diff options
author | Bjorn Helgaas <bhelgaas@google.com> | 2018-05-02 08:53:19 -0500 |
---|---|---|
committer | Bjorn Helgaas <helgaas@kernel.org> | 2018-05-10 16:50:18 -0500 |
commit | 82e1719c4cd65bd7f7847d6c02376cfca3d5e793 (patch) | |
tree | ed0e8c028a78f52196fdce7af96eee2d4856db0c /drivers/pci/quirks.c | |
parent | 780473508ace12fa58fb50339d3899c055ec4cad (diff) |
PCI: Clean up whitespace in quirks.c
Clean up whitespace, capitalization, etc. in comments. No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Diffstat (limited to 'drivers/pci/quirks.c')
-rw-r--r-- | drivers/pci/quirks.c | 664 |
1 files changed, 329 insertions, 335 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 0f2b117cc59c..de7c77e2ebbd 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -199,9 +199,10 @@ static void quirk_mmio_always_on(struct pci_dev *dev) DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on); -/* The Mellanox Tavor device gives false positive parity errors - * Mark this device with a broken_parity_status, to allow - * PCI scanning code to "skip" this now blacklisted device. +/* + * The Mellanox Tavor device gives false positive parity errors. Mark this + * device with a broken_parity_status to allow PCI scanning code to "skip" + * this now blacklisted device. */ static void quirk_mellanox_tavor(struct pci_dev *dev) { @@ -210,15 +211,19 @@ static void quirk_mellanox_tavor(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR, quirk_mellanox_tavor); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE, quirk_mellanox_tavor); -/* Deal with broken BIOSes that neglect to enable passive release, - which can cause problems in combination with the 82441FX/PPro MTRRs */ +/* + * Deal with broken BIOSes that neglect to enable passive release, + * which can cause problems in combination with the 82441FX/PPro MTRRs + */ static void quirk_passive_release(struct pci_dev *dev) { struct pci_dev *d = NULL; unsigned char dlc; - /* We have to make sure a particular bit is set in the PIIX3 - ISA bridge, so we have to go out and find it. */ + /* + * We have to make sure a particular bit is set in the PIIX3 + * ISA bridge, so we have to go out and find it. + */ while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) { pci_read_config_byte(d, 0x82, &dlc); if (!(dlc & 1<<1)) { @@ -231,13 +236,14 @@ static void quirk_passive_release(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); -/* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround - but VIA don't answer queries. If you happen to have good contacts at VIA - ask them for me please -- Alan - - This appears to be BIOS not version dependent. So presumably there is a - chipset level fix */ - +/* + * The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a + * workaround but VIA don't answer queries. If you happen to have good + * contacts at VIA ask them for me please -- Alan + * + * This appears to be BIOS not version dependent. So presumably there is a + * chipset level fix. + */ static void quirk_isa_dma_hangs(struct pci_dev *dev) { if (!isa_dma_bridge_buggy) { @@ -245,10 +251,10 @@ static void quirk_isa_dma_hangs(struct pci_dev *dev) pci_info(dev, "Activating ISA DMA hang workarounds\n"); } } - /* - * Its not totally clear which chipsets are the problematic ones - * We know 82C586 and 82C596 variants are affected. - */ +/* + * It's not totally clear which chipsets are the problematic ones. We know + * 82C586 and 82C596 variants are affected. + */ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs); @@ -277,9 +283,7 @@ static void quirk_tigerpoint_bm_sts(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts); -/* - * Chipsets where PCI->PCI transfers vanish or hang - */ +/* Chipsets where PCI->PCI transfers vanish or hang */ static void quirk_nopcipci(struct pci_dev *dev) { if ((pci_pci_problems & PCIPCI_FAIL) == 0) { @@ -302,9 +306,7 @@ static void quirk_nopciamd(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd); -/* - * Triton requires workarounds to be used by the drivers - */ +/* Triton requires workarounds to be used by the drivers */ static void quirk_triton(struct pci_dev *dev) { if ((pci_pci_problems&PCIPCI_TRITON) == 0) { @@ -318,53 +320,62 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_tr DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton); /* - * VIA Apollo KT133 needs PCI latency patch - * Made according to a windows driver based patch by George E. Breese - * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm - * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for - * the info on which Mr Breese based his work. + * VIA Apollo KT133 needs PCI latency patch + * Made according to a Windows driver-based patch by George E. Breese; + * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm + * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for the info on + * which Mr Breese based his work. * - * Updated based on further information from the site and also on - * information provided by VIA + * Updated based on further information from the site and also on + * information provided by VIA */ static void quirk_vialatency(struct pci_dev *dev) { struct pci_dev *p; u8 busarb; - /* Ok we have a potential problem chipset here. Now see if we have - a buggy southbridge */ + /* + * Ok, we have a potential problem chipset here. Now see if we have + * a buggy southbridge. + */ p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL); if (p != NULL) { - /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */ - /* Check for buggy part revisions */ + + /* + * 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; + * thanks Dan Hollis. + * Check for buggy part revisions + */ if (p->revision < 0x40 || p->revision > 0x42) goto exit; } else { p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); if (p == NULL) /* No problem parts */ goto exit; + /* Check for buggy part revisions */ if (p->revision < 0x10 || p->revision > 0x12) goto exit; } /* - * Ok we have the problem. Now set the PCI master grant to - * occur every master grant. The apparent bug is that under high - * PCI load (quite common in Linux of course) you can get data - * loss when the CPU is held off the bus for 3 bus master requests - * This happens to include the IDE controllers.... + * Ok we have the problem. Now set the PCI master grant to occur + * every master grant. The apparent bug is that under high PCI load + * (quite common in Linux of course) you can get data loss when the + * CPU is held off the bus for 3 bus master requests. This happens + * to include the IDE controllers.... * - * VIA only apply this fix when an SB Live! is present but under - * both Linux and Windows this isn't enough, and we have seen - * corruption without SB Live! but with things like 3 UDMA IDE - * controllers. So we ignore that bit of the VIA recommendation.. + * VIA only apply this fix when an SB Live! is present but under + * both Linux and Windows this isn't enough, and we have seen + * corruption without SB Live! but with things like 3 UDMA IDE + * controllers. So we ignore that bit of the VIA recommendation.. */ - pci_read_config_byte(dev, 0x76, &busarb); - /* Set bit 4 and bi 5 of byte 76 to 0x01 - "Master priority rotation on every PCI master grant */ + + /* + * Set bit 4 and bit 5 of byte 76 to 0x01 + * "Master priority