summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-05-11KVM: X86: Let kvm-clock report the right tsc frequencyJoerg Roedel2-13/+18
This patch changes the kvm_guest_time_update function to use TSC frequency the guest actually has for updating its clock. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: SVM: Implement infrastructure for TSC_RATE_MSRJoerg Roedel2-1/+54
This patch enhances the kvm_amd module with functions to support the TSC_RATE_MSR which can be used to set a given tsc frequency for the guest vcpu. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: Drop EFER.SVME requirement from VMMCALLAvi Kivity1-1/+1
VMMCALL requires EFER.SVME to be enabled in the host, not in the guest, which is what check_svme() checks. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: Re-add VendorSpecific tag to VMMCALL insnAvi Kivity1-1/+1
VMMCALL needs the VendorSpecific tag so that #UD emulation (called if a guest running on AMD was migrated to an Intel host) is allowed to process the instruction. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: PPC: Fix issue clearing exit timing countersBharat Bhushan3-3/+12
Following dump is observed on host when clearing the exit timing counters [root@p1021mds kvm]# echo -n 'c' > vm1200_vcpu0_timing INFO: task echo:1276 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. echo D 0ff5bf94 0 1276 1190 0x00000000 Call Trace: [c2157e40] [c0007908] __switch_to+0x9c/0xc4 [c2157e50] [c040293c] schedule+0x1b4/0x3bc [c2157e90] [c04032dc] __mutex_lock_slowpath+0x74/0xc0 [c2157ec0] [c00369e4] kvmppc_init_timing_stats+0x20/0xb8 [c2157ed0] [c0036b00] kvmppc_exit_timing_write+0x84/0x98 [c2157ef0] [c00b9f90] vfs_write+0xc0/0x16c [c2157f10] [c00ba284] sys_write+0x4c/0x90 [c2157f40] [c000e320] ret_from_syscall+0x0/0x3c The vcpu->mutex is used by kvm_ioctl_* (KVM_RUN etc) and same was used when clearing the stats (in kvmppc_init_timing_stats()). What happens is that when the guest is idle then it held the vcpu->mutx. While the exiting timing process waits for guest to release the vcpu->mutex and a hang state is reached. Now using seprate lock for exit timing stats. Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: MMU: remove mmu_seq verification on pte update pathXiao Guangrong3-15/+7
The mmu_seq verification can be removed since we get the pfn in the protection of mmu_lock. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: do not open code return values from the emulatorGleb Natapov1-3/+3
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: Remove base_addresss in kvm_pit since it is unusedJustin P. Mattock1-1/+0
The patch below removes unsigned long base_addresss; in i8254.h since it is unused. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: SVM: Remove nested sel_cr0_write handling codeJoerg Roedel1-52/+26
This patch removes all the old code which handled the nested selective cr0 write intercepts. This code was only in place as a work-around until the instruction emulator is capable of doing the same. This is the case with this patch-set and so the code can be removed. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: SVM: Add checks for IO instructionsJoerg Roedel3-15/+70
This patch adds code to check for IOIO intercepts on instructions decoded by the KVM instruction emulator. [avi: fix build error due to missing #define D2bvIP] Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: SVM: Add intercept checks for one-byte instructionsJoerg Roedel2-2/+16
This patch add intercept checks for emulated one-byte instructions to the KVM instruction emulation path. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: SVM: Add intercept checks for remaining twobyte instructionsJoerg Roedel3-7/+39
This patch adds intercepts checks for the remaining twobyte instructions to the KVM instruction emulator. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: SVM: Add intercept checks for remaining group7 instructionsJoerg Roedel2-2/+30
This patch implements the emulator intercept checks for the RDTSCP, MONITOR, and MWAIT instructions. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: SVM: Add intercept checks for SVM instructionsJoerg Roedel2-1/+51
This patch adds the necessary code changes in the instruction emulator and the extensions to svm.c to implement intercept checks for the svm instructions. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: SVM: Add intercept checks for descriptor table accessesJoerg Roedel2-2/+20
This patch add intercept checks into the KVM instruction emulator to check for the 8 instructions that access the descriptor table addresses. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: SVM: Add intercept check for accessing dr registersJoerg Roedel3-15/+56
This patch adds the intercept checks for instruction accessing the debug registers. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: SVM: Add intercept check for emulated cr accessesJoerg Roedel5-25/+192
