Age | Commit message (Collapse) | Author | Files | Lines |
|
And that's it! No more clientErrorValue kludge.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
Use the values from xproto rather than duplicating the effort
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
This doesn't change any behavior, but it isn't clear whether NullClient
is correct in all cases. As ajax says,
> For most of these changes, I think it's correct to use NullClient,
> since they are server-initiated changes and should not fail for (eg)
> xace reasons. ... At any rate, you're certainly not changing any
> semantics by leaving them all as NullClient, so this patch can't be
> more wrong than before.
The call in CreateGC is particularly questionable.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
|
|
This doesn't change any behavior, but it isn't clear whether NullClient
is correct in all cases. As ajax says,
> For most of these changes, I think it's correct to use NullClient,
> since they are server-initiated changes and should not fail for (eg)
> xace reasons. ... At any rate, you're certainly not changing any
> semantics by leaving them all as NullClient, so this patch can't be
> more wrong than before.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
|
|
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
|
|
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
|
|
Previously the callers were only setting errorValue on Success, when
it's ignored, and leaving it alone on failure, when it's sent to the
client.
Since SetFontPath takes the ClientPtr, let it set client->errorValue
instead of letting the callers continue to get it wrong.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
C89 guarantees alignment of pointers returned from malloc/calloc/realloc, so
stop fiddling with alignment manually and just pass the arguments to library
functions.
Also convert silent error when negative size is passed into function into
warning in log file.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
|
|
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Tested-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Signed-off-by: Adam Tkac <atkac@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
With Xinerama enabled, event coordinates are relative to Screen 0, so
they can be negative. The new DeviceEvent's coordinates are of type
uint16_t, making screens above and to the left of Screen 0 unusable.
X.Org Bug 24986 <https://bugs.freedesktop.org/show_bug.cgi?id=24986>
Signed-off-by: Chris Humbert <freedesktop@mahadri.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
In the process, fixes a memory leak in CloseDevice, and an unchecked
memory allocation in InitializePredictableAccelerationProperties.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
|
|
Needed as the privates stuff uses the callbacks before they would have
been defined in dix.h
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
|
|
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
|
|
The functions exported by the devPrivates code were poorly documented. I tried
to spruce it up a little.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
|
|
Bizarre. This seems to never be used before. I left the field in ScreenInfo,
with another name. So, stop looking at it.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
|
|
Conflicts:
exa/exa.c
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
This should be removed together with 49b93df8.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
|
|
The rationale behind is because no sane application will use this when we have
modern APIs such DRI2. Besides, as a fact, xfree86 server has already
deprecated this extension in 1998:
http://www.xfree86.org/3.3.6/isc7.html
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
This patch was created with:
git ls-files '*.[ch]' | while read f; do unifdef -B -DRENDER -o $f $f; done
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
The name XkbDDXFakeDeviceButton and XkbDDXFakeDeviceMotion is somewhat
misleading, there's no DDX involved in the game at all anymore.
This removes XkbFakeDeviceMotion and XkbFakeDeviceButton from the API where
it arguably shouldn't have been in the first place.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
|
|
Section 4.6.1 of the XKB spec says that "the initial event always moves the
cursor the distance specified in the action [...]", so skip the
POINTER_ACCELERATE flag for GPE, it would cause double-acceleration.
Potential regression - GPE expects the coordinates to be either relative or
both. XKB in theory allows for x to be relative and y to be absolute (or
vice versa). Let's pretend that scenario has no users.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
|
|
generate_modkeymap functions from Xorg.
Those functions are used by TigerVNC libvnc.so module which doesn't
use standard XInput infrastructure but uses same functions like,
for example, XTest devices.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
|
|
Update our supported DRI2 protocol version as each driver does
DRI2ScreenInit, since depending on available kernel features, each DDX
may support different callbacks and therefore protocol.
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
Signed-off-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
|
|
Allow the default log location to be configurable (e.g. /var/log),
and use separate logs for each display instance (e.g. XWin.0.log).
Make the type of g_pszLogFile const char*, per os/log.c:LogInit().
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
|
|
Borrowed from i830.h, except for list_for_each_entry().
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
|
|
Executed from the ConfigureWindow request, right before sending
ConfigureNotify to the clients.
This commit breaks the ScreenRec ABI.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
|
|
Reintroduce a check which used to be there in the old
ProcessKeyboardEvent/ProcessPointerEvent codepath, which avoids us
recording events subject to a grab twice: once when it's first processed
in EnqueueEvent, and then again when it's thawed and being replayed.
This required a tiny amount of code motion to expose syncEvents.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Also remove HAVE_NETLINK_AVC_ACQUIRE_FD tests, because we now
require a version of libselinux that has it.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
|
|
RECORD was disabled during the switch to internal events. This patch
modifies the record callback to work with internal events instead of
xEvents. The InternalEvents are converted to core/Xi events as needed.
Since record is a loadable extension, the EventTo* calls must be externed.
Signed-off-by: Chris Dekter <cdekter@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Rami Ylimaki <ext-rami.ylimaki@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
The only DDX currently using hotplugging is the xfree86 one and it looks
like it'll stay that way for a bit. Move the initialization to the DDX,
since Xephyr, Xnest, and friends don't need HAL or udev notifications.
Add CloseInput (counterpart to InitInput) to be able to clean up the config
initialization from the DDX as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
|
|
|
|
Tags may be a list of comma-separated strings that match against a MatchTag
InputClass section. If any of the tags specified for a device match against
the MatchTag of the section, this match is evaluated true and passed on to
the next match condition.
Tags are specified as "input.tags" (hal) or "ID_INPUT.tags" (udev), the
value of the tags is case-sensitive and require an exact match (not a
substring match).
i.e. "quirk" will not match "QUIRK", "need_quirk" or "quirk_needed".
Example configuration:
udev:
ENV{ID_INPUT.tags}="foo,bar"
hal:
<merge key="input.tags" type="string">foo,bar</merge>
xorg.conf:
Section "InputClass"
Identifier "foobar quirks"
MatchTag "foo|foobar"
Option "Foobar" "on"
EndSection
Where the xorg.conf section matches against any device with the tag "foo"
or tag "foobar" set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
|
|
Move tokenize out of the parser, make it a dix util function instead.
Splitting a string into multiple substrings is useful by other places, so
let's use it across the line. Future users include config/hal, config/udev
and of course the parser.
Example usage:
char **substrings = xstrtokenize(my_string, "\n");
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
|
|
Thoses definitions have been included in the kernel but the X server is not updated accordingly.
Without these definitions, the multitouch axes are not correctly labelled.
Signed-off-by: Benjamin Tissoires <tissoire@cena.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Look for system.Xwinrc in SYSCONFDIR/X11 (usually /etc/X11)
Rename sample system.Xwinrc file not to have a X11R6 path in it's name
Add makefile install rule for system.XWinrc
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
|