diff options
-rw-r--r-- | drivers/soc/qcom/Kconfig | 17 | ||||
-rw-r--r-- | drivers/soc/qcom/Makefile | 2 | ||||
-rw-r--r-- | drivers/soc/qcom/llcc-sdm845.c | 94 | ||||
-rw-r--r-- | drivers/soc/qcom/llcc-slice.c | 335 | ||||
-rw-r--r-- | include/linux/soc/qcom/llcc-qcom.h | 180 |
5 files changed, 628 insertions, 0 deletions
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 9dc02f390ba3..d1a41852ae7a 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -39,6 +39,23 @@ config QCOM_GSBI functions for connecting the underlying serial UART, SPI, and I2C devices to the output pins. +config QCOM_LLCC + tristate "Qualcomm Technologies, Inc. LLCC driver" + depends on ARCH_QCOM + help + Qualcomm Technologies, Inc. platform specific + Last Level Cache Controller(LLCC) driver. This provides interfaces + to clients that use the LLCC. Say yes here to enable LLCC slice + driver. + +config QCOM_SDM845_LLCC + tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver" + depends on QCOM_LLCC + help + Say yes here to enable the LLCC driver for SDM845. This provides + data required to configure LLCC so that clients can start using the + LLCC slices. + config QCOM_MDT_LOADER tristate select QCOM_SCM diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index 19dcf957cb3a..5921454c4ddd 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -15,3 +15,5 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o obj-$(CONFIG_QCOM_SMSM) += smsm.o obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o obj-$(CONFIG_QCOM_APR) += apr.o +obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o +obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o diff --git a/drivers/soc/qcom/llcc-sdm845.c b/drivers/soc/qcom/llcc-sdm845.c new file mode 100644 index 000000000000..2e1e4f0a5db8 --- /dev/null +++ b/drivers/soc/qcom/llcc-sdm845.c @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/soc/qcom/llcc-qcom.h> + +/* + * SCT(System Cache Table) entry contains of the following members: + * usecase_id: Unique id for the client's use case + * slice_id: llcc slice id for each client + * max_cap: The maximum capacity of the cache slice provided in KB + * priority: Priority of the client used to select victim line for replacement + * fixed_size: Boolean indicating if the slice has a fixed capacity + * bonus_ways: Bonus ways are additional ways to be used for any slice, + * if client ends up using more than reserved cache ways. Bonus + * ways are allocated only if they are not reserved for some + * other client. + * res_ways: Reserved ways for the cache slice, the reserved ways cannot + * be used by any other client than the one its assigned to. + * cache_mode: Each slice operates as a cache, this controls the mode of the + * slice: normal or TCM(Tightly Coupled Memory) + * probe_target_ways: Determines what ways to probe for access hit. When + * configured to 1 only bonus and reserved ways are probed. + * When configured to 0 all ways in llcc are probed. + * dis_cap_alloc: Disable capacity based allocation for a client + * retain_on_pc: If this bit is set and client has maintained active vote + * then the ways assigned to this client