This is reported to the user as: WARNING! Modules path isn't set, but is needed to parse this symbol The solution is to reconfigure the serial port, or to strip the carriage returns from the log, but this isn't obvious from the error reported by the script. Instead, make decode_stacktrace.sh more user friendly by stripping the trailing carriage return. Link: https://lkml.kernel.org/r/20231225-decode-stacktrace-cr-v1-1-9f306f38cdde@quicinc.com Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29scripts/checkstack.pl: fix no space expression between sp and offsetKuan-Ying Lee1-1/+1
When I use older version aarch64 objdump (2.24) to disassemble aarch64 vmlinux, I get the result like below. There is no space between sp and offset. ffff800008010000 <dw_apb_ictl_handle_irq>: ffff800008010000: d503233f hint #0x19 ffff800008010004: a9bc7bfd stp x29, x30, [sp,#-64]! ffff800008010008: 90011e60 adrp x0, ffff80000a3dc000 <num_ictlrs> ffff80000801000c: 910003fd mov x29, sp ffff800008010010: a9025bf5 stp x21, x22, [sp,#32] When I use newer version aarch64 objdump (2.35), I get the result like below. There is a space between sp and offset. ffff800008010000 <dw_apb_ictl_handle_irq>: ffff800008010000: d503233f paciasp ffff800008010004: a9bc7bfd stp x29, x30, [sp, #-64]! ffff800008010008: 90011e60 adrp x0, ffff80000a3dc000 <num_ictlrs> ffff80000801000c: 910003fd mov x29, sp ffff800008010010: a9025bf5 stp x21, x22, [sp, #32] Add no space support of regular expression for old version objdump. Link: https://lkml.kernel.org/r/20231220073629.2658-1-Kuan-Ying.Lee@mediatek.com Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Cc: Casper Li <casper.li@mediatek.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29scripts/checkstack.pl: change min_stack to 512 by defaultTiezhu Yang1-1/+1
According to Documentation/process/submit-checklist.rst, checkstack does not point out problems explicitly, but any one function that uses more than 512 bytes on the stack is a candidate for change, hence it is better to omit any stack frame sizes smaller than 512 bytes, just change min_stack to 512 by default. Link: https://lkml.kernel.org/r/20231219125008.23007-5-yangtiezhu@loongson.cn Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29scripts/checkstack.pl: match all stack sizes for some archsTiezhu Yang1-6/+6
For some unknown reason the regular expression for checkstack only matches three digit numbers starting with the number "3", or any higher number. Which means that it skips any stack sizes smaller than 304 bytes. This makes the checkstack script a bit less useful than it could be. Change the script to match any number. To be filtered out stack sizes can be configured with the min_stack variable, which omits any stack frame sizes smaller than 100 bytes by default. This is similar with commit aab1f809d754 ("scripts/checkstack.pl: match all stack sizes for s390"). Link: https://lkml.kernel.org/r/20231219125008.23007-4-yangtiezhu@loongson.cn Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29scripts/checkstack.pl: add min_stack to the usage commentTiezhu Yang1-1/+1
After commit 572220aad525 ("scripts/checkstack.pl: Add argument to print stacks greather than value."), it is appropriate to add min_stack to the usage comment, then the users know explicitly that "min_stack" can be specified like "arch". Link: https://lkml.kernel.org/r/20231219125008.23007-3-yangtiezhu@loongson.cn Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29scripts/checkstack.pl: remove ia64 supportTiezhu Yang1-4/+0
Patch series "Modify some code about checkstack". This patch (of 5): After commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture"), the ia64 port has been removed from the kernel, so also remove the ia64 specific bits from the checkstack.pl script. Link: https://lkml.kernel.org/r/20231219125008.23007-1-yangtiezhu@loongson.cn Link: https://lkml.kernel.org/r/20231219125008.23007-2-yangtiezhu@loongson.cn Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29checkstack: add loongarch support for scripts/checkstack.plYouling Tang1-0/+4
scripts/checkstack.pl lacks support for the loongarch architecture. Add support to detect "addi.{w,d} $sp, $sp, -FRAME_SIZE" stack frame generation instruction. Link: https://lkml.kernel.org/r/MW4PR84MB314514273F0B7DBCC5E35A978192A@MW4PR84MB3145.NAMPRD84.PROD.OUTLOOK.COM Signed-off-by: Youling Tang <tangyouling@kylinos.cn> Acked-by: Huacai Chen <chenhuacai@loongson.cn> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29scripts/decodecode: add support for LoongArchYouling Tang1-0/+5
