From bebef39842c8615180e711c0ff3e8c9c40c397da Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 2 May 2016 12:59:48 +0200 Subject: drm/sun4i: add COMMON_CLK dependency The sun4i drm driver uses the clk-provider interfaces, which are not available when CONFIG_COMMON_CLK is disabled: drivers/gpu/drm/sun4i/sun4i_dotclock.c:19:16: error: field 'hw' has incomplete type struct clk_hw hw; In file included from ../include/asm-generic/bug.h:13:0, from ../arch/arm/include/asm/bug.h:59, from ../include/linux/bug.h:4, from ../include/linux/io.h:23, from ../include/linux/clk-provider.h:14, from ../drivers/gpu/drm/sun4i/sun4i_dotclock.c:13: drivers/gpu/drm/sun4i/sun4i_dotclock.c: In function 'hw_to_dclk': include/linux/kernel.h:831:48: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] ... This adds a Kconfig dependency to prevent the driver from being enabled in this case. Signed-off-by: Arnd Bergmann Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/Kconfig b/drivers/gpu/drm/sun4i/Kconfig index 99510e64e91a..a4b357db8856 100644 --- a/drivers/gpu/drm/sun4i/Kconfig +++ b/drivers/gpu/drm/sun4i/Kconfig @@ -1,6 +1,6 @@ config DRM_SUN4I tristate "DRM Support for Allwinner A10 Display Engine" - depends on DRM && ARM + depends on DRM && ARM && COMMON_CLK depends on ARCH_SUNXI || COMPILE_TEST select DRM_GEM_CMA_HELPER select DRM_KMS_HELPER -- cgit v1.2.3 From f1b78f0e759b174ec4f5e3b0dd27a079a2416b66 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 3 May 2016 17:23:28 +0200 Subject: drm: sun4i: print DMA address correctly The newly added sun4i drm driver prints a dma address using the %x format string, which cannot work when dma_addr_t is 64 bit, and gcc warns about this configuration: drm/sun4i/sun4i_backend.c: In function 'sun4i_backend_update_layer_buffer': drm/sun4i/sun4i_backend.c:193:84: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=] DRM_DEBUG_DRIVER("Using GEM @ 0x%x\n", gem->paddr); drm/sun4i/sun4i_backend.c:201:84: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=] DRM_DEBUG_DRIVER("Setting buffer address to 0x%x\n", paddr); This changes the code to use the explicit %pad format string, which always prints the right length. Signed-off-by: Arnd Bergmann Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_backend.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c index f7a15c1a93bf..3ab560450a82 100644 --- a/drivers/gpu/drm/sun4i/sun4i_backend.c +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c @@ -190,7 +190,7 @@ int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend, /* Get the physical address of the buffer in memory */ gem = drm_fb_cma_get_gem_obj(fb, 0); - DRM_DEBUG_DRIVER("Using GEM @ 0x%x\n", gem->paddr); + DRM_DEBUG_DRIVER("Using GEM @ %pad\n", &gem->paddr); /* Compute the start of the displayed memory */ bpp = drm_format_plane_cpp(fb->pixel_format, 0); @@ -198,7 +198,7 @@ int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend, paddr += (state->src_x >> 16) * bpp; paddr += (state->src_y >> 16) * fb->pitches[0]; - DRM_DEBUG_DRIVER("Setting buffer address to 0x%x\n", paddr); + DRM_DEBUG_DRIVER("Setting buffer address to %pad\n", &paddr); /* Write the 32 lower bits of the address (in bits) */ lo_paddr = paddr << 3; -- cgit v1.2.3 From 9fa2568d9fe0c6dbf3253af6840de9389f4e89cb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 5 May 2016 22:10:52 +0200 Subject: drm: sun4i: fix probe error handling gcc points out a possible uninitialized variable use in sun4i_dclk_create(): drivers/gpu/drm/sun4i/sun4i_dotclock.c: In function 'sun4i_dclk_create': drivers/gpu/drm/sun4i/sun4i_dotclock.c:139:12: error: 'clk_name' may be used uninitialized in this function [-Werror=maybe-uninitialized] init.name = clk_name; The warning only shows up when CONFIG_OF is disabled, and the property is never filled, but the same bug can show up even when CONFIG_OF is enabled but of_property_read_string_index returns another error. To fix it, this ensures that sun4i_dclk_create propagates any error from of_property_read_string_index. Signed-off-by: Arnd Bergmann Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_dotclock.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_dotclock.c b/drivers/gpu/drm/sun4i/sun4i_dotclock.c index 3ff668cb463c..6c9c090a8006 100644 --- a/drivers/gpu/drm/sun4i/sun4i_dotclock.c +++ b/drivers/gpu/drm/sun4i/sun4i_dotclock.c @@ -127,10 +127,14 @@ int sun4i_dclk_create(struct device *dev, struct sun4i_tcon *tcon) const char *clk_name, *parent_name; struct clk_init_data init; struct sun4i_dclk *dclk; + int ret; parent_name = __clk_get_name(tcon->sclk0); - of_property_read_string_index(dev->of_node, "clock-output-names", 0, - &clk_name); + ret = of_property_read_string_index(dev->of_node, + "clock-output-names", 0, + &clk_name); + if (ret) + return ret; dclk = devm_kzalloc(dev, sizeof(*dclk), GFP_KERNEL); if (!dclk) -- cgit v1.2.3 From 4731a72df273bdbd225445424057c15dbb8d3495 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 2 Apr 2016 12:30:11 +0200 Subject: drm/sun4i: request exact rates to our parents Our pixel clock currently only tries to deal with the current parent rate. While that works when the resolution is the same than the one already program, or when we can compute directly the rate from the current parent rate, it cannot work in most situation when we want to change the frequency, and we end up with an improper pixel clock rate, which obviously doesn't work as expected. Ask our parent for all the possible dividers if it can reach that frequency, and return the best parent rate to the clock framework so that we can use it. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_dotclock.c | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_dotclock.c b/drivers/gpu/drm/sun4i/sun4i_dotclock.c index 6c9c090a8006..5b3463197c48 100644 --- a/drivers/gpu/drm/sun4i/sun4i_dotclock.c +++ b/drivers/gpu/drm/sun4i/sun4i_dotclock.c @@ -72,14 +72,40 @@ static unsigned long sun4i_dclk_recalc_rate(struct clk_hw *hw, static long sun4i_dclk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate) { - return *parent_rate / DIV_ROUND_CLOSEST(*parent_rate, rate); + unsigned long best_parent = 0; + u8 best_div = 1; + int i; + + for (i = 6; i < 127; i++) { + unsigned long ideal = rate * i; + unsigned long rounded; + + rounded = clk_hw_round_rate(clk_hw_get_parent(hw), + ideal); + + if (rounded == ideal) { + best_parent = rounded; + best_div = i; + goto out; + } + + if ((rounded < ideal) && (rounded > best_parent)) { + best_parent = rounded; + best_div = i; + } + } + +out: + *parent_rate = best_parent; + + return best_parent / best_div; } static int sun4i_dclk_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct sun4i_dclk *dclk = hw_to_dclk(hw); - int div = DIV_ROUND_CLOSEST(parent_rate, rate); + u8 div = parent_rate / rate; return regmap_update_bits(dclk->regmap, SUN4I_TCON0_DCLK_REG, GENMASK(6, 0), div); @@ -144,6 +170,7 @@ int sun4i_dclk_create(struct device *dev, struct sun4i_tcon *tcon) init.ops = &sun4i_dclk_ops; init.parent_names = &parent_name; init.num_parents = 1; + init.flags = CLK_SET_RATE_PARENT; dclk->regmap = tcon->regs; dclk->hw.init = &init; -- cgit v1.2.3 From bb43d40d7c830da5f623e3938fef908b003b7523 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 21 Apr 2016 11:25:26 +0200 Subject: drm/sun4i: rgb: Validate the clock rate Our pixel clock cannot reach a high enough rate for some rather high while common resolutions (like 1080p60). Make sure we filter the resolutions we cannot reach in our mode_valid function. Fixes: 29e57fab97fc ("drm: sun4i: Add RGB output") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_rgb.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c index ab6494818050..fe7ef52a9346 100644 --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c @@ -54,8 +54,13 @@ static int sun4i_rgb_get_modes(struct drm_connector *connector) static int sun4i_rgb_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct sun4i_rgb *rgb = drm_connector_to_sun4i_rgb(connector); + struct sun4i_drv *drv = rgb->drv; + struct sun4i_tcon *tcon = drv->tcon; u32 hsync = mode->hsync_end - mode->hsync_start; u32 vsync = mode->vsync_end - mode->vsync_start; + unsigned long rate = mode->clock * 1000; + long rounded_rate; DRM_DEBUG_DRIVER("Validating modes...\n"); @@ -87,6 +92,15 @@ static int sun4i_rgb_mode_valid(struct drm_connector *connector, DRM_DEBUG_DRIVER("Vertical parameters OK\n"); + rounded_rate = clk_round_rate(tcon->dclk, rate); + if (rounded_rate < rate) + return MODE_CLOCK_LOW; + + if (rounded_rate > rate) + return MODE_CLOCK_HIGH; + + DRM_DEBUG_DRIVER("Clock rate OK\n"); + return MODE_OK; } -- cgit v1.2.3 From 0bbbb00bda57e6f091275b0103445596322b9277 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 4 May 2016 17:38:32 +0200 Subject: drm/sun4i: defer only if we didn't find our panel Our code currently defers our probe on any error, even if we were not expecting to have one at all. Make sure we return -EPROBE_DEFER only when we were supposed to have a panel, but it's not probed yet. Also fix a typo while we're at it. Fixes: 29e57fab97fc ("drm: sun4i: Add RGB output") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 9f19b0e08560..16ab426ffa34 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -425,11 +425,11 @@ static struct drm_panel *sun4i_tcon_find_panel(struct device_node *node) remote = of_graph_get_remote_port_parent(end_node); if (!remote) { - DRM_DEBUG_DRIVER("Enable to parse remote node\n"); + DRM_DEBUG_DRIVER("Unable to parse remote node\n"); return ERR_PTR(-EINVAL); } - return of_drm_find_panel(remote); + return of_drm_find_panel(remote) ?: ERR_PTR(-EPROBE_DEFER); } static int sun4i_tcon_bind(struct device *dev, struct device *master, @@ -522,12 +522,13 @@ static int sun4i_tcon_probe(struct platform_device *pdev) * Defer the probe. */ panel = sun4i_tcon_find_panel(node); - if (IS_ERR(panel)) { - /* - * If we don't have a panel endpoint, just go on - */ - if (PTR_ERR(panel) != -ENODEV) - return -EPROBE_DEFER; + + /* + * If we don't have a panel endpoint, just go on + */ + if (PTR_ERR(panel) == -EPROBE_DEFER) { + DRM_DEBUG_DRIVER("Still waiting for our panel. Deferring...\n"); + return -EPROBE_DEFER; } return component_add(&pdev->dev, &sun4i_tcon_ops); -- cgit v1.2.3 From 0de6e914a035076b1241f5738c06c9d3820abd6e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 4 May 2016 17:37:58 +0200 Subject: drm/sun4i: rgb: panel is an error pointer In case of an error, our pointer to the drm_panel structure attached to our encoder will hold an error pointer, not a NULL pointer. Make sure we check the right thing. Fixes: 29e57fab97fc ("drm: sun4i: Add RGB output") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_rgb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c index fe7ef52a9346..aaffe9e64ffb 100644 --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c @@ -217,7 +217,7 @@ int sun4i_rgb_init(struct drm_device *drm) int ret; /* If we don't have a panel, there's no point in going on */ - if (!tcon->panel) + if (IS_ERR(tcon->panel)) return -ENODEV; rgb = devm_kzalloc(drm->dev, sizeof(*rgb), GFP_KERNEL); -- cgit v1.2.3 From 3d6bd9065b7acf8499d414d70bdb4b4955856299 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 11 May 2016 16:52:50 +0200 Subject: drm/sun4i: remove simplefb at probe If simplefb was setup by our bootloader and enabled in the DT, we will have a first framebuffer loaded in our system. However, as soon as our DRM driver will load, it will reset the controller, initialise it and, if the framebuffer emulation is enabled, register a second framebuffer device. This is obviously pretty bad, since the first framebuffer will be some kind of a black hole, with memory still reserved that we can write to safely, but not displayed anywhere. Make sure we remove that framebuffer when we probe so we don't end up in that situation. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_drv.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index 76e922bb60e5..af62b24c39b1 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -125,6 +125,22 @@ static struct drm_driver sun4i_drv_driver = { .disable_vblank = sun4i_drv_disable_vblank, }; +static void sun4i_remove_framebuffers(void) +{ + struct apertures_struct *ap; + + ap = alloc_apertures(1); + if (!ap) + return; + + /* The framebuffer can be located anywhere in RAM */ + ap->ranges[0].base = 0; + ap->ranges[0].size = ~0; + + remove_conflicting_framebuffers(ap, "sun4i-drm-fb", false); + kfree(ap); +} + static int sun4i_drv_bind(struct device *dev) { struct drm_device *drm; @@ -172,6 +188,9 @@ static int sun4i_drv_bind(struct device *dev) } drm->irq_enabled = true; + /* Remove early framebuffers (ie. simplefb) */ + sun4i_remove_framebuffers(); + /* Create our framebuffer */ drv->fbdev = sun4i_framebuffer_init(drm); if (IS_ERR(drv->fbdev)) { -- cgit v1.2.3 From 7aa2e2b731b337a7bc74cd076bbcd6b8b4b95fbf Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 11 May 2016 19:04:18 +0200 Subject: drm/sun4i: Convert to connector register helpers Now that connector register helpers have been created, switch to them. Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_drv.c | 31 ++----------------------------- 1 file changed, 2 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index af62b24c39b1..257d2b4f3645 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -24,34 +24,6 @@ #include "sun4i_layer.h" #include "sun4i_tcon.h" -static int sun4i_drv_connector_plug_all(struct drm_device *drm) -{ - struct drm_connector *connector, *failed; - int ret; - - mutex_lock(&drm->mode_config.mutex); - list_for_each_entry(connector, &drm->mode_config.connector_list, head) { - ret = drm_connector_register(connector); - if (ret) { - failed = connector; - goto err; - } - } - mutex_unlock(&drm->mode_config.mutex); - return 0; - -err: - list_for_each_entry(connector, &drm->mode_config.connector_list, head) { - if (failed == connector) - break; - - drm_connector_unregister(connector); - } - mutex_unlock(&drm->mode_config.mutex); - - return ret; -} - static int sun4i_drv_enable_vblank(struct drm_device *drm, unsigned int pipe) { struct sun4i_drv *drv = drm->dev_private; @@ -206,7 +178,7 @@ static int sun4i_drv_bind(struct device *dev) if (ret) goto free_drm; - ret = sun4i_drv_connector_plug_all(drm); + ret = drm_connector_register_all(drm); if (ret) goto unregister_drm; @@ -223,6 +195,7 @@ static void sun4i_drv_unbind(struct device *dev) { struct drm_device *drm = dev_get_drvdata(dev); + drm_connector_unregister_all(drm); drm_dev_unregister(drm); drm_kms_helper_poll_fini(drm); sun4i_framebuffer_free(drm); -- cgit v1.2.3 From 13fef095bde04228316046f997eb963285d8532e Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 17 May 2016 23:56:06 +0800 Subject: drm: sun4i: do cleanup if RGB output init fails sun4i_rgb_init() can fail, which results in TCON failing to bind. In this case we need to do cleanup, specificly unregistering the dotclock, which is regmap based, and the regmap is registered as part of the sun4i_tcon_bind(). Failing to do so results in a NULL pointer reference when the CCF tries to turn off unused clocks. Fixes: 29e57fab97fc ("drm: sun4i: Add RGB output") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 16ab426ffa34..652385f09735 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -490,7 +490,11 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, return 0; } - return sun4i_rgb_init(drm); + ret = sun4i_rgb_init(drm); + if (ret < 0) + goto err_free_clocks; + + return 0; err_free_clocks: sun4i_tcon_free_clocks(tcon); -- cgit v1.2.3 From 595144c1141c951a3c6bb9004ae6a2bc29aad66f Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 17 May 2016 20:57:50 +0200 Subject: clk: rockchip: initialize flags of clk_init_data in mmc-phase clock The flags element of clk_init_data was never initialized for mmc- phase-clocks resulting in the element containing a random value and thus possibly enabling unwanted clock flags. Fixes: 89bf26cbc1a0 ("clk: rockchip: Add support for the mmc clock phases using the framework") Cc: stable@vger.kernel.org Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-mmc-phase.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-mmc-phase.c b/drivers/clk/rockchip/clk-mmc-phase.c index bc856f21f6b2..460113008bd9 100644 --- a/drivers/clk/rockchip/clk-mmc-phase.c +++ b/drivers/clk/rockchip/clk-mmc-phase.c @@ -154,6 +154,7 @@ struct clk *rockchip_clk_register_mmc(const char *name, return ERR_PTR(-ENOMEM); init.name = name; + init.flags = 0; init.num_parents = num_parents; init.parent_names = parent_names; init.ops = &rockchip_mmc_clk_ops; -- cgit v1.2.3 From 176df69cb080c8cd813e51f800069e13ee607641 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 13 May 2016 11:42:16 -0700 Subject: clk: rockchip: mark rk3399 GIC clocks as critical We never want to kill the GIC. Noticed when making other clock fixups, and seeing the newly-constructed clock tree try to disable cpll, where we had this parent structure: aclk_gic <------\ |--- aclk_gic_pre <-- cpll <-- pll_cpll aclk_gic_noc <--/ Signed-off-by: Brian Norris Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index 291543f52caa..145756c4f3c8 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -1466,6 +1466,8 @@ static struct rockchip_clk_branch rk3399_clk_pmu_branches[] __initdata = { static const char *const rk3399_cru_critical_clocks[] __initconst = { "aclk_cci_pre", + "aclk_gic", + "aclk_gic_noc", "pclk_perilp0", "pclk_perilp0", "hclk_perilp0", -- cgit v1.2.3 From 3bd14ae9da9194d369334556a70a7ff73ef94491 Mon Sep 17 00:00:00 2001 From: Xing Zheng Date: Fri, 13 May 2016 11:42:17 -0700 Subject: clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src There was a typo, swapping 'c' <--> 'g'. Signed-off-by: Xing Zheng Signed-off-by: Brian Norris Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index 145756c4f3c8..9f86bfef70f7 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -832,9 +832,9 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = { RK3399_CLKGATE_CON(13), 1, GFLAGS), /* perihp */ - GATE(0, "cpll_aclk_perihp_src", "gpll", CLK_IGNORE_UNUSED, + GATE(0, "cpll_aclk_perihp_src", "cpll", CLK_IGNORE_UNUSED, RK3399_CLKGATE_CON(5), 0, GFLAGS), - GATE(0, "gpll_aclk_perihp_src", "cpll", CLK_IGNORE_UNUSED, + GATE(0, "gpll_aclk_perihp_src", "gpll", CLK_IGNORE_UNUSED, RK3399_CLKGATE_CON(5), 1, GFLAGS), COMPOSITE(ACLK_PERIHP, "aclk_perihp", mux_aclk_perihp_p, CLK_IGNORE_UNUSED, RK3399_CLKSEL_CON(14), 7, 1, MFLAGS, 0, 5, DFLAGS, -- cgit v1.2.3 From 4715f81afc342996f680b08c944a712d9cbef11b Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Thu, 12 May 2016 11:03:16 -0700 Subject: clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization" This reverts commit 7a03fe6f48f3 ("clk: rockchip: reset init state before mmc card initialization"). Though not totally obvious from the commit message nor from the source code, that commit appears to be trying to reset the "_drv" MMC clocks to 90 degrees (note that the "_sample" MMC clocks have a shift of 0 so are not touched). The major problem here is that it doesn't properly reset things. The phase is a two bit field and the commit only touches one of the two bits. Thus the commit had the following affect: - phase 0 => phase 90 - phase 90 => phase 90 - phase 180 => phase 270 - phase 270 => phase 270 Things get even weirder if you happen to have a bootloader that was actually using delay elements (should be no reason to, but you never know), since those are additional bits that weren't touched by the original patch. This is unlikely to be what we actually want. Checking on rk3288-veyron devices, I can see that the bootloader leaves these clocks as: - emmc: phase 180 - sdmmc: phase 90 - sdio0: phase 90 Thus on rk3288-veyron devices the commit we're reverting had the effect of changing the eMMC clock to phase 270. This probably explains the scattered reports I've heard of eMMC devices not working on some veyron devices when using the upstream kernel. The original commit was presumably made because previously the kernel didn't touch the "_drv" phase at all and relied on whatever value was there when the kernel started. If someone was using a bootloader that touched the "_drv" phase then, indeed, we should have code in the kernel to fix that. ...and also, to get ideal timings, we should also have the kernel change the phase depending on the speed mode. In fact, that's the subject of a recent patch I posted at . Ideally, we should take both the patch posted to dw_mmc and this revert. Since those will likely go through different trees, here I describe behavior with the combos: 1. Just this revert: likely will fix rk3288-veyron eMMC on some devices + other cases; might break someone with a strange bootloader that sets the phase to 0 or one that uses delay elements (pretty unpredicable what would happen in that case). 2. Just dw_mmc patch: fixes everyone. Effectly the dw_mmc patch will totally override the broken patch and fix everything. 3. Both patches: fixes everyone. Once dw_mmc is initting properly then any defaults from the clock code doesn't mattery. Fixes: 7a03fe6f48f3 ("clk: rockchip: reset init state before mmc card initialization") Signed-off-by: Douglas Anderson Reviewed-by: Shawn Lin [emmc and sdmmc still work on all current boards in mainline after this revert, so they should take precedence over any out-of-tree board that will hopefully again get fixed with the better upcoming dw_mmc change.] Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-mmc-phase.c | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-mmc-phase.c b/drivers/clk/rockchip/clk-mmc-phase.c index 460113008bd9..077fcdc7908b 100644 --- a/drivers/clk/rockchip/clk-mmc-phase.c +++ b/drivers/clk/rockchip/clk-mmc-phase.c @@ -41,8 +41,6 @@ static unsigned long rockchip_mmc_recalc(struct clk_hw *hw, #define ROCKCHIP_MMC_DEGREE_MASK 0x3 #define ROCKCHIP_MMC_DELAYNUM_OFFSET 2 #define ROCKCHIP_MMC_DELAYNUM_MASK (0xff << ROCKCHIP_MMC_DELAYNUM_OFFSET) -#define ROCKCHIP_MMC_INIT_STATE_RESET 0x1 -#define ROCKCHIP_MMC_INIT_STATE_SHIFT 1 #define PSECS_PER_SEC 1000000000000LL @@ -163,15 +161,6 @@ struct clk *rockchip_clk_register_mmc(const char *name, mmc_clock->reg = reg; mmc_clock->shift = shift; - /* - * Assert init_state to soft reset the CLKGEN - * for mmc tuning phase and degree - */ - if (mmc_clock->shift == ROCKCHIP_MMC_INIT_STATE_SHIFT) - writel(HIWORD_UPDATE(ROCKCHIP_MMC_INIT_STATE_RESET, - ROCKCHIP_MMC_INIT_STATE_RESET, - mmc_clock->shift), mmc_clock->reg); - clk = clk_register(NULL, &mmc_clock->hw); if (IS_ERR(clk)) kfree(mmc_clock); -- cgit v1.2.3 From 3183c0d519ff83af2926382c11716496f01d34bf Mon Sep 17 00:00:00 2001 From: Xing Zheng Date: Thu, 26 May 2016 21:49:08 +0800 Subject: clk: rockchip: fix cpuclk registration error handling It maybe due to a copy-paste error the error handing should be cclk not clk when checking if the cpuclk registration succeeded. Reported-by: Lin Huang Signed-off-by: Xing Zheng Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-cpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-cpu.c b/drivers/clk/rockchip/clk-cpu.c index 4bb130cd0062..05b3d73bfefa 100644 --- a/drivers/clk/rockchip/clk-cpu.c +++ b/drivers/clk/rockchip/clk-cpu.c @@ -321,9 +321,9 @@ struct clk *rockchip_clk_register_cpuclk(const char *name, } cclk = clk_register(NULL, &cpuclk->hw); - if (IS_ERR(clk)) { + if (IS_ERR(cclk)) { pr_err("%s: could not register cpuclk %s\n", __func__, name); - ret = PTR_ERR(clk); + ret = PTR_ERR(cclk); goto free_rate_table; } -- cgit v1.2.3 From 3ac066e2227cb272c097f34475247fa0a6cdd2ff Mon Sep 17 00:00:00 2001 From: Jean-Jacques Hiblot Date: Tue, 31 May 2016 17:56:23 +0200 Subject: spi: spi-ti-qspi: Suspend the queue before removing the device Before disabling the pm_runtime, we must ensure that there is no transfer in progress nor will a new one be started. Otherwise the message pump will fail and in the end, the process requesting the transfer will be stuck. This behavior has been observed when transferring data from a SPI flash with dd while removing the module on a DRA7x-evm. Signed-off-by: Jean-Jacques Hiblot Signed-off-by: Mark Brown --- drivers/spi/spi-ti-qspi.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index 443f664534e1..29ea8d2f9824 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -646,6 +646,13 @@ free_master: static int ti_qspi_remove(struct platform_device *pdev) { + struct ti_qspi *qspi = platform_get_drvdata(pdev); + int rc; + + rc = spi_master_suspend(qspi->master); + if (rc) + return rc; + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); -- cgit v1.2.3 From 540c26087bfbad6ea72758b76b16ae6282a73fea Mon Sep 17 00:00:00 2001 From: Cameron Gutman Date: Wed, 1 Jun 2016 11:32:51 -0700 Subject: Input: xpad - fix rumble on Xbox One controllers with 2015 firmware Xbox One controllers that shipped with or were upgraded to the 2015 firmware discard the current rumble packets we send. This patch changes the Xbox One rumble packet to a form that both the newer and older firmware will accept. It is based on changes made to support newer Xbox One controllers in the SteamOS brewmaster-4.1 kernel branch. Signed-off-by: Cameron Gutman Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 804dbcc37d3f..923c57236c51 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -1031,17 +1031,17 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect case XTYPE_XBOXONE: packet->data[0] = 0x09; /* activate rumble */ - packet->data[1] = 0x08; + packet->data[1] = 0x00; packet->data[2] = xpad->odata_serial++; - packet->data[3] = 0x08; /* continuous effect */ - packet->data[4] = 0x00; /* simple rumble mode */ - packet->data[5] = 0x03; /* L and R actuator only */ - packet->data[6] = 0x00; /* TODO: LT actuator */ - packet->data[7] = 0x00; /* TODO: RT actuator */ + packet->data[3] = 0x09; + packet->data[4] = 0x00; + packet->data[5] = 0x0F; + packet->data[6] = 0x00; + packet->data[7] = 0x00; packet->data[8] = strong / 512; /* left actuator */ packet->data[9] = weak / 512; /* right actuator */ - packet->data[10] = 0x80; /* length of pulse */ - packet->data[11] = 0x00; /* stop period of pulse */ + packet->data[10] = 0xFF; + packet->data[11] = 0x00; packet->data[12] = 0x00; packet->len = 13; packet->pending = true; -- cgit v1.2.3 From 62d0e71df063101e4551327bd9fa9aaa3535c86b Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Fri, 3 Jun 2016 08:54:18 +0800 Subject: clk: rockchip: release io resource when failing to init clk on rk3399 We should call iounmap to relase reg_base since it's not going to be used any more if failing to init clk. This was missing on the newly added rk3399 clock tree. Signed-off-by: Shawn Lin Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index 9f86bfef70f7..8059a8d3ea36 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -1510,6 +1510,7 @@ static void __init rk3399_clk_init(struct device_node *np) ctx = rockchip_clk_init(np, reg_base, CLK_NR_CLKS); if (IS_ERR(ctx)) { pr_err("%s: rockchip clk init failed\n", __func__); + iounmap(reg_base); return; } @@ -1555,6 +1556,7 @@ static void __init rk3399_pmu_clk_init(struct device_node *np) ctx = rockchip_clk_init(np, reg_base, CLKPMU_NR_CLKS); if (IS_ERR(ctx)) { pr_err("%s: rockchip pmu clk init failed\n", __func__); + iounmap(reg_base); return; } -- cgit v1.2.3 From fee48cf8374569a3888fd8c8536283e6067f0cfb Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Fri, 1 Apr 2016 14:12:12 -0700 Subject: ath10k: fix deadlock when peer cannot be created We must not attempt to send WMI packets while holding the data-lock, as it may deadlock: BUG: sleeping function called from invalid context at drivers/net/wireless/ath/ath10k/wmi.c:1824 in_atomic(): 1, irqs_disabled(): 0, pid: 2878, name: wpa_supplicant ============================================= [ INFO: possible recursive locking detected ] 4.4.6+ #21 Tainted: G W O --------------------------------------------- wpa_supplicant/2878 is trying to acquire lock: (&(&ar->data_lock)->rlock){+.-...}, at: [] ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] but task is already holding lock: (&(&ar->data_lock)->rlock){+.-...}, at: [] ath10k_peer_create+0x122/0x1ae [ath10k_core] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&ar->data_lock)->rlock); lock(&(&ar->data_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by wpa_supplicant/2878: #0: (rtnl_mutex){+.+.+.}, at: [] rtnl_lock+0x12/0x14 #1: (&ar->conf_mutex){+.+.+.}, at: [] ath10k_add_interface+0x3b/0xbda [ath10k_core] #2: (&(&ar->data_lock)->rlock){+.-...}, at: [] ath10k_peer_create+0x122/0x1ae [ath10k_core] #3: (rcu_read_lock){......}, at: [] rcu_read_lock+0x0/0x66 [mac80211] stack backtrace: CPU: 3 PID: 2878 Comm: wpa_supplicant Tainted: G W O 4.4.6+ #21 Hardware name: To be filled by O.E.M. To be filled by O.E.M./ChiefRiver, BIOS 4.6.5 06/07/2013 0000000000000000 ffff8801fcadf8f0 ffffffff8137086d ffffffff82681720 ffffffff82681720 ffff8801fcadf9b0 ffffffff8112e3be ffff8801fcadf920 0000000100000000 ffffffff82681720 ffffffffa0721500 ffff8801fcb8d348 Call Trace: [] dump_stack+0x81/0xb6 [] __lock_acquire+0xc5b/0xde7 [] ? ath10k_wmi_tx_beacons_iter+0x15/0x11a [ath10k_core] [] ? mark_lock+0x24/0x201 [] lock_acquire+0x132/0x1cb [] ? lock_acquire+0x132/0x1cb [] ? ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] [] ? ath10k_wmi_cmd_send_nowait+0x1ce/0x1ce [ath10k_core] [] _raw_spin_lock_bh+0x31/0x40 [] ? ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] [] ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] [] ? ath10k_wmi_cmd_send_nowait+0x1ce/0x1ce [ath10k_core] [] __iterate_interfaces+0x9d/0x13d [mac80211] [] ieee80211_iterate_active_interfaces_atomic+0x32/0x3e [mac80211] [] ? ath10k_wmi_cmd_send_nowait+0x1ce/0x1ce [ath10k_core] [] ath10k_wmi_tx_beacons_nowait.isra.13+0x14/0x16 [ath10k_core] [] ath10k_wmi_cmd_send+0x71/0x242 [ath10k_core] [] ath10k_wmi_peer_delete+0x3f/0x42 [ath10k_core] [] ath10k_peer_create+0x15e/0x1ae [ath10k_core] [] ath10k_add_interface+0x70d/0xbda [ath10k_core] [] drv_add_interface+0x123/0x1a5 [mac80211] [] ieee80211_do_open+0x351/0x667 [mac80211] [] ieee80211_open+0x49/0x4c [mac80211] [] __dev_open+0x88/0xde [] __dev_change_flags+0xa4/0x13a [] dev_change_flags+0x1f/0x54 [] devinet_ioctl+0x2b9/0x5c9 [] ? copy_to_user+0x32/0x38 [] inet_ioctl+0x81/0x9d [] ? inet_ioctl+0x81/0x9d [] sock_do_ioctl+0x20/0x3d [] sock_ioctl+0x222/0x22e [] do_vfs_ioctl+0x453/0x4d7 [] ? __sys_recvmsg+0x4c/0x5b [] ? __fget_light+0x48/0x6c [] SyS_ioctl+0x52/0x74 [] entry_SYSCALL_64_fastpath+0x16/0x7a Signed-off-by: Ben Greear Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 6dd1d26b357f..4040f9413e86 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -679,10 +679,10 @@ static int ath10k_peer_create(struct ath10k *ar, peer = ath10k_peer_find(ar, vdev_id, addr); if (!peer) { + spin_unlock_bh(&ar->data_lock); ath10k_warn(ar, "failed to find peer %pM on vdev %i after creation\n", addr, vdev_id); ath10k_wmi_peer_delete(ar, vdev_id, addr); - spin_unlock_bh(&ar->data_lock); return -ENOENT; } -- cgit v1.2.3 From 8d0a0710ea0d22881fdb40eb79d346a98cc64ae6 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Thu, 2 Jun 2016 17:59:54 +0300 Subject: ath10k: fix crash related to printing features This looks like a regression from commit c4cdf753ed42 ("ath10k: move fw_features to struct ath10k_fw_file"), we were printing the features from a wrong struct. Fixes: c4cdf753ed42 ("ath10k: move fw_features to struct ath10k_fw_file") Signed-off-by: Ben Greear [kvalo@qca.qualcomm.com: improve commit log] Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 49af62428c88..a92a0ba829f5 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -1083,7 +1083,7 @@ int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name, } ath10k_dbg_dump(ar, ATH10K_DBG_BOOT, "features", "", - ar->running_fw->fw_file.fw_features, + fw_file->fw_features, sizeof(fw_file->fw_features)); break; case ATH10K_FW_IE_FW_IMAGE: -- cgit v1.2.3 From 4dc0dd83603f05dc3ae152af33ecb15104c313f3 Mon Sep 17 00:00:00 2001 From: Tomeu Vizoso Date: Wed, 8 Jun 2016 09:32:51 +0200 Subject: spi: rockchip: Signal unfinished DMA transfers When using DMA, the transfer_one callback should return 1 because the transfer hasn't finished yet. A previous commit changed the function to return 0 when the DMA channels were correctly prepared. This manifested in Veyron boards with this message: [ 1.983605] cros-ec-spi spi0.0: EC failed to respond in time Fixes: ea9849113343 ("spi: rockchip: check return value of dmaengine_prep_slave_sg") Signed-off-by: Tomeu Vizoso Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-rockchip.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index cd89682065b9..1026e180eed7 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -578,7 +578,7 @@ static int rockchip_spi_transfer_one( struct spi_device *spi, struct spi_transfer *xfer) { - int ret = 1; + int ret = 0; struct rockchip_spi *rs = spi_master_get_devdata(master); WARN_ON(readl_relaxed(rs->regs + ROCKCHIP_SPI_SSIENR) && @@ -627,6 +627,8 @@ static int rockchip_spi_transfer_one( spi_enable_chip(rs, 1); ret = rockchip_spi_prepare_dma(rs); } + /* successful DMA prepare means the transfer is in progress */ + ret = ret ? ret : 1; } else { spi_enable_chip(rs, 1); ret = rockchip_spi_pio_transfer(rs); -- cgit v1.2.3 From 72d8c36ec364c82bf1bf0c64dfa1041cfaf139f7 Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Tue, 7 Jun 2016 14:53:56 +0800 Subject: scsi: fix race between simultaneous decrements of ->host_failed sas_ata_strategy_handler() adds the works of the ata error handler to system_unbound_wq. This workqueue asynchronously runs work items, so the ata error handler will be performed concurrently on different CPUs. In this case, ->host_failed will be decreased simultaneously in scsi_eh_finish_cmd() on different CPUs, and become abnormal. It will lead to permanently inequality between ->host_failed and ->host_busy, and scsi error handler thread won't start running. IO errors after that won't be handled. Since all scmds must have been handled in the strategy handler, just remove the decrement in scsi_eh_finish_cmd() and zero ->host_busy after the strategy handler to fix this race. Fixes: 50824d6c5657 ("[SCSI] libsas: async ata-eh") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang Reviewed-by: James Bottomley Signed-off-by: Martin K. Petersen --- Documentation/scsi/scsi_eh.txt | 8 ++++++-- drivers/ata/libata-eh.c | 2 +- drivers/scsi/scsi_error.c | 4 +++- 3 files changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt index 8638f61c8c9d..37eca00796ee 100644 --- a/Documentation/scsi/scsi_eh.txt +++ b/Documentation/scsi/scsi_eh.txt @@ -263,19 +263,23 @@ scmd->allowed. 3. scmd recovered ACTION: scsi_eh_finish_cmd() is invoked to EH-finish scmd - - shost->host_failed-- - clear scmd->eh_eflags - scsi_setup_cmd_retry() - move from local eh_work_q to local eh_done_q LOCKING: none + CONCURRENCY: at most one thread per separate eh_work_q to + keep queue manipulation lockless 4. EH completes ACTION: scsi_eh_flush_done_q() retries scmds or notifies upper - layer of failure. + layer of failure. May be called concurrently but must have + a no more than one thread per separate eh_work_q to + manipulate the queue locklessly - scmd is removed from eh_done_q and scmd->eh_entry is cleared - if retry is necessary, scmd is requeued using scsi_queue_insert() - otherwise, scsi_finish_command() is invoked for scmd + - zero shost->host_failed LOCKING: queue or finish function performs appropriate locking diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 961acc788f44..91a9e6af2ec4 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -606,7 +606,7 @@ void ata_scsi_error(struct Scsi_Host *host) ata_scsi_port_error_handler(host, ap); /* finish or retry handled scmd's and clean up */ - WARN_ON(host->host_failed || !list_empty(&eh_work_q)); + WARN_ON(!list_empty(&eh_work_q)); DPRINTK("EXIT\n"); } diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 984ddcb4786d..1b9c049bd5c5 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1127,7 +1127,6 @@ static int scsi_eh_action(struct scsi_cmnd *scmd, int rtn) */ void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q) { - scmd->device->host->host_failed--; scmd->eh_eflags = 0; list_move_tail(&scmd->eh_entry, done_q); } @@ -2226,6 +2225,9 @@ int scsi_error_handler(void *data) else scsi_unjam_host(shost); + /* All scmds have been handled */ + shost->host_failed = 0; + /* * Note - if the above fails completely, the action is to take * individual devices offline and flush the queue of any -- cgit v1.2.3 From 06a84db74c3572cde79eb1b04f301399eafb8226 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Mon, 2 May 2016 15:27:34 +0300 Subject: iwlwifi: mvm: increase scan timeout to 20 seconds The 16 seconds timeout we were using turned out to be too short. Recalculations by system show that the total time in both bands should be < 18.5 seconds, even in the slowest cases (e.g. DCM P2P with DTIM=2). Rounding it up to 20 seconds for a bit more safety. Fixes: 728e825f81b1 ("iwlwifi: mvm: add a scan timeout for regular scans") Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c index 6f609dd5c222..e78fc567ff7d 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c @@ -1222,7 +1222,7 @@ static int iwl_mvm_check_running_scans(struct iwl_mvm *mvm, int type) return -EIO; } -#define SCAN_TIMEOUT (16 * HZ) +#define SCAN_TIMEOUT (20 * HZ) void iwl_mvm_scan_timeout(unsigned long data) { -- cgit v1.2.3 From 7d6a1ab6a2db180122dee8db6c201f2dcf677813 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 15 May 2016 10:20:29 +0300 Subject: iwlwifi: mvm: fix RCU splat in TKIP's update_key The commit below mistakenly changed an rcu_dereference_check to a rcu_dereference_protected which introduced the following RCU warning: [ INFO: suspicious RCU usage. ] 4.6.0-rc7-next-20160513-dbg-00004-g8de8b92-dirty #655 Not tainted ------------------------------- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:1069 suspicious rcu_dereference_protected() usage! Call Trace: [] lockdep_rcu_suspicious+0xf7/0x100 [] iwl_mvm_get_key_sta.part.0+0x5d/0x80 [iwlmvm] [] iwl_mvm_update_tkip_key+0xd3/0x162 [iwlmvm] [] iwl_mvm_mac_update_tkip_key+0x17/0x19 [iwlmvm] [] ieee80211_tkip_decrypt_data+0x22c/0x24b [mac80211] [] ieee80211_crypto_tkip_decrypt+0xc5/0x110 [mac80211] [] ieee80211_rx_handlers+0x9bb/0x1fe1 [mac80211] Fixes: 13303c0fb148 ("iwlwifi: mvm: use helpers to get iwl_mvm_sta") Reported-by: Sergey Senozhatsky Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index fea4d3437e2f..0454bfe0ef6c 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1852,12 +1852,18 @@ static struct iwl_mvm_sta *iwl_mvm_get_key_sta(struct iwl_mvm *mvm, mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) { u8 sta_id = mvmvif->ap_sta_id; + sta = rcu_dereference_check(mvm->fw_id_to_mac_id[sta_id], + lockdep_is_held(&mvm->mutex)); + /* * It is possible that the 'sta' parameter is NULL, * for example when a GTK is removed - the sta_id will then * be the AP ID, and no station was passed by mac80211. */ - return iwl_mvm_sta_from_staid_protected(mvm, sta_id); + if (IS_ERR_OR_NULL(sta)) + return NULL; + + return iwl_mvm_sta_from_mac80211(sta); } return NULL; -- cgit v1.2.3 From 1f9788f335d7c3145bcb59bd570c5b9ef7203ef4 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Mon, 16 May 2016 14:34:20 +0300 Subject: iwlwifi: mvm: fix potential NULL-dereference in iwl_mvm_reorder() We try to access sta before we check for IS_ERR_OR_NULL(), so we may end up accessing a NULL pointer. To prevent that, move the conversion from sta to mvm_sta below the check. Fixes: b915c10174fb ("iwlwifi: mvm: add reorder buffer per queue") Reported-by: Dan Carpenter Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index ac2c5718e454..2c61516d06ff 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -581,7 +581,7 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, struct iwl_rx_mpdu_desc *desc) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct iwl_mvm_sta *mvm_sta = iwl_mvm_sta_from_mac80211(sta); + struct iwl_mvm_sta *mvm_sta; struct iwl_mvm_baid_data *baid_data; struct iwl_mvm_reorder_buffer *buffer; struct sk_buff *tail; @@ -604,6 +604,8 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, if (WARN_ON(IS_ERR_OR_NULL(sta))) return false; + mvm_sta = iwl_mvm_sta_from_mac80211(sta); + /* not a data packet */ if (!ieee80211_is_data_qos(hdr->frame_control) || is_multicast_ether_addr(hdr->addr1)) -- cgit v1.2.3 From aa950524d501afa28869b7f56e539fd9e744dd9f Mon Sep 17 00:00:00 2001 From: Ayala Beker Date: Wed, 1 Jun 2016 00:28:09 +0300 Subject: iwlwifi: mvm: set the encryption type of an IGTK key The FW expect the driver to set the encryption algorithm type when installing the IGTK key in the HW. Currently when installing CMAC IGTK key we don't set the algorithm type and as a result the FW fails to calculate the MIC of multicast management frames. Fix it. Signed-off-by: Ayala Beker Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 0454bfe0ef6c..b23ab4a4504f 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1961,6 +1961,14 @@ static int iwl_mvm_send_sta_igtk(struct iwl_mvm *mvm, struct ieee80211_key_seq seq; const u8 *pn; + switch (keyconf->cipher) { + case WLAN_CIPHER_SUITE_AES_CMAC: + igtk_cmd.ctrl_flags |= cpu_to_le32(STA_KEY_FLG_CCM); + break; + default: + return -EINVAL; + } + memcpy(igtk_cmd.IGTK, keyconf->key, keyconf->keylen); ieee80211_get_key_rx_seq(keyconf, 0, &seq); pn = seq.aes_cmac.pn; -- cgit v1.2.3 From 280a3efa82fccc9532c968a77e5162cb9f0af497 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 7 Jun 2016 14:46:37 +0200 Subject: iwlwifi: mvm: fix a few firmware capability checks My cleanup in "iwlwifi: prepare for higher API/CAPA bits" accidentally inverted a few tests - fix them. Fixes: 859d914c8f5c ("iwlwifi: prepare for higher API/CAPA bits") Reported-by: Sara Sharon Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index e5f267b21316..18a8474b5760 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -3851,8 +3851,8 @@ static int iwl_mvm_mac_get_survey(struct ieee80211_hw *hw, int idx, if (idx != 0) return -ENOENT; - if (fw_has_capa(&mvm->fw->ucode_capa, - IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS)) + if (!fw_has_capa(&mvm->fw->ucode_capa, + IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS)) return -ENOENT; mutex_lock(&mvm->mutex); @@ -3898,8 +3898,8 @@ static void iwl_mvm_mac_sta_statistics(struct ieee80211_hw *hw, struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); - if (fw_has_capa(&mvm->fw->ucode_capa, - IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS)) + if (!fw_has_capa(&mvm->fw->ucode_capa, + IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS)) return; /* if beacon filtering isn't on mac80211 does it anyway */ -- cgit v1.2.3 From fc0f7e3317c5f406e6d5520209b4689a4ffecfdf Mon Sep 17 00:00:00 2001 From: Manfred Schlaegl Date: Mon, 6 Jun 2016 10:47:47 +0200 Subject: net: phy: smsc: reintroduced unconditional soft reset We detected some problems using the smsc lan8720a in combination with i.MX28 and tracked this down to commit 21009686662f ("net: phy: smsc: move smsc_phy_config_init reset part in a soft_reset function") With 2100968666 the generic soft reset is replaced by a specific function which handles power down state correctly. But additionally the soft reset itself got conditional and is therefore also only performed if the phy is in power down state. This patch keeps the conditional wake up from power down, but re-introduces the unconditional soft reset using the generic soft reset function. It was tested on linux-4.1.25 and linux-4.7.0-rc2. Signed-off-by: Manfred Schlaegl Signed-off-by: David S. Miller --- drivers/net/phy/smsc.