summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2012-09-14Merge branch 'i2c-embedded/for-current' of ↵Linus Torvalds3-32/+40
git://git.pengutronix.de/git/wsa/linux Pull i2c embedded fixes from Wolfram Sang: "The last bunch of (typical) i2c-embedded driver fixes for 3.6. Also update the MAINTAINERS file to point to my tree since people keep asking where to find their patches." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: algo: pca: Fix mode selection for PCA9665 MAINTAINERS: fix tree for current i2c-embedded development i2c: mxs: correctly setup speed for non devicetree i2c: pnx: Fix read transactions of >= 2 bytes i2c: pnx: Fix bit definitions
2012-09-14i2c: algo: pca: Fix mode selection for PCA9665Thomas Kavanagh1-3/+3
The code currently always selects turbo mode for PCA9665, no matter which clock frequency is configured. This is because it compares the clock frequency against constants reflecting (boundary / 100). Compare against real boundary frequencies to fix the problem. Signed-off-by: Thomas Kavanagh <tkavanagh@juniper.net> Signed-off-by: Guenter Roeck <groeck@juniper.net> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: mxs: correctly setup speed for non devicetreeWolfram Sang1-7/+6
Commit cd4f2d4 (i2c: mxs: Set I2C timing registers for mxs-i2c) only covered the case for devicetree and made platform_data based boards bail out with -EINVAL. Correctly support the latter one, too. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: pnx: Fix read transactions of >= 2 bytesRoland Stigge1-20/+28
On transactions with n>=2 bytes, the controller actually wrongly clocks in n+1 bytes. This is caused by the (wrong) assumption that RFE in the Status Register is 1 iff there is no byte already ordered (via a dummy TX byte). This lead to the implementation of synchronized byte ordering, e.g.: Dummy-TX - RX - Dummy-TX - RX - ... But since RFE actually stays high after some Dummy-TX, it rather looks like: Dummy-TX - Dummy-TX - RX - Dummy-TX - RX - (RX) The last RX byte is clocked in by the bus controller, but ignored by the kernel when filling the userspace buffer. This patch fixes the issue by asking for RX via Dummy-TX asynchronously. Introducing a separate counter for TX bytes. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: pnx: Fix bit definitionsRoland Stigge1-2/+3
The I2C Control Register bits RFDAIE and RFFIE were mixed up. In addition to this fix, this patch adds the missing bit DRSIE for completeness. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-10i2c-core: Fix for lockdep validatorJean Delvare1-2/+20
If kernel is compiled with CONFIG_PROVE_LOCKING the validator raises an error when a multiplexer is removed via sysfs and sub-clients are connected to it. This is a false positive. Documentation/lockdep-design.txt recommends to handle this via calls to mutex_lock_nested(). Based on an earlier fix from Michael Lawnick. Note that the extra code resolves to nothing unless CONFIG_DEBUG_LOCK_ALLOC=y. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michael Lawnick <ml.lawnick@gmx.de>
2012-09-10i2c-designware: Fix build error if CONFIG_I2C_DESIGNWARE_PLATFORM=y && ↵Axel Lin3-2/+19
CONFIG_I2C_DESIGNWARE_PCI=y This patch adds config I2C_DESIGNWARE_CORE in Kconfig, and let I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_PCI select I2C_DESIGNWARE_CORE. Because both I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_PCI can be built as built-in or module, we also need to export the functions in i2c-designware-core. This fixes below build error when CONFIG_I2C_DESIGNWARE_PLATFORM=y && CONFIG_I2C_DESIGNWARE_PCI=y: LD drivers/i2c/busses/built-in.o drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_clear_int': i2c-designware-core.c:(.text+0xa10): multiple definition of `i2c_dw_clear_int' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x928): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_init': i2c-designware-core.c:(.text+0x178): multiple definition of `i2c_dw_init' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x90): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `dw_readl': i2c-designware-core.c:(.text+0xe8): multiple definition of `dw_readl' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x0): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_isr': i2c-designware-core.c:(.text+0x724): multiple definition of `i2c_dw_isr' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x63c): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_xfer': i2c-designware-core.c:(.text+0x4b0): multiple definition of `i2c_dw_xfer' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x3c8): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_is_enabled': i2c-designware-core.c:(.text+0x9d4): multiple definition of `i2c_dw_is_enabled' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8ec): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `dw_writel': i2c-designware-core.c:(.text+0x124): multiple definition of `dw_writel' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x3c): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_xfer_msg': i2c-designware-core.c:(.text+0x2e8): multiple definition of `i2c_dw_xfer_msg' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x200): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_enable': i2c-designware-core.c:(.text+0x9c8): multiple definition of `i2c_dw_enable' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8e0): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_read_comp_param': i2c-designware-core.c:(.text+0xa24): multiple definition of `i2c_dw_read_comp_param' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x93c): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_disable': i2c-designware-core.c:(.text+0x9dc): multiple definition of `i2c_dw_disable' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8f4): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_func': i2c-designware-core.c:(.text+0x710): multiple definition of `i2c_dw_func' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x628): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_disable_int': i2c-designware-core.c:(.text+0xa18): multiple definition of `i2c_dw_disable_int' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x930): first defined here make[3]: *** [drivers/i2c/busses/built-in.o] Error 1 make[2]: *** [drivers/i2c/busses] Error 2 make[1]: *** [drivers/i2c] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Jiri Slaby <jslaby@suse.cz> Cc: stable@vger.kernel.org [3.2+]
2012-09-10i2c-i801: Add Device IDs for Intel Lynx Point-LP PCHJames Ralston2-0/+4
Add the SMBus Device IDs for the Intel Lynx Point-LP PCH. Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-08-18i2c: tegra: protect suspend/resume callbacks with CONFIG_PM_SLEEPLaxman Dewangan1-1/+1
The CONFIG_PM doesn't actually enable any of the PM callbacks, it only allows to enable CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME. This means if CONFIG_PM is used to protect system sleep callbacks then it may end up unreferenced if only runtime PM is enabled. Hence protecting sleep callbacks with CONFIG_PM_SLEEP. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-08-18i2c: diolan-u2c: Fix master_xfer return codeGuenter Roeck1-0/+1
The master_xfer function returns 0 on success. It should return the number of successful transactions. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-08-18I2C: OMAP: xfer: fix runtime PM get/put balance on errorKevin Hilman1-1/+1
In omap_i2c_xfer(), ensure pm_runtime_put() is called, even on failure. Without this, after a failed xfer, the runtime PM usecount will have been incremented, but not decremented causing the usecount to never reach zero after a failure. This keeps the device always runtime PM enabled which keeps the enclosing power domain active, and prevents full-chip retention/off from happening during idle. Signed-off-by: Kevin Hilman <khilman@ti.com> Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-08-18i2c: nomadik: Add default configuration into the Nomadik I2C driverLee Jones1-10/+18
At this moment in time there is only one known configuration for the Nomadik I2C driver. By not holding that configuration in the driver adds some unnecessary overhead in platform code. The configuration has already been removed from platform code, this patch checks for any over-riding configurations. If there aren't any, the default is used. [LinusW says: "Right now this is causing boot regressions so we need it badly..."] Acked-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-07-31Merge tag 'random_for_linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull random subsystem patches from Ted Ts'o: "This patch series contains a major revamp of how we collect entropy from interrupts for /dev/random and /dev/urandom. The goal is to addresses weaknesses discussed in the paper "Mining your Ps and Qs: Detection of Widespread Weak Keys in Network Devices", by Nadia Heninger, Zakir Durumeric, Eric Wustrow, J. Alex Halderman, which will be published in the Proceedings of the 21st Usenix Security Symposium, August 2012. (See https://factorable.net for more information and an extended version of the paper.)" Fix up trivial conflicts due to nearby changes in drivers/{mfd/ab3100-core.c, usb/gadget/omap_udc.c} * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (33 commits) random: mix in architectural randomness in extract_buf() dmi: Feed DMI table to /dev/random driver random: Add comment to random_initialize() random: final removal of IRQF_SAMPLE_RANDOM um: remove IRQF_SAMPLE_RANDOM which is now a no-op sparc/ldc: remove IRQF_SAMPLE_RANDOM which is now a no-op [ARM] pxa: remove IRQF_SAMPLE_RANDOM which is now a no-op board-palmz71: remove IRQF_SAMPLE_RANDOM which is now a no-op isp1301_omap: remove IRQF_SAMPLE_RANDOM which is now a no-op pxa25x_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op omap_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op goku_udc: remove IRQF_SAMPLE_RANDOM which was commented out uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op drivers: hv: remove IRQF_SAMPLE_RANDOM which is now a no-op xen-blkfront: remove IRQF_SAMPLE_RANDOM which is now a no-op n2_crypto: remove IRQF_SAMPLE_RANDOM which is now a no-op pda_power: remove IRQF_SAMPLE_RANDOM which is now a no-op i2c-pmcmsp: remove IRQF_SAMPLE_RANDOM which is now a no-op input/serio/hp_sdc.c: remove IRQF_SAMPLE_RANDOM which is now a no-op mfd: remove IRQF_SAMPLE_RANDOM which is now a no-op ...