rotation on every PCI master grant" + */ busarb &= ~(1<<5); busarb |= (1<<4); pci_write_config_byte(dev, 0x76, busarb); @@ -380,9 +391,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vial DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); -/* - * VIA Apollo VP3 needs ETBF on BT848/878 - */ +/* VIA Apollo VP3 needs ETBF on BT848/878 */ static void quirk_viaetbf(struct pci_dev *dev) { if ((pci_pci_problems&PCIPCI_VIAETBF) == 0) { @@ -402,10 +411,9 @@ static void quirk_vsfx(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx); /* - * Ali Magik requires workarounds to be used by the drivers - * that DMA to AGP space. Latency must be set to 0xA and triton - * workaround applied too - * [Info kindly provided by ALi] + * ALi Magik requires workarounds to be used by the drivers that DMA to AGP + * space. Latency must be set to 0xA and Triton workaround applied too. + * [Info kindly provided by ALi] */ static void quirk_alimagik(struct pci_dev *dev) { @@ -417,10 +425,7 @@ static void quirk_alimagik(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik); -/* - * Natoma has some interesting boundary conditions with Zoran stuff - * at least - */ +/* Natoma has some interesting boundary conditions with Zoran stuff at least */ static void quirk_natoma(struct pci_dev *dev) { if ((pci_pci_problems&PCIPCI_NATOMA) == 0) { @@ -436,8 +441,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quir DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma); /* - * This chip can cause PCI parity errors if config register 0xA0 is read - * while DMAs are occurring. + * This chip can cause PCI parity errors if config register 0xA0 is read + * while DMAs are occurring. */ static void quirk_citrine(struct pci_dev *dev) { @@ -477,8 +482,8 @@ static void quirk_extend_bar_to_page(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, 0x034a, quirk_extend_bar_to_page); /* - * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. - * If it's needed, re-allocate the region. + * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. + * If it's needed, re-allocate the region. */ static void quirk_s3_64M(struct pci_dev *dev) { @@ -569,8 +574,8 @@ static void quirk_io_region(struct pci_dev *dev, int port, } /* - * ATI Northbridge setups MCE the processor if you even - * read somewhere between 0x3b0->0x3bb or read 0x3d3 + * ATI Northbridge setups MCE the processor if you even read somewhere + * between 0x3b0->0x3bb or read 0x3d3 */ static void quirk_ati_exploding_mce(struct pci_dev *dev) { @@ -585,6 +590,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_ * In the AMD NL platform, this device ([1022:7912]) has a class code of * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will * claim it. + * * But the dwc3 driver is a more specific driver for this device, and we'd * prefer to use it instead of xhci. To prevent xhci from claiming the * device, change the class code to 0x0c03fe, which the PCI r3.0 spec @@ -604,11 +610,10 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB, quirk_amd_nl_class); /* - * Let's make the southbridge information explicit instead - * of having to worry about people probing the ACPI areas, - * for example.. (Yes, it happens, and if you read the wrong - * ACPI register it will put the machine to sleep with no - * way of waking it up again. Bummer). + * Let's make the southbridge information explicit instead of having to + * worry about people probing the ACPI areas, for example.. (Yes, it + * happens, and if you read the wrong ACPI register it will put the machine + * to sleep with no way of waking it up again. Bummer). * * ALI M7101: Two IO regions pointed to by words at * 0xE0 (64 bytes of ACPI registers) @@ -664,6 +669,7 @@ static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int break; size = bit; } + /* * For now we only print it out. Eventually we'll want to * reserve it, but let's get enough confirmation reports first. @@ -735,8 +741,7 @@ static void quirk_ich4_lpc_acpi(struct pci_dev *dev) * priority and can't tell whether the legacy device or the one created * here is really at that address. This happens on boards with broken * BIOSes. - */ - + */ pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); if (enable & ICH4_ACPI_EN) quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, @@ -773,7 +778,8 @@ static void ich6_lpc_acpi_gpio(struct pci_dev *dev) "ICH6 GPIO"); } -static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize) +static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, + const char *name, int dynsize) { u32 val; u32 size, base; @@ -797,7 +803,10 @@ static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const cha } base &= ~(size-1); - /* Just print it out for now. We should reserve it after more debugging */ + /* + * Just print it out for now. We should reserve it after more + * debugging. + */ pci_info(dev, "%s PIO at %04x-%04x\n", name, base, base+size-1); } @@ -813,7 +822,8 @@ static void quirk_ich6_lpc(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc); -static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name) +static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, + const char *name) { u32 val; u32 mask, base; @@ -824,15 +834,15 @@ static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const cha if (!(val & 1)) return; - /* - * IO base in bits 15:2, mask in bits 23:18, both - * are dword-based - */ + /* IO base in bits 15:2, mask in bits 23:18, both are dword-based */ base = val & 0xfffc; mask = (val >> 16) & 0xfc; mask |= 3; - /* Just print it out for now. We should reserve it after more debugging */ + /* + * Just print it out for now. We should reserve it after more + * debugging. + */ pci_info(dev, "%s PIO at %04x (mask %04x)\n", name, base, mask); } @@ -904,8 +914,8 @@ static void quirk_vt8235_acpi(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); /* - * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back: - * Disable fast back-to-back on the secondary bus segment + * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast + * back-to-back: Disable fast back-to-back on the secondary bus segment */ static void quirk_xio2000a(struct pci_dev *dev) { @@ -930,8 +940,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A, * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip * devices to the external APIC. * - * TODO: When we have device-specific interrupt routers, - * this code will go away from quirks. + * TODO: When we have device-specific interrupt routers, this code will go + * away from quirks. */ static void quirk_via_ioapic(struct pci_dev *dev) { @@ -972,13 +982,13 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); /* - * The AMD io apic can hang the box when an apic irq is masked. + * The AMD IO-APIC can hang the box when an APIC IRQ is masked. * We check all revs >= B0 (yet not in the pre production!) as the bug * is currently marked NoFix * * We have multiple reports of hangs with this chipset that went away with * noapic specified. For the moment we assume it's the erratum. We may be wrong - * of course. However the advice is demonstrably good even if so.. + * of course. However the advice is demonstrably good even if so. */ static void quirk_amd_ioapic(struct pci_dev *dev) { @@ -994,7 +1004,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_a