diff options
Diffstat (limited to 'drivers/scsi/isci/port_config.c')
| -rw-r--r-- | drivers/scsi/isci/port_config.c | 754 |
1 files changed, 754 insertions, 0 deletions
diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c new file mode 100644 index 00000000000..486b113c634 --- /dev/null +++ b/drivers/scsi/isci/port_config.c @@ -0,0 +1,754 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "host.h" + +#define SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT (10) +#define SCIC_SDS_APC_RECONFIGURATION_TIMEOUT (10) +#define SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION (100) + +enum SCIC_SDS_APC_ACTIVITY { + SCIC_SDS_APC_SKIP_PHY, + SCIC_SDS_APC_ADD_PHY, + SCIC_SDS_APC_START_TIMER, + + SCIC_SDS_APC_ACTIVITY_MAX +}; + +/* + * ****************************************************************************** + * General port configuration agent routines + * ****************************************************************************** */ + +/** + * + * @address_one: A SAS Address to be compared. + * @address_two: A SAS Address to be compared. + * + * Compare the two SAS Address and if SAS Address One is greater than SAS + * Address Two then return > 0 else if SAS Address One is less than SAS Address + * Two return < 0 Otherwise they are the same return 0 A signed value of x > 0 + * > y where x is returned for Address One > Address Two y is returned for + * Address One < Address Two 0 is returned ofr Address One = Address Two + */ +static s32 sci_sas_address_compare( + struct sci_sas_address address_one, + struct sci_sas_address address_two) +{ + if (address_one.high > address_two.high) { + return 1; + } else if (address_one.high < address_two.high) { + return -1; + } else if (address_one.low > address_two.low) { + return 1; + } else if (address_one.low < address_two.low) { + return -1; + } + + /* The two SAS Address must be identical */ + return 0; +} + +/** + * + * @controller: The controller object used for the port search. + * @phy: The phy object to match. + * + * This routine will find a matching port for the phy. This means that the + * port and phy both have the same broadcast sas address and same received sas + * address. The port address or the NULL if there is no matching + * port. port address if the port can be found to match the phy. + * NULL if there is no matching port for the phy. + */ +static struct isci_port *sci_port_configuration_agent_find_port( + struct isci_host *ihost, + struct isci_phy *iphy) +{ + u8 i; + struct sci_sas_address port_sas_address; + struct sci_sas_address port_attached_device_address; + struct sci_sas_address phy_sas_address; + struct sci_sas_address phy_attached_device_address; + + /* + * Since this phy can be a member of a wide port check to see if one or + * more phys match the sent and received SAS address as this phy in which + * case it should participate in the same port. + */ + sci_phy_get_sas_address(iphy, &phy_sas_address); + sci_phy_get_attached_sas_address(iphy, &phy_attached_device_address); + + for (i = 0; i < ihost->logical_port_entries; i++) { + struct isci_port *iport = &ihost->ports[i]; + + sci_port_get_sas_address(iport, &port_sas_address); + sci_port_get_attached_sas_address(iport, &port_attached_device_address); + + if (sci_sas_address_compare(port_sas_address, phy_sas_address) == 0 && + sci_sas_address_compare(port_attached_device_address, phy_attached_device_address) == 0) + return iport; + } + + return NULL; +} + +/** + * + * @controller: This is the controller object that contains the port agent + * @port_agent: This is the port configruation agent for the controller. + * + * This routine will validate the port configuration is correct for the SCU + * hardware. The SCU hardware allows for port configurations as follows. LP0 + * -> (PE0), (PE0, PE1), (PE0, PE1, PE2, PE3) LP1 -> (PE1) LP2 -> (PE2), (PE2, + * PE3) LP3 -> (PE3) enum sci_status SCI_SUCCESS the port configuration is valid for + * this port configuration agent. SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION + * the port configuration is not valid for this port configuration agent. + */ +static enum sci_status sci_port_configuration_agent_validate_ports( + struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent) +{ + struct sci_sas_address first_address; + struct sci_sas_address second_address; + + /* + * Sanity check the max ranges for all the phys the max index + * is always equal to the port range index */ + if (port_agent->phy_valid_port_range[0].max_index != 0 || + port_agent->phy_valid_port_range[1].max_index != 1 || + port_agent->phy_valid_port_range[2].max_index != 2 || + port_agent->phy_valid_port_range[3].max_index != 3) + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + + /* + * This is a request to configure a single x4 port or at least attempt + * to make all the phys into a single port */ + if (port_agent->phy_valid_port_range[0].min_index == 0 && + port_agent->phy_valid_port_range[1].min_index == 0 && + port_agent->phy_valid_port_range[2].min_index == 0 && + port_agent->phy_valid_port_range[3].min_index == 0) + return SCI_SUCCESS; + + /* + * This is a degenerate case where phy 1 and phy 2 are assigned + * to the same port this is explicitly disallowed by the hardware + * unless they are part of the same x4 port and this condition was + * already checked above. */ + if (port_agent->phy_valid_port_range[2].min_index == 1) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* + * PE0 and PE3 can never have the same SAS Address unless they + * are part of the same x4 wide port and we have already checked + * for this condition. */ + sci_phy_get_sas_address(&ihost->phys[0], &first_address); + sci_phy_get_sas_address(&ihost->phys[3], &second_address); + + if (sci_sas_address_compare(first_address, second_address) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* + * PE0 and PE1 are configured into a 2x1 ports make sure that the + * SAS Address for PE0 and PE2 are different since they can not be + * part of the same port. */ + if (port_agent->phy_valid_port_range[0].min_index == 0 && + port_agent->phy_valid_port_range[1].min_index == 1) { + sci_phy_get_sas_address(&ihost->phys[0], &first_address); + sci_phy_get_sas_address(&ihost->phys[2], &second_address); + + if (sci_sas_address_compare(first_address, second_address) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + } + + /* + * PE2 and PE3 are configured into a 2x1 ports make sure that the + * SAS Address for PE1 and PE3 are different since they can not be + * part of the same port. */ + if (port_agent->phy_valid_port_range[2].min_index == 2 && + port_agent->phy_valid_port_range[3].min_index == 3) { + sci_phy_get_sas_address(&ihost->phys[1], &first_address); + sci_phy_get_sas_address(&ihost->phys[3], &second_address); + + if (sci_sas_address_compare(first_address, second_address) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + } + + return SCI_SUCCESS; +} + +/* + * ****************************************************************************** + * Manual port configuration agent routines + * ****************************************************************************** */ + +/* verify all of the phys in the same port are using the same SAS address */ +static enum sci_status +sci_mpc_agent_validate_phy_configuration(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent) +{ + u32 phy_mask; + u32 assigned_phy_mask; + struct sci_sas_address sas_address; + struct sci_sas_address phy_assigned_address; + u8 port_index; + u8 phy_index; + + assigned_phy_mask = 0; + sas_address.high = 0; + sas_address.low = 0; + + for (port_index = 0; port_index < SCI_MAX_PORTS; port_index++) { + phy_mask = ihost->oem_parameters.ports[port_index].phy_mask; + + if (!phy_mask) + continue; + /* + * Make sure that one or more of the phys were not already assinged to + * a different port. */ + if ((phy_mask & ~assigned_phy_mask) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* Find the starting phy index for this round through the loop */ + for (phy_index = 0; phy_index < SCI_MAX_PHYS; phy_index++) { + if ((phy_mask & (1 << phy_index)) == 0) + continue; + sci_phy_get_sas_address(&ihost->phys[phy_index], + &sas_address); + + /* + * The phy_index can be used as the starting point for the + * port range since the hardware starts all logical ports + * the same as the PE index. */ + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + + if (phy_index != port_index) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + break; + } + + /* + * See how many additional phys are being added to this logical port. + * Note: We have not moved the current phy_index so we will actually + * compare the startting phy with itself. + * This is expected and required to add the phy to the port. */ + while (phy_index < SCI_MAX_PHYS) { + if ((phy_mask & (1 << phy_index)) == 0) + continue; + sci_phy_get_sas_address(&ihost->phys[phy_index], + &phy_assigned_address); + + if (sci_sas_address_compare(sas_address, phy_assigned_address) != 0) { + /* + * The phy