summaryrefslogtreecommitdiff
path: root/kernel/power/power.h
AgeCommit message (Collapse)AuthorFilesLines
2020-12-15kernel/power: allow hibernation with page_poison sanity checkingVlastimil Babka1-1/+1
Page poisoning used to be incompatible with hibernation, as the state of poisoned pages was lost after resume, thus enabling CONFIG_HIBERNATION forces CONFIG_PAGE_POISONING_NO_SANITY. For the same reason, the poisoning with zeroes variant CONFIG_PAGE_POISONING_ZERO used to disable hibernation. The latter restriction was removed by commit 1ad1410f632d ("PM / Hibernate: allow hibernation with PAGE_POISONING_ZERO") and similarly for init_on_free by commit 18451f9f9e58 ("PM: hibernate: fix crashes with init_on_free=1") by making sure free pages are cleared after resume. We can use the same mechanism to instead poison free pages with PAGE_POISON after resume. This covers both zero and 0xAA patterns. Thus we can remove the Kconfig restriction that disables page poison sanity checking when hibernation is enabled. Link: https://lkml.kernel.org/r/20201113104033.22907-4-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [hibernation] Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Mateusz Nosek <mateusznosek0@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-01notifier: Fix broken error handling patternPeter Zijlstra1-2/+1
The current notifiers have the following error handling pattern all over the place: int err, nr; err = __foo_notifier_call_chain(&chain, val_up, v, -1, &nr); if (err & NOTIFIER_STOP_MASK) __foo_notifier_call_chain(&chain, val_down, v, nr-1, NULL) And aside from the endless repetition thereof, it is broken. Consider blocking notifiers; both calls take and drop the rwsem, this means that the notifier list can change in between the two calls, making @nr meaningless. Fix this by replacing all the __foo_notifier_call_chain() functions with foo_notifier_call_chain_robust() that embeds the above pattern, but ensures it is inside a single lock region. Note: I switched atomic_notifier_call_chain_robust() to use the spinlock, since RCU cannot provide the guarantee required for the recovery. Note: software_resume() error handling was broken afaict. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20200818135804.325626653@infradead.org
2020-07-14PM: sleep: spread "const char *" correctnessAlexey Dobriyan1-1/+1
Fixed string literals can be referred to as "const char *". Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> [ rjw: Minor subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-19PM: hibernate: Incorporate concurrency handlingDomenico Andreoli1-2/+2
Hibernation concurrency handling is currently delegated to user.c, where it's also used for regulating the access to the snapshot device. In the prospective of making user.c a separate configuration option, such mutual exclusion is brought into hibernate.c and made available through accessor helpers hereby introduced. Signed-off-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-15y2038: syscalls: change remaining timeval to __kernel_old_timevalArnd Bergmann1-1/+1
All of the remaining syscalls that pass a timeval (gettimeofday, utime, futimesat) can trivially be changed to pass a __kernel_old_timeval instead, which has a compatible layout, but avoids ambiguity with the timeval type in user space. Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-06-14PM: hibernate: powerpc: Expose pfn_is_nosave() prototypeMathieu Malaterre1-2/+0
The declaration for pfn_is_nosave is only available in kernel/power/power.h. Since this function can be override in arch, expose it globally. Having a prototype will make sure to avoid warning (sometime treated as error with W=1) such as: arch/powerpc/kernel/suspend.c:18:5: error: no previous prototype for 'pfn_is_nosave' [-Werror=missing-prototypes] This moves the declaration into a globally visible header file and add missing include to avoid a warning on powerpc. Also remove the duplicated prototypes since not required anymore. Signed-off-by: Mathieu Malaterre <malat@debian.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-02x86/power: Fix swsusp_arch_resume prototypeArnd Bergmann1-3/+0