2012-07-30Merge branch 'v4l_for_linus' of ↵Linus Torvalds1-11/+33
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "This is the first part of the media patches for v3.6. This patch series contain: - new DVB frontend: rtl2832 - new video drivers: adv7393 - some unused files got removed - a selection API cleanup between V4L2 and V4L2 subdev API's - a major redesign at v4l-ioctl2, in order to clean it up - several driver fixes and improvements." * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (174 commits) v4l: Export v4l2-common.h in include/linux/Kbuild media: Revert "[media] Terratec Cinergy S2 USB HD Rev.2" [media] media: Use pr_info not homegrown pr_reg macro [media] Terratec Cinergy S2 USB HD Rev.2 [media] v4l: Correct conflicting V4L2 subdev selection API documentation [media] Feature removal: V4L2 selections API target and flag definitions [media] v4l: Unify selection flags documentation [media] v4l: Unify selection flags [media] v4l: Common documentation for selection targets [media] v4l: Unify selection targets across V4L2 and V4L2 subdev interfaces [media] v4l: Remove "_ACTUAL" from subdev selection API target definition names [media] V4L: Remove "_ACTIVE" from the selection target name definitions [media] media: dvb-usb: print mac address via native %pM [media] s5p-tv: Use module_i2c_driver in sii9234_drv.c file [media] media: gpio-ir-recv: add allowed_protos for platform data [media] s5p-jpeg: Use module_platform_driver in jpeg-core.c file [media] saa7134: fix spelling of detach in label [media] cx88-blackbird: replace ioctl by unlocked_ioctl [media] cx88: don't use current_norm [media] cx88: fix a number of v4l2-compliance violations ...
2012-07-30Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds1-7/+0
Merge Andrew's first set of patches: "Non-MM patches: - lots of misc bits - tree-wide have_clk() cleanups - quite a lot of printk tweaks. I draw your attention to "printk: convert the format for KERN_<LEVEL> to a 2 byte pattern" which looks a bit scary. But afaict it's solid. - backlight updates - lib/ feature work (notably the addition and use of memweight()) - checkpatch updates - rtc updates - nilfs updates - fatfs updates (partial, still waiting for acks) - kdump, proc, fork, IPC, sysctl, taskstats, pps, etc - new fault-injection feature work" * Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits) drivers/misc/lkdtm.c: fix missing allocation failure check lib/scatterlist: do not re-write gfp_flags in __sg_alloc_table() fault-injection: add tool to run command with failslab or fail_page_alloc fault-injection: add selftests for cpu and memory hotplug powerpc: pSeries reconfig notifier error injection module memory: memory notifier error injection module PM: PM notifier error injection module cpu: rewrite cpu-notifier-error-inject module fault-injection: notifier error injection c/r: fcntl: add F_GETOWNER_UIDS option resource: make sure requested range is included in the root range include/linux/aio.h: cpp->C conversions fs: cachefiles: add support for large files in filesystem caching pps: return PTR_ERR on error in device_create taskstats: check nla_reserve() return sysctl: suppress kmemleak messages ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION ipc: compat: use signed size_t types for msgsnd and msgrcv ipc: allow compat IPC version field parsing if !ARCH_WANT_OLD_COMPAT_IPC ipc: add COMPAT_SHMLBA support ...