mask specified that this phy is part of the same port + * as the starting phy and it is not so fail this configuration */ + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + + sci_port_add_phy(&ihost->ports[port_index], + &ihost->phys[phy_index]); + + assigned_phy_mask |= (1 << phy_index); + } + + phy_index++; + } + + return sci_port_configuration_agent_validate_ports(ihost, port_agent); +} + +static void mpc_agent_timeout(unsigned long data) +{ + u8 index; + struct sci_timer *tmr = (struct sci_timer *)data; + struct sci_port_configuration_agent *port_agent; + struct isci_host *ihost; + unsigned long flags; + u16 configure_phy_mask; + + port_agent = container_of(tmr, typeof(*port_agent), timer); + ihost = container_of(port_agent, typeof(*ihost), port_agent); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + port_agent->timer_pending = false; + + /* Find the mask of phys that are reported read but as yet unconfigured into a port */ + configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + struct isci_phy *iphy = &ihost->phys[index]; + + if (configure_phy_mask & (1 << index)) { + port_agent->link_up_handler(ihost, port_agent, + phy_get_non_dummy_port(iphy), + iphy); + } + } + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +static void sci_mpc_agent_link_up(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, + struct isci_port *iport, + struct isci_phy *iphy) +{ + /* If the port is NULL then the phy was not assigned to a port. + * This is because the phy was not given the same SAS Address as + * the other PHYs in the port. + */ + if (!iport) + return; + + port_agent->phy_ready_mask |= (1 << iphy->phy_index); + sci_port_link_up(iport, iphy); + if ((iport->active_phy_mask & (1 << iphy->phy_index))) + port_agent->phy_configured_mask |= (1 << iphy->phy_index); +} + +/** + * + * @controller: This is the controller object that receives the link down + * notification. + * @port: This is the port object associated with the phy. If the is no + * associated port this is an NULL. The port is an invalid + * handle only if the phy was never port of this port. This happens when + * the phy is not broadcasting the same SAS address as the other phys in the + * assigned port. + * @phy: This is the phy object which has gone link down. + * + * This function handles the manual port configuration link down notifications. + * Since all ports and phys are associated at initialization time we just turn + * around and notifiy the port object of the link down event. If this PHY is + * not associated with a port there is no action taken. Is it possible to get a + * link down notification from a phy that has no assocoated port? + */ +static void sci_mpc_agent_link_down( + struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, + struct isci_port *iport, + struct isci_phy *iphy) +{ + if (iport != NULL) { + /* + * If we can form a new port from the remainder of the phys + * then we want to start the timer to allow the SCI User to + * cleanup old devices and rediscover the port before + * rebuilding the port with the phys that remain in the ready + * state. + */ + port_agent->phy_ready_mask &= ~(1 << iphy->phy_index); + port_agent->phy_configured_mask &= ~(1 << iphy->phy_index); + + /* + * Check to see if there are more phys waiting to be + * configured into a port. If there are allow the SCI User + * to tear down this port, if necessary, and then reconstruct + * the port after the timeout. + */ + if ((port_agent->phy_configured_mask == 0x0000) && + (port_agent->phy_ready_mask != 0x0000) && + !port_agent->timer_pending) { + port_agent->timer_pending = true; + + sci_mod_timer(&port_agent->timer, + SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT); + } + + sci_port_link_down(iport, iphy); + } +} + +/* verify phys are assigned a valid SAS address for automatic port + * configuration mode. + */ +static enum sci_status +sci_apc_agent_validate_phy_configuration(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent) +{ + u8 phy_index; + u8 port_index; + struct sci_sas_address sas_address; + struct sci_sas_address phy_assigned_address; + + phy_index = 0; + + while (phy_index < SCI_MAX_PHYS) { + port_index = phy_index; + + /* Get the assigned SAS Address for the first PHY on the controller. */ + sci_phy_get_sas_address(&ihost->phys[phy_index], + &sas_address); + + while (++phy_index < SCI_MAX_PHYS) { + sci_phy_get_sas_address(&ihost->phys[phy_index], + &phy_assigned_address); + + /* Verify each of the SAS address are all the same