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 2e21e9366f76..b62c4aaee40b 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -75,22 +75,13 @@ static int smsc_phy_reset(struct phy_device *phydev) * in all capable mode before using it. */ if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) { - int timeout = 50000; - - /* set "all capable" mode and reset the phy */ + /* set "all capable" mode */ rc |= MII_LAN83C185_MODE_ALL; phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc); - phy_write(phydev, MII_BMCR, BMCR_RESET); - - /* wait end of reset (max 500 ms) */ - do { - udelay(10); - if (timeout-- == 0) - return -1; - rc = phy_read(phydev, MII_BMCR); - } while (rc & BMCR_RESET); } - return 0; + + /* reset the phy */ + return genphy_soft_reset(phydev); } static int lan911x_config_init(struct phy_device *phydev) -- cgit v1.2.3 From 562c5a70400c75f50d99de631666ac7cc2f03958 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:27:58 +0200 Subject: net: mediatek: add missing return code check The code fails to check if the scratch memory was properly allocated. Add this check and return with an error if the allocation failed. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 4763252bbf85..11cd7304e497 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -495,6 +495,9 @@ static int mtk_init_fq_dma(struct mtk_eth *eth) eth->scratch_head = kcalloc(cnt, MTK_QDMA_PAGE_SIZE, GFP_KERNEL); + if (unlikely(!eth->scratch_head)) + return -ENOMEM; + dma_addr = dma_map_single(eth->dev, eth->scratch_head, cnt * MTK_QDMA_PAGE_SIZE, DMA_FROM_DEVICE); -- cgit v1.2.3 From 605e4fe476956c67ced8518247e6c9601a31b868 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:27:59 +0200 Subject: net: mediatek: fix missing free of scratch memory Scratch memory gets allocated in mtk_init_fq_dma() but the corresponding code to free it is missing inside mtk_dma_free() causing a memory leak. With this patch applied, we can run ifconfig up/down several thousand times without any problems. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 18 +++++++++++++----- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 ++ 2 files changed, 15 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 11cd7304e497..fb8b17db7fa2 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -481,14 +481,14 @@ static inline void mtk_rx_get_desc(struct mtk_rx_dma *rxd, /* the qdma core needs scratch memory to be setup */ static int mtk_init_fq_dma(struct mtk_eth *eth) { - dma_addr_t phy_ring_head, phy_ring_tail; + dma_addr_t phy_ring_tail; int cnt = MTK_DMA_SIZE; dma_addr_t dma_addr; int i; eth->scratch_ring = dma_alloc_coherent(eth->dev, cnt * sizeof(struct mtk_tx_dma), - &phy_ring_head, + ð->phy_scratch_ring, GFP_ATOMIC | __GFP_ZERO); if (unlikely(!eth->scratch_ring)) return -ENOMEM; @@ -505,19 +505,19 @@ static int mtk_init_fq_dma(struct mtk_eth *eth) return -ENOMEM; memset(eth->scratch_ring, 0x0, sizeof(struct mtk_tx_dma) * cnt); - phy_ring_tail = phy_ring_head + + phy_ring_tail = eth->phy_scratch_ring + (sizeof(struct mtk_tx_dma) * (cnt - 1)); for (i = 0; i < cnt; i++) { eth->scratch_ring[i].txd1 = (dma_addr + (i * MTK_QDMA_PAGE_SIZE)); if (i < cnt - 1) - eth->scratch_ring[i].txd2 = (phy_ring_head + + eth->scratch_ring[i].txd2 = (eth->phy_scratch_ring + ((i + 1) * sizeof(struct mtk_tx_dma))); eth->scratch_ring[i].txd3 = TX_DMA_SDL(MTK_QDMA_PAGE_SIZE); } - mtk_w32(eth, phy_ring_head, MTK_QDMA_FQ_HEAD); + mtk_w32(eth, eth->phy_scratch_ring, MTK_QDMA_FQ_HEAD); mtk_w32(eth, phy_ring_tail, MTK_QDMA_FQ_TAIL); mtk_w32(eth, (cnt << 16) | cnt, MTK_QDMA_FQ_CNT); mtk_w32(eth, MTK_QDMA_PAGE_SIZE << 16, MTK_QDMA_FQ_BLEN); @@ -1210,6 +1210,14 @@ static void mtk_dma_free(struct mtk_eth *eth) for (i = 0; i < MTK_MAC_COUNT; i++) if (eth->netdev[i]) netdev_reset_queue(eth->netdev[i]); + if (eth->scratch_ring) { + dma_free_coherent(eth->dev, + MTK_DMA_SIZE * sizeof(struct mtk_tx_dma), + eth->scratch_ring, + eth->phy_scratch_ring); + eth->scratch_ring = NULL; + eth->phy_scratch_ring = 0; + } mtk_tx_clean(eth); mtk_rx_clean(eth); kfree(eth->scratch_head); diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h index eed626d56ea4..57f7e8a3dbe2 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -357,6 +357,7 @@ struct mtk_rx_ring { * @rx_ring: Pointer to the memore holding info about the RX ring * @rx_napi: The NAPI struct * @scratch_ring: Newer SoCs need memory for a second HW managed TX ring + * @phy_scratch_ring: physical address of scratch_ring * @scratch_head: The scratch memory that scratch_ring points to. * @clk_ethif: The ethif clock * @clk_esw: The switch clock @@ -384,6 +385,7 @@ struct mtk_eth { struct mtk_rx_ring rx_ring; struct napi_struct rx_napi; struct mtk_tx_dma *scratch_ring; + dma_addr_t phy_scratch_ring; void *scratch_head; struct clk *clk_ethif; struct clk *clk_esw; -- cgit v1.2.3 From 2fae723cefb8bfe712371978288aa0a70b54802e Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:00 +0200 Subject: net: mediatek: invalid buffer lookup in mtk_tx_map() The lookup of the tx_buffer in the error path inside mtk_tx_map() uses the wrong descriptor pointer. This looks like a copy & paste error. Change the code to use the correct pointer. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index fb8b17db7fa2..8c3e54387948 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -674,7 +674,7 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev, err_dma: do { - tx_buf = mtk_desc_to_tx_buf(ring, txd); + tx_buf = mtk_desc_to_tx_buf(ring, itxd); /* unmap dma */ mtk_tx_unmap(&dev->dev, tx_buf); -- cgit v1.2.3 From 94321a9fc9f5b6c6e949cc7c69741538f556ab74 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:01 +0200 Subject: net: mediatek: dropped rx packets are not being counted properly There are two places inside mtk_poll_rx where rx_dropped is not being incremented properly. Fix this by adding the missing code to increment the counter. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 8c3e54387948..b6d3c217722d 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -829,6 +829,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget, DMA_FROM_DEVICE); if (unlikely(dma_mapping_error(&netdev->dev, dma_addr))) { skb_free_frag(new_data); + netdev->stats.rx_dropped++; goto release_desc; } @@ -836,6 +837,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget, skb = build_skb(data, ring->frag_size); if (unlikely(!skb)) { put_page(virt_to_head_page(new_data)); + netdev->stats.rx_dropped++; goto release_desc; } skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN); -- cgit v1.2.3 From 6675086d04e7c0748cd5884f7c8611b5f0836250 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:02 +0200 Subject: net: mediatek: add next data pointer coherency protection The QDMA engine can fail to update the register pointing to the next TX descriptor if this bit does not get set in the QDMA configuration register. Not setting this bit can result in invalid values inside the TX rings registers which will causes TX stalls. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index b6d3c217722d..f30c2e474b87 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1282,7 +1282,7 @@ static int mtk_start_dma(struct mtk_eth *eth) mtk_w32(eth, MTK_TX_WB_DDONE | MTK_RX_DMA_EN | MTK_TX_DMA_EN | MTK_RX_2B_OFFSET | MTK_DMA_SIZE_16DWORDS | - MTK_RX_BT_32DWORDS, + MTK_RX_BT_32DWORDS | MTK_NDP_CO_PRO, MTK_QDMA_GLO_CFG); return 0; diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h index 57f7e8a3dbe2..a5eb7c62306b 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -91,6 +91,7 @@ #define MTK_QDMA_GLO_CFG 0x1A04 #define MTK_RX_2B_OFFSET BIT(31) #define MTK_RX_BT_32DWORDS (3 << 11) +#define MTK_NDP_CO_PRO BIT(10) #define MTK_TX_WB_DDONE BIT(6) #define MTK_DMA_SIZE_16DWORDS (2 << 4) #define MTK_RX_DMA_BUSY BIT(3) -- cgit v1.2.3 From 2ff0bb61646f286fa97db2904491974302a14f1f Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:03 +0200 Subject: net: mediatek: disable all interrupts during probe The current code only disables those IRQs that we will later use. To ensure that we have a predefined state, we really want to disable all IRQs. Change the code to disable all IRQs to achieve this. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index f30c2e474b87..e3dadae9f6dd 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1396,7 +1396,7 @@ static int __init mtk_hw_init(struct mtk_eth *eth) /* disable delay and normal interrupt */ mtk_w32(eth, 0, MTK_QDMA_DELAY_INT); - mtk_irq_disable(eth, MTK_TX_DONE_INT | MTK_RX_DONE_INT); + mtk_irq_disable(eth, ~0); mtk_w32(eth, RST_GL_PSE, MTK_RST_GL); mtk_w32(eth, 0, MTK_RST_GL); -- cgit v1.2.3 From 04698cccb1de54d5d97fda2e4a1c6ca365da0f70 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:04 +0200 Subject: net: mediatek: fix threshold value MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The logic to calculate the threshold value for stopping the TX queue is bad. Currently it will always use 1/2 of the rings size, which is way too much. Set the threshold to MAX_SKB_FRAGS. This makes sure that the queue is stopped when there is not enough room to accept an additional segment.  Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index e3dadae9f6dd..032939d211a7 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1033,8 +1033,7 @@ static int mtk_tx_alloc(struct mtk_eth *eth) atomic_set(&ring->free_count, MTK_DMA_SIZE - 2); ring->next_free = &ring->dma[0]; ring->last_free = &ring->dma[MTK_DMA_SIZE - 2]; - ring->thresh = max((unsigned long)MTK_DMA_SIZE >> 2, - MAX_SKB_FRAGS); + ring->thresh = MAX_SKB_FRAGS; /* make sure that all changes to the dma ring are flushed before we * continue -- cgit v1.2.3 From eaadf9fd3f6390f6ecbd0dfbd5997a0486fc9d5e Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:05 +0200 Subject: net: mediatek: increase watchdog_timeo During stress testing, after reducing the threshold value, we have seen TX timeouts that were caused by the watchdog_timeo value being too low. Increase the value to 5 * HZ which is a value commonly used by many other drivers. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 032939d211a7..3b3ba2e55bdc 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1709,7 +1709,7 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np) mac->hw_stats->reg_offset = id * MTK_STAT_OFFSET; SET_NETDEV_DEV(eth->netdev[id], eth->dev); - eth->netdev[id]->watchdog_timeo = HZ; + eth->netdev[id]->watchdog_timeo = 5 * HZ; eth->netdev[id]->netdev_ops = &mtk_netdev_ops; eth->netdev[id]->base_addr = (unsigned long)eth->base; eth->netdev[id]->vlan_features = MTK_HW_FEATURES & -- cgit v1.2.3 From 12c97c13ea7174db5b5dc4a1ef91d4e9245bb569 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:06 +0200 Subject: net: mediatek: fix off by one in the TX ring allocation The TX ring setup has an off by one error causing it to not utilise all descriptors. This has the side effect that we need to reset the next pointer at runtime to make it work. Fix the off by one and remove the code fixing the ring at runtime. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 3b3ba2e55bdc..c097e9e3926c 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -926,7 +926,6 @@ static int mtk_poll_tx(struct mtk_eth *eth, int budget, bool *tx_again) } mtk_tx_unmap(eth->dev, tx_buf); - ring->last_free->txd2 = next_cpu; ring->last_free = desc; atomic_inc(&ring->free_count); @@ -1032,7 +1031,7 @@ static int mtk_tx_alloc(struct mtk_eth *eth) atomic_set(&ring->free_count, MTK_DMA_SIZE - 2); ring->next_free = &ring->dma[0]; - ring->last_free = &ring->dma[MTK_DMA_SIZE - 2]; + ring->last_free = &ring->dma[MTK_DMA_SIZE - 1]; ring->thresh = MAX_SKB_FRAGS; /* make sure that all changes to the dma ring are flushed before we -- cgit v1.2.3 From ad3cba989e8b1bbefe078eece29f0e8d8aaea1d6 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:07 +0200 Subject: net: mediatek: only wake the queue if it is stopped The current code unconditionally wakes up the queue at the end of each tx_poll action. Change the code to only wake up the queues if any of them have actually been stopped before. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index c097e9e3926c..40e37b158a69 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -704,6 +704,20 @@ static inline int mtk_cal_txd_req(struct sk_buff *skb) return nfrags; } +static int mtk_queue_stopped(struct mtk_eth *eth) +{ + int i; + + for (i = 0; i < MTK_MAC_COUNT; i++) { + if (!eth->netdev[i]) + continue; + if (netif_queue_stopped(eth->netdev[i])) + return 1; + } + + return 0; +} + static void mtk_wake_queue(struct mtk_eth *eth) { int i; @@ -950,7 +964,8 @@ static int mtk_poll_tx(struct mtk_eth *eth, int budget, bool *tx_again) if (!total) return 0; - if (atomic_read(&ring->free_count) > ring->thresh) + if (mtk_queue_stopped(eth) && + (atomic_read(&ring->free_count) > ring->thresh)) mtk_wake_queue(eth); return total; -- cgit v1.2.3 From 82c6544dddc6c4bd940917af2f987dee6be0fc17 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:08 +0200 Subject: net: mediatek: remove superfluous queue wake up call The code checks if the queue should be stopped because we are below the threshold of free descriptors only to check if it should be started again. If we do end up in a state where we are at the threshold limit, it makes more sense to just stop the queue and wait for the next IRQ to trigger the TX housekeeping again. There is no rush in enqueuing the next packet, it needs to wait for all the others in the queue to be dispatched first anyway. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 40e37b158a69..d1cdc2d76151 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -783,12 +783,9 @@ static int mtk_start_xmit(struct sk_buff *skb, struct net_device *dev) if (mtk_tx_map(skb, dev, tx_num, ring, gso) < 0) goto drop; - if (unlikely(atomic_read(&ring->free_count) <= ring->thresh)) { + if (unlikely(atomic_read(&ring->free_count) <= ring->thresh)) mtk_stop_queue(eth); - if (unlikely(atomic_read(&ring->free_count) > - ring->thresh)) - mtk_wake_queue(eth); - } + spin_unlock_irqrestore(ð->page_lock, flags); return NETDEV_TX_OK; -- cgit v1.2.3 From a2f27217e4e60e663b5b971b0ccb287a9548b04e Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Fri, 10 Jun 2016 16:53:05 +0200 Subject: net: au1000_eth: fix PHY detection Commit 7f854420fbfe9d49afe2ffb1df052cfe8e215541 ("phy: Add API for {un}registering an mdio device to a bus.") broke PHY detection on this driver with a copy-paste bug: The code is looking 32 times for a PHY at address 0. Fixes ethernet on AMD DB1100/DB1500/DB1550 boards which have their (autodetected) PHYs at address 31. Cc: Andrew Lunn Signed-off-by: Manuel Lauss Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/au1000_eth.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c index e0fb0f1122db..d8c77e8e25ed 100644 --- a/drivers/net/ethernet/amd/au1000_eth.c +++ b/drivers/net/ethernet/amd/au1000_eth.c @@ -508,13 +508,12 @@ static int au1000_mii_probe(struct net_device *dev) /* find the first (lowest address) PHY * on the current MAC's MII bus */ - for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) - if (mdiobus_get_phy(aup->mii_bus, aup->phy_addr)) { - phydev = mdiobus_get_phy(aup->mii_bus, aup->phy_addr); - if (!aup->phy_search_highest_addr) - /* break out with first one found */ - break; - } + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { + phydev = mdiobus_get_phy(aup->mii_bus, phy_addr); + if (phydev && !aup->phy_search_highest_addr) + /* break out with first one found */ + break; + } if (aup->phy1_search_mac0) { /* try harder to find a PHY */ -- cgit v1.2.3 From 86c5fe4c932a8ef2d32f8b3d32cc9f0476fc54f3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 10 Jun 2016 23:34:24 -0700 Subject: Revert "net: au1000_eth: fix PHY detection" This reverts commit a2f27217e4e60e663b5b971b0ccb287a9548b04e. I applied the wrong version of this. Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/au1000_eth.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c index d8c77e8e25ed..e0fb0f1122db 100644 --- a/drivers/net/ethernet/amd/au1000_eth.c +++ b/drivers/net/ethernet/amd/au1000_eth.c @@ -508,12 +508,13 @@ static int au1000_mii_probe(struct net_device *dev) /* find the first (lowest address) PHY * on the current MAC's MII bus */ - for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { - phydev = mdiobus_get_phy(aup->mii_bus, phy_addr); - if (phydev && !aup->phy_search_highest_addr) - /* break out with first one found */ - break; - } + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) + if (mdiobus_get_phy(aup->mii_bus, aup->phy_addr)) { + phydev = mdiobus_get_phy(aup->mii_bus, aup->phy_addr); + if (!aup->phy_search_highest_addr) + /* break out with first one found */ + break; + } if (aup->phy1_search_mac0) { /* try harder to find a PHY */ -- cgit v1.2.3 From 92ca8241533009e4e05a9f3999a75389678af094 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Sat, 11 Jun 2016 00:13:04 +0200 Subject: net: au1000_eth: fix PHY detection Commit 7f854420fbfe9d49afe2ffb1df052cfe8e215541 ("phy: Add API for {un}registering an mdio device to a bus.") broke PHY detection on this driver with a copy-paste bug: The code is looking 32 times for a PHY at address 0. Fixes ethernet on AMD DB1100/DB1500/DB1550 boards which have their (autodetected) PHYs at address 31. Cc: Andrew Lunn Signed-off-by: Manuel Lauss Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/au1000_eth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c index e0fb0f1122db..20760e10211a 100644 --- a/drivers/net/ethernet/amd/au1000_eth.c +++ b/drivers/net/ethernet/amd/au1000_eth.c @@ -509,8 +509,8 @@ static int au1000_mii_probe(struct net_device *dev) * on the current MAC's MII bus */ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) - if (mdiobus_get_phy(aup->mii_bus, aup->phy_addr)) { - phydev = mdiobus_get_phy(aup->mii_bus, aup->phy_addr); + if (mdiobus_get_phy(aup->mii_bus, phy_addr)) { + phydev = mdiobus_get_phy(aup->mii_bus, phy_addr); if (!aup->phy_search_highest_addr) /* break out with first one found */ break; -- cgit v1.2.3 From 6e85dbe4b461e59fa3cad6f6235cb47fa4c6a629 Mon Sep 17 00:00:00 2001 From: Crestez Dan Leonard Date: Fri, 3 Jun 2016 21:30:24 +0300 Subject: iio: inv_mpu6050: Fix use-after-free in ACPI code In some cases this can result in incorrectly returning a negative value from asus_acpi_get_sensor_info and the AK8963 magnetometer failing to show up. Note cpm is an alias for buffer.pointer which isn't apparent in this patch on it's own. Cc: Srinivas Pandruvada Signed-off-by: Crestez Dan Leonard Acked-by: Daniel Baluta Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c index f62b8bd9ad7e..dd6fc6d21f9d 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c @@ -56,6 +56,7 @@ static int asus_acpi_get_sensor_info(struct acpi_device *adev, int i; acpi_status status; union acpi_object *cpm; + int ret; status = acpi_evaluate_object(adev->handle, "CNF0", NULL, &buffer); if (ACPI_FAILURE(status)) @@ -82,10 +83,10 @@ static int asus_acpi_get_sensor_info(struct acpi_device *adev, } } } - + ret = cpm->package.count; kfree(buffer.pointer); - return cpm->package.count; + return ret; } static int acpi_i2c_check_resource(struct acpi_resource *ares, void *data) -- cgit v1.2.3 From 7e982555d89cc84b1fa23b5d54c7ffd9f7753908 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 May 2016 15:50:24 +0200 Subject: staging: iio: fix ad7606_spi regression MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As pointed out by Geert Uytterhoeven, the patch was incorrect and breaks the driver, which was fortunately pointed out by this gcc warning: drivers/staging/iio/adc/ad7606_spi.c: In function ‘ad7606_spi_read_block’: drivers/staging/iio/adc/ad7606_spi.c:34: warning: ‘data’ is used uninitialized in this function The effect of the patch is that the data is copied into a random memory location (from the uninitialized pointer) instead of being byteswapped in place. This adds the initialization for the 'data' variable back to restore the original behavior. Cc: Ksenija Stanojevic Fixes: 87787e5ef727 ("Staging: iio: Fix sparse endian warning") Signed-off-by: Arnd Bergmann Acked-by: Geert Uytterhoeven Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7606_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/iio/adc/ad7606_spi.c b/drivers/staging/iio/adc/ad7606_spi.c index 825da0769936..9587fa86dc69 100644 --- a/drivers/staging/iio/adc/ad7606_spi.c +++ b/drivers/staging/iio/adc/ad7606_spi.c @@ -21,7 +21,7 @@ static int ad7606_spi_read_block(struct device *dev, { struct spi_device *spi = to_spi_device(dev); int i, ret; - unsigned short *data; + unsigned short *data = buf; __be16 *bdata = buf; ret = spi_read(spi, buf, count * 2); -- cgit v1.2.3 From f4070a19142d5ee06f0da0cef56a0e78995f172c Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Wed, 1 Jun 2016 20:25:54 +0100 Subject: staging: iio: ad5933: fix order of cycle conditions Correctly handle the settling time cycles value. The else branch is an impossible condition, > 1022 in the else branch of > 511. Flipping the order. Based on the Table 13 at the bottom of Page 25 of the Data Sheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5933.pdf Signed-off-by: Luis de Bethencourt Reviewed-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/impedance-analyzer/ad5933.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c index 9f43976f4ef2..170ac980abcb 100644 --- a/drivers/staging/iio/impedance-analyzer/ad5933.c +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c @@ -444,10 +444,10 @@ static ssize_t ad5933_store(struct device *dev, st->settling_cycles = val; /* 2x, 4x handling, see datasheet */ - if (val > 511) - val = (val >> 1) | (1 << 9); - else if (val > 1022) + if (val > 1022) val = (val >> 2) | (3 << 9); + else if (val > 511) + val = (val >> 1) | (1 << 9); dat = cpu_to_be16(val); ret = ad5933_i2c_write(st->client, -- cgit v1.2.3 From d941ebe88a411aa281cc80477a93feb931a1b50b Mon Sep 17 00:00:00 2001 From: Ivan Khoronzhuk Date: Sat, 11 Jun 2016 01:11:54 +0300 Subject: net: ethernet: ti: cpsw: use destroy ctlr to destroy channels There is no reason to destroy channels that are destroyed while cpdma_ctlr destroy. In this case no need to remember how much channels where created and destroy them by one, as cpdma_ctlr destroys all of them. Signed-off-by: Ivan Khoronzhuk Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index e6bb0ecb12c7..53190894f17a 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2505,8 +2505,6 @@ static int cpsw_probe(struct platform_device *pdev) clean_ale_ret: cpsw_ale_destroy(priv->ale); clean_dma_ret: - cpdma_chan_destroy(priv->txch); - cpdma_chan_destroy(priv->rxch); cpdma_ctlr_destroy(priv->dma); clean_runtime_disable_ret: pm_runtime_disable(&pdev->dev); @@ -2534,8 +2532,6 @@ static int cpsw_remove(struct platform_device *pdev) unregister_netdev(ndev); cpsw_ale_destroy(priv->ale); - cpdma_chan_destroy(priv->txch); - cpdma_chan_destroy(priv->rxch); cpdma_ctlr_destroy(priv->dma); pm_runtime_disable(&pdev->dev); device_for_each_child(&pdev->dev, NULL, cpsw_remove_child_device); -- cgit v1.2.3 From 975f57fdff1d0eb9816806cabd27162a8a1a4038 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 10 Jun 2016 16:47:02 +1000 Subject: crypto: vmx - Fix ABI detection When calling ppc-xlate.pl, we pass it either linux-ppc64 or linux-ppc64le. The script however was expecting linux64le, a result of its OpenSSL origins. This means we aren't obeying the ppc64le ABIv2 rules. Fix this by checking for linux-ppc64le. Fixes: 5ca55738201c ("crypto: vmx - comply with ABIs that specify vrsave as reserved.") Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard Signed-off-by: Herbert Xu --- drivers/crypto/vmx/ppc-xlate.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/crypto/vmx/ppc-xlate.pl b/drivers/crypto/vmx/ppc-xlate.pl index 9f4994cabcc7..b18e67d0e065 100644 --- a/drivers/crypto/vmx/ppc-xlate.pl +++ b/drivers/crypto/vmx/ppc-xlate.pl @@ -141,7 +141,7 @@ my $vmr = sub { # Some ABIs specify vrsave, special-purpose register #256, as reserved # for system use. -my $no_vrsave = ($flavour =~ /aix|linux64le/); +my $no_vrsave = ($flavour =~ /linux-ppc64le/); my $mtspr = sub { my ($f,$idx,$ra) = @_; if ($idx == 256 && $no_vrsave) { -- cgit v1.2.3 From 12d3f49e1ffbbf8cbbb60acae5a21103c5c841ac Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 10 Jun 2016 16:47:03 +1000 Subject: crypto: vmx - Increase priority of aes-cbc cipher All of the VMX AES ciphers (AES, AES-CBC and AES-CTR) are set at priority 1000. Unfortunately this means we never use AES-CBC and AES-CTR, because the base AES-CBC cipher that is implemented on top of AES inherits its priority. To fix this, AES-CBC and AES-CTR have to be a higher priority. Set them to 2000. Testing on a POWER8 with: cryptsetup benchmark --cipher aes --key-size 256 Shows decryption speed increase from 402.4 MB/s to 3069.2 MB/s, over 7x faster. Thanks to Mike Strosaker for helping me debug this issue. Fixes: 8c755ace357c ("crypto: vmx - Adding CBC routines for VMX module") Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard Signed-off-by: Herbert Xu --- drivers/crypto/vmx/aes_cbc.c | 2 +- drivers/crypto/vmx/aes_ctr.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/crypto/vmx/aes_cbc.c b/drivers/crypto/vmx/aes_cbc.c index 495577b6d31b..94ad5c0adbcb 100644 --- a/drivers/crypto/vmx/aes_cbc.c +++ b/drivers/crypto/vmx/aes_cbc.c @@ -182,7 +182,7 @@ struct crypto_alg p8_aes_cbc_alg = { .cra_name = "cbc(aes)", .cra_driver_name = "p8_aes_cbc", .cra_module = THIS_MODULE, - .cra_priority = 1000, + .cra_priority = 2000, .cra_type = &crypto_blkcipher_type, .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | CRYPTO_ALG_NEED_FALLBACK, .cra_alignmask = 0, diff --git a/drivers/crypto/vmx/aes_ctr.c b/drivers/crypto/vmx/aes_ctr.c index 0a3c1b04cf3c..38ed10d761d0 100644 --- a/drivers/crypto/vmx/aes_ctr.c +++ b/drivers/crypto/vmx/aes_ctr.c @@ -166,7 +166,7 @@ struct crypto_alg p8_aes_ctr_alg = { .cra_name = "ctr(aes)", .cra_driver_name = "p8_aes_ctr", .cra_module = THIS_MODULE, - .cra_priority = 1000, + .cra_priority = 2000, .cra_type = &crypto_blkcipher_type, .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | CRYPTO_ALG_NEED_FALLBACK, .cra_alignmask = 0, -- cgit v1.2.3 From 19ced623db2fe91604d69f7d86b03144c5107739 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 8 Jun 2016 14:56:39 +0200 Subject: crypto: ux500 - memmove the right size The hash buffer is really HASH_BLOCK_SIZE bytes, someone must have thought that memmove takes n*u32 words by mistake. Tests work as good/bad as before after this patch. Cc: Joakim Bech Cc: stable@vger.kernel.org Reported-by: David Binderman Signed-off-by: Linus Walleij Signed-off-by: Herbert Xu --- drivers/crypto/ux500/hash/hash_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c index 574e87c7f2b8..9acccad26928 100644 --- a/drivers/crypto/ux500/hash/hash_core.c +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -781,7 +781,7 @@ static int hash_process_data(struct hash_device_data *device_data, &device_data->state); memmove(req_ctx->state.buffer, device_data->state.buffer, - HASH_BLOCK_SIZE / sizeof(u32)); + HASH_BLOCK_SIZE); if (ret) { dev_err(device_data->dev, "%s: hash_resume_state() failed!\n", @@ -832,7 +832,7 @@ static int hash_process_data(struct hash_device_data *device_data, memmove(device_data->state.buffer, req_ctx->state.buffer, - HASH_BLOCK_SIZE / sizeof(u32)); + HASH_BLOCK_SIZE); if (ret) { dev_err(device_data->dev, "%s: hash_save_state() failed!\n", __func__); -- cgit v1.2.3 From 053ae6499a5634c0dc5fa18437e1af3d2f2ec98e Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 13 Jun 2016 13:48:53 +0800 Subject: gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock Fixes: 9ae482104cb9 ("gpio: 104-idi-48: Clear pending interrupt once in IRQ handler") Signed-off-by: Axel Lin Acked-by: William Breathitt Gray Signed-off-by: Linus Walleij --- drivers/gpio/gpio-104-idi-48.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c index 6c75c83baf5a..2d2763ea1a68 100644 --- a/drivers/gpio/gpio-104-idi-48.c +++ b/drivers/gpio/gpio-104-idi-48.c @@ -247,6 +247,7 @@ static int idi_48_probe(struct device *dev, unsigned int id) idi48gpio->irq = irq[id]; spin_lock_init(&idi48gpio->lock); + spin_lock_init(&idi48gpio->ack_lock); dev_set_drvdata(dev, idi48gpio); -- cgit v1.2.3 From ea1d39a31d3b1b6060b6e83e5a29c069a124c68a Mon Sep 17 00:00:00 2001 From: Oscar Date: Tue, 14 Jun 2016 14:14:35 +0800 Subject: usb: common: otg-fsm: add license to usb-otg-fsm Fix warning about tainted kernel because usb-otg-fsm has no license. WARNING: with this patch usb-otg-fsm module can be loaded but then the kernel will hang. Tested with a udoo quad board. Cc: #v4.1+ Signed-off-by: Oscar Signed-off-by: Peter Chen --- drivers/usb/common/usb-otg-fsm.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c index 9059b7dc185e..2f537bbdda09 100644 --- a/drivers/usb/common/usb-otg-fsm.c +++ b/drivers/usb/common/usb-otg-fsm.c @@ -21,6 +21,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include @@ -450,3 +451,4 @@ int otg_statemachine(struct otg_fsm *fsm) return fsm->state_changed; } EXPORT_SYMBOL_GPL(otg_statemachine); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 6d9fe44bd73d567d04d3a68a2d2fa521ab9532f2 Mon Sep 17 00:00:00 2001 From: Michal Suchanek Date: Mon, 13 Jun 2016 17:46:49 +0000 Subject: spi: sun4i: fix FIFO limit When testing SPI without DMA I noticed that filling the FIFO on the spi controller causes timeout. Always leave room for one byte in the FIFO. Signed-off-by: Michal Suchanek Acked-by: Maxime Ripard Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-sun4i.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c index 1ddd9e2309b6..e7e4aecb3295 100644 --- a/drivers/spi/spi-sun4i.c +++ b/drivers/spi/spi-sun4i.c @@ -179,7 +179,10 @@ static int sun4i_spi_transfer_one(struct spi_master *master, /* We don't support transfer larger than the FIFO */ if (tfr->len > SUN4I_FIFO_DEPTH) - return -EINVAL; + return -EMSGSIZE; + + if (tfr->tx_buf && tfr->len >= SUN4I_FIFO_DEPTH) + return -EMSGSIZE; reinit_completion(&sspi->done); sspi->tx_buf = tfr->tx_buf; @@ -269,8 +272,12 @@ static int sun4i_spi_transfer_one(struct spi_master *master, sun4i_spi_write(sspi, SUN4I_BURST_CNT_REG, SUN4I_BURST_CNT(tfr->len)); sun4i_spi_write(sspi, SUN4I_XMIT_CNT_REG, SUN4I_XMIT_CNT(tx_len)); - /* Fill the TX FIFO */ - sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH); + /* + * Fill the TX FIFO + * Filling the FIFO fully causes timeout for some reason + * at least on spi2 on A10s + */ + sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH - 1); /* Enable the interrupts */ sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, SUN4I_INT_CTL_TC); -- cgit v1.2.3 From 719bd6542044efd9b338a53dba1bef45f40ca169 Mon Sep 17 00:00:00 2001 From: Michal Suchanek Date: Mon, 13 Jun 2016 17:46:49 +0000 Subject: spi: sunxi: fix transfer timeout The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over 1MHz SPI bus takes way longer than that. Calculate the timeout from the actual time the transfer is supposed to take and multiply by 2 for good measure. Signed-off-by: Michal Suchanek Acked-by: Maxime Ripard Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-sun4i.c | 10 +++++++++- drivers/spi/spi-sun6i.c | 10 +++++++++- 2 files changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c index e7e4aecb3295..cf007f3b83ec 100644 --- a/drivers/spi/spi-sun4i.c +++ b/drivers/spi/spi-sun4i.c @@ -173,6 +173,7 @@ static int sun4i_spi_transfer_one(struct spi_master *master, { struct sun4i_spi *sspi = spi_master_get_devdata(master); unsigned int mclk_rate, div, timeout; + unsigned int start, end, tx_time; unsigned int tx_len = 0; int ret = 0; u32 reg; @@ -286,9 +287,16 @@ static int sun4i_spi_transfer_one(struct spi_master *master, reg = sun4i_spi_read(sspi, SUN4I_CTL_REG); sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH); + tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U); + start = jiffies; timeout = wait_for_completion_timeout(&sspi->done, - msecs_to_jiffies(1000)); + msecs_to_jiffies(tx_time)); + end = jiffies; if (!timeout) { + dev_warn(&master->dev, + "%s: timeout transferring %u bytes@%iHz for %i(%i)ms", + dev_name(&spi->dev), tfr->len, tfr->speed_hz, + jiffies_to_msecs(end - start), tx_time); ret = -ETIMEDOUT; goto out; } diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index 42e2c4bd690a..7fce79a60608 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -160,6 +160,7 @@ static int sun6i_spi_transfer_one(struct spi_master *master, { struct sun6i_spi *sspi = spi_master_get_devdata(master); unsigned int mclk_rate, div, timeout; + unsigned int start, end, tx_time; unsigned int tx_len = 0; int ret = 0; u32 reg; @@ -269,9 +270,16 @@ static int sun6i_spi_transfer_one(struct spi_master *master, reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG); sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH); + tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U); + start = jiffies; timeout = wait_for_completion_timeout(&sspi->done, - msecs_to_jiffies(1000)); + msecs_to_jiffies(tx_time)); + end = jiffies; if (!timeout) { + dev_warn(&master->dev, + "%s: timeout transferring %u bytes@%iHz for %i(%i)ms", + dev_name(&spi->dev), tfr->len, tfr->speed_hz, + jiffies_to_msecs(end - start), tx_time); ret = -ETIMEDOUT; goto out; } -- cgit v1.2.3 From 4b2312bd0592708c85ed94368c874819e7013309 Mon Sep 17 00:00:00 2001 From: Harvey Hunt Date: Mon, 23 May 2016 12:05:52 +0100 Subject: irqchip/mips-gic: Fix IRQs in gic_dev_domain When allocating a new device IRQ, gic_dev_domain_alloc() correctly calls irq_domain_set_hwirq_and_chip(), but gic_irq_domain_alloc() does not. This means that gic_irq_domain believes all IRQs from the dev domain have an hwirq of 0 and creates incorrect mappings in the linear_revmap. As gic_irq_domain is a parent of the gic_dev_domain, this leads to an inability to boot on devices with a GIC. Excerpt of the error: [ 2.297649] irq 0: nobody cared (try booting with the "irqpoll" option) ... [ 2.436963] handlers: [ 2.439492] Disabling IRQ #0 Fix this by calling irq_domain_set_hwirq_and_chip() for both the dev and irq domain. Now that we are modifying the parent domain, be sure to clear it up in case of an allocation error. Fixes: c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") Fixes: 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") Signed-off-by: Harvey Hunt Tested-by: Govindraj Raja # On Pistachio SoC Reviewed-by: Matt Redfearn Cc: linux-mips@linux-mips.org Cc: Qais Yousef Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1464001552-31174-1-git-send-email-harvey.hunt@imgtec.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-mips-gic.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index 3b5e10aa48ab..8a4adbeb2b8c 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -746,6 +746,12 @@ static int gic_irq_domain_alloc(struct irq_domain *d, unsigned int virq, /* verify that it doesn't conflict with an IPI irq */ if (test_bit(spec->hwirq, ipi_resrv)) return -EBUSY; + + hwirq = GIC_SHARED_TO_HWIRQ(spec->hwirq); + + return irq_domain_set_hwirq_and_chip(d, virq, hwirq, + &gic_level_irq_controller, + NULL); } else { base_hwirq = find_first_bit(ipi_resrv, gic_shared_intrs); if (base_hwirq == gic_shared_intrs) { @@ -867,10 +873,14 @@ static int gic_dev_domain_alloc(struct irq_domain *d, unsigned int virq, &gic_level_irq_controller, NULL); if (ret) - return ret; + goto error; } return 0; + +error: + irq_domain_free_irqs_parent(d, virq, nr_irqs); + return ret; } void gic_dev_domain_free(struct irq_domain *d, unsigned int virq, -- cgit v1.2.3 From e50525bef593c3dd0564df676c567d77f7c20322 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 9 Jun 2016 11:33:55 +0530 Subject: ath10k: fix deadlock while processing rx_in_ord_ind commit 5c86d97bcc1d ("ath10k: combine txrx and replenish task") introduced deadlock while processing rx in order indication message for qca6174 based devices. While merging replenish and txrx tasklets, replenish task should be called out of htt rx ring locking since it is also try to acquire the same lock. Unfortunately this issue is not exposed by other solutions (qca988x, qca99x0 & qca4019), as rx_in_ord_ind message is specific to qca6174 based devices. This patch fixes ============================================= [ INFO: possible recursive locking detected ] 4.7.0-rc2-wt-ath+ #1353 Tainted: G E --------------------------------------------- swapper/3/0 is trying to acquire lock: (&(&htt->rx_ring.lock)->rlock){+.-...}, at: [] ath10k_htt_rx_msdu_buff_replenish+0x29/0x90 [ath10k_core] but task is already holding lock: (&(&htt->rx_ring.lock)->rlock){+.-...}, at: [] ath10k_htt_txrx_compl_task+0x21b/0x250 [ath10k_core] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&htt->rx_ring.lock)->rlock); lock(&(&htt->rx_ring.lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by swapper/3/0: #0: (&(&htt->rx_ring.lock)->rlock){+.-...}, at: [] ath10k_htt_txrx_compl_task+0x21b/0x250 [ath10k_core] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=119151 Fixes: 5c86d97bcc1d ("ath10k: combine txrx and replenish task") Reported-by: Mike Lothian Signed-off-by: Rajkumar Manoharan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/htt_rx.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index cc979a4faeb0..813cdd2621a1 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -1904,7 +1904,6 @@ static void ath10k_htt_rx_in_ord_ind(struct ath10k *ar, struct sk_buff *skb) return; } } - ath10k_htt_rx_msdu_buff_replenish(htt); } static void ath10k_htt_rx_tx_fetch_resp_id_confirm(struct ath10k *ar, -- cgit v1.2.3 From e024111f6946f45cf1559a8c6fd48d2d0f696d07 Mon Sep 17 00:00:00 2001 From: Miaoqing Pan Date: Tue, 7 Jun 2016 15:47:07 +0300 Subject: ath9k: fix GPIO mask for AR9462 and AR9565 The incorrect GPIO mask cause kernel warning, when AR9462 access GPIO11. Also fix the mask for AR9565. WARNING: CPU: 1 PID: 199 at ../drivers/net/wireless/ath/ath9k/hw.c:2778 ath9k_hw_gpio_get+0x1a9/0x1b0 [ath9k_hw] CPU: 1 PID: 199 Comm: kworker/u16:9 Not tainted 4.7.0-rc1-next-20160530+ #5 Hardware name: Acer TravelMate P243/BA40_HC, BIOS V1.01 04/20/2012 Workqueue: events_power_efficient rfkill_poll 0000000000000000 ffff88002cf73d28 ffffffff813b8ddc 0000000000000000 0000000000000000 ffff88002cf73d68 ffffffff8107a331 00000ada00000086 ffff880148d9c018 000000000000000b ffff880147e68720 0000000000000200 Call Trace: [] dump_stack+0x63/0x87 [] __warn+0xd1/0xf0 [] warn_slowpath_null+0x1d/0x20 [] ath9k_hw_gpio_get+0x1a9/0x1b0 [ath9k_hw] [] ath9k_rfkill_poll_state+0x34/0x60 [ath9k] [] ieee80211_rfkill_poll+0x33/0x40 [mac80211] [] cfg80211_rfkill_poll+0x2a/0xc0 [cfg80211] [] rfkill_poll+0x24/0x50 [] process_one_work+0x153/0x3f0 [] worker_thread+0x12b/0x4b0 [] ? rescuer_thread+0x340/0x340 [] kthread+0xc9/0xe0 [] ret_from_fork+0x1f/0x40 [] ? kthread_park+0x60/0x60 Fixes: a01ab81b09c5 ("ath9k: define correct GPIO numbers and bits mask") Reported-by: Sudip Mukherjee Tested-by: Sudip Mukherjee Signed-off-by: Miaoqing Pan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/reg.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 9272ca90632b..80ff69f99229 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -1122,12 +1122,12 @@ enum { #define AR9300_NUM_GPIO 16 #define AR9330_NUM_GPIO 16 #define AR9340_NUM_GPIO 23 -#define AR9462_NUM_GPIO 10 +#define AR9462_NUM_GPIO 14 #define AR9485_NUM_GPIO 12 #define AR9531_NUM_GPIO 18 #define AR9550_NUM_GPIO 24 #define AR9561_NUM_GPIO 23 -#define AR9565_NUM_GPIO 12 +#define AR9565_NUM_GPIO 14 #define AR9580_NUM_GPIO 16 #define AR7010_NUM_GPIO 16 @@ -1139,12 +1139,12 @@ enum { #define AR9300_GPIO_MASK 0x0000F4FF #define AR9330_GPIO_MASK 0x0000F4FF #define AR9340_GPIO_MASK 0x0000000F -#define AR9462_GPIO_MASK 0x000003FF +#define AR9462_GPIO_MASK 0x00003FFF #define AR9485_GPIO_MASK 0x00000FFF #define AR9531_GPIO_MASK 0x0000000F #define AR9550_GPIO_MASK 0x0000000F #define AR9561_GPIO_MASK 0x0000000F -#define AR9565_GPIO_MASK 0x00000FFF +#define AR9565_GPIO_MASK 0x00003FFF #define AR9580_GPIO_MASK 0x0000F4FF #define AR7010_GPIO_MASK 0x0000FFFF -- cgit v1.2.3 From 5bc28b93a36e3cb3acc2870fb75cb6ffb182fece Mon Sep 17 00:00:00 2001 From: Rhyland Klein Date: Thu, 9 Jun 2016 17:28:39 -0400 Subject: power_supply: power_supply_read_temp only if use_cnt > 0 Change power_supply_read_temp() to use power_supply_get_property() so that it will check the use_cnt and ensure it is > 0. The use_cnt will be incremented at the end of __power_supply_register, so this will block to case where get_property can be called before the supply is fully registered. This fixes the issue show in the stack below: [ 1.452598] power_supply_read_temp+0x78/0x80 [ 1.458680] thermal_zone_get_temp+0x5c/0x11c [ 1.464765] thermal_zone_device_update+0x34/0xb4 [ 1.471195] thermal_zone_device_register+0x87c/0x8cc [ 1.477974] __power_supply_register+0x364/0x424 [ 1.484317] power_supply_register_no_ws+0x10/0x18 [ 1.490833] bq27xxx_battery_setup+0x10c/0x164 [ 1.497003] bq27xxx_battery_i2c_probe+0xd0/0x1b0 [ 1.503435] i2c_device_probe+0x174/0x240 [ 1.509172] driver_probe_device+0x1fc/0x29c [ 1.515167] __driver_attach+0xa4/0xa8 [ 1.520643] bus_for_each_dev+0x58/0x98 [ 1.526204] driver_attach+0x20/0x28 [ 1.531505] bus_add_driver+0x1c8/0x22c [ 1.537067] driver_register+0x68/0x108 [ 1.542630] i2c_register_driver+0x38/0x7c [ 1.548457] bq27xxx_battery_i2c_driver_init+0x18/0x20 [ 1.555321] do_one_initcall+0x38/0x12c [ 1.560886] kernel_init_freeable+0x148/0x1ec [ 1.566972] kernel_init+0x10/0xfc [ 1.572101] ret_from_fork+0x10/0x40 Also make the same change to ps_get_max_charge_cntl_limit() and ps_get_cur_chrage_cntl_limit() to be safe. Lastly, change the return value of power_supply_get_property() to -EAGAIN from -ENODEV if use_cnt <= 0. Fixes: 297d716f6260 ("power_supply: Change ownership from driver to core") Cc: stable@vger.kernel.org Signed-off-by: Rhyland Klein Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sebastian Reichel --- drivers/power/power_supply_core.