2012-07-30i2c/i2c-pxa: remove conditional compilation of clk codeViresh Kumar1-7/+0
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h, there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif macros. pxa i2c also has these dummy macros defined locally. Remove them as they aren't required anymore. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-43/+49
Pull MIPS updates from Ralf Baechle: "More hardware support across the field including a bunch of device drivers. The highlight however really are further steps towards device tree. This has been sitting in -next for ages. All MIPS _defconfigs have been tested to boot or where I don't have hardware available, to at least build fine." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (77 commits) MIPS: Loongson 1B: Add defconfig MIPS: Loongson 1B: Add board support MIPS: Netlogic: early console fix MIPS: Netlogic: Fix indentation of smpboot.S MIPS: Netlogic: remove cpu_has_dc_aliases define for XLP MIPS: Netlogic: Remove unused pcibios_fixups MIPS: Netlogic: Add XLP SoC devices in FDT MIPS: Netlogic: Add IRQ mappings for more devices MIPS: Netlogic: USB support for XLP MIPS: Netlogic: XLP PCIe controller support. MIPS: Netlogic: Platform changes for XLR/XLS I2C MIPS: Netlogic: Platform NAND/NOR flash support MIPS: Netlogic: Platform changes for XLS USB MIPS: Netlogic: Remove NETLOGIC_ prefix MIPS: Netlogic: SMP wakeup code update MIPS: Netlogic: Update comments in smpboot.S MIPS: BCM63XX: Add 96328avng reference board MIPS: Expose PCIe drivers for MIPS MIPS: BCM63XX: Add PCIe Support for BCM6328 MIPS: BCM63XX: Move the PCI initialization into its own function ...
2012-07-28Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds14-541/+623
Pull embedded i2c changes from Wolfram Sang: "Changes for the "embedded" part of the I2C subsystem: - lots of devicetree conversions of drivers (and preparations for that) - big cleanups for drivers for OMAP, Tegra, Nomadik, Blackfin - Rafael's struct dev_pm_ops conversion patches for I2C - usual driver cleanups and fixes All patches have been in linux-next for an apropriate time and all patches touching files outside of i2c-folders should have proper acks from the maintainers." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (60 commits) Revert "i2c: tegra: convert normal suspend/resume to *_noirq" I2C: MV64XYZ: Add Device Tree support i2c: stu300: use devm managed resources i2c: i2c-ocores: support for 16bit and 32bit IO V4L/DVB: mfd: use reg_shift instead of regstep i2c: i2c-ocores: Use reg-shift property i2c: i2c-ocores: DT bindings and minor fixes. i2c: mv64xxxx: remove EXPERIMENTAL tag i2c-s3c2410: Use plain pm_runtime_put() i2c: s3c2410: Fix pointer type passed to of_match_node() i2c: mxs: Set I2C timing registers for mxs-i2c i2c: i2c-bfin-twi: Move blackfin TWI register access Macro to head file. i2c: i2c-bfin-twi: Move TWI peripheral pin request array to platform data. i2c:i2c-bfin-twi: include twi head file i2c:i2c-bfin-twi: TWI fails to restart next transfer in high system load. i2c: i2c-bfin-twi: Tighten condition when failing I2C transfer if MEN bit is reset unexpectedly. i2c: i2c-bfin-twi: Break dead waiting loop if i2c device misbehaves. i2c: i2c-bfin-twi: Improve the patch for bug "Illegal i2c bus lock upon certain transfer scenarios". i2c: i2c-bfin-twi: Illegal i2c bus lock upon certain transfer scenarios. i2c-mv64xxxx: allow more than one driver instance ... Conflicts: drivers/i2c/busses/i2c-nomadik.c
2012-07-24Revert "i2c: tegra: convert normal suspend/resume to *_noirq"Wolfram Sang1-6/+3
This reverts commit 7c86d44cda2e715bc95f525fd0eac4bd6a66998e. Stephen says: IIRC, I proposed it before solely to solve some suspend/resume ordering issues, and Colin Cross NAKd it. These days, deferred probe should make this change unnecessary. Reported-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-07-24i2c-omap: Add support for I2C_M_STOP message flagLaurent Pinchart1-1/+4
Generate a stop condition after each message marked with I2C_M_STOP. [JD: Add I2C_FUNC_PROTOCOL_MANGLING.] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24i2c: Fall back to emulated SMBus if the operation isn't supported nativelyLaurent Pinchart1-4/+10