static void quirk_cavium_sriov_rnm_link(struct pci_dev *dev) { - /* Fix for improper SRIOV configuration on Cavium cn88xx RNM device */ + /* Fix for improper SR-IOV configuration on Cavium cn88xx RNM device */ if (dev->subsystem_device == 0xa118) dev->sriov->link = dev->devfn; } @@ -1016,19 +1026,17 @@ static void quirk_amd_8131_mmrbc(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc); /* - * FIXME: it is questionable that quirk_via_acpi - * is needed. It shows up as an ISA bridge, and does not - * support the PCI_INTERRUPT_LINE register at all. Therefore - * it seems like setting the pci_dev's 'irq' to the - * value of the ACPI SCI interrupt is only done for convenience. + * FIXME: it is questionable that quirk_via_acpi() is needed. It shows up + * as an ISA bridge, and does not support the PCI_INTERRUPT_LINE register + * at all. Therefore it seems like setting the pci_dev's IRQ to the value + * of the ACPI SCI interrupt is only done for convenience. * -jgarzik */ static void quirk_via_acpi(struct pci_dev *d) { - /* - * VIA ACPI device: SCI IRQ line in PCI config byte 0x42 - */ u8 irq; + + /* VIA ACPI device: SCI IRQ line in PCI config byte 0x42 */ pci_read_config_byte(d, 0x42, &irq); irq &= 0xf; if (irq && (irq != 2)) @@ -1037,11 +1045,7 @@ static void quirk_via_acpi(struct pci_dev *d) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi); - -/* - * VIA bridges which have VLink - */ - +/* VIA bridges which have VLink */ static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18; static void quirk_via_bridge(struct pci_dev *dev) @@ -1049,9 +1053,11 @@ static void quirk_via_bridge(struct pci_dev *dev) /* See what bridge we have and find the device ranges */ switch (dev->device) { case PCI_DEVICE_ID_VIA_82C686: - /* The VT82C686 is special, it attaches to PCI and can have - any device number. All its subdevices are functions of - that single device. */ + /* + * The VT82C686 is special; it attaches to PCI and can have + * any device number. All its subdevices are functions of + * that single device. + */ via_vlink_dev_lo = PCI_SLOT(dev->devfn); via_vlink_dev_hi = PCI_SLOT(dev->devfn); break; @@ -1079,19 +1085,17 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_b DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge); -/** - * quirk_via_vlink - VIA VLink IRQ number update - * @dev: PCI device +/* + * quirk_via_vlink - VIA VLink IRQ number update + * @dev: PCI device * - * If the device we are dealing with is on a PIC IRQ we need to - * ensure that the IRQ line register which usually is not relevant - * for PCI cards, is actually written so that interrupts get sent - * to the right place. - * We only do this on systems where a VIA south bridge was detected, - * and only for VIA devices on the motherboard (see quirk_via_bridge - * above). + * If the device we are dealing with is on a PIC IRQ we need to ensure that + * the IRQ line register which usually is not relevant for PCI cards, is + * actually written so that interrupts get sent to the right place. + * + * We only do this on systems where a VIA south bridge was detected, and + * only for VIA devices on the motherboard (see quirk_via_bridge above). */ - static void quirk_via_vlink(struct pci_dev *dev) { u8 irq, new_irq; @@ -1111,9 +1115,10 @@ static void quirk_via_vlink(struct pci_dev *dev) PCI_SLOT(dev->devfn) < via_vlink_dev_lo) return; - /* This is an internal VLink device on a PIC interrupt. The BIOS - ought to have set this but may not have, so we redo it */ - + /* + * This is an internal VLink device on a PIC interrupt. The BIOS + * ought to have set this but may not have, so we redo it. + */ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); if (new_irq != irq) { pci_info(dev, "VIA VLink IRQ fixup, from %d to %d\n", @@ -1125,10 +1130,9 @@ static void quirk_via_vlink(struct pci_dev *dev) DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink); /* - * VIA VT82C598 has its device ID settable and many BIOSes - * set it to the ID of VT82C597 for backward compatibility. - * We need to switch it off to be able to recognize the real - * type of the chip. + * VIA VT82C598 has its device ID settable and many BIOSes set it to the ID + * of VT82C597 for backward compatibility. We need to switch it off to be + * able to recognize the real type of the chip. */ static void quirk_vt82c598_id(struct pci_dev *dev) { @@ -1138,10 +1142,10 @@ static void quirk_vt82c598_id(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id); /* - * CardBus controllers have a legacy base address that enables them - * to respond as i82365 pcmcia controllers. We don't want them to - * do this even if the Linux CardBus driver is not loaded, because - * the Linux i82365 driver does not (and should not) handle CardBus. + * CardBus controllers have a legacy base address that enables them to + * respond as i82365 pcmcia controllers. We don't want them to do this + * even if the Linux CardBus driver is not loaded, because the Linux i82365 + * driver does not (and should not) handle CardBus. */ static void quirk_cardbus_legacy(struct pci_dev *dev) { @@ -1153,11 +1157,11 @@ DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); /* - * Following the PCI ordering rules is optional on the AMD762. I'm not - * sure what the designers were smoking but let's not inhale... + * Following the PCI ordering rules is optional on the AMD762. I'm not sure + * what the designers were smoking but let's not inhale... * - * To be fair to AMD, it follows the spec by default, its BIOS people - * who turn it off! + * To be fair to AMD, it follows the spec by default, it's BIOS people who + * turn it off! */ static void quirk_amd_ordering(struct pci_dev *dev) { @@ -1176,11 +1180,11 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); /* - * DreamWorks provided workaround for Dunord I-3000 problem + * DreamWorks-provided workaround for Dunord I-3000 problem * - * This card decodes and responds to addresses not apparently - * assigned to it. We force a larger allocation to ensure that - * nothing gets put too close to it. + * This card decodes and responds to addresses not apparently assigned to + * it. We force a larger allocation to ensure that nothing gets put too + * close to it. */ static void quirk_dunord(struct pci_dev *dev) { @@ -1193,10 +1197,9 @@ static void quirk_dunord(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord); /* - * i82380FB mobile docking controller: its PCI-to-PCI bridge - * is subtractive decoding (transparent), and does indicate this - * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80 - * instead of 0x01. + * i82380FB mobile docking controller: its PCI-to-PCI bridge is subtractive + * decoding (transparent), and does indicate this in the ProgIf. + * Unfortunately, the ProgIf value is wrong - 0x80 instead of 0x01. */ static void quirk_transparent_bridge(struct pci_dev *dev) { @@ -1206,10 +1209,10 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge); /* - * Common misconfiguration of the MediaGX/Geode PCI master that will - * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 - * datasheets found at http://www.national.com/analog for info on what - * these bits do. <christer@weinigel.se> + * Common misconfiguration of the MediaGX/Geode PCI master that will reduce + * PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 datasheets + * found at http://www.national.com/analog for info on what these bits do. + * <christer@weinigel.se> */ static void quirk_mediagx_master(struct pci_dev *dev) { @@ -1227,9 +1230,9 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, qui DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); /* - * Ensure C0 rev restreaming is off. This is normally done by - * the BIOS but in the odd case it is not the results are corruption - * hence the presence of a Linux check + * Ensure C0 rev restreaming is off. This is normally done by the BIOS but + * in the odd case it is not the results are corruption hence the presence + * of a Linux check. */ static void quirk_disable_pxb(struct pci_dev *pdev) { @@ -1273,9 +1276,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); -/* - * Serverworks CSB5 IDE does not fully support native mode - */ +/* Serverworks CSB5 IDE does not fully support native mode */ static void quirk_svwks_csb5ide(struct pci_dev *pdev) { u8 prog; @@ -1289,9 +1290,7 @@ static void quirk_svwks_csb5ide(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide); -/* - * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same - */ +/* Intel 82801CAM ICH3-M datasheet says IDE modes must be the same */ static void quirk_ide_samemode(struct pci_dev *pdev) { u8 prog; @@ -1307,10 +1306,7 @@ static void quirk_ide_samemode(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); -/* - * Some ATA devices break if put into D3 - */ - +/* Some ATA devices break if put into D3 */ static void quirk_no_ata_d3(struct pci_dev *pdev) { pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; @@ -1328,7 +1324,8 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); -/* This was originally an Alpha specific thing, but it really fits here. +/* + * This was originally an Alpha-specific thing, but it really fits here. * The i82375 PCI/EISA bridge appears as non-classified. Fix that. */ static void quirk_eisa_bridge(struct pci_dev *dev) @@ -1337,7 +1334,6 @@ static void quirk_eisa_bridge(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge); - /* * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge * is not activated. The myth is that Asus said that they do not want the @@ -1554,15 +1550,19 @@ static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev) if (likely(!asus_hides_smbus || !asus_rcba_base)) return; + /* read the Function Disable register, dword mode only */ val = readl(asus_rcba_base + 0x3418); - writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */ + + /* enable the SMBus device */ + writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); } static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev) { if (likely(!asus_hides_smbus || !asus_rcba_base)) return; + iounmap(asus_rcba_base); asus_rcba_base = NULL; pci_info(dev, "Enabled ICH6/i801 SMBus device\n"); @@ -1579,9 +1579,7 @@ DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early); -/* - * SiS 96x south bridge: BIOS typically hides SMBus device... - */ +/* SiS 96x south bridge: BIOS typically hides SMBus device... */ static void quirk_sis_96x_smbus(struct pci_dev *dev) { u8 val = 0; @@ -1604,7 +1602,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_si * ... This is further complicated by the fact that some SiS96x south * bridges pretend to be 85C503/5513 instead. In that case see if we * spotted a compatible north bridge to make sure. - * (pci_find_device doesn't work yet) + * (pci_find_device() doesn't work yet) * * We can also enable the sis96x bit in the discovery register.. */ @@ -1624,9 +1622,9 @@ static void quirk_sis_503(struct pci_dev *dev) } /* - * Ok, it now shows up as a 96x.. run the 96x quirk by - * hand in case it has already been processed. - * (depends on link order, which is apparently not guaranteed) + * Ok, it now shows up as a 96x. Run the 96x quirk by hand in case + * it has already been processed. (Depends on link order, which is + * apparently not guaranteed) */ dev->device = devid; quirk_sis_96x_smbus(dev); @@ -1634,7 +1632,6 @@ static void quirk_sis_503(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); - /* * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller * and MC97 modem controller are disabled when a second PCI soundcard is @@ -1671,9 +1668,8 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_h #if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) /* - * If we are using libata we can drive this chip properly but must - * do this early on to make the additional device appear during - * the PCI scanning. + * If we are using libata we can drive this chip properly but must do this + * early on to make the additional device appear during the PCI scanning. */ static void quirk_jmicron_ata(struct pci_dev *pdev) { @@ -1769,14 +1765,18 @@ static void quirk_alder_ioapic(struct pci_dev *pdev) if ((pdev->class >> 8) != 0xff00) return; - /* the first BAR is the location of the IO APIC...we must + /* + * The first BAR is the location of the IO-APIC... we must * not touch this (and it's already covered by the fixmap), so - * forcibly insert it into the resource tree */ + * forcibly insert it into the resource tree. + */ if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0)) insert_resource(&iomem_resource, &pdev->resource[0]); - /* The next five BARs all seem to be rubbish, so just clean - * them out */ + /* + * The next five BARs all seem to be rubbish, so just clean + * them out. + */ for (i = 1; i < 6; i++) memset(&pdev->resource[i], 0, sizeof(pdev->resource[i])); } @@ -1794,8 +1794,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quir DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_HUAWEI, 0x1610, PCI_CLASS_BRIDGE_PCI, 8, quirk_pcie_mch); /* - * It's possible for the MSI to get corrupted if shpc and acpi - * are used together on certain PXH-based systems. + * It's possible for the MSI to get corrupted if SHPC and ACPI are used + * together on certain PXH-based systems. */ static void quirk_pcie_pxh(struct pci_dev *dev) { @@ -1809,15 +1809,14 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pc DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); /* - * Some Intel PCI Express chipsets have trouble with downstream - * device power management. + * Some Intel PCI Express chipsets have trouble with downstream device + * power management. */ static void quirk_intel_pcie_pm(struct pci_dev *dev) { pci_pm_d3_delay = 120; dev->no_d1d2 = 1; } - DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm); @@ -1879,7 +1878,7 @@ static const struct dmi_system_id boot_interrupt_dmi_table[] = { /* * Boot interrupts on some chipsets cannot be turned off. For these chipsets, - * remap the original interrupt in the linux kernel to the boot interrupt, so + * remap the original interrupt in the Linux kernel to the boot interrupt, so * that a PCI device's interrupt handler is installed on the boot interrupt * line instead. */ @@ -1916,7 +1915,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk */ /* - * IO-APIC1 on 6300ESB generates boot interrupts, see intel order no + * IO-APIC1 on 6300ESB generates boot interrupts, see Intel order no * 300641-004US, section 5.7.3. */ #define INTEL_6300_IOAPIC_ABAR 0x40 @@ -1939,9 +1938,7 @@ static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); -/* - * disable