The declaration for swsusp_arch_resume marks it as 'asmlinkage', but the definition in x86-32 does not, and it fails to include the header with the declaration. This leads to a warning when building with link-time-optimizations: kernel/power/power.h:108:23: error: type of 'swsusp_arch_resume' does not match original declaration [-Werror=lto-type-mismatch] extern asmlinkage int swsusp_arch_resume(void); ^ arch/x86/power/hibernate_32.c:148:0: note: 'swsusp_arch_resume' was previously declared here int swsusp_arch_resume(void) This moves the declaration into a globally visible header file and fixes up both x86 definitions to match it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Len Brown <len.brown@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Nicolas Pitre <nico@linaro.org> Cc: linux-pm@vger.kernel.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Bart Van Assche <bart.vanassche@wdc.com> Link: https://lkml.kernel.org/r/20180202145634.200291-2-arnd@arndb.de
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-05ACPI / PM: Prefer suspend-to-idle over S3 on some systemsRafael J. Wysocki1-1/+0
Modify the ACPI system sleep support setup code to select suspend-to-idle as the default system sleep state if (1) the ACPI_FADT_LOW_POWER_S0 flag is set in the FADT and (2) the Low Power Idle S0 _DSM interface has been discovered and (3) the default sleep state was not selected from the kernel command line. The main motivation for this change is that systems where the (1) and (2) conditions are met typically ship with OSes that don't exercise the S3 path in the platform firmware which remains untested and turns out to be non-functional at least in some cases. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2017-07-24PM / sleep: Put pm_test under CONFIG_PM_SLEEP_DEBUGRafael J. Wysocki1-1/+1
The pm_test sysfs attribute is under CONFIG_PM_DEBUG, but it doesn't make sense to provide it if CONFIG_PM_SLEEP is unset, so put it under CONFIG_PM_SLEEP_DEBUG instead. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-24PM / s2idle: Rearrange the main suspend-to-idle loopRafael J. Wysocki1-0/+4
As a preparation for subsequent changes, rearrange the core suspend-to-idle code by moving the initial invocation of dpm_suspend_noirq() into s2idle_loop(). This also causes debug messages from that code to appear in a less confusing order. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONXLaura Abbott1-2/+2
Both of these options are poorly named. The features they provide are necessary for system security and should not be considered debug only. Change the names to CONFIG_STRICT_KERNEL_RWX and CONFIG_STRICT_MODULE_RWX to better describe what these options do. Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Jessica Yu <jeyu@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-11-21PM / sleep: System sleep state selection interface reworkRafael J. Wysocki1-1/+5
There are systems in which the platform doesn't support any special sleep states, so suspend-to-idle (PM_SUSPEND_FREEZE) is the only available system sleep state. However, some user space frameworks only use the "mem" and (sometimes) "standby" sleep state labels, so the users of those systems need to modify user space in order to be able to use system suspend at all and that may be a pain in practice. Commit 0399d4db3edf (PM / sleep: Introduce command line argument for sleep state enumeration) attempted to address this problem by adding a command line argument to change the meaning of the "mem" string in /sys/power/state to make it trigger suspend-to-idle (instead of suspend-to-RAM). However, there also are systems in which the platform does support special sleep states, but suspend-to-idle is the preferred one anyway (it even may save more energy than the platform-provided sleep states in some cases) and the above commit doesn't help in those cases. For this reason, rework the system sleep state selection interface again (but preserve backwards compatibiliby). Namely, add a new sysfs file, /sys/power/mem_sleep, that will control the system suspend mode triggered by writing "mem" to /sys/power/state (in analogy with what /sys/power/disk does for hibernation). Make it select suspend-to-RAM ("deep" sleep) by default (if supported) and fall back to suspend-to-idle ("s2idle") otherwise and add a new command line argument, mem_sleep_default, allowing that default to be overridden if need be. At the same time, drop the relative_sleep_states command line argument that doesn't make sense any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2016-09-13PM / Hibernate: allow hibernation with PAGE_POISONING_ZEROAnisse Astier1-0/+2
PAGE_POISONING_ZERO disables zeroing new pages on alloc, they are poisoned (zeroed) as they become available. In the hibernate use case, free pages will appear in the system without being cleared, left there by the loading kernel. This patch will make sure free pages are cleared on resume when PAGE_POISONING_ZERO is enabled. We free the pages just after resume because we can't do it later: going through any device resume code might allocate some memory and invalidate the free pages bitmap. Thus we don't need to disable hibernation when PAGE_POISONING_ZERO is enabled. Signed-off-by: Anisse Astier <anisse@astier.eu> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-15x86 / hibernate: Use hlt_play_dead() when resuming from hibernationRafael J. Wysocki1-0/+2