for every PHY */ + if (sci_sas_address_compare(sas_address, phy_assigned_address) == 0) { + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + } else { + port_agent->phy_valid_port_range[phy_index].min_index = phy_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + break; + } + } + } + + return sci_port_configuration_agent_validate_ports(ihost, port_agent); +} + +static void sci_apc_agent_configure_ports(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, + struct isci_phy *iphy, + bool start_timer) +{ + u8 port_index; + enum sci_status status; + struct isci_port *iport; + enum SCIC_SDS_APC_ACTIVITY apc_activity = SCIC_SDS_APC_SKIP_PHY; + + iport = sci_port_configuration_agent_find_port(ihost, iphy); + + if (iport) { + if (sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) + apc_activity = SCIC_SDS_APC_ADD_PHY; + else + apc_activity = SCIC_SDS_APC_SKIP_PHY; + } else { + /* + * There is no matching Port for this PHY so lets search through the + * Ports and see if we can add the PHY to its own port or maybe start + * the timer and wait to see if a wider port can be made. + * + * Note the break when we reach the condition of the port id == phy id */ + for (port_index = port_agent->phy_valid_port_range[iphy->phy_index].min_index; + port_index <= port_agent->phy_valid_port_range[iphy->phy_index].max_index; + port_index++) { + + iport = &ihost->ports[port_index]; + + /* First we must make sure that this PHY can be added to this Port. */ + if (sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) { + /* + * Port contains a PHY with a greater PHY ID than the current + * PHY that has gone link up. This phy can not be part of any + * port so skip it and move on. */ + if (iport->active_phy_mask > (1 << iphy->phy_index)) { + apc_activity = SCIC_SDS_APC_SKIP_PHY; + break; + } + + /* + * We have reached the end of our Port list and have not found + * any reason why we should not either add the PHY to the port + * or wait for more phys to become active. */ + if (iport->physical_port_index == iphy->phy_index) { + /* + * The Port either has no active PHYs. + * Consider that if the port had any active PHYs we would have + * or active PHYs with + * a lower PHY Id than this PHY. */ + if (apc_activity != SCIC_SDS_APC_START_TIMER) { + apc_activity = SCIC_SDS_APC_ADD_PHY; + } + + break; + } + + /* + * The current Port has no active PHYs and this PHY could be part + * of this Port. Since we dont know as yet setup to start the + * timer and see if there is a better configuration. */ + if (iport->active_phy_mask == 0) { + apc_activity = SCIC_SDS_APC_START_TIMER; + } + } else if (iport->active_phy_mask != 0) { + /* + * The Port has an active phy and the current Phy can not + * participate in this port so skip the PHY and see if + * there is a better configuration. */ + apc_activity = SCIC_SDS_APC_SKIP_PHY; + } + } + } + + /* + * Check to see if the start timer operations should instead map to an + * add phy operation. This is caused because we have been waiting to + * add a phy to a port but could not becuase the automatic port + * configuration engine had a choice of possible ports for the phy. + * Since we have gone through a timeout we are going to restrict the + * choice to the smallest possible port. */ + if ( + (start_timer == false) + && (apc_activity == SCIC_SDS_APC_START_TIMER) + ) { + apc_activity = SCIC_SDS_APC_ADD_PHY; + } + + switch (apc_activity) { + case SCIC_SDS_APC_ADD_PHY: + status = sci_port_add_phy(iport, iphy); + + if (status == SCI_SUCCESS) { + port_agent->phy_configured_mask |= (1 << iphy->phy_index); + } + break; + + case SCIC_SDS_APC_START_TIMER: + /* + * This can occur for either a link down event, or a link + * up event where we cannot yet tell the port to which a + * phy belongs. + */ + if (port_agent->timer_pending) + sci_del_timer(&port_agent->timer); + + port_agent->timer_pending = true; + sci_mod_timer(&port_agent->timer, + SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION); + break; + + case SCIC_SDS_APC_SKIP_PHY: + default: + /* do nothing the PHY can not be made part of a port at this time. */ + break; + } +} + +/** + * sci_apc_agent_link_up - handle apc link up events + * @scic: This is the controller object that receives the link up + * notification. + * @sci_port: This is the port object associated with the phy. If the is no + * associated port this is an NULL. + * @sci_phy: This is the phy object which has gone link up. + * + * This method handles the automatic port configuration for link