summaryrefslogtreecommitdiff
path: root/drivers/lguest
AgeCommit message (Collapse)AuthorFilesLines
2012-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1958 commits) net: pack skb_shared_info more efficiently net_sched: red: split red_parms into parms and vars net_sched: sfq: extend limits cnic: Improve error recovery on bnx2x devices cnic: Re-init dev->stats_addr after chip reset net_sched: Bug in netem reordering bna: fix sparse warnings/errors bna: make ethtool_ops and strings const xgmac: cleanups net: make ethtool_ops const vmxnet3" make ethtool ops const xen-netback: make ops structs const virtio_net: Pass gfp flags when allocating rx buffers. ixgbe: FCoE: Add support for ndo_get_fcoe_hbainfo() call netdev: FCoE: Add new ndo_get_fcoe_hbainfo() call igb: reset PHY after recovering from PHY power down igb: add basic runtime PM support igb: Add support for byte queue limits. e1000: cleanup CE4100 MDIO registers access e1000: unmap ce4100_gbe_mdio_base_virt in e1000_remove ...
2011-12-06x86: Fix rflags in FAKE_STACK_FRAMESeiichi Ikarashi1-1/+1
The x86_64 kernel pushes the fake kernel stack in arch/x86/kernel/entry_64.S:FAKE_STACK_FRAME, and rflags register in it does not conform to the specification. Although Intel's manual[1] says bit 1 of it shall be set to 1, this bit is cleared to 0 on pushing the fake stack. [1] Intel(R) 64 and IA-32 Architectures Software Developer's Manual Vol.1 3-21 Figure 3-8. EFLAGS Register If it is not on purpose, it is better to be fixed, because it can lead some tools misunderstanding the stack frame. For example, "crash" utility[2] actually detects it and warns you like below: RIP: ffffffff8005dfa2 RSP: ffff8104ce0c7f58 RFLAGS: 00000200 [...] bt: WARNING: possibly bogus exception frame Signed-off-by: Seiichi Ikarashi <s.ikarashi@jp.fujitsu.com> Tested-by: Masayoshi MIZUMA <m.mizuma@jp.fujitsu.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-16enable virtio_net to return bus_info in ethtool -i consistent with emulated NICsRick Jones1-0/+6
Add a new .bus_name to virtio_config_ops then modify virtio_net to call through to it in an ethtool .get_drvinfo routine to report bus_info in ethtool -i output which is consistent with other emulated NICs and the output of lspci. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-31lguest: add export.h to lguest files for THIS_MODULE/EXPORT_SYMBOLPaul Gortmaker2-0/+2
We need this in advance of the module.h cleanup, or we'll get compile errors like this: CC drivers/lguest/lguest_device.o drivers/lguest/lguest_device.c: In function ‘lguest_devices_init’: drivers/lguest/lguest_device.c:490: error: ‘THIS_MODULE’ undeclared (first use in this function) Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-27lguest: move process freezing before pending signals checkMichal Hocko1-7/+7
run_guest tries to freeze the current process after it has handled pending interrupts and before it calls lguest_arch_run_guest. This doesn't work nicely if the task has been killed while being frozen and when we want to handle that signal as soon as possible. Let's move try_to_freeze before we check for pending signal so that we can get out of the loop as soon as possible. Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-10-27lguest: Allow running under paravirt-enabled KVM.Rusty Russell1-1/+1
We actually can run under KVM, as it doesn't paravirtualize anything we need to use; reduce the check to checking we are the normal ringlevel. Reported-by: Stefanos Geraggelos <sgerag@cslab.ece.ntua.gr> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au># HG changeset patch
2011-07-22lguest: Fix in/out emulationRusty Russell1-9/+11
We were blatting too much of the register. Linux didn't care, but in theory it might. Reported-by: Jonas Maebe <jonas.maebe@elis.ugent.be> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-22lguest: update commentsRusty Russell5-18/+19
Also removes a long-unused #define and an extraneous semicolon. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-22lguest: Simplify device initialization.Rusty Russell1-15/+22
We used to notify the Host every time we updated a device's status. However, it only really needs to know when we're resetting the device, or failed to initialize it, or when we've finished our feature negotiation. In particular, we used to wait for VIRTIO_CONFIG_S_DRIVER_OK in the status byte before starting the device service threads. But this corresponds to the successful finish of device initialization, which might (like virtio_blk's partition scanning) use the device. So we had a hack, if they used the device before we expected we started the threads anyway. Now we hook into the finalize_features hook in the Guest: at that point we tell the Launcher that it can rely on the features we have acked. On the Launcher side, we look at the status at that point, and start servicing the device. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-22lguest: don't rewrite vmcall instructionsRusty Russell2-81/+2
Now we no longer use vmcall, we don't need to rewrite it in the Guest. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-22lguest: use a special 1:1 linear pagetable mode until first switch.Rusty Russell2-194/+86