On Intel hardware, native_play_dead() uses mwait_play_dead() by default and only falls back to the other methods if that fails. That also happens during resume from hibernation, when the restore (boot) kernel runs disable_nonboot_cpus() to take all of the CPUs except for the boot one offline. However, that is problematic, because the address passed to __monitor() in mwait_play_dead() is likely to be written to in the last phase of hibernate image restoration and that causes the "dead" CPU to start executing instructions again. Unfortunately, the page containing the address in that CPU's instruction pointer may not be valid any more at that point. First, that page may have been overwritten with image kernel memory contents already, so the instructions the CPU attempts to execute may simply be invalid. Second, the page tables previously used by that CPU may have been overwritten by image kernel memory contents, so the address in its instruction pointer is impossible to resolve then. A report from Varun Koyyalagunta and investigation carried out by Chen Yu show that the latter sometimes happens in practice. To prevent it from happening, temporarily change the smp_ops.play_dead pointer during resume from hibernation so that it points to a special "play dead" routine which uses hlt_play_dead() and avoids the inadvertent "revivals" of "dead" CPUs this way. A slightly unpleasant consequence of this change is that if the system is hibernated with one or more CPUs offline, it will generally draw more power after resume than it did before hibernation, because the physical state entered by CPUs via hlt_play_dead() is higher-power than the mwait_play_dead() one in the majority of cases. It is possible to work around this, but it is unclear how much of a problem that's going to be in practice, so the workaround will be implemented later if it turns out to be necessary. Link: https://bugzilla.kernel.org/show_bug.cgi?id=106371 Reported-by: Varun Koyyalagunta <cpudebug@centtech.com> Original-by: Chen Yu <yu.c.chen@intel.com> Tested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2016-07-10PM / hibernate: Image data protection during restorationRafael J. Wysocki1-0/+7
Make it possible to protect all pages holding image data during hibernate image restoration by setting them read-only (so as to catch attempts to write to those pages after image data have been stored in them). This adds overhead to image restoration code (it may cause large page mappings to be split as a result of page flags changes) and the errors it protects against should never happen in theory, so the feature is only active after passing hibernate=protect_image to the command line of the restore kernel. Also it only is built if CONFIG_DEBUG_RODATA is set. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-28PM / sleep: make PM notifiers called symmetricallyLianwei Wang1-0/+2
This makes pm notifier PREPARE/POST symmetrical: if PREPARE fails, we will only undo what ever happened on PREPARE. It fixes the unbalanced CPU hotplug enable in CPU PM notifier. Signed-off-by: Lianwei Wang <lianwei.wang@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-04PM / sleep: Add support for read-only sysfs attributesRafael J. Wysocki1-0/+9
Some sysfs attributes in /sys/power/ should really be read-only, so add support for that, convert those attributes to read-only and drop the stub .show() routines from them. Original-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-19suspend: simplify block I/O handlingChristoph Hellwig1-9/+0
Stop abusing struct page functionality and the swap end_io handler, and instead add a modified version of the blk-lib.c bio_batch helpers. Also move the block I/O code into swap.c as they are directly tied into each other. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Pavel Machek <pavel@ucw.cz> Tested-by: Ming Lin <mlin@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-11-03PM / Hibernate: Migrate to ktime_tTina Ruchandani1-2/+1