up + * notifications. Is it possible to get a link down notification from a phy + * that has no assocoated port? + */ +static void sci_apc_agent_link_up(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, + struct isci_port *iport, + struct isci_phy *iphy) +{ + u8 phy_index = iphy->phy_index; + + if (!iport) { + /* the phy is not the part of this port */ + port_agent->phy_ready_mask |= 1 << phy_index; + sci_apc_agent_configure_ports(ihost, port_agent, iphy, true); + } else { + /* the phy is already the part of the port */ + u32 port_state = iport->sm.current_state_id; + + /* if the PORT'S state is resetting then the link up is from + * port hard reset in this case, we need to tell the port + * that link up is recieved + */ + BUG_ON(port_state != SCI_PORT_RESETTING); + port_agent->phy_ready_mask |= 1 << phy_index; + sci_port_link_up(iport, iphy); + } +} + +/** + * + * @controller: This is the controller object that receives the link down + * notification. + * @iport: This is the port object associated with the phy. If the is no + * associated port this is an NULL. + * @iphy: This is the phy object which has gone link down. + * + * This method handles the automatic port configuration link down + * notifications. not associated with a port there is no action taken. Is it + * possible to get a link down notification from a phy that has no assocoated + * port? + */ +static void sci_apc_agent_link_down( + struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, + struct isci_port *iport, + struct isci_phy *iphy) +{ + port_agent->phy_ready_mask &= ~(1 << iphy->phy_index); + + if (!iport) + return; + if (port_agent->phy_configured_mask & (1 << iphy->phy_index)) { + enum sci_status status; + + status = sci_port_remove_phy(iport, iphy); + + if (status == SCI_SUCCESS) + port_agent->phy_configured_mask &= ~(1 << iphy->phy_index); + } +} + +/* configure the phys into ports when the timer fires */ +static void apc_agent_timeout(unsigned long data) +{ + u32 index; + struct sci_timer *tmr = (struct sci_timer *)data; + struct sci_port_configuration_agent *port_agent; + struct isci_host *ihost; + unsigned long flags; + u16 configure_phy_mask; + + port_agent = container_of(tmr, typeof(*port_agent), timer); + ihost = container_of(port_agent, typeof(*ihost), port_agent); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + port_agent->timer_pending = false; + + configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; + + if (!configure_phy_mask) + return; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if ((configure_phy_mask & (1 << index)) == 0) + continue; + + sci_apc_agent_configure_ports(ihost, port_agent, + &ihost->phys[index], false); + } + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +/* + * ****************************************************************************** + * Public port configuration agent routines + * ****************************************************************************** */ + +/** + * + * + * This method will construct the port configuration agent for operation. This + * call is universal for both manual port configuration and automatic port + * configuration modes. + */ +void sci_port_configuration_agent_construct( + struct sci_port_configuration_agent *port_agent) +{ + u32 index; + + port_agent->phy_configured_mask = 0x00; + port_agent->phy_ready_mask = 0x00; + + port_agent->link_up_handler = NULL; + port_agent->link_down_handler = NULL; + + port_agent->timer_pending = false; + + for (index = 0; index < SCI_MAX_PORTS; index++) { + port_agent->phy_valid_port_range[index].min_index = 0; + port_agent->phy_valid_port_range[index].max_index = 0; + } +} + +enum sci_status sci_port_configuration_agent_initialize( + struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent) +{ + enum sci_status status; + enum sci_port_configuration_mode mode; + + mode = ihost->oem_parameters.controller.mode_type; + + if (mode == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + status = sci_mpc_agent_validate_phy_configuration( + ihost, port_agent); + + port_agent->link_up_handler = sci_mpc_agent_link_up; + port_agent->link_down_handler = sci_mpc_agent_link_down; + + sci_init_timer(&port_agent->timer, mpc_agent_timeout); + } else { + status = sci_apc_agent_validate_phy_configuration( + ihost, port_agent); + + port_agent->link_up_handler = sci_apc_agent_link_up; + port_agent->link_down_handler = sci_apc_agent_link_down; + + sci_init_timer(&port_agent->timer, apc_agent_timeout); + } + + return status; +} |