summaryrefslogtreecommitdiff
path: root/fs/jfs/file.c
AgeCommit message (Collapse)AuthorFilesLines
2010-08-09remove inode_setattrChristoph Hellwig1-3/+11
Replace inode_setattr with opencoded variants of it in all callers. This moves the remaining call to vmtruncate into the filesystem methods where it can be replaced with the proper truncate sequence. In a few cases it was obvious that we would never end up calling vmtruncate so it was left out in the opencoded variant: spufs: explicitly checks for ATTR_SIZE earlier btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above In addition to that ncpfs called inode_setattr with handcrafted iattrs, which allowed to trim down the opencoded variant. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27drop unused dentry argument to ->fsyncChristoph Hellwig1-2/+2
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21quota: unify quota init condition in setattrDmitry Monakhov1-1/+1
Quota must being initialized if size or uid/git changes requested. But initialization performed in two different places: in case of i_size file system is responsible for dquot init , but in case of uid/gid init will be called internally in dquot_transfer(). This ambiguity makes code harder to understand. Let's move this logic to one common helper function. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05dquot: cleanup dquot initialize routineChristoph Hellwig1-1/+1
Get rid of the initialize dquot operation - it is now always called from the filesystem and if a filesystem really needs it's own (which none currently does) it can just call into it's own routine directly. Rename the now static low-level dquot_initialize helper to __dquot_initialize and vfs_dq_init to dquot_initialize to have a consistent namespace. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05dquot: move dquot initialization responsibility into the filesystemChristoph Hellwig1-1/+3
Currently various places in the VFS call vfs_dq_init directly. This means we tie the quota code into the VFS. Get rid of that and make the filesystem responsible for the initialization. For most metadata operations this is a straight forward move into the methods, but for truncate and open it's a bit more complicated. For truncate we currently only call vfs_dq_init for the sys_truncate case because open already takes care of it for ftruncate and open(O_TRUNC) - the new code causes an additional vfs_dq_init for those which is harmless. For open the initialization is moved from do_filp_open into the open method, which means it happens slightly earlier now, and only for regular files. The latter is fine because we don't need to initialize it for operations on special files, and we already do it as part of the namespace operations for directories. Add a dquot_file_open helper that filesystems that support generic quotas can use to fill in ->open. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05dquot: cleanup dquot transfer routineChristoph Hellwig1-2/+3
Get rid of the transfer dquot operation - it is now always called from the filesystem and if a filesystem really needs it's own (which none currently does) it can just call into it's own routine directly. Rename the now static low-level dquot_transfer helper to __dquot_transfer and vfs_dq_transfer to dquot_transfer to have a consistent namespace, and make the new dquot_transfer return a normal negative errno value which all callers expect. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05dquot: move dquot transfer responsibility into the filesystemChristoph Hellwig1-1/+25
Currently notify_change calls vfs_dq_transfer directly. This means we tie the quota code into the VFS. Get rid of that and make the filesystem responsible for the transfer. Most filesystems already do this, only ufs and udf need the code added, and for jfs it needs to be enabled unconditionally instead of only when ACLs are enabled. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-08jffs2/jfs/xfs: switch over to 'check_acl' rather than 'permission()'Linus Torvalds1-1/+1
This avoids an indirect call in the VFS for each path component lookup. Well, at least as long as you own the directory in question, and the ACL check is unnecessary. Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07BKL-removal: Implement a compat_ioctl handler for JFSAndi Kleen1-0/+3
The ioctls were already compatible except for the actual values so this was fairly easy to do. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
2008-02-07BKL-removal: Use unlocked_ioctl for jfsAndi Kleen1-1/+1