This patch migrates swsusp_show_speed and its callers to using ktime_t instead of 'struct timeval' which suffers from the y2038 problem. Changes to swsusp_show_speed: - use ktime_t for start and stop times - pass start and stop times by value Calling functions affected: - load_image - load_image_lzo - save_image - save_image_lzo - hibernate_preallocate_memory Design decisions: - use ktime_t to preserve same granularity of reporting as before - use centisecs logic as before to avoid 'div by zero' issues caused by using seconds and nanoseconds directly - use monotonic time (ktime_get()) since we only care about elapsed time. Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03PM / sleep: Fix test_suspend= command line optionRafael J. Wysocki1-0/+1
After commit d431cbc53cb7 (PM / sleep: Simplify sleep states sysfs interface code) the pm_states[] array is not populated initially, which causes setup_test_suspend() to always fail and the suspend testing during boot doesn't work any more. Fix the problem by using pm_labels[] instead of pm_states[] in setup_test_suspend() and storing a pointer to the label of the sleep state to test rather than the number representing it, because the connection between the state numbers and labels is only established by suspend_set_ops(). Fixes: d431cbc53cb7 (PM / sleep: Simplify sleep states sysfs interface code) Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-21PM / sleep: Simplify sleep states sysfs interface codeRafael J. Wysocki1-6/+1
Simplify the sleep states sysfs interface /sys/power/state code by redefining pm_states[] as an array of pointers to constant strings such that only the entries corresponding to valid states are set. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-26PM / sleep: Use valid_state() for platform-dependent sleep states onlyRafael J. Wysocki1-2/+0
Use the observation that, for platform-dependent sleep states (PM_SUSPEND_STANDBY, PM_SUSPEND_MEM), a given state is either always supported or always unsupported and store that information in pm_states[] instead of calling valid_state() every time we need to check it. Also do not use valid_state() for PM_SUSPEND_FREEZE, which is always valid, and move the pm_test_level validity check for PM_SUSPEND_FREEZE directly into enter_state(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-26PM / sleep: Add state field to pm_states[] entriesRafael J. Wysocki1-1/+6
To allow sleep states corresponding to the "mem", "standby" and "freeze" lables to be different from the pm_states[] indexes of those strings, introduce struct pm_sleep_state, consisting of a string label and a state number, and turn pm_states[] into an array of objects of that type. This modification should not lead to any functional changes. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-07kernel: use macros from compiler.h instead of __attribute__((...))Gideon Israel Dsouza1-1/+2
To increase compiler portability there is <linux/compiler.h> which provides convenience macros for various gcc constructs. Eg: __weak for __attribute__((weak)). I've replaced all instances of gcc attributes with the right macro in the kernel subsystem. Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-01PM / sleep: Move prototype declaration to header file kernel/power/power.hRashika Kheria1-0/+2
Move prototype declaration of function to header file kernel/power/power.h because it is used by more than one file. This eliminates the following warning in kernel/power/snapshot.c: kernel/power/snapshot.c:1588:16: warning: no previous prototype for ‘swsusp_save’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-07-01PM / Hibernate: Enable suspend to both for in-kernel hibernation.Bojan Smojver1-0/+3
It is often useful to suspend to memory after hibernation image has been written to disk. If the battery runs out or power is otherwise lost, the computer will resume from the hibernated image. If not, it will resume from memory and hibernation image will be discarded. Signed-off-by: Bojan Smojver <bojan@rexursive.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-01PM / Sleep: Add user space interface for manipulating wakeup sources, v3Rafael J. Wysocki1-0/+9