are not flushed on power + * collapse. + * activate_on_init: Activate the slice immediately after the SCT is programmed + */ +#define SCT_ENTRY(uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, rp, a) \ + { \ + .usecase_id = uid, \ + .slice_id = sid, \ + .max_cap = mc, \ + .priority = p, \ + .fixed_size = fs, \ + .bonus_ways = bway, \ + .res_ways = rway, \ + .cache_mode = cmod, \ + .probe_target_ways = ptw, \ + .dis_cap_alloc = dca, \ + .retain_on_pc = rp, \ + .activate_on_init = a, \ + } + +static struct llcc_slice_config sdm845_data[] = { + SCT_ENTRY(LLCC_CPUSS, 1, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 1), + SCT_ENTRY(LLCC_VIDSC0, 2, 512, 2, 1, 0x0, 0x0f0, 0, 0, 1, 1, 0), + SCT_ENTRY(LLCC_VIDSC1, 3, 512, 2, 1, 0x0, 0x0f0, 0, 0, 1, 1, 0), + SCT_ENTRY(LLCC_ROTATOR, 4, 563, 2, 1, 0x0, 0x00e, 2, 0, 1, 1, 0), + SCT_ENTRY(LLCC_VOICE, 5, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), + SCT_ENTRY(LLCC_AUDIO, 6, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), + SCT_ENTRY(LLCC_MDMHPGRW, 7, 1024, 2, 0, 0xfc, 0xf00, 0, 0, 1, 1, 0), + SCT_ENTRY(LLCC_MDM, 8, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), + SCT_ENTRY(LLCC_CMPT, 10, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), + SCT_ENTRY(LLCC_GPUHTW, 11, 512, 1, 1, 0xc, 0x0, 0, 0, 1, 1, 0), + SCT_ENTRY(LLCC_GPU, 12, 2304, 1, 0, 0xff0, 0x2, 0, 0, 1, 1, 0), + SCT_ENTRY(LLCC_MMUHWT, 13, 256, 2, 0, 0x0, 0x1, 0, 0, 1, 0, 1), + SCT_ENTRY(LLCC_CMPTDMA, 15, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), + SCT_ENTRY(LLCC_DISP, 16, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), + SCT_ENTRY(LLCC_VIDFW, 17, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), + SCT_ENTRY(LLCC_MDMHPFX, 20, 1024, 2, 1, 0x0, 0xf00, 0, 0, 1, 1, 0), + SCT_ENTRY(LLCC_MDMPNG, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0, 1, 1, 0), + SCT_ENTRY(LLCC_AUDHW, 22, 1024, 1, 1, 0xffc, 0x2, 0, 0, 1, 1, 0), +}; + +static int sdm845_qcom_llcc_probe(struct platform_device *pdev) +{ + return qcom_llcc_probe(pdev, sdm845_data, ARRAY_SIZE(sdm845_data)); +} + +static const struct of_device_id sdm845_qcom_llcc_of_match[] = { + { .compatible = "qcom,sdm845-llcc", }, + { } +}; + +static struct platform_driver sdm845_qcom_llcc_driver = { + .driver = { + .name = "sdm845-llcc", + .of_match_table = sdm845_qcom_llcc_of_match, + }, + .probe = sdm845_qcom_llcc_probe, +}; +module_platform_driver(sdm845_qcom_llcc_driver); + +MODULE_DESCRIPTION("QCOM sdm845 LLCC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/soc/qcom/llcc-slice.c b/drivers/soc/qcom/llcc-slice.c new file mode 100644 index 000000000000..fcaad1a4b41d --- /dev/null +++ b/drivers/soc/qcom/llcc-slice.c @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. + * + */ + +#include <linux/bitmap.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mutex.