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c index 456987c88baa..b13cd074c52a 100644 --- a/drivers/power/power_supply_core.c +++ b/drivers/power/power_supply_core.c @@ -565,11 +565,12 @@ static int power_supply_read_temp(struct thermal_zone_device *tzd, WARN_ON(tzd == NULL); psy = tzd->devdata; - ret = psy->desc->get_property(psy, POWER_SUPPLY_PROP_TEMP, &val); + ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_TEMP, &val); + if (ret) + return ret; /* Convert tenths of degree Celsius to milli degree Celsius. */ - if (!ret) - *temp = val.intval * 100; + *temp = val.intval * 100; return ret; } @@ -612,10 +613,12 @@ static int ps_get_max_charge_cntl_limit(struct thermal_cooling_device *tcd, int ret; psy = tcd->devdata; - ret = psy->desc->get_property(psy, - POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, &val); - if (!ret) - *state = val.intval; + ret = power_supply_get_property(psy, + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, &val); + if (ret) + return ret; + + *state = val.intval; return ret; } @@ -628,10 +631,12 @@ static int ps_get_cur_chrage_cntl_limit(struct thermal_cooling_device *tcd, int ret; psy = tcd->devdata; - ret = psy->desc->get_property(psy, - POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, &val); - if (!ret) - *state = val.intval; + ret = power_supply_get_property(psy, + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, &val); + if (ret) + return ret; + + *state = val.intval; return ret; } -- cgit v1.2.3 From fdecf36fcefa9f48c2f2de21c8176f1a8ce2c960 Mon Sep 17 00:00:00 2001 From: Clemens Gruber Date: Sat, 11 Jun 2016 17:21:26 +0200 Subject: phy: marvell: fix LED configuration via marvell,reg-init Configuring the PHY LED registers for the Marvell 88E1510 and others is not possible, because regardless of the values in marvell,reg-init, it is later overridden in m88e1121_config_aneg with a non-standard default. This patch moves that default configuration to .config_init to allow setting the LED configuration through marvell,reg-init in the device tree, which should override said default if it exists. Signed-off-by: Clemens Gruber Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 38 ++++++++++++++++++++++++++------------ 1 file changed, 26 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 280e8795b463..79ccc11facc3 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -407,15 +407,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev) if (err < 0) return err; - oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); - - phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); - phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF); - phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); - - err = genphy_config_aneg(phydev); - - return err; + return genphy_config_aneg(phydev); } static int m88e1318_config_aneg(struct phy_device *phydev) @@ -636,6 +628,28 @@ static int m88e1111_config_init(struct phy_device *phydev) return phy_write(phydev, MII_BMCR, BMCR_RESET); } +static int m88e1121_config_init(struct phy_device *phydev) +{ + int err, oldpage; + + oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); + + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); + if (err < 0) + return err; + + /* Default PHY LED config: LED[0] .. Link, LED[1] .. Activity */ + err = phy_write(phydev, MII_88E1121_PHY_LED_CTRL, + MII_88E1121_PHY_LED_DEF); + if (err < 0) + return err; + + phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); + + /* Set marvell,reg-init configuration from device tree */ + return marvell_config_init(phydev); +} + static int m88e1510_config_init(struct phy_device *phydev) { int err; @@ -668,7 +682,7 @@ static int m88e1510_config_init(struct phy_device *phydev) return err; } - return marvell_config_init(phydev); + return m88e1121_config_init(phydev); } static int m88e1118_config_aneg(struct phy_device *phydev) @@ -1196,7 +1210,7 @@ static struct phy_driver marvell_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, - .config_init = &marvell_config_init, + .config_init = &m88e1121_config_init, .config_aneg = &m88e1121_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, @@ -1215,7 +1229,7 @@ static struct phy_driver marvell_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, - .config_init = &marvell_config_init, + .config_init = &m88e1121_config_init, .config_aneg = &m88e1318_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, -- cgit v1.2.3 From 881d0327db37ad917a367c77aff1afa1ee41e0a9 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Sun, 12 Jun 2016 17:36:37 +0800 Subject: net: alx: Work around the DMA RX overflow issue Commit 26c5f03 uses a new skb allocator to avoid the RFD overflow issue. But from debugging without datasheet, we found the error always happen when the DMA RX address is set to 0x....fc0, which is very likely to be a HW/silicon problem. So one idea is instead of adding a new allocator, why not just hitting the right target by avaiding the error-prone DMA address? This patch will actually * Remove the commit 26c5f03 * Apply rx skb with 64 bytes longer space, and if the allocated skb has a 0x...fc0 address, it will use skb_resever(skb, 64) to advance the address, so that the RX overflow can be avoided. In theory this method should also apply to atl1c driver, which I can't find anyone who can help to test on real devices. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761 Signed-off-by: Feng Tang Suggested-by: Eric Dumazet Tested-by: Ole Lukoie Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/alx/alx.h | 4 --- drivers/net/ethernet/atheros/alx/main.c | 61 ++++++++------------------------- 2 files changed, 14 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/atheros/alx/alx.h b/drivers/net/ethernet/atheros/alx/alx.h index d02c4240b7df..8fc93c5f6abc 100644 --- a/drivers/net/ethernet/atheros/alx/alx.h +++ b/drivers/net/ethernet/atheros/alx/alx.h @@ -96,10 +96,6 @@ struct alx_priv { unsigned int rx_ringsz; unsigned int rxbuf_size; - struct page *rx_page; - unsigned int rx_page_offset; - unsigned int rx_frag_size; - struct napi_struct napi; struct alx_tx_queue txq; struct alx_rx_queue rxq; diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index c98acdc0d14f..e708e360a9e3 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -70,35 +70,6 @@ static void alx_free_txbuf(struct alx_priv *alx, int entry) } } -static struct sk_buff *alx_alloc_skb(struct alx_priv *alx, gfp_t gfp) -{ - struct sk_buff *skb; - struct page *page; - - if (alx->rx_frag_size > PAGE_SIZE) - return __netdev_alloc_skb(alx->dev, alx->rxbuf_size, gfp); - - page = alx->rx_page; - if (!page) { - alx->rx_page = page = alloc_page(gfp); - if (unlikely(!page)) - return NULL; - alx->rx_page_offset = 0; - } - - skb = build_skb(page_address(page) + alx->rx_page_offset, - alx->rx_frag_size); - if (likely(skb)) { - alx->rx_page_offset += alx->rx_frag_size; - if (alx->rx_page_offset >= PAGE_SIZE) - alx->rx_page = NULL; - else - get_page(page); - } - return skb; -} - - static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) { struct alx_rx_queue *rxq = &alx->rxq; @@ -115,9 +86,22 @@ static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) while (!cur_buf->skb && next != rxq->read_idx) { struct alx_rfd *rfd = &rxq->rfd[cur]; - skb = alx_alloc_skb(alx, gfp); + /* + * When DMA RX address is set to something like + * 0x....fc0, it will be very likely to cause DMA + * RFD overflow issue. + * + * To work around it, we apply rx skb with 64 bytes + * longer space, and offset the address whenever + * 0x....fc0 is detected. + */ + skb = __netdev_alloc_skb(alx->dev, alx->rxbuf_size + 64, gfp); if (!skb) break; + + if (((unsigned long)skb->data & 0xfff) == 0xfc0) + skb_reserve(skb, 64); + dma = dma_map_single(&alx->hw.pdev->dev, skb->data, alx->rxbuf_size, DMA_FROM_DEVICE); @@ -153,7 +137,6 @@ static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) alx_write_mem16(&alx->hw, ALX_RFD_PIDX, cur); } - return count; } @@ -622,11 +605,6 @@ static void alx_free_rings(struct alx_priv *alx) kfree(alx->txq.bufs); kfree(alx->rxq.bufs); - if (alx->rx_page) { - put_page(alx->rx_page); - alx->rx_page = NULL; - } - dma_free_coherent(&alx->hw.pdev->dev, alx->descmem.size, alx->descmem.virt, @@ -681,7 +659,6 @@ static int alx_request_irq(struct alx_priv *alx) alx->dev->name, alx); if (!err) goto out; - /* fall back to legacy interrupt */ pci_disable_msi(alx->hw.pdev); } @@ -725,7 +702,6 @@ static int alx_init_sw(struct alx_priv *alx) struct pci_dev *pdev = alx->hw.pdev; struct alx_hw *hw = &alx->hw; int err; - unsigned int head_size; err = alx_identify_hw(alx); if (err) { @@ -741,12 +717,7 @@ static int alx_init_sw(struct alx_priv *alx) hw->smb_timer = 400; hw->mtu = alx->dev->mtu; - alx->rxbuf_size = ALX_MAX_FRAME_LEN(hw->mtu); - head_size = SKB_DATA_ALIGN(alx->rxbuf_size + NET_SKB_PAD) + - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); - alx->rx_frag_size = roundup_pow_of_two(head_size); - alx->tx_ringsz = 256; alx->rx_ringsz = 512; hw->imt = 200; @@ -848,7 +819,6 @@ static int alx_change_mtu(struct net_device *netdev, int mtu) { struct alx_priv *alx = netdev_priv(netdev); int max_frame = ALX_MAX_FRAME_LEN(mtu); - unsigned int head_size; if ((max_frame < ALX_MIN_FRAME_SIZE) || (max_frame > ALX_MAX_FRAME_SIZE)) @@ -860,9 +830,6 @@ static int alx_change_mtu(struct net_device *netdev, int mtu) netdev->mtu = mtu; alx->hw.mtu = mtu; alx->rxbuf_size = max(max_frame, ALX_DEF_RXBUF_SIZE); - head_size = SKB_DATA_ALIGN(alx->rxbuf_size + NET_SKB_PAD) + - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); - alx->rx_frag_size = roundup_pow_of_two(head_size); netdev_update_features(netdev); if (netif_running(netdev)) alx_reinit(alx); -- cgit v1.2.3 From 8beb330044d0d1878c7b92290e91c0b889e92633 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Mon, 13 Jun 2016 22:00:07 -0700 Subject: 53c700: fix BUG on untagged commands The untagged command case in the 53c700 driver has been broken since host wide tags were enabled because the replaced scsi_find_tag() function had a special case for the tag value SCSI_NO_TAG to retrieve sdev->current_cmnd. The replacement function scsi_host_find_tag() has no such special case and returns NULL causing untagged commands to trigger a BUG() in the driver. Inspection shows that the 53c700 is the only driver using this SCSI_NO_TAG case, so a local fix in the driver suffices to fix this problem globally. Fixes: 64d513ac31b - "scsi: use host wide tags by default" Cc: stable@vger.kernel.org # 4.4+ Reported-by: Helge Deller Tested-by: Helge Deller Signed-off-by: James Bottomley Reviewed-by: Johannes Thumshirn Reviewed-by: Ewan D. Milne Acked-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/53c700.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c index d4c285688ce9..3ddc85e6efd6 100644 --- a/drivers/scsi/53c700.c +++ b/drivers/scsi/53c700.c @@ -1122,7 +1122,7 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp, } else { struct scsi_cmnd *SCp; - SCp = scsi_host_find_tag(SDp->host, SCSI_NO_TAG); + SCp = SDp->current_cmnd; if(unlikely(SCp == NULL)) { sdev_printk(KERN_ERR, SDp, "no saved request for untagged cmd\n"); @@ -1826,7 +1826,7 @@ NCR_700_queuecommand_lck(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *) slot->tag, slot); } else { slot->tag = SCSI_NO_TAG; - /* must populate current_cmnd for scsi_host_find_tag to work */ + /* save current command for reselection */ SCp->device->current_cmnd = SCp; } /* sanity check: some of the commands generated by the mid-layer -- cgit v1.2.3 From 106da663ff495e0aea3ac15b8317aa410754fcac Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 13 Jun 2016 10:31:04 +0200 Subject: ovs/gre,geneve: fix error path when creating an iface After ipgre_newlink()/geneve_configure() call, the netdev is registered. Fixes: 7e059158d57b ("vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices") CC: David Wragg Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- drivers/net/geneve.c | 10 +++++++--- net/ipv4/ip_gre.c | 10 +++++++--- 2 files changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index cadefe4fdaa2..086c2dae4c3d 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -1508,6 +1508,7 @@ struct net_device *geneve_dev_create_fb(struct net *net, const char *name, { struct nlattr *tb[IFLA_MAX + 1]; struct net_device *dev; + LIST_HEAD(list_kill); int err; memset(tb, 0, sizeof(tb)); @@ -1519,8 +1520,10 @@ struct net_device *geneve_dev_create_fb(struct net *net, const char *name, err = geneve_configure(net, dev, &geneve_remote_unspec, 0, 0, 0, 0, htons(dst_port), true, GENEVE_F_UDP_ZERO_CSUM6_RX); - if (err) - goto err; + if (err) { + free_netdev(dev); + return ERR_PTR(err); + } /* openvswitch users expect packet sizes to be unrestricted, * so set the largest MTU we can. @@ -1532,7 +1535,8 @@ struct net_device *geneve_dev_create_fb(struct net *net, const char *name, return dev; err: - free_netdev(dev); + geneve_dellink(dev, &list_kill); + unregister_netdevice_many(&list_kill); return ERR_PTR(err); } EXPORT_SYMBOL_GPL(geneve_dev_create_fb); diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 4d2025f7ec57..08deba679c8c 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -1121,6 +1121,7 @@ struct net_device *gretap_fb_dev_create(struct net *net, const char *name, { struct nlattr *tb[IFLA_MAX + 1]; struct net_device *dev; + LIST_HEAD(list_kill); struct ip_tunnel *t; int err; @@ -1136,8 +1137,10 @@ struct net_device *gretap_fb_dev_create(struct net *net, const char *name, t->collect_md = true; err = ipgre_newlink(net, dev, tb, NULL); - if (err < 0) - goto out; + if (err < 0) { + free_netdev(dev); + return ERR_PTR(err); + } /* openvswitch users expect packet sizes to be unrestricted, * so set the largest MTU we can. @@ -1148,7 +1151,8 @@ struct net_device *gretap_fb_dev_create(struct net *net, const char *name, return dev; out: - free_netdev(dev); + ip_tunnel_dellink(dev, &list_kill); + unregister_netdevice_many(&list_kill); return ERR_PTR(err); } EXPORT_SYMBOL_GPL(gretap_fb_dev_create); -- cgit v1.2.3 From cf5da330bbdd0c06b05c525a3d1d58ccd82c87a6 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 13 Jun 2016 10:31:05 +0200 Subject: ovs/vxlan: fix rtnl notifications on iface deletion The function vxlan_dev_create() (only used by ovs) never calls rtnl_configure_link(). The consequence is that dev->rtnl_link_state is never set to RTNL_LINK_INITIALIZED. During the deletion phase, the function rollback_registered_many() sends a RTM_DELLINK only if dev->rtnl_link_state is set to RTNL_LINK_INITIALIZED. Note that the function vxlan_dev_create() is moved after the rtnl stuff so that vxlan_dellink() can be called in this function. Fixes: dcc38c033b32 ("openvswitch: Re-add CONFIG_OPENVSWITCH_VXLAN") CC: Thomas Graf CC: Pravin B Shelar Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 58 +++++++++++++++++++++++++++++++---------------------- 1 file changed, 34 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index f999db2f97b4..b3b9db68f758 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2952,30 +2952,6 @@ static int vxlan_dev_configure(struct net *src_net, struct net_device *dev, return 0; } -struct net_device *vxlan_dev_create(struct net *net, const char *name, - u8 name_assign_type, struct vxlan_config *conf) -{ - struct nlattr *tb[IFLA_MAX+1]; - struct net_device *dev; - int err; - - memset(&tb, 0, sizeof(tb)); - - dev = rtnl_create_link(net, name, name_assign_type, - &vxlan_link_ops, tb); - if (IS_ERR(dev)) - return dev; - - err = vxlan_dev_configure(net, dev, conf); - if (err < 0) { - free_netdev(dev); - return ERR_PTR(err); - } - - return dev; -} -EXPORT_SYMBOL_GPL(vxlan_dev_create); - static int vxlan_newlink(struct net *src_net, struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { @@ -3268,6 +3244,40 @@ static struct rtnl_link_ops vxlan_link_ops __read_mostly = { .get_link_net = vxlan_get_link_net, }; +struct net_device *vxlan_dev_create(struct net *net, const char *name, + u8 name_assign_type, + struct vxlan_config *conf) +{ + struct nlattr *tb[IFLA_MAX + 1]; + struct net_device *dev; + int err; + + memset(&tb, 0, sizeof(tb)); + + dev = rtnl_create_link(net, name, name_assign_type, + &vxlan_link_ops, tb); + if (IS_ERR(dev)) + return dev; + + err = vxlan_dev_configure(net, dev, conf); + if (err < 0) { + free_netdev(dev); + return ERR_PTR(err); + } + + err = rtnl_configure_link(dev, NULL); + if (err < 0) { + LIST_HEAD(list_kill); + + vxlan_dellink(dev, &list_kill); + unregister_netdevice_many(&list_kill); + return ERR_PTR(err); + } + + return dev; +} +EXPORT_SYMBOL_GPL(vxlan_dev_create); + static void vxlan_handle_lowerdev_unregister(struct vxlan_net *vn, struct net_device *dev) { -- cgit v1.2.3 From 41009481b690493c169ce85f591b9d32c6fd9422 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 13 Jun 2016 10:31:07 +0200 Subject: ovs/geneve: fix rtnl notifications on iface deletion The function geneve_dev_create_fb() (only used by ovs) never calls rtnl_configure_link(). The consequence is that dev->rtnl_link_state is never set to RTNL_LINK_INITIALIZED. During the deletion phase, the function rollback_registered_many() sends a RTM_DELLINK only if dev->rtnl_link_state is set to RTNL_LINK_INITIALIZED. Fixes: e305ac6cf5a1 ("geneve: Add support to collect tunnel metadata.") CC: Pravin B Shelar CC: Jesse Gross CC: Thomas Graf Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- drivers/net/geneve.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 086c2dae4c3d..305a04e45a13 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -1532,6 +1532,10 @@ struct net_device *geneve_dev_create_fb(struct net *net, const char *name, if (err) goto err; + err = rtnl_configure_link(dev, NULL); + if (err < 0) + goto err; + return dev; err: -- cgit v1.2.3 From f52a4c74efbb61195490535e9d65d964c4ebfee3 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 14 Jun 2016 00:26:49 +0000 Subject: ata: fix return value check in ahci_seattle_get_port_info() In case of error, the function devm_kzalloc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun Acked-by: Brijesh Singh Signed-off-by: Tejun Heo --- drivers/ata/ahci_seattle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/ahci_seattle.c b/drivers/ata/ahci_seattle.c index 6e702ab57220..1d31c0c0fc20 100644 --- a/drivers/ata/ahci_seattle.c +++ b/drivers/ata/ahci_seattle.c @@ -137,7 +137,7 @@ static const struct ata_port_info *ahci_seattle_get_port_info( u32 val; plat_data = devm_kzalloc(dev, sizeof(*plat_data), GFP_KERNEL); - if (IS_ERR(plat_data)) + if (!plat_data) return &ahci_port_info; plat_data->sgpio_ctrl = devm_ioremap_resource(dev, -- cgit v1.2.3 From 0c5ddb51e8f7be7170600f95a4ea92e5a32afad8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 13 Jun 2016 07:50:25 -0700 Subject: net/mlx4_en: initialize cmd.context_lock spinlock earlier MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Maciej Żenczykowski reported lockdep warning a spinlock was not registered before being held in mlx4_cmd_wake_completions() cmd.context_lock initialization is not at the right place. 1) mlx4_cmd_use_events() can be called multiple times. Calling spin_lock_init() on a live spinlock can lead to hangs. 2) mlx4_cmd_wake_completions() can be called while lock has not been initialized. Lockdep complains, and current logic is not race prone. It seems better to move the initialization earlier in mlx4_load_one() Signed-off-by: Eric Dumazet Reported-by: Maciej Żenczykowski Cc: Eugenia Emantayev Cc: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/cmd.c | 1 - drivers/net/ethernet/mellanox/mlx4/main.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index e94ca1c3fc7c..f04a423ff79d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -2597,7 +2597,6 @@ int mlx4_cmd_use_events(struct mlx4_dev *dev) priv->cmd.free_head = 0; sema_init(&priv->cmd.event_sem, priv->cmd.max_cmds); - spin_lock_init(&priv->cmd.context_lock); for (priv->cmd.token_mask = 1; priv->cmd.token_mask < priv->cmd.max_cmds; diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 12c77a70abdb..372ebfa880f5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -3222,6 +3222,7 @@ static int mlx4_load_one(struct pci_dev *pdev, int pci_dev_data, INIT_LIST_HEAD(&priv->pgdir_list); mutex_init(&priv->pgdir_mutex); + spin_lock_init(&priv->cmd.context_lock); INIT_LIST_HEAD(&priv->bf_list); mutex_init(&priv->bf_mutex); -- cgit v1.2.3 From b196c22af5c3ff784c472c80f6fb4e5fad67b2ac Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Tue, 14 Jun 2016 15:25:14 +0200 Subject: macsec: add rcu_barrier() on module exit Without this, the various uses of call_rcu could cause a kernel panic. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- drivers/net/macsec.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 47ee2c840b55..e80736f6acd7 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -3361,6 +3361,7 @@ static void __exit macsec_exit(void) genl_unregister_family(&macsec_fam); rtnl_link_unregister(&macsec_link_ops); unregister_netdevice_notifier(&macsec_notifier); + rcu_barrier(); } module_init(macsec_init); -- cgit v1.2.3 From 5d9649b3a524df9ccd15ac25ad6591089260fdbd Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Tue, 14 Jun 2016 15:25:15 +0200 Subject: macsec: allocate sg and iv on the heap For the crypto callbacks to work properly, we cannot have sg and iv on the stack. Use kmalloc instead, with a single allocation for aead_request + scatterlist + iv. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- drivers/net/macsec.c | 46 +++++++++++++++++++++++++++++++++++++--------- 1 file changed, 37 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index e80736f6acd7..189ea3e8e8a0 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -605,12 +605,41 @@ static void macsec_encrypt_done(struct crypto_async_request *base, int err) dev_put(dev); } +static struct aead_request *macsec_alloc_req(struct crypto_aead *tfm, + unsigned char **iv, + struct scatterlist **sg) +{ + size_t size, iv_offset, sg_offset; + struct aead_request *req; + void *tmp; + + size = sizeof(struct aead_request) + crypto_aead_reqsize(tfm); + iv_offset = size; + size += GCM_AES_IV_LEN; + + size = ALIGN(size, __alignof__(struct scatterlist)); + sg_offset = size; + size += sizeof(struct scatterlist) * (MAX_SKB_FRAGS + 1); + + tmp = kmalloc(size, GFP_ATOMIC); + if (!tmp) + return NULL; + + *iv = (unsigned char *)(tmp + iv_offset); + *sg = (struct scatterlist *)(tmp + sg_offset); + req = tmp; + + aead_request_set_tfm(req, tfm); + + return req; +} + static struct sk_buff *macsec_encrypt(struct sk_buff *skb, struct net_device *dev) { int ret; - struct scatterlist sg[MAX_SKB_FRAGS + 1]; - unsigned char iv[GCM_AES_IV_LEN]; + struct scatterlist *sg; + unsigned char *iv; struct ethhdr *eth; struct macsec_eth_header *hh; size_t unprotected_len; @@ -668,8 +697,6 @@ static struct sk_buff *macsec_encrypt(struct sk_buff *skb, macsec_fill_sectag(hh, secy, pn); macsec_set_shortlen(hh, unprotected_len - 2 * ETH_ALEN); - macsec_fill_iv(iv, secy->sci, pn); - skb_put(skb, secy->icv_len); if (skb->len - ETH_HLEN > macsec_priv(dev)->real_dev->mtu) { @@ -684,13 +711,15 @@ static struct sk_buff *macsec_encrypt(struct sk_buff *skb, return ERR_PTR(-EINVAL); } - req = aead_request_alloc(tx_sa->key.tfm, GFP_ATOMIC); + req = macsec_alloc_req(tx_sa->key.tfm, &iv, &sg); if (!req) { macsec_txsa_put(tx_sa); kfree_skb(skb); return ERR_PTR(-ENOMEM); } + macsec_fill_iv(iv, secy->sci, pn); + sg_init_table(sg, MAX_SKB_FRAGS + 1); skb_to_sgvec(skb, sg, 0, skb->len); @@ -861,7 +890,6 @@ static void macsec_decrypt_done(struct crypto_async_request *base, int err) out: macsec_rxsa_put(rx_sa); dev_put(dev); - return; } static struct sk_buff *macsec_decrypt(struct sk_buff *skb, @@ -871,8 +899,8 @@ static struct sk_buff *macsec_decrypt(struct sk_buff *skb, struct macsec_secy *secy) { int ret; - struct scatterlist sg[MAX_SKB_FRAGS + 1]; - unsigned char iv[GCM_AES_IV_LEN]; + struct scatterlist *sg; + unsigned char *iv; struct aead_request *req; struct macsec_eth_header *hdr; u16 icv_len = secy->icv_len; @@ -882,7 +910,7 @@ static struct sk_buff *macsec_decrypt(struct sk_buff *skb, if (!skb) return ERR_PTR(-ENOMEM); - req = aead_request_alloc(rx_sa->key.tfm, GFP_ATOMIC); + req = macsec_alloc_req(rx_sa->key.tfm, &iv, &sg); if (!req) { kfree_skb(skb); return ERR_PTR(-ENOMEM); -- cgit v1.2.3 From 6052f7fbce857e327218a9d8a040e210ea7cc718 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Tue, 14 Jun 2016 15:25:16 +0200 Subject: macsec: fix SA initialization The ASYNC flag prevents initialization on some physical machines. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller --- drivers/net/macsec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 189ea3e8e8a0..0e7eff7f1cd2 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -1262,7 +1262,7 @@ static struct crypto_aead *macsec_alloc_tfm(char *key, int key_len, int icv_len) struct crypto_aead *tfm; int ret; - tfm = crypto_alloc_aead("gcm(aes)", 0, CRYPTO_ALG_ASYNC); + tfm = crypto_alloc_aead("gcm(aes)", 0, 0); if (!tfm || IS_ERR(tfm)) return NULL; -- cgit v1.2.3 From 4a1836701fd59476ee1331379e00a9ab51ba4f61 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Jun 2016 17:45:51 +0200 Subject: net: skfb: remove obsolete -I cflag The skfp driver has been moved to drivers/net/fddi/skfp a long time ago, but we still attempt to include headers from the old location, which causes a warning when building with W=1: cc1: error: /git/arm-soc/drivers/net/skfp: No such file or directory [-Werror=missing-include-dirs] cc1: error: drivers/net/skfp: No such file or directory [-Werror=missing-include-dirs] Clearly this include directive is not needed any more, so we can just remove it now. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/fddi/skfp/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/fddi/skfp/Makefile b/drivers/net/fddi/skfp/Makefile index b0be0234abf6..a957a1c7e5ba 100644 --- a/drivers/net/fddi/skfp/Makefile +++ b/drivers/net/fddi/skfp/Makefile @@ -17,4 +17,4 @@ skfp-objs := skfddi.o hwmtm.o fplustm.o smt.o cfm.o \ # projects. To keep the source common for all those drivers (and # thus simplify fixes to it), please do not clean it up! -ccflags-y := -Idrivers/net/skfp -DPCI -DMEM_MAPPED_IO -Wno-strict-prototypes +ccflags-y := -DPCI -DMEM_MAPPED_IO -Wno-strict-prototypes -- cgit v1.2.3 From 4e384ac19b5be6ad084b215d298b82b3a91ad24b Mon Sep 17 00:00:00 2001 From: hayeswang Date: Thu, 16 Jun 2016 10:55:17 +0800 Subject: r8152: disable MAC clock speed down Disable MAC clock speed down. It may casue the first control transfer to contain the wrong data, when the power state change from U1 to U0. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 3f9f6ed3eec4..89dc752f92bd 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3382,15 +3382,11 @@ static void r8153_init(struct r8152 *tp) r8153_power_cut_en(tp, false); r8153_u1u2en(tp, true); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ALDPS_SPDWN_RATIO); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, EEE_SPDWN_RATIO); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, - PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN | - U1U2_SPDWN_EN | L1_SPDWN_EN); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, - PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN | TX10MIDLE_EN | - TP100_SPDWN_EN | TP500_SPDWN_EN | TP1000_SPDWN_EN | - EEE_SPDWN_EN); + /* MAC clock speed down */ + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0); r8153_enable_eee(tp); r8153_aldps_en(tp, true); -- cgit v1.2.3 From 93fe9b1838404fcc3bea320b704bfa461d8e57a6 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Thu, 16 Jun 2016 10:55:18 +0800 Subject: r8152: reset the bmu Reset the BMU to clear the rx/tx fifo. This avoids that the unexpected data remains in the hw. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 89dc752f92bd..f5bc351e09ef 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -116,6 +116,7 @@ #define USB_TX_DMA 0xd434 #define USB_TOLERANCE 0xd490 #define USB_LPM_CTRL 0xd41a +#define USB_BMU_RESET 0xd4b0 #define USB_UPS_CTRL 0xd800 #define USB_MISC_0 0xd81a #define USB_POWER_CUT 0xd80a @@ -338,6 +339,10 @@ #define TEST_MODE_DISABLE 0x00000001 #define TX_SIZE_ADJUST1 0x00000100 +/* USB_BMU_RESET */ +#define BMU_RESET_EP_IN 0x01 +#define BMU_RESET_EP_OUT 0x02 + /* USB_UPS_CTRL */ #define POWER_CUT 0x0100 @@ -2456,6 +2461,17 @@ static void r8153_teredo_off(struct r8152 *tp) ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0); } +static void rtl_reset_bmu(struct r8152 *tp) +{ + u32 ocp_data; + + ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_RESET); + ocp_data &= ~(BMU_RESET_EP_IN | BMU_RESET_EP_OUT); + ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data); + ocp_data |= BMU_RESET_EP_IN | BMU_RESET_EP_OUT; + ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data); +} + static void r8152_aldps_en(struct r8152 *tp, bool enable) { if (enable) { @@ -2681,6 +2697,7 @@ static void r8153_first_init(struct r8152 *tp) r8153_hw_phy_cfg(tp); rtl8152_nic_reset(tp); + rtl_reset_bmu(tp); ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); ocp_data &= ~NOW_IS_OOB; @@ -2742,6 +2759,7 @@ static void r8153_enter_oob(struct r8152 *tp) ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); rtl_disable(tp); + rtl_reset_bmu(tp); for (i = 0; i < 1000; i++) { ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); @@ -2803,6 +2821,7 @@ static void rtl8153_disable(struct r8152 *tp) { r8153_aldps_en(tp, false); rtl_disable(tp); + rtl_reset_bmu(tp); r8153_aldps_en(tp, true); usb_enable_lpm(tp->udev); } -- cgit v1.2.3 From a59e6d815226b70780427648e359da9bbee07171 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Thu, 16 Jun 2016 10:55:19 +0800 Subject: r8152: correct the rx early size The rx early size should be (agg_buf_sz - packet size) / 8 Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index f5bc351e09ef..4e257b8d8f3e 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -31,7 +31,7 @@ #define NETNEXT_VERSION "08" /* Information for net */ -#define NET_VERSION "3" +#define NET_VERSION "4" #define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION #define DRIVER_AUTHOR "Realtek linux nic maintainers " @@ -2174,7 +2174,7 @@ static void r8153_set_rx_early_timeout(struct r8152 *tp) static void r8153_set_rx_early_size(struct r8152 *tp) { u32 mtu = tp->netdev->mtu; - u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 4; + u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 8; ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data); } -- cgit v1.2.3 From 362761299eea7dfc3a4870551de36e08758b9254 Mon Sep 17 00:00:00 2001 From: Marcin Niestroj Date: Tue, 14 Jun 2016 15:29:24 +0200 Subject: power_supply: tps65217-charger: Fix NULL deref during property export This bug leads to: [ 1.906411] Unable to handle kernel NULL pointer dereference at virtual address 0000000c [ 1.914878] pgd = c0004000 [ 1.917786] [0000000c] *pgd=00000000 [ 1.921536] Internal error: Oops: 5 [#1] SMP ARM [ 1.926357] Modules linked in: [ 1.929556] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.4.5 #18 [ 1.936006] Hardware name: Generic AM33XX (Flattened Device Tree) [ 1.942383] Workqueue: events power_supply_changed_work [ 1.947842] task: de2c41c0 ti: de2c8000 task.ti: de2c8000 [ 1.953483] PC is at tps65217_ac_get_property+0x14/0x28 [ 1.958937] LR is at tps65217_ac_get_property+0x10/0x28 Driver was trying to use drv_data in property get handler. However drv_data was not set, so it caused NULL pointer dereference. This patch properly sets drv_data during probe by power_supply_config parameter, so the property get handler works as desired. Signed-off-by: Marcin Niestroj Fixes: 3636859b280c ("power_supply: Add support for tps65217-charger") Signed-off-by: Sebastian Reichel --- drivers/power/tps65217_charger.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/power/tps65217_charger.c b/drivers/power/tps65217_charger.c index d9f56730c735..73dfae41def8 100644 --- a/drivers/power/tps65217_charger.c +++ b/drivers/power/tps65217_charger.c @@ -197,6 +197,7 @@ static int tps65217_charger_probe(struct platform_device *pdev) { struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent); struct tps65217_charger *charger; + struct power_supply_config cfg = {}; int ret; dev_dbg(&pdev->dev, "%s\n", __func__); @@ -208,9 +209,12 @@ static int tps65217_charger_probe(struct platform_device *pdev) charger->tps = tps; charger->dev = &pdev->dev; + cfg.of_node = pdev->dev.of_node; + cfg.drv_data = charger; + charger->ac = devm_power_supply_register(&pdev->dev, &tps65217_charger_desc, - NULL); + &cfg); if (IS_ERR(charger->ac)) { dev_err(&pdev->dev, "failed: power supply register\n"); return PTR_ERR(charger->ac); -- cgit v1.2.3 From c70410cb91de70707a507ee7beef7021a5a89f0d Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 9 Jun 2016 14:38:50 -0400 Subject: rtl8xxxu: fix typo on variable name, compare against correct variable path_b_ok is being assigned but immediately after path_a_ok is being compared to the value 0x03. This appears to be a typo on the variable name, compare path_b_ok instead. Signed-off-by: Colin Ian King Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c index fe19ace0d6a0..b04cf30f3959 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c @@ -1149,7 +1149,7 @@ static void rtl8192eu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, for (i = 0; i < retry; i++) { path_b_ok = rtl8192eu_rx_iqk_path_b(priv); - if (path_a_ok == 0x03) { + if (path_b_ok == 0x03) { val32 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2); result[t][6] = (val32 >> 16) & 0x3ff; -- cgit v1.2.3 From 17471c7ba5115ed724d624577b21c166d2194272 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Jun 2016 22:31:10 +0200 Subject: net: sfc: avoid -Wtype-limits warning When building with -Wextra, we get a harmless warning from the EFX_EXTRACT_OWORD32 macro: ethernet/sfc/farch.c: In function 'efx_farch_test_registers': ethernet/sfc/farch.c:119:30: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] ethernet/sfc/farch.c:124:144: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] ethernet/sfc/farch.c:124:392: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] ethernet/sfc/farch.c:124:731: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] The macro and the caller are both correct, but we can avoid the warning by changing the index variable to a signed type. Signed-off-by: Arnd Bergmann Acked-by: Bert Kenward Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/farch.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/farch.c b/drivers/net/ethernet/sfc/farch.c index 133e9e35be9e..4c83739d158f 100644 --- a/drivers/net/ethernet/sfc/farch.c +++ b/drivers/net/ethernet/sfc/farch.c @@ -104,7 +104,8 @@ int efx_farch_test_registers(struct efx_nic *efx, const struct efx_farch_register_test *regs, size_t n_regs) { - unsigned address = 0, i, j; + unsigned address = 0; + int i, j; efx_oword_t mask, imask, original, reg, buf; for (i = 0; i < n_regs; ++i) { -- cgit v1.2.3 From a547224dceed4645139f7eff72ff51adb9938bcb Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 15 Jun 2016 14:42:11 -0700 Subject: mlx4e: Do not attempt to offload VXLAN ports that are unrecognized The mlx4e driver does not support more than one port for VXLAN offload. As such expecting the hardware to offload other ports is invalid since it appears the parsing logic is used to perform Tx checksum and segmentation offloads. Use the vxlan_port number to determine in which cases we can apply the offload and in which cases we can not. Signed-off-by: Alexander Duyck Reviewed-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 19ceced6736c..a2c25365a8a3 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2447,9 +2447,14 @@ static netdev_features_t mlx4_en_features_check(struct sk_buff *skb, * strip that feature if this is an IPv6 encapsulated frame. */ if (skb->encapsulation && - (skb->ip_summed == CHECKSUM_PARTIAL) && - (ip_hdr(skb)->version != 4)) - features &= ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK); + (skb->ip_summed == CHECKSUM_PARTIAL)) { + struct mlx4_en_priv *priv = netdev_priv(dev); + + if (!priv->vxlan_port || + (ip_hdr(skb)->version != 4) || + (udp_hdr(skb)->dest != priv->vxlan_port)) + features &= ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK); + } return features; } -- cgit v1.2.3 From ce449ba77a2271dce9771fb1f3eb37e4be6a8b81 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Thu, 16 Jun 2016 14:42:50 +0100 Subject: nfp: use correct index to mask link state irq We were using an incorrect define to get the irq vector number. NFP_NET_CFG_LSC is a control BAR offset, LSC interrupt vector index is called NFP_NET_IRQ_LSC_IDX. For machines with less than 30 CPUs this meant that we were disabling/enabling IRQ 0. For bigger hosts we were just playing with the 31st RX/TX interrupt. Fixes: 0ba40af963f0 ("nfp: move link state interrupt request/free calls") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfp_net_common.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index fa47c14c743a..ba26bb356b8d 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -2015,7 +2015,7 @@ static void nfp_net_open_stack(struct nfp_net *nn) netif_tx_wake_all_queues(nn->netdev); - enable_irq(nn->irq_entries[NFP_NET_CFG_LSC].vector); + enable_irq(nn->irq_entries[NFP_NET_IRQ_LSC_IDX].vector); nfp_net_read_link_status(nn); } @@ -2044,7 +2044,7 @@ static int nfp_net_netdev_open(struct net_device *netdev) NFP_NET_IRQ_LSC_IDX, nn->lsc_handler); if (err) goto err_free_exn; - disable_irq(nn->irq_entries[NFP_NET_CFG_LSC].vector); + disable_irq(nn->irq_entries[NFP_NET_IRQ_LSC_IDX].vector); nn->rx_rings = kcalloc(nn->num_rx_rings, sizeof(*nn->rx_rings), GFP_KERNEL); @@ -2133,7 +2133,7 @@ static void nfp_net_close_stack(struct nfp_net *nn) { unsigned int r; - disable_irq(nn->irq_entries[NFP_NET_CFG_LSC].vector); + disable_irq(nn->irq_entries[NFP_NET_IRQ_LSC_IDX].vector); netif_carrier_off(nn->netdev); nn->link_up = false; -- cgit v1.2.3 From 8a092e682f20f193f2070dba2ea1904e95814126 Mon Sep 17 00:00:00 2001 From: Mika Båtsman Date: Fri, 17 Jun 2016 13:31:37 +0300 Subject: regulator: anatop: allow regulator to be in bypass mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bypass support was added in commit d38018f2019c ("regulator: anatop: Add bypass support to digital LDOs"). A check for valid voltage selectors was added in commit da0607c8df5c ("regulator: anatop: Fail on invalid voltage selector") but it also discards all regulators that are in bypass mode. Add check for the bypass setting. Errors below were seen on a Variscite mx6 board. anatop_regulator 20c8000.anatop:regulator-vddcore@140: Failed to read a valid default voltage selector. anatop_regulator: probe of 20c8000.anatop:regulator-vddcore@140 failed with error -22 anatop_regulator 20c8000.anatop:regulator-vddsoc@140: Failed to read a valid default voltage selector. anatop_regulator: probe of 20c8000.anatop:regulator-vddsoc@140 failed with error -22 Fixes: da0607c8df5c ("regulator: anatop: Fail on invalid voltage selector") Signed-off-by: Mika Båtsman Signed-off-by: Mark Brown --- drivers/regulator/anatop-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 63cd5e68c864..3a6d0290c54c 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -296,7 +296,7 @@ static int anatop_regulator_probe(struct platform_device *pdev) if (!sreg->sel && !strcmp(sreg->name, "vddpu")) sreg->sel = 22; - if (!sreg->sel) { + if (!sreg->bypass && !sreg->sel) { dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n"); return -EINVAL; } -- cgit v1.2.3 From 6762925df4642aec5629f7971ba477d6930f53f7 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 31 May 2016 21:47:17 +0900 Subject: phy: rcar-gen3-usb2: fix unexpected repeat interrupts of VBUS change This patch fixes an issue that the driver is possible to cause unexpected repeat interrupts if a board condition is wrong (e.g. even if the ID pin is as function, a board supplies the VBUS.) The reason why unexpected repeat interrupts happen is: 1) The driver changed the mode to function if it detected the ID pin is high and the VBUS is high. 2) After the driver changed function mode, it disabled the "VBUS control" feature. Then, the VBUS signal will be low. 3) Since the VBUS change interruption happened, the driver checked the ID pin and VBUS. 4) Since VBUS was low, the driver changed the mode to host and enabled the "VBUS control" feature. Then the VBUS signal will be high. 5) Since the VBUS change interruption happened, the driver did 1) above. So, this patch modified the condition in rcar_gen3_device_recognition() to check the ID pin only. Fixes: 1114e2d (phy: rcar-gen3-usb2: change the mode to OTG on the combined channel) Cc: # v4.5+ Reported-by: Simon Horman Signed-off-by: Yoshihiro Shimoda Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-rcar-gen3-usb2.