Android allows user space to manipulate wakelocks using two sysfs file located in /sys/power/, wake_lock and wake_unlock. Writing a wakelock name and optionally a timeout to the wake_lock file causes the wakelock whose name was written to be acquired (it is created before is necessary), optionally with the given timeout. Writing the name of a wakelock to wake_unlock causes that wakelock to be released. Implement an analogous interface for user space using wakeup sources. Add the /sys/power/wake_lock and /sys/power/wake_unlock files allowing user space to create, activate and deactivate wakeup sources, such that writing a name and optionally a timeout to wake_lock causes the wakeup source of that name to be activated, optionally with the given timeout. If that wakeup source doesn't exist, it will be created and then activated. Writing a name to wake_unlock causes the wakeup source of that name, if there is one, to be deactivated. Wakeup sources created with the help of wake_lock that haven't been used for more than 5 minutes are garbage collected and destroyed. Moreover, there can be only WL_NUMBER_LIMIT wakeup sources created with the help of wake_lock present at a time. The data type used to track wakeup sources created by user space is called "struct wakelock" to indicate the origins of this feature. This version of the patch includes an rbtree manipulation fix from John Stultz. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NeilBrown <neilb@suse.de>
2012-05-01PM / Sleep: Implement opportunistic sleep, v2Rafael J. Wysocki1-0/+18
Introduce a mechanism by which the kernel can trigger global transitions to a sleep state chosen by user space if there are no active wakeup sources. It consists of a new sysfs attribute, /sys/power/autosleep, that can be written one of the strings returned by reads from /sys/power/state, an ordered workqueue and a work item carrying out the "suspend" operations. If a string representing the system's sleep state is written to /sys/power/autosleep, the work item triggering transitions to that state is queued up and it requeues itself after every execution until user space writes "off" to /sys/power/autosleep. That work item enables the detection of wakeup events using the functions already defined in drivers/base/power/wakeup.c (with one small modification) and calls either pm_suspend(), or hibernate() to put the system into a sleep state. If a wakeup event is reported while the transition is in progress, it will abort the transition and the "system suspend" work item will be queued up again. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NeilBrown <neilb@suse.de>
2012-02-17PM / Sleep: Make enter_state() in kernel/power/suspend.c staticRafael J. Wysocki1-2/+0
The enter_state() function in kernel/power/suspend.c should be static and state_store() in kernel/power/suspend.c should call pm_suspend() instead of it, so make that happen (which also reduces code duplication related to suspend statistics). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
2012-02-13PM / Sleep: Remove unnecessary label from suspend_freeze_processes()Rafael J. Wysocki1-4/+1
The Finish label in suspend_freeze_processes() is in fact unnecessary and makes the function look more complicated than it really is, so remove that label (along with a few empty lines). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
2012-02-04PM / Freezer: Thaw only kernel threads if freezing of kernel threads failsSrivatsa S. Bhat1-2/+22
If freezing of kernel threads fails, we are expected to automatically thaw tasks in the error recovery path. However, at times, we encounter situations in which we would like the automatic error recovery path to thaw only the kernel threads, because we want to be able to do some more cleanup before we thaw userspace. Something like: error = freeze_kernel_threads(); if (error) { /* Do some cleanup */ /* Only then thaw userspace tasks*/ thaw_processes(); } An example of such a situation is where we freeze/thaw filesystems during suspend/hibernation. There, if freezing of kernel threads fails, we would like to thaw the frozen filesystems before thawing the userspace tasks. So, modify freeze_kernel_threads() to thaw only kernel threads in case of freezing failure. And change suspend_freeze_processes() accordingly. (At the same time, let us also get rid of the rather cryptic usage of the conditional operator (:?) in that function.) [rjw: In fact, this patch fixes a regression introduced during the 3.3 merge window, because without it thaw_processes() may be called before swsusp_free() in some situations and that may lead to massive memory allocation failures.] Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Nigel Cunningham <nigel@tuxonice.net> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-06PM / Hibernate: Thaw processes in SNAPSHOT_CREATE_IMAGE ioctl test pathSrivatsa S. Bhat1-0/+2
