diff options
Diffstat (limited to 'drivers/media/platform/Kconfig')
| -rw-r--r-- | drivers/media/platform/Kconfig | 191 |
1 files changed, 22 insertions, 169 deletions
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index e01bbb9dd1c1..c57ee78fa99d 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -5,7 +5,6 @@ menuconfig V4L_PLATFORM_DRIVERS bool "V4L platform devices" - depends on MEDIA_CAMERA_SUPPORT help Say Y here to enable support for platform-specific V4L drivers. @@ -15,7 +14,7 @@ source "drivers/media/platform/marvell-ccic/Kconfig" config VIDEO_VIA_CAMERA tristate "VIAFB camera controller support" - depends on FB_VIA + depends on FB_VIA && VIDEO_V4L2 select VIDEOBUF2_DMA_SG select VIDEO_OV7670 help @@ -43,7 +42,6 @@ config VIDEO_ASPEED config VIDEO_SH_VOU tristate "SuperH VOU video output driver" - depends on MEDIA_CAMERA_SUPPORT depends on VIDEO_DEV && I2C depends on ARCH_SHMOBILE || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG @@ -65,7 +63,9 @@ config VIDEO_VIU config VIDEO_MUX tristate "Video Multiplexer" select MULTIPLEXER - depends on VIDEO_V4L2 && OF && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER + depends on VIDEO_V4L2 && OF + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API select REGMAP select V4L2_FWNODE help @@ -73,10 +73,12 @@ config VIDEO_MUX config VIDEO_OMAP3 tristate "OMAP 3 Camera support" - depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API + depends on VIDEO_V4L2 && I2C depends on (ARCH_OMAP3 && OMAP_IOMMU) || COMPILE_TEST depends on COMMON_CLK && OF select ARM_DMA_USE_IOMMU if OMAP_IOMMU + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API select VIDEOBUF2_DMA_CONTIG select MFD_SYSCON select V4L2_FWNODE @@ -101,16 +103,19 @@ config VIDEO_PXA27x config VIDEO_QCOM_CAMSS tristate "Qualcomm V4L2 Camera Subsystem driver" - depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on VIDEO_V4L2 depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API select VIDEOBUF2_DMA_SG select V4L2_FWNODE config VIDEO_S3C_CAMIF tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver" - depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API - depends on PM + depends on VIDEO_V4L2 && I2C && PM depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API select VIDEOBUF2_DMA_CONTIG help This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera @@ -121,9 +126,10 @@ config VIDEO_S3C_CAMIF config VIDEO_STM32_DCMI tristate "STM32 Digital Camera Memory Interface (DCMI) support" - depends on VIDEO_V4L2 && OF && MEDIA_CONTROLLER + depends on VIDEO_V4L2 && OF depends on ARCH_STM32 || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG + select MEDIA_CONTROLLER select V4L2_FWNODE help This module makes the STM32 Digital Camera Memory Interface (DCMI) @@ -150,7 +156,9 @@ source "drivers/media/platform/sunxi/Kconfig" config VIDEO_TI_CAL tristate "TI CAL (Camera Adaptation Layer) driver" - depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on VIDEO_DEV && VIDEO_V4L2 + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API depends on SOC_DRA7XX || ARCH_K3 || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_FWNODE @@ -165,7 +173,6 @@ endif # V4L_PLATFORM_DRIVERS menuconfig V4L_MEM2MEM_DRIVERS bool "Memory-to-memory multimedia devices" depends on VIDEO_V4L2 - depends on MEDIA_CAMERA_SUPPORT help Say Y here to enable selecting drivers for V4L devices that use system memory for both source and destination buffers, as opposed @@ -180,6 +187,7 @@ config VIDEO_CODA select SRAM select VIDEOBUF2_DMA_CONTIG select VIDEOBUF2_VMALLOC + select V4L2_JPEG_HELPER select V4L2_MEM2MEM_DEV select GENERIC_ALLOCATOR help @@ -385,15 +393,6 @@ config VIDEO_STI_DELTA_DRIVER endif # VIDEO_STI_DELTA -config VIDEO_SH_VEU - tristate "SuperH VEU mem2mem video processing driver" - depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA - select VIDEOBUF2_DMA_CONTIG - select V4L2_MEM2MEM_DEV - help - Support for the Video Engine Unit (VEU) on SuperH and - SH-Mobile SoCs. - config VIDEO_RENESAS_FDP1 tristate "Renesas Fine Display Processor" depends on VIDEO_DEV && VIDEO_V4L2 @@ -435,9 +434,11 @@ config VIDEO_RENESAS_FCP config VIDEO_RENESAS_VSP1 tristate "Renesas VSP1 Video Processing Engine" - depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on VIDEO_V4L2 depends on ARCH_RENESAS || COMPILE_TEST depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API select VIDEOBUF2_DMA_CONTIG select VIDEOBUF2_VMALLOC help @@ -532,29 +533,6 @@ config VIDEO_TI_SC config VIDEO_TI_CSC tristate -menuconfig V4L_TEST_DRIVERS - bool "Media test drivers" - depends on MEDIA_CAMERA_SUPPORT - -if V4L_TEST_DRIVERS - -source "drivers/media/platform/vimc/Kconfig" - -source "drivers/media/platform/vivid/Kconfig" - -config VIDEO_VIM2M - tristate "Virtual Memory-to-Memory Driver" - depends on VIDEO_DEV && VIDEO_V4L2 - select VIDEOBUF2_VMALLOC - select V4L2_MEM2MEM_DEV - help - This is a virtual test device for the memory-to-memory driver - framework. - -source "drivers/media/platform/vicodec/Kconfig" - -endif #V4L_TEST_DRIVERS - menuconfig DVB_PLATFORM_DRIVERS bool "DVB platform devices" depends on MEDIA_DIGITAL_TV_SUPPORT @@ -565,131 +543,6 @@ if DVB_PLATFORM_DRIVERS source "drivers/media/platform/sti/c8sectpfe/Kconfig" endif #DVB_PLATFORM_DRIVERS -menuconfig CEC_PLATFORM_DRIVERS - bool "CEC platform devices" - depends on MEDIA_CEC_SUPPORT - -if CEC_PLATFORM_DRIVERS - -config VIDEO_CROS_EC_CEC - tristate "ChromeOS EC CEC driver" - depends on CROS_EC - select CEC_CORE - select CEC_NOTIFIER - select CROS_EC_PROTO - help - If you say yes here you will get support for the - ChromeOS Embedded Controller's CEC. - The CEC bus is present in the HDMI connector and enables communication - between compatible devices. - -config VIDEO_MESON_AO_CEC - tristate "Amlogic Meson AO CEC driver" - depends on ARCH_MESON || COMPILE_TEST - select CEC_CORE - select CEC_NOTIFIER - help - This is a driver for Amlogic Meson SoCs AO CEC interface. It uses the - generic CEC framework interface. - CEC bus is present in the HDMI connector and enables communication - -config VIDEO_MESON_G12A_AO_CEC - tristate "Amlogic Meson G12A AO CEC driver" - depends on ARCH_MESON || COMPILE_TEST - depends on COMMON_CLK && OF - select REGMAP - select REGMAP_MMIO - select CEC_CORE - select CEC_NOTIFIER - ---help--- - This is a driver for Amlogic Meson G12A SoCs AO CEC interface. - This driver if for the new AO-CEC module found in G12A SoCs, - usually named AO_CEC_B in documentation. - It uses the generic CEC framework interface. - CEC bus is present in the HDMI connector and enables communication - between compatible devices. - -config CEC_GPIO - tristate "Generic GPIO-based CEC driver" - depends on PREEMPTION || COMPILE_TEST - select CEC_CORE - select CEC_PIN - select CEC_NOTIFIER - select GPIOLIB - help - This is a generic GPIO-based CEC driver. - The CEC bus is present in the HDMI connector and enables communication - between compatible devices. - -config VIDEO_SAMSUNG_S5P_CEC - tristate "Samsung S5P CEC driver" - depends on ARCH_EXYNOS || COMPILE_TEST - select CEC_CORE - select CEC_NOTIFIER - help - This is a driver for Samsung S5P HDMI CEC interface. It uses the - generic CEC framework interface. - CEC bus is present in the HDMI connector and enables communication - between compatible devices. - -config VIDEO_STI_HDMI_CEC - tristate "STMicroelectronics STiH4xx HDMI CEC driver" - depends on ARCH_STI || COMPILE_TEST - select CEC_CORE - select CEC_NOTIFIER - help - This is a driver for STIH4xx HDMI CEC interface. It uses the - generic CEC framework interface. - CEC bus is present in the HDMI connector and enables communication - between compatible devices. - -config VIDEO_STM32_HDMI_CEC - tristate "STMicroelectronics STM32 HDMI CEC driver" - depends on ARCH_STM32 || COMPILE_TEST - select REGMAP - select REGMAP_MMIO - select CEC_CORE - help - This is a driver for STM32 interface. It uses the - generic CEC framework interface. - CEC bus is present in the HDMI connector and enables communication - between compatible devices. - -config VIDEO_TEGRA_HDMI_CEC - tristate "Tegra HDMI CEC driver" - depends on ARCH_TEGRA || COMPILE_TEST - select CEC_CORE - select CEC_NOTIFIER - help - This is a driver for the Tegra HDMI CEC interface. It uses the - generic CEC framework interface. - The CEC bus is present in the HDMI connector and enables communication - between compatible devices. - -config VIDEO_SECO_CEC - tristate "SECO Boards HDMI CEC driver" - depends on (X86 || IA64) || COMPILE_TEST - depends on PCI && DMI - select CEC_CORE - select CEC_NOTIFIER - help - This is a driver for SECO Boards integrated CEC interface. - Selecting it will enable support for this device. - CEC bus is present in the HDMI connector and enables communication - between compatible devices. - -config VIDEO_SECO_RC - bool "SECO Boards IR RC5 support" - depends on VIDEO_SECO_CEC - depends on RC_CORE=y || RC_CORE = VIDEO_SECO_CEC - help - If you say yes here you will get support for the - SECO Boards Consumer-IR in seco-cec driver. - The embedded controller supports RC5 protocol only, default mapping - is set to rc-hauppauge. - -endif #CEC_PLATFORM_DRIVERS - menuconfig SDR_PLATFORM_DRIVERS bool "SDR platform devices" depends on MEDIA_SDR_SUPPORT |