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c index 76bb88f0700a..4be3f5dbbc9f 100644 --- a/drivers/phy/phy-rcar-gen3-usb2.c +++ b/drivers/phy/phy-rcar-gen3-usb2.c @@ -144,12 +144,6 @@ static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch) extcon_set_cable_state_(ch->extcon, EXTCON_USB, true); } -static bool rcar_gen3_check_vbus(struct rcar_gen3_chan *ch) -{ - return !!(readl(ch->base + USB2_ADPCTRL) & - USB2_ADPCTRL_OTGSESSVLD); -} - static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch) { return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG); @@ -157,13 +151,7 @@ static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch) static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch) { - bool is_host = true; - - /* B-device? */ - if (rcar_gen3_check_id(ch) && rcar_gen3_check_vbus(ch)) - is_host = false; - - if (is_host) + if (!rcar_gen3_check_id(ch)) rcar_gen3_init_for_host(ch); else rcar_gen3_init_for_peri(ch); -- cgit v1.2.3 From 075adb8046532d9642f411a92b4f385d04ced24d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 13 Jun 2016 23:31:47 +0000 Subject: phy: rockchip-dp: fix return value check in rockchip_dp_phy_probe() In case of error, the function devm_kzalloc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun Reviewed-by: Heiko Stuebner Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-rockchip-dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c index 793ecb6d87bc..8b267a746576 100644 --- a/drivers/phy/phy-rockchip-dp.c +++ b/drivers/phy/phy-rockchip-dp.c @@ -90,7 +90,7 @@ static int rockchip_dp_phy_probe(struct platform_device *pdev) return -ENODEV; dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL); - if (IS_ERR(dp)) + if (!dp) return -ENOMEM; dp->dev = dev; -- cgit v1.2.3 From 5cf700ac9d50353dc5b8194a57c6f40bf1fc4424 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Mon, 13 Jun 2016 13:45:48 +0200 Subject: phy: phy-sun4i-usb: Fix optional gpios failing probe The interrupt 0 is not a valid interrupt number. In the event where the retrieval of the vbus-det gpio would return null, the gpiod_to_irq callback would return 0, while the current code makes the assumption that it is a valid interrupt, and would go on calling request_irq. Obviously, this would fail, preventing the driver from probing properly, while the vbus and id gpios are optional. Signed-off-by: Quentin Schulz Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-sun4i-usb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index bae54f7a1f48..45f01d6c9ed2 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -645,11 +645,11 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) data->id_det_irq = gpiod_to_irq(data->id_det_gpio); data->vbus_det_irq = gpiod_to_irq(data->vbus_det_gpio); - if ((data->id_det_gpio && data->id_det_irq < 0) || - (data->vbus_det_gpio && data->vbus_det_irq < 0)) + if ((data->id_det_gpio && data->id_det_irq <= 0) || + (data->vbus_det_gpio && data->vbus_det_irq <= 0)) data->phy0_poll = true; - if (data->id_det_irq >= 0) { + if (data->id_det_irq > 0) { ret = devm_request_irq(dev, data->id_det_irq, sun4i_usb_phy0_id_vbus_det_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, @@ -660,7 +660,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) } } - if (data->vbus_det_irq >= 0) { + if (data->vbus_det_irq > 0) { ret = devm_request_irq(dev, data->vbus_det_irq, sun4i_usb_phy0_id_vbus_det_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, -- cgit v1.2.3 From d99cb37828a2fe344ecc95d1fad570bbe447cc06 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 7 Jun 2016 18:14:56 +0100 Subject: phy-sun4i-usb: fix missing __iomem * Fix the missing __iomem attribute in sun4i_usb_phy_write() function. This fixes the following sparse warnings: drivers/phy/phy-sun4i-usb.c:178:39: warning: incorrect type in initializer (different address spaces) drivers/phy/phy-sun4i-usb.c:178:39: expected void *phyctl drivers/phy/phy-sun4i-usb.c:178:39: got void [noderef] * drivers/phy/phy-sun4i-usb.c:185:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:185:17: expected void volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:185:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:189:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:189:24: expected void const volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:189:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:196:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:196:17: expected void volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:196:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:199:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:199:24: expected void const volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:199:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:205:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:205:17: expected void volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:205:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:208:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:208:24: expected void const volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:208:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:210:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:210:17: expected void volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:210:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:212:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:212:24: expected void const volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:212:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:214:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:214:17: expected void volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:214:17: got void *phyctl Signed-off-by: Ben Dooks Acked-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-sun4i-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 45f01d6c9ed2..739029430dda 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -175,7 +175,7 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data, { struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy); u32 temp, usbc_bit = BIT(phy->index * 2); - void *phyctl = phy_data->base + phy_data->cfg->phyctl_offset; + void __iomem *phyctl = phy_data->base + phy_data->cfg->phyctl_offset; int i; mutex_lock(&phy_data->mutex); -- cgit v1.2.3 From 6c081ff6fd5abd621797570be43d5e3c6acfcd58 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 10 May 2016 11:01:33 +0300 Subject: phy: bcm-ns-usb2: checking the wrong variable We intended to test "usb2->phy" here instead of "dev". Fixes: d3feb4067335 ('phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar') Signed-off-by: Dan Carpenter Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-bcm-ns-usb2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/phy-bcm-ns-usb2.c b/drivers/phy/phy-bcm-ns-usb2.c index 95ab6b2a0de5..58dff80e9386 100644 --- a/drivers/phy/phy-bcm-ns-usb2.c +++ b/drivers/phy/phy-bcm-ns-usb2.c @@ -109,8 +109,8 @@ static int bcm_ns_usb2_probe(struct platform_device *pdev) } usb2->phy = devm_phy_create(dev, NULL, &ops); - if (IS_ERR(dev)) - return PTR_ERR(dev); + if (IS_ERR(usb2->phy)) + return PTR_ERR(usb2->phy); phy_set_drvdata(usb2->phy, usb2); platform_set_drvdata(pdev, usb2); -- cgit v1.2.3 From 79bb71bd1d93197ce227fa167b450b633f30a52b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 15 Jun 2016 22:57:38 +0200 Subject: gpio: make sure gpiod_to_irq() returns negative on NULL desc commit 54d77198fdfbc4f0fe11b4252c1d9c97d51a3264 ("gpio: bail out silently on NULL descriptors") doesn't work for gpiod_to_irq(): drivers assume that NULL descriptors will give negative IRQ numbers in return. It has been pointed out that returning 0 is NO_IRQ and that drivers should be amended to treat this as an error, but that is for the longer term: now let us repair the semantics. Cc: Maxime Ripard Reported-by: Hans de Goede Tested-by: Hans de Goede Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 58d822d7e8da..f39bf05993e7 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2056,7 +2056,14 @@ int gpiod_to_irq(const struct gpio_desc *desc) struct gpio_chip *chip; int offset; - VALIDATE_DESC(desc); + /* + * Cannot VALIDATE_DESC() here as gpiod_to_irq() consumer semantics + * requires this function to not return zero on an invalid descriptor + * but rather a negative error number. + */ + if (!desc || !desc->gdev || !desc->gdev->chip) + return -EINVAL; + chip = desc->gdev->chip; offset = gpio_chip_hwgpio(desc); if (chip->to_irq) { -- cgit v1.2.3 From bfbbe44daf64d0ccf2de123179817f3557fb9237 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 16 Jun 2016 11:55:55 +0200 Subject: gpio: make library immune to error pointers Most functions that take a GPIO descriptor in need to check the descriptor for IS_ERR(). We do this mostly in the VALIDATE_DESC() macro except for the gpiod_to_irq() function which needs special handling. Cc: stable@vger.kernel.org Reported-by: Grygorii Strashko Reviewed-by: Grygorii Strashko Acked-by: Alexandre Courbot Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index f39bf05993e7..570771ed19e6 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1373,8 +1373,12 @@ done: #define VALIDATE_DESC(desc) do { \ if (!desc) \ return 0; \ + if (IS_ERR(desc)) { \ + pr_warn("%s: invalid GPIO (errorpointer)\n", __func__); \ + return PTR_ERR(desc); \ + } \ if (!desc->gdev) { \ - pr_warn("%s: invalid GPIO\n", __func__); \ + pr_warn("%s: invalid GPIO (no device)\n", __func__); \ return -EINVAL; \ } \ if ( !desc->gdev->chip ) { \ @@ -1386,8 +1390,12 @@ done: #define VALIDATE_DESC_VOID(desc) do { \ if (!desc) \ return; \ + if (IS_ERR(desc)) { \ + pr_warn("%s: invalid GPIO (errorpointer)\n", __func__); \ + return; \ + } \ if (!desc->gdev) { \ - pr_warn("%s: invalid GPIO\n", __func__); \ + pr_warn("%s: invalid GPIO (no device)\n", __func__); \ return; \ } \ if (!desc->gdev->chip) { \ @@ -2061,7 +2069,7 @@ int gpiod_to_irq(const struct gpio_desc *desc) * requires this function to not return zero on an invalid descriptor * but rather a negative error number. */ - if (!desc || !desc->gdev || !desc->gdev->chip) + if (!desc || IS_ERR(desc) || !desc->gdev || !desc->gdev->chip) return -EINVAL; chip = desc->gdev->chip; -- cgit v1.2.3 From 76bf3441ad6584ddc3aea1501927f21b21ba3a3a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 7 Jun 2016 17:49:09 +0100 Subject: ata: sata_mv: fix mis-conversion in mv_write_cached_reg() Fix the signed issue in mv_write_cached_reg() where the laddr is assigned from a (long)addr instead of (unsigned long)addr. Fixes the following warnings: drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression Signed-off-by: Ben Dooks Signed-off-by: Tejun Heo --- drivers/ata/sata_mv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index bd74ee555278..745489a1c86a 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -986,7 +986,7 @@ static inline void mv_write_cached_reg(void __iomem *addr, u32 *old, u32 new) * Looks like a lot of fuss, but it avoids an unnecessary * +1 usec read-after-write delay for unaffected registers. */ - laddr = (long)addr & 0xffff; + laddr = (unsigned long)addr & 0xffff; if (laddr >= 0x300 && laddr <= 0x33c) { laddr &= 0x000f; if (laddr == 0x4 || laddr == 0xc) { -- cgit v1.2.3 From 041bf0225552044b85ce7ee7981e790d987d6ceb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 16 Jun 2016 11:30:23 +0300 Subject: drm/amdgpu: missing bounds check in amdgpu_set_pp_force_state() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is no limit on high "idx" can go. It should be less than ARRAY_SIZE(data.states) which is 16. The "data" variable wasn't declared in that scope so I shifted the code around a bit to make it work. Also I made "idx" unsigned. Fixes: f3898ea12fc1 ('drm/amd/powerplay: add some sysfs interfaces for powerplay.') Acked-by: Christian König Signed-off-by: Dan Carpenter Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c index 589b36e8c5cf..0e13d80d2a95 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c @@ -270,30 +270,28 @@ static ssize_t amdgpu_set_pp_force_state(struct device *dev, struct drm_device *ddev = dev_get_drvdata(dev); struct amdgpu_device *adev = ddev->dev_private; enum amd_pm_state_type state = 0; - long idx; + unsigned long idx; int ret; if (strlen(buf) == 1) adev->pp_force_state_enabled = false; - else { - ret = kstrtol(buf, 0, &idx); + else if (adev->pp_enabled) { + struct pp_states_info data; - if (ret) { + ret = kstrtoul(buf, 0, &idx); + if (ret || idx >= ARRAY_SIZE(data.states)) { count = -EINVAL; goto fail; } - if (adev->pp_enabled) { - struct pp_states_info data; - amdgpu_dpm_get_pp_num_states(adev, &data); - state = data.states[idx]; - /* only set user selected power states */ - if (state != POWER_STATE_TYPE_INTERNAL_BOOT && - state != POWER_STATE_TYPE_DEFAULT) { - amdgpu_dpm_dispatch_task(adev, - AMD_PP_EVENT_ENABLE_USER_STATE, &state, NULL); - adev->pp_force_state_enabled = true; - } + amdgpu_dpm_get_pp_num_states(adev, &data); + state = data.states[idx]; + /* only set user selected power states */ + if (state != POWER_STATE_TYPE_INTERNAL_BOOT && + state != POWER_STATE_TYPE_DEFAULT) { + amdgpu_dpm_dispatch_task(adev, + AMD_PP_EVENT_ENABLE_USER_STATE, &state, NULL); + adev->pp_force_state_enabled = true; } } fail: -- cgit v1.2.3 From 0b10029d826ed8c18a5f9d2f4abfa415d15cd1d3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 17 Jun 2016 10:17:17 -0400 Subject: drm/amdgpu: fix num_rbs exposed to userspace (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This was accidently broken for harvest cards when the code was refactored for Polaris support. v2: multiply by shader engines. Noticed by Nicolai. Reviewed-by: Nicolai Hähnle Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index 40a23704a981..d851ea15059f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -447,7 +447,8 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file dev_info.max_memory_clock = adev->pm.default_mclk * 10; } dev_info.enabled_rb_pipes_mask = adev->gfx.config.backend_enable_mask; - dev_info.num_rb_pipes = adev->gfx.config.num_rbs; + dev_info.num_rb_pipes = adev->gfx.config.max_backends_per_se * + adev->gfx.config.max_shader_engines; dev_info.num_hw_gfx_contexts = adev->gfx.config.max_hw_contexts; dev_info._pad = 0; dev_info.ids_flags = 0; -- cgit v1.2.3 From 8c5122e45a10a9262f872b53f151a592e870f905 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 8 Jun 2016 17:28:29 -0600 Subject: IB/mlx4: Properly initialize GRH TClass and FlowLabel in AHs When this code was reworked for IBoE support the order of assignments for the sl_tclass_flowlabel got flipped around resulting in TClass & FlowLabel being permanently set to 0 in the packet headers. This breaks IB routers that rely on these headers, but only affects kernel users - libmlx4 does this properly for user space. Cc: stable@vger.kernel.org Fixes: fa417f7b520e ("IB/mlx4: Add support for IBoE") Signed-off-by: Jason Gunthorpe Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/ah.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/ah.c b/drivers/infiniband/hw/mlx4/ah.c index 105246fba2e7..5fc623362731 100644 --- a/drivers/infiniband/hw/mlx4/ah.c +++ b/drivers/infiniband/hw/mlx4/ah.c @@ -47,6 +47,7 @@ static struct ib_ah *create_ib_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr, ah->av.ib.port_pd = cpu_to_be32(to_mpd(pd)->pdn | (ah_attr->port_num << 24)); ah->av.ib.g_slid = ah_attr->src_path_bits; + ah->av.ib.sl_tclass_flowlabel = cpu_to_be32(ah_attr->sl << 28); if (ah_attr->ah_flags & IB_AH_GRH) { ah->av.ib.g_slid |= 0x80; ah->av.ib.gid_index = ah_attr->grh.sgid_index; @@ -64,7 +65,6 @@ static struct ib_ah *create_ib_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr, !(1 << ah->av.ib.stat_rate & dev->caps.stat_rate_support)) --ah->av.ib.stat_rate; } - ah->av.ib.sl_tclass_flowlabel = cpu_to_be32(ah_attr->sl << 28); return &ah->ibah; } -- cgit v1.2.3 From 37e07cdafc111dfb7ce27e70e73d900d7cf2920c Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 10 Jun 2016 11:08:25 -0700 Subject: IB/cma: Make the code easier to verify Static source code analysis tools like smatch cannot handle functions that lock or not lock a mutex depending on the value of the arguments. Hence inline the function cma_disable_callback(). Additionally, this patch realizes a small performance optimization by reducing the number of mutex_lock() and mutex_unlock() calls in the modified functions. With this patch applied smatch no longer complains about source file cma.c. Without this patch smatch reports the following for this source file: drivers/infiniband/core/cma.c:1959: cma_req_handler() warn: inconsistent returns 'mutex:&listen_id->handler_mutex'. Locked on: line 1880 line 1959 Unlocked on: line 1941 drivers/infiniband/core/cma.c:2112: iw_conn_req_handler() warn: inconsistent returns 'mutex:&listen_id->handler_mutex'. Locked on: line 2048 Unlocked on: line 2112 Signed-off-by: Bart Van Assche Cc: Sean Hefty Cc: Steve Wise Cc: Leon Romanovsky Acked-by: Sean Hefty Reviewed-by: Steve Wise Reviewed-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/cma.c | 54 +++++++++++++++++++++---------------------- 1 file changed, 26 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index f0c91ba3178a..c58ee771baaa 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -708,17 +708,6 @@ static void cma_deref_id(struct rdma_id_private *id_priv) complete(&id_priv->comp); } -static int cma_disable_callback(struct rdma_id_private *id_priv, - enum rdma_cm_state state) -{ - mutex_lock(&id_priv->handler_mutex); - if (id_priv->state != state) { - mutex_unlock(&id_priv->handler_mutex); - return -EINVAL; - } - return 0; -} - struct rdma_cm_id *rdma_create_id(struct net *net, rdma_cm_event_handler event_handler, void *context, enum rdma_port_space ps, @@ -1671,11 +1660,12 @@ static int cma_ib_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) struct rdma_cm_event event; int ret = 0; + mutex_lock(&id_priv->handler_mutex); if ((ib_event->event != IB_CM_TIMEWAIT_EXIT && - cma_disable_callback(id_priv, RDMA_CM_CONNECT)) || + id_priv->state != RDMA_CM_CONNECT) || (ib_event->event == IB_CM_TIMEWAIT_EXIT && - cma_disable_callback(id_priv, RDMA_CM_DISCONNECT))) - return 0; + id_priv->state != RDMA_CM_DISCONNECT)) + goto out; memset(&event, 0, sizeof event); switch (ib_event->event) { @@ -1870,7 +1860,7 @@ static int cma_check_req_qp_type(struct rdma_cm_id *id, struct ib_cm_event *ib_e static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) { - struct rdma_id_private *listen_id, *conn_id; + struct rdma_id_private *listen_id, *conn_id = NULL; struct rdma_cm_event event; struct net_device *net_dev; int offset, ret; @@ -1884,9 +1874,10 @@ static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) goto net_dev_put; } - if (cma_disable_callback(listen_id, RDMA_CM_LISTEN)) { + mutex_lock(&listen_id->handler_mutex); + if (listen_id->state != RDMA_CM_LISTEN) { ret = -ECONNABORTED; - goto net_dev_put; + goto err1; } memset(&event, 0, sizeof event); @@ -1976,8 +1967,9 @@ static int cma_iw_handler(struct iw_cm_id *iw_id, struct iw_cm_event *iw_event) struct sockaddr *laddr = (struct sockaddr *)&iw_event->local_addr; struct sockaddr *raddr = (struct sockaddr *)&iw_event->remote_addr; - if (cma_disable_callback(id_priv, RDMA_CM_CONNECT)) - return 0; + mutex_lock(&id_priv->handler_mutex); + if (id_priv->state != RDMA_CM_CONNECT) + goto out; memset(&event, 0, sizeof event); switch (iw_event->event) { @@ -2029,6 +2021,7 @@ static int cma_iw_handler(struct iw_cm_id *iw_id, struct iw_cm_event *iw_event) return ret; } +out: mutex_unlock(&id_priv->handler_mutex); return ret; } @@ -2039,13 +2032,15 @@ static int iw_conn_req_handler(struct iw_cm_id *cm_id, struct rdma_cm_id *new_cm_id; struct rdma_id_private *listen_id, *conn_id; struct rdma_cm_event event; - int ret; + int ret = -ECONNABORTED; struct sockaddr *laddr = (struct sockaddr *)&iw_event->local_addr; struct sockaddr *raddr = (struct sockaddr *)&iw_event->remote_addr; listen_id = cm_id->context; - if (cma_disable_callback(listen_id, RDMA_CM_LISTEN)) - return -ECONNABORTED; + + mutex_lock(&listen_id->handler_mutex); + if (listen_id->state != RDMA_CM_LISTEN) + goto out; /* Create a new RDMA id for the new IW CM ID */ new_cm_id = rdma_create_id(listen_id->id.route.addr.dev_addr.net, @@ -3216,8 +3211,9 @@ static int cma_sidr_rep_handler(struct ib_cm_id *cm_id, struct ib_cm_sidr_rep_event_param *rep = &ib_event->param.sidr_rep_rcvd; int ret = 0; - if (cma_disable_callback(id_priv, RDMA_CM_CONNECT)) - return 0; + mutex_lock(&id_priv->handler_mutex); + if (id_priv->state != RDMA_CM_CONNECT) + goto out; memset(&event, 0, sizeof event); switch (ib_event->event) { @@ -3673,12 +3669,13 @@ static int cma_ib_mc_handler(int status, struct ib_sa_multicast *multicast) struct rdma_id_private *id_priv; struct cma_multicast *mc = multicast->context; struct rdma_cm_event event; - int ret; + int ret = 0; id_priv = mc->id_priv; - if (cma_disable_callback(id_priv, RDMA_CM_ADDR_BOUND) && - cma_disable_callback(id_priv, RDMA_CM_ADDR_RESOLVED)) - return 0; + mutex_lock(&id_priv->handler_mutex); + if (id_priv->state != RDMA_CM_ADDR_BOUND && + id_priv->state != RDMA_CM_ADDR_RESOLVED) + goto out; if (!status) status = cma_set_qkey(id_priv, be32_to_cpu(multicast->rec.qkey)); @@ -3720,6 +3717,7 @@ static int cma_ib_mc_handler(int status, struct ib_sa_multicast *multicast) return 0; } +out: mutex_unlock(&id_priv->handler_mutex); return 0; } -- cgit v1.2.3 From b4ba6633ea153266429f16614029ab1578815390 Mon Sep 17 00:00:00 2001 From: Jubin John Date: Thu, 9 Jun 2016 07:51:08 -0700 Subject: IB/hfi1: Fix credit return threshold adjustment The credit return threshold adjustment on mtu change algorithm does not take into account all the kernel send contexts that are assigned per VL. Use the pio send context map to adjust the credit return thresholds for all the allocated and assigned kernel send contexts based on the MTU adjustment per VL. The pio send context map can be changed dynamically based on the actual number of operational vls which is set by the fabric manager. When this happens update the credit return threshold values for all the remapped kernel send contexts. Reviewed-by: Dennis Dalessandro Reviewed-by: Mike Marciniszyn Reviewed-by: Jianxin Xiong Signed-off-by: Jubin John Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 7 +++++-- drivers/infiniband/hw/hfi1/pio.c | 24 ++++++++++++++++++++++-- 2 files changed, 27 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index 81619fbb5842..c533d4422399 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -9777,7 +9777,7 @@ static void set_send_length(struct hfi1_pportdata *ppd) u64 len1 = 0, len2 = (((dd->vld[15].mtu + max_hb) >> 2) & SEND_LEN_CHECK1_LEN_VL15_MASK) << SEND_LEN_CHECK1_LEN_VL15_SHIFT; - int i; + int i, j; u32 thres; for (i = 0; i < ppd->vls_supported; i++) { @@ -9801,7 +9801,10 @@ static void set_send_length(struct hfi1_pportdata *ppd) sc_mtu_to_threshold(dd->vld[i].sc, dd->vld[i].mtu, dd->rcd[0]->rcvhdrqentsize)); - sc_set_cr_threshold(dd->vld[i].sc, thres); + for (j = 0; j < INIT_SC_PER_VL; j++) + sc_set_cr_threshold( + pio_select_send_context_vl(dd, j, i), + thres); } thres = min(sc_percent_to_threshold(dd->vld[15].sc, 50), sc_mtu_to_threshold(dd->vld[15].sc, diff --git a/drivers/infiniband/hw/hfi1/pio.c b/drivers/infiniband/hw/hfi1/pio.c index d5edb1afbb8f..e0e1ff2a0c72 100644 --- a/drivers/infiniband/hw/hfi1/pio.c +++ b/drivers/infiniband/hw/hfi1/pio.c @@ -1797,6 +1797,21 @@ static void pio_map_rcu_callback(struct rcu_head *list) pio_map_free(m); } +/* + * Set credit return threshold for the kernel send context + */ +static void set_threshold(struct hfi1_devdata *dd, int scontext, int i) +{ + u32 thres; + + thres = min(sc_percent_to_threshold(dd->kernel_send_context[scontext], + 50), + sc_mtu_to_threshold(dd->kernel_send_context[scontext], + dd->vld[i].mtu, + dd->rcd[0]->rcvhdrqentsize)); + sc_set_cr_threshold(dd->kernel_send_context[scontext], thres); +} + /* * pio_map_init - called when #vls change * @dd: hfi1_devdata @@ -1872,11 +1887,16 @@ int pio_map_init(struct hfi1_devdata *dd, u8 port, u8 num_vls, u8 *vl_scontexts) if (!newmap->map[i]) goto bail; newmap->map[i]->mask = (1 << ilog2(sz)) - 1; - /* assign send contexts */ + /* + * assign send contexts and + * adjust credit return threshold + */ for (j = 0; j < sz; j++) { - if (dd->kernel_send_context[scontext]) + if (dd->kernel_send_context[scontext]) { newmap->map[i]->ksc[j] = dd->kernel_send_context[scontext]; + set_threshold(dd, scontext, i); + } if (++scontext >= first_scontext + vl_scontexts[i]) /* wrap back to first send context */ -- cgit v1.2.3 From 96605672a4172f6e31f31ce29ee27fef68011de0 Mon Sep 17 00:00:00 2001 From: Brian Welty Date: Thu, 9 Jun 2016 07:51:14 -0700 Subject: IB/rdmavt: Correct required callback functions for MODIFY_QP Functions required for MODIFY_PORT were incorrectly being required for MODIFY_QP. Reviewed-by: Dennis Dalessandro Signed-off-by: Brian Welty Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rdmavt/vt.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rdmavt/vt.c b/drivers/infiniband/sw/rdmavt/vt.c index e1cc2cc42f25..30c4fda7a05a 100644 --- a/drivers/infiniband/sw/rdmavt/vt.c +++ b/drivers/infiniband/sw/rdmavt/vt.c @@ -501,9 +501,7 @@ static noinline int check_support(struct rvt_dev_info *rdi, int verb) !rdi->driver_f.quiesce_qp || !rdi->driver_f.notify_error_qp || !rdi->driver_f.mtu_from_qp || - !rdi->driver_f.mtu_to_path_mtu || - !rdi->driver_f.shut_down_port || - !rdi->driver_f.cap_mask_chg) + !rdi->driver_f.mtu_to_path_mtu) return -EINVAL; break; -- cgit v1.2.3 From 501edc42446e89fa67fb6ef2c9afb50792c310c0 Mon Sep 17 00:00:00 2001 From: Brian Welty Date: Thu, 9 Jun 2016 07:51:20 -0700 Subject: IB/rdmavt: Correct warning during QPN allocation Correct calculation of the low order bits which should be unset based on use of qos_shift parameter when assigning QPN. Reviewed-by: Dennis Dalessandro Signed-off-by: Brian Welty Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rdmavt/qp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c index 7de5134bec85..c3e0d614f68b 100644 --- a/drivers/infiniband/sw/rdmavt/qp.c +++ b/drivers/infiniband/sw/rdmavt/qp.c @@ -369,8 +369,8 @@ static int alloc_qpn(struct rvt_dev_info *rdi, struct rvt_qpn_table *qpt, /* wrap to first map page, invert bit 0 */ offset = qpt->incr | ((offset & 1) ^ 1); } - /* there can be no bits at shift and below */ - WARN_ON(offset & (rdi->dparms.qos_shift - 1)); + /* there can be no set bits in low-order QoS bits */ + WARN_ON(offset & (BIT(rdi->dparms.qos_shift) - 1)); qpn = mk_qpn(qpt, map, offset); } -- cgit v1.2.3 From c3c64a951cbdb6096d02dcc339a9c807ce1e976a Mon Sep 17 00:00:00 2001 From: Jubin John Date: Thu, 9 Jun 2016 07:51:27 -0700 Subject: IB/hfi1: Increase packet egress timeout The current value of 500us for the packet egress timeout is too small which causes the host to declare failure on draining packets too early and unnecessarily bounces the link. Increase this to 50ms taking into account the switch packet discard timer default and the worst case per-VL package drainage rate. Reviewed-by: Dean Luick Signed-off-by: Jubin John Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/pio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/pio.c b/drivers/infiniband/hw/hfi1/pio.c index e0e1ff2a0c72..d4022450b73f 100644 --- a/drivers/infiniband/hw/hfi1/pio.c +++ b/drivers/infiniband/hw/hfi1/pio.c @@ -995,7 +995,7 @@ static void sc_wait_for_packet_egress(struct send_context *sc, int pause) /* counter is reset if occupancy count changes */ if (reg != reg_prev) loop = 0; - if (loop > 500) { + if (loop > 50000) { /* timed out - bounce the link */ dd_dev_err(dd, "%s: context %u(%u) timeout waiting for packets to egress, remaining count %u, bouncing link\n", -- cgit v1.2.3 From ca2f30a0a6786e6b08eeb8abb2bbb8df58709d6e Mon Sep 17 00:00:00 2001 From: Ira Weiny Date: Thu, 9 Jun 2016 07:51:33 -0700 Subject: IB/hfi1: Prevent context loss If a context has already been assigned to an FD, prevent another assignment. Reviewed-by: Dennis Dalessandro Signed-off-by: Ira Weiny Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/file_ops.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/file_ops.c b/drivers/infiniband/hw/hfi1/file_ops.c index 7a5b0e676cc7..c702a009608f 100644 --- a/drivers/infiniband/hw/hfi1/file_ops.c +++ b/drivers/infiniband/hw/hfi1/file_ops.c @@ -203,6 +203,9 @@ static long hfi1_file_ioctl(struct file *fp, unsigned int cmd, switch (cmd) { case HFI1_IOCTL_ASSIGN_CTXT: + if (uctxt) + return -EINVAL; + if (copy_from_user(&uinfo, (struct hfi1_user_info __user *)arg, sizeof(uinfo))) -- cgit v1.2.3 From 5e9ef24619486213223053678eb9175630ef6bf9 Mon Sep 17 00:00:00 2001 From: Ira Weiny Date: Thu, 9 Jun 2016 07:51:39 -0700 Subject: IB/qib: Prevent context loss If a context has already been assigned to an FD, prevent another assignment. Reviewed-by: Dennis Dalessandro Signed-off-by: Ira Weiny Signed-off-by: Doug Ledford --- drivers/infiniband/hw/qib/qib_file_ops.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c index ff946d5f59e4..382466a90da7 100644 --- a/drivers/infiniband/hw/qib/qib_file_ops.c +++ b/drivers/infiniband/hw/qib/qib_file_ops.c @@ -2178,6 +2178,11 @@ static ssize_t qib_write(struct file *fp, const char __user *data, switch (cmd.type) { case QIB_CMD_ASSIGN_CTXT: + if (rcd) { + ret = -EINVAL; + goto bail; + } + ret = qib_assign_ctxt(fp, &cmd.cmd.user_info); if (ret) goto bail; -- cgit v1.2.3 From 93dd0a097859a174817ea94ec55bfc29c5706454 Mon Sep 17 00:00:00 2001 From: Tadeusz Struk Date: Thu, 9 Jun 2016 07:51:45 -0700 Subject: IB/hfi1: Fix potential NULL ptr dereference This fixes potential NULL ptr dereference because IS_ERR(dd) doesn't handle NULL. Fix the issue by initializing the pointer with a not NULL error code. Reviewed-by: Dennis Dalessandro Signed-off-by: Tadeusz Struk Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c index 0d28a5a40fae..eed971ccd2a1 100644 --- a/drivers/infiniband/hw/hfi1/init.c +++ b/drivers/infiniband/hw/hfi1/init.c @@ -1383,7 +1383,7 @@ static void postinit_cleanup(struct hfi1_devdata *dd) static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int ret = 0, j, pidx, initfail; - struct hfi1_devdata *dd = NULL; + struct hfi1_devdata *dd = ERR_PTR(-EINVAL); struct hfi1_pportdata *ppd; /* First, lock the non-writable module parameters */ -- cgit v1.2.3 From c078f0dd01b73c70b92a660cb1ce3dfc3cbf2903 Mon Sep 17 00:00:00 2001 From: Tadeusz Struk Date: Thu, 9 Jun 2016 07:51:51 -0700 Subject: IB/hfi1: Fix potential buffer overflow This fixes potential buffer overflow because the sprintf function doesn't check buffer boundaries. Use snprintf instead. Reviewed-by: Dennis Dalessandro Signed-off-by: Tadeusz Struk Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/qsfp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/qsfp.c b/drivers/infiniband/hw/hfi1/qsfp.c index 2441669f0817..9fb561682c66 100644 --- a/drivers/infiniband/hw/hfi1/qsfp.c +++ b/drivers/infiniband/hw/hfi1/qsfp.c @@ -579,7 +579,8 @@ int qsfp_dump(struct hfi1_pportdata *ppd, char *buf, int len) if (ppd->qsfp_info.cache_valid) { if (QSFP_IS_CU(cache[QSFP_MOD_TECH_OFFS])) - sprintf(lenstr, "%dM ", cache[QSFP_MOD_LEN_OFFS]); + snprintf(lenstr, sizeof(lenstr), "%dM ", + cache[QSFP_MOD_LEN_OFFS]); power_byte = cache[QSFP_MOD_PWR_OFFS]; sofar += scnprintf(buf + sofar, len - sofar, "PWR:%.3sW\n", -- cgit v1.2.3 From 3ec5fa28c9ea54fb172859d2612a0be6526e4dc1 Mon Sep 17 00:00:00 2001 From: Sebastian Sanchez Date: Thu, 9 Jun 2016 07:51:57 -0700 Subject: IB/hfi1: Remove FULL_MGMT_P_KEY from pkey table at link up FULL_MGMT_P_KEY doesn't get cleared from the pkey table at link bounce because the link down and link bounce code paths are different when moving a QSFP cable on a switch. This causes an HFI unit connected to a switch to try to be initialized to an FM node when the QSFP cable is moved from a MgmtAllowed=NO port to a MgmtAllowed=YES port and back to a MgmtAllowed=NO port. Remove FULL_MGMT_P_KEY from pkey table at link up. Reviewed-by: Dean Luick Signed-off-by: Sebastian Sanchez Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index c533d4422399..3487fdfb2c63 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -1037,7 +1037,7 @@ static void dc_shutdown(struct hfi1_devdata *); static void dc_start(struct hfi1_devdata *); static int qos_rmt_entries(struct hfi1_devdata *dd, unsigned int *mp, unsigned int *np); -static void remove_full_mgmt_pkey(struct hfi1_pportdata *ppd); +static void clear_full_mgmt_pkey(struct hfi1_pportdata *ppd); /* * Error interrupt table entry. This is used as input to the interrupt @@ -6962,8 +6962,6 @@ void handle_link_down(struct work_struct *work) } reset_neighbor_info(ppd); - if (ppd->mgmt_allowed) - remove_full_mgmt_pkey(ppd); /* disable the port */ clear_rcvctrl(ppd->dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK); @@ -7072,10 +7070,12 @@ static void add_full_mgmt_pkey(struct hfi1_pportdata *ppd) (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); } -static void remove_full_mgmt_pkey(struct hfi1_pportdata *ppd) +static void clear_full_mgmt_pkey(struct hfi1_pportdata *ppd) { - ppd->pkeys[2] = 0; - (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); + if (ppd->pkeys[2] != 0) { + ppd->pkeys[2] = 0; + (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); + } } /* @@ -9168,6 +9168,13 @@ int start_link(struct hfi1_pportdata *ppd) return 0; } + /* + * FULL_MGMT_P_KEY is cleared from the pkey table, so that the + * pkey table can be configured properly if the HFI unit is connected + * to switch port with MgmtAllowed=NO + */ + clear_full_mgmt_pkey(ppd); + return set_link_state(ppd, HLS_DN_POLL); } -- cgit v1.2.3 From 34d351f8ddf6dee24d739c4b00a4404e48089a04 Mon Sep 17 00:00:00 2001 From: Sebastian Sanchez Date: Thu, 9 Jun 2016 07:52:03 -0700 Subject: IB/hfi1: Send a pkey change event on driver pkey update Swapping a cable from a "Mgmt Allowed=No" switch port to a "Mgmt Allowed=Yes" switch port doesn't send a pkey change notification. Therefore, the link doesn't become active as the oib_utils layer uses an old pkey table cache. Fix by ensuring the pkey change notification is sent when the table is changed both explicitly by the FM and implicitly by the driver via a cable swap. Reviewed-by: Mike Marciniszyn Signed-off-by: Sebastian Sanchez Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 2 ++ drivers/infiniband/hw/hfi1/mad.c | 19 ++++++++++++------- drivers/infiniband/hw/hfi1/mad.h | 2 ++ 3 files changed, 16 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index 3487fdfb2c63..f5de85178055 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -7068,6 +7068,7 @@ static void add_full_mgmt_pkey(struct hfi1_pportdata *ppd) __func__, ppd->pkeys[2], FULL_MGMT_P_KEY); ppd->pkeys[2] = FULL_MGMT_P_KEY; (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); + hfi1_event_pkey_change(ppd->dd, ppd->port); } static void clear_full_mgmt_pkey(struct hfi1_pportdata *ppd) @@ -7075,6 +7076,7 @@ static void clear_full_mgmt_pkey(struct hfi1_pportdata *ppd) if (ppd->pkeys[2] != 0) { ppd->pkeys[2] = 0; (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); + hfi1_event_pkey_change(ppd->dd, ppd->port); } } diff --git a/drivers/infiniband/hw/hfi1/mad.c b/drivers/infiniband/hw/hfi1/mad.c index 219029576ba0..fca07a1d6c28 100644 --- a/drivers/infiniband/hw/hfi1/mad.c +++ b/drivers/infiniband/hw/hfi1/mad.c @@ -78,6 +78,16 @@ static inline void clear_opa_smp_data(struct opa_smp *smp) memset(data, 0, size); } +void hfi1_event_pkey_change(struct hfi1_devdata *dd, u8 port) +{ + struct ib_event event; + + event.event = IB_EVENT_PKEY_CHANGE; + event.device = &dd->verbs_dev.rdi.ibdev; + event.element.port_num = port; + ib_dispatch_event(&event); +} + static void send_trap(struct hfi1_ibport *ibp, void *data, unsigned len) { struct ib_mad_send_buf *send_buf; @@ -1418,15 +1428,10 @@ static int set_pkeys(struct hfi1_devdata *dd, u8 port, u16 *pkeys) } if (changed) { - struct ib_event event; - (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); - - event.event = IB_EVENT_PKEY_CHANGE; - event.device = &dd->verbs_dev.rdi.ibdev; - event.element.port_num = port; - ib_dispatch_event(&event); + hfi1_event_pkey_change(dd, port); } + return 0; } diff --git a/drivers/infiniband/hw/hfi1/mad.h b/drivers/infiniband/hw/hfi1/mad.h index 55ee08675333..8b734aaae88a 100644 --- a/drivers/infiniband/hw/hfi1/mad.h +++ b/drivers/infiniband/hw/hfi1/mad.h @@ -434,4 +434,6 @@ struct sc2vlnt { COUNTER_MASK(1, 3) | \ COUNTER_MASK(1, 4)) +void hfi1_event_pkey_change(struct hfi1_devdata *dd, u8 port); + #endif /* _HFI1_MAD_H */ -- cgit v1.2.3 From 63dcdd35c1552ca0c911e98ba3389a0729a457f4 Mon Sep 17 00:00:00 2001 From: Nogah Frankel Date: Fri, 17 Jun 2016 15:09:05 +0200 Subject: mlxsw: spectrum: Don't count internal TX header bytes to stats Stop the SW TX counter from counting the TX header bytes since they are not being sent out. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Reviewed-by: Ido Schimmel Signed-off-by: Nogah Frankel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 6f9e3ddff4a8..660429ebfbe1 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -408,7 +408,11 @@ static netdev_tx_t mlxsw_sp_port_xmit(struct sk_buff *skb, } mlxsw_sp_txhdr_construct(skb, &tx_info); - len = skb->len; + /* TX header is consumed by HW on the way so we shouldn't count its + * bytes as being sent. + */ + len = skb->len - MLXSW_TXHDR_LEN; + /* Due to a race we might fail here because of a full queue. In that * unlikely case we simply drop the packet. */ -- cgit v1.2.3 From 4e239fac7c6b9d703e83c81b52ec9fec00c50129 Mon Sep 17 00:00:00 2001 From: Nogah Frankel Date: Fri, 17 Jun 2016 15:09:06 +0200 Subject: mlxsw: switchx2: Don't count internal TX header bytes to stats Stop the SW TX counter from counting the TX header bytes since they are not being sent out. Fixes: e577516b9db3 ("mlxsw: Fix use-after-free bug in mlxsw_sx_port_xmit") Signed-off-by: Nogah Frankel Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/switchx2.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/switchx2.c b/drivers/net/ethernet/mellanox/mlxsw/switchx2.c index 3842eab9449a..25f658b3849a 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/switchx2.c +++ b/drivers/net/ethernet/mellanox/mlxsw/switchx2.c @@ -316,7 +316,10 @@ static netdev_tx_t mlxsw_sx_port_xmit(struct sk_buff *skb, } } mlxsw_sx_txhdr_construct(skb, &tx_info); - len = skb->len; + /* TX header is consumed by HW on the way so we shouldn't count its + * bytes as being sent. + */ + len = skb->len - MLXSW_TXHDR_LEN; /* Due to a race we might fail here because of a full queue. In that * unlikely case we simply drop the packet. */ -- cgit v1.2.3 From a9836cbb5fc885d3b8f3b91b2d47525f7269dec1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 17 Jun 2016 18:15:30 +0200 Subject: net: tilegx: use correct timespec64 type The conversion to the 64-bit time based ptp methods left two instances of 'struct timespec' in place. This is harmless because 64-bit architectures define timespec64 as timespec, and this driver is not used on 32-bit machines. However, using 'struct timespec64' directly is obviously the right thing to do, and will help us remove 'struct timespec' in the future. Signed-off-by: Arnd Bergmann Fixes: b9acf24f779c ("ptp: tilegx: convert to the 64 bit get/set time methods.") Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/ethernet/tile/tilegx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c index 0a15acc075b3..11213a38c795 100644 --- a/drivers/net/ethernet/tile/tilegx.c +++ b/drivers/net/ethernet/tile/tilegx.c @@ -462,7 +462,7 @@ static void tile_tx_timestamp(struct sk_buff *skb, int instance) if (unlikely((shtx->tx_flags & SKBTX_HW_TSTAMP) != 0)) { struct mpipe_data *md = &mpipe_data[instance]; struct skb_shared_hwtstamps shhwtstamps; - struct timespec ts; + struct timespec64 ts; shtx->tx_flags |= SKBTX_IN_PROGRESS; gxio_mpipe_get_timestamp(&md->context, &ts); @@ -886,9 +886,9 @@ static struct ptp_clock_info ptp_mpipe_caps = { /* Sync mPIPE's timestamp up with Linux system time and register PTP clock. */ static void register_ptp_clock(struct net_device *dev, struct mpipe_data *md) { - struct timespec ts; + struct timespec64 ts; - getnstimeofday(&ts); + ktime_get_ts64(&ts); gxio_mpipe_set_timestamp(&md->context, &ts); mutex_init(&md->ptp_lock); -- cgit v1.2.3 From 053ea640818812313892ec4f370f5cfac42fd355 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Sat, 18 Jun 2016 00:54:44 +0200 Subject: hwmon: (dell-smm) Fail in ioctl I8K_BIOS_VERSION when bios version is not a number MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ABI of I8K_BIOS_VERSION ioctl can return only number. But new BIOS versions contain also other characters, which does not fit into that ABI. So in case of non digit values return -EINVAL. Reported-by: Mario Limonciello Signed-off-by: Pali Rohár Signed-off-by: Guenter Roeck --- drivers/hwmon/dell-smm-hwmon.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c index c43318d3416e..480b2fae9541 100644 --- a/drivers/hwmon/dell-smm-hwmon.c +++ b/drivers/hwmon/dell-smm-hwmon.c @@ -35,6 +35,7 @@ #include #include #include +#include #include @@ -387,6 +388,10 @@ i8k_ioctl_unlocked(struct file *fp, unsigned int cmd, unsigned long arg) switch (cmd) { case I8K_BIOS_VERSION: + if (!isdigit(bios_version[0]) || !isdigit(bios_version[1]) || + !isdigit(bios_version[2])) + return -EINVAL; + val = (bios_version[0] << 16) | (bios_version[1] << 8) | bios_version[2]; break; -- cgit v1.2.3 From 7613663cc186f8f3c50279390ddc60286758001c Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Sat, 18 Jun 2016 00:54:45 +0200 Subject: hwmon: (dell-smm) Restrict fan control and serial number to CAP_SYS_ADMIN by default MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For security reasons ordinary user must not be able to control fan speed via /proc/i8k by default. Some malicious software running under "nobody" user could be able to turn fan off and cause HW problems. So this patch changes default value of "restricted" parameter to 1. Also restrict reading of DMI_PRODUCT_SERIAL from /proc/i8k via "restricted" parameter. It is because non root user cannot read DMI_PRODUCT_SERIAL from sysfs file /sys/class/dmi/id/product_serial. Old non secure behaviour of file /proc/i8k can be achieved by loading this module with "restricted" parameter set to 0. Note that this patch has effects only for kernels compiled with CONFIG_I8K and only for file /proc/i8k. Hwmon interface provided by this driver was not changed and root access for setting fan speed was needed also before. Reported-by: Mario Limonciello Signed-off-by: Pali Rohár Cc: stable@vger.kernel.org # will need backport Signed-off-by: Guenter Roeck --- drivers/hwmon/dell-smm-hwmon.