The Host used to create some page tables for the Guest to use at the top of Guest memory; it would then tell the Guest where this was. In particular, it created linear mappings for 0 and 0xC0000000 addresses because lguest used to switch to its real page tables quite late in boot. However, since d50d8fe19 Linux initialized boot page tables in head_32.S even before the "are we lguest?" boot jump. So, now we can simplify things: the Host pagetable code assumes 1:1 linear mapping until it first calls the LHCALL_NEW_PGTABLE hypercall, which we now do before we reach C code. This also means that the Host doesn't need to know anything about the Guest's PAGE_OFFSET. (Non-Linux guests might not even have such a thing). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-05-06Correct occurrences ofRob Landley2-3/+5
- Documentation/kvm/ to Documentation/virtual/kvm - Documentation/uml/ to Documentation/virtual/uml - Documentation/lguest/ to Documentation/virtual/lguest throughout the kernel source tree. Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-01-20lguest: compile fixesRusty Russell1-1/+1
arch/x86/lguest/boot.c: In function ‘lguest_init_IRQ’: arch/x86/lguest/boot.c:824: error: macro "__this_cpu_write" requires 2 arguments, but only 1 given arch/x86/lguest/boot.c:824: error: ‘__this_cpu_write’ undeclared (first use in this function) arch/x86/lguest/boot.c:824: error: (Each undeclared identifier is reported only once arch/x86/lguest/boot.c:824: error: for each function it appears in.) drivers/lguest/x86/core.c: In function ‘copy_in_guest_info’: drivers/lguest/x86/core.c:94: error: lvalue required as left operand of assignment Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-01-20lguest: Use this_cpu_opsChristoph Lameter2-3/+3
Use this_cpu_ops in a couple of places in lguest. Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann1-0/+1
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-04-14lguest: stop using KVM hypercall mechanismRusty Russell1-2/+2
This is a partial revert of 4cd8b5e2a159 "lguest: use KVM hypercalls"; we revert to using (just as questionable but more reliable) int $15 for hypercalls. I didn't revert the register mapping, so we still use the same calling convention as kvm. KVM in more recent incarnations stopped injecting a fault when a guest tried to use the VMCALL instruction from ring 1, so lguest under kvm fails to make hypercalls. It was nice to share code with our KVM cousins, but this was overreach. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Matias Zabaljauregui <zabaljauregui@gmail.com> Cc: Avi Kivity <avi@redhat.com>
2010-04-14lguest: workaround cmpxchg8b_emu by ignoring cli in the guest.Rusty Russell1-0/+12
It's only used by cmpxchg8b_emu (see db677ffa5f5a for the gory details), and fixing that to be paravirt aware would be more work than simply ignoring it (and AFAICT only help lguest). This makes lguest work on machines which have cmpxchg8b, for kernels compiled for older processors. (We can't emulate it properly: the popf which expects to restore interrupts does not trap). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: virtualization@lists.osdl.org
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo5-0/+5
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-01-04lguest: fix bug in setting guest GDT entryRusty Russell1-1/+3
We kill the guest, but then we blatt random stuff. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14Merge branch 'for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits) m68k: rename global variable vmalloc_end to m68k_vmalloc_end percpu: add missing per_cpu_ptr_to_phys() definition for UP percpu: Fix kdump failure if booted with percpu_alloc=page percpu: make misc percpu symbols unique percpu: make percpu symbols in ia64 unique percpu: make percpu symbols in powerpc unique percpu: make percpu symbols in x86 unique percpu: make percpu symbols in xen unique percpu: make percpu symbols in cpufreq unique percpu: make percpu symbols in oprofile unique percpu: make percpu symbols in tracer unique percpu: make percpu symbols under kernel/ and mm/ unique percpu: remove some sparse warnings percpu: make alloc_percpu() handle array types vmalloc: fix use of non-existent percpu variable in put_cpu_var() this_cpu: Use this_cpu_xx in trace_functions_graph.c this_cpu: Use this_cpu_xx for ftrace this_cpu: Use this_cpu_xx in nmi handling this_cpu: Use this_cpu operations in RCU this_cpu: Use this_cpu ops for VM statistics ... Fix up trivial (famous last words) global per-cpu naming conflicts in arch/x86/kvm/svm.c mm/slab.c
2009-10-29percpu: make misc percpu symbols uniqueTejun Heo1-3/+3
This patch updates misc percpu related symbols such that percpu symbols are unique and don't clash with local symbols. This serves two purposes of decreasing the possibility of global percpu symbol collision and allowing dropping per_cpu__ prefix from percpu symbols. * drivers/crypto/padlock-aes.c: s/last_cword/paes_last_cword/ * drivers/lguest/x86/core.c: s/last_cpu/lg_last_cpu/ * drivers/s390/net/netiucv.c: rename the variable used in a macro to avoid clashing with percpu symbol * arch/mn10300/kernel/kprobes.c: replace current_ prefix with cur_ for static variables. Please note that percpu symbol current_kprobe can't be changed as it's used by generic code. Partly based on Rusty Russell's "alloc_percpu: rename percpu vars which cause name clashes" patch. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com