boot interrupts on HT-1000 - */ +/* Disable boot interrupts on HT-1000 */ #define BC_HT1000_FEATURE_REG 0x64 #define BC_HT1000_PIC_REGS_ENABLE (1<<0) #define BC_HT1000_MAP_IDX 0xC00 @@ -1972,9 +1969,8 @@ static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); -/* - * disable boot interrupts on AMD and ATI chipsets - */ +/* Disable boot interrupts on AMD and ATI chipsets */ + /* * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131 * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode @@ -2050,7 +2046,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2, quirk_tc86c001_ide); /* - * PLX PCI 9050 PCI Target bridge controller has an errata that prevents the + * PLX PCI 9050 PCI Target bridge controller has an erratum that prevents the * local configuration registers accessible via BAR0 (memory) or BAR1 (i/o) * being read correctly if bit 7 of the base address is set. * The BAR0 or BAR1 region may be disabled (size 0) or enabled (size 128). @@ -2243,15 +2239,17 @@ static void quirk_p64h2_1k_io(struct pci_dev *dev) dev->io_window_1k = 1; } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io); -/* Under some circumstances, AER is not linked with extended capabilities. +/* + * Under some circumstances, AER is not linked with extended capabilities. * Force it to be linked by setting the corresponding control bit in the * config space. */ static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) { uint8_t b; + if (pci_read_config_byte(dev, 0xf41, &b) == 0) { if (!(b & 0x20)) { pci_write_config_byte(dev, 0xf41, b | 0x20); @@ -2281,8 +2279,10 @@ static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) PCI_DEVICE_ID_VIA_8235_USB_2, NULL); uint8_t b; - /* p should contain the first (internal) VT6212L -- see if we have - an external one by searching again */ + /* + * p should contain the first (internal) VT6212L -- see if we have + * an external one by searching again. + */ p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p); if (!p) return; @@ -2327,7 +2327,6 @@ static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev) pcie_set_readrq(dev, 2048); } } - DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5719, quirk_brcm_5719_limit_mrrs); @@ -2335,14 +2334,16 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM, #ifdef CONFIG_PCIE_IPROC_PLATFORM static void quirk_paxc_bridge(struct pci_dev *pdev) { - /* The PCI config space is shared with the PAXC root port and the first + /* + * The PCI config space is shared with the PAXC root port and the first * Ethernet device. So, we need to workaround this by telling the PCI * code that the bridge is not an Ethernet device. */ if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) pdev->class = PCI_CLASS_BRIDGE_PCI << 8; - /* MPSS is not being set properly (as it is currently 0). This is + /* + * MPSS is not being set properly (as it is currently 0). This is * because that area of the PCI config space is hard coded to zero, and * is not modifiable by firmware. Set this to 2 (e.g., 512 byte MPS) * so that the MPS can be set to the real max value. @@ -2353,10 +2354,10 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge); #endif -/* Originally in EDAC sources for i82875P: - * Intel tells BIOS developers to hide device 6 which - * configures the overflow device access containing - * the DRBs - this is where we expose device 6. +/* + * Originally in EDAC sources for i82875P: Intel tells BIOS developers to + * hide device 6 which configures the overflow device access containing the + * DRBs - this is where we expose device 6. * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm */ static void quirk_unhide_mch_dev6(struct pci_dev *dev) @@ -2368,18 +2369,18 @@ static void quirk_unhide_mch_dev6(struct pci_dev *dev) pci_write_config_byte(dev, 0xF4, reg | 0x02); } } - DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, quirk_unhide_mch_dev6); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, quirk_unhide_mch_dev6); #ifdef CONFIG_PCI_MSI -/* Some chipsets do not support MSI. We cannot easily rely on setting - * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually - * some other buses controlled by the chipset even if Linux is not - * aware of it. Instead of setting the flag on all buses in the - * machine, simply disable MSI globally. +/* + * Some chipsets do not support MSI. We cannot easily rely on setting + * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually some + * other buses controlled by the chipset even if Linux is not aware of it. + * Instead of setting the flag on all buses in the machine, simply disable + * MSI globally. */ static void quirk_disable_all_msi(struct pci_dev *dev) { @@ -2427,8 +2428,10 @@ static void quirk_amd_780_apc_msi(struct pci_dev *host_bridge) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi); -/* Go through the list of Hypertransport capabilities and - * return 1 if a HT MSI capability is found and enabled */ +/* + * Go through the list of HyperTransport capabilities and return 1 if a HT + * MSI capability is found and enabled. + */ static int msi_ht_cap_enabled(struct pci_dev *dev) { int pos, ttl = PCI_FIND_CAP_TTL; @@ -2451,7 +2454,7 @@ static int msi_ht_cap_enabled(struct pci_dev *dev) return 0; } -/* Check the hypertransport MSI mapping to know whether MSI is enabled or not */ +/* Check the HyperTransport MSI mapping to know whether MSI is enabled or not */ static void quirk_msi_ht_cap(struct pci_dev *dev) { if (dev->subordinate && !msi_ht_cap_enabled(dev)) { @@ -2462,8 +2465,9 @@ static void quirk_msi_ht_cap(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, quirk_msi_ht_cap); -/* The nVidia CK804 chipset may have 2 HT MSI mappings. - * MSI are supported if the MSI capability set in any of these mappings. +/* + * The nVidia CK804 chipset may have 2 HT MSI mappings. MSI is supported + * if the MSI capability is set in any of these mappings. */ static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) { @@ -2472,8 +2476,9 @@ static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) if (!dev->subordinate) return; - /* check HT MSI cap on this chipset and the root one. - * a single one having MSI is enough to be sure that MSI are supported. + /* + * Check HT MSI cap on this chipset and the root one. A single one + * having MSI is enough to be sure that MSI is supported. */ pdev = pci_get_slot(dev->bus, 0); if (!pdev) @@ -2510,13 +2515,13 @@ static void ht_enable_msi_mapping(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, ht_enable_msi_mapping); - DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, ht_enable_msi_mapping); -/* The P5N32-SLI motherboards from Asus have a problem with msi - * for the MCP55 NIC. It is not yet determined whether the msi problem - * also affects other devices. As for now, turn off msi for this device. +/* + * The P5N32-SLI motherboards from Asus have a problem with MSI + * for the MCP55 NIC. It is not yet determined whether the MSI problem + * also affects other devices. As for now, turn off MSI for this device. */ static void nvenet_msi_disable(struct pci_dev *dev) { @@ -2553,16 +2558,14 @@ static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev) pci_read_config_dword(dev, 0x74, &cfg); if (cfg & ((1 << 2) | (1 << 15))) { - printk(KERN_INFO "Rewriting irq routing register on MCP55\n"); + printk(KERN_INFO "Rewriting IRQ routing register on MCP55\n"); cfg &= ~((1 << 2) | (1 << 15)); pci_write_config_dword(dev, 0x74, cfg); } } - DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0, nvbridge_check_legacy_irq_routing); - DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4, nvbridge_check_legacy_irq_routing); @@ -2572,7 +2575,7 @@ static int ht_check_msi_mapping(struct pci_dev *dev) int pos, ttl = PCI_FIND_CAP_TTL; int found = 0; - /* check if there is HT MSI cap or enabled on this device */ + /* Check if there is HT MSI cap or enabled on this device */ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); while (pos && ttl--) { u8 flags; @@ -2608,7 +2611,7 @@ static int host_bridge_with_leaf(struct pci_dev *host_bridge) if (!dev) continue; - /* found next host bridge ?