This patch adds all necessary intercept checks for instructions that access the crX registers. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86: Add x86 callback for intercept checkJoerg Roedel6-11/+74
This patch adds a callback into kvm_x86_ops so that svm and vmx code can do intercept checks on emulated instructions. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: Add flag to check for protected mode instructionsJoerg Roedel2-0/+11
This patch adds a flag for the opcoded to tag instruction which are only recognized in protected mode. The necessary check is added too. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: Add check_perm callbackJoerg Roedel2-0/+15
This patch adds a check_perm callback for each opcode into the instruction emulator. This will be used to do all necessary permission checks on instructions before checking whether they are intercepted or not. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: Don't write-back cpu-state on X86EMUL_INTERCEPTEDJoerg Roedel3-0/+7
This patch prevents the changed CPU state to be written back when the emulator detected that the instruction was intercepted by the guest. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: add SVM interceptsAvi Kivity2-11/+48
Add intercept codes for instructions defined by SVM as interceptable. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: add framework for instruction interceptsAvi Kivity3-0/+55
When running in guest mode, certain instructions can be intercepted by hardware. This also holds for nested guests running on emulated virtualization hardware, in particular instructions emulated by kvm itself. This patch adds a framework for intercepting instructions. If an instruction is marked for interception, and if we're running in guest mode, a callback is called to check whether an intercept is needed or not. The callback is called at three points in time: immediately after beginning execution, after checking privilge exceptions, and after checking memory exception. This suits the different interception points defined for different instructions and for the various virtualization instruction sets. In addition, a new X86EMUL_INTERCEPT is defined, which any callback or memory access may define, allowing the more complicated intercepts to be implemented in existing callbacks. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: implement movdqu instruction (f3 0f 6f, f3 0f 7f)Avi Kivity1-2/+21
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: SSE supportAvi Kivity2-4/+104
Add support for marking an instruction as SSE, switching registers used to the SSE register file. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: Specialize decoding for insns with 66/f2/f3 prefixesAvi Kivity1-1/+25
Most SIMD instructions use the 66/f2/f3 prefixes to distinguish between different variants of the same instruction. Usually the encoding is quite regular, but in some cases (including non-SIMD instructions) the prefixes generate very different instructions. Examples include XCHG/PAUSE, MOVQ/MOVDQA/MOVDQU, and MOVBE/CRC32. Allow the emulator to handle these special cases by splitting such opcodes into groups, with different decode flags and execution functions for different prefixes. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: define callbacks for using the guest fpu within the emulatorAvi Kivity2-0/+20
Needed for emulating fpu instructions. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86 emulator: do not munge rep prefixAvi Kivity2-5/+3
Currently we store a rep prefix as 1 or 2 depending on whether it is a REPE or REPNE. Since sse instructions depend on the prefix value, store it as the original opcode to simplify things further on. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: 16-byte mmio supportAvi Kivity3-10/+32
Since sse instructions can issue 16-byte mmios, we need to support them. We can't increase the kvm_run mmio buffer size to 16 bytes without breaking compatibility, so instead we break the large mmios into two smaller 8-byte ones. Since the bus is 64-bit we aren't breaking any atomicity guarantees. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: Split mmio completion into a functionAvi Kivity1-14/+25
Make room for sse mmio completions. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: extend in-kernel mmio to handle >8 byte transactionsAvi Kivity1-12/+46
Needed for coalesced mmio using sse. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: x86: better fix for race between nmi injection and enabling nmi windowGleb Natapov1-1/+10
Fix race between nmi injection and enabling nmi window in a simpler way. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-05-11Revert "KVM: Fix race between nmi injection and enabling nmi window"Marcelo Tosatti2-4/+1
This reverts commit f86368493ec038218e8663cc1b6e5393cd8e008a. Simpler fix to follow. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-05-11KVM: expose async pf through our standard mechanismGlauber Costa1-0/+1