2009-10-11headers: remove sched.h from interrupt.hAlexey Dobriyan1-0/+1
After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-10-01const: constify remaining file_operationsAlexey Dobriyan1-1/+1
[akpm@linux-foundation.org: fix KVM] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds2-29/+21
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: don't force VIRTIO_F_NOTIFY_ON_EMPTY lguest: cleanup for map_switcher() lguest: use PGDIR_SHIFT for PAE code to allow different PAGE_OFFSET lguest: use set_pte/set_pmd uniformly for real page table entries lguest: move panic notifier registration to its expected place. virtio_blk: add support for cache flush virtio: add virtio IDs file virtio: get rid of redundant VIRTIO_ID_9P definition virtio: make add_buf return capacity remaining virtio_pci: minor MSI-X cleanups
2009-09-23lguest: cleanup for map_switcher()Xiao Guangrong1-3/+2
We can use alloc_page() instead of get_zeroed_page() and virt_to_page() Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-09-23lguest: use PGDIR_SHIFT for PAE code to allow different PAGE_OFFSETRusty Russell1-4/+2
We still assume the Guest and Host have the same PAGE_OFFSET settings, but now we don't assume 0xC0000000. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Matias Zabaljauregui <zabaljauregui@gmail.com>
2009-09-23lguest: use set_pte/set_pmd uniformly for real page table entriesRusty Russell1-22/+17
If we're building a pte, we can use simple assigment; only use set_pte etc. when we're actually going to use that destination as a PTE. I don't know that we'll ever run under Xen, but it's neater. And use set_pte/set_pmd rather than assuming native_ versions, even though that's probably true for most people. (Includes compile fix by Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Matias Zabaljauregui <zabaljauregui@gmail.com> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
2009-09-21trivial: fix typo "to to" in multiple filesAnand Gadiyar1-1/+1
Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-30lguest and virtio: cleanup struct definitions to Linux style.Rusty Russell2-8/+4
I've been doing this for years, and akpm picked me up on it about 12 months ago. lguest partly serves as example code, so let's do it Right. Also, remove two unused fields in struct vblk_info in the example launcher. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@redhat.com>
2009-07-30lguest: update commentryRusty Russell7-40/+176
Every so often, after code shuffles, I need to go through and unbitrot the Lguest Journey (see drivers/lguest/README). Since we now use RCU in a simple form in one place I took the opportunity to expand that explanation. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
2009-07-30lguest: fix comment styleRusty Russell10-608/+1168
I don't really notice it (except to begrudge the extra vertical space), but Ingo does. And he pointed out that one excuse of lguest is as a teaching tool, it should set a good example. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@redhat.com>
2009-07-30lguest: dereferencing freed mem in add_eventfd()Dan Carpenter1-2/+3
"new" was freed and then dereferenced. Also the return value wasn't being used so I modified the caller as well. Compile tested only. Found by smatch (http://repo.or.cz/w/smatch.git). regards, dan carpenter Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-07-17lguest: remove unnecessary forward struct declarationDavide Libenzi1-2/+0
While fixing lg.h to drop the fwd declaration, I noticed there's another one ;) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-30eventfd: revised interface and cleanupsDavide Libenzi2-3/+3
Change the eventfd interface to de-couple the eventfd memory context, from the file pointer instance. Without such change, there is no clean way to racely free handle the POLLHUP event sent when the last instance of the file* goes away. Also, now the internal eventfd APIs are using the eventfd context instead of the file*. This patch is required by KVM's IRQfd code, which is still under development. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Gregory Haskins <ghaskins@novell.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguestLinus Torvalds8-125/+531
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: (31 commits) lguest: add support for indirect ring entries lguest: suppress notifications in example Launcher lguest: try to batch interrupts on network receive lguest: avoid sending interrupts to Guest when no activity occurs. lguest: implement deferred interrupts in example Launcher lguest: remove obsolete LHREQ_BREAK call lguest: have example Launcher service all devices in separate threads lguest: use eventfds for device notification eventfd: export eventfd_signal and eventfd_fget for lguest lguest: allow any process to send interrupts lguest: PAE fixes lguest: PAE support lguest: Add support for kvm_hypercall4() lguest: replace hypercall name LHCALL_SET_PMD with LHCALL_SET_PGD lguest: use native_set_* macros, which properly handle 64-bit entries when PAE is activated lguest: map switcher with executable page table entries lguest: fix writev returning short on console output lguest: clean up length-used value in example launcher lguest: Segment selectors are 16-bit long. Fix lg_cpu.ss1 definition. lguest: beyond ARRAY_SIZE of cpu->arch.gdt ...