*/ + /* found next host bridge? */ pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); if (pos != 0) { pci_dev_put(dev); @@ -2767,27 +2770,27 @@ static void nv_msi_ht_cap_quirk_all(struct pci_dev *dev) { return __nv_msi_ht_cap_quirk(dev, 1); } +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); static void nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev) { return __nv_msi_ht_cap_quirk(dev, 0); } - DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); -DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); - static void quirk_msi_intx_disable_bug(struct pci_dev *dev) { dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; } + static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) { struct pci_dev *p; - /* SB700 MSI issue will be fixed at HW level from revision A21, + /* + * SB700 MSI issue will be fixed at HW level from revision A21; * we need check PCI REVISION ID of SMBus controller to get SB700 * revision. */ @@ -2800,6 +2803,7 @@ static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; pci_dev_put(p); } + static void quirk_msi_intx_disable_qca_bug(struct pci_dev *dev) { /* AR816X/AR817X/E210X MSI is fixed at HW level from revision 0x18 */ @@ -2869,55 +2873,56 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091, quirk_msi_intx_disable_qca_bug); #endif /* CONFIG_PCI_MSI */ -/* Allow manual resource allocation for PCI hotplug bridges - * via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For - * some PCI-PCI hotplug bridges, like PLX 6254 (former HINT HB6), - * kernel fails to allocate resources when hotplug device is - * inserted and PCI bus is rescanned. +/* + * Allow manual resource allocation for PCI hotplug bridges via + * pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For some PCI-PCI + * hotplug bridges, like PLX 6254 (former HINT HB6), kernel fails to + * allocate resources when hotplug device is inserted and PCI bus is + * rescanned. */ static void quirk_hotplug_bridge(struct pci_dev *dev) { dev->is_hotplug_bridge = 1; } - DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge); /* - * This is a quirk for the Ricoh MMC controller found as a part of - * some mulifunction chips. - + * This is a quirk for the Ricoh MMC controller found as a part of some + * multifunction chips. + * * This is very similar and based on the ricoh_mmc driver written by * Philip Langdale. Thank you for these magic sequences. * - * These chips implement the four main memory card controllers (SD, MMC, MS, xD) - * and one or both of cardbus or firewire. + * These chips implement the four main memory card controllers (SD, MMC, + * MS, xD) and one or both of CardBus or FireWire. * - * It happens that they implement SD and MMC - * support as separate controllers (and PCI functions). The linux SDHCI - * driver supports MMC cards but the chip detects MMC cards in hardware - * and directs them to the MMC controller - so the SDHCI driver never sees - * them. + * It happens that they implement SD and MMC support as separate + * controllers (and PCI functions). The Linux SDHCI driver supports MMC + * cards but the chip detects MMC cards in hardware and directs them to the + * MMC controller - so the SDHCI driver never sees them. * - * To get around this, we must disable the useless MMC controller. - * At that point, the SDHCI controller will start seeing them - * It seems to be the case that the relevant PCI registers to deactivate the - * MMC controller live on PCI function 0, which might be the cardbus controller - * or the firewire controller, depending on the particular chip in question + * To get around this, we must disable the useless MMC controller. At that + * point, the SDHCI controller will start seeing them. It seems to be the + * case that the relevant PCI registers to deactivate the MMC controller + * live on PCI function 0, which might be the CardBus controller or the + * FireWire controller, depending on the particular chip in question * * This has to be done early, because as soon as we disable the MMC controller - * other pci functions shift up one level, e.g. function #2 becomes function - * #1, and this will confuse the pci core. + * other PCI functions shift up one level, e.g. function #2 becomes function + * #1, and this will confuse the PCI core. */ - #ifdef CONFIG_MMC_RICOH_MMC static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev) { - /* disable via cardbus interface */ u8 write_enable; u8 write_target; u8 disable; - /* disable must be done via function #0 */ + /* + * Disable via CardBus interface + * + * This must be done via function #0 + */ if (PCI_FUNC(dev->devfn)) return; @@ -2933,7 +2938,7 @@ static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev) pci_write_config_byte(dev, 0x8E, write_enable); pci_write_config_byte(dev, 0x8D, write_target); - pci_notice(dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n"); + pci_notice(dev, "proprietary Ricoh MMC controller disabled (via CardBus function)\n"); pci_notice(dev, "MMC cards are now supported by standard SDHCI controller\n"); } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); @@ -2941,17 +2946,20 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) { - /* disable via firewire interface */ u8 write_enable; u8 disable; - /* disable must be done via function #0 */ + /* + * Disable via FireWire interface + * + * This must be done via function #0 + */ if (PCI_FUNC(dev->devfn)) return; /* * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize - * certain types of SD/MMC cards. Lowering the SD base - * clock frequency from 200Mhz to 50Mhz fixes this issue. + * certain types of SD/MMC cards. Lowering the SD base clock + * frequency from 200Mhz to 50Mhz fixes this issue. * * 0x150 - SD2.0 mode enable for changing base clock * frequency to 50Mhz @@ -2982,7 +2990,7 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) pci_write_config_byte(dev, 0xCB, disable | 0x02); pci_write_config_byte(dev, 0xCA, write_enable); - pci_notice(dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); + pci_notice(dev, "proprietary Ricoh MMC controller disabled (via FireWire function)\n"); pci_notice(dev, "MMC cards are now supported by standard SDHCI controller\n"); } @@ -2998,13 +3006,13 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, #define VTUNCERRMSK_REG 0x1ac #define VTD_MSK_SPEC_ERRORS (1 << 31) /* - * This is a quirk for masking vt-d spec defined errors to platform error - * handling logic. With out this, platforms using Intel 