An example how to invoke decodecode for loongarch64: $ echo 'Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91' | \ ARCH=loongarch CROSS_COMPILE=loongarch64-linux-gnu- \ ./scripts/decodecode Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91 All code ======== 0: 380839f6 ldx.w $fp, $t3, $t2 4: 380831f9 ldx.w $s2, $t3, $t0 8: 28412bae ld.h $t2, $s6, 74(0x4a) c:* 24000ca6 ldptr.w $a2, $a1, 12(0xc) <-- trapping instruction 10: 004081ad slli.w $t1, $t1, 0x0 14: 0014cb50 and $t4, $s3, $t6 18: 004083e8 slli.w $a4, $s8, 0x0 1c: 02bff34c addi.w $t0, $s3, -4(0xffc) 20: 58008e91 beq $t8, $t5, 140(0x8c) # 0xac Code starting with the faulting instruction =========================================== 0: 24000ca6 ldptr.w $a2, $a1, 12(0xc) 4: 004081ad slli.w $t1, $t1, 0x0 8: 0014cb50 and $t4, $s3, $t6 c: 004083e8 slli.w $a4, $s8, 0x0 10: 02bff34c addi.w $t0, $s3, -4(0xffc) 14: 58008e91 beq $t8, $t5, 140(0x8c) # 0xa0 Link: https://lkml.kernel.org/r/MW4PR84MB3145B99B9677BB7887BB26CD8192A@MW4PR84MB3145.NAMPRD84.PROD.OUTLOOK.COM Signed-off-by: Youling Tang <tangyouling@kylinos.cn> Acked-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29kbuild: deb-pkg: squash scripts/package/deb-build-option to debian/rulesMasahiro Yamada2-16/+3
The binary-arch target needs to use the same CROSS_COMPILE as used in build-arch; otherwise, 'make run-command' may attempt to resync the .config file. Squash scripts/package/deb-build-option into debian/rules, as it is a small amount of code. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2023-12-29kbuild: deb-pkg: factor out common Make options in debian/rulesMasahiro Yamada1-4/+4
This avoids code duplication between binary-arch and built-arch. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2023-12-29kbuild: deb-pkg: hard-code Build-DependsMasahiro Yamada1-3/+2
The condition to require libelf-dev:native is stale because objtool is now enabled by CONFIG_OBJTOOL instead of CONFIG_UNWINDER_ORC. Not only objtool but also resolve_btfids requires libelf-dev:native; therefore, CONFIG_DEBUG_INFO_BTF should be checked as well. Similarly, CONFIG_SYSTEM_TRUSTED_KEYRING is not the only case that requires libssl-dev:native. Perhaps, the following code would provide better coverage, but it is hard to maintain (and may still be imperfect). if is_enabled CONFIG_OBJTOOL || is_enabled CONFIG_DEBUG_INFO_BTF; then build_depends="${build_depends}, libelf-dev:native" fi if is_enabled CONFIG_SYSTEM_TRUSTED_KEYRING || is_enabled CONFIG_SYSTEM_REVOCATION_LIST || is_enabled CONFIG_MODULE_SIG_FORMAT; then build_depends="${build_depends}, libssl-dev:native" fi Let's hard-code the build dependency. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2023-12-29kbuild: deb-pkg: split debian/copyright from the mkdebian scriptMasahiro Yamada2-20/+17
Copy debian/copyright instead of generating it by the 'cat' command. I also updated '2018' to '2023' while I was here. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2023-12-29check-uapi: Introduce check-uapi.shJohn Moon1-0/+573
While the kernel community has been good at maintaining backwards compatibility with kernel UAPIs, it would be helpful to have a tool to check if a commit introduces changes that break backwards compatibility. To that end, introduce check-uapi.sh: a simple shell script that checks for changes to UAPI headers using libabigail. libabigail is "a framework which aims at helping developers and software distributors to spot some ABI-related issues like interface incompatibility in ELF shared libraries by performing a static analysis of the ELF binaries at hand." The script uses one of libabigail's tools, "abidiff", to compile the changed header before and after the commit to detect any changes. abidiff "compares the ABI of two shared libraries in ELF format. It emits a meaningful report describing the differences between the two ABIs." The script also includes the ability to check the compatibility of all UAPI headers across commits. This allows developers to inspect the stability of the UAPIs over time. Signed-off-by: John Moon <quic_johmoo@quicinc.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-12-29scripts: Introduce a default git.orderFileLeonardo Bras1-0/+42
When reviewing patches, it looks much nicer to have some changes shown before others, which allow better understanding of the patch before the the .c files reviewing. Introduce a default git.orderFile, in order to help developers getting the best ordering easier. Signed-off-by: Leonardo Bras <leobras@redhat.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-12-29kconfig: WERROR unmet symbol dependencySergey Senozhatsky4-5/+25
When KCONFIG_WERROR env variable is set treat unmet direct symbol dependency as a terminal condition (error). Suggested-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 12:44:09 +0000