Convert jfs_ioctl over to not use the BKL. The only potential race I could see was with two ioctls in parallel changing the flags and losing the updates. Use the i_mutex to protect against this. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
2007-07-10sendfile: remove .sendfile from filesystems that use generic_file_sendfile()Jens Axboe1-1/+0
They can use generic_file_splice_read() instead. Since sys_sendfile() now prefers that, there should be no change in behaviour. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-02-12[PATCH] mark struct inode_operations const 2Arjan van de Ven1-1/+1
Many struct inode_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-10-30jfs: Add splice supportDaniel Drake1-0/+2
This allows the splice() and tee() syscalls to be used with JFS. Signed-off-by: Daniel Drake <ddrake@brontes3d.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
2006-10-02JFS: White space cleanupDave Kleikamp1-4/+4
Removed trailing spaces & tabs, and spaces preceding tabs. Also a couple very minor comment cleanups. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> (cherry picked from f74156539964d7b3d5164fdf8848e6a682f75b97 commit)
2006-10-01[PATCH] Streamline generic_file_* interfaces and filemap cleanupsBadari Pulavarty1-2/+2
This patch cleans up generic_file_*_read/write() interfaces. Christoph Hellwig gave me the idea for this clean ups. In a nutshell, all filesystems should set .aio_read/.aio_write methods and use do_sync_read/ do_sync_write() as their .read/.write methods. This allows us to cleanup all variants of generic_file_* routines. Final available interfaces: generic_file_aio_read() - read handler generic_file_aio_write() - write handler generic_file_aio_write_nolock() - no lock write handler __generic_file_aio_write_nolock() - internal worker routine Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01[PATCH] Remove readv/writev methods and use aio_read/aio_write insteadBadari Pulavarty1-2/+0
This patch removes readv() and writev() methods and replaces them with aio_read()/aio_write() methods. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] Make most file operations structs in fs/ constArjan van de Ven1-1/+1
This is a conversion to make the various file_operations structs in fs/ const. Basically a regexp job, with a few manual fixups The goal is both to increase correctness (harder to accidentally write to shared datastructures) and reducing the false sharing of cachelines with things that get dirty in .data (while .rodata is nicely read only and thus cache clean) Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-09JFS: ext2 inode attributes for jfsHerbert Poetzl1-0/+1
ext2 inode attributes with relevance for jfs: 'a' EXT2_APPEND_FL -> append only 'i' EXT2_IMMUTABLE_FL -> immutable file 's' EXT2_SECRM_FL -> zero file 'u' EXT2_UNRM_FL -> allow for unrm 'A' EXT2_NOATIME_FL -> no access time 'D' EXT2_DIRSYNC_FL -> dirsync 'S' EXT2_SYNC_FL -> sync overview of jfs flags (partially for OS/2) value (OS/2) Linux ext2 attrs ------------------------------------------------ 0x00010000 IFJOURNAL - 0x00020000 ISPARSE used 0x00040000 INLINEEA used 0x00080000 - - JFS_NOATIME_FL 0x00100000 - - JFS_DIRSYNC_FL 0x00200000 - - JFS_SYNC_FL 0x00400000 - - JFS_SECRM_FL 0x00800000 ISWAPFILE - JFS_UNRM_FL 0x01000000 - - JFS_APPEND_FL 0x02000000 IREADONLY - JFS_IMMUTABLE_FL 0x04000000 IHIDDEN - - 0x08000000 ISYSTEM - - 0x10000000 - - 0x20000000 IDIRECTORY used 0x40000000 IARCHIVE - 0x80000000 INEWNAME - the implementation is straight forward, except for the fact that the attributes have to be mapped to match with the ext2 ones to avoid a separate tool for manipulating them (this could be avoided when using a separate flag field in the on-disk representation, but the overhead is minimal) a special jfs_ioctl is added to allow for the new JFS_IOC_GETFLAGS and JFS_IOC_SETFLAGS calls. a helper function jfs_set_inode_flags() to transfer the flags from the on-disk version to the inode minor changes to allow flag inheritance on inode creation, as well as a cleanup of the on-disk flags (including the new ones) beforementioned helper to map between ext2 and jfs versions of the new flags ... the JFS_SECRM_FL and JFS_UNRM_FL are not done yet and I'm not 100% sure they are worth the effort, the rest seems to work out of the box ... Signed-off-by: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
2005-05-04JFS: fix sparse warnings by moving extern declarations to headersDave Kleikamp1-6/+3
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds1-0/+119
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 09:31:23 +0000