7500, 5500 chipsets + * This is a quirk for masking VT-d spec-defined errors to platform error + * handling logic. Without this, platforms using Intel 7500, 5500 chipsets * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based - * on the RAS config settings of the platform) when a vt-d fault happens. + * on the RAS config settings of the platform) when a VT-d fault happens. * The resulting SMI caused the system to hang. * - * VT-d spec related errors are already handled by the VT-d OS code, so no + * VT-d spec-related errors are already handled by the VT-d OS code, so no * need to report the same error through other channels. */ static void vtd_mask_spec_errors(struct pci_dev *dev) @@ -3030,7 +3038,8 @@ static void fixup_ti816x_class(struct pci_dev *dev) DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800, PCI_CLASS_NOT_DEFINED, 8, fixup_ti816x_class); -/* Some PCIe devices do not work reliably with the claimed maximum +/* + * Some PCIe devices do not work reliably with the claimed maximum * payload size supported. */ static void fixup_mpss_256(struct pci_dev *dev) @@ -3044,9 +3053,10 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256); -/* Intel 5000 and 5100 Memory controllers have an errata with read completion +/* + * Intel 5000 and 5100 Memory controllers have an erratum with read completion * coalescing (which is enabled by default on some BIOSes) and MPS of 256B. - * Since there is no way of knowing what the PCIE MPS on each fabric will be + * Since there is no way of knowing what the PCIe MPS on each fabric will be * until all of the devices are discovered and buses walked, read completion * coalescing must be disabled. Unfortunately, it cannot be re-enabled because * it is possible to hotplug a device with MPS of 256B. @@ -3060,9 +3070,10 @@ static void quirk_intel_mc_errata(struct pci_dev *dev) pcie_bus_config == PCIE_BUS_DEFAULT) return; - /* Intel errata specifies bits to change but does not say what they are. - * Keeping them magical until such time as the registers and values can - * be explained. + /* + * Intel erratum specifies bits to change but does not say what + * they are. Keeping them magical until such time as the registers + * and values can be explained. */ err = pci_read_config_word(dev, 0x48, &rcc); if (err) { @@ -3081,7 +3092,7 @@ static void quirk_intel_mc_errata(struct pci_dev *dev) return; } - pr_info_once("Read completion coalescing disabled due to hardware errata relating to 256B MPS\n"); + pr_info_once("Read completion coalescing disabled due to hardware erratum relating to 256B MPS\n"); } /* Intel 5000 series memory controllers and ports 2-7 */ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata); @@ -3111,11 +3122,10 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata); - /* - * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To - * work around this, query the size it should be configured to by the device and - * modify the resource end to correspond to this new size. + * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. + * To work around this, query the size it should be configured to by the + * device and modify the resource end to correspond to this new size. */ static void quirk_intel_ntb(struct pci_dev *dev) { @@ -3138,16 +3148,16 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb); /* - * Some BIOS implementations leave the Intel GPU interrupts enabled, - * even though no one is handling them (f.e. i915 driver is never loaded). - * Additionally the interrupt destination is not set up properly + * Some BIOS implementations leave the Intel GPU interrupts enabled, even + * though no one is handling them (e.g., if the i915 driver is never + * loaded). Additionally the interrupt destination is not set up properly * and the interrupt ends up -somewhere-. * - * These spurious interrupts are "sticky" and the kernel disables - * the (shared) interrupt line after 100.000+ generated interrupts. + * These spurious interrupts are "sticky" and the kernel disables the + * (shared) interrupt line after 100,000+ generated interrupts. * - * Fix it by disabling the still enabled interrupts. - * This resolves crashes often seen on monitor unplug. + * Fix it by disabling the still enabled interrupts. This resolves crashes + * often seen on monitor unplug. */ #define I915_DEIER_REG 0x4400c static void disable_igfx_irq(struct pci_dev *dev) @@ -3235,38 +3245,22 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, 0x8169, * Intel i40e (XL710/X710) 10/20/40GbE NICs all have broken INTx masking, * DisINTx can be set but the interrupt status bit is non-functional. */ -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1572, - quirk_broken_intx_masking); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1574, - quirk_broken_intx_masking); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1580, - quirk_broken_intx_masking); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1581, - quirk_broken_intx_masking); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1583, - quirk_broken_intx_masking); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1584, - quirk_broken_intx_masking); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1585, - quirk_broken_intx_masking); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1586, - quirk_broken_intx_masking); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1587, - quirk_broken_intx_masking); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1588, - quirk_broken_intx_masking); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1589, - quirk_broken_intx_masking); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x158a, - quirk_broken_intx_masking); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x158b, - quirk_broken_intx_masking); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d0, - quirk_broken_intx_masking); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d1, - quirk_broken_intx_masking); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d2, - quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1572, quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1574, quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1580, quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1581, quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1583, quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1584, quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1585, quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1586, quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1587, quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1588, quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1589, quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x158a, quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x158b, quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d0, quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d1, quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d2, quirk_broken_intx_masking); static u16 mellanox_broken_intx_devs[] = { PCI_DEVICE_ID_MELLANOX_HERMON_SDR, @@ -3311,7 +3305,8 @@ static void mellanox_check_broken_intx_masking(struct pci_dev *pdev) } } - /* Getting here means Connect-IB cards and up. Connect-IB has no INTx + /* + * Getting here means Connect-IB cards and up. Connect-IB