Man page formatting and typo fixes

1 files changed, 55 insertions, 55 deletions

diff --git a/xrandr.man b/xrandr.man
index 228ec94..6a9da17 100644
--- a/xrandr.man
+++ b/xrandr.man
@@ -26,132 +26,132 @@
 xrandr \- primitive command line interface to RandR extension
 .SH SYNOPSIS
 .B "xrandr"
-[-help]  [-display \fIdisplay\fP]
-[-q] [-v]
-[--verbose]
-[--screen \fIsnum\fP]
+[\-help]  [\-display \fIdisplay\fP]
+[\-q] [\-v]
+[\-\-verbose]
+[\-\-screen \fIsnum\fP]
 .br
 .B RandR version 1.2 options
 .br
-[--prop]
-[--fb <width>x<height>]
-[--fbmm <width>x<height>]
-[--dpi <dpi>]
+[\-\-prop]
+[\-\-fb <width>x<height>]
+[\-\-fbmm <width>x<height>]
+[\-\-dpi <dpi>]
 .br
 .B Per-output options
 .br
-[--output <output>]
-[--auto]
-[--mode <mode>]
-[--preferred]
-[--pos <x>x<y>]
-[--rate <rate>]
-[--reflect \fIreflection\fP]
-[--rotate \fIorientation\fP]
-[--left-of <output>\]
-[--right-of <output>\]
-[--above <output>\]
-[--below <output>\]
-[--off]
-[--crtc <crtc>]
+[\-\-output <output>]
+[\-\-auto]
+[\-\-mode <mode>]
+[\-\-preferred]
+[\-\-pos <x>x<y>]
+[\-\-rate <rate>]
+[\-\-reflect \fIreflection\fP]
+[\-\-rotate \fIorientation\fP]
+[\-\-left\-of <output>\]
+[\-\-right\-of <output>\]
+[\-\-above <output>\]
+[\-\-below <output>\]
+[\-\-off]
+[\-\-crtc <crtc>]
 .br
 .B RandR version 1.0 and version 1.1 options
 .br
-[-o \fIorientation\fP]
-[-s \fIsize\fP]
-[-x] [-y]
+[\-o \fIorientation\fP]
+[\-s \fIsize\fP]
+[\-x] [\-y]
 .SH DESCRIPTION
 .I Xrandr
 is used to set the size, orientation and/or reflection of the outputs for a
 screen. It can also set the screen size.
 There are a few global options; the rest modify a particular output and
 follow the specification of that output on the command line.
-.IP --help
+.IP \-\-help
 Print out a summary of the usage and exit.
-.IP -v
+.IP \-v
 Print out the RandR version reported by the X server and exit.
-.IP --verbose
-causes xrandr to be more verbose. When used with -q (or without other
+.IP \-\-verbose
+causes xrandr to be more verbose. When used with \-q (or without other
 options), xrandr will display more information about the server state. When
 used along with options that reconfigure the system, progress will be
 reported while executing the configuration changes.
-.IP -q
+.IP \-q
 When this option is present, or when no configuration changes are requested,
 xrandr will display the current state of the system.
-.IP "-screen \fIsnum\fP"
+.IP "\-screen \fIsnum\fP"
 This option selects which screen to manipulate. Note this refers to the X
 screen abstraction, not the monitor (or output).
 .SH "RandR version 1.2 options"
 These options are only available for X server supporting RandR version 1.2
 or newer.
-.IP --prop
+.IP \-\-prop
 This option causes xrandr to display the contents of properties for each
-output. --verbose also enables --prop.
-.IP "--fb <width>x<height"
+output. \-\-verbose also enables \-\-prop.
+.IP "\-\-fb <width>x<height>"
 Reconfigures the screen to the specified size. All configured monitors must
 fit within this size. When this option is not provided, xrandr computes the
 smallest screen size that will hold the set of configured outputs; this
 option provides a way to override that behaviour.
-.IP "--fbmm <width>x<height"
+.IP "\-\-fbmm <width>x<height>"
 Sets the reported values for the physical size of the screen. Normally,
 xrandr resets the reported physical size values to keep the DPI constant.
 This overrides that computation.
-.IP "--dpi <dpi>"
+.IP "\-\-dpi <dpi>"
 This also sets the reported physical size values of the screen, it uses the
 specified DPI value to compute an appropriate physical size using whatever
 pixel size will be set.
 .PP
 .B "Per-output options"
-.IP "--output <output>"
+.IP "\-\-output <output>"
 Selects an output to reconfigure. Use either the name of the output or the
 XID.
-.IP --auto
+.IP \-\-auto
 For connected but disabled outputs, this will enable them using their
 preferred mode (or, something close to 96dpi if they have no preferred
 mode). For disconnected but enabled outputs, this will disable them.
-.IP "--mode <mode>"
+.IP "\-\-mode <mode>"
 This selects a mode. Use either the name or the XID for <mode>
-.IP "--preferred"
-This selects the same mode as --auto, but it doesn't automatically enable or
+.IP "\-\-preferred"
+This selects the same mode as \-\-auto, but it doesn't automatically enable or
 disable the output.
-.IP "--pos <x>x<y>"
+.IP "\-\-pos <x>x<y>"
 Position the output within the screen using pixel coordinates.
-.IP "--rate <rate>
+.IP "\-\-rate <rate>"
 This marks a preference for refresh rates close to the specified value, when
 multiple modes have the same name, this will select the one with the nearest
 refresh rate.
-.IP "--reflect \fIreflection\fP"
+.IP "\-\-reflect \fIreflection\fP"
 Reflection can be one of 'normal' 'x', 'y' or 'xy'. This causes the output
 contents to be reflected across the specified axes.
-.IP "--rotate \fIrotation\fP"
+.IP "\-\-rotate \fIrotation\fP"
 Rotation can be one of 'normal', 'left', 'right' or 'inverted'. This causes
 the output contents to be rotated in the specified direction.
-.IP "--left-of, --right-of, --above, --below <another output>"
+.IP "\-\-left-of, \-\-right-of, \-\-above, \-\-below <another output>"
 Use one of these options to position the output relative to the position of
 another output. This allows convenient tiling of outputs within the screen.
 The position is always computed relative to the new position of the other
-output, so it is not valid to say --output a --left-of b --output 
-b --left-of a.
-.IP "--off"
+output, so it is not valid to say \-\-output a \-\-left-of b \-\-output 
+b \-\-left-of a.
+.IP "\-\-off"
 Disables the output.
-.IP "--crtc <crtc>"
+.IP "\-\-crtc <crtc>"
 Uses the specified crtc (either as an index in the list of CRTCs or XID).
 In normal usage, this option is not required as xrandr tries to make
 sensible choices about which crtc to use with each output. When that fails
 for some reason, this option can override the normal selection.
 .PP
 .SH "RandR version 1.1 options"
-These options are available for X server supporting RandR version 1.1 or
+These options are available for X servers supporting RandR version 1.1 or
 older. They are still valid for newer X servers, but they don't 
-.IP "-s <size index> or -s <width>x<height>"
+.IP "\-s <size index> or \-s <width>x<height>"
 This sets the screen size, either matching by size or using the index into
 the list of available sizes.
-.IP "-o \fIrotation\fP"
+.IP "\-o \fIrotation\fP"
 This specifies the orientation of the screen,
 and can be one of normal, inverted, left or right.
-.IP -x
+.IP \-x
 Reflect across the X axis.
-.IP -y
+.IP \-y
 Reflect across the Y axis.
 .SH "SEE ALSO"
 Xrandr(3)