Commit 2aede851ddf08666f68ffc17be446420e9d2a056 (PM / Hibernate: Freeze kernel threads after preallocating memory) moved the freezing of kernel threads to hibernation_snapshot() function. So now, if the call to hibernation_snapshot() returns early due to a successful hibernation test, the caller has to thaw processes to ensure that the system gets back to its original state. But in SNAPSHOT_CREATE_IMAGE hibernation ioctl, the caller does not thaw processes in case hibernation_snapshot() returned due to a successful freezer test. Fix this issue. But note we still send the value of 'in_suspend' (which is now 0) to userspace, because we are not in an error path per-se, and moreover, the value of in_suspend correctly depicts the situation here. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16PM / Hibernate: Improve performance of LZO/plain hibernation, checksum imageBojan Smojver1-0/+1
Use threads for LZO compression/decompression on hibernate/thaw. Improve buffering on hibernate/thaw. Calculate/verify CRC32 of the image pages on hibernate/thaw. In my testing, this improved write/read speed by a factor of about two. Signed-off-by: Bojan Smojver <bojan@rexursive.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16PM / Hibernate: Freeze kernel threads after preallocating memoryRafael J. Wysocki1-1/+2
There is a problem with the current ordering of hibernate code which leads to deadlocks in some filesystems' memory shrinkers. Namely, some filesystems use freezable kernel threads that are inactive when the hibernate memory preallocation is carried out. Those same filesystems use memory shrinkers that may be triggered by the hibernate memory preallocation. If those memory shrinkers wait for the frozen kernel threads, the hibernate process deadlocks (this happens with XFS, for one example). Apparently, it is not technically viable to redesign the filesystems in question to avoid the situation described above, so the only possible solution of this issue is to defer the freezing of kernel threads until the hibernate memory preallocation is done, which is implemented by this change. Unfortunately, this requires the memory preallocation to be done before the "prepare" stage of device freeze, so after this change the only way drivers can allocate additional memory for their freeze routines in a clean way is to use PM notifiers. Reported-by: Christoph <cr2005@u-club.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-05-17PM / Hibernate: Add sysfs knob to control size of memory for driversRafael J. Wysocki1-0/+4
Martin reports that on his system hibernation occasionally fails due to the lack of memory, because the radeon driver apparently allocates too much of it during the device freeze stage. It turns out that the amount of memory allocated by radeon during hibernation (and presumably during system suspend too) depends on the utilization of the GPU (e.g. hibernating while there are two KDE 4 sessions with compositing enabled causes radeon to allocate more memory than for one KDE 4 session). In principle it should be possible to use image_size to make the memory preallocation mechanism free enough memory for the radeon driver, but in practice it is not easy to guess the right value because of the way the preallocation code uses image_size. For this reason, it seems reasonable to allow users to control the amount of memory reserved for driver allocations made after the hibernate preallocation, which currently is constant and amounts to 1 MB. Introduce a new sysfs file, /sys/power/reserved_size, whose value will be used as the amount of memory to reserve for the post-preallocation reservations made by device drivers, in bytes. For backwards compatibility, set its default (and initial) value to the currently used number (1 MB). References: https://bugzilla.kernel.org/show_bug.cgi?id=34102 Reported-and-tested-by: Martin Steigerwald <Martin@Lichtvoll.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17PM / Hibernate: Make default image size depend on total RAM sizeRafael J. Wysocki1-1/+8
The default hibernation image size is currently hard coded and euqal to 500 MB, which is not a reasonable default on many contemporary systems. Make it equal 2/5 of the total RAM size (this is slightly below the maximum, i.e. 1/2 of the total RAM size, and seems to be generally suitable). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: M. Vefa Bicakci <bicave@superonline.com>
2010-10-17PM / Hibernate: Compress hibernation image with LZOBojan Smojver1-0/+1
Compress hibernation image with LZO in order to save on I/O and therefore time to hibernate/thaw. [rjw: Added hibernate=nocompress command line option instead of just nocompress which would be confusing, fixed a couple of compiler warnings, fixed kerneldoc comments, minor cleanups.] Signed-off-by: Bojan Smojver <bojan@rexursive.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10PM / Hibernate: Separate block_ioJiri Slaby1-0/+9