has no INTx * support so shouldn't be checked further */ if (pdev->device == PCI_DEVICE_ID_MELLANOX_CONNECTIB) @@ -3431,8 +3426,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PORT_RIDGE, * shutdown before suspend. Otherwise the native host interface (NHI) will not * be present after resume if a device was plugged in before suspend. * - * The thunderbolt controller consists of a pcie switch with downstream - * bridges leading to the NHI and to the tunnel pci bridges. + * The Thunderbolt controller consists of a PCIe switch with downstream + * bridges leading to the NHI and to the tunnel PCI bridges. * * This quirk cuts power to the whole chip. Therefore we have to apply it * during suspend_noirq of the upstream bridge. @@ -3450,17 +3445,19 @@ static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev) bridge = ACPI_HANDLE(&dev->dev); if (!bridge) return; + /* * SXIO and SXLV are present only on machines requiring this quirk. - * TB bridges in external devices might have the same device id as those - * on the host, but they will not have the associated ACPI methods. This - * implicitly checks that we are at the right bridge. + * Thunderbolt bridges in external devices might have the same + * device ID as those on the host, but they will not have the + * associated ACPI methods. This implicitly checks that we are at + * the right bridge. */ if (ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXIO", &SXIO)) || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXFP", &SXFP)) || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXLV", &SXLV))) return; - pci_info(dev, "quirk: cutting power to thunderbolt controller...\n"); + pci_info(dev, "quirk: cutting power to Thunderbolt controller...\n"); /* magic sequence */ acpi_execute_simple_method(SXIO, NULL, 1); @@ -3475,9 +3472,9 @@ DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL, quirk_apple_poweroff_thunderbolt); /* - * Apple: Wait for the thunderbolt controller to reestablish pci tunnels. + * Apple: Wait for the Thunderbolt controller to reestablish PCI tunnels * - * During suspend the thunderbolt controller is reset and all pci + * During suspend the Thunderbolt controller is reset and all PCI * tunnels are lost. The NHI driver will try to reestablish all tunnels * during resume. We have to manually wait for the NHI since there is * no parent child relationship between the NHI and the tunneled @@ -3492,9 +3489,10 @@ static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev) return; if (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM) return; + /* - * Find the NHI and confirm that we are a bridge on the tb host - * controller and not on a tb endpoint. + * Find the NHI and confirm that we are a bridge on the Thunderbolt + * host controller and not on a Thunderbolt endpoint. */ sibling = pci_get_slot(dev->bus, 0x0); if (sibling == dev) @@ -3511,7 +3509,7 @@ static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev) nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI) || nhi->class != PCI_CLASS_SYSTEM_OTHER << 8) goto out; - pci_info(dev, "quirk: waiting for thunderbolt to reestablish PCI tunnels...\n"); + pci_info(dev, "quirk: waiting for Thunderbolt to reestablish PCI tunnels...\n"); device_pm_wait_for_dev(&dev->dev, &nhi->dev); out: pci_dev_put(nhi); @@ -3600,9 +3598,7 @@ reset_complete: return 0; } -/* - * Device-specific reset method for Chelsio T4-based adapters. - */ +/* Device-specific reset method for Chelsio T4-based adapters */ static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe) { u16 old_command; @@ -3885,7 +3881,7 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6869, PCI_CLASS_NOT_DEFINED, 8, /* * Some devices have problems with Transaction Layer Packets with the Relaxed * Ordering Attribute set. Such devices should mark themselves and other - * Device Drivers should check before sending TLPs with RO set. + * device drivers should check before sending TLPs with RO set. */ static void quirk_relaxedordering_disable(struct pci_dev *dev) { @@ -3895,7 +3891,7 @@ static void quirk_relaxedordering_disable(struct pci_dev *dev) /* * Intel Xeon processors based on Broadwell/Haswell microarchitecture Root - * Complex has a Flow Control Credit issue which can cause performance + * Complex have a Flow Control Credit issue which can cause performance * problems with Upstream Transaction Layer Packets with Relaxed Ordering set. */ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f01, PCI_CLASS_NOT_DEFINED, 8, @@ -3956,7 +3952,7 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0e, PCI_CLASS_NOT_DEFINED quirk_relaxedordering_disable); /* - * The AMD ARM A1100 (AKA "SEATTLE") SoC has a bug in its PCIe Root Complex + * The AMD ARM A1100 (aka "SEATTLE") SoC has a bug in its PCIe Root Complex * where Upstream Transaction Layer Packets with the Relaxed Ordering * Attribute clear are allowed to bypass earlier TLPs with Relaxed Ordering * set. This is a violation of the PCIe 3.0 Transaction Ordering Rules @@ -4020,7 +4016,7 @@ static void quirk_chelsio_T5_disable_root_port_attributes(struct pci_dev *pdev) * This mask/compare operation selects for Physical Function 4 on a * T5. We only need to fix up the Root Port once for any of the * PFs. PF[0..3] have PCI Device IDs of 0x50xx, but PF4 is uniquely - * 0x54xx so we use that one, + * 0x54xx so we use that one. */ if ((pdev->device & 0xff00) == 0x5400) quirk_disable_root_port_attributes(pdev); @@ -4111,7 +4107,7 @@ static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags) static int pci_quirk_xgene_acs(struct pci_dev *dev, u16 acs_flags) { /* - * X-Gene root matching this quirk do not allow peer-to-peer + * X-Gene Root Ports matching this quirk do not allow peer-to-peer * transactions with others, allowing masking out these bits as if they * were unimplemented in the ACS capability. */ @@ -4434,7 +4430,7 @@ static int pci_quirk_enable_intel_lpc_acs(struct pci_dev *dev) /* * Read the RCBA register from the LPC (D31:F0). PCH root ports * are D28:F* and therefore get probed before LPC, thus we can't - * use pci_get_slot/pci_read_config_dword here. + * use pci_get_slot()/pci_read_config_dword() here. */ pci_bus_read_config_dword(dev->bus, PCI_DEVFN(31, 0), INTEL_LPC_RCBA_REG, &rcba); @@ -4567,7 +4563,7 @@ int pci_dev_specific_enable_acs(struct pci_dev *dev) } /* - * The PCI capabilities list for Intel DH895xCC VFs (device id 0x0443) with + * The PCI capabilities list for Intel DH895xCC VFs (device ID 0x0443) with * QuickAssist Technology (QAT) is prematurely terminated in hardware. The * Next Capability pointer in the MSI Capability Structure should point to * the PCIe Capability Structure but is incorrectly hardwired as 0 terminating @@ -4628,9 +4624,7 @@ static void quirk_intel_qat_vf_cap(struct pci_dev *pdev) if (pci_find_saved_cap(pdev, PCI_CAP_ID_EXP)) return; - /* - * Save PCIE cap - */ + /* Save PCIe cap */ state = kzalloc(sizeof(*state) + size, GFP_KERNEL); if (!state) return; @@ -4651,7 +4645,7 @@ static void quirk_intel_qat_vf_cap(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, quirk_intel_qat_vf_cap); -/* FLR may cause some 82579 devices to hang. */ +/* FLR may cause some 82579 devices to hang */ static void quirk_intel_no_flr(struct pci_dev *dev) { dev->dev_flags |= PCI_DEV_FLAGS_NO_FLR_RESET; |