Adapter drivers might support only a subset of the SMBus operations natively. Those drivers currently have to manually emulate unsupported operations using I2C. Make the i2c_smbus_xfer() function fall back to i2c_smbus_xfer_emulated() when the adapter's .smbus_xfer() operation returns -EOPNOTSUPP, like it already does when the .smbus_xfer() operation isn't available at all. [JD: Minor optimization.] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24i2c: Add SCCB supportLaurent Pinchart1-1/+1
SCCB is a serial communication bus developed by Omnivision. Its 2-wire mode is very similar to SMBus byte data transactions, but requires the controller to ignore the ACK bit and to insert a stop condition after each message. Add a device SCCB flag and a message stop flag to be passed to controller drivers. [JD: Kill rogue definition in go7007 driver.] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24i2c-tiny-usb: Add support for the Robofuzz OSIF USB/I2C converterEmmanuel Deloget1-0/+1
Robofuzz OSIF is a generic USB/iIC interface that embeds an ATMega8A AVR-RISC microcontroler. The device is based upon Till Harbaum's i2c-tiny-usb and although it enhances the original design with further functionnalities it still maintain compatibility with it with respect to the USB/I2C interface. Signed-off-by: Emmanuel Deloget <logout@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24i2c-i801: Enable IRQ for byte_by_byte transactionsDaniel Kurtz1-7/+78
Byte-by-byte transactions are used primarily for accessing I2C devices with an SMBus controller. For these transactions, for each byte that is read or written, the SMBus controller generates a BYTE_DONE IRQ. The isr reads/writes the next byte, and clears the IRQ flag to start the next byte. On the penultimate IRQ, the isr also sets the LAST_BYTE flag. There is no locking around the cmd/len/count/data variables, since the I2C adapter lock ensures there is never multiple simultaneous transactions for the same device, and the driver thread never accesses these variables while interrupts might be occurring. The end result is faster I2C block read and write transactions. Note: This patch has only been tested and verified by doing I2C read and write block transfers on Cougar Point 6 Series PCH, as well as I2C read block transfers on ICH5. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24i2c-i801: Enable interrupts on ICH5/7/8/9/10Jean Delvare1-4/+9
Enable interrupts on more devices. ICH5, ICH7(-M) and ICH10 have been tested to work OK. ICH8 and ICH9 are expected to work just fine as they are very close to ICH7 and ICH10. Ultimately we want to enable this feature on at least every device since the ICH5, but for now we limit the exposure. We'll enable it for other devices if we don't get negative feedback. As a bonus, let the user know when interrupts are used. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Daniel Kurtz <djkurtz@chromium.org>
2012-07-24i2c-i801: Enable IRQ for SMBus transactionsDaniel Kurtz1-4/+95
Add a new 'feature' to i2c-i801 to enable using PCI interrupts. When the feature is enabled, then an isr is installed for the device's PCI IRQ. An I2C/SMBus transaction is always terminated by one of the following interrupt sources: FAILED, BUS_ERR, DEV_ERR, or on success: INTR. When the isr fires for one of these cases, it sets the ->status variable and wakes up the waitq. The waitq then saves off the status code, and clears ->status (in preparation for some future transaction). The SMBus controller generates an INTR irq at the end of each transaction where INTREN was set in the HST_CNT register. No locking is needed around accesses to priv->status since all writes to it are serialized: it is only ever set once in the isr at the end of a transaction, and cleared while no interrupts can occur. In addition, the I2C adapter lock guarantees that entire I2C transactions for a single adapter are always serialized. For this patch, the INTREN bit is set only for SMBus block, byte and word transactions, but not for I2C reads or writes. The use of the DS (BYTE_DONE) interrupt with byte-by-byte I2C transactions is implemented in a subsequent patch. The interrupt feature has only been enabled for COUGARPOINT hardware. In addition, it is disabled if SMBus is using the SMI# interrupt. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24i2c-i801: Consolidate pollingJean Delvare1-55/+53
