summaryrefslogtreecommitdiff
path: root/randr/rrproperty.c
AgeCommit message (Collapse)AuthorFilesLines
2010-02-12Don't double-swap the RandR PropertyNotify eventPeter Harris1-5/+0
The event is already swapped in randr.c/SRROutputPropertyNotifyEvent, so it should not be swapped here. X.Org Bugzilla #26511: http://bugs.freedesktop.org/show_bug.cgi?id=26511 Tested-by: Leonardo Chiquitto <leonardo@ngdn.org> Acked-by: Adam Jackson <ajax at redhat.com> Reviewed-by: Julien Cristau <jcristau at debian.org> Signed-off-by: Peter Harris <pharris@opentext.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2009-09-20RRDestroyOutputProperty: Free randr property valid valuesKeith Packard1-0/+2
These were leaked when the property was destroyed. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2009-07-14randr: switch to byte counting functionsPeter Hutterer1-4/+4
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2009-04-29Fix most remaining deprecated resource lookups.Eamon Walsh1-24/+9
Callsites updated to use dixLookupResourceBy{Type,Class}. TODO: Audit access modes to make sure they reflect the usage.
2008-12-03Rework symbol visibility for easier maintenancePaulo Cesar Pereira de Andrade1-13/+13
Save in a few special cases, _X_EXPORT should not be used in C source files. Instead, it should be used in headers, and the proper C source include that header. Some special cases are symbols that need to be shared between modules, but not expected to be used by external drivers, and symbols that are accessible via LoaderSymbol/dlopen. This patch also adds conditionally some new sdk header files, depending on extensions enabled. These files were added to match pattern for other extensions/modules, that is, have the headers "deciding" symbol visibility in the sdk. These headers are: o Xext/panoramiXsrv.h, Xext/panoramiX.h o fbpict.h (unconditionally) o vidmodeproc.h o mioverlay.h (unconditionally, used only by xaa) o xfixes.h (unconditionally, symbols required by dri2) LoaderSymbol and similar functions now don't have different prototypes, in loaderProcs.h and xf86Module.h, so that both headers can be included, without the need of defining IN_LOADER. xf86NewInputDevice() device prototype readded to xf86Xinput.h, but not exported (and with a comment about it).
2008-12-01randr: Don't send output property events on server exitAdam Jackson1-1/+2
If the Window resource type is already gone, there's no point in trying to send events, all it can do is access already-freed memory. Relevant thread: http://lists.freedesktop.org/archives/xorg/2008-November/040443.html
2008-11-29Export symbols defined in the sdk.Paulo Cesar Pereira de Andrade1-13/+13
This is the biggest "visibility" patch. Instead of doing a "export" symbol on demand, export everything in the sdk, so that if some module fails due to an unresolved symbol, it is because it is using a symbol not in the sdk. Most exported symbols shouldn't really be made visible, neither advertised in the sdk, as they are only used by a single shared object. Symbols in the sdk (or referenced in sdk macros), but not defined anywhere include: XkbBuildCoreState() XkbInitialMap XkbXIUnsupported XkbCheckActionVMods() XkbSendCompatNotify() XkbDDXFakePointerButton() XkbDDXApplyConfig() _XkbStrCaseCmp() _XkbErrMessages[] _XkbErrCode _XkbErrLocation _XkbErrData XkbAccessXDetailText() XkbNKNDetailMaskText() XkbLookupGroupAndLevel() XkbInitAtoms() XkbGetOrderedDrawables() XkbFreeOrderedDrawables() XkbConvertXkbComponents() XkbWriteXKBSemantics() XkbWriteXKBLayout() XkbWriteXKBKeymap() XkbWriteXKBFile() XkbWriteCFile() XkbWriteXKMFile() XkbWriteToServer() XkbMergeFile() XkmFindTOCEntry() XkmReadFileSection() XkmReadFileSectionName() InitExtInput() xf86CheckButton() xf86SwitchCoreDevice() RamDacSetGamma() RamDacRestoreDACValues() xf86Bpp xf86ConfigPix24 xf86MouseCflags[] xf86SupportedMouseTypes[] xf86NumMouseTypes xf86ChangeBusIndex() xf86EntityEnter() xf86EntityLeave() xf86WrapperInit() xf86RingBell() xf86findOptionBoolean() xf86debugListOptions() LoadSubModuleLocal() LoaderSymbolLocal() getInt10Rec() xf86CurrentScreen xf86ReallocatePciResources() xf86NewSerialNumber() xf86RandRSetInitialMode() fbCompositeSolidMask_nx1xn fbCompositeSolidMask_nx8888x0565C fbCompositeSolidMask_nx8888x8888C fbCompositeSolidMask_nx8x0565 fbCompositeSolidMask_nx8x0888 fbCompositeSolidMask_nx8x8888 fbCompositeSrc_0565x0565 fbCompositeSrc_8888x0565 fbCompositeSrc_8888x0888 fbCompositeSrc_8888x8888 fbCompositeSrcAdd_1000x1000 fbCompositeSrcAdd_8000x8000 fbCompositeSrcAdd_8888x8888 fbGeneration fbIn fbOver fbOver24 fbOverlayGeneration fbRasterizeEdges fbRestoreAreas fbSaveAreas composeFunctions VBEBuildVbeModeList() VBECalcVbeModeIndex() TIramdac3030CalculateMNPForClock() shadowBufPtr shadowFindBuf() miRRGetScreenInfo() RRSetScreenConfig() RRModePruneUnused() PixmanImageFromPicture() extern int miPointerGetMotionEvents() miClipPicture() miRasterizeTriangle() fbPush1toN() fbInitializeBackingStore() ddxBeforeReset() SetupSprite() InitSprite() DGADeliverEvent() SPECIAL CASES o defined as _X_INTERNAL xf86NewInputDevice() o defined as static fbGCPrivateKey fbOverlayScreenPrivateKey fbScreenPrivateKey fbWinPrivateKey o defined in libXfont.so, but declared in xorg/dixfont.h GetGlyphs() QueryGlyphExtents() QueryTextExtents() ParseGlyphCachingMode() InitGlyphCaching() SetGlyphCachingMode()