Move block I/O operations to a separate file. It is because it will be used later not only by the swap writer. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10PM / Hibernate: Snapshot cleanupJiri Slaby1-15/+3
Remove support of reads with offset. This means snapshot_read/write_next now does not accept count parameter. It allows to clean up the functions and snapshot handle which no longer needs to care about offsets. /dev/snapshot handler is converted to simple_{read_from,write_to}_buffer which take care of offsets. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-09-14PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)Rafael J. Wysocki1-1/+1
Since the hibernation code is now going to use allocations of memory to make enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing. [rev. 2: Take highmem into account correctly.] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-12PM/Hibernate: Rename disk.c to hibernate.cRafael J. Wysocki1-2/+2
Change the name of kernel/power/disk.c to kernel/power/hibernate.c in analogy with the file names introduced by the changes that separated the suspend to RAM and standby funtionality from the common PM functions. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz>
2009-06-12PM: Separate suspend to RAM functionality from coreRafael J. Wysocki1-1/+16
Move the suspend to RAM and standby code from kernel/power/main.c to two separate files, kernel/power/suspend.c containing the basic functions and kernel/power/suspend_test.c containing the automatic suspend test facility based on the RTC clock alarm. There are no changes in functionality related to these modifications. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz>
2009-06-12PM/Hibernate: Move memory shrinking to snapshot.c (rev. 2)Rafael J. Wysocki1-3/+1
A future patch is going to modify the memory shrinking code so that it will make memory allocations to free memory instead of using an artificial memory shrinking mechanism for that. For this purpose it is convenient to move swsusp_shrink_memory() from kernel/power/swsusp.c to kernel/power/snapshot.c, because the new memory-shrinking code is going to use things that are local to kernel/power/snapshot.c . [rev. 2: Make some functions static and remove their headers from kernel/power/power.h] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Wu Fengguang <fengguang.wu@intel.com>
2008-10-21[PATCH] propagate mode through swsusp_close()Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26kexec jump: save/restore device stateHuang Ying1-2/+0
This patch implements devices state save/restore before after kexec. This patch together with features in kexec_jump patch can be used for following: - A simple hibernation implementation without ACPI support. You can kexec a hibernating kernel, save the memory image of original system and shutdown the system. When resuming, you restore the memory image of original system via ordinary kexec load then jump back. - Kernel/system debug through making system snapshot. You can make system snapshot, jump back, do some thing and make another system snapshot. - Cooperative multi-kernel/system. With kexec jump, you can switch between several kernels/systems quickly without boot process except the first time. This appears like swap a whole kernel/system out/in. - A general method to call program in physical mode (paging turning off). This can be used to invoke BIOS code under Linux. The following user-space tools can be used with kexec jump: - kexec-tools needs to be patched to support kexec jump. The patches and the precompiled kexec can be download from the following URL: source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2 patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2 binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10 - makedumpfile with patches are used as memory image saving tool, it can exclude free pages from original kernel memory image file. The patches and the precompiled makedumpfile can be download from the following URL: source: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-src_cvs_kh10.tar.bz2 patches: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-patches_cvs_kh10.tar.bz2 binary: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile_cvs_kh10 - An initramfs image can be used as the root file system of kexeced kernel. An initramfs image built with "BuildRoot" can be downloaded from the following URL: initramfs image: http://khibernation.sourceforge.net/download/release_v10/initramfs/rootfs_cvs_kh10.gz All user space tools above are included in the initramfs image. Usage example of simple hibernation: 1. Compile and install patched kernel with following options selected: CONFIG_X86_32=y CONFIG_RELOCATABLE=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_PM=y CONFIG_HIBERNATION=y CONFIG_KEXEC_JUMP=y 2. Build an initramfs image contains kexec-tool and makedumpfile, or download the pre-built initramfs image, called rootfs.gz in following text. 3. Prepare a partition to save memory image of original kernel, called hibernating partition in following text. 4. Boot kernel compiled in step 1 (kernel A). 