diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/RCU/checklist.txt | 6 | ||||
| -rw-r--r-- | Documentation/RCU/stallwarn.txt | 16 | ||||
| -rw-r--r-- | Documentation/RCU/whatisRCU.txt | 9 |
3 files changed, 21 insertions, 10 deletions
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt index fc103d7a047..cdb20d41a44 100644 --- a/Documentation/RCU/checklist.txt +++ b/Documentation/RCU/checklist.txt @@ -310,6 +310,12 @@ over a rather long period of time, but improvements are always welcome! code under the influence of preempt_disable(), you instead need to use synchronize_irq() or synchronize_sched(). + This same limitation also applies to synchronize_rcu_bh() + and synchronize_srcu(), as well as to the asynchronous and + expedited forms of the three primitives, namely call_rcu(), + call_rcu_bh(), call_srcu(), synchronize_rcu_expedited(), + synchronize_rcu_bh_expedited(), and synchronize_srcu_expedited(). + 12. Any lock acquired by an RCU callback must be acquired elsewhere with softirq disabled, e.g., via spin_lock_irqsave(), spin_lock_bh(), etc. Failing to disable irq on a given diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt index 523364e4e1f..1927151b386 100644 --- a/Documentation/RCU/stallwarn.txt +++ b/Documentation/RCU/stallwarn.txt @@ -99,7 +99,7 @@ In kernels with CONFIG_RCU_FAST_NO_HZ, even more information is printed: INFO: rcu_preempt detected stall on CPU - 0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 drain=0 . timer=-1 + 0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 drain=0 . timer not pending (t=65000 jiffies) The "(64628 ticks this GP)" indicates that this CPU has taken more @@ -116,13 +116,13 @@ number between the two "/"s is the value of the nesting, which will be a small positive number if in the idle loop and a very large positive number (as shown above) otherwise. -For CONFIG_RCU_FAST_NO_HZ kernels, the "drain=0" indicates that the -CPU is not in the process of trying to force itself into dyntick-idle -state, the "." indicates that the CPU has not given up forcing RCU -into dyntick-idle mode (it would be "H" otherwise), and the "timer=-1" -indicates that the CPU has not recented forced RCU into dyntick-idle -mode (it would otherwise indicate the number of microseconds remaining -in this forced state). +For CONFIG_RCU_FAST_NO_HZ kernels, the "drain=0" indicates that the CPU is +not in the process of trying to force itself into dyntick-idle state, the +"." indicates that the CPU has not given up forcing RCU into dyntick-idle +mode (it would be "H" otherwise), and the "timer not pending" indicates +that the CPU has not recently forced RCU into dyntick-idle mode (it +would otherwise indicate the number of microseconds remaining in this +forced state). Multiple Warnings From One Stall diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 69ee188515e..bf0f6de2aa0 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -873,7 +873,7 @@ d. Do you need to treat NMI handlers, hardirq handlers, and code segments with preemption disabled (whether via preempt_disable(), local_irq_save(), local_bh_disable(), or some other mechanism) as if they were explicit RCU readers? - If so, you need RCU-sched. + If so, RCU-sched is the only choice that will work for you. e. Do you need RCU grace periods to complete even in the face of softirq monopolization of one or more of the CPUs? For @@ -884,7 +884,12 @@ f. Is your workload too update-intensive for normal use of RCU, but inappropriate for other synchronization mechanisms? If so, consider SLAB_DESTROY_BY_RCU. But please be careful! -g. Otherwise, use RCU. +g. Do you need read-side critical sections that are respected + even though they are in the middle of the idle loop, during + user-mode execution, or on an offlined CPU? If so, SRCU is the + only choice that will work for you. + +h. Otherwise, use RCU. Of course, this all assumes that you have determined that RCU is in fact the right tool for your job. |