diff options
Diffstat (limited to 'arch/x86/platform')
| -rw-r--r-- | arch/x86/platform/scx200/scx200_32.c | 24 | ||||
| -rw-r--r-- | arch/x86/platform/uv/uv_time.c | 6 |
2 files changed, 12 insertions, 18 deletions
diff --git a/arch/x86/platform/scx200/scx200_32.c b/arch/x86/platform/scx200/scx200_32.c index 7e004acbe52..7a9ad30d6c9 100644 --- a/arch/x86/platform/scx200/scx200_32.c +++ b/arch/x86/platform/scx200/scx200_32.c @@ -17,8 +17,6 @@ /* Verify that the configuration block really is there */ #define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base)) -#define NAME "scx200" - MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>"); MODULE_DESCRIPTION("NatSemi SCx200 Driver"); MODULE_LICENSE("GPL"); @@ -29,10 +27,10 @@ unsigned long scx200_gpio_shadow[2]; unsigned scx200_cb_base = 0; static struct pci_device_id scx200_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) }, - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) }, - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_XBUS) }, - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_XBUS) }, + { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) }, + { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) }, + { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_XBUS) }, + { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SC1100_XBUS) }, { }, }; MODULE_DEVICE_TABLE(pci,scx200_tbl); @@ -63,10 +61,11 @@ static int __devinit scx200_probe(struct pci_dev *pdev, const struct pci_device_ if (pdev->device == PCI_DEVICE_ID_NS_SCx200_BRIDGE || pdev->device == PCI_DEVICE_ID_NS_SC1100_BRIDGE) { base = pci_resource_start(pdev, 0); - printk(KERN_INFO NAME ": GPIO base 0x%x\n", base); + pr_info("GPIO base 0x%x\n", base); - if (!request_region(base, SCx200_GPIO_SIZE, "NatSemi SCx200 GPIO")) { - printk(KERN_ERR NAME ": can't allocate I/O for GPIOs\n"); + if (!request_region(base, SCx200_GPIO_SIZE, + "NatSemi SCx200 GPIO")) { + pr_err("can't allocate I/O for GPIOs\n"); return -EBUSY; } @@ -82,11 +81,11 @@ static int __devinit scx200_probe(struct pci_dev *pdev, const struct pci_device_ if (scx200_cb_probe(base)) { scx200_cb_base = base; } else { - printk(KERN_WARNING NAME ": Configuration Block not found\n"); + pr_warn("Configuration Block not found\n"); return -ENODEV; } } - printk(KERN_INFO NAME ": Configuration Block base 0x%x\n", scx200_cb_base); + pr_info("Configuration Block base 0x%x\n", scx200_cb_base); } return 0; @@ -111,8 +110,7 @@ u32 scx200_gpio_configure(unsigned index, u32 mask, u32 bits) static int __init scx200_init(void) { - printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n"); - + pr_info("NatSemi SCx200 Driver\n"); return pci_register_driver(&scx200_pci_driver); } diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c index 9f29a01ee1b..5032e0d19b8 100644 --- a/arch/x86/platform/uv/uv_time.c +++ b/arch/x86/platform/uv/uv_time.c @@ -37,7 +37,7 @@ static void uv_rtc_timer_setup(enum clock_event_mode, static struct clocksource clocksource_uv = { .name = RTC_NAME, - .rating = 400, + .rating = 299, .read = uv_read_rtc, .mask = (cycle_t)UVH_RTC_REAL_TIME_CLOCK_MASK, .flags = CLOCK_SOURCE_IS_CONTINUOUS, @@ -379,10 +379,6 @@ static __init int uv_rtc_setup_clock(void) if (!is_uv_system()) return -ENODEV; - /* If single blade, prefer tsc */ - if (uv_num_possible_blades() == 1) - clocksource_uv.rating = 250; - rc = clocksource_register_hz(&clocksource_uv, sn_rtc_cycles_per_second); if (rc) printk(KERN_INFO "UV RTC clocksource failed rc %d\n", rc); |