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c index 480b2fae9541..c8bd3fdd0710 100644 --- a/drivers/hwmon/dell-smm-hwmon.c +++ b/drivers/hwmon/dell-smm-hwmon.c @@ -67,6 +67,7 @@ static DEFINE_MUTEX(i8k_mutex); static char bios_version[4]; +static char bios_machineid[16]; static struct device *i8k_hwmon_dev; static u32 i8k_hwmon_flags; static uint i8k_fan_mult = I8K_FAN_MULT; @@ -95,13 +96,13 @@ module_param(ignore_dmi, bool, 0); MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match"); #if IS_ENABLED(CONFIG_I8K) -static bool restricted; +static bool restricted = true; module_param(restricted, bool, 0); -MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set"); +MODULE_PARM_DESC(restricted, "Restrict fan control and serial number to CAP_SYS_ADMIN (default: 1)"); static bool power_status; module_param(power_status, bool, 0600); -MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k"); +MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k (default: 0)"); #endif static uint fan_mult; @@ -397,9 +398,11 @@ i8k_ioctl_unlocked(struct file *fp, unsigned int cmd, unsigned long arg) break; case I8K_MACHINE_ID: - memset(buff, 0, 16); - strlcpy(buff, i8k_get_dmi_data(DMI_PRODUCT_SERIAL), - sizeof(buff)); + if (restricted && !capable(CAP_SYS_ADMIN)) + return -EPERM; + + memset(buff, 0, sizeof(buff)); + strlcpy(buff, bios_machineid, sizeof(buff)); break; case I8K_FN_STATUS: @@ -516,7 +519,7 @@ static int i8k_proc_show(struct seq_file *seq, void *offset) seq_printf(seq, "%s %s %s %d %d %d %d %d %d %d\n", I8K_PROC_FMT, bios_version, - i8k_get_dmi_data(DMI_PRODUCT_SERIAL), + (restricted && !capable(CAP_SYS_ADMIN)) ? "-1" : bios_machineid, cpu_temp, left_fan, right_fan, left_speed, right_speed, ac_power, fn_key); @@ -985,6 +988,8 @@ static int __init i8k_probe(void) strlcpy(bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION), sizeof(bios_version)); + strlcpy(bios_machineid, i8k_get_dmi_data(DMI_PRODUCT_SERIAL), + sizeof(bios_machineid)); /* * Get SMM Dell signature -- cgit v1.2.3 From 2744d2fde00dc8bcc3679eb72c81a63058e90faa Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Sat, 18 Jun 2016 00:54:46 +0200 Subject: hwmon: (dell-smm) Disallow fan_type() calls on broken machines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some Dell machines have especially broken SMM or BIOS which cause that once fan_type() is called then CPU fan speed going randomly up and down. And for fixing this behaviour reboot is required. So this patch creates fan_type blacklist of affected Dell machines and disallow fan_type() call on them to prevent that erratic behaviour. Old blacklist which disabled loading driver on some machines added in commits a4b45b25f18d ("hwmon: (dell-smm) Blacklist Dell Studio XPS 8100") and 6220f4ebd7b4 ("hwmon: (dell-smm) Blacklist Dell Studio XPS 8000") were moved to FAN_TYPE blacklist. Reported-by: Jan C Peters Signed-off-by: Pali Rohár Link: https://bugzilla.kernel.org/show_bug.cgi?id=100121 Cc: stable@vger.kernel.org # v4.0+, will need backport Signed-off-by: Guenter Roeck --- drivers/hwmon/dell-smm-hwmon.c | 36 +++++++++++++++++++++++++----------- 1 file changed, 25 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c index c8bd3fdd0710..4bbc58714868 100644 --- a/drivers/hwmon/dell-smm-hwmon.c +++ b/drivers/hwmon/dell-smm-hwmon.c @@ -73,6 +73,7 @@ static u32 i8k_hwmon_flags; static uint i8k_fan_mult = I8K_FAN_MULT; static uint i8k_pwm_mult; static uint i8k_fan_max = I8K_FAN_HIGH; +static bool disallow_fan_type_call; #define I8K_HWMON_HAVE_TEMP1 (1 << 0) #define I8K_HWMON_HAVE_TEMP2 (1 << 1) @@ -241,6 +242,9 @@ static int i8k_get_fan_type(int fan) { struct smm_regs regs = { .eax = I8K_SMM_GET_FAN_TYPE, }; + if (disallow_fan_type_call) + return -EINVAL; + regs.ebx = fan & 0xff; return i8k_smm(®s) ? : regs.eax & 0xff; } @@ -726,6 +730,9 @@ static struct attribute *i8k_attrs[] = { static umode_t i8k_is_visible(struct kobject *kobj, struct attribute *attr, int index) { + if (disallow_fan_type_call && + (index == 9 || index == 12)) + return 0; if (index >= 0 && index <= 1 && !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP1)) return 0; @@ -937,12 +944,14 @@ static struct dmi_system_id i8k_dmi_table[] __initdata = { MODULE_DEVICE_TABLE(dmi, i8k_dmi_table); -static struct dmi_system_id i8k_blacklist_dmi_table[] __initdata = { +/* + * On some machines once I8K_SMM_GET_FAN_TYPE is issued then CPU fan speed + * randomly going up and down due to bug in Dell SMM or BIOS. Here is blacklist + * of affected Dell machines for which we disallow I8K_SMM_GET_FAN_TYPE call. + * See bug: https://bugzilla.kernel.org/show_bug.cgi?id=100121 + */ +static struct dmi_system_id i8k_blacklist_fan_type_dmi_table[] __initdata = { { - /* - * CPU fan speed going up and down on Dell Studio XPS 8000 - * for unknown reasons. - */ .ident = "Dell Studio XPS 8000", .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), @@ -950,16 +959,19 @@ static struct dmi_system_id i8k_blacklist_dmi_table[] __initdata = { }, }, { - /* - * CPU fan speed going up and down on Dell Studio XPS 8100 - * for unknown reasons. - */ .ident = "Dell Studio XPS 8100", .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Studio XPS 8100"), }, }, + { + .ident = "Dell Inspiron 580", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Inspiron 580 "), + }, + }, { } }; @@ -974,8 +986,7 @@ static int __init i8k_probe(void) /* * Get DMI information */ - if (!dmi_check_system(i8k_dmi_table) || - dmi_check_system(i8k_blacklist_dmi_table)) { + if (!dmi_check_system(i8k_dmi_table)) { if (!ignore_dmi && !force) return -ENODEV; @@ -986,6 +997,9 @@ static int __init i8k_probe(void) i8k_get_dmi_data(DMI_BIOS_VERSION)); } + if (dmi_check_system(i8k_blacklist_fan_type_dmi_table)) + disallow_fan_type_call = true; + strlcpy(bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION), sizeof(bios_version)); strlcpy(bios_machineid, i8k_get_dmi_data(DMI_PRODUCT_SERIAL), -- cgit v1.2.3 From d90efc9ee0df3f13f248aaf47086b1e0ed6035ae Mon Sep 17 00:00:00 2001 From: Yakir Yang Date: Wed, 8 Jun 2016 10:13:27 -0400 Subject: drm/exynos: dp: Fix NULL pointer dereference due uninitialized connector Commit 3424e3a4f844 ("drm: bridge: analogix/dp: split exynos dp driver to bridge directory") split the Exynos DP core driver into a core driver and a bridge driver for the Analogix chip since that is also used by Rockchip. But the change introduced a regression causing a NULL pointer dereference when trying to access an uninitialized connector in the driver .get_modes: Fix this by instead of having a connector struct for both the Exynos and Analogix drivers, just use the connector initialized in the bridge driver. Fixes: 3424e3a4f844 ("drm: bridge: analogix/dp: split exynos dp driver to bridge directory") Reported-by: Marc Zyngier Signed-off-by: Yakir Yang Tested-by: Marc Zyngier Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_dp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c index 468498e3fec1..4c1fb3f8b5a6 100644 --- a/drivers/gpu/drm/exynos/exynos_dp.c +++ b/drivers/gpu/drm/exynos/exynos_dp.c @@ -34,7 +34,7 @@ struct exynos_dp_device { struct drm_encoder encoder; - struct drm_connector connector; + struct drm_connector *connector; struct drm_bridge *ptn_bridge; struct drm_device *drm_dev; struct device *dev; @@ -70,7 +70,7 @@ static int exynos_dp_poweroff(struct analogix_dp_plat_data *plat_data) static int exynos_dp_get_modes(struct analogix_dp_plat_data *plat_data) { struct exynos_dp_device *dp = to_dp(plat_data); - struct drm_connector *connector = &dp->connector; + struct drm_connector *connector = dp->connector; struct drm_display_mode *mode; int num_modes = 0; @@ -103,6 +103,7 @@ static int exynos_dp_bridge_attach(struct analogix_dp_plat_data *plat_data, int ret; drm_connector_register(connector); + dp->connector = connector; /* Pre-empt DP connector creation if there's a bridge */ if (dp->ptn_bridge) { -- cgit v1.2.3 From 5e0b37634cbb6bae69b7b15e1ea5f054dfaaa413 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 30 May 2016 20:20:22 -0400 Subject: drm/exynos: fimd: don't set .has_hw_trigger in s3c6400 driver data The field value is only checked in fimd_setup_trigger() if .trg_type is I80_HW_TRG so there's no point in setting this field for the s3c6400 if is never going to be used since .trg_type is not set. Signed-off-by: Javier Martinez Canillas Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 3efe1aa89416..1c23a8ff5e83 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -120,7 +120,6 @@ static struct fimd_driver_data s3c64xx_fimd_driver_data = { .timing_base = 0x0, .has_clksel = 1, .has_limited_fmt = 1, - .has_hw_trigger = 1, }; static struct fimd_driver_data exynos3_fimd_driver_data = { -- cgit v1.2.3 From e0d7461ceb5bb9b50e534262eb23e92deaaae6f1 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Thu, 2 Jun 2016 10:20:10 -0400 Subject: drm/exynos: don't use HW trigger for Exynos5420/5422/5800 Commit a6f75aa161c5 ("drm/exynos: fimd: add HW trigger support") added hardware trigger support to the FIMD controller driver. But this broke the display in at least the Exynos5800 Peach Pi Chromebook. So until the issue is fixed, avoid using HW trigger for the Exynos5420 based boards and use SW trigger as it was before the mentioned commit. Signed-off-by: Javier Martinez Canillas Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 1c23a8ff5e83..f10030ff00e6 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -170,14 +170,11 @@ static struct fimd_driver_data exynos5420_fimd_driver_data = { .lcdblk_vt_shift = 24, .lcdblk_bypass_shift = 15, .lcdblk_mic_bypass_shift = 11, - .trg_type = I80_HW_TRG, .has_shadowcon = 1, .has_vidoutcon = 1, .has_vtsel = 1, .has_mic_bypass = 1, .has_dp_clk = 1, - .has_hw_trigger = 1, - .has_trigger_per_te = 1, }; struct fimd_context { -- cgit v1.2.3 From ed4dc2718d3510f0fa5e6794f47b98549848f656 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Wed, 25 May 2016 14:42:56 +0200 Subject: drm/exynos: g2d: drop the _REG postfix from the stride defines This makes the defines consistent with the rest. Signed-off-by: Tobias Jakobi Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 493552368295..8564c3da0d22 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -48,13 +48,13 @@ /* registers for base address */ #define G2D_SRC_BASE_ADDR 0x0304 -#define G2D_SRC_STRIDE_REG 0x0308 +#define G2D_SRC_STRIDE 0x0308 #define G2D_SRC_COLOR_MODE 0x030C #define G2D_SRC_LEFT_TOP 0x0310 #define G2D_SRC_RIGHT_BOTTOM 0x0314 #define G2D_SRC_PLANE2_BASE_ADDR 0x0318 #define G2D_DST_BASE_ADDR 0x0404 -#define G2D_DST_STRIDE_REG 0x0408 +#define G2D_DST_STRIDE 0x0408 #define G2D_DST_COLOR_MODE 0x040C #define G2D_DST_LEFT_TOP 0x0410 #define G2D_DST_RIGHT_BOTTOM 0x0414 @@ -563,7 +563,7 @@ static enum g2d_reg_type g2d_get_reg_type(int reg_offset) switch (reg_offset) { case G2D_SRC_BASE_ADDR: - case G2D_SRC_STRIDE_REG: + case G2D_SRC_STRIDE: case G2D_SRC_COLOR_MODE: case G2D_SRC_LEFT_TOP: case G2D_SRC_RIGHT_BOTTOM: @@ -573,7 +573,7 @@ static enum g2d_reg_type g2d_get_reg_type(int reg_offset) reg_type = REG_TYPE_SRC_PLANE2; break; case G2D_DST_BASE_ADDR: - case G2D_DST_STRIDE_REG: + case G2D_DST_STRIDE: case G2D_DST_COLOR_MODE: case G2D_DST_LEFT_TOP: case G2D_DST_RIGHT_BOTTOM: @@ -968,8 +968,8 @@ static int g2d_check_reg_offset(struct device *dev, } else buf_info->types[reg_type] = BUF_TYPE_GEM; break; - case G2D_SRC_STRIDE_REG: - case G2D_DST_STRIDE_REG: + case G2D_SRC_STRIDE: + case G2D_DST_STRIDE: if (for_addr) goto err; -- cgit v1.2.3 From f0fcf43f285cdbc1bbc372919d68aea0cf4483d6 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Wed, 25 May 2016 14:35:41 +0200 Subject: drm/exynos: remove superfluous inclusions of fbdev header Neither of these files issue any fbdev related calls. Signed-off-by: Tobias Jakobi Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos7_drm_decon.c | 1 - drivers/gpu/drm/exynos/exynos_drm_core.c | 1 - drivers/gpu/drm/exynos/exynos_drm_fimd.c | 1 - 3 files changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos7_drm_decon.c b/drivers/gpu/drm/exynos/exynos7_drm_decon.c index f6223f907c15..7f9901b7777b 100644 --- a/drivers/gpu/drm/exynos/exynos7_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos7_drm_decon.c @@ -31,7 +31,6 @@ #include "exynos_drm_plane.h" #include "exynos_drm_drv.h" #include "exynos_drm_fb.h" -#include "exynos_drm_fbdev.h" #include "exynos_drm_iommu.h" /* diff --git a/drivers/gpu/drm/exynos/exynos_drm_core.c b/drivers/gpu/drm/exynos/exynos_drm_core.c index 011211e4167d..edbd98ff293e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_core.c +++ b/drivers/gpu/drm/exynos/exynos_drm_core.c @@ -15,7 +15,6 @@ #include #include "exynos_drm_drv.h" #include "exynos_drm_crtc.h" -#include "exynos_drm_fbdev.h" static LIST_HEAD(exynos_drm_subdrv_list); diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index f10030ff00e6..d47216488985 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -30,7 +30,6 @@ #include "exynos_drm_drv.h" #include "exynos_drm_fb.h" -#include "exynos_drm_fbdev.h" #include "exynos_drm_crtc.h" #include "exynos_drm_plane.h" #include "exynos_drm_iommu.h" -- cgit v1.2.3 From 41abbf5afa51136bcb2aeefc80bf5c3a005d0aa3 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Wed, 25 May 2016 14:30:07 +0200 Subject: drm/exynos: use logical AND in exynos_drm_plane_check_size() The current bitwise AND should result in the same assembler but this is what the code is actually supposed to do. Signed-off-by: Tobias Jakobi Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_plane.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c index 55f1d37c666a..77f12c00abf9 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c @@ -242,7 +242,7 @@ exynos_drm_plane_check_size(const struct exynos_drm_plane_config *config, state->v_ratio == (1 << 15)) height_ok = true; - if (width_ok & height_ok) + if (width_ok && height_ok) return 0; DRM_DEBUG_KMS("scaling mode is not supported"); -- cgit v1.2.3 From e6bd89232b4a4c9282da1ac8bdd798c2a30d9a46 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 Jun 2016 15:18:11 +0300 Subject: qed: Correct default vlan behavior When no vlan filter is configured, firmware has a configurable default on whether to pass only untagged packets or all packets regardless of their tagging. Driver currently doesn't set this field in the necessary ramrod, causing the default to always be 'receive all'. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 8fba87dd48af..7c199a94cbfc 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -72,6 +72,7 @@ int qed_sp_eth_vport_start(struct qed_hwfn *p_hwfn, p_ramrod->mtu = cpu_to_le16(p_params->mtu); p_ramrod->inner_vlan_removal_en = p_params->remove_inner_vlan; p_ramrod->drop_ttl0_en = p_params->drop_ttl0; + p_ramrod->untagged = p_params->only_untagged; SET_FIELD(rx_mode, ETH_VPORT_RX_MODE_UCAST_DROP_ALL, 1); SET_FIELD(rx_mode, ETH_VPORT_RX_MODE_MCAST_DROP_ALL, 1); -- cgit v1.2.3 From 326439883e17fca029f4ed05307480bdb6369877 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 Jun 2016 15:18:12 +0300 Subject: qed: Prevent VF from Tx-switching 'promisc' Internal loopback in driver is based on two things - first is the willingness of transmitter to use it [in case of VFs, this can be forced based on VEPA/VEB] and secondly on another vport classification configuration which should match the packet's destination. Current code allows non-linux VFs to configure a 'promisc' mode on Tx, meaning all traffic sent by VF would be loopbacked internally by firmware; This isn't considered a valid mode and as such should be prevented by PF. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 7c199a94cbfc..7e7ae83453d5 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -248,10 +248,6 @@ qed_sp_update_accept_mode(struct qed_hwfn *p_hwfn, SET_FIELD(state, ETH_VPORT_TX_MODE_UCAST_DROP_ALL, !!(accept_filter & QED_ACCEPT_NONE)); - SET_FIELD(state, ETH_VPORT_TX_MODE_UCAST_ACCEPT_ALL, - (!!(accept_filter & QED_ACCEPT_UCAST_MATCHED) && - !!(accept_filter & QED_ACCEPT_UCAST_UNMATCHED))); - SET_FIELD(state, ETH_VPORT_TX_MODE_MCAST_DROP_ALL, !!(accept_filter & QED_ACCEPT_NONE)); -- cgit v1.2.3 From a0d26d5a4fc8e13993279f788deeb08069e73b69 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 Jun 2016 15:18:13 +0300 Subject: qed*: Don't reset statistics on inner reload Several user APIs can cause driver to perform an inner-reload. Currently, doing this would cause the HW/FW statistics of the adapter to reset, which isn't the expected behavior [statistics should only reset on explicit unloads]. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 3 ++- drivers/net/ethernet/qlogic/qede/qede_main.c | 7 ++++--- include/linux/qed/qed_eth_if.h | 1 + 3 files changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 7e7ae83453d5..aada4c7e095f 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -1745,7 +1745,8 @@ static int qed_start_vport(struct qed_dev *cdev, start.vport_id, start.mtu); } - qed_reset_vport_stats(cdev); + if (params->clear_stats) + qed_reset_vport_stats(cdev); return 0; } diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 5733d1888223..f8e11f953acb 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -3231,7 +3231,7 @@ static int qede_stop_queues(struct qede_dev *edev) return rc; } -static int qede_start_queues(struct qede_dev *edev) +static int qede_start_queues(struct qede_dev *edev, bool clear_stats) { int rc, tc, i; int vlan_removal_en = 1; @@ -3462,6 +3462,7 @@ out: enum qede_load_mode { QEDE_LOAD_NORMAL, + QEDE_LOAD_RELOAD, }; static int qede_load(struct qede_dev *edev, enum qede_load_mode mode) @@ -3500,7 +3501,7 @@ static int qede_load(struct qede_dev *edev, enum qede_load_mode mode) goto err3; DP_INFO(edev, "Setup IRQs succeeded\n"); - rc = qede_start_queues(edev); + rc = qede_start_queues(edev, mode != QEDE_LOAD_RELOAD); if (rc) goto err4; DP_INFO(edev, "Start VPORT, RXQ and TXQ succeeded\n"); @@ -3555,7 +3556,7 @@ void qede_reload(struct qede_dev *edev, if (func) func(edev, args); - qede_load(edev, QEDE_LOAD_NORMAL); + qede_load(edev, QEDE_LOAD_RELOAD); mutex_lock(&edev->qede_lock); qede_config_rx_mode(edev->ndev); diff --git a/include/linux/qed/qed_eth_if.h b/include/linux/qed/qed_eth_if.h index 6ae8cb4a61d3..6c876a63558d 100644 --- a/include/linux/qed/qed_eth_if.h +++ b/include/linux/qed/qed_eth_if.h @@ -49,6 +49,7 @@ struct qed_start_vport_params { bool drop_ttl0; u8 vport_id; u16 mtu; + bool clear_stats; }; struct qed_stop_rxq_params { -- cgit v1.2.3 From db511c37d4eb2b4e7312791eb8f9b34ed867445e Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 Jun 2016 15:18:14 +0300 Subject: qed: Fix returning unlimited SPQ entries Driver has 2 sets of entries for handling ramrod configurations toward firmware - a regular pre-allocated set of entires and a possible 'unlimited' list of additional pending entries. In most scenarios the 'unlimited' list would not be used, but when it does the handling of the ramrod completion doesn't properly handle the release of the entry. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_spq.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c index acac6626a1b2..67d9893774d8 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_spq.c +++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c @@ -614,7 +614,9 @@ qed_spq_add_entry(struct qed_hwfn *p_hwfn, *p_en2 = *p_ent; - kfree(p_ent); + /* EBLOCK responsible to free the allocated p_ent */ + if (p_ent->comp_mode != QED_SPQ_MODE_EBLOCK) + kfree(p_ent); p_ent = p_en2; } @@ -749,6 +751,15 @@ int qed_spq_post(struct qed_hwfn *p_hwfn, * Thus, after gaining the answer perform the cleanup here. */ rc = qed_spq_block(p_hwfn, p_ent, fw_return_code); + + if (p_ent->queue == &p_spq->unlimited_pending) { + /* This is an allocated p_ent which does not need to + * return to pool. + */ + kfree(p_ent); + return rc; + } + if (rc) goto spq_post_fail2; @@ -844,8 +855,12 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn, found->comp_cb.function(p_hwfn, found->comp_cb.cookie, p_data, fw_return_code); - if (found->comp_mode != QED_SPQ_MODE_EBLOCK) - /* EBLOCK is responsible for freeing its own entry */ + if ((found->comp_mode != QED_SPQ_MODE_EBLOCK) || + (found->queue == &p_spq->unlimited_pending)) + /* EBLOCK is responsible for returning its own entry into the + * free list, unless it originally added the entry into the + * unlimited pending list. + */ qed_spq_return_entry(p_hwfn, found); /* Attempt to post pending requests */ -- cgit v1.2.3 From b639f197210d37905a6018ae4297659eb3f48f8f Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 Jun 2016 15:18:15 +0300 Subject: qed: Add missing port-mode The 'MODULE_FIBER' value replaced several other FIBER values in newer management firmware images, so existing code would fail to properly reflect its mode. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_hsi.h | 1 + drivers/net/ethernet/qlogic/qed/qed_main.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_hsi.h b/drivers/net/ethernet/qlogic/qed/qed_hsi.h index 9afc15fdbb02..e29ed5a69566 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_hsi.h +++ b/drivers/net/ethernet/qlogic/qed/qed_hsi.h @@ -3700,6 +3700,7 @@ struct public_port { #define MEDIA_DA_TWINAX 0x3 #define MEDIA_BASE_T 0x4 #define MEDIA_SFP_1G_FIBER 0x5 +#define MEDIA_MODULE_FIBER 0x6 #define MEDIA_KR 0xf0 #define MEDIA_NOT_PRESENT 0xff diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index 61cc6869fa65..c7e01b303540 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -1085,6 +1085,7 @@ static int qed_get_port_type(u32 media_type) case MEDIA_SFPP_10G_FIBER: case MEDIA_SFP_1G_FIBER: case MEDIA_XFP_FIBER: + case MEDIA_MODULE_FIBER: case MEDIA_KR: port_type = PORT_FIBRE; break; -- cgit v1.2.3 From 427460c83cdf55069eee49799a0caef7dde8df69 Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Thu, 16 Jun 2016 11:10:19 -0500 Subject: can: c_can: Update D_CAN TX and RX functions to 32 bit - fix Altera Cyclone access When testing CAN write floods on Altera's CycloneV, the first 2 bytes are sometimes 0x00, 0x00 or corrupted instead of the values sent. Also observed bytes 4 & 5 were corrupted in some cases. The D_CAN Data registers are 32 bits and changing from 16 bit writes to 32 bit writes fixes the problem. Testing performed on Altera CycloneV (D_CAN). Requesting tests on other C_CAN & D_CAN platforms. Reported-by: Richard Andrysek Signed-off-by: Thor Thayer Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 38 +++++++++++++++++++++++++++++++------- 1 file changed, 31 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index f91b094288da..e3dccd3200d5 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -332,9 +332,23 @@ static void c_can_setup_tx_object(struct net_device *dev, int iface, priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl); - for (i = 0; i < frame->can_dlc; i += 2) { - priv->write_reg(priv, C_CAN_IFACE(DATA1_REG, iface) + i / 2, - frame->data[i] | (frame->data[i + 1] << 8)); + if (priv->type == BOSCH_D_CAN) { + u32 data = 0, dreg = C_CAN_IFACE(DATA1_REG, iface); + + for (i = 0; i < frame->can_dlc; i += 4, dreg += 2) { + data = (u32)frame->data[i]; + data |= (u32)frame->data[i + 1] << 8; + data |= (u32)frame->data[i + 2] << 16; + data |= (u32)frame->data[i + 3] << 24; + priv->write_reg32(priv, dreg, data); + } + } else { + for (i = 0; i < frame->can_dlc; i += 2) { + priv->write_reg(priv, + C_CAN_IFACE(DATA1_REG, iface) + i / 2, + frame->data[i] | + (frame->data[i + 1] << 8)); + } } } @@ -402,10 +416,20 @@ static int c_can_read_msg_object(struct net_device *dev, int iface, u32 ctrl) } else { int i, dreg = C_CAN_IFACE(DATA1_REG, iface); - for (i = 0; i < frame->can_dlc; i += 2, dreg ++) { - data = priv->read_reg(priv, dreg); - frame->data[i] = data; - frame->data[i + 1] = data >> 8; + if (priv->type == BOSCH_D_CAN) { + for (i = 0; i < frame->can_dlc; i += 4, dreg += 2) { + data = priv->read_reg32(priv, dreg); + frame->data[i] = data; + frame->data[i + 1] = data >> 8; + frame->data[i + 2] = data >> 16; + frame->data[i + 3] = data >> 24; + } + } else { + for (i = 0; i < frame->can_dlc; i += 2, dreg++) { + data = priv->read_reg(priv, dreg); + frame->data[i] = data; + frame->data[i + 1] = data >> 8; + } } } -- cgit v1.2.3 From 43200a4480cbbe660309621817f54cbb93907108 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Mon, 13 Jun 2016 15:44:19 +0200 Subject: can: at91_can: RX queue could get stuck at high bus load At high bus load it could happen that "at91_poll()" enters with all RX message boxes filled up. If then at the end the "quota" is exceeded as well, "rx_next" will not be reset to the first RX mailbox and hence the interrupts remain disabled. Signed-off-by: Wolfgang Grandegger Tested-by: Amr Bekhit Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/at91_can.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 8b3275d7792a..8f5e93cb7975 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -712,9 +712,10 @@ static int at91_poll_rx(struct net_device *dev, int quota) /* upper group completed, look again in lower */ if (priv->rx_next > get_mb_rx_low_last(priv) && - quota > 0 && mb > get_mb_rx_last(priv)) { + mb > get_mb_rx_last(priv)) { priv->rx_next = get_mb_rx_first(priv); - goto again; + if (quota > 0) + goto again; } return received; -- cgit v1.2.3 From f155d9c0a138463c3c9380d35e54e433c1477336 Mon Sep 17 00:00:00 2001 From: Maximilian Schneider Date: Wed, 8 Jun 2016 18:00:26 +0000 Subject: can: gs_usb: Add Basic support for the bytewerk.org candleLight interface This patchs adds basic support for the bytewerk.org candleLight interface, a open hardware (CERN OHL) USB CAN adapter. Signed-off-by: Hubert Denkmair Signed-off-by: Maximilian Schneider Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/Kconfig | 3 ++- drivers/net/can/usb/gs_usb.c | 14 +++++++++++--- 2 files changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index bcb272f6c68a..2ff0df32b3d1 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -16,7 +16,8 @@ config CAN_ESD_USB2 config CAN_GS_USB tristate "Geschwister Schneider UG interfaces" ---help--- - This driver supports the Geschwister Schneider USB/CAN devices. + This driver supports the Geschwister Schneider and bytewerk.org + candleLight USB CAN interfaces USB/CAN devices If unsure choose N, choose Y for built in support, M to compile as module (module will be named: gs_usb). diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index 1556d4286235..acb0c8490673 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -1,7 +1,9 @@ -/* CAN driver for Geschwister Schneider USB/CAN devices. +/* CAN driver for Geschwister Schneider USB/CAN devices + * and bytewerk.org candleLight USB CAN interfaces. * - * Copyright (C) 2013 Geschwister Schneider Technologie-, + * Copyright (C) 2013-2016 Geschwister Schneider Technologie-, * Entwicklungs- und Vertriebs UG (Haftungsbeschränkt). + * Copyright (C) 2016 Hubert Denkmair * * Many thanks to all socketcan devs! * @@ -29,6 +31,9 @@ #define USB_GSUSB_1_VENDOR_ID 0x1d50 #define USB_GSUSB_1_PRODUCT_ID 0x606f +#define USB_CANDLELIGHT_VENDOR_ID 0x1209 +#define USB_CANDLELIGHT_PRODUCT_ID 0x2323 + #define GSUSB_ENDPOINT_IN 1 #define GSUSB_ENDPOINT_OUT 2 @@ -952,6 +957,8 @@ static void gs_usb_disconnect(struct usb_interface *intf) static const struct usb_device_id gs_usb_table[] = { { USB_DEVICE_INTERFACE_NUMBER(USB_GSUSB_1_VENDOR_ID, USB_GSUSB_1_PRODUCT_ID, 0) }, + { USB_DEVICE_INTERFACE_NUMBER(USB_CANDLELIGHT_VENDOR_ID, + USB_CANDLELIGHT_PRODUCT_ID, 0) }, {} /* Terminating entry */ }; @@ -969,5 +976,6 @@ module_usb_driver(gs_usb_driver); MODULE_AUTHOR("Maximilian Schneider "); MODULE_DESCRIPTION( "Socket CAN device driver for Geschwister Schneider Technologie-, " -"Entwicklungs- und Vertriebs UG. USB2.0 to CAN interfaces."); +"Entwicklungs- und Vertriebs UG. USB2.0 to CAN interfaces\n" +"and bytewerk.org candleLight USB CAN interfaces."); MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From ef0dab4aae14e25efddf1577736f8450132800c5 Mon Sep 17 00:00:00 2001 From: David Miller Date: Sat, 18 Jun 2016 23:52:25 -0700 Subject: PCI: Fix unaligned accesses in VC code The save/restore buffers for VC state is first composed of a 2-byte control register, then a bunch of 4-byte words. This causes unaligned accesses which trap on platform such as sparc. This is easy to fix by simply moving the buffer pointer forward by 4 bytes instead of 2 after dealing with the control register. The length adjustment needs to be changed likewise as well. Fixes: 5f8fc43217a0 ("PCI: Include pci/pcie/Kconfig directly from pci/Kconfig") Reported-by: Meelis Roos Reported-by: Anatoly Pugachev Signed-off-by: David S. Miller Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org # v4.6+ --- drivers/pci/vc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/vc.c b/drivers/pci/vc.c index dfbab61a1b47..1fa3a3219c45 100644 --- a/drivers/pci/vc.c +++ b/drivers/pci/vc.c @@ -221,9 +221,9 @@ static int pci_vc_do_save_buffer(struct pci_dev *dev, int pos, else pci_write_config_word(dev, pos + PCI_VC_PORT_CTRL, *(u16 *)buf); - buf += 2; + buf += 4; } - len += 2; + len += 4; /* * If we have any Low Priority VCs and a VC Arbitration Table Offset -- cgit v1.2.3 From 48a70e1ca85e3b484791e100bb403c05ef9d37c8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 18 Jun 2016 11:38:44 +0300 Subject: drm/amdgpu: precedence bug in amdgpu_device_init() ! has higher precedence than bitwise & so we need to add parenthesis for this to work as intended. Fixes: 048765ad5af7 ('amdgpu: fix asic initialization for virtualized environments (v2)') Signed-off-by: Dan Carpenter Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 66482b429458..6e920086af46 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -1535,7 +1535,7 @@ int amdgpu_device_init(struct amdgpu_device *adev, /* Post card if necessary */ if (!amdgpu_card_posted(adev) || (adev->virtualization.is_virtual && - !adev->virtualization.caps & AMDGPU_VIRT_CAPS_SRIOV_EN)) { + !(adev->virtualization.caps & AMDGPU_VIRT_CAPS_SRIOV_EN))) { if (!adev->bios) { dev_err(adev->dev, "Card not posted and no BIOS - ignoring\n"); return -EINVAL; -- cgit v1.2.3 From 29b9c528b8c295911e8b1e515273e89a2b7fa2d8 Mon Sep 17 00:00:00 2001 From: Nicolas Iooss Date: Sat, 18 Jun 2016 22:55:00 +0200 Subject: drm/amdgpu: initialize amdgpu_cgs_acpi_eval_object result value amdgpu_cgs_acpi_eval_object() returned the value of variable "result" without initializing it first. This bug has been found by compiling the kernel with clang. The compiler complained: drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:972:14: error: variable 'result' is used uninitialized whenever 'for' loop exits because its condition is false [-Werror,-Wsometimes-uninitialized] for (i = 0; i < count; i++) { ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:1011:9: note: uninitialized use occurs here return result; ^~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:972:14: note: remove the condition if it is always true for (i = 0; i < count; i++) { ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:864:12: note: initialize the variable 'result' to silence this warning int result; ^ = 0 Fixes: 3f1d35a03b3c ("drm/amdgpu: implement new cgs interface for acpi function") Signed-off-by: Nicolas Iooss Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index 8943099eb135..cf6f49fc1c75 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -909,7 +909,7 @@ static int amdgpu_cgs_acpi_eval_object(struct cgs_device *cgs_device, struct cgs_acpi_method_argument *argument = NULL; uint32_t i, count; acpi_status status; - int result; + int result = 0; uint32_t func_no = 0xFFFFFFFF; handle = ACPI_HANDLE(&adev->pdev->dev); -- cgit v1.2.3 From a5e9b85a6540df6c4074d3a56674f6fb6c5fc830 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 17 Jun 2016 17:24:23 +0000 Subject: clk: Fix return value check in oxnas_stdclk_probe() In case of error, the function syscon_node_to_regmap() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Acked-by: Neil Armstrong Fixes: 0bbd72b4c64f ("clk: Add Oxford Semiconductor OXNAS Standard Clocks") Signed-off-by: Stephen Boyd --- drivers/clk/clk-oxnas.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/clk-oxnas.c b/drivers/clk/clk-oxnas.c index efba7d4dbcfc..79bcb2e42060 100644 --- a/drivers/clk/clk-oxnas.c +++ b/drivers/clk/clk-oxnas.c @@ -144,9 +144,9 @@ static int oxnas_stdclk_probe(struct platform_device *pdev) return -ENOMEM; regmap = syscon_node_to_regmap(of_get_parent(np)); - if (!regmap) { + if (IS_ERR(regmap)) { dev_err(&pdev->dev, "failed to have parent regmap\n"); - return -EINVAL; + return PTR_ERR(regmap); } for (i = 0; i < ARRAY_SIZE(clk_oxnas_init); i++) { -- cgit v1.2.3 From 1b7e38b92b0bbd363369f5160f13f4d26140972d Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Fri, 27 May 2016 16:09:25 +0200 Subject: drm: atmel-hlcdc: actually disable scaling when no scaling is required The driver is only enabling scaling, but never disabling it, thus, if you enable the scaling feature once it stays enabled forever. Signed-off-by: Boris Brezillon Reported-by: Alex Vazquez Reviewed-by: Nicolas Ferre Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support") Cc: --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c index aef3ca8a81fa..016c191221f3 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c @@ -339,6 +339,8 @@ atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane, atmel_hlcdc_layer_update_cfg(&plane->layer, 13, 0xffffffff, factor_reg); + } else { + atmel_hlcdc_layer_update_cfg(&plane->layer, 13, 0xffffffff, 0); } } -- cgit v1.2.3 From 0b1e1eb76220afa043b2733dfe61f5927cf0e458 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Fri, 3 Jun 2016 09:17:36 +0200 Subject: drm: atmel-hlcdc: Fix OF graph parsing atmel_hlcdc_create_outputs() iterates over OF graph nodes and releases the node (using of_node_put()) after each iteration, which is wrong since for_each_endpoint_of_node() is already taking care of that. Move the of_node_put() call in the error path. Signed-off-by: Boris Brezillon Reviewed-by: Nicolas Ferre Fixes: 17a8e03e7e97 ("drm: atmel-hlcdc: rework the output code to support drm bridges") --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c index 39802c0539b6..3d34fc4ca826 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c @@ -266,9 +266,10 @@ int atmel_hlcdc_create_outputs(struct drm_device *dev) if (!ret) ret = atmel_hlcdc_check_endpoint(dev, &ep); - of_node_put(ep_np); - if (ret) + if (ret) { + of_node_put(ep_np); return ret; + } } for_each_endpoint_of_node(dev->dev->of_node, ep_np) { @@ -276,9 +277,10 @@ int atmel_hlcdc_create_outputs(struct drm_device *dev) if (!ret) ret = atmel_hlcdc_attach_endpoint(dev, &ep); - of_node_put(ep_np); - if (ret) + if (ret) { + of_node_put(ep_np); return ret; + } } return 0; -- cgit v1.2.3 From 1d7b84d12af8312b52316029f1fa0fa4eac3c9e4 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Fri, 17 Jun 2016 18:21:01 +0800 Subject: drm/amd/powerplay: fix logic error. the error lead powerplay can't get display info in DGPU case. store_cc6_data just implement in APU. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c index fa208ada6892..efb77eda7508 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c @@ -306,10 +306,14 @@ int phm_store_dal_configuration_data(struct pp_hwmgr *hwmgr, { PHM_FUNC_CHECK(hwmgr); - if (hwmgr->hwmgr_func->store_cc6_data == NULL) + if (display_config == NULL) return -EINVAL; hwmgr->display_config = *display_config; + + if (hwmgr->hwmgr_func->store_cc6_data == NULL) + return -EINVAL; + /* to do pass other display configuration in furture */ if (hwmgr->hwmgr_func->store_cc6_data) -- cgit v1.2.3 From 576b4401b1971fe40be4cfd379430a61cd8426b2 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 13 Jun 2016 17:39:19 +0800 Subject: drm/amd/powerplay: fix bug that function parameter was incorect. Wrong value passed to acpi_pcie_perf_request. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Reviewed-by: Ken Wang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c b/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c index 58742e0d1492..d19a9b624242 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c @@ -77,7 +77,7 @@ int acpi_pcie_perf_request(void *device, uint8_t perf_req, bool advertise) ATCS_FUNCTION_PCIE_PERFORMANCE_REQUEST, &atcs_input, &atcs_output, - 0, + 1, sizeof(atcs_input), sizeof(atcs_output)); if (result != 0) -- cgit v1.2.3 From 0a4fef559b69ae2e682c98f31d53a225fbda78bd Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 14 Jun 2016 18:36:36 +0800 Subject: drm/amd/powerplay: need to notify system bios pcie device ready before request performance state. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Reviewed-by: Ken Wang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c | 16 +++++++++++++++- drivers/gpu/drm/amd/powerplay/inc/pp_acpi.h | 1 + 2 files changed, 16 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c b/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c index d19a9b624242..a3c38bbd1e94 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c @@ -44,6 +44,20 @@ bool acpi_atcs_functions_supported(void *device, uint32_t index) return result == 0 ? (output_buf.function_bits & (1 << (index - 1))) != 0 : false; } +bool acpi_atcs_notify_pcie_device_ready(void *device) +{ + int32_t temp_buffer = 1; + + return cgs_call_acpi_method(device, CGS_ACPI_METHOD_ATCS, + ATCS_FUNCTION_PCIE_DEVICE_READY_NOTIFICATION, + &temp_buffer, + NULL, + 0, + sizeof(temp_buffer), + 0); +} + + int acpi_pcie_perf_request(void *device, uint8_t perf_req, bool advertise) { struct atcs_pref_req_input atcs_input; @@ -52,7 +66,7 @@ int acpi_pcie_perf_request(void *device, uint8_t perf_req, bool advertise) int result; struct cgs_system_info info = {0}; - if (!acpi_atcs_functions_supported(device, ATCS_FUNCTION_PCIE_PERFORMANCE_REQUEST)) + if( 0 != acpi_atcs_notify_pcie_device_ready(device)) return -EINVAL; info.size = sizeof(struct cgs_system_info); diff --git a/drivers/gpu/drm/amd/powerplay/inc/pp_acpi.h b/drivers/gpu/drm/amd/powerplay/inc/pp_acpi.h index 3bd5e69b9045..3df5de2cdab0 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/pp_acpi.h +++ b/drivers/gpu/drm/amd/powerplay/inc/pp_acpi.h @@ -26,3 +26,4 @@ extern bool acpi_atcs_functions_supported(void *device, extern int acpi_pcie_perf_request(void *device, uint8_t perf_req, bool advertise); +extern bool acpi_atcs_notify_pcie_device_ready(void *device); -- cgit v1.2.3 From 919e334dec283294acd99951d016e59ad725c9a7 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 11 May 2016 17:04:07 +0800 Subject: drm/amd/powerplay: enable PowerContainment feature for polaris10/11. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index 1400bc420881..07159958e77d 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -2606,6 +2606,7 @@ int polaris10_set_features_platform_caps(struct pp_hwmgr *hwmgr) phm_cap_set(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_FanSpeedInTableIsRPM); + if (hwmgr->chip_id == CHIP_POLARIS11) phm_cap_set(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_SPLLShutdownSupport); @@ -2938,6 +2939,9 @@ int polaris10_hwmgr_backend_init(struct pp_hwmgr *hwmgr) data->vddci_control = POLARIS10_VOLTAGE_CONTROL_NONE; data->mvdd_control = POLARIS10_VOLTAGE_CONTROL_NONE; + data->enable_tdc_limit_feature = true; + data->enable_pkg_pwr_tracking_feature = true; + if (atomctrl_is_voltage_controled_by_gpio_v3(hwmgr, VOLTAGE_TYPE_VDDC, VOLTAGE_OBJ_SVID2)) data->voltage_control = POLARIS10_VOLTAGE_CONTROL_BY_SVID2; -- cgit v1.2.3 From a2fb4934e960b11e4430dccc08d606c99910b447 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 13 Jun 2016 17:46:31 +0800 Subject: drm/amd/powerplay: initialize variables which were missed. Missing pcie dpm settings. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Reviewed-by: Ken Wang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c | 2 ++ drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 1 + drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c | 1 + 3 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c index 586f73276226..92912ab20944 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c @@ -633,6 +633,8 @@ static int fiji_hwmgr_backend_init(struct pp_hwmgr *hwmgr) data->vddci_control = FIJI_VOLTAGE_CONTROL_NONE; data->mvdd_control = FIJI_VOLTAGE_CONTROL_NONE; + data->force_pcie_gen = PP_PCIEGenInvalid; + if (atomctrl_is_voltage_controled_by_gpio_v3(hwmgr, VOLTAGE_TYPE_VDDC, VOLTAGE_OBJ_SVID2)) data->voltage_control = FIJI_VOLTAGE_CONTROL_BY_SVID2; diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index 07159958e77d..643677fb5212 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -2941,6 +2941,7 @@ int polaris10_hwmgr_backend_init(struct pp_hwmgr *hwmgr) data->enable_tdc_limit_feature = true; data->enable_pkg_pwr_tracking_feature = true; + data->force_pcie_gen = PP_PCIEGenInvalid; if (atomctrl_is_voltage_controled_by_gpio_v3(hwmgr, VOLTAGE_TYPE_VDDC, VOLTAGE_OBJ_SVID2)) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c index d27e8c40602a..233eb7f36c1d 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c @@ -4489,6 +4489,7 @@ int tonga_hwmgr_backend_init(struct pp_hwmgr *hwmgr) data->vdd_ci_control = TONGA_VOLTAGE_CONTROL_NONE; data->vdd_gfx_control = TONGA_VOLTAGE_CONTROL_NONE; data->mvdd_control = TONGA_VOLTAGE_CONTROL_NONE; + data->force_pcie_gen = PP_PCIEGenInvalid; if (atomctrl_is_voltage_controled_by_gpio_v3(hwmgr, VOLTAGE_TYPE_VDDC, VOLTAGE_OBJ_SVID2)) { -- cgit v1.2.3 From 40787ef21c2889fc3d96a11775fa412e715d7d48 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 8 Jun 2016 19:41:00 +0800 Subject: drm/amd/powerplay: disable UVD SMU handshake for MCLK. sync up with internal programming recommendations. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index 643677fb5212..5ecde13e4893 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -2252,6 +2252,9 @@ static int polaris10_enable_deep_sleep_master_switch(struct pp_hwmgr *hwmgr) static int polaris10_enable_sclk_mclk_dpm(struct pp_hwmgr *hwmgr) { struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + uint32_t soft_register_value = 0; + uint32_t handshake_disables_offset = data->soft_regs_start + + offsetof(SMU74_SoftRegisters, HandshakeDisables); /* enable SCLK dpm */ if (!data->sclk_dpm_key_disabled) @@ -2262,6 +2265,12 @@ static int polaris10_enable_sclk_mclk_dpm(struct pp_hwmgr *hwmgr) /* enable MCLK dpm */ if (0 == data->mclk_dpm_key_disabled) { +/* Disable UVD - SMU handshake for MCLK. */ + soft_register_value = cgs_read_ind_register(hwmgr->device, + CGS_IND_REG__SMC, handshake_disables_offset); + soft_register_value |= SMU7_UVD_MCLK_HANDSHAKE_DISABLE; + cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, + handshake_disables_offset, soft_register_value); PP_ASSERT_WITH_CODE( (0 == smum_send_msg_to_smc(hwmgr->smumgr, -- cgit v1.2.3 From 9a3c1b342be28a14006f644528dd9baad43db443 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 8 Jun 2016 19:42:48 +0800 Subject: drm/amd/powrplay: enable stutter_mode for polaris. To minimize the dram power expenditure during static -screen Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index 5ecde13e4893..c2f5bec272c4 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -1296,7 +1296,6 @@ static int polaris10_populate_single_memory_level(struct pp_hwmgr *hwmgr, } mem_level->MclkFrequency = clock; - mem_level->StutterEnable = 0; mem_level->EnabledForThrottle = 1; mem_level->EnabledForActivity = 0; mem_level->UpHyst = 0; @@ -1363,7 +1362,7 @@ static int polaris10_populate_all_memory_levels(struct pp_hwmgr *hwmgr) * a higher state by default such that we are not effected by * up threshold or and MCLK DPM latency. */ - levels[0].ActivityLevel = (uint16_t)data->mclk_dpm0_activity_target; + levels[0].ActivityLevel = 0x1f; CONVERT_FROM_HOST_TO_SMC_US(levels[0].ActivityLevel); data->smc_state_table.MemoryDpmLevelCount = @@ -2951,6 +2950,7 @@ int polaris10_hwmgr_backend_init(struct pp_hwmgr *hwmgr) data->enable_tdc_limit_feature = true; data->enable_pkg_pwr_tracking_feature = true; data->force_pcie_gen = PP_PCIEGenInvalid; + data->mclk_stutter_mode_threshold = 40000; if (atomctrl_is_voltage_controled_by_gpio_v3(hwmgr, VOLTAGE_TYPE_VDDC, VOLTAGE_OBJ_SVID2)) -- cgit v1.2.3 From 31b21243776e1f41813f40ce16c465bf03acd9ba Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 7 Jun 2016 18:38:39 +0800 Subject: drm/amd/powerplay: add avfs related define for polaris Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/inc/smu74.h | 75 +++++++++++++++++++--- drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h | 42 ++++++++---- 2 files changed, 98 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/inc/smu74.h b/drivers/gpu/drm/amd/powerplay/inc/smu74.h index 1a12d85b8e97..fd10a9fa843d 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/smu74.h +++ b/drivers/gpu/drm/amd/powerplay/inc/smu74.h @@ -34,6 +34,30 @@ #define SMU__NUM_LCLK_DPM_LEVELS 8 #define SMU__NUM_PCIE_DPM_LEVELS 8 +#define EXP_M1 35 +#define EXP_M2 92821 +#define EXP_B 66629747 + +#define EXP_M1_1 365 +#define EXP_M2_1 658700 +#define EXP_B_1 305506134 + +#define EXP_M1_2 189 +#define EXP_M2_2 379692 +#define EXP_B_2 194609469 + +#define EXP_M1_3 99 +#define EXP_M2_3 217915 +#define EXP_B_3 122255994 + +#define EXP_M1_4 51 +#define EXP_M2_4 122643 +#define EXP_B_4 74893384 + +#define EXP_M1_5 423 +#define EXP_M2_5 1103326 +#define EXP_B_5 728122621 + enum SID_OPTION { SID_OPTION_HI, SID_OPTION_LO, @@ -548,20 +572,20 @@ struct SMU74_Firmware_Header { uint32_t CacConfigTable; uint32_t CacStatusTable; - uint32_t mcRegisterTable; - uint32_t mcArbDramTimingTable; - - - uint32_t PmFuseTable; uint32_t Globals; uint32_t ClockStretcherTable; uint32_t VftTable; - uint32_t Reserved[21]; + uint32_t Reserved1; + uint32_t AvfsTable; + uint32_t AvfsCksOffGbvTable; + uint32_t AvfsMeanNSigma; + uint32_t AvfsSclkOffsetTable; + uint32_t Reserved[16]; uint32_t Signature; }; @@ -701,8 +725,6 @@ VR Config info is contained in dpmTable.VRConfig */ struct SMU_ClockStretcherDataTableEntry { uint8_t minVID; uint8_t maxVID; - - uint16_t setting; }; typedef struct SMU_ClockStretcherDataTableEntry SMU_ClockStretcherDataTableEntry; @@ -769,6 +791,43 @@ struct VFT_TABLE_t { typedef struct VFT_TABLE_t VFT_TABLE_t; +/* Total margin, root mean square of Fmax + DC + Platform */ +struct AVFS_Margin_t { + VFT_CELL_t Cell[NUM_VFT_COLUMNS]; +}; +typedef struct AVFS_Margin_t AVFS_Margin_t; + +#define BTCGB_VDROOP_TABLE_MAX_ENTRIES 2 +#define AVFSGB_VDROOP_TABLE_MAX_ENTRIES 2 + +struct GB_VDROOP_TABLE_t { + int32_t a0; + int32_t a1; + int32_t a2; + uint32_t spare; +}; +typedef struct GB_VDROOP_TABLE_t GB_VDROOP_TABLE_t; + +struct AVFS_CksOff_Gbv_t { + VFT_CELL_t Cell[NUM_VFT_COLUMNS]; +}; +typedef struct AVFS_CksOff_Gbv_t AVFS_CksOff_Gbv_t; + +struct AVFS_meanNsigma_t { + uint32_t Aconstant[3]; + uint16_t DC_tol_sigma; + uint16_t Platform_mean; + uint16_t Platform_sigma; + uint16_t PSM_Age_CompFactor; + uint8_t Static_Voltage_Offset[NUM_VFT_COLUMNS]; +}; +typedef struct AVFS_meanNsigma_t AVFS_meanNsigma_t; + +struct AVFS_Sclk_Offset_t { + uint16_t Sclk_Offset[8]; +}; +typedef struct AVFS_Sclk_Offset_t AVFS_Sclk_Offset_t; + #endif diff --git a/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h b/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h index 0dfe82336dc7..b85ff5400e57 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h +++ b/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h @@ -223,6 +223,16 @@ struct SMU74_Discrete_StateInfo { typedef struct SMU74_Discrete_StateInfo SMU74_Discrete_StateInfo; +struct SMU_QuadraticCoeffs { + int32_t m1; + uint32_t b; + + int16_t m2; + uint8_t m1_shift; + uint8_t m2_shift; +}; +typedef struct SMU_QuadraticCoeffs SMU_QuadraticCoeffs; + struct SMU74_Discrete_DpmTable { SMU74_PIDController GraphicsPIDController; @@ -258,7 +268,14 @@ struct SMU74_Discrete_DpmTable { uint8_t ThermOutPolarity; uint8_t ThermOutMode; uint8_t BootPhases; - uint32_t Reserved[4]; + + uint8_t VRHotLevel; + uint8_t Reserved1[3]; + uint16_t FanStartTemperature; + uint16_t FanStopTemperature; + uint16_t MaxVoltage; + uint16_t Reserved2; + uint32_t Reserved[1]; SMU74_Discrete_GraphicsLevel GraphicsLevel[SMU74_MAX_LEVELS_GRAPHICS]; SMU74_Discrete_MemoryLevel MemoryACPILevel; @@ -347,6 +364,8 @@ struct SMU74_Discrete_DpmTable { uint32_t CurrSclkPllRange; sclkFcwRange_t SclkFcwRangeTable[NUM_SCLK_RANGE]; + GB_VDROOP_TABLE_t BTCGB_VDROOP_TABLE[BTCGB_VDROOP_TABLE_MAX_ENTRIES]; + SMU_QuadraticCoeffs AVFSGB_VDROOP_TABLE[AVFSGB_VDROOP_TABLE_MAX_ENTRIES]; }; typedef struct SMU74_Discrete_DpmTable SMU74_Discrete_DpmTable; @@ -550,16 +569,6 @@ struct SMU7_AcpiScoreboard { typedef struct SMU7_AcpiScoreboard SMU7_AcpiScoreboard; -struct SMU_QuadraticCoeffs { - int32_t m1; - uint32_t b; - - int16_t m2; - uint8_t m1_shift; - uint8_t m2_shift; -}; -typedef struct SMU_QuadraticCoeffs SMU_QuadraticCoeffs; - struct SMU74_Discrete_PmFuses { uint8_t BapmVddCVidHiSidd[8]; uint8_t BapmVddCVidLoSidd[8]; @@ -821,6 +830,17 @@ typedef struct SMU7_GfxCuPgScoreboard SMU7_GfxCuPgScoreboard; #define DB_PCC_SHIFT 26 #define DB_EDC_SHIFT 27 +#define BTCGB0_Vdroop_Enable_MASK 0x1 +#define BTCGB1_Vdroop_Enable_MASK 0x2 +#define AVFSGB0_Vdroop_Enable_MASK 0x4 +#define AVFSGB1_Vdroop_Enable_MASK 0x8 + +#define BTCGB0_Vdroop_Enable_SHIFT 0 +#define BTCGB1_Vdroop_Enable_SHIFT 1 +#define AVFSGB0_Vdroop_Enable_SHIFT 2 +#define AVFSGB1_Vdroop_Enable_SHIFT 3 + + #pragma pack(pop) -- cgit v1.2.3 From c11cb70483c33404d1c0cf9aa48e7627eecbe14d Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 8 Jun 2016 19:17:31 +0800 Subject: drm/amdgpu/atombios: add avfs struct for Polaris10/11 Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/include/atombios.h | 72 ++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/include/atombios.h b/drivers/gpu/drm/amd/include/atombios.h index 32f3e345de08..3493da5c8f0e 100644 --- a/drivers/gpu/drm/amd/include/atombios.h +++ b/drivers/gpu/drm/amd/include/atombios.h @@ -5538,6 +5538,78 @@ typedef struct _ATOM_ASIC_PROFILING_INFO_V3_5 ULONG ulReserved[12]; }ATOM_ASIC_PROFILING_INFO_V3_5; +/* for Polars10/11 AVFS parameters */ +typedef struct _ATOM_ASIC_PROFILING_INFO_V3_6 +{ + ATOM_COMMON_TABLE_HEADER asHeader; + ULONG ulMaxVddc; + ULONG ulMinVddc; + USHORT usLkgEuseIndex; + UCHAR ucLkgEfuseBitLSB; + UCHAR ucLkgEfuseLength; + ULONG ulLkgEncodeLn_MaxDivMin; + ULONG ulLkgEncodeMax; + ULONG ulLkgEncodeMin; + EFUSE_LINEAR_FUNC_PARAM sRoFuse; + ULONG ulEvvDefaultVddc; + ULONG ulEvvNoCalcVddc; + ULONG ulSpeed_Model; + ULONG ulSM_A0; + ULONG ulSM_A1; + ULONG ulSM_A2; + ULONG ulSM_A3; + ULONG ulSM_A4; + ULONG ulSM_A5; + ULONG ulSM_A6; + ULONG ulSM_A7; + UCHAR ucSM_A0_sign; + UCHAR ucSM_A1_sign; + UCHAR ucSM_A2_sign; + UCHAR ucSM_A3_sign; + UCHAR ucSM_A4_sign; + UCHAR ucSM_A5_sign; + UCHAR ucSM_A6_sign; + UCHAR ucSM_A7_sign; + ULONG ulMargin_RO_a; + ULONG ulMargin_RO_b; + ULONG ulMargin_RO_c; + ULONG ulMargin_fixed; + ULONG ulMargin_Fmax_mean; + ULONG ulMargin_plat_mean; + ULONG ulMargin_Fmax_sigma; + ULONG ulMargin_plat_sigma; + ULONG ulMargin_DC_sigma; + ULONG ulLoadLineSlop; + ULONG ulaTDClimitPerDPM[8]; + ULONG ulaNoCalcVddcPerDPM[8]; + ULONG ulAVFS_meanNsigma_Acontant0; + ULONG ulAVFS_meanNsigma_Acontant1; + ULONG ulAVFS_meanNsigma_Acontant2; + USHORT usAVFS_meanNsigma_DC_tol_sigma; + USHORT usAVFS_meanNsigma_Platform_mean; + USHORT usAVFS_meanNsigma_Platform_sigma; + ULONG ulGB_VDROOP_TABLE_CKSOFF_a0; + ULONG ulGB_VDROOP_TABLE_CKSOFF_a1; + ULONG ulGB_VDROOP_TABLE_CKSOFF_a2; + ULONG ulGB_VDROOP_TABLE_CKSON_a0; + ULONG ulGB_VDROOP_TABLE_CKSON_a1; + ULONG ulGB_VDROOP_TABLE_CKSON_a2; + ULONG ulAVFSGB_FUSE_TABLE_CKSOFF_m1; + USHORT usAVFSGB_FUSE_TABLE_CKSOFF_m2; + ULONG ulAVFSGB_FUSE_TABLE_CKSOFF_b; + ULONG ulAVFSGB_FUSE_TABLE_CKSON_m1; + USHORT usAVFSGB_FUSE_TABLE_CKSON_m2; + ULONG ulAVFSGB_FUSE_TABLE_CKSON_b; + USHORT usMaxVoltage_0_25mv; + UCHAR ucEnableGB_VDROOP_TABLE_CKSOFF; + UCHAR ucEnableGB_VDROOP_TABLE_CKSON; + UCHAR ucEnableGB_FUSE_TABLE_CKSOFF; + UCHAR ucEnableGB_FUSE_TABLE_CKSON; + USHORT usPSM_Age_ComFactor; + UCHAR ucEnableApplyAVFS_CKS_OFF_Voltage; + UCHAR ucReserved; +}ATOM_ASIC_PROFILING_INFO_V3_6; + typedef struct _ATOM_SCLK_FCW_RANGE_ENTRY_V1{ ULONG ulMaxSclkFreq; -- cgit v1.2.3 From 432c3a3ca794bd2301425cb58bf097fc26690c17 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 8 Jun 2016 19:39:42 +0800 Subject: drm/amd/powerplay: enable avfs feature for polaris avfs feature is for voltage control based on gpu system clock on polaris10 Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 90 +++++++++++++++++++++- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h | 3 + .../drm/amd/powerplay/hwmgr/polaris10_thermal.c | 6 +- drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c | 43 +++++++++++ drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.h | 32 ++++++++ .../gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h | 1 + .../drm/amd/powerplay/smumgr/polaris10_smumgr.c | 50 ++++++++---- 7 files changed, 208 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index c2f5bec272c4..f730ec8b529d 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -1303,7 +1303,6 @@ static int polaris10_populate_single_memory_level(struct pp_hwmgr *hwmgr, mem_level->VoltageDownHyst = 0; mem_level->ActivityLevel = (uint16_t)data->mclk_activity_target; mem_level->StutterEnable = false; - mem_level->DisplayWatermark = PPSMC_DISPLAY_WATERMARK_LOW; data->display_timing.num_existing_displays = info.display_count; @@ -1955,6 +1954,90 @@ static int polaris10_populate_vr_config(struct pp_hwmgr *hwmgr, return 0; } + +int polaris10_populate_avfs_parameters(struct pp_hwmgr *hwmgr) +{ + struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + SMU74_Discrete_DpmTable *table = &(data->smc_state_table); + int result = 0; + struct pp_atom_ctrl__avfs_parameters avfs_params = {0}; + AVFS_meanNsigma_t AVFS_meanNsigma = { {0} }; + AVFS_Sclk_Offset_t AVFS_SclkOffset = { {0} }; + uint32_t tmp, i; + struct pp_smumgr *smumgr = hwmgr->smumgr; + struct polaris10_smumgr *smu_data = (struct polaris10_smumgr *)(smumgr->backend); + + struct phm_ppt_v1_information *table_info = + (struct phm_ppt_v1_information *)hwmgr->pptable; + struct phm_ppt_v1_clock_voltage_dependency_table *sclk_table = + table_info->vdd_dep_on_sclk; + + + if (smu_data->avfs.avfs_btc_status == AVFS_BTC_NOTSUPPORTED) + return result; + + result = atomctrl_get_avfs_information(hwmgr, &avfs_params); + + if (0 == result) { + table->BTCGB_VDROOP_TABLE[0].a0 = PP_HOST_TO_SMC_UL(avfs_params.ulGB_VDROOP_TABLE_CKSON_a0); + table->BTCGB_VDROOP_TABLE[0].a1 = PP_HOST_TO_SMC_UL(avfs_params.ulGB_VDROOP_TABLE_CKSON_a1); + table->BTCGB_VDROOP_TABLE[0].a2 = PP_HOST_TO_SMC_UL(avfs_params.ulGB_VDROOP_TABLE_CKSON_a2); + table->BTCGB_VDROOP_TABLE[1].a0 = PP_HOST_TO_SMC_UL(avfs_params.ulGB_VDROOP_TABLE_CKSOFF_a0); + table->BTCGB_VDROOP_TABLE[1].a1 = PP_HOST_TO_SMC_UL(avfs_params.ulGB_VDROOP_TABLE_CKSOFF_a1); + table->BTCGB_VDROOP_TABLE[1].a2 = PP_HOST_TO_SMC_UL(avfs_params.ulGB_VDROOP_TABLE_CKSOFF_a2); + table->AVFSGB_VDROOP_TABLE[0].m1 = PP_HOST_TO_SMC_UL(avfs_params.ulAVFSGB_FUSE_TABLE_CKSON_m1); + table->AVFSGB_VDROOP_TABLE[0].m2 = PP_HOST_TO_SMC_US(avfs_params.usAVFSGB_FUSE_TABLE_CKSON_m2); + table->AVFSGB_VDROOP_TABLE[0].b = PP_HOST_TO_SMC_UL(avfs_params.ulAVFSGB_FUSE_TABLE_CKSON_b); + table->AVFSGB_VDROOP_TABLE[0].m1_shift = 24; + table->AVFSGB_VDROOP_TABLE[0].m2_shift = 12; + table->AVFSGB_VDROOP_TABLE[1].m1 = PP_HOST_TO_SMC_UL(avfs_params.ulAVFSGB_FUSE_TABLE_CKSOFF_m1); + table->AVFSGB_VDROOP_TABLE[1].m2 = PP_HOST_TO_SMC_US(avfs_params.usAVFSGB_FUSE_TABLE_CKSOFF_m2); + table->AVFSGB_VDROOP_TABLE[1].b = PP_HOST_TO_SMC_UL(avfs_params.ulAVFSGB_FUSE_TABLE_CKSOFF_b); + table->AVFSGB_VDROOP_TABLE[1].m1_shift = 24; + table->AVFSGB_VDROOP_TABLE[1].m2_shift = 12; + table->MaxVoltage = PP_HOST_TO_SMC_US(avfs_params.usMaxVoltage_0_25mv); + AVFS_meanNsigma.Aconstant[0] = PP_HOST_TO_SMC_UL(avfs_params.ulAVFS_meanNsigma_Acontant0); + AVFS_meanNsigma.Aconstant[1] = PP_HOST_TO_SMC_UL(avfs_params.ulAVFS_meanNsigma_Acontant1); + AVFS_meanNsigma.Aconstant[2] = PP_HOST_TO_SMC_UL(avfs_params.ulAVFS_meanNsigma_Acontant2); + AVFS_meanNsigma.DC_tol_sigma = PP_HOST_TO_SMC_US(avfs_params.usAVFS_meanNsigma_DC_tol_sigma); + AVFS_meanNsigma.Platform_mean = PP_HOST_TO_SMC_US(avfs_params.usAVFS_meanNsigma_Platform_mean); + AVFS_meanNsigma.PSM_Age_CompFactor = PP_HOST_TO_SMC_US(avfs_params.usPSM_Age_ComFactor); + AVFS_meanNsigma.Platform_sigma = PP_HOST_TO_SMC_US(avfs_params.usAVFS_meanNsigma_Platform_sigma); + + for (i = 0; i < NUM_VFT_COLUMNS; i++) { + AVFS_meanNsigma.Static_Voltage_Offset[i] = (uint8_t)(sclk_table->entries[i].cks_voffset * 100 / 625); + AVFS_SclkOffset.Sclk_Offset[i] = PP_HOST_TO_SMC_US((uint16_t)(sclk_table->entries[i].sclk_offset) / 100); + } + + result = polaris10_read_smc_sram_dword(smumgr, + SMU7_FIRMWARE_HEADER_LOCATION + offsetof(SMU74_Firmware_Header, AvfsMeanNSigma), + &tmp, data->sram_end); + + polaris10_copy_bytes_to_smc(smumgr, + tmp, + (uint8_t *)&AVFS_meanNsigma, + sizeof(AVFS_meanNsigma_t), + data->sram_end); + + result = polaris10_read_smc_sram_dword(smumgr, + SMU7_FIRMWARE_HEADER_LOCATION + offsetof(SMU74_Firmware_Header, AvfsSclkOffsetTable), + &tmp, data->sram_end); + polaris10_copy_bytes_to_smc(smumgr, + tmp, + (uint8_t *)&AVFS_SclkOffset, + sizeof(AVFS_Sclk_Offset_t), + data->sram_end); + + data->avfs_vdroop_override_setting = (avfs_params.ucEnableGB_VDROOP_TABLE_CKSON << BTCGB0_Vdroop_Enable_SHIFT) | + (avfs_params.ucEnableGB_VDROOP_TABLE_CKSOFF << BTCGB1_Vdroop_Enable_SHIFT) | + (avfs_params.ucEnableGB_FUSE_TABLE_CKSON << AVFSGB0_Vdroop_Enable_SHIFT) | + (avfs_params.ucEnableGB_FUSE_TABLE_CKSOFF << AVFSGB1_Vdroop_Enable_SHIFT); + data->apply_avfs_cks_off_voltage = (avfs_params.ucEnableApplyAVFS_CKS_OFF_Voltage == 1) ? true : false; + } + return result; +} + + /** * Initializes the SMC table and uploads it * @@ -2055,6 +2138,10 @@ static int polaris10_init_smc_table(struct pp_hwmgr *hwmgr) "Failed to populate Clock Stretcher Data Table!", return result); } + + result = polaris10_populate_avfs_parameters(hwmgr); + PP_ASSERT_WITH_CODE(0 == result, "Failed to populate AVFS Parameters!", return result;); + table->CurrSclkPllRange = 0xff; table->GraphicsVoltageChangeEnable = 1; table->GraphicsThermThrottleEnable = 1; @@ -2277,7 +2364,6 @@ static int polaris10_enable_sclk_mclk_dpm(struct pp_hwmgr *hwmgr) "Failed to enable MCLK DPM during DPM Start Function!", return -1); - PHM_WRITE_FIELD(hwmgr->device, MC_SEQ_CNTL_3, CAC_EN, 0x1); cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixLCAC_MC0_CNTL, 0x5); diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h index beedf35cbfa6..d717789441f5 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h @@ -312,6 +312,9 @@ struct polaris10_hwmgr { /* soft pptable for re-uploading into smu */ void *soft_pp_table; + + uint32_t avfs_vdroop_override_setting; + bool apply_avfs_cks_off_voltage; }; /* To convert to Q8.8 format for firmware */ diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_thermal.c index aba167f7d167..b206632d4650 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_thermal.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_thermal.c @@ -625,10 +625,14 @@ static int tf_polaris10_thermal_avfs_enable(struct pp_hwmgr *hwmgr, int ret; struct pp_smumgr *smumgr = (struct pp_smumgr *)(hwmgr->smumgr); struct polaris10_smumgr *smu_data = (struct polaris10_smumgr *)(smumgr->backend); + struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); - if (smu_data->avfs.avfs_btc_status != AVFS_BTC_ENABLEAVFS) + if (smu_data->avfs.avfs_btc_status == AVFS_BTC_NOTSUPPORTED) return 0; + ret = smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, + PPSMC_MSG_SetGBDroopSettings, data->avfs_vdroop_override_setting); + ret = (smum_send_msg_to_smc(smumgr, PPSMC_MSG_EnableAvfs) == 0) ? 0 : -1; diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c index da9f5f1b6dc2..bf4e18fd3872 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c @@ -1302,3 +1302,46 @@ int atomctrl_get_smc_sclk_range_table(struct pp_hwmgr *hwmgr, struct pp_atom_ctr return 0; } + +int atomctrl_get_avfs_information(struct pp_hwmgr *hwmgr, struct pp_atom_ctrl__avfs_parameters *param) +{ + ATOM_ASIC_PROFILING_INFO_V3_6 *profile = NULL; + + if (param == NULL) + return -EINVAL; + + profile = (ATOM_ASIC_PROFILING_INFO_V3_6 *) + cgs_atom_get_data_table(hwmgr->device, + GetIndexIntoMasterTable(DATA, ASIC_ProfilingInfo), + NULL, NULL, NULL); + if (!profile) + return -1; + + param->ulAVFS_meanNsigma_Acontant0 = profile->ulAVFS_meanNsigma_Acontant0; + param->ulAVFS_meanNsigma_Acontant1 = profile->ulAVFS_meanNsigma_Acontant1; + param->ulAVFS_meanNsigma_Acontant2 = profile->ulAVFS_meanNsigma_Acontant2; + param->usAVFS_meanNsigma_DC_tol_sigma = profile->usAVFS_meanNsigma_DC_tol_sigma; + param->usAVFS_meanNsigma_Platform_mean = profile->usAVFS_meanNsigma_Platform_mean; + param->usAVFS_meanNsigma_Platform_sigma = profile->usAVFS_meanNsigma_Platform_sigma; + param->ulGB_VDROOP_TABLE_CKSOFF_a0 = profile->ulGB_VDROOP_TABLE_CKSOFF_a0; + param->ulGB_VDROOP_TABLE_CKSOFF_a1 = profile->ulGB_VDROOP_TABLE_CKSOFF_a1; + param->ulGB_VDROOP_TABLE_CKSOFF_a2 = profile->ulGB_VDROOP_TABLE_CKSOFF_a2; + param->ulGB_VDROOP_TABLE_CKSON_a0 = profile->ulGB_VDROOP_TABLE_CKSON_a0; + param->ulGB_VDROOP_TABLE_CKSON_a1 = profile->ulGB_VDROOP_TABLE_CKSON_a1; + param->ulGB_VDROOP_TABLE_CKSON_a2 = profile->ulGB_VDROOP_TABLE_CKSON_a2; + param->ulAVFSGB_FUSE_TABLE_CKSOFF_m1 = profile->ulAVFSGB_FUSE_TABLE_CKSOFF_m1; + param->usAVFSGB_FUSE_TABLE_CKSOFF_m2 = profile->usAVFSGB_FUSE_TABLE_CKSOFF_m2; + param->ulAVFSGB_FUSE_TABLE_CKSOFF_b = profile->ulAVFSGB_FUSE_TABLE_CKSOFF_b; + param->ulAVFSGB_FUSE_TABLE_CKSON_m1 = profile->ulAVFSGB_FUSE_TABLE_CKSON_m1; + param->usAVFSGB_FUSE_TABLE_CKSON_m2 = profile->usAVFSGB_FUSE_TABLE_CKSON_m2; + param->ulAVFSGB_FUSE_TABLE_CKSON_b = profile->ulAVFSGB_FUSE_TABLE_CKSON_b; + param->usMaxVoltage_0_25mv = profile->usMaxVoltage_0_25mv; + param->ucEnableGB_VDROOP_TABLE_CKSOFF = profile->ucEnableGB_VDROOP_TABLE_CKSOFF; + param->ucEnableGB_VDROOP_TABLE_CKSON = profile->ucEnableGB_VDROOP_TABLE_CKSON; + param->ucEnableGB_FUSE_TABLE_CKSOFF = profile->ucEnableGB_FUSE_TABLE_CKSOFF; + param->ucEnableGB_FUSE_TABLE_CKSON = profile->ucEnableGB_FUSE_TABLE_CKSON; + param->usPSM_Age_ComFactor = profile->usPSM_Age_ComFactor; + param->ucEnableApplyAVFS_CKS_OFF_Voltage = profile->ucEnableApplyAVFS_CKS_OFF_Voltage; + + return 0; +} diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.h b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.h index d24ebb566905..248c5db5f380 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.h @@ -250,6 +250,35 @@ struct pp_atomctrl_gpio_pin_assignment { }; typedef struct pp_atomctrl_gpio_pin_assignment pp_atomctrl_gpio_pin_assignment; +struct pp_atom_ctrl__avfs_parameters { + uint32_t ulAVFS_meanNsigma_Acontant0; + uint32_t ulAVFS_meanNsigma_Acontant1; + uint32_t ulAVFS_meanNsigma_Acontant2; + uint16_t usAVFS_meanNsigma_DC_tol_sigma; + uint16_t usAVFS_meanNsigma_Platform_mean; + uint16_t usAVFS_meanNsigma_Platform_sigma; + uint32_t ulGB_VDROOP_TABLE_CKSOFF_a0; + uint32_t ulGB_VDROOP_TABLE_CKSOFF_a1; + uint32_t ulGB_VDROOP_TABLE_CKSOFF_a2; + uint32_t ulGB_VDROOP_TABLE_CKSON_a0; + uint32_t ulGB_VDROOP_TABLE_CKSON_a1; + uint32_t ulGB_VDROOP_TABLE_CKSON_a2; + uint32_t ulAVFSGB_FUSE_TABLE_CKSOFF_m1; + uint16_t usAVFSGB_FUSE_TABLE_CKSOFF_m2; + uint32_t ulAVFSGB_FUSE_TABLE_CKSOFF_b; + uint32_t ulAVFSGB_FUSE_TABLE_CKSON_m1; + uint16_t usAVFSGB_FUSE_TABLE_CKSON_m2; + uint32_t ulAVFSGB_FUSE_TABLE_CKSON_b; + uint16_t usMaxVoltage_0_25mv; + uint8_t ucEnableGB_VDROOP_TABLE_CKSOFF; + uint8_t ucEnableGB_VDROOP_TABLE_CKSON; + uint8_t ucEnableGB_FUSE_TABLE_CKSOFF; + uint8_t ucEnableGB_FUSE_TABLE_CKSON; + uint16_t usPSM_Age_ComFactor; + uint8_t ucEnableApplyAVFS_CKS_OFF_Voltage; + uint8_t ucReserved; +}; + extern bool atomctrl_get_pp_assign_pin(struct pp_hwmgr *hwmgr, const uint32_t pinId, pp_atomctrl_gpio_pin_assignment *gpio_pin_assignment); extern int atomctrl_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type, uint32_t sclk, uint16_t virtual_voltage_Id, uint16_t *voltage); extern uint32_t atomctrl_get_mpll_reference_clock(struct pp_hwmgr *hwmgr); @@ -278,5 +307,8 @@ extern int atomctrl_set_ac_timing_ai(struct pp_hwmgr *hwmgr, uint32_t memory_clo extern int atomctrl_get_voltage_evv_on_sclk_ai(struct pp_hwmgr *hwmgr, uint8_t voltage_type, uint32_t sclk, uint16_t virtual_voltage_Id, uint16_t *voltage); extern int atomctrl_get_smc_sclk_range_table(struct pp_hwmgr *hwmgr, struct pp_atom_ctrl_sclk_range_table *table); + +extern int atomctrl_get_avfs_information(struct pp_hwmgr *hwmgr, struct pp_atom_ctrl__avfs_parameters *param); + #endif diff --git a/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h b/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h index 0c6a413eaa5b..d41d37ab5b7c 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h +++ b/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h @@ -27,6 +27,7 @@ #pragma pack(push, 1) +#define PPSMC_MSG_SetGBDroopSettings ((uint16_t) 0x305) #define PPSMC_SWSTATE_FLAG_DC 0x01 #define PPSMC_SWSTATE_FLAG_UVD 0x02 diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c index 043b6ac09d5f..5dba7c509710 100644 --- a/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c +++ b/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c @@ -52,19 +52,18 @@ static const SMU74_Discrete_GraphicsLevel avfs_graphics_level_polaris10[8] = { /* Min pcie DeepSleep Activity CgSpll CgSpll CcPwr CcPwr Sclk Enabled Enabled Voltage Power */ /* Voltage, DpmLevel, DivId, Level, FuncCntl3, FuncCntl4, DynRm, DynRm1 Did, Padding,ForActivity, ForThrottle, UpHyst, DownHyst, DownHyst, Throttle */ - { 0x3c0fd047, 0x00, 0x03, 0x1e00, 0x00200410, 0x87020000, 0, 0, 0x16, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0x30750000, 0, 0, 0, 0, 0, 0, 0 } }, - { 0xa00fd047, 0x01, 0x04, 0x1e00, 0x00800510, 0x87020000, 0, 0, 0x16, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0x409c0000, 0, 0, 0, 0, 0, 0, 0 } }, - { 0x0410d047, 0x01, 0x00, 0x1e00, 0x00600410, 0x87020000, 0, 0, 0x0e, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0x50c30000, 0, 0, 0, 0, 0, 0, 0 } }, - { 0x6810d047, 0x01, 0x00, 0x1e00, 0x00800410, 0x87020000, 0, 0, 0x0c, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0x60ea0000, 0, 0, 0, 0, 0, 0, 0 } }, - { 0xcc10d047, 0x01, 0x00, 0x1e00, 0x00e00410, 0x87020000, 0, 0, 0x0c, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0xe8fd0000, 0, 0, 0, 0, 0, 0, 0 } }, - { 0x3011d047, 0x01, 0x00, 0x1e00, 0x00400510, 0x87020000, 0, 0, 0x0c, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0x70110100, 0, 0, 0, 0, 0, 0, 0 } }, - { 0x9411d047, 0x01, 0x00, 0x1e00, 0x00a00510, 0x87020000, 0, 0, 0x0c, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0xf8240100, 0, 0, 0, 0, 0, 0, 0 } }, - { 0xf811d047, 0x01, 0x00, 0x1e00, 0x00000610, 0x87020000, 0, 0, 0x0c, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0x80380100, 0, 0, 0, 0, 0, 0, 0 } } + { 0x100ea446, 0x00, 0x03, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x30750000, 0x3000, 0, 0x2600, 0, 0, 0x0004, 0x8f02, 0xffff, 0x2f00, 0x300e, 0x2700 } }, + { 0x400ea446, 0x01, 0x04, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x409c0000, 0x2000, 0, 0x1e00, 1, 1, 0x0004, 0x8300, 0xffff, 0x1f00, 0xcb5e, 0x1a00 } }, + { 0x740ea446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x50c30000, 0x2800, 0, 0x2000, 1, 1, 0x0004, 0x0c02, 0xffff, 0x2700, 0x6433, 0x2100 } }, + { 0xa40ea446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x60ea0000, 0x3000, 0, 0x2600, 1, 1, 0x0004, 0x8f02, 0xffff, 0x2f00, 0x300e, 0x2700 } }, + { 0xd80ea446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x70110100, 0x3800, 0, 0x2c00, 1, 1, 0x0004, 0x1203, 0xffff, 0x3600, 0xc9e2, 0x2e00 } }, + { 0x3c0fa446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x80380100, 0x2000, 0, 0x1e00, 2, 1, 0x0004, 0x8300, 0xffff, 0x1f00, 0xcb5e, 0x1a00 } }, + { 0x6c0fa446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x905f0100, 0x2400, 0, 0x1e00, 2, 1, 0x0004, 0x8901, 0xffff, 0x2300, 0x314c, 0x1d00 } }, + { 0xa00fa446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0xa0860100, 0x2800, 0, 0x2000, 2, 1, 0x0004, 0x0c02, 0xffff, 0x2700, 0x6433, 0x2100 } } }; static const SMU74_Discrete_MemoryLevel avfs_memory_level_polaris10 = - {0x50140000, 0x50140000, 0x00320000, 0x00, 0x00, - 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x0000, 0x00, 0x00}; + {0x100ea446, 0, 0x30750000, 0x01, 0x01, 0x01, 0x00, 0x00, 0x64, 0x00, 0x00, 0x1f00, 0x00, 0x00}; /** * Set the address for reading/writing the SMC SRAM space. @@ -219,6 +218,18 @@ bool polaris10_is_smc_ram_running(struct pp_smumgr *smumgr) && (0x20100 <= cgs_read_ind_register(smumgr->device, CGS_IND_REG__SMC, ixSMC_PC_C))); } +static bool polaris10_is_hw_avfs_present(struct pp_smumgr *smumgr) +{ + uint32_t efuse; + + efuse = cgs_read_ind_register(smumgr->device, CGS_IND_REG__SMC, ixSMU_EFUSE_0 + (49*4)); + efuse &= 0x00000001; + if (efuse) + return true; + + return false; +} + /** * Send a message to the SMC, and wait for its response. * @@ -228,21 +239,27 @@ bool polaris10_is_smc_ram_running(struct pp_smumgr *smumgr) */ int polaris10_send_msg_to_smc(struct pp_smumgr *smumgr, uint16_t msg) { + int ret; + if (!polaris10_is_smc_ram_running(smumgr)) return -1; + SMUM_WAIT_FIELD_UNEQUAL(smumgr, SMC_RESP_0, SMC_RESP, 0); - if (1 != SMUM_READ_FIELD(smumgr->device, SMC_RESP_0, SMC_RESP)) - printk("Failed to send Previous Message.\n"); + ret = SMUM_READ_FIELD(smumgr->device, SMC_RESP_0, SMC_RESP); + if (ret != 1) + printk("\n failed to send pre message %x ret is %d \n", msg, ret); cgs_write_register(smumgr->device, mmSMC_MESSAGE_0, msg); SMUM_WAIT_FIELD_UNEQUAL(smumgr, SMC_RESP_0, SMC_RESP, 0); - if (1 != SMUM_READ_FIELD(smumgr->device, SMC_RESP_0, SMC_RESP)) - printk("Failed to send Message.\n"); + ret = SMUM_READ_FIELD(smumgr->device, SMC_RESP_0, SMC_RESP); + + if (ret != 1) + printk("\n failed to send message %x ret is %d \n", msg, ret); return 0; } @@ -953,6 +970,11 @@ static int polaris10_smu_init(struct pp_smumgr *smumgr) (cgs_handle_t)smu_data->smu_buffer.handle); return -1;); + if (polaris10_is_hw_avfs_present(smumgr)) + smu_data->avfs.avfs_btc_status = AVFS_BTC_BOOT; + else + smu_data->avfs.avfs_btc_status = AVFS_BTC_NOTSUPPORTED; + return 0; } -- cgit v1.2.3 From 92d1576859577b94eafaea9b64f78ab99fe20a78 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 7 Jun 2016 14:09:56 +0800 Subject: drm/amdgpu/gfx8: update golden setting for polaris10 Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 9f6f8669edc3..1a5cbaff1e34 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -297,7 +297,8 @@ static const u32 polaris11_golden_common_all[] = static const u32 golden_settings_polaris10_a11[] = { mmATC_MISC_CG, 0x000c0fc0, 0x000c0200, - mmCB_HW_CONTROL, 0xfffdf3cf, 0x00006208, + mmCB_HW_CONTROL, 0xfffdf3cf, 0x00007208, + mmCB_HW_CONTROL_2, 0, 0x0f000000, mmCB_HW_CONTROL_3, 0x000001ff, 0x00000040, mmDB_DEBUG2, 0xf00fffff, 0x00000400, mmPA_SC_ENHANCE, 0xffffffff, 0x20000001, -- cgit v1.2.3 From 270d013659ddab52a6fd0eacae452c422d08aa39 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 7 Jun 2016 18:39:06 +0800 Subject: drm/amd/powerplay: enable clock stretch feature for polaris Power saving feature which reduces the amount of voltage needed for specific engine clocks. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 120 ++++----------------- 1 file changed, 23 insertions(+), 97 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index f730ec8b529d..64ee78f7d41e 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -1759,12 +1759,9 @@ static int polaris10_populate_smc_initailial_state(struct pp_hwmgr *hwmgr) static int polaris10_populate_clock_stretcher_data_table(struct pp_hwmgr *hwmgr) { - uint32_t ro, efuse, efuse2, clock_freq, volt_without_cks, - volt_with_cks, value; - uint16_t clock_freq_u16; + uint32_t ro, efuse, volt_without_cks, volt_with_cks, value, max, min; struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); - uint8_t type, i, j, cks_setting, stretch_amount, stretch_amount2, - volt_offset = 0; + uint8_t i, stretch_amount, stretch_amount2, volt_offset = 0; struct phm_ppt_v1_information *table_info = (struct phm_ppt_v1_information *)(hwmgr->pptable); struct phm_ppt_v1_clock_voltage_dependency_table *sclk_table = @@ -1776,50 +1773,38 @@ static int polaris10_populate_clock_stretcher_data_table(struct pp_hwmgr *hwmgr) * if the part is SS or FF. if RO >= 1660MHz, part is FF. */ efuse = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, - ixSMU_EFUSE_0 + (146 * 4)); - efuse2 = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, - ixSMU_EFUSE_0 + (148 * 4)); + ixSMU_EFUSE_0 + (67 * 4)); efuse &= 0xFF000000; efuse = efuse >> 24; - efuse2 &= 0xF; - if (efuse2 == 1) - ro = (2300 - 1350) * efuse / 255 + 1350; - else - ro = (2500 - 1000) * efuse / 255 + 1000; - - if (ro >= 1660) - type = 0; - else - type = 1; + if (hwmgr->chip_id == CHIP_POLARIS10) { + min = 1000; + max = 2300; + } else { + min = 1100; + max = 2100; + } - /* Populate Stretch amount */ - data->smc_state_table.ClockStretcherAmount = stretch_amount; + ro = efuse * (max -min)/255 + min; /* Populate Sclk_CKS_masterEn0_7 and Sclk_voltageOffset */ for (i = 0; i < sclk_table->count; i++) { data->smc_state_table.Sclk_CKS_masterEn0_7 |= sclk_table->entries[i].cks_enable << i; - volt_without_cks = (uint32_t)((14041 * - (sclk_table->entries[i].clk/100) / 10000 + 3571 + 75 - ro) * 1000 / - (4026 - (13924 * (sclk_table->entries[i].clk/100) / 10000))); - volt_with_cks = (uint32_t)((13946 * - (sclk_table->entries[i].clk/100) / 10000 + 3320 + 45 - ro) * 1000 / - (3664 - (11454 * (sclk_table->entries[i].clk/100) / 10000))); + + volt_without_cks = (uint32_t)(((ro - 40) * 1000 - 2753594 - sclk_table->entries[i].clk/100 * 136418 /1000) / \ + (sclk_table->entries[i].clk/100 * 1132925 /10000 - 242418)/100); + + volt_with_cks = (uint32_t)((ro * 1000 -2396351 - sclk_table->entries[i].clk/100 * 329021/1000) / \ + (sclk_table->entries[i].clk/10000 * 649434 /1000 - 18005)/10); + if (volt_without_cks >= volt_with_cks) volt_offset = (uint8_t)(((volt_without_cks - volt_with_cks + sclk_table->entries[i].cks_voffset) * 100 / 625) + 1); + data->smc_state_table.Sclk_voltageOffset[i] = volt_offset; } - PHM_WRITE_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, PWR_CKS_ENABLE, - STRETCH_ENABLE, 0x0); - PHM_WRITE_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, PWR_CKS_ENABLE, - masterReset, 0x1); - /* PHM_WRITE_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, PWR_CKS_ENABLE, staticEnable, 0x1); */ - PHM_WRITE_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, PWR_CKS_ENABLE, - masterReset, 0x0); - /* Populate CKS Lookup Table */ if (stretch_amount == 1 || stretch_amount == 2 || stretch_amount == 5) stretch_amount2 = 0; @@ -1833,69 +1818,6 @@ static int polaris10_populate_clock_stretcher_data_table(struct pp_hwmgr *hwmgr) return -EINVAL); } - value = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, - ixPWR_CKS_CNTL); - value &= 0xFFC2FF87; - data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].minFreq = - polaris10_clock_stretcher_lookup_table[stretch_amount2][0]; - data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].maxFreq = - polaris10_clock_stretcher_lookup_table[stretch_amount2][1]; - clock_freq_u16 = (uint16_t)(PP_SMC_TO_HOST_UL(data->smc_state_table. - GraphicsLevel[data->smc_state_table.GraphicsDpmLevelCount - 1].SclkSetting.SclkFrequency) / 100); - if (polaris10_clock_stretcher_lookup_table[stretch_amount2][0] < clock_freq_u16 - && polaris10_clock_stretcher_lookup_table[stretch_amount2][1] > clock_freq_u16) { - /* Program PWR_CKS_CNTL. CKS_USE_FOR_LOW_FREQ */ - value |= (polaris10_clock_stretcher_lookup_table[stretch_amount2][3]) << 16; - /* Program PWR_CKS_CNTL. CKS_LDO_REFSEL */ - value |= (polaris10_clock_stretcher_lookup_table[stretch_amount2][2]) << 18; - /* Program PWR_CKS_CNTL. CKS_STRETCH_AMOUNT */ - value |= (polaris10_clock_stretch_amount_conversion - [polaris10_clock_stretcher_lookup_table[stretch_amount2][3]] - [stretch_amount]) << 3; - } - CONVERT_FROM_HOST_TO_SMC_US(data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].minFreq); - CONVERT_FROM_HOST_TO_SMC_US(data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].maxFreq); - data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].setting = - polaris10_clock_stretcher_lookup_table[stretch_amount2][2] & 0x7F; - data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].setting |= - (polaris10_clock_stretcher_lookup_table[stretch_amount2][3]) << 7; - - cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, - ixPWR_CKS_CNTL, value); - - /* Populate DDT Lookup Table */ - for (i = 0; i < 4; i++) { - /* Assign the minimum and maximum VID stored - * in the last row of Clock Stretcher Voltage Table. - */ - data->smc_state_table.ClockStretcherDataTable.ClockStretcherDataTableEntry[i].minVID = - (uint8_t) polaris10_clock_stretcher_ddt_table[type][i][2]; - data->smc_state_table.ClockStretcherDataTable.ClockStretcherDataTableEntry[i].maxVID = - (uint8_t) polaris10_clock_stretcher_ddt_table[type][i][3]; - /* Loop through each SCLK and check the frequency - * to see if it lies within the frequency for clock stretcher. - */ - for (j = 0; j < data->smc_state_table.GraphicsDpmLevelCount; j++) { - cks_setting = 0; - clock_freq = PP_SMC_TO_HOST_UL( - data->smc_state_table.GraphicsLevel[j].SclkSetting.SclkFrequency); - /* Check the allowed frequency against the sclk level[j]. - * Sclk's endianness has already been converted, - * and it's in 10Khz unit, - * as opposed to Data table, which is in Mhz unit. - */ - if (clock_freq >= (polaris10_clock_stretcher_ddt_table[type][i][0]) * 100) { - cks_setting |= 0x2; - if (clock_freq < (polaris10_clock_stretcher_ddt_table[type][i][1]) * 100) - cks_setting |= 0x1; - } - data->smc_state_table.ClockStretcherDataTable.ClockStretcherDataTableEntry[i].setting - |= cks_setting << (j * 2); - } - CONVERT_FROM_HOST_TO_SMC_US( - data->smc_state_table.ClockStretcherDataTable.ClockStretcherDataTableEntry[i].setting); - } - value = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixPWR_CKS_CNTL); value &= 0xFFFFFFFE; cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixPWR_CKS_CNTL, value); @@ -3062,6 +2984,10 @@ int polaris10_hwmgr_backend_init(struct pp_hwmgr *hwmgr) data->vddci_control = POLARIS10_VOLTAGE_CONTROL_BY_SVID2; } + if (table_info->cac_dtp_table->usClockStretchAmount != 0) + phm_cap_set(hwmgr->platform_descriptor.platformCaps, + PHM_PlatformCaps_ClockStretcher); + polaris10_set_features_platform_caps(hwmgr); polaris10_init_dpm_defaults(hwmgr); -- cgit v1.2.3 From 34511dce4b35685d3988d5c8b100d11a068db5bd Mon Sep 17 00:00:00 2001 From: Mika Kahola Date: Mon, 20 Jun 2016 11:10:26 +0300 Subject: drm/i915: Revert DisplayPort fast link training feature It has been found out that in some HW combination the DisplayPort fast link training feature caused screen flickering. Let's revert this feature for now until we can ensure that the feature works for all platforms. This is a manual revert of commits 5fa836a9d859 ("drm/i915: DP link training optimization") and 4e96c97742f4 ("drm/i915: eDP link training optimization"). Fixes: 5fa836a9d859 ("drm/i915: DP link training optimization") Fixes: 4e96c97742f4 ("drm/i915: eDP link training optimization") Cc: # v4.2+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91393 Reviewed-by: Jani Nikula Signed-off-by: Mika Kahola Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1466410226-19543-1-git-send-email-mika.kahola@intel.com (cherry picked from commit 91df09d92ad82c8778ca218097bf827f154292ca) --- drivers/gpu/drm/i915/intel_dp.c | 3 --- drivers/gpu/drm/i915/intel_dp_link_training.c | 26 ++------------------------ drivers/gpu/drm/i915/intel_drv.h | 2 -- 3 files changed, 2 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index ffe5f8430957..79cf2d5f5a20 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4977,9 +4977,6 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) intel_display_power_get(dev_priv, power_domain); if (long_hpd) { - /* indicate that we need to restart link training */ - intel_dp->train_set_valid = false; - intel_dp_long_pulse(intel_dp->attached_connector); if (intel_dp->is_mst) ret = IRQ_HANDLED; diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c b/drivers/gpu/drm/i915/intel_dp_link_training.c index 0b8eefc2acc5..60fb39cd220b 100644 --- a/drivers/gpu/drm/i915/intel_dp_link_training.c +++ b/drivers/gpu/drm/i915/intel_dp_link_training.c @@ -85,8 +85,7 @@ static bool intel_dp_reset_link_train(struct intel_dp *intel_dp, uint8_t dp_train_pat) { - if (!intel_dp->train_set_valid) - memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set)); + memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set)); intel_dp_set_signal_levels(intel_dp); return intel_dp_set_link_train(intel_dp, dp_train_pat); } @@ -161,23 +160,6 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp) break; } - /* - * if we used previously trained voltage and pre-emphasis values - * and we don't get clock recovery, reset link training values - */ - if (intel_dp->train_set_valid) { - DRM_DEBUG_KMS("clock recovery not ok, reset"); - /* clear the flag as we are not reusing train set */ - intel_dp->train_set_valid = false; - if (!intel_dp_reset_link_train(intel_dp, - DP_TRAINING_PATTERN_1 | - DP_LINK_SCRAMBLING_DISABLE)) { - DRM_ERROR("failed to enable link training\n"); - return; - } - continue; - } - /* Check to see if we've tried the max voltage */ for (i = 0; i < intel_dp->lane_count; i++) if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) @@ -284,7 +266,6 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp) /* Make sure clock is still ok */ if (!drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) { - intel_dp->train_set_valid = false; intel_dp_link_training_clock_recovery(intel_dp); intel_dp_set_link_train(intel_dp, training_pattern | @@ -301,7 +282,6 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp) /* Try 5 times, then try clock recovery if that fails */ if (tries > 5) { - intel_dp->train_set_valid = false; intel_dp_link_training_clock_recovery(intel_dp); intel_dp_set_link_train(intel_dp, training_pattern | @@ -322,10 +302,8 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp) intel_dp_set_idle_link_train(intel_dp); - if (channel_eq) { - intel_dp->train_set_valid = true; + if (channel_eq) DRM_DEBUG_KMS("Channel EQ done. DP Training successful\n"); - } } void intel_dp_stop_link_train(struct intel_dp *intel_dp) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 4a24b0067a3a..f7f0f01814f6 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -863,8 +863,6 @@ struct intel_dp { /* This is called before a link training is starterd */ void (*prepare_link_retrain)(struct intel_dp *intel_dp); - bool train_set_valid; - /* Displayport compliance testing */ unsigned long compliance_test_type; unsigned long compliance_test_data; -- cgit v1.2.3 From 1e3fa0acfec677e915d7de5ac6e1f18cfa4f805b Mon Sep 17 00:00:00 2001 From: Lyude Date: Thu, 9 Jun 2016 11:58:15 -0400 Subject: drm/i915/fbc: Disable on HSW by default for now >From https://bugs.freedesktop.org/show_bug.cgi?id=96461 : This was kind of a difficult bug to track down. If you're using a Haswell system running GNOME and you have fbc completely enabled and working, playing videos can result in video artifacts. Steps to reproduce: - Run GNOME - Ensure FBC is enabled and active - Download a movie, I used the ogg version of Big Buck Bunny for this - Run `gst-launch-1.0 filesrc location='some_movie.ogg' ! decodebin ! glimagesink` in a terminal - Watch for about over a minute, you'll see small horizontal lines go down the screen. For the time being, disable FBC for Haswell by default. Stefan Richter reported kernel freezes (no video artifacts) when fbc is on. (E3-1245 v3 with HD P4600; openbox and some KDE and LXDE applications, thread begins at https://lkml.org/lkml/2016/4/26/813). We also got reports from Steven Honeyman on openbox+roxterm. v2 (From Paulo): - Add extra information to the commit message - Add Fixes tag - Rebase Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96461 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96464 Fixes: a98ee79317b4 ("drm/i915/fbc: enable FBC by default on HSW and BDW") Cc: stable@vger.kernel.org Reviewed-by: Paulo Zanoni Signed-off-by: Lyude Signed-off-by: Paulo Zanoni Link: http://patchwork.freedesktop.org/patch/msgid/1465487895-7401-1-git-send-email-cpaul@redhat.com (cherry picked from commit c7f7e2feffb0294302041507dfd5fc15f01afccc) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_fbc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_fbc.c b/drivers/gpu/drm/i915/intel_fbc.c index d5a7cfec589b..647127f3aaff 100644 --- a/drivers/gpu/drm/i915/intel_fbc.c +++ b/drivers/gpu/drm/i915/intel_fbc.c @@ -824,8 +824,7 @@ static bool intel_fbc_can_choose(struct intel_crtc *crtc) { struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; struct intel_fbc *fbc = &dev_priv->fbc; - bool enable_by_default = IS_HASWELL(dev_priv) || - IS_BROADWELL(dev_priv); + bool enable_by_default = IS_BROADWELL(dev_priv); if (intel_vgpu_active(dev_priv->dev)) { fbc->no_fbc_reason = "VGPU is active"; -- cgit v1.2.3 From 2f38b1b16d9280689e5cfa47a4c50956bf437f0d Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Tue, 21 Jun 2016 12:34:15 +0800 Subject: ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading The new module-level code (MLC) approach invokes MLC on the per-table basis, but the dynamic loading support of this is incorrect because of the lock order: acpi_ns_evaluate acpi_ex_enter_intperter acpi_ns_load_table (triggered by Load opcode) acpi_ns_exec_module_code_list acpi_ex_enter_intperter The regression is introduced by the following commit: Commit: 2785ce8d0da1cac9d8f78615e116cf929e9a9123 ACPICA Commit: 071eff738c59eda1792ac24b3b688b61691d7e7c Subject: ACPICA: Add per-table execution of module-level code This patch fixes this regression by unlocking the interpreter lock before invoking MLC. However, the unlocking is done to the acpi_ns_load_table(), in which the interpreter lock should be locked by acpi_ns_parse_table() but it wasn't. Fixes: 2785ce8d0da1 (ACPICA: Add per-table execution of module-level code) Reported-by: Mika Westerberg Tested-by: Mika Westerberg Signed-off-by: Lv Zheng Cc: 4.5+ # 4.5+ [ rjw : Subject ] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/exconfig.c | 2 ++ drivers/acpi/acpica/nsparse.c | 9 +++++++-- 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c index a1d177d58254..21932d640a41 100644 --- a/drivers/acpi/acpica/exconfig.c +++ b/drivers/acpi/acpica/exconfig.c @@ -108,7 +108,9 @@ acpi_ex_add_table(u32 table_index, /* Add the table to the namespace */ + acpi_ex_exit_interpreter(); status = acpi_ns_load_table(table_index, parent_node); + acpi_ex_enter_interpreter(); if (ACPI_FAILURE(status)) { acpi_ut_remove_reference(obj_desc); *ddb_handle = NULL; diff --git a/drivers/acpi/acpica/nsparse.c b/drivers/acpi/acpica/nsparse.c index f631a47724f0..1783cd7e1446 100644 --- a/drivers/acpi/acpica/nsparse.c +++ b/drivers/acpi/acpica/nsparse.c @@ -47,6 +47,7 @@ #include "acparser.h" #include "acdispat.h" #include "actables.h" +#include "acinterp.h" #define _COMPONENT ACPI_NAMESPACE ACPI_MODULE_NAME("nsparse") @@ -170,6 +171,8 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) ACPI_FUNCTION_TRACE(ns_parse_table); + acpi_ex_enter_interpreter(); + /* * AML Parse, pass 1 * @@ -185,7 +188,7 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS1, table_index, start_node); if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); + goto error_exit; } /* @@ -201,8 +204,10 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS2, table_index, start_node); if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); + goto error_exit; } +error_exit: + acpi_ex_exit_interpreter(); return_ACPI_STATUS(status); } -- cgit v1.2.3 From 3e1d7fb0d279fea19eb4e36cc9bddf89264ba03f Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Fri, 2 Oct 2015 12:39:23 +0900 Subject: PM / devfreq: devm_kzalloc to have dev pointer more precisely devm_kzalloc of devfreq's statistics data structure has been using its parent device as the dev allocated for. If a device's devfreq is disabled in run-time, such allocated memory won't be freed. Desginating more precisely with the devfreq device pointer fixes the issue. Signed-off-by: MyungJoo Ham --- drivers/devfreq/devfreq.