(Based on earlier work by Daniel Kurtz.) Come up with a consistent, driver-wide strategy for event polling. For intermediate steps of byte-by-byte block transactions, check for BYTE_DONE or any error flag being set. At the end of every transaction (regardless of PEC being used), check for both BUSY being cleared and INTR or any error flag being set. This ensures proper action for all transaction types. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Daniel Kurtz <djkurtz@chromium.org>
2012-07-24i2c-i801: Drop ENABLE_INT9Daniel Kurtz1-5/+4
Later patches enable interrupts. This preliminary patch removes the older unsupported ENABLE_INT9 flag. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24i2c-i801: Rename some SMBHSTCNT bit constantsDaniel Kurtz1-10/+11
Rename the SMBHSTCNT register bit access constants to match the style of other register bits. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24i2c-i801: Check and return errors during byte-by-byte transfersDaniel Kurtz1-4/+6
If an error is detected in the polling loop, abort the transaction and return an error code. * DEV_ERR is set if the device does not respond with an acknowledge, and the SMBus controller times out (minimum 25ms). * BUS_ERR is set if a bus arbitration collision is detected. In other words, when the SMBus controller tries to generate a START condition, but detects that the SMBDATA is being held low, usually by another SMBus/I2C master. * FAILED is only set if a transaction is stopped by software (using the SMBHSTCNT KILL bit). Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24i2c-i801: Clear only status bits in HST_STSDaniel Kurtz1-1/+1
Writing back the whole status register could clear unwanted bits. In particular, it could clear the "INUSE_STS" bit, which is a 'hardware semaphore', that might be useful to use some day. To prepare for this, let's ban writing back the whole status to register HST_STS, of which this is the only instance. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24i2c-i801: Refactor use of LAST_BYTE in i801_block_transaction_byte_by_byteDaniel Kurtz1-14/+14
As a slight optimization, pull some logic out of the polling loop during byte-by-byte transactions by just setting the I801_LAST_BYTE bit, as defined in the i801 (PCH) datasheet, when reading the last byte of a byte-by-byte I2C_SMBUS_READ. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24i2c-smbus: Use module_i2c_driver()Fabio Estevam1-12/+1
Using module_i2c_driver() makes the code smaller and cleaner. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24i2c-piix4: Support AMD auxiliary SMBus controllerAndrew Armenia2-4/+73
Some AMD chipsets, such as the SP5100, have an auxiliary SMBus controller with a second set of registers. This patch adds support for this auxiliary controller. Tested on ASUS KCMA-D8 motherboard. Signed-off-by: Andrew Armenia <andrew@asquaredlabs.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24i2c-piix4: Separate registration and probing codeAndrew Armenia1-40/+71
Some chipsets have multiple sets of SMBus registers each controlling a separate SMBus. Supporting these chipsets properly will require registering multiple I2C adapters for one piix4. The code to initialize and register the i2c_adapter structure has been separated from piix4_probe and allows registration of a piix4 adapter given its base address. Note that the i2c_adapter and i2c_piix4_adapdata structures are now dynamically allocated. Signed-off-by: Andrew Armenia <andrew@asquaredlabs.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24i2c-piix4: Eliminate piix4_smba global variableAndrew Armenia1-16/+34
Some chipsets have multiple sets of piix4-compatible SMBus registers. Eliminating the global variable will allow these chipsets to be fully supported. Return value from piix4_setup and piix4_sb800_setup now returns the smba value detected. This is stored in a struct i2c_piix4_adapdata. Thus the global variable is eliminated. Signed-off-by: Andrew Armenia <andrew@asquaredlabs.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-24i2c/busses: Use module_pci_driverAxel Lin16-200/+16
Convert the drivers in drivers/i2c/busses/* to usemodule_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Olof Johansson <olof@lixom.net> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Tomoya MORINAGA <tomoya.rohm@gmail.com>