As Avi recently mentioned, the new standard mechanism for exposing features is KVM_GET_SUPPORTED_CPUID, not spamming CAPs. For some reason async pf missed that. So expose async_pf here. Signed-off-by: Glauber Costa <glommer@redhat.com> CC: Gleb Natapov <gleb@redhat.com> CC: Avi Kivity <avi@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: simplify NMI mask managementAvi Kivity1-8/+2
Use vmx_set_nmi_mask() instead of open-coding management of the hardware bit and the software hint (nmi_known_unmasked). There's a slight change of behaviour when running without hardware virtual NMI support - we now clear the NMI mask if NMI delivery faulted in that case as well. This improves emulation accuracy. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: SVM: Remove unused svm_featuresJan Kiszka1-3/+0
We use boot_cpu_has now. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Use cached VM_EXIT_INTR_INFO in handle_exceptionAvi Kivity1-1/+1
vmx_complete_atomic_exit() cached it for us, so we can use it here. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Don't VMREAD VM_EXIT_INTR_INFO unconditionallyAvi Kivity1-2/+7
Only read it if we're going to use it later. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Refactor vmx_complete_atomic_exit()Avi Kivity1-6/+9
Move the exit reason checks to the front of the function, for early exit in the common case. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Qualify check for host NMIAvi Kivity1-1/+2
Check for the exit reason first; this allows us, later, to avoid a VMREAD for VM_EXIT_INTR_INFO_FIELD. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Avoid vmx_recover_nmi_blocking() when unneededAvi Kivity1-1/+15
When we haven't injected an interrupt, we don't need to recover the nmi blocking state (since the guest can't set it by itself). This allows us to avoid a VMREAD later on. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Cache cplAvi Kivity2-1/+17
We may read the cpl quite often in the same vmexit (instruction privilege check, memory access checks for instruction and operands), so we gain a bit if we cache the value. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Optimize vmx_get_cpl()Avi Kivity1-1/+2
In long mode, vm86 mode is disallowed, so we need not check for it. Reading rflags.vm may require a VMREAD, so it is expensive. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: VMX: Optimize vmx_get_rflags()Avi Kivity2-6/+15
If called several times within the same exit, return cached results. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: Use kvm_get_rflags() and kvm_set_rflags() instead of the raw versionsAvi Kivity3-12/+12
Some rflags bits are owned by the host, not guest, so we need to use kvm_get_rflags() to strip those bits away or kvm_set_rflags() to add them back. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: cleanup memslot_id functionXiao Guangrong2-18/+5
We can get memslot id from memslot->id directly Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds40-232/+422
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) slcan: fix ldisc->open retval net/usb: mark LG VL600 LTE modem ethernet interface as WWAN xfrm: Don't allow esn with disabled anti replay detection xfrm: Assign the inner mode output function to the dst entry net: dev_close() should check IFF_UP vlan: fix GVRP at dismantle time netfilter: revert a2361c8735e07322023aedc36e4938b35af31eb0 netfilter: IPv6: fix DSCP mangle code netfilter: IPv6: initialize TOS field in REJECT target module IPVS: init and cleanup restructuring IPVS: Change of socket usage to enable name space exit. netfilter: ebtables: only call xt_compat_add_offset once per rule netfilter: fix ebtables compat support netfilter: ctnetlink: fix timestamp support for new conntracks pch_gbe: support ML7223 IOH PCH_GbE : Fixed the issue of checksum judgment PCH_GbE : Fixed the issue of collision detection NET: slip, fix ldisc->open retval be2net: Fixed bugs related to PVID. ehea: fix wrongly reported speed and port ...
2011-05-10slub: Revert "[PARISC] slub: fix panic with DISCONTIGMEM"David Rientjes1-1/+0
This reverts commit 4a5fa3590f09, which did not allow SLUB to be used on architectures that use DISCONTIGMEM without compiling NUMA support without CONFIG_BROKEN also set. The slub panic that it was intended to prevent is addressed by d9b41e0b54fd ("[PARISC] set memory ranges in N_NORMAL_MEMORY when onlined") on parisc so there is no further slub issues with such a configuration. The reverts allows SLUB now to be used on such architectures since there haven't been any reports of additional errors. Cc: James Bottomley <James.Bottomley@suse.de> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-10Merge branch 'pablo/nf-2.6-updates' of git://1984.lsi.us.es/net-2.6David S. Miller14-161/+279
2011-05-10slcan: fix ldisc->open retvalOliver Hartkopp1-1/+3
TTY layer expects 0 if the ldisc->open operation succeeded. Reported-by: Matvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 14:37:06 +0000