2009-06-12lguest: remove obsolete LHREQ_BREAK callRusty Russell3-42/+4
We no longer need an efficient mechanism to force the Guest back into host userspace, as each device is serviced without bothering the main Guest process (aka. the Launcher). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: use eventfds for device notificationRusty Russell4-6/+115
Currently, when a Guest wants to perform I/O it calls LHCALL_NOTIFY with an address: the main Launcher process returns with this address, and figures out what device to run. A far nicer model is to let processes bind an eventfd to an address: if we find one, we simply signal the eventfd. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Davide Libenzi <davidel@xmailserver.org>
2009-06-12lguest: allow any process to send interruptsRusty Russell3-12/+18
We currently only allow the Launcher process to send interrupts, but it as we already send interrupts from the hrtimer, it's a simple matter of extracting that code into a common set_interrupt routine. As we switch to a thread per virtqueue, this avoids a bottleneck through the main Launcher process. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: PAE fixesRusty Russell1-17/+21
1) j wasn't initialized in setup_pagetables, so they weren't set up for me causing immediate guest crashes. 2) gpte_addr should not re-read the pmd from the Guest. Especially not BUG_ON() based on the value. If we ever supported SMP guests, they could trigger that. And the Launcher could also trigger it (tho currently root-only). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: PAE supportMatias Zabaljauregui4-39/+329
This version requires that host and guest have the same PAE status. NX cap is not offered to the guest, yet. Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: replace hypercall name LHCALL_SET_PMD with LHCALL_SET_PGDMatias Zabaljauregui3-4/+4
replace LHCALL_SET_PMD with LHCALL_SET_PGD hypercall name (That's really what it is, and the confusion gets worse with PAE support) Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reported-by: Jeremy Fitzhardinge <jeremy@goop.org>
2009-06-12lguest: use native_set_* macros, which properly handle 64-bit entries when ↵Matias Zabaljauregui1-17/+18
PAE is activated Some cleanups and replace direct assignment with native_set_* macros which properly handle 64-bit entries when PAE is activated Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: map switcher with executable page table entriesMatias Zabaljauregui2-2/+2
Map switcher with executable page table entries. (This bug didn't matter before PAE and hence NX support -- RR) Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: Segment selectors are 16-bit long. Fix lg_cpu.ss1 definition.Matias Zabaljauregui1-1/+1
If GDT_ENTRIES were every > 256, this could become a problem. Signed-off-by: Matias Zabaljauregui <zabaljauregui at gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: beyond ARRAY_SIZE of cpu->arch.gdtRoel Kluin1-1/+1
Do not go beyond ARRAY_SIZE of cpu->arch.gdt Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: improve interrupt handling, speed up stream networkingRusty Russell4-8/+23
lguest never checked for pending interrupts when enabling interrupts, and things still worked. However, it makes a significant difference to TCP performance, so it's time we fixed it by introducing a pending_irq flag and checking it on irq_restore and irq_enable. These two routines are now too big to patch into the 8/10 bytes patch space, so we drop that code. Note: The high latency on interrupt delivery had a very curious effect: once everything else was optimized, networking without GSO was faster than networking with GSO, since more interrupts were sent and hence a greater chance of one getting through to the Guest! Note2: (Almost) Closing the same loophole for iret doesn't have any measurable effect, so I'm leaving that patch for the moment. Before: 1GB tcpblast Guest->Host: 30.7 seconds 1GB tcpblast Guest->Host (no GSO): 76.0 seconds After: 1GB tcpblast Guest->Host: 6.8 seconds 1GB tcpblast Guest->Host (no GSO): 27.8 seconds Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: fix race in halt codeRusty Russell3-12/+31
When the Guest does the LHCALL_HALT hypercall, we go to sleep, expecting that a timer or the Waker will wake_up_process() us. But we do it in a stupid way, leaving a classic missing wakeup race. So split maybe_do_interrupt() into interrupt_pending() and try_deliver_interrupt(), and check maybe_do_interrupt() and the "break_out" flag before calling schedule. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: fix lguest wake on guest clock tick, or fd activityRusty Russell2-5/+5
The Launcher could be inside the Guest on another CPU; wake_up_process will do nothing because it is "running". kick_process will knock it back into our kernel in this case, otherwise we'll miss it until the next guest exit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12virtio: find_vqs/del_vqs virtio operationsMichael S. Tsirkin1-2/+34
This replaces find_vq/del_vq with find_vqs/del_vqs virtio operations, and updates all drivers. This is needed for MSI support, because MSI needs to know the total number of vectors upfront. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (+ lguest/9p compile fixes)
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 00:52:26 +0000