5. In the kernel A, load kernel compiled in step 1 (kernel B) with /sbin/kexec. The shell command line can be as follow: /sbin/kexec --load-preserve-context /boot/bzImage --mem-min=0x100000 --mem-max=0xffffff --initrd=rootfs.gz 6. Boot the kernel B with following shell command line: /sbin/kexec -e 7. The kernel B will boot as normal kexec. In kernel B the memory image of kernel A can be saved into hibernating partition as follow: jump_back_entry=`cat /proc/cmdline | tr ' ' '\n' | grep kexec_jump_back_entry | cut -d '='` echo $jump_back_entry > kexec_jump_back_entry cp /proc/vmcore dump.elf Then you can shutdown the machine as normal. 8. Boot kernel compiled in step 1 (kernel C). Use the rootfs.gz as root file system. 9. In kernel C, load the memory image of kernel A as follow: /sbin/kexec -l --args-none --entry=`cat kexec_jump_back_entry` dump.elf 10. Jump back to the kernel A as follow: /sbin/kexec -e Then, kernel A is resumed. Implementation point: To support jumping between two kernels, before jumping to (executing) the new kernel and jumping back to the original kernel, the devices are put into quiescent state, and the state of devices and CPU is saved. After jumping back from kexeced kernel and jumping to the new kernel, the state of devices and CPU are restored accordingly. The devices/CPU state save/restore code of software suspend is called to implement corresponding function. Known issues: - Because the segment number supported by sys_kexec_load is limited, hibernation image with many segments may not be load. This is planned to be eliminated by adding a new flag to sys_kexec_load to make a image can be loaded with multiple sys_kexec_load invoking. Now, only the i386 architecture is supported. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01Suspend: Add config option to disable the freezer if architecture wants thatJohannes Berg1-0/+22
This patch makes the freezer optional for suspend to allow the system to work (or not work) like the original PMU suspend. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01Hibernation: Move low level resume to disk.cRafael J. Wysocki1-1/+0
Move the low level restore code to kernel/power/disk.c , since the corresponding low level hibernation code is already there. Make restore fail if device_power_down(PMSG_PRETHAW) returns an error. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01PM: Convert PM notifiers to out-of-line codeAlan Stern1-8/+4
This patch (as1008b) converts the PM notifier routines from inline calls to out-of-line code. It also prevents pm_chain_head from being created when CONFIG_PM_SLEEP isn't enabled, and EXPORTs the notifier registration and unregistration routines. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01Hibernation: New testing facility (rev. 2)Rafael J. Wysocki1-0/+2
Make it possible to test the hibernation core code with the help of the /sys/power/pm_test attribute introduced for suspend testing in the previous patch. Writing an appropriate string to this file causes the hibernation code to work in one of the test modes defined as follows: freezer - test the freezing of processes devices - test the freezing of processes and suspending of devices platform - test the freezing of processes, suspending of devices and platform global   control methods(*) processors - test the freezing of processes, suspending of devices, platform global   control methods(*) and the disabling of nonboot CPUs core - test the freezing of processes, suspending of devices, platform global   control methods(*), the disabling of nonboot CPUs and suspending of   platform/system devices (*) - the platform global control methods are only available on ACPI systems       and are only tested if the hibernation mode is set to "platform" Then, if a hibernation is started by normal means, the hibernation core will perform its normal operations up to the point indicated by given test level. Next, it will wait for 5 seconds and carry out the resume operations needed to transition the system back to the fully functional state. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>