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/soc/qcom/llcc-qcom.h> + +#define ACTIVATE BIT(0) +#define DEACTIVATE BIT(1) +#define ACT_CTRL_OPCODE_ACTIVATE BIT(0) +#define ACT_CTRL_OPCODE_DEACTIVATE BIT(1) +#define ACT_CTRL_ACT_TRIG BIT(0) +#define ACT_CTRL_OPCODE_SHIFT 0x01 +#define ATTR1_PROBE_TARGET_WAYS_SHIFT 0x02 +#define ATTR1_FIXED_SIZE_SHIFT 0x03 +#define ATTR1_PRIORITY_SHIFT 0x04 +#define ATTR1_MAX_CAP_SHIFT 0x10 +#define ATTR0_RES_WAYS_MASK GENMASK(11, 0) +#define ATTR0_BONUS_WAYS_MASK GENMASK(27, 16) +#define ATTR0_BONUS_WAYS_SHIFT 0x10 +#define LLCC_STATUS_READ_DELAY 100 + +#define CACHE_LINE_SIZE_SHIFT 6 + +#define LLCC_COMMON_STATUS0 0x0003000c +#define LLCC_LB_CNT_MASK GENMASK(31, 28) +#define LLCC_LB_CNT_SHIFT 28 + +#define MAX_CAP_TO_BYTES(n) (n * SZ_1K) +#define LLCC_TRP_ACT_CTRLn(n) (n * SZ_4K) +#define LLCC_TRP_STATUSn(n) (4 + n * SZ_4K) +#define LLCC_TRP_ATTR0_CFGn(n) (0x21000 + SZ_8 * n) +#define LLCC_TRP_ATTR1_CFGn(n) (0x21004 + SZ_8 * n) + +#define BANK_OFFSET_STRIDE 0x80000 + +static struct llcc_drv_data *drv_data; + +static const struct regmap_config llcc_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .fast_io = true, +}; + +/** + * llcc_slice_getd - get llcc slice descriptor + * @uid: usecase_id for the client + * + * A pointer to llcc slice descriptor will be returned on success and + * and error pointer is returned on failure + */ +struct llcc_slice_desc *llcc_slice_getd(u32 uid) +{ + const struct llcc_slice_config *cfg; + struct llcc_slice_desc *desc; + u32 sz, count; + + cfg = drv_data->cfg; + sz = drv_data->cfg_size; + + for (count = 0; cfg && count < sz; count++, cfg++) + if (cfg->usecase_id == uid) + break; + + if (count == sz || !cfg) + return ERR_PTR(-ENODEV); + + desc = kzalloc(sizeof(*desc), GFP_KERNEL); + if (!desc) + return ERR_PTR(-ENOMEM); + + desc->slice_id = cfg->slice_id; + desc->slice_size = cfg->max_cap; + + return desc; +} +EXPORT_SYMBOL_GPL(llcc_slice_getd); + +/** + * llcc_slice_putd - llcc slice descritpor + * @desc: Pointer to llcc slice descriptor + */ +void llcc_slice_putd(struct llcc_slice_desc *desc) +{ + kfree(desc); +} +EXPORT_SYMBOL_GPL(llcc_slice_putd); + +static int llcc_update_act_ctrl(u32 sid, + u32 act_ctrl_reg_val, u32 status) +{ + u32 act_ctrl_reg; + u32 status_reg; + u32 slice_status; + int ret; + + act_ctrl_reg = drv_data->bcast_off + LLCC_TRP_ACT_CTRLn(sid); + status_reg = drv_data->bcast_off + LLCC_TRP_STATUSn(sid); + + /* Set the ACTIVE trigger */ + act_ctrl_reg_val |= ACT_CTRL_ACT_TRIG; + ret = regmap_write(drv_data->regmap, act_ctrl_reg, act_ctrl_reg_val); + if (ret) + return ret; + + /* Clear the ACTIVE trigger */ + act_ctrl_reg_val &= ~ACT_CTRL_ACT_TRIG; + ret = regmap_write(drv_data->regmap, act_ctrl_reg, act_ctrl_reg_val); + if (ret) + return ret; + + ret = regmap_read_poll_timeout(drv_data->regmap, status_reg, + slice_status, !(slice_status & status), + 0, LLCC_STATUS_READ_DELAY); + return ret; +} + +/** + * llcc_slice_activate - Activate the llcc slice + * @desc: Pointer to llcc slice descriptor + * + * A value of zero will be returned on success and a negative errno will + * be returned in error cases + */ +int llcc_slice_activate(struct llcc_slice_desc *desc) +{ + int ret; + u32 act_ctrl_val; + + mutex_lock(&drv_data->lock); + if (test_bit(desc->slice_id, drv_data->bitmap)) { + mutex_unlock(&drv_data->lock); + return 0; + } + + act_ctrl_val = ACT_CTRL_OPCODE_ACTIVATE << ACT_CTRL_OPCODE_SHIFT; + + ret = llcc_update_act_ctrl(desc->slice_id, act_ctrl_val, + DEACTIVATE); + if (ret) { + mutex_unlock(&drv_data->lock); + return ret; + } + + __set_bit(desc->slice_id, drv_data->bitmap); + mutex_unlock(&drv_data->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(llcc_slice_activate); + +/** + * llcc_slice_deactivate - Deactivate the llcc slice + * @desc: Pointer to llcc slice descriptor + * + * A value of zero will be returned on success and a negative errno will + * be returned in error cases + */ +int llcc_slice_deactivate(struct llcc_slice_desc *desc) +{ + u32 act_ctrl_val; + int ret; + + mutex_lock(&drv_data->lock); + if (!test_bit(desc->slice_id, drv_data->bitmap)) { + mutex_unlock(&drv_data->lock); + return 0; + } + act_ctrl_val = ACT_CTRL_OPCODE_DEACTIVATE << ACT_CTRL_OPCODE_SHIFT; + + ret = llcc_update_act_ctrl(desc->slice_id, act_ctrl_val, + ACTIVATE); + if (ret) { + mutex_unlock(&drv_data->lock); + return ret; + } + + __clear_bit(desc->slice_id, drv_data->bitmap); + mutex_unlock(&drv_data->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(llcc_slice_deactivate); + +/** + * llcc_get_slice_id - return the slice id + * @desc: Pointer to llcc slice descriptor + */ +int llcc_get_slice_id(struct llcc_slice_desc *desc) +{ + return desc->slice_id; +} +EXPORT_SYMBOL_GPL(llcc_get_slice_id); + +/** + * llcc_get_slice_size - return the slice id + * @desc: Pointer to llcc slice descriptor + */ +size_t llcc_get_slice_size(struct llcc_slice_desc *desc) +{ + return desc->slice_size; +} +EXPORT_SYMBOL_GPL(llcc_get_slice_size); + +static int qcom_llcc_cfg_program(struct platform_device *pdev) +{ + int i; + u32 attr1_cfg; + u32 attr0_cfg; + u32 attr1_val; + u32 attr0_val; + u32 max_cap_cacheline; + u32 sz; + int ret; + const struct llcc_slice_config *llcc_table; + struct llcc_slice_desc desc; + u32 bcast_off = drv_data->bcast_off; + + sz = drv_data->cfg_size; + llcc_table = drv_data->cfg; + + for (i = 0; i < sz; i++) { + attr1_cfg = bcast_off + + LLCC_TRP_ATTR1_CFGn(llcc_table[i].slice_id); + attr0_cfg = bcast_off + + LLCC_TRP_ATTR0_CFGn(llcc_table[i].slice_id); + + attr1_val = llcc_table[i].cache_mode; + attr1_val |= llcc_table[i].probe_target_ways << + ATTR1_PROBE_TARGET_WAYS_SHIFT; + attr1_val |= llcc_table[i].fixed_size << + ATTR1_FIXED_SIZE_SHIFT; + attr1_val |= llcc_table[i].priority << + ATTR1_PRIORITY_SHIFT; + + max_cap_cacheline = MAX_CAP_TO_BYTES(llcc_table[i].max_cap); + + /* LLCC instances can vary for each target. + * The SW writes to broadcast register which gets propagated + * to each llcc instace (llcc0,.. llccN). + * Since the size of the memory is divided equally amongst the + * llcc instances, we need to configure the max cap accordingly. + */ + max_cap_cacheline = max_cap_cacheline / drv_data->num_banks; + max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT; + attr1_val |= max_cap_cacheline << ATTR1_MAX_CAP_SHIFT; + + attr0_val = llcc_table[i].res_ways & ATTR0_RES_WAYS_MASK; + attr0_val |= llcc_table[i].bonus_ways << ATTR0_BONUS_WAYS_SHIFT; + + ret = regmap_write(drv_data->regmap, attr1_cfg, attr1_val); + if (ret) + return ret; + ret = regmap_write(drv_data->regmap, attr0_cfg, attr0_val); + if (ret) + return ret; + if (llcc_table[i].activate_on_init) { + desc.slice_id = llcc_table[i].slice_id; + ret = llcc_slice_activate(&desc); + } + } + return ret; +} + +int qcom_llcc_probe(struct platform_device *pdev, + const struct llcc_slice_config *llcc_cfg, u32 sz) +{ + u32 num_banks; + struct device *dev = &pdev->dev; + struct resource *res; + void __iomem *base; + int ret, i; + + drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL); + if (!drv_data) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + drv_data->regmap = devm_regmap_init_mmio(dev, base, + &llcc_regmap_config); + if (IS_ERR(drv_data->regmap)) + return PTR_ERR(drv_data->regmap); + + ret = regmap_read(drv_data->regmap, LLCC_COMMON_STATUS0, + &num_banks); + if (ret) + return ret; + + num_banks &= LLCC_LB_CNT_MASK; + num_banks >>= LLCC_LB_CNT_SHIFT; + drv_data->num_banks = num_banks; + + for (i = 0; i < sz; i++) + if (llcc_cfg[i].slice_id > drv_data->max_slices) + drv_data->max_slices = llcc_cfg[i].slice_id; + + drv_data->offsets = devm_kcalloc(dev, num_banks, sizeof(u32), + GFP_KERNEL); + if (!drv_data->offsets) + return -ENOMEM; + + for (i = 0; i < num_banks; i++) + drv_data->offsets[i] = i * BANK_OFFSET_STRIDE; + + drv_data->bcast_off = num_banks * BANK_OFFSET_STRIDE; + + drv_data->bitmap = devm_kcalloc(dev, + BITS_TO_LONGS(drv_data->max_slices), sizeof(unsigned long), + GFP_KERNEL); + if (!drv_data->bitmap) + return -ENOMEM; + + drv_data->cfg = llcc_cfg; + drv_data->cfg_size = sz; + mutex_init(&drv_data->lock); + platform_set_drvdata(pdev, drv_data); + + return qcom_llcc_cfg_program(pdev); +} +EXPORT_SYMBOL_GPL(qcom_llcc_probe); diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h new file mode 100644 index 000000000000..7e3b9c605ab2 --- /dev/null +++ b/include/linux/soc/qcom/llcc-qcom.h @@ -0,0 +1,180 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. + * + */ + +#include <linux/platform_device.h> +#ifndef __LLCC_QCOM__ +#define __LLCC_QCOM__ + +#define LLCC_CPUSS 1 +#define LLCC_VIDSC0 2 +#define LLCC_VIDSC1 3 +#define LLCC_ROTATOR 4 +#define LLCC_VOICE 5 +#define LLCC_AUDIO 6 +#define LLCC_MDMHPGRW 7 +#define LLCC_MDM 8 +#define LLCC_CMPT 10 +#define LLCC_GPUHTW 11 +#define LLCC_GPU 12 +#define LLCC_MMUHWT 13 +#define LLCC_CMPTDMA 15 +#define LLCC_DISP 16 +#define LLCC_VIDFW 17 +#define LLCC_MDMHPFX 20 +#define LLCC_MDMPNG 21 +#define LLCC_AUDHW 22 + +/** + * llcc_slice_desc - Cache slice descriptor + * @slice_id: llcc slice id + * @slice_size: Size allocated for the llcc slice + */ +struct llcc_slice_desc { + u32 slice_id; + size_t slice_size; +}; + +/** + * llcc_slice_config - Data associated with the llcc slice + * @usecase_id: usecase id for which the llcc slice is used + * @slice_id: llcc slice id assigned to each slice + * @max_cap: maximum capacity of the llcc slice + * @priority: priority of the llcc slice + * @fixed_size: whether the llcc slice can grow beyond its size + * @bonus_ways: bonus ways associated with llcc slice + * @res_ways: reserved ways associated with llcc slice + * @cache_mode: mode of the llcc slice + * @probe_target_ways: Probe only reserved and bonus ways on a cache miss + * @dis_cap_alloc: Disable capacity based allocation + * @retain_on_pc: Retain through power collapse + * @activate_on_init: activate the slice on init + */ +struct llcc_slice_config { + u32 usecase_id; + u32 slice_id; + u32 max_cap; + u32 priority; + bool fixed_size; + u32 bonus_ways; + u32 res_ways; + u32 cache_mode; + u32 probe_target_ways; + bool dis_cap_alloc; + bool retain_on_pc; + bool activate_on_init; +}; + +/** + * llcc_drv_data - Data associated with the llcc driver + * @regmap: regmap associated with the llcc device + * @cfg: pointer to the data structure for slice configuration + * @lock: mutex associated with each slice + * @cfg_size: size of the config data table + * @max_slices: max slices as read from device tree + * @bcast_off: Offset of the broadcast bank + * @num_banks: Number of llcc banks + * @bitmap: Bit map to track the active slice ids + * @offsets: Pointer to the bank offsets array + */ +struct llcc_drv_data { + struct regmap *regmap; + const struct llcc_slice_config *cfg; + struct mutex lock; + u32 cfg_size; + u32 max_slices; + u32 bcast_off; + u32 num_banks; + unsigned long *bitmap; + u32 *offsets; +}; + +#if IS_ENABLED(CONFIG_QCOM_LLCC) +/** + * llcc_slice_getd - get llcc slice descriptor + * @uid: usecase_id of the client + */ +struct llcc_slice_desc *llcc_slice_getd(u32 uid); + +/** + * llcc_slice_putd - llcc slice descritpor + * @desc: Pointer to llcc slice descriptor + */ +void llcc_slice_putd(struct llcc_slice_desc *desc); + +/** + * llcc_get_slice_id - get slice id + * @desc: Pointer to llcc slice descriptor + */ +int llcc_get_slice_id(struct llcc_slice_desc *desc); + +/** + * llcc_get_slice_size - llcc slice size + * @desc: Pointer to llcc slice descriptor + */ +size_t llcc_get_slice_size(struct llcc_slice_desc *desc); + +/** + * llcc_slice_activate - Activate the llcc slice + * @desc: Pointer to llcc slice descriptor + */ +int llcc_slice_activate(struct llcc_slice_desc *desc); + +/** + * llcc_slice_deactivate - Deactivate the llcc slice + * @desc: Pointer to llcc slice descriptor + */ +int llcc_slice_deactivate(struct llcc_slice_desc *desc); + +/** + * qcom_llcc_probe - program the sct table + * @pdev: platform device pointer + * @table: soc sct table + * @sz: Size of the config table + */ +int qcom_llcc_probe(struct platform_device *pdev, + const struct llcc_slice_config *table, u32 sz); +#else +static inline struct llcc_slice_desc *llcc_slice_getd(u32 uid) +{ + return NULL; +} + +static inline void llcc_slice_putd(struct llcc_slice_desc *desc) +{ + +}; + +static inline int llcc_get_slice_id(struct llcc_slice_desc *desc) +{ + return -EINVAL; +} + +static inline size_t llcc_get_slice_size(struct llcc_slice_desc *desc) +{ + return 0; +} +static inline int llcc_slice_activate(struct llcc_slice_desc *desc) +{ + return -EINVAL; +} + +static inline int llcc_slice_deactivate(struct llcc_slice_desc *desc) +{ + return -EINVAL; +} +static inline int qcom_llcc_probe(struct platform_device *pdev, + const struct llcc_slice_config *table, u32 sz) +{ + return -ENODEV; +} + +static inline int qcom_llcc_remove(struct platform_device *pdev) +{ + return -ENODEV; +} +#endif + +#endif |