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 1d6c803804d5..380173738a1d 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -561,15 +561,6 @@ struct devfreq *devfreq_add_device(struct device *dev, mutex_lock(&devfreq->lock); } - devfreq->trans_table = devm_kzalloc(dev, sizeof(unsigned int) * - devfreq->profile->max_state * - devfreq->profile->max_state, - GFP_KERNEL); - devfreq->time_in_state = devm_kzalloc(dev, sizeof(unsigned long) * - devfreq->profile->max_state, - GFP_KERNEL); - devfreq->last_stat_updated = jiffies; - dev_set_name(&devfreq->dev, "%s", dev_name(dev)); err = device_register(&devfreq->dev); if (err) { @@ -578,6 +569,15 @@ struct devfreq *devfreq_add_device(struct device *dev, goto err_out; } + devfreq->trans_table = devm_kzalloc(&devfreq->dev, sizeof(unsigned int) * + devfreq->profile->max_state * + devfreq->profile->max_state, + GFP_KERNEL); + devfreq->time_in_state = devm_kzalloc(&devfreq->dev, sizeof(unsigned long) * + devfreq->profile->max_state, + GFP_KERNEL); + devfreq->last_stat_updated = jiffies; + srcu_init_notifier_head(&devfreq->transition_notifier_list); mutex_unlock(&devfreq->lock); -- cgit v1.2.3 From ac4b281176a54d17dd3f91b7fb4a4656471d8730 Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Fri, 2 Oct 2015 12:48:54 +0900 Subject: PM / devfreq: fix duplicated kfree on devfreq pointer device_unregister() calls kfree already. Signed-off-by: MyungJoo Ham --- drivers/devfreq/devfreq.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 380173738a1d..6f33c1e89a14 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -603,7 +603,6 @@ struct devfreq *devfreq_add_device(struct device *dev, err_init: list_del(&devfreq->node); device_unregister(&devfreq->dev); - kfree(devfreq); err_out: return ERR_PTR(err); } -- cgit v1.2.3 From a5e9b937fa91b3f404618b5281c3239bd1f09c7b Mon Sep 17 00:00:00 2001 From: Cai Zhiyong Date: Sat, 14 May 2016 14:13:30 +0800 Subject: PM / devfreq: fix double call put_device 1295 */ 1296 void device_unregister(struct device *dev) 1297 { 1298 pr_debug("device: '%s': %s\n", dev_name(dev), __func__); 1299 device_del(dev); 1300 put_device(dev); 1301 } 1302 EXPORT_SYMBOL_GPL(device_unregister); 1303 device_unregister is called put_device, there is no need to call put_device(&devfreq->dev) again. Signed-off-by: Cai Zhiyong Reviewed-by: Chanwoo Choi Signed-off-by: MyungJoo Ham --- drivers/devfreq/devfreq.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 6f33c1e89a14..3e1afb4ac77c 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -620,7 +620,6 @@ int devfreq_remove_device(struct devfreq *devfreq) return -EINVAL; device_unregister(&devfreq->dev); - put_device(&devfreq->dev); return 0; } -- cgit v1.2.3 From 67ffdb529b4ec9833f73947dec01eaa78dd53c3d Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Mon, 16 May 2016 11:41:57 +0900 Subject: PM / devfreq: remove double put_device When device_register() returns with error, it has already done put_device() on the input device pointer. Signed-off-by: MyungJoo Ham --- drivers/devfreq/devfreq.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 3e1afb4ac77c..0ebd64dfc0a9 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -564,7 +564,6 @@ struct devfreq *devfreq_add_device(struct device *dev, dev_set_name(&devfreq->dev, "%s", dev_name(dev)); err = device_register(&devfreq->dev); if (err) { - put_device(&devfreq->dev); mutex_unlock(&devfreq->lock); goto err_out; } -- cgit v1.2.3 From 674789dd2c4b53ed368dc81ae22d72ac4fdb92ec Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 26 May 2016 09:45:42 +0300 Subject: PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check Smatch complains because platform_get_resource() returns NULL on error and not an error pointer so the check is wrong. Julia Lawall pointed out that normally we don't check these, because devm_ioremap_resource() has a check for NULL. Signed-off-by: Dan Carpenter Reviewed-by: Julia Lawall Signed-off-by: MyungJoo Ham --- drivers/devfreq/event/exynos-nocp.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/devfreq/event/exynos-nocp.c b/drivers/devfreq/event/exynos-nocp.c index 6b6a5f310486..a5841403bde8 100644 --- a/drivers/devfreq/event/exynos-nocp.c +++ b/drivers/devfreq/event/exynos-nocp.c @@ -220,9 +220,6 @@ static int exynos_nocp_parse_dt(struct platform_device *pdev, /* Maps the memory mapped IO to control nocp register */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (IS_ERR(res)) - return PTR_ERR(res); - base = devm_ioremap_resource(dev, res); if (IS_ERR(base)) return PTR_ERR(base); -- cgit v1.2.3 From 8d39fc085d268a56486066a3deca94745f804f2d Mon Sep 17 00:00:00 2001 From: Lukasz Luba Date: Tue, 31 May 2016 11:25:09 +0100 Subject: PM / devfreq: fix initialization of current frequency in last status Some systems need current frequency from last_status for calculation but it is zeroed during initialization. When the device starts there is no history, but we can assume that the last frequency was the same as the initial frequency (which is also used in 'previous_freq'). The log shows the result of this misinterpreted value. [ 2.042847] ... Failed to get voltage for frequency 0: -34 Signed-off-by: Lukasz Luba Reviewed-by: Javi Merino Signed-off-by: MyungJoo Ham --- drivers/devfreq/devfreq.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 0ebd64dfc0a9..c7f47e34807b 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -552,6 +552,7 @@ struct devfreq *devfreq_add_device(struct device *dev, devfreq->profile = profile; strncpy(devfreq->governor_name, governor_name, DEVFREQ_NAME_LEN); devfreq->previous_freq = profile->initial_freq; + devfreq->last_status.current_frequency = profile->initial_freq; devfreq->data = data; devfreq->nb.notifier_call = devfreq_notifier_call; -- cgit v1.2.3 From 04e59a0211ff012ba60c00baca673482570784e9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 18 Jun 2016 11:31:33 +0200 Subject: phy-sun4i-usb: Fix irq free conditions to match request conditions commit 5cf700ac9d50 ("phy: phy-sun4i-usb: Fix optional gpios failing probe") changed the condition under which irqs are requested, but omitted matching changes to sun4i_usb_phy_remove(). This commit fixes this. Fixes: 5cf700ac9d50 ("phy: phy-sun4i-usb: Fix optional gpios failing probe") Signed-off-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-sun4i-usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 739029430dda..de3101fbbf40 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -514,9 +514,9 @@ static int sun4i_usb_phy_remove(struct platform_device *pdev) if (data->vbus_power_nb_registered) power_supply_unreg_notifier(&data->vbus_power_nb); - if (data->id_det_irq >= 0) + if (data->id_det_irq > 0) devm_free_irq(dev, data->id_det_irq, data); - if (data->vbus_det_irq >= 0) + if (data->vbus_det_irq > 0) devm_free_irq(dev, data->vbus_det_irq, data); cancel_delayed_work_sync(&data->detect); -- cgit v1.2.3 From ba562d5e54fd3136bfea0457add3675850247774 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 1 Jun 2016 22:21:53 +0300 Subject: pinctrl: imx: Do not treat a PIN without MUX register as an error Some PINs do not have a MUX register, it is not an error. It is necessary to allow the continuation of the PINs configuration, otherwise the whole PIN-group will be configured incorrectly. Cc: stable@vger.kernel.org Signed-off-by: Alexander Shiyan Signed-off-by: Linus Walleij --- drivers/pinctrl/freescale/pinctrl-imx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c index 47ccfcc8a647..eccb47480e1d 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx.c +++ b/drivers/pinctrl/freescale/pinctrl-imx.c @@ -209,9 +209,9 @@ static int imx_pmx_set(struct pinctrl_dev *pctldev, unsigned selector, pin_reg = &info->pin_regs[pin_id]; if (pin_reg->mux_reg == -1) { - dev_err(ipctl->dev, "Pin(%s) does not support mux function\n", + dev_dbg(ipctl->dev, "Pin(%s) does not support mux function\n", info->pins[pin_id].name); - return -EINVAL; + continue; } if (info->flags & SHARE_MUX_CONF_REG) { -- cgit v1.2.3 From 0ac3c0a4025f41748a083bdd4970cb3ede802b15 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 14:17:06 -0700 Subject: pinctrl: single: Fix missing flush of posted write for a wakeirq With many repeated suspend resume cycles, the pin specific wakeirq may not always work on omaps. This is because the write to enable the pin interrupt may not have reached the device over the interconnect before suspend happens. Let's fix the issue with a flush of posted write with a readback. Cc: stable@vger.kernel.org Reported-by: Nishanth Menon Signed-off-by: Tony Lindgren Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-single.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index cf9bafa10acf..bfdf720db270 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -1580,6 +1580,9 @@ static inline void pcs_irq_set(struct pcs_soc_data *pcs_soc, else mask &= ~soc_mask; pcs->write(mask, pcswi->reg); + + /* flush posted write */ + mask = pcs->read(pcswi->reg); raw_spin_unlock(&pcs->lock); } -- cgit v1.2.3 From 9ee8ff4867d07a6429991a0b748fa9c1586a7764 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 6 Jun 2016 18:56:27 +0200 Subject: gpio: tegra: Make lockdep class file-scoped Commit b546be0db955 ("gpio: tegra: Get rid of all file scoped global variables") moved all file scoped variables into the driver-private structure to allow potentially multiple instances of the driver. The change also included turning the lockdep class into a driver-private field, which doesn't work and produces error messages such as this: [ 0.142310] BUG: key ffff8000fb3f7ab0 not in .data! Make the lockdep class file-scoped again to fix this issue. Signed-off-by: Thierry Reding Signed-off-by: Linus Walleij --- drivers/gpio/gpio-tegra.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index ec891a27952f..661b0e34e067 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -98,7 +98,6 @@ struct tegra_gpio_info { const struct tegra_gpio_soc_config *soc; struct gpio_chip gc; struct irq_chip ic; - struct lock_class_key lock_class; u32 bank_count; }; @@ -547,6 +546,12 @@ static const struct dev_pm_ops tegra_gpio_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(tegra_gpio_suspend, tegra_gpio_resume) }; +/* + * This lock class tells lockdep that GPIO irqs are in a different category + * than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; + static int tegra_gpio_probe(struct platform_device *pdev) { const struct tegra_gpio_soc_config *config; @@ -660,7 +665,7 @@ static int tegra_gpio_probe(struct platform_device *pdev) bank = &tgi->bank_info[GPIO_BANK(gpio)]; - irq_set_lockdep_class(irq, &tgi->lock_class); + irq_set_lockdep_class(irq, &gpio_lock_class); irq_set_chip_data(irq, bank); irq_set_chip_and_handler(irq, &tgi->ic, handle_simple_irq); } -- cgit v1.2.3 From 19b5a91764fddcc51b2f8e54a81d4ef231980181 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 4 Jun 2016 14:35:56 +0800 Subject: pinctrl: tegra: Fix build dependency I got below build error: ERROR: "tegra_xusb_padctl_legacy_probe" [drivers/phy/tegra/phy-tegra-xusb.ko] undefined! with below build configuration: CONFIG_ARCH_TEGRA=y CONFIG_PINCTRL_TEGRA_XUSB=y CONFIG_PHY_TEGRA_XUSB=y The problem is below line in drivers/pinctrl/Makefile obj-$(CONFIG_PINCTRL_TEGRA) += tegra/ So even CONFIG_PINCTRL_TEGRA_XUSB=y is set, kbuild still does not compile the code in drivers/pinctrl/tegra folder if !CONFIG_PINCTRL_TEGRA. phy-tegra-xusb.c does not use any symbol from pinctrl-tegra.c, so build pinctrl-tegra.c only when CONFIG_PINCTRL_TEGRA is set. Signed-off-by: Axel Lin Acked-by: Jon Hunter Signed-off-by: Linus Walleij --- drivers/pinctrl/Makefile | 2 +- drivers/pinctrl/tegra/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index e4bc1151e04f..42a5c1dddfef 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -23,7 +23,7 @@ obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o obj-$(CONFIG_PINCTRL_SIRF) += sirf/ -obj-$(CONFIG_PINCTRL_TEGRA) += tegra/ +obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_PINCTRL_TZ1090) += pinctrl-tz1090.o obj-$(CONFIG_PINCTRL_TZ1090_PDC) += pinctrl-tz1090-pdc.o obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o diff --git a/drivers/pinctrl/tegra/Makefile b/drivers/pinctrl/tegra/Makefile index a927379b6794..d9ea2be69cc4 100644 --- a/drivers/pinctrl/tegra/Makefile +++ b/drivers/pinctrl/tegra/Makefile @@ -1,4 +1,4 @@ -obj-y += pinctrl-tegra.o +obj-$(CONFIG_PINCTRL_TEGRA) += pinctrl-tegra.o obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o obj-$(CONFIG_PINCTRL_TEGRA114) += pinctrl-tegra114.o -- cgit v1.2.3 From 942f64c4c2be19a1b4a0c4295182b42d153899bf Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Mon, 20 Jun 2016 11:53:20 +0300 Subject: team: Fix possible deadlock during team enslave Both dev_uc_sync_multiple() and dev_mc_sync_multiple() require the source device to be locked by netif_addr_lock_bh(), but this is missing in team's enslave function, so add it. This fixes the following lockdep warning: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(_xmit_ETHER/1); local_irq_disable(); lock(&(&mc->mca_lock)->rlock); lock(&team_netdev_addr_lock_key); lock(&(&mc->mca_lock)->rlock); *** DEADLOCK *** Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port") Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/team/team.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 2ace126533cd..fdee77207323 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1203,8 +1203,10 @@ static int team_port_add(struct team *team, struct net_device *port_dev) goto err_dev_open; } + netif_addr_lock_bh(dev); dev_uc_sync_multiple(port_dev, dev); dev_mc_sync_multiple(port_dev, dev); + netif_addr_unlock_bh(dev); err = vlan_vids_add_by_dev(port_dev, dev); if (err) { -- cgit v1.2.3 From 93c098af09455ea7bdc6f0f6b08f6ac14fa06cf4 Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Tue, 21 Jun 2016 14:20:02 +0300 Subject: net/mlx4_en: Fix the return value of a failure in VLAN VID add/kill Modify mlx4_en_vlan_rx_[add/kill]_vid to return error value in case of failure. Fixes: 8e586137e6b6 ('net: make vlan ndo_vlan_rx_[add/kill]_vid return error value') Signed-off-by: Kamal Heib Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index a2c25365a8a3..43f505e2d291 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -406,14 +406,18 @@ static int mlx4_en_vlan_rx_add_vid(struct net_device *dev, mutex_lock(&mdev->state_lock); if (mdev->device_up && priv->port_up) { err = mlx4_SET_VLAN_FLTR(mdev->dev, priv); - if (err) + if (err) { en_err(priv, "Failed configuring VLAN filter\n"); + goto out; + } } - if (mlx4_register_vlan(mdev->dev, priv->port, vid, &idx)) - en_dbg(HW, priv, "failed adding vlan %d\n", vid); - mutex_unlock(&mdev->state_lock); + err = mlx4_register_vlan(mdev->dev, priv->port, vid, &idx); + if (err) + en_dbg(HW, priv, "Failed adding vlan %d\n", vid); - return 0; +out: + mutex_unlock(&mdev->state_lock); + return err; } static int mlx4_en_vlan_rx_kill_vid(struct net_device *dev, @@ -421,7 +425,7 @@ static int mlx4_en_vlan_rx_kill_vid(struct net_device *dev, { struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; - int err; + int err = 0; en_dbg(HW, priv, "Killing VID:%d\n", vid); @@ -438,7 +442,7 @@ static int mlx4_en_vlan_rx_kill_vid(struct net_device *dev, } mutex_unlock(&mdev->state_lock); - return 0; + return err; } static void mlx4_en_u64_to_mac(unsigned char dst_mac[ETH_ALEN + 2], u64 src_mac) -- cgit v1.2.3 From 9d76931180557270796f9631e2c79b9c7bb3c9fb Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Tue, 21 Jun 2016 14:20:03 +0300 Subject: net/mlx4_en: Avoid unregister_netdev at shutdown flow This allows a clean shutdown, even if some netdev clients do not release their reference from this netdev. It is enough to release the HW resources only as the kernel is shutting down. Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Eran Ben Elisha Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 17 +++++++++++++++-- drivers/net/ethernet/mellanox/mlx4/main.c | 5 ++++- include/linux/mlx4/device.h | 1 + 3 files changed, 20 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 43f505e2d291..0c0dfd6cdca6 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2036,11 +2036,20 @@ err: return -ENOMEM; } +static void mlx4_en_shutdown(struct net_device *dev) +{ + rtnl_lock(); + netif_device_detach(dev); + mlx4_en_close(dev); + rtnl_unlock(); +} void mlx4_en_destroy_netdev(struct net_device *dev) { struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; + bool shutdown = mdev->dev->persist->interface_state & + MLX4_INTERFACE_STATE_SHUTDOWN; en_dbg(DRV, priv, "Destroying netdev on port:%d\n", priv->port); @@ -2048,7 +2057,10 @@ void mlx4_en_destroy_netdev(struct net_device *dev) if (priv->registered) { devlink_port_type_clear(mlx4_get_devlink_port(mdev->dev, priv->port)); - unregister_netdev(dev); + if (shutdown) + mlx4_en_shutdown(dev); + else + unregister_netdev(dev); } if (priv->allocated) @@ -2073,7 +2085,8 @@ void mlx4_en_destroy_netdev(struct net_device *dev) kfree(priv->tx_ring); kfree(priv->tx_cq); - free_netdev(dev); + if (!shutdown) + free_netdev(dev); } static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu) diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 372ebfa880f5..546fab0ecc3b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -4135,8 +4135,11 @@ static void mlx4_shutdown(struct pci_dev *pdev) mlx4_info(persist->dev, "mlx4_shutdown was called\n"); mutex_lock(&persist->interface_state_mutex); - if (persist->interface_state & MLX4_INTERFACE_STATE_UP) + if (persist->interface_state & MLX4_INTERFACE_STATE_UP) { + /* Notify mlx4 clients that the kernel is being shut down */ + persist->interface_state |= MLX4_INTERFACE_STATE_SHUTDOWN; mlx4_unload_one(pdev); + } mutex_unlock(&persist->interface_state_mutex); } diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 80dec87a94f8..d46a0e7f144d 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -466,6 +466,7 @@ enum { enum { MLX4_INTERFACE_STATE_UP = 1 << 0, MLX4_INTERFACE_STATE_DELETION = 1 << 1, + MLX4_INTERFACE_STATE_SHUTDOWN = 1 << 2, }; #define MSTR_SM_CHANGE_MASK (MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK | \ -- cgit v1.2.3 From 0b305ccc1b545d3389068ddc3548cbc877513b97 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 13 Jun 2016 13:48:53 +0800 Subject: gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock Fixes: 9ae482104cb9 ("gpio: 104-idi-48: Clear pending interrupt once in IRQ handler") Signed-off-by: Axel Lin Acked-by: William Breathitt Gray Signed-off-by: Linus Walleij --- drivers/gpio/gpio-104-idi-48.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c index 6c75c83baf5a..2d2763ea1a68 100644 --- a/drivers/gpio/gpio-104-idi-48.c +++ b/drivers/gpio/gpio-104-idi-48.c @@ -247,6 +247,7 @@ static int idi_48_probe(struct device *dev, unsigned int id) idi48gpio->irq = irq[id]; spin_lock_init(&idi48gpio->lock); + spin_lock_init(&idi48gpio->ack_lock); dev_set_drvdata(dev, idi48gpio); -- cgit v1.2.3 From 39243ee771666e02201ba89c1d76fdc28e9cf681 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 15 Jun 2016 22:57:38 +0200 Subject: gpio: make sure gpiod_to_irq() returns negative on NULL desc commit 54d77198fdfbc4f0fe11b4252c1d9c97d51a3264 ("gpio: bail out silently on NULL descriptors") doesn't work for gpiod_to_irq(): drivers assume that NULL descriptors will give negative IRQ numbers in return. It has been pointed out that returning 0 is NO_IRQ and that drivers should be amended to treat this as an error, but that is for the longer term: now let us repair the semantics. Cc: Maxime Ripard Reported-by: Hans de Goede Tested-by: Hans de Goede Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 58d822d7e8da..f39bf05993e7 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2056,7 +2056,14 @@ int gpiod_to_irq(const struct gpio_desc *desc) struct gpio_chip *chip; int offset; - VALIDATE_DESC(desc); + /* + * Cannot VALIDATE_DESC() here as gpiod_to_irq() consumer semantics + * requires this function to not return zero on an invalid descriptor + * but rather a negative error number. + */ + if (!desc || !desc->gdev || !desc->gdev->chip) + return -EINVAL; + chip = desc->gdev->chip; offset = gpio_chip_hwgpio(desc); if (chip->to_irq) { -- cgit v1.2.3 From c0a1ecb9f4e208f4b75d88fa9669748e3fd705ab Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 16 Jun 2016 11:55:55 +0200 Subject: gpio: make library immune to error pointers Most functions that take a GPIO descriptor in need to check the descriptor for IS_ERR(). We do this mostly in the VALIDATE_DESC() macro except for the gpiod_to_irq() function which needs special handling. Cc: stable@vger.kernel.org Reported-by: Grygorii Strashko Reviewed-by: Grygorii Strashko Acked-by: Alexandre Courbot Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index f39bf05993e7..570771ed19e6 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1373,8 +1373,12 @@ done: #define VALIDATE_DESC(desc) do { \ if (!desc) \ return 0; \ + if (IS_ERR(desc)) { \ + pr_warn("%s: invalid GPIO (errorpointer)\n", __func__); \ + return PTR_ERR(desc); \ + } \ if (!desc->gdev) { \ - pr_warn("%s: invalid GPIO\n", __func__); \ + pr_warn("%s: invalid GPIO (no device)\n", __func__); \ return -EINVAL; \ } \ if ( !desc->gdev->chip ) { \ @@ -1386,8 +1390,12 @@ done: #define VALIDATE_DESC_VOID(desc) do { \ if (!desc) \ return; \ + if (IS_ERR(desc)) { \ + pr_warn("%s: invalid GPIO (errorpointer)\n", __func__); \ + return; \ + } \ if (!desc->gdev) { \ - pr_warn("%s: invalid GPIO\n", __func__); \ + pr_warn("%s: invalid GPIO (no device)\n", __func__); \ return; \ } \ if (!desc->gdev->chip) { \ @@ -2061,7 +2069,7 @@ int gpiod_to_irq(const struct gpio_desc *desc) * requires this function to not return zero on an invalid descriptor * but rather a negative error number. */ - if (!desc || !desc->gdev || !desc->gdev->chip) + if (!desc || IS_ERR(desc) || !desc->gdev || !desc->gdev->chip) return -EINVAL; chip = desc->gdev->chip; -- cgit v1.2.3 From 972228d87445dc46c0a01f5f3de673ac017626f7 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Tue, 21 Jun 2016 00:31:50 +0200 Subject: ubi: Make recover_peb power cut aware MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit recover_peb() was never power cut aware, if a power cut happened right after writing the VID header upon next attach UBI would blindly use the new partial written PEB and all data from the old PEB is lost. In order to make recover_peb() power cut aware, write the new VID with a proper crc and copy_flag set such that the UBI attach process will detect whether the new PEB is completely written or not. We cannot directly use ubi_eba_atomic_leb_change() since we'd have to unlock the LEB which is facing a write error. Cc: stable@vger.kernel.org Reported-by: Jörg Pfähler Reviewed-by: Jörg Pfähler Signed-off-by: Richard Weinberger --- drivers/mtd/ubi/eba.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index 5780dd1ba79d..ebf517271d29 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -575,6 +575,7 @@ static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum, int err, idx = vol_id2idx(ubi, vol_id), new_pnum, data_size, tries = 0; struct ubi_volume *vol = ubi->volumes[idx]; struct ubi_vid_hdr *vid_hdr; + uint32_t crc; vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS); if (!vid_hdr) @@ -599,14 +600,8 @@ retry: goto out_put; } - vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi)); - err = ubi_io_write_vid_hdr(ubi, new_pnum, vid_hdr); - if (err) { - up_read(&ubi->fm_eba_sem); - goto write_error; - } + ubi_assert(vid_hdr->vol_type == UBI_VID_DYNAMIC); - data_size = offset + len; mutex_lock(&ubi->buf_mutex); memset(ubi->peb_buf + offset, 0xFF, len); @@ -621,6 +616,19 @@ retry: memcpy(ubi->peb_buf + offset, buf, len); + data_size = offset + len; + crc = crc32(UBI_CRC32_INIT, ubi->peb_buf, data_size); + vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi)); + vid_hdr->copy_flag = 1; + vid_hdr->data_size = cpu_to_be32(data_size); + vid_hdr->data_crc = cpu_to_be32(crc); + err = ubi_io_write_vid_hdr(ubi, new_pnum, vid_hdr); + if (err) { + mutex_unlock(&ubi->buf_mutex); + up_read(&ubi->fm_eba_sem); + goto write_error; + } + err = ubi_io_write_data(ubi, ubi->peb_buf, new_pnum, 0, data_size); if (err) { mutex_unlock(&ubi->buf_mutex); -- cgit v1.2.3 From bce271f255dae8335dc4d2ee2c4531e09cc67f5a Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Tue, 21 Jun 2016 12:14:07 +0200 Subject: can: fix handling of unmodifiable configuration options fix With upstream commit bb208f144cf3f59 (can: fix handling of unmodifiable configuration options) a new can_validate() function was introduced. When invoking 'ip link set can0 type can' without any configuration data can_validate() tries to validate the content without taking into account that there's totally no content. This patch adds a check for missing content. Reported-by: ajneu Signed-off-by: Oliver Hartkopp Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/dev.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 910c12e2638e..348dd5001fa4 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -798,6 +798,9 @@ static int can_validate(struct nlattr *tb[], struct nlattr *data[]) * - control mode with CAN_CTRLMODE_FD set */ + if (!data) + return 0; + if (data[IFLA_CAN_CTRLMODE]) { struct can_ctrlmode *cm = nla_data(data[IFLA_CAN_CTRLMODE]); -- cgit v1.2.3 From 25e1ed6e64f52a692ba3191c4fde650aab3ecc07 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Tue, 21 Jun 2016 15:45:47 +0200 Subject: can: fix oops caused by wrong rtnl dellink usage For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created nor removed with the ip tool ... This patch adds a private dellink function for the CAN device driver interface that does just nothing. It's a follow up to commit 993e6f2fd ("can: fix oops caused by wrong rtnl newlink usage") but for dellink. Reported-by: ajneu Signed-off-by: Oliver Hartkopp Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/dev.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 348dd5001fa4..ad535a854e5c 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -1011,6 +1011,11 @@ static int can_newlink(struct net *src_net, struct net_device *dev, return -EOPNOTSUPP; } +static void can_dellink(struct net_device *dev, struct list_head *head) +{ + return; +} + static struct rtnl_link_ops can_link_ops __read_mostly = { .kind = "can", .maxtype = IFLA_CAN_MAX, @@ -1019,6 +1024,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = { .validate = can_validate, .newlink = can_newlink, .changelink = can_changelink, + .dellink = can_dellink, .get_size = can_get_size, .fill_info = can_fill_info, .get_xstats_size = can_get_xstats_size, -- cgit v1.2.3 From b41aa4f8476545e2b663b1549759a8c3a66f47b0 Mon Sep 17 00:00:00 2001 From: Cristina Ciocan Date: Wed, 22 Jun 2016 14:17:19 +0300 Subject: pinctrl: baytrail: Fix mingled clock pins Fix plt clock 3, 4 and 5 pins, which were not in the proper order. Signed-off-by: Cristina Ciocan Acked-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-baytrail.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c index 677a811b3a6f..7abfd42e8ffd 100644 --- a/drivers/pinctrl/intel/pinctrl-baytrail.c +++ b/drivers/pinctrl/intel/pinctrl-baytrail.c @@ -401,9 +401,9 @@ static const struct byt_simple_func_mux byt_score_sata_mux[] = { static const unsigned int byt_score_plt_clk0_pins[] = { 96 }; static const unsigned int byt_score_plt_clk1_pins[] = { 97 }; static const unsigned int byt_score_plt_clk2_pins[] = { 98 }; -static const unsigned int byt_score_plt_clk4_pins[] = { 99 }; -static const unsigned int byt_score_plt_clk5_pins[] = { 100 }; -static const unsigned int byt_score_plt_clk3_pins[] = { 101 }; +static const unsigned int byt_score_plt_clk3_pins[] = { 99 }; +static const unsigned int byt_score_plt_clk4_pins[] = { 100 }; +static const unsigned int byt_score_plt_clk5_pins[] = { 101 }; static const struct byt_simple_func_mux byt_score_plt_clk_mux[] = { SIMPLE_FUNC("plt_clk", 1), }; -- cgit v1.2.3 From 71873a9b38d1cc6c93e2962149a7bb7272a7cb66 Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Thu, 23 Jun 2016 07:57:21 +0200 Subject: can: kvaser_usb: Add support for more Kvaser Leaf v2 devices This patch adds support for Kvaser Leaf Light HS v2 OEM, Mini PCI Express 2xHS and USBcan Light 2xHS. Signed-off-by: Jimmy Assarsson Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/Kconfig | 2 ++ drivers/net/can/usb/kvaser_usb.c | 8 +++++++- 2 files changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index 2ff0df32b3d1..8483a40e7e9e 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -47,6 +47,8 @@ config CAN_KVASER_USB - Kvaser USBcan R - Kvaser Leaf Light v2 - Kvaser Mini PCI Express HS + - Kvaser Mini PCI Express 2xHS + - Kvaser USBcan Light 2xHS - Kvaser USBcan II HS/HS - Kvaser USBcan II HS/LS - Kvaser USBcan Rugged ("USBcan Rev B") diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c index 022bfa13ebfa..6f1f3b675ff5 100644 --- a/drivers/net/can/usb/kvaser_usb.c +++ b/drivers/net/can/usb/kvaser_usb.c @@ -59,11 +59,14 @@ #define USB_CAN_R_PRODUCT_ID 39 #define USB_LEAF_LITE_V2_PRODUCT_ID 288 #define USB_MINI_PCIE_HS_PRODUCT_ID 289 +#define USB_LEAF_LIGHT_HS_V2_OEM_PRODUCT_ID 290 +#define USB_USBCAN_LIGHT_2HS_PRODUCT_ID 291 +#define USB_MINI_PCIE_2HS_PRODUCT_ID 292 static inline bool kvaser_is_leaf(const struct usb_device_id *id) { return id->idProduct >= USB_LEAF_DEVEL_PRODUCT_ID && - id->idProduct <= USB_MINI_PCIE_HS_PRODUCT_ID; + id->idProduct <= USB_MINI_PCIE_2HS_PRODUCT_ID; } /* Kvaser USBCan-II devices */ @@ -537,6 +540,9 @@ static const struct usb_device_id kvaser_usb_table[] = { .driver_info = KVASER_HAS_TXRX_ERRORS }, { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_V2_PRODUCT_ID) }, { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_HS_PRODUCT_ID) }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_HS_V2_OEM_PRODUCT_ID) }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_LIGHT_2HS_PRODUCT_ID) }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_2HS_PRODUCT_ID) }, /* USBCANII family IDs */ { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN2_PRODUCT_ID), -- cgit v1.2.3 From 842775f1509054ea969f1787f38d6a0ec2ccfaba Mon Sep 17 00:00:00 2001 From: Ross Lagerwall Date: Tue, 10 May 2016 10:27:54 +0100 Subject: xen/balloon: Fix declared-but-not-defined warning Fix a declared-but-not-defined warning when building with XEN_BALLOON_MEMORY_HOTPLUG=n. This fixes a regression introduced by commit dfd74a1edfab ("xen/balloon: Fix crash when ballooning on x86 32 bit PAE"). Signed-off-by: Ross Lagerwall Acked-by: Juergen Gross Signed-off-by: David Vrabel --- drivers/xen/balloon.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index d46839f51e73..e4db19e88ab1 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -151,8 +151,6 @@ static DECLARE_WAIT_QUEUE_HEAD(balloon_wq); static void balloon_process(struct work_struct *work); static DECLARE_DELAYED_WORK(balloon_worker, balloon_process); -static void release_memory_resource(struct resource *resource); - /* When ballooning out (allocating memory to return to Xen) we don't really want the kernel to try too hard since that can trigger the oom killer. */ #define GFP_BALLOON \ @@ -248,6 +246,19 @@ static enum bp_state update_schedule(enum bp_state state) } #ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG +static void release_memory_resource(struct resource *resource) +{ + if (!resource) + return; + + /* + * No need to reset region to identity mapped since we now + * know that no I/O can be in this region + */ + release_resource(resource); + kfree(resource); +} + static struct resource *additional_memory_resource(phys_addr_t size) { struct resource *res; @@ -286,19 +297,6 @@ static struct resource *additional_memory_resource(phys_addr_t size) return res; } -static void release_memory_resource(struct resource *resource) -{ - if (!resource) - return; - - /* - * No need to reset region to identity mapped since we now - * know that no I/O can be in this region - */ - release_resource(resource); - kfree(resource); -} - static enum bp_state reserve_additional_memory(void) { long credit; -- cgit v1.2.3 From 02ef871ecac290919ea0c783d05da7eedeffc10e Mon Sep 17 00:00:00 2001 From: Andrey Grodzovsky Date: Tue, 21 Jun 2016 14:26:36 -0400 Subject: xen/pciback: Fix conf_space read/write overlap check. Current overlap check is evaluating to false a case where a filter field is fully contained (proper subset) of a r/w request. This change applies classical overlap check instead to include all the scenarios. More specifically, for (Hilscher GmbH CIFX 50E-DP(M/S)) device driver the logic is such that the entire confspace is read and written in 4 byte chunks. In this case as an example, CACHE_LINE_SIZE, LATENCY_TIMER and PCI_BIST are arriving together in one call to xen_pcibk_config_write() with offset == 0xc and size == 4. With the exsisting overlap check the LATENCY_TIMER field (offset == 0xd, length == 1) is fully contained in the write request and hence is excluded from write, which is incorrect. Signed-off-by: Andrey Grodzovsky Reviewed-by: Boris Ostrovsky Reviewed-by: Jan Beulich Cc: Signed-off-by: David Vrabel --- drivers/xen/xen-pciback/conf_space.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/xen-pciback/conf_space.c b/drivers/xen/xen-pciback/conf_space.c index 8e67336f8ddd..6a25533da237 100644 --- a/drivers/xen/xen-pciback/conf_space.c +++ b/drivers/xen/xen-pciback/conf_space.c @@ -183,8 +183,7 @@ int xen_pcibk_config_read(struct pci_dev *dev, int offset, int size, field_start = OFFSET(cfg_entry); field_end = OFFSET(cfg_entry) + field->size; - if ((req_start >= field_start && req_start < field_end) - || (req_end > field_start && req_end <= field_end)) { + if (req_end > field_start && field_end > req_start) { err = conf_space_read(dev, cfg_entry, field_start, &tmp_val); if (err) @@ -230,8 +229,7 @@ int xen_pcibk_config_write(struct pci_dev *dev, int offset, int size, u32 value) field_start = OFFSET(cfg_entry); field_end = OFFSET(cfg_entry) + field->size; - if ((req_start >= field_start && req_start < field_end) - || (req_end > field_start && req_end <= field_end)) { + if (req_end > field_start && field_end > req_start) { tmp_val = 0; err = xen_pcibk_config_read(dev, field_start, -- cgit v1.2.3 From 5ce91714b0d8c0a3ff9b858966721f508351cf4c Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Sat, 18 Jun 2016 00:54:47 +0200 Subject: hwmon: (dell-smm) Cache fan_type() calls and change fan detection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On more Dell machines (e.g. Dell Precision M3800) fan_type() call is too expensive (CPU is too long in SMM mode) and cause kernel to hang. This is bug in Dell SMM or BIOS. This patch caches type for each fan (as it should not change) and changes the way how fan presense is detected. First it try function fan_status() as was before commit f989e55452c7 ("i8k: Add support for fan labels"). And if that fails fallback to fan_type(). *_status() functions can fail in case fan is not currently accessible (e.g. present on GPU which is currently turned off). Reported-by: Tolga Cakir Signed-off-by: Pali Rohár Link: https://bugzilla.kernel.org/show_bug.cgi?id=112021 Cc: stable@vger.kernel.org # v4.0+, will need backport Tested-by: Tolga Cakir Signed-off-by: Guenter Roeck --- drivers/hwmon/dell-smm-hwmon.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c index 4bbc58714868..2ac87d553e22 100644 --- a/drivers/hwmon/dell-smm-hwmon.c +++ b/drivers/hwmon/dell-smm-hwmon.c @@ -238,7 +238,7 @@ static int i8k_get_fan_speed(int fan) /* * Read the fan type. */ -static int i8k_get_fan_type(int fan) +static int _i8k_get_fan_type(int fan) { struct smm_regs regs = { .eax = I8K_SMM_GET_FAN_TYPE, }; @@ -249,6 +249,17 @@ static int i8k_get_fan_type(int fan) return i8k_smm(®s) ? : regs.eax & 0xff; } +static int i8k_get_fan_type(int fan) +{ + /* I8K_SMM_GET_FAN_TYPE SMM call is expensive, so cache values */ + static int types[2] = { INT_MIN, INT_MIN }; + + if (types[fan] == INT_MIN) + types[fan] = _i8k_get_fan_type(fan); + + return types[fan]; +} + /* * Read the fan nominal rpm for specific fan speed. */ @@ -782,13 +793,17 @@ static int __init i8k_init_hwmon(void) if (err >= 0) i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP4; - /* First fan attributes, if fan type is OK */ - err = i8k_get_fan_type(0); + /* First fan attributes, if fan status or type is OK */ + err = i8k_get_fan_status(0); + if (err < 0) + err = i8k_get_fan_type(0); if (err >= 0) i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN1; - /* Second fan attributes, if fan type is OK */ - err = i8k_get_fan_type(1); + /* Second fan attributes, if fan status or type is OK */ + err = i8k_get_fan_status(1); + if (err < 0) + err = i8k_get_fan_type(1); if (err >= 0) i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN2; -- cgit v1.2.3 From f336ae03149725bb5844166c7b04f7f65f17eec9 Mon Sep 17 00:00:00 2001 From: Talat Batheesh Date: Wed, 22 Jun 2016 17:27:22 +0300 Subject: IB/core: Fix no default GIDs when netdevice reregisters Currently, when the netdevice returned by get_netdev is unregistered, we delete all GIDs (including the default GIDs) and reset their attributes. Therefore, when we re-register it, no default GIDs will be assigned (as their "default GID") attribute will be reset. Fixing this by keeping "default GID" attribute. Fixes: 03db3a2d81e6 ('IB/core: Add RoCE GID table management') Signed-off-by: Talat Batheesh Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/cache.