diff options
author | balrog <balrog@c046a42c-6fe2-441c-8c8c-71466251a162> | 2008-06-09 00:03:13 +0000 |
---|---|---|
committer | balrog <balrog@c046a42c-6fe2-441c-8c8c-71466251a162> | 2008-06-09 00:03:13 +0000 |
commit | 88d2c950b002a3976cd5673b0214006e72cae191 (patch) | |
tree | a165d43e40fa2d6d98fe9e9139cd809f13f5b426 /hw/tc6393xb.c | |
parent | c8256f9d23bba4fac3b0b6a9e6e3dc12362cbe0b (diff) |
TC6393XB system features (Dmitry Baryshkov).
Add basic support for TC6393XB system features. No support for GPIO
input though.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4702 c046a42c-6fe2-441c-8c8c-71466251a162
Diffstat (limited to 'hw/tc6393xb.c')
-rw-r--r-- | hw/tc6393xb.c | 291 |
1 files changed, 291 insertions, 0 deletions
diff --git a/hw/tc6393xb.c b/hw/tc6393xb.c new file mode 100644 index 000000000..189369467 --- /dev/null +++ b/hw/tc6393xb.c @@ -0,0 +1,291 @@ +/* vim:set shiftwidth=4 ts=4 et: */ +#include "hw.h" +#include "pxa.h" +#include "devices.h" + +#define TC6393XB_GPIOS 16 + +#define SCR_REVID 0x08 /* b Revision ID */ +#define SCR_ISR 0x50 /* b Interrupt Status */ +#define SCR_IMR 0x52 /* b Interrupt Mask */ +#define SCR_IRR 0x54 /* b Interrupt Routing */ +#define SCR_GPER 0x60 /* w GP Enable */ +#define SCR_GPI_SR(i) (0x64 + (i)) /* b3 GPI Status */ +#define SCR_GPI_IMR(i) (0x68 + (i)) /* b3 GPI INT Mask */ +#define SCR_GPI_EDER(i) (0x6c + (i)) /* b3 GPI Edge Detect Enable */ +#define SCR_GPI_LIR(i) (0x70 + (i)) /* b3 GPI Level Invert */ +#define SCR_GPO_DSR(i) (0x78 + (i)) /* b3 GPO Data Set */ +#define SCR_GPO_DOECR(i) (0x7c + (i)) /* b3 GPO Data OE Control */ +#define SCR_GP_IARCR(i) (0x80 + (i)) /* b3 GP Internal Active Register Control */ +#define SCR_GP_IARLCR(i) (0x84 + (i)) /* b3 GP INTERNAL Active Register Level Control */ +#define SCR_GPI_BCR(i) (0x88 + (i)) /* b3 GPI Buffer Control */ +#define SCR_GPA_IARCR 0x8c /* w GPa Internal Active Register Control */ +#define SCR_GPA_IARLCR 0x90 /* w GPa Internal Active Register Level Control */ +#define SCR_GPA_BCR 0x94 /* w GPa Buffer Control */ +#define SCR_CCR 0x98 /* w Clock Control */ +#define SCR_PLL2CR 0x9a /* w PLL2 Control */ +#define SCR_PLL1CR 0x9c /* l PLL1 Control */ +#define SCR_DIARCR 0xa0 /* b Device Internal Active Register Control */ +#define SCR_DBOCR 0xa1 /* b Device Buffer Off Control */ +#define SCR_FER 0xe0 /* b Function Enable */ +#define SCR_MCR 0xe4 /* w Mode Control */ +#define SCR_CONFIG 0xfc /* b Configuration Control */ +#define SCR_DEBUG 0xff /* b Debug */ + +struct tc6393xb_s { + target_phys_addr_t target_base; + struct { + uint8_t ISR; + uint8_t IMR; + uint8_t IRR; + uint16_t GPER; + uint8_t GPI_SR[3]; + uint8_t GPI_IMR[3]; + uint8_t GPI_EDER[3]; + uint8_t GPI_LIR[3]; + uint8_t GP_IARCR[3]; + uint8_t GP_IARLCR[3]; + uint8_t GPI_BCR[3]; + uint16_t GPA_IARCR; + uint16_t GPA_IARLCR; + uint16_t CCR; + uint16_t PLL2CR; + uint32_t PLL1CR; + uint8_t DIARCR; + uint8_t DBOCR; + uint8_t FER; + uint16_t MCR; + uint8_t CONFIG; + uint8_t DEBUG; + } scr; + uint32_t gpio_dir; + uint32_t gpio_level; + uint32_t prev_level; + qemu_irq handler[TC6393XB_GPIOS]; + qemu_irq *gpio_in; +}; + +qemu_irq *tc6393xb_gpio_in_get(struct tc6393xb_s *s) +{ + return s->gpio_in; +} + +static void tc6393xb_gpio_set(void *opaque, int line, int level) +{ +// struct tc6393xb_s *s = opaque; + + if (line > TC6393XB_GPIOS) { + printf("%s: No GPIO pin %i\n", __FUNCTION__, line); + return; + } + + // FIXME: how does the chip reflect the GPIO input level change? +} + +void tc6393xb_gpio_out_set(struct tc6393xb_s *s, int line, + qemu_irq handler) +{ + if (line >= TC6393XB_GPIOS) { + fprintf(stderr, "TC6393xb: no GPIO pin %d\n", line); + return; + } + + s->handler[line] = handler; +} + +static void tc6393xb_gpio_handler_update(struct tc6393xb_s *s) +{ + uint32_t level, diff; + int bit; + + level = s->gpio_level & s->gpio_dir; + + for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) { + bit = ffs(diff) - 1; + qemu_set_irq(s->handler[bit], (level >> bit) & 1); + } + + s->prev_level = level; +} + +#define SCR_REG_B(N) \ + case SCR_ ##N: return s->scr.N +#define SCR_REG_W(N) \ + case SCR_ ##N: return s->scr.N; \ + case SCR_ ##N + 1: return s->scr.N >> 8; +#define SCR_REG_L(N) \ + case SCR_ ##N: return s->scr.N; \ + case SCR_ ##N + 1: return s->scr.N >> 8; \ + case SCR_ ##N + 2: return s->scr.N >> 16; \ + case SCR_ ##N + 3: return s->scr.N >> 24; +#define SCR_REG_A(N) \ + case SCR_ ##N(0): return s->scr.N[0]; \ + case SCR_ ##N(1): return s->scr.N[1]; \ + case SCR_ ##N(2): return s->scr.N[2] + +static uint32_t tc6393xb_readb(void *opaque, target_phys_addr_t addr) +{ + struct tc6393xb_s *s = opaque; + addr -= s->target_base; + switch (addr) { + case SCR_REVID: + return 3; + case SCR_REVID+1: + return 0; + SCR_REG_B(ISR); + SCR_REG_B(IMR); + SCR_REG_B(IRR); + SCR_REG_W(GPER); + SCR_REG_A(GPI_SR); + SCR_REG_A(GPI_IMR); + SCR_REG_A(GPI_EDER); + SCR_REG_A(GPI_LIR); + case SCR_GPO_DSR(0): + case SCR_GPO_DSR(1): + case SCR_GPO_DSR(2): + return (s->gpio_level >> ((addr - SCR_GPO_DSR(0)) * 8)) & 0xff; + case SCR_GPO_DOECR(0): + case SCR_GPO_DOECR(1): + case SCR_GPO_DOECR(2): + return (s->gpio_dir >> ((addr - SCR_GPO_DOECR(0)) * 8)) & 0xff; + SCR_REG_A(GP_IARCR); + SCR_REG_A(GP_IARLCR); + SCR_REG_A(GPI_BCR); + SCR_REG_W(GPA_IARCR); + SCR_REG_W(GPA_IARLCR); + SCR_REG_W(CCR); + SCR_REG_W(PLL2CR); + SCR_REG_L(PLL1CR); + SCR_REG_B(DIARCR); + SCR_REG_B(DBOCR); + SCR_REG_B(FER); + SCR_REG_W(MCR); + SCR_REG_B(CONFIG); + SCR_REG_B(DEBUG); + } + fprintf(stderr, "tc6393xb: unhandled read at %08x\n", (uint32_t) addr); + return 0; +} +#undef SCR_REG_B +#undef SCR_REG_W +#undef SCR_REG_L +#undef SCR_REG_A + +#define SCR_REG_B(N) \ + case SCR_ ##N: s->scr.N = value; break; +#define SCR_REG_W(N) \ + case SCR_ ##N: s->scr.N = (s->scr.N & ~0xff) | (value & 0xff); break; \ + case SCR_ ##N + 1: s->scr.N = (s->scr.N & 0xff) | (value << 8); break +#define SCR_REG_L(N) \ + case SCR_ ##N: s->scr.N = (s->scr.N & ~0xff) | (value & 0xff); break; \ + case SCR_ ##N + 1: s->scr.N = (s->scr.N & ~(0xff << 8)) | (value & (0xff << 8)); break; \ + case SCR_ ##N + 2: s->scr.N = (s->scr.N & ~(0xff << 16)) | (value & (0xff << 16)); break; \ + case SCR_ ##N + 3: s->scr.N = (s->scr.N & ~(0xff << 24)) | (value & (0xff << 24)); break; +#define SCR_REG_A(N) \ + case SCR_ ##N(0): s->scr.N[0] = value; break; \ + case SCR_ ##N(1): s->scr.N[1] = value; break; \ + case SCR_ ##N(2): s->scr.N[2] = value; break + +static void tc6393xb_writeb(void *opaque, target_phys_addr_t addr, uint32_t value) +{ + struct tc6393xb_s *s = opaque; + addr -= s->target_base; + switch (addr) { + SCR_REG_B(ISR); + SCR_REG_B(IMR); + SCR_REG_B(IRR); + SCR_REG_W(GPER); + SCR_REG_A(GPI_SR); + SCR_REG_A(GPI_IMR); + SCR_REG_A(GPI_EDER); + SCR_REG_A(GPI_LIR); + case SCR_GPO_DSR(0): + case SCR_GPO_DSR(1): + case SCR_GPO_DSR(2): + s->gpio_level = (s->gpio_level & ~(0xff << ((addr - SCR_GPO_DSR(0))*8))) | ((value & 0xff) << ((addr - SCR_GPO_DSR(0))*8)); + tc6393xb_gpio_handler_update(s); + break; + case SCR_GPO_DOECR(0): + case SCR_GPO_DOECR(1): + case SCR_GPO_DOECR(2): + s->gpio_dir = (s->gpio_dir & ~(0xff << ((addr - SCR_GPO_DOECR(0))*8))) | ((value & 0xff) << ((addr - SCR_GPO_DOECR(0))*8)); + tc6393xb_gpio_handler_update(s); + break; + SCR_REG_A(GP_IARCR); + SCR_REG_A(GP_IARLCR); + SCR_REG_A(GPI_BCR); + SCR_REG_W(GPA_IARCR); + SCR_REG_W(GPA_IARLCR); + SCR_REG_W(CCR); + SCR_REG_W(PLL2CR); + SCR_REG_L(PLL1CR); + SCR_REG_B(DIARCR); + SCR_REG_B(DBOCR); + SCR_REG_B(FER); + SCR_REG_W(MCR); + SCR_REG_B(CONFIG); + SCR_REG_B(DEBUG); + default: + fprintf(stderr, "tc6393xb: unhandled write at %08x: %02x\n", + (uint32_t) addr, value & 0xff); + break; + } +} +#undef SCR_REG_B +#undef SCR_REG_W +#undef SCR_REG_L +#undef SCR_REG_A + +static uint32_t tc6393xb_readw(void *opaque, target_phys_addr_t addr) +{ + return (tc6393xb_readb(opaque, addr) & 0xff) | + (tc6393xb_readb(opaque, addr + 1) << 8); +} + +static uint32_t tc6393xb_readl(void *opaque, target_phys_addr_t addr) +{ + return (tc6393xb_readb(opaque, addr) & 0xff) | + ((tc6393xb_readb(opaque, addr + 1) & 0xff) << 8) | + ((tc6393xb_readb(opaque, addr + 2) & 0xff) << 16) | + ((tc6393xb_readb(opaque, addr + 3) & 0xff) << 24); +} + +static void tc6393xb_writew(void *opaque, target_phys_addr_t addr, uint32_t value) +{ + tc6393xb_writeb(opaque, addr, value); + tc6393xb_writeb(opaque, addr + 1, value >> 8); +} + +static void tc6393xb_writel(void *opaque, target_phys_addr_t addr, uint32_t value) +{ + tc6393xb_writeb(opaque, addr, value); + tc6393xb_writeb(opaque, addr + 1, value >> 8); + tc6393xb_writeb(opaque, addr + 2, value >> 16); + tc6393xb_writeb(opaque, addr + 3, value >> 24); +} + +struct tc6393xb_s *tc6393xb_init(uint32_t base, qemu_irq irq) +{ + int iomemtype; + struct tc6393xb_s *s; + CPUReadMemoryFunc *tc6393xb_readfn[] = { + tc6393xb_readb, + tc6393xb_readw, + tc6393xb_readl, + }; + CPUWriteMemoryFunc *tc6393xb_writefn[] = { + tc6393xb_writeb, + tc6393xb_writew, + tc6393xb_writel, + }; + + s = (struct tc6393xb_s *) qemu_mallocz(sizeof(struct tc6393xb_s)); + s->target_base = base; + s->gpio_in = qemu_allocate_irqs(tc6393xb_gpio_set, s, TC6393XB_GPIOS); + + iomemtype = cpu_register_io_memory(0, tc6393xb_readfn, + tc6393xb_writefn, s); + cpu_register_physical_memory(s->target_base, 0x200000, iomemtype); + + return s; +} |