2012-07-24i2c: Update Guenter Roeck's e-mail addressGuenter Roeck2-2/+2
My old e-mail address won't be valid for much longer. Time to update it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-23Merge branch 'next' of ↵Linus Torvalds1-24/+133
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "Notable highlights: - iommu improvements from Anton removing the per-iommu global lock in favor of dividing the DMA space into pools, each with its own lock, and hashed on the CPU number. Along with making the locking more fine grained, this gives significant improvements in multiqueue networking scalability. - Still from Anton, we know provide a vdso based variant of getcpu which makes sched_getcpu with the appropriate glibc patch something like 18 times faster. - More anton goodness (he's been busy !) in other areas such as a faster __clear_user and copy_page on P7, various perf fixes to improve sampling quality, etc... - One more step toward removing legacy i2c interfaces by using new device-tree based probing of platform devices for the AOA audio drivers - A nice series of patches from Michael Neuling that helps avoiding confusion between register numbers and litterals in assembly code, trying to enforce the use of "%rN" register names in gas rather than plain numbers. - A pile of FSL updates - The usual bunch of small fixes, cleanups etc... You may spot a change to drivers/char/mem. The patch got no comment or ack from outside, it's a trivial patch to allow the architecture to skip creating /dev/port, which we use to disable it on ppc64 that don't have a legacy brige. On those, IO ports 0...64K are not mapped in kernel space at all, so accesses to /dev/port cause oopses (and yes, distros -still- ship userspace that bangs hard coded ports such as kbdrate)." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits) powerpc/mpic: Create a revmap with enough entries for IPIs and timers Remove stale .rej file powerpc/iommu: Fix iommu pool initialization powerpc/eeh: Check handle_eeh_events() return value powerpc/85xx: Add phy nodes in SGMII mode for MPC8536/44/72DS & P2020DS powerpc/e500: add paravirt QEMU platform powerpc/mpc85xx_ds: convert to unified PCI init powerpc/fsl-pci: get PCI init out of board files powerpc/85xx: Update corenet64_smp_defconfig powerpc/85xx: Update corenet32_smp_defconfig powerpc/85xx: Rename P1021RDB-PC device trees to be consistent powerpc/watchdog: move booke watchdog param related code to setup-common.c sound/aoa: Adapt to new i2c probing scheme i2c/powermac: Improve detection of devices from device-tree powerpc: Disable /dev/port interface on systems without an ISA bridge of: Improve prom_update_property() function powerpc: Add "memory" attribute for mfmsr() powerpc/ftrace: Fix assembly trampoline register usage powerpc/hw_breakpoints: Fix incorrect pointer access powerpc: Put the gpr save/restore functions in their own section ...
2012-07-23Merge tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-5/+5
Pull arm-soc clk changes from Arnd Bergmann: "Clock support is moving to the clk subsystem. These tegra, omap and imx changes are for code that is still platform specific and not (yet) part of that subsystem." Fix up conflicts in arch/arm/mach-{imx/clk-imx51-imx53.c,omap2/Makefile} * tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) ARM: imx: clk-imx31: Fix clock id for rnga driver ARM: imx: add missing item to the list of clock event modes ARM: i.MX5x CSPI: Fixed clock name for CSPI ARM: i.MX5x clocks: Fix GPT clocks ARM: i.MX5x clocks: Fix parent for PWM clocks ARM: i.MX5x clocks: Add EPIT support ARM: mx27: Reenable silicon version print ARM: clk-imx27: Fix rtc clock id ARM: tegra: Provide clock for only one PWM controller ARM: tegra: Fix PWM clock programming ARM: OMAP3+: clock33xx: Add AM33XX clock tree data ARM: OMAP3+: clock: Move common clksel_rate & clock data to common file ARM: tegra: dma: rename driver name for clock to "tegra-apbdma" ARM: tegra: Remove second instance of uart clk crypto: add clk_prepare/clk_unprepare ASoC: tegra: add clk_prepare/clk_unprepare staging: nvec: add clk_prepare/clk_unprepare spi/tegra: add clk_prepare/clk_unprepare Input: tegra-kbc - add clk_prepare/clk_unprepare USB: ehci-tegra: add clk_prepare/clk_unprepare ...