2008-11-25Move matrix operations from X server to pixman 0.13.2Keith Packard1-2/+2
pixman 0.13.2 now holds all of the matrix operations. This leaves the protocol conversion routines and some ABI stubs in place Signed-off-by: Keith Packard <keithp@keithp.com>
2008-10-16RANDR: Fix output property event delivery.Pierre Willenbrock1-0/+6
2008-10-06RANDR: Delivery output property events.Keith Packard1-6/+32
2008-08-21Add swapped dispatch for randr 1.2 requestsJulien Cristau1-7/+51
2008-03-06Allow RandR get output property to call into driversJesse Barnes1-6/+13
In order to report accurate values to users of the RandR property interface, it's sometimes necessary to ask the driver to update the value (for example when backlight brightness changes without the server's knowledge, due to hotkey events or direct sysfs banging). This patch wires up the core server code with a new xf86CrtcFuncs callback, get_property, to allow for this. The new code is available under the RANDR_13_INTERFACE define, which in turn depends on the RANDR_12_INTERFACE code.
2007-11-05RandR: Remove usage of allocaDaniel Stone1-2/+2
Replace with heap allocations.
2007-03-24Make pending properties force mode set. And, remove AttachScreen calls.Keith Packard1-35/+54
Yes, two changes in one commit. Sorry 'bout that. The first change ensures that when pending property values have been changed, a mode set to the current mode will actually do something, rather than being identified as a no-op. In addition, the driver no longer needs to manage the migration of pending to current values, that is handled both within the xf86 mode setting code (to deal with non-RandR changes) as well as within the RandR extension itself. The second change eliminates the two-call Create/AttachScreen stuff that was done in a failed attempt to create RandR resources before the screen structures were allocated. Merging these back into the Create function is cleaner. (cherry picked from commit 57e87e0d006cbf1f5b175fe02eeb981f741d92f0) Conflicts: randr/randrstr.h randr/rrcrtc.c I think master and server-1.3-branch are more in sync now.
2007-03-23Incorrect extra memory copy in RRChangeOutputProperty.Keith Packard1-2/+0
Left over from previous version of the code, this memmove will break when the mode is not Replace. (cherry picked from commit 945aa0aa556429b50dea8e8ebc0008304b093eb7)
2007-03-23Fix Pending property API, adding RRPostPendingProperty.Keith Packard1-57/+94
Pending Properties take effect when the driver says they do, so provide an API to tell DIX when a property effect is made. Also, allow driver to reject property values in RRChangeOutputProperty. (cherry picked from commit 8eb288fbd69e2ffd02521d2c6a964c8180d08ec8)
2007-02-17RRConfigureOutputProperty is a variable length request.Keith Packard1-1/+1
Replace REQUEST_SIZE_MATCH with REQUEST_AT_LEAST_SIZE
2007-01-16When changing a non-pending property, call the screen rrOutputSetProperty hook.Eric Anholt1-0/+8
2007-01-16Don't forget to add the property we configure to the properties list.Eric Anholt1-0/+6
2006-12-14Naming change: Security*Access -> Dix*AccessEamon Walsh1-7/+7
2006-12-02RandR ListOutputProperties has nAtoms element, not nPropertiesKeith Packard1-1/+1
Earlier RandR 1.2 encoding revisions used 8-bit nProperties field. Final RandR 1.2 spec uses 16-bit nAtoms field instead. (cherry picked from 66b6358a393972946f16394918db2401c51dc5ed commit)
2006-11-28Allocate correct size for RRPropertyRec (oops).Keith Packard1-1/+2
Neglected to change the allocation size from sizeof (PropertyRec) to sizeof (RRPropertyRec). Lots of fun crashes this way. (cherry picked from commit 0626eb8e5c9fa05de6bdc9aa0c654f5148bf7cff)
2006-11-28Change RandR property datatype to include pending/valid values.Keith Packard1-89/+281
This patch tracks the protocol changes which introduce more complex semantics for RandR output properties including pending and valid value information. (cherry picked from commit af55c65bea40669fdc038aa34c6a1ec9ecb33e87)
2006-10-13Limit pointer to valid crtc areas. Add event swapping. Fix change tracking.Keith Packard1-0/+1
Add function to keep pointer within valid crtc areas. Finish event delivery and swapping code. Separate configuration from layout changes to send correct events.
2006-09-20Steal Xinerama code from SiS driver. Add missing files.Keith Packard1-0/+430
Provide a Xinerama implementation when DIX version isn't enabled. This version exposes each crtc as a separate 'screen' and reports the size of that patch. The extension also sends ConfigureNotify events to the root window whenever crtcs change so that applications will re-fetch xinerama information. This actually works for metacity.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 22:03:24 +0000