Age | Commit message (Collapse) | Author | Files | Lines |
|
with locks held.
|
|
dev->lock.hw_lock is already set. This fixes the case of two X Servers
running on the same head on different VTs with interface 1.1, by making
the 2nd head fail to inizialize like before.
|
|
|
|
a busid that doesn't correspond to the device the DRM is attached to.
This is a breaking of backwards-compatibility only for the
multiple-DRI-head case with X Servers that don't use interface 1.1.
- Move irq_busid to drm_irq.h and make it only return the IRQ for the
current device. Retains compatibility with previous X Servers, cleans
up unnecessary code. This means no irq_busid on !__HAVE_IRQ, but can be
changed if necessary.
- Bump interface version to 1.2. This version when set signifies that the
control ioctl should ignore the irq number passed in and enable the
interrupt handler for the attached device. Otherwise it errors out when
the passed-in irq is not equal to the device's.
- Store the highest version the interface has been set to in the device.
- Fix a recursion on DRM_LOCK in irq_uninstall on FreeBSD. This leaves
irq_uninstall being done without the lock in some cases, but it was
racey anyways.
|
|
|
|
both Linux and *BSD.
|
|
|
|
the 2D driver initializes MC_FB_LOCATION and related registers sanely
the DRM deduces the layout from these registers
clients use the new SETPARAM ioctl to tell the DRM where they think the
framebuffer is located in the card's address space
the DRM uses all this information to check client state and fix it up if
necessary
This is a prerequisite for things like direct rendering with IGP chips and
video capturing.
|
|
change.
|
|
in bufs_info sysctl handler. dev->dma and dev->dma_lock existence are
protected by DRM_LOCK(). Fixes panic on sysctl hw.dri when the device
is uninitialied (when you aren't in X).
|
|
|
|
server or client to notify the DRM that it expects a certain version of
the device dependent or device independent interface. If the major
doesn't match or minor is too large, EINVAL is returned. A major of -1
means that the requestor doesn't care about that portion of the
interface. The ioctl returns the actual versions in the same struct.
- Introduce DRM DI interface version 1.1. If the server requests version
1.1, then the DRM sets the unique itself according to the busid of the
device it probed, which may then be accessed as normal using getunique.
- Request version 1.1 in libdrm's drmOpenByBusID, allowing the X Server to
request based on a BusID. Introduce a wrapper for DRM_IOCTL_SET_VERSION
and bump libdrm minor version.
- Pass the busid in DRIScreenInit if libdrm can handle both a busid and
name. This allows drmOpenByBusID to be used to find the DRM instead of
just the driver name, which allows us in the future to tie a DRM more
strongly to the device it probed to. Introduce a function
DRICreatePCIBusID which creates a busid in the form pci:oooo:bb:dd.f
similar to linux's pci_name() function. This matches the format used by
the DRM in version 1.1. libdrm knows how to match both this format and
the old PCI:b:d:f format.
- Use the new DRICreatePCIBusID function in the *_dri.c to request the new,
more exact busid format.
|
|
get the drm_file_t * based on the filp passed in ioctl handlers.
- Use this macro on BSD for simplification and improve its error reporting.
Make failure to find the drm_file_t * print as an error, not debug.
This failure may be part of the problem with KDE.
- Make debug and error print macros include the pid on BSD.
|
|
!__HAVE_DMA case.
|
|
data into temporary variables with the lock held then outputting to
sysctls with the lock released. Rearranged a little extra code to aid
this. Note that drm_memory_debug.h hasn't had this fix applied, but I
consider that code to be just about dead anyway.
|
|
shot.
|
|
used by root (the X Server) which are not locked. However, it should
deal with lost-IRQ issues on -current which I think people have been
experiencing but I am unable to reproduce (though I understand why they
would occur, because of a bug of mine). Note that most of the locking
(DRM_LOCK()/UNLOCK()) is all covered by Giant still, so it doesn't
matter yet.
- Remove locking on FreeBSD-stable and NetBSD. These are covered by the
fact that there is no reentrancy of the kernel except by interrupts,
which are locked using spldrm()/splx() instead.
|
|
M_ZERO.
|
|
from __HAVE_DMA. This will be useful for adding vblank sync support to
sis and tdfx. Rename dma_service to irq_handler, which is more
accurately what it is.
- Fix the #if _HAVE_DMA_IRQ in radeon, r128, mga, i810, i830, gamma to have
the right number of underscores. This may have been a problem in the
case that the server died without doing its DRM_IOCTL_CONTROL to
uninit.
|
|
just a single instance. Moved the PCI ID lists from <card>_drv.c in BSD
to <card>.h. The PCI ID lists include a driver private field, which may
be used by drivers for chip family or other information. Based on work
by jonsmirl.
- Make tdfx_drv.c and tdfx.h match other drivers.
- Fixed up linking of sis shared files.
Tested with Radeon and SiS on Linux and FreeBSD, including a Linux setup
with
2 SiS cards in a machine, but only one head being used (with DRI)
|
|
tests, excessive indenation, convoluted handling of errors, or code
duplication.
|
|
effects, so make them look like functions (add parenthesis).
|
|
I've touched enough of the code here, and there was no previous
copyright. Do some drive-by style fixes while I'm here.
|
|
|
|
Change some nearby memset()s to bzero()s or to calloc allocations to
take advantage of M_ZERO). Reverse some error tests to reduce high
levels of indentation. Move the sg_cleanup() call out of the maplist
loop in DRM(takedown)-- I can't see any need for it to be inside.
|
|
Obtained from: i865-agp-0-1-branch
|
|
i810 AGP module, working around the limitation of one driver per
device.
Obtained from: i865-0-1-branch
|
|
4.x
|
|
|
|
|
|
|
|
Obtained from: FreeBSD CVS
|
|
|
|
allocate framebuffer memory without sisfb, and a new ioctl to be used
by the X Server which tells the DRM what region of framebuffer memory
to allocate from. Also fixes a possibility to panic the kernel I
believe. Tested on linux with sisfb and FreeBSD (without sisfb) with
new DRI only.
|
|
advantage of M_ZERO on BSDs.
|
|
|
|
|
|
|
|
done through perforce.
- Add copyright headers to drm_os_*bsd.h, still need to research the other
copyright-less files better.
|
|
it to bzero (which it was always used for).
|
|
i830 build fix
|
|
|
|
the i830 driver or the BSDs. :)
|
|
(resync with XFree86 trunk)
|
|
the CPU (David Mosberger, Benjamin Herrenschmidt, myself, Paul
Mackerras, Jeff Wiedemeier)
|
|
_UPDATE.
|
|
|
|
|
|
DRM_*MEMORYBARRIER we had were related to an MMIO space. This means
arch-specific code on the BSDs, unfortunately. Also add
DRM_MEMORYBARRIER() and change the DRM_READMEMORYBARRIER()s that used
to be read/write barriers to it.
|
|
|