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c index 040966775f40..1a2984c28b95 100644 --- a/drivers/infiniband/core/cache.c +++ b/drivers/infiniband/core/cache.c @@ -411,7 +411,9 @@ int ib_cache_gid_del_all_netdev_gids(struct ib_device *ib_dev, u8 port, for (ix = 0; ix < table->sz; ix++) if (table->data_vec[ix].attr.ndev == ndev) - if (!del_gid(ib_dev, port, table, ix, false)) + if (!del_gid(ib_dev, port, table, ix, + !!(table->data_vec[ix].props & + GID_TABLE_ENTRY_DEFAULT))) deleted = true; write_unlock_irq(&table->rwlock); -- cgit v1.2.3 From c65f6c5a3650876a69d1041a9d3c90986e9ca233 Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Wed, 22 Jun 2016 17:27:23 +0300 Subject: IB/core: Fix RoCE v1 multicast join logic issue During multicast join of RoCEv1, IGMP join state and max hop limit were updated incorrectly. IGMP join should be sent and marked as joined only on RoCEv2 after a successful join. Max hops should be updated to the hop limit on RoCEv2 regardless of the join state. Fixes: bee3c3c91865 ('IB/cma: Join and leave multicast groups...') Signed-off-by: Alex Vesker Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/cma.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index f0c91ba3178a..dcde8706f123 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -3878,12 +3878,12 @@ static int cma_iboe_join_multicast(struct rdma_id_private *id_priv, gid_type = id_priv->cma_dev->default_gid_type[id_priv->id.port_num - rdma_start_port(id_priv->cma_dev->device)]; if (addr->sa_family == AF_INET) { - if (gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP) + if (gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP) { + mc->multicast.ib->rec.hop_limit = IPV6_DEFAULT_HOPLIMIT; err = cma_igmp_send(ndev, &mc->multicast.ib->rec.mgid, true); - if (!err) { - mc->igmp_joined = true; - mc->multicast.ib->rec.hop_limit = IPV6_DEFAULT_HOPLIMIT; + if (!err) + mc->igmp_joined = true; } } else { if (gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP) -- cgit v1.2.3 From b3556005c5f319285610e3eae88b4078e1a4d3bc Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 22 Jun 2016 17:27:24 +0300 Subject: IB/core: Fix false search of the IB_SA_WELL_KNOWN_GUID When virtualziation is supported, VFs may send SA MADs to a GID formed by the concatenation of the subnet prefix with the IB_SA_WELL_KNOWN_GUID. When a response is required, the current code will search the local HCA's port for the received GID to figure out the GID index of the entry containing this GID. However, since this is not a real GID it will not be found and error will be printed. We change the logic to check if the destination GID is this special GID and avoid lookup in this case and use GID index 0. Fixes: a0c1b2a35087 ('IB/core: Support accessing SA in virtualized environment') Signed-off-by: Eli Cohen Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/verbs.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index 1d7d4cf442e3..6298f54b4137 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -511,12 +511,16 @@ int ib_init_ah_from_wc(struct ib_device *device, u8 port_num, ah_attr->grh.dgid = sgid; if (!rdma_cap_eth_ah(device, port_num)) { - ret = ib_find_cached_gid_by_port(device, &dgid, - IB_GID_TYPE_IB, - port_num, NULL, - &gid_index); - if (ret) - return ret; + if (dgid.global.interface_id != cpu_to_be64(IB_SA_WELL_KNOWN_GUID)) { + ret = ib_find_cached_gid_by_port(device, &dgid, + IB_GID_TYPE_IB, + port_num, NULL, + &gid_index); + if (ret) + return ret; + } else { + gid_index = 0; + } } ah_attr->grh.sgid_index = (u8) gid_index; -- cgit v1.2.3 From b57141c1abe41e26c09b1b1b7ece463464ba6de2 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Wed, 22 Jun 2016 17:27:25 +0300 Subject: IB/uverbs: Initialize ib_qp_init_attr with zeros Initialize ib_qp_init_attr with zeros in order to avoid from garbage in fields that won't be set with user values. Fixes: a060b5629ab06 ('IB/core: generic RDMA READ/WRITE API') Signed-off-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/uverbs_cmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 1a8babb8ee3c..825021d1008b 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -1747,7 +1747,7 @@ static int create_qp(struct ib_uverbs_file *file, struct ib_srq *srq = NULL; struct ib_qp *qp; char *buf; - struct ib_qp_init_attr attr; + struct ib_qp_init_attr attr = {}; struct ib_uverbs_ex_create_qp_resp resp; int ret; -- cgit v1.2.3 From c9b254955b9f8814966f5dabd34c39d0e0a2b437 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 22 Jun 2016 17:27:26 +0300 Subject: IB/mlx5: Fix post send fence logic If the caller specified IB_SEND_FENCE in the send flags of the work request and no previous work request stated that the successive one should be fenced, the work request would be executed without a fence. This could result in RDMA read or atomic operations failure due to a MR being invalidated. Fix this by adding the mlx5 enumeration for fencing RDMA/atomic operations and fix the logic to apply this. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/qp.c | 7 ++++--- include/linux/mlx5/qp.h | 1 + 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index ce434228a5ea..ce0a7ab35a22 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -3332,10 +3332,11 @@ static u8 get_fence(u8 fence, struct ib_send_wr *wr) return MLX5_FENCE_MODE_SMALL_AND_FENCE; else return fence; - - } else { - return 0; + } else if (unlikely(wr->send_flags & IB_SEND_FENCE)) { + return MLX5_FENCE_MODE_FENCE; } + + return 0; } static int begin_wqe(struct mlx5_ib_qp *qp, void **seg, diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h index e4e29882fdfd..630f66a186b7 100644 --- a/include/linux/mlx5/qp.h +++ b/include/linux/mlx5/qp.h @@ -172,6 +172,7 @@ enum { enum { MLX5_FENCE_MODE_NONE = 0 << 5, MLX5_FENCE_MODE_INITIATOR_SMALL = 1 << 5, + MLX5_FENCE_MODE_FENCE = 2 << 5, MLX5_FENCE_MODE_STRONG_ORDERING = 3 << 5, MLX5_FENCE_MODE_SMALL_AND_FENCE = 4 << 5, }; -- cgit v1.2.3 From 00bf534fce23048aa0e6fd8dbceedf097ee65508 Mon Sep 17 00:00:00 2001 From: Talat Batheesh Date: Wed, 22 Jun 2016 17:27:27 +0300 Subject: IB/mlx5: Fix wrong naming of port_rcv_data counter port_xmit_data is written instead of port_rcv_data. Fixes: 3efd9a11212d ('IB/mlx5: Modify MAD reading counters method to use counter registers') Signed-off-by: Talat Batheesh Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/mad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/mad.c b/drivers/infiniband/hw/mlx5/mad.c index 1534af113058..364aab9f3c9e 100644 --- a/drivers/infiniband/hw/mlx5/mad.c +++ b/drivers/infiniband/hw/mlx5/mad.c @@ -121,7 +121,7 @@ static void pma_cnt_ext_assign(struct ib_pma_portcounters_ext *pma_cnt_ext, pma_cnt_ext->port_xmit_data = cpu_to_be64(MLX5_SUM_CNT(out, transmitted_ib_unicast.octets, transmitted_ib_multicast.octets) >> 2); - pma_cnt_ext->port_xmit_data = + pma_cnt_ext->port_rcv_data = cpu_to_be64(MLX5_SUM_CNT(out, received_ib_unicast.octets, received_ib_multicast.octets) >> 2); pma_cnt_ext->port_xmit_packets = -- cgit v1.2.3 From f2940e2c76bb554a7fbdd28ca5b90904117a9e96 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Wed, 22 Jun 2016 17:27:28 +0300 Subject: IB/mlx4: Fix the SQ size of an RC QP When calculating the required size of an RC QP send queue, leave enough space for masked atomic operations, which require more space than "regular" atomic operation. Fixes: 6fa8f719844b ("IB/mlx4: Add support for masked atomic operations") Signed-off-by: Yishai Hadas Reviewed-by: Jack Morgenstein Reviewed-by: Eran Ben Elisha Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 81b0e1fbec1d..519611793f7c 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -362,7 +362,7 @@ static int send_wqe_overhead(enum mlx4_ib_qp_type type, u32 flags) sizeof (struct mlx4_wqe_raddr_seg); case MLX4_IB_QPT_RC: return sizeof (struct mlx4_wqe_ctrl_seg) + - sizeof (struct mlx4_wqe_atomic_seg) + + sizeof (struct mlx4_wqe_masked_atomic_seg) + sizeof (struct mlx4_wqe_raddr_seg); case MLX4_IB_QPT_SMI: case MLX4_IB_QPT_GSI: -- cgit v1.2.3 From a6100603a4a87fc436199362bdb81cb849faaf6e Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Wed, 22 Jun 2016 17:27:29 +0300 Subject: IB/mlx4: Fix error flow when sending mads under SRIOV Fix mad send error flow to prevent double freeing address handles, and leaking tx_ring entries when SRIOV is active. If ib_mad_post_send fails, the address handle pointer in the tx_ring entry must be set to NULL (or there will be a double-free) and tx_tail must be incremented (or there will be a leak of tx_ring entries). The tx_ring is handled the same way in the send-completion handler. Fixes: 37bfc7c1e83f ("IB/mlx4: SR-IOV multiplex and demultiplex MADs") Signed-off-by: Yishai Hadas Reviewed-by: Jack Morgenstein Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/mad.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c index d68f506c1922..9c2e53d28f98 100644 --- a/drivers/infiniband/hw/mlx4/mad.c +++ b/drivers/infiniband/hw/mlx4/mad.c @@ -527,7 +527,7 @@ int mlx4_ib_send_to_slave(struct mlx4_ib_dev *dev, int slave, u8 port, tun_tx_ix = (++tun_qp->tx_ix_head) & (MLX4_NUM_TUNNEL_BUFS - 1); spin_unlock(&tun_qp->tx_lock); if (ret) - goto out; + goto end; tun_mad = (struct mlx4_rcv_tunnel_mad *) (tun_qp->tx_ring[tun_tx_ix].buf.addr); if (tun_qp->tx_ring[tun_tx_ix].ah) @@ -596,9 +596,15 @@ int mlx4_ib_send_to_slave(struct mlx4_ib_dev *dev, int slave, u8 port, wr.wr.send_flags = IB_SEND_SIGNALED; ret = ib_post_send(src_qp, &wr.wr, &bad_wr); -out: - if (ret) - ib_destroy_ah(ah); + if (!ret) + return 0; + out: + spin_lock(&tun_qp->tx_lock); + tun_qp->tx_ix_tail++; + spin_unlock(&tun_qp->tx_lock); + tun_qp->tx_ring[tun_tx_ix].ah = NULL; +end: + ib_destroy_ah(ah); return ret; } @@ -1326,9 +1332,15 @@ int mlx4_ib_send_to_wire(struct mlx4_ib_dev *dev, int slave, u8 port, ret = ib_post_send(send_qp, &wr.wr, &bad_wr); + if (!ret) + return 0; + + spin_lock(&sqp->tx_lock); + sqp->tx_ix_tail++; + spin_unlock(&sqp->tx_lock); + sqp->tx_ring[wire_tx_ix].ah = NULL; out: - if (ret) - ib_destroy_ah(ah); + ib_destroy_ah(ah); return ret; } -- cgit v1.2.3 From 5533c18ab02b17a7f2ac11908e2d97d4b421617d Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Wed, 22 Jun 2016 17:27:30 +0300 Subject: IB/mlx4: Verify port number in flow steering create flow In procedure mlx4_ib_create_flow, passing an invalid port number will cause an out-of-bounds array access. Data passed to this procedure can come from user-space. Therefore, need to validate port number before proceeding onwards. Note that we check against the number of physical ports declared at the verbs (ib core) level; When bonding is active, the verbs level sees one physical port, even though the low-level driver sees two ports. Fixes: f77c0162a339 ("IB/mlx4: Add receive flow steering support") Signed-off-by: Yishai Hadas Reviewed-by: Jack Morgenstein Reviewed-by: Moni Shoua Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 0eb09e104542..42a46078d7d5 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -1704,6 +1704,9 @@ static struct ib_flow *mlx4_ib_create_flow(struct ib_qp *qp, struct mlx4_dev *dev = (to_mdev(qp->device))->dev; int is_bonded = mlx4_is_bonded(dev); + if (flow_attr->port < 1 || flow_attr->port > qp->device->phys_port_cnt) + return ERR_PTR(-EINVAL); + if ((flow_attr->flags & IB_FLOW_ATTR_FLAGS_DONT_TRAP) && (flow_attr->type != IB_FLOW_ATTR_NORMAL)) return ERR_PTR(-EOPNOTSUPP); -- cgit v1.2.3 From 5b420d9cf7382c6e1512e96e02d18842d272049c Mon Sep 17 00:00:00 2001 From: Dotan Barak Date: Wed, 22 Jun 2016 17:27:31 +0300 Subject: IB/mlx4: Fix memory leak if QP creation failed When RC, UC, or RAW QPs are created, a qp object is allocated (kzalloc). If at a later point (in procedure create_qp_common) the qp creation fails, this qp object must be freed. Fixes: 1ffeb2eb8be99 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Signed-off-by: Dotan Barak Signed-off-by: Jack Morgenstein Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/qp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 519611793f7c..8db8405c1e99 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1191,8 +1191,10 @@ static struct ib_qp *_mlx4_ib_create_qp(struct ib_pd *pd, { err = create_qp_common(to_mdev(pd->device), pd, init_attr, udata, 0, &qp, gfp); - if (err) + if (err) { + kfree(qp); return ERR_PTR(err); + } qp->ibqp.qp_num = qp->mqp.qpn; qp->xrcdn = xrcdn; -- cgit v1.2.3 From cbc9355a939b90263c58beb855f8151b56634c42 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Wed, 22 Jun 2016 17:27:32 +0300 Subject: IB/mlx4: Prevent cross page boundary allocation Prevent cross page boundary allocation by allocating new page, this is required to be aligned with ConnectX-3 HW requirements. Not doing that might cause to "RDMA read local protection" error. Fixes: 1b2cd0fc673c ('IB/mlx4: Support the new memory registration API') Suggested-by: Christoph Hellwig Signed-off-by: Chuck Lever Reviewed-by: Sagi Grimberg Signed-off-by: Yishai Hadas Signed-off-by: Leon Romanovsky Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/mlx4_ib.h | 2 +- drivers/infiniband/hw/mlx4/mr.c | 34 +++++++++++++++++----------------- 2 files changed, 18 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h index 6c5ac5d8f32f..29acda249612 100644 --- a/drivers/infiniband/hw/mlx4/mlx4_ib.h +++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h @@ -139,7 +139,7 @@ struct mlx4_ib_mr { u32 max_pages; struct mlx4_mr mmr; struct ib_umem *umem; - void *pages_alloc; + size_t page_map_size; }; struct mlx4_ib_mw { diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c index 631272172a0b..5d73989d9771 100644 --- a/drivers/infiniband/hw/mlx4/mr.c +++ b/drivers/infiniband/hw/mlx4/mr.c @@ -277,20 +277,23 @@ mlx4_alloc_priv_pages(struct ib_device *device, struct mlx4_ib_mr *mr, int max_pages) { - int size = max_pages * sizeof(u64); - int add_size; int ret; - add_size = max_t(int, MLX4_MR_PAGES_ALIGN - ARCH_KMALLOC_MINALIGN, 0); + /* Ensure that size is aligned to DMA cacheline + * requirements. + * max_pages is limited to MLX4_MAX_FAST_REG_PAGES + * so page_map_size will never cross PAGE_SIZE. + */ + mr->page_map_size = roundup(max_pages * sizeof(u64), + MLX4_MR_PAGES_ALIGN); - mr->pages_alloc = kzalloc(size + add_size, GFP_KERNEL); - if (!mr->pages_alloc) + /* Prevent cross page boundary allocation. */ + mr->pages = (__be64 *)get_zeroed_page(GFP_KERNEL); + if (!mr->pages) return -ENOMEM; - mr->pages = PTR_ALIGN(mr->pages_alloc, MLX4_MR_PAGES_ALIGN); - mr->page_map = dma_map_single(device->dma_device, mr->pages, - size, DMA_TO_DEVICE); + mr->page_map_size, DMA_TO_DEVICE); if (dma_mapping_error(device->dma_device, mr->page_map)) { ret = -ENOMEM; @@ -298,9 +301,9 @@ mlx4_alloc_priv_pages(struct ib_device *device, } return 0; -err: - kfree(mr->pages_alloc); +err: + free_page((unsigned long)mr->pages); return ret; } @@ -309,11 +312,10 @@ mlx4_free_priv_pages(struct mlx4_ib_mr *mr) { if (mr->pages) { struct ib_device *device = mr->ibmr.device; - int size = mr->max_pages * sizeof(u64); dma_unmap_single(device->dma_device, mr->page_map, - size, DMA_TO_DEVICE); - kfree(mr->pages_alloc); + mr->page_map_size, DMA_TO_DEVICE); + free_page((unsigned long)mr->pages); mr->pages = NULL; } } @@ -537,14 +539,12 @@ int mlx4_ib_map_mr_sg(struct ib_mr *ibmr, struct scatterlist *sg, int sg_nents, mr->npages = 0; ib_dma_sync_single_for_cpu(ibmr->device, mr->page_map, - sizeof(u64) * mr->max_pages, - DMA_TO_DEVICE); + mr->page_map_size, DMA_TO_DEVICE); rc = ib_sg_to_pages(ibmr, sg, sg_nents, sg_offset, mlx4_set_page); ib_dma_sync_single_for_device(ibmr->device, mr->page_map, - sizeof(u64) * mr->max_pages, - DMA_TO_DEVICE); + mr->page_map_size, DMA_TO_DEVICE); return rc; } -- cgit v1.2.3 From 2aee309d3e01447c55fdf89cef05a0e2be372655 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Fri, 17 Jun 2016 19:17:49 -0700 Subject: IB/hfi1: Fix deadlock with txreq allocation slow path A failure in the get_txreq() inline will result in a slow path retry using __get_txreq(). __get_txreq() attempts to procure the qp s_lock, which is already held in all callers. Fix by deleting the s_lock maintenance in __get_txreq() and add sparse syntax hooks to future proof the code. Cc: Stable # 4.6+ Reviewed-by: Dennis Dalessandro Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/verbs_txreq.c | 4 +--- drivers/infiniband/hw/hfi1/verbs_txreq.h | 1 + 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/verbs_txreq.c b/drivers/infiniband/hw/hfi1/verbs_txreq.c index bc95c4112c61..d8fb056526f8 100644 --- a/drivers/infiniband/hw/hfi1/verbs_txreq.c +++ b/drivers/infiniband/hw/hfi1/verbs_txreq.c @@ -92,11 +92,10 @@ void hfi1_put_txreq(struct verbs_txreq *tx) struct verbs_txreq *__get_txreq(struct hfi1_ibdev *dev, struct rvt_qp *qp) + __must_hold(&qp->s_lock) { struct verbs_txreq *tx = ERR_PTR(-EBUSY); - unsigned long flags; - spin_lock_irqsave(&qp->s_lock, flags); write_seqlock(&dev->iowait_lock); if (ib_rvt_state_ops[qp->state] & RVT_PROCESS_RECV_OK) { struct hfi1_qp_priv *priv; @@ -116,7 +115,6 @@ struct verbs_txreq *__get_txreq(struct hfi1_ibdev *dev, } out: write_sequnlock(&dev->iowait_lock); - spin_unlock_irqrestore(&qp->s_lock, flags); return tx; } diff --git a/drivers/infiniband/hw/hfi1/verbs_txreq.h b/drivers/infiniband/hw/hfi1/verbs_txreq.h index 1cf69b2fe4a5..a1d6e0807f97 100644 --- a/drivers/infiniband/hw/hfi1/verbs_txreq.h +++ b/drivers/infiniband/hw/hfi1/verbs_txreq.h @@ -73,6 +73,7 @@ struct verbs_txreq *__get_txreq(struct hfi1_ibdev *dev, static inline struct verbs_txreq *get_txreq(struct hfi1_ibdev *dev, struct rvt_qp *qp) + __must_hold(&qp->slock) { struct verbs_txreq *tx; struct hfi1_qp_priv *priv = qp->priv; -- cgit v1.2.3 From 8ae84f7c56044ee17ef6b700cb34d11ad9428a2e Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Fri, 17 Jun 2016 19:17:54 -0700 Subject: IB/hfi1: Don't zero out qp->s_ack_queue in rvt_reset_qp Since rvt_reset_qp already zero's out qp->s_ack_queue head and tail pointers, there is no need to zero out qp->s_ack_queue itself. Reviewed-by: Dennis Dalessandro Reviewed-by: Mike Marciniszyn Signed-off-by: Ashutosh Dixit Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rdmavt/qp.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c index c3e0d614f68b..d04f4fe522b5 100644 --- a/drivers/infiniband/sw/rdmavt/qp.c +++ b/drivers/infiniband/sw/rdmavt/qp.c @@ -576,12 +576,6 @@ static void rvt_reset_qp(struct rvt_dev_info *rdi, struct rvt_qp *qp, qp->s_ssn = 1; qp->s_lsn = 0; qp->s_mig_state = IB_MIG_MIGRATED; - if (qp->s_ack_queue) - memset( - qp->s_ack_queue, - 0, - rvt_max_atomic(rdi) * - sizeof(*qp->s_ack_queue)); qp->r_head_ack_queue = 0; qp->s_tail_ack_queue = 0; qp->s_num_rd_atomic = 0; -- cgit v1.2.3 From c755f4afa66ad3ed98870bd3254f37c47fb2c800 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Wed, 22 Jun 2016 13:29:33 -0700 Subject: IB/rdmavt: Correct qp_priv_alloc() return value test The current drivers return errors from this calldown wrapped in an ERR_PTR(). The rdmavt code incorrectly tests for NULL. The code is fixed to use IS_ERR() and change ret according to the driver return value. Cc: Stable # 4.6+ Reviewed-by: Dennis Dalessandro Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rdmavt/qp.c | 4 +++- include/rdma/rdma_vt.h | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c index d04f4fe522b5..41ba7e9cadaa 100644 --- a/drivers/infiniband/sw/rdmavt/qp.c +++ b/drivers/infiniband/sw/rdmavt/qp.c @@ -699,8 +699,10 @@ struct ib_qp *rvt_create_qp(struct ib_pd *ibpd, * initialization that is needed. */ priv = rdi->driver_f.qp_priv_alloc(rdi, qp, gfp); - if (!priv) + if (IS_ERR(priv)) { + ret = priv; goto bail_qp; + } qp->priv = priv; qp->timeout_jiffies = usecs_to_jiffies((4096UL * (1UL << qp->timeout)) / diff --git a/include/rdma/rdma_vt.h b/include/rdma/rdma_vt.h index 16274e2133cd..9c9a27d42aaa 100644 --- a/include/rdma/rdma_vt.h +++ b/include/rdma/rdma_vt.h @@ -203,7 +203,9 @@ struct rvt_driver_provided { /* * Allocate a private queue pair data structure for driver specific - * information which is opaque to rdmavt. + * information which is opaque to rdmavt. Errors are returned via + * ERR_PTR(err). The driver is free to return NULL or a valid + * pointer. */ void * (*qp_priv_alloc)(struct rvt_dev_info *rdi, struct rvt_qp *qp, gfp_t gfp); -- cgit v1.2.3 From 747f1c6d9be749a29612fc78c321b97099906008 Mon Sep 17 00:00:00 2001 From: Shiraz Saleem Date: Tue, 14 Jun 2016 16:54:16 -0500 Subject: i40iw: Correct CQ arming CQ is armed for solicited events only, ignoring other notification flags. Correct this by arming for next and arming for solicited event if IB_CQ_SOLICITED is set. Also protect CQ shadow area update with spinlock. Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_verbs.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.c b/drivers/infiniband/hw/i40iw/i40iw_verbs.c index 02a735b64208..c6e75acbbbcd 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_verbs.c +++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.c @@ -2327,13 +2327,16 @@ static int i40iw_req_notify_cq(struct ib_cq *ibcq, { struct i40iw_cq *iwcq; struct i40iw_cq_uk *ukcq; - enum i40iw_completion_notify cq_notify = IW_CQ_COMPL_SOLICITED; + unsigned long flags; + enum i40iw_completion_notify cq_notify = IW_CQ_COMPL_EVENT; iwcq = (struct i40iw_cq *)ibcq; ukcq = &iwcq->sc_cq.cq_uk; - if (notify_flags == IB_CQ_NEXT_COMP) - cq_notify = IW_CQ_COMPL_EVENT; + if (notify_flags == IB_CQ_SOLICITED) + cq_notify = IW_CQ_COMPL_SOLICITED; + spin_lock_irqsave(&iwcq->lock, flags); ukcq->ops.iw_cq_request_notification(ukcq, cq_notify); + spin_unlock_irqrestore(&iwcq->lock, flags); return 0; } -- cgit v1.2.3 From ee23abd75c5076e51061c275e8f659d754a63c9d Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Tue, 14 Jun 2016 16:54:17 -0500 Subject: i40iw: Correct status check on i40iw_get_pble i40iw_get_pble returns 0 on success. Correct the check on return code. Signed-off-by: Faisal Latif Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_verbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.c b/drivers/infiniband/hw/i40iw/i40iw_verbs.c index c6e75acbbbcd..65bea9c8df13 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_verbs.c +++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.c @@ -1527,7 +1527,7 @@ static struct ib_mr *i40iw_alloc_mr(struct ib_pd *pd, mutex_lock(&iwdev->pbl_mutex); status = i40iw_get_pble(&iwdev->sc_dev, iwdev->pble_rsrc, palloc, iwmr->page_cnt); mutex_unlock(&iwdev->pbl_mutex); - if (!status) + if (status) goto err1; if (palloc->level != I40IW_LEVEL_1) -- cgit v1.2.3 From 0477e18145c565f9ca74c6df4112f818f673fcaa Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Tue, 14 Jun 2016 16:54:18 -0500 Subject: i40iw: Return correct max_fast_reg_page_list_len Return correct value for max_fast_reg_page_list_len from i40iw_query_device(). Signed-off-by: Faisal Latif Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw.h | 1 + drivers/infiniband/hw/i40iw/i40iw_verbs.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw.h b/drivers/infiniband/hw/i40iw/i40iw.h index 8b9532034558..14f16a2dcbed 100644 --- a/drivers/infiniband/hw/i40iw/i40iw.h +++ b/drivers/infiniband/hw/i40iw/i40iw.h @@ -113,6 +113,7 @@ #define IW_HMC_OBJ_TYPE_NUM ARRAY_SIZE(iw_hmc_obj_types) #define IW_CFG_FPM_QP_COUNT 32768 +#define I40IW_MAX_PAGES_PER_FMR 512 #define I40IW_MTU_TO_MSS 40 #define I40IW_DEFAULT_MSS 1460 diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.c b/drivers/infiniband/hw/i40iw/i40iw_verbs.c index 65bea9c8df13..31eda323fcbf 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_verbs.c +++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.c @@ -79,6 +79,7 @@ static int i40iw_query_device(struct ib_device *ibdev, props->max_qp_init_rd_atom = props->max_qp_rd_atom; props->atomic_cap = IB_ATOMIC_NONE; props->max_map_per_fmr = 1; + props->max_fast_reg_page_list_len = I40IW_MAX_PAGES_PER_FMR; return 0; } -- cgit v1.2.3 From 7748e4990de42ea796543c0ffd34118c3a5e6a98 Mon Sep 17 00:00:00 2001 From: Shiraz Saleem Date: Tue, 14 Jun 2016 16:54:19 -0500 Subject: i40iw: Enable level-1 PBL for fast memory registration Set the chunk_size to enable level-1 PBL support when the fast memory page count is more than one. Signed-off-by: Shiraz Saleem Signed-off-by: Faisal Latif Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw.h | 1 + drivers/infiniband/hw/i40iw/i40iw_verbs.c | 5 +++++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw.h b/drivers/infiniband/hw/i40iw/i40iw.h index 14f16a2dcbed..b738acdb9b02 100644 --- a/drivers/infiniband/hw/i40iw/i40iw.h +++ b/drivers/infiniband/hw/i40iw/i40iw.h @@ -114,6 +114,7 @@ #define IW_HMC_OBJ_TYPE_NUM ARRAY_SIZE(iw_hmc_obj_types) #define IW_CFG_FPM_QP_COUNT 32768 #define I40IW_MAX_PAGES_PER_FMR 512 +#define I40IW_MIN_PAGES_PER_FMR 1 #define I40IW_MTU_TO_MSS 40 #define I40IW_DEFAULT_MSS 1460 diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.c b/drivers/infiniband/hw/i40iw/i40iw_verbs.c index 31eda323fcbf..33959ed14563 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_verbs.c +++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.c @@ -2150,6 +2150,7 @@ static int i40iw_post_send(struct ib_qp *ibqp, struct i40iw_sc_dev *dev = &iwqp->iwdev->sc_dev; struct i40iw_fast_reg_stag_info info; + memset(&info, 0, sizeof(info)); info.access_rights = I40IW_ACCESS_FLAGS_LOCALREAD; info.access_rights |= i40iw_get_user_access(flags); info.stag_key = reg_wr(ib_wr)->key & 0xff; @@ -2159,10 +2160,14 @@ static int i40iw_post_send(struct ib_qp *ibqp, info.addr_type = I40IW_ADDR_TYPE_VA_BASED; info.va = (void *)(uintptr_t)iwmr->ibmr.iova; info.total_len = iwmr->ibmr.length; + info.reg_addr_pa = *(u64 *)palloc->level1.addr; info.first_pm_pbl_index = palloc->level1.idx; info.local_fence = ib_wr->send_flags & IB_SEND_FENCE; info.signaled = ib_wr->send_flags & IB_SEND_SIGNALED; + if (iwmr->npages > I40IW_MIN_PAGES_PER_FMR) + info.chunk_size = 1; + if (page_shift == 21) info.page_size = 1; /* 2M page */ -- cgit v1.2.3 From c0cf4512a31eb3cec70b066bc36ed55f7d05b8c0 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Thu, 23 Jun 2016 09:35:48 +0200 Subject: IB/srpt: Reduce QP buffer size The memory needed for the send and receive queues associated with a QP is proportional to the max_sge parameter. The current value of that parameter is such that with an mlx4 HCA the QP buffer size is 8 MB. Since DMA is used for communication between HCA and CPU that buffer either has to be allocated coherently or map_single() must succeed for that buffer. Since large contiguous allocations are fragile and since the maximum segment size for e.g. swiotlb is 256 KB, reduce the max_sge parameter. This patch avoids that the following text appears on the console after SRP logout and relogin on a system equipped with multiple IB HCAs: mlx4_core 0000:05:00.0: swiotlb buffer is full (sz: 8388608 bytes) swiotlb: coherent allocation failed for device 0000:05:00.0 size=8388608 CPU: 11 PID: 148 Comm: kworker/11:1 Not tainted 4.7.0-rc4-dbg+ #1 Call Trace: [] dump_stack+0x67/0x92 [] swiotlb_alloc_coherent+0x141/0x150 [] x86_swiotlb_alloc_coherent+0x3e/0x50 [] mlx4_buf_direct_alloc.isra.5+0x9a/0x120 [mlx4_core] [] mlx4_buf_alloc+0x165/0x1a0 [mlx4_core] [] create_qp_common.isra.29+0x57d/0xff0 [mlx4_ib] [] mlx4_ib_create_qp+0x12a/0x3f0 [mlx4_ib] [] ib_create_qp+0x3a/0x250 [ib_core] [] srpt_cm_handler+0x4bb/0xcad [ib_srpt] [] cm_process_work+0x20/0xf0 [ib_cm] [] cm_work_handler+0x1ac0/0x2059 [ib_cm] [] process_one_work+0x19d/0x490 [] worker_thread+0x49/0x490 [] kthread+0xea/0x100 [] ret_from_fork+0x1f/0x40 Fixes: b99f8e4d7bcd ("IB/srpt: convert to the generic RDMA READ/WRITE API") Signed-off-by: Bart Van Assche Cc: Laurence Oberman Cc: Christoph Hellwig Cc: Sagi Grimberg Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/srpt/ib_srpt.c | 3 +-- drivers/infiniband/ulp/srpt/ib_srpt.h | 1 + 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index e68b20cba70b..4a4155640d51 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -1638,8 +1638,7 @@ retry: */ qp_init->cap.max_send_wr = srp_sq_size / 2; qp_init->cap.max_rdma_ctxs = srp_sq_size / 2; - qp_init->cap.max_send_sge = max(sdev->device->attrs.max_sge_rd, - sdev->device->attrs.max_sge); + qp_init->cap.max_send_sge = SRPT_DEF_SG_PER_WQE; qp_init->port_num = ch->sport->port; ch->qp = ib_create_qp(sdev->pd, qp_init); diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.h b/drivers/infiniband/ulp/srpt/ib_srpt.h index fee6bfd7ca21..389030487da7 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.h +++ b/drivers/infiniband/ulp/srpt/ib_srpt.h @@ -106,6 +106,7 @@ enum { SRP_LOGIN_RSP_MULTICHAN_MAINTAINED = 0x2, SRPT_DEF_SG_TABLESIZE = 128, + SRPT_DEF_SG_PER_WQE = 16, MIN_SRPT_SQ_SIZE = 16, DEF_SRPT_SQ_SIZE = 4096, -- cgit v1.2.3 From c7f1429389ec1aa25e042bb13451385fbb596f8c Mon Sep 17 00:00:00 2001 From: Cameron Gutman Date: Thu, 23 Jun 2016 10:24:42 -0700 Subject: Input: xpad - fix oops when attaching an unknown Xbox One gamepad Xbox One controllers have multiple interfaces which all have the same class, subclass, and protocol. One of the these interfaces has only a single endpoint. When Xpad attempts to bind to this interface, it causes an oops when trying initialize the output URB by trying to access the second endpoint's descriptor. This situation was avoided for known Xbox One devices by checking the XTYPE constant associated with the VID and PID tuple. However, this breaks when new or previously unknown Xbox One controllers are attached to the system. This change addresses the problem by deriving the XTYPE for Xbox One controllers based on the interface protocol before checking the interface number. Fixes: 1a48ff81b391 ("Input: xpad - add support for Xbox One controllers") Signed-off-by: Cameron Gutman Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 923c57236c51..3438e98c145a 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -1437,16 +1437,6 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id break; } - if (xpad_device[i].xtype == XTYPE_XBOXONE && - intf->cur_altsetting->desc.bInterfaceNumber != 0) { - /* - * The Xbox One controller lists three interfaces all with the - * same interface class, subclass and protocol. Differentiate by - * interface number. - */ - return -ENODEV; - } - xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL); if (!xpad) return -ENOMEM; @@ -1478,6 +1468,8 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) { if (intf->cur_altsetting->desc.bInterfaceProtocol == 129) xpad->xtype = XTYPE_XBOX360W; + else if (intf->cur_altsetting->desc.bInterfaceProtocol == 208) + xpad->xtype = XTYPE_XBOXONE; else xpad->xtype = XTYPE_XBOX360; } else { @@ -1492,6 +1484,17 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id xpad->mapping |= MAP_STICKS_TO_NULL; } + if (xpad->xtype == XTYPE_XBOXONE && + intf->cur_altsetting->desc.bInterfaceNumber != 0) { + /* + * The Xbox One controller lists three interfaces all with the + * same interface class, subclass and protocol. Differentiate by + * interface number. + */ + error = -ENODEV; + goto err_free_in_urb; + } + error = xpad_init_output(intf, xpad); if (error) goto err_free_in_urb; -- cgit v1.2.3 From 02bae045f3b3bc5681f075be0a8b1313147d1df2 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 23 Jun 2016 10:58:26 +0800 Subject: drm/amd/powerplay: add some definition for FFC feature on polaris. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h | 2 ++ drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h | 3 ++- 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h b/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h index d41d37ab5b7c..b8f4b73c322e 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h +++ b/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h @@ -392,6 +392,8 @@ typedef uint16_t PPSMC_Result; #define PPSMC_MSG_SetGpuPllDfsForSclk ((uint16_t) 0x300) #define PPSMC_MSG_Didt_Block_Function ((uint16_t) 0x301) +#define PPSMC_MSG_SetVBITimeout ((uint16_t) 0x306) + #define PPSMC_MSG_SecureSRBMWrite ((uint16_t) 0x600) #define PPSMC_MSG_SecureSRBMRead ((uint16_t) 0x601) #define PPSMC_MSG_SetAddress ((uint16_t) 0x800) diff --git a/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h b/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h index b85ff5400e57..899d6d8108c2 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h +++ b/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h @@ -270,7 +270,8 @@ struct SMU74_Discrete_DpmTable { uint8_t BootPhases; uint8_t VRHotLevel; - uint8_t Reserved1[3]; + uint8_t LdoRefSel; + uint8_t Reserved1[2]; uint16_t FanStartTemperature; uint16_t FanStopTemperature; uint16_t MaxVoltage; -- cgit v1.2.3 From 83a7af6dcfd2d84066c6d19bf2bd837f7be4a5ca Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 23 Jun 2016 11:05:00 +0800 Subject: drm/amd/powerplay: disable FFC. SMC need use VBI signal for MCLK switching Send 2 x frame time as vbi timeout Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 26 +++++++++++++++++----- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h | 1 + drivers/gpu/drm/amd/powerplay/inc/hwmgr.h | 2 ++ 3 files changed, 24 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index 64ee78f7d41e..20ccbc73a8f7 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -1805,6 +1805,7 @@ static int polaris10_populate_clock_stretcher_data_table(struct pp_hwmgr *hwmgr) data->smc_state_table.Sclk_voltageOffset[i] = volt_offset; } + data->smc_state_table.LdoRefSel = (table_info->cac_dtp_table->ucCKS_LDO_REFSEL != 0) ? table_info->cac_dtp_table->ucCKS_LDO_REFSEL : 6; /* Populate CKS Lookup Table */ if (stretch_amount == 1 || stretch_amount == 2 || stretch_amount == 5) stretch_amount2 = 0; @@ -2487,6 +2488,8 @@ int polaris10_enable_dpm_tasks(struct pp_hwmgr *hwmgr) PP_ASSERT_WITH_CODE((0 == tmp_result), "Failed to enable VR hot GPIO interrupt!", result = tmp_result); + smum_send_msg_to_smc(hwmgr->smumgr, (PPSMC_Msg)PPSMC_HasDisplay); + tmp_result = polaris10_enable_sclk_control(hwmgr); PP_ASSERT_WITH_CODE((0 == tmp_result), "Failed to enable SCLK control!", result = tmp_result); @@ -4359,6 +4362,15 @@ static int polaris10_notify_link_speed_change_after_state_change( return 0; } +static int polaris10_notify_smc_display(struct pp_hwmgr *hwmgr) +{ + struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + + smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, + (PPSMC_Msg)PPSMC_MSG_SetVBITimeout, data->frame_time_x2); + return (smum_send_msg_to_smc(hwmgr->smumgr, (PPSMC_Msg)PPSMC_HasDisplay) == 0) ? 0 : -EINVAL; +} + static int polaris10_set_power_state_tasks(struct pp_hwmgr *hwmgr, const void *input) { int tmp_result, result = 0; @@ -4407,6 +4419,11 @@ static int polaris10_set_power_state_tasks(struct pp_hwmgr *hwmgr, const void *i "Failed to program memory timing parameters!", result = tmp_result); + tmp_result = polaris10_notify_smc_display(hwmgr); + PP_ASSERT_WITH_CODE((0 == tmp_result), + "Failed to notify smc display settings!", + result = tmp_result); + tmp_result = polaris10_unfreeze_sclk_mclk_dpm(hwmgr); PP_ASSERT_WITH_CODE((0 == tmp_result), "Failed to unfreeze SCLK MCLK DPM!", @@ -4441,6 +4458,7 @@ static int polaris10_set_max_fan_pwm_output(struct pp_hwmgr *hwmgr, uint16_t us_ PPSMC_MSG_SetFanPwmMax, us_max_fan_pwm); } + int polaris10_notify_smc_display_change(struct pp_hwmgr *hwmgr, bool has_display) { PPSMC_Msg msg = has_display ? (PPSMC_Msg)PPSMC_HasDisplay : (PPSMC_Msg)PPSMC_NoDisplay; @@ -4460,8 +4478,6 @@ int polaris10_notify_smc_display_config_after_ps_adjustment(struct pp_hwmgr *hwm if (num_active_displays > 1) /* to do && (pHwMgr->pPECI->displayConfiguration.bMultiMonitorInSync != TRUE)) */ polaris10_notify_smc_display_change(hwmgr, false); - else - polaris10_notify_smc_display_change(hwmgr, true); return 0; } @@ -4502,6 +4518,8 @@ int polaris10_program_display_gap(struct pp_hwmgr *hwmgr) frame_time_in_us = 1000000 / refresh_rate; pre_vbi_time_in_us = frame_time_in_us - 200 - mode_info.vblank_time_us; + data->frame_time_x2 = frame_time_in_us * 2 / 100; + display_gap2 = pre_vbi_time_in_us * (ref_clock / 100); cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_DISPLAY_GAP_CNTL2, display_gap2); @@ -4510,8 +4528,6 @@ int polaris10_program_display_gap(struct pp_hwmgr *hwmgr) cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, data->soft_regs_start + offsetof(SMU74_SoftRegisters, VBlankTimeout), (frame_time_in_us - pre_vbi_time_in_us)); - polaris10_notify_smc_display_change(hwmgr, num_active_displays != 0); - return 0; } @@ -4623,7 +4639,7 @@ int polaris10_upload_mc_firmware(struct pp_hwmgr *hwmgr) return 0; } - data->need_long_memory_training = true; + data->need_long_memory_training = false; /* * PPMCME_FirmwareDescriptorEntry *pfd = NULL; diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h index d717789441f5..afc3434822d1 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h @@ -315,6 +315,7 @@ struct polaris10_hwmgr { uint32_t avfs_vdroop_override_setting; bool apply_avfs_cks_off_voltage; + uint32_t frame_time_x2; }; /* To convert to Q8.8 format for firmware */ diff --git a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h index 28f571449495..77e8e33d5870 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h +++ b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h @@ -411,6 +411,8 @@ struct phm_cac_tdp_table { uint8_t ucVr_I2C_Line; uint8_t ucPlx_I2C_address; uint8_t ucPlx_I2C_Line; + uint32_t usBoostPowerLimit; + uint8_t ucCKS_LDO_REFSEL; }; struct phm_ppm_table { -- cgit v1.2.3 From 0812a945fbb814e7946fbe6ddcc81d054c8b6c91 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 22 Jun 2016 21:00:09 +0800 Subject: drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation CKS on/off voltage offset calculation algorithm takes in a few coefficients. We need to update them for polaris to latest coefficients to align with BB. Signed-off-by: Rex Zhu Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 26 ++++++++++++++-------- 1 file changed, 17 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index 20ccbc73a8f7..d23dcce6c03c 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -98,6 +98,7 @@ #define PCIE_BUS_CLK 10000 #define TCLK (PCIE_BUS_CLK / 10) +#define CEILING_UCHAR(double) ((double-(uint8_t)(double)) > 0 ? (uint8_t)(double+1) : (uint8_t)(double)) static const uint16_t polaris10_clock_stretcher_lookup_table[2][4] = { {600, 1050, 3, 0}, {600, 1050, 6, 1} }; @@ -1787,20 +1788,27 @@ static int polaris10_populate_clock_stretcher_data_table(struct pp_hwmgr *hwmgr) ro = efuse * (max -min)/255 + min; - /* Populate Sclk_CKS_masterEn0_7 and Sclk_voltageOffset */ + /* Populate Sclk_CKS_masterEn0_7 and Sclk_voltageOffset + * there is a little difference in calculating + * volt_with_cks with windows */ for (i = 0; i < sclk_table->count; i++) { data->smc_state_table.Sclk_CKS_masterEn0_7 |= sclk_table->entries[i].cks_enable << i; - - volt_without_cks = (uint32_t)(((ro - 40) * 1000 - 2753594 - sclk_table->entries[i].clk/100 * 136418 /1000) / \ - (sclk_table->entries[i].clk/100 * 1132925 /10000 - 242418)/100); - - volt_with_cks = (uint32_t)((ro * 1000 -2396351 - sclk_table->entries[i].clk/100 * 329021/1000) / \ - (sclk_table->entries[i].clk/10000 * 649434 /1000 - 18005)/10); + if (hwmgr->chip_id == CHIP_POLARIS10) { + volt_without_cks = (uint32_t)((2753594000 + (sclk_table->entries[i].clk/100) * 136418 -(ro - 70) * 1000000) / \ + (2424180 - (sclk_table->entries[i].clk/100) * 1132925/1000)); + volt_with_cks = (uint32_t)((279720200 + sclk_table->entries[i].clk * 3232 - (ro - 65) * 100000000) / \ + (252248000 - sclk_table->entries[i].clk/100 * 115764)); + } else { + volt_without_cks = (uint32_t)((2416794800 + (sclk_table->entries[i].clk/100) * 1476925/10 -(ro - 50) * 1000000) / \ + (2625416 - (sclk_table->entries[i].clk/100) * 12586807/10000)); + volt_with_cks = (uint32_t)((2999656000 + sclk_table->entries[i].clk * 392803/100 - (ro - 44) * 1000000) / \ + (3422454 - sclk_table->entries[i].clk/100 * 18886376/10000)); + } if (volt_without_cks >= volt_with_cks) - volt_offset = (uint8_t)(((volt_without_cks - volt_with_cks + - sclk_table->entries[i].cks_voffset) * 100 / 625) + 1); + volt_offset = (uint8_t)CEILING_UCHAR((volt_without_cks - volt_with_cks + + sclk_table->entries[i].cks_voffset) * 100 / 625); data->smc_state_table.Sclk_voltageOffset[i] = volt_offset; } -- cgit v1.2.3 From 12afb34400eb2b301f06b2aa3535497d14faee59 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Thu, 23 Jun 2016 10:54:17 -0700 Subject: Input: wacom_w8001 - w8001_MAX_LENGTH should be 13 Somehow the patch that added two-finger touch support forgot to update W8001_MAX_LENGTH from 11 to 13. Signed-off-by: Ping Cheng Reviewed-by: Peter Hutterer Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wacom_w8001.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index bab3c6acf6a2..b1b412766da8 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -27,7 +27,7 @@ MODULE_AUTHOR("Jaya Kumar "); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -#define W8001_MAX_LENGTH 11 +#define W8001_MAX_LENGTH 13 #define W8001_LEAD_MASK 0x80 #define W8001_LEAD_BYTE 0x80 #define W8001_TAB_MASK 0x40 -- cgit v1.2.3 From 52fe705b493d40b472b9e7220a71bdca8537c6b2 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Tue, 21 Jun 2016 15:39:43 +1200 Subject: net: vrf: replace hard tab with space in assignment The assignment of rth->dst.output in vrf_rt6_create() and vrf_rtable_create() used a hard tab before the '='. The neighboring assignments did not. Make the assignment of rth->dst.output consistent with the surrounding code. Signed-off-by: Chris Packham Acked-by: David Ahern Signed-off-by: David S. Miller --- drivers/net/vrf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index dff08842f26d..8bd8c7e1ee87 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -304,7 +304,7 @@ static int vrf_rt6_create(struct net_device *dev) dst_hold(&rt6->dst); rt6->rt6i_table = rt6i_table; - rt6->dst.output = vrf_output6; + rt6->dst.output = vrf_output6; rcu_assign_pointer(vrf->rt6, rt6); rc = 0; @@ -403,7 +403,7 @@ static