2012-07-23Merge tag 'irq' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+0
Pull arm-soc sparse IRQ conversion from Arnd Bergmann: "The I.MX platform is getting converted to use sparse IRQs. We are doing this for all platforms over time, because this is one of the requirements for building a multiplatform kernel, and generally a good idea." * tag 'irq' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx: select USE_OF ARM: imx: Fix build error due to missing irqs.h include ARM: imx: enable SPARSE_IRQ for imx platform ARM: fiq: change FIQ_START to a variable tty: serial: imx: remove the use of MXC_INTERNAL_IRQS ARM: imx: remove unneeded mach/irq.h inclusion i2c: imx: remove unneeded mach/irqs.h inclusion ARM: imx: add a legacy irqdomain for mx31ads ARM: imx: add a legacy irqdomain for 3ds_debugboard ARM: imx: pass gpio than irq number into mxc_expio_init ARM: imx: leave irq_base of wm8350_platform_data uninitialized dma: ipu: remove the use of ipu_platform_data ARM: imx: move irq_domain_add_legacy call into avic driver ARM: imx: move irq_domain_add_legacy call into tzic driver gpio/mxc: move irq_domain_add_legacy call into gpio driver ARM: imx: eliminate macro IRQ_GPIOx() ARM: imx: eliminate macro IOMUX_TO_IRQ() ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()
2012-07-23I2C: MV64XYZ: Add Device Tree supportAndrew Lunn1-5/+128
Extends the driver to get properties from device tree. Rather than pass the N & M factors in DT, use the more standard clock-frequency property. Calculate N & M at run time. In order to do this, we need to know tclk. So the driver uses clk_get() etc in order to get the clock and clk_get_rate() to determine the tclk rate. Not all platforms however have CLK, so some #ifdefery is needed to ensure the driver still compiles when CLK is not available. Signed-off-by: Andrew Lunn <andrew@lunn.ch> [wsa: converted some ints to u32 to match signedness] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-07-23i2c: Convert i2c-octeon.c to use device tree.David Daney1-43/+49
There are three parts to this: 1) Remove the definitions of OCTEON_IRQ_TWSI and OCTEON_IRQ_TWSI2. The interrupts are specified by the device tree and these hard coded irq numbers block the used of the irq lines by the irq_domain code. 2) Remove platform device setup code from octeon-platform.c, it is now unused. 3) Convert i2c-octeon.c to use device tree. Part of this includes using the devm_* functions instead of the raw counterparts, thus simplifying error handling. No functionality is changed. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/3939/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-19i2c-pmcmsp: remove IRQF_SAMPLE_RANDOM which is now a no-opTheodore Ts'o1-2/+1
With the changes in the random tree, IRQF_SAMPLE_RANDOM is now a no-op; interrupt randomness is now collected unconditionally in a very low-overhead fashion; see commit 775f4b297b. The IRQF_SAMPLE_RANDOM flag was scheduled to be removed in 2009 on the feature-removal-schedule, so this patch is preparation for the final removal of this flag. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: "Ben Dooks" <ben-linux@fluff.org> Cc: "Wolfram Sang" <w.sang@pengutronix.de>
2012-07-16i2c: stu300: use devm managed resourcesLinus Walleij1-65/+18
Allocate memory for device state using devm_kzalloc(), get the clock using devm_clk_get(), get the IRQ using devm_request_irq(), request and remap memory using devm_request_and_ioremap(). All to simplify accounting and letting the kernel do the garbage-collection. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-07-14i2c: i2c-ocores: support for 16bit and 32bit IOGanesan Ramalingam1-2/+19
Some architectures supports only 16-bit or 32-bit read/write access to their IO space. Add a 'reg-io-width' platform and OF parameter which specifies the IO width to support these platforms. reg-io-width can be specified as 1, 2 or 4, and has a default value of 1 if it is unspecified. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-07-14i2c: i2c-ocores: Use reg-shift propertyGanesan Ramalingam1-14/+22
Deprecate 'regstep' property and use the standard 'reg-shift' property for register offset shifts. 'regstep' will still be supported as an optional property, but will give a warning when used. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-07-14i2c: i2c-ocores: DT bindings and minor fixes.Jayachandran C1-38/+7
Cleanups to i2c-cores, no change in logic, changes are: * Move i2c-ocores device tree documentation from source file to Documentation/devicetree/bindings/i2c/i2c-ocores.txt. * Add \n to dev_warn and dev_err messages where missing * Minor updates to the text and formatting fixes. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-07-14i2c: mv64xxxx: remove EXPERIMENTAL tagWolfram Sang1-1/+1
As git history indicates, the driver predates the git era and is heavily used and worked on since. Not EXPERIMENTAL anymore. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Rodolfo Giometti <giometti@linux.it> Cc: Florian Fainelli <ffainelli@freebox.fr>
2012-07-13i2c-s3c2410: Use plain pm_runtime_put()Mark Brown1-2/+2
There's no point in using _sync() as we don't really care if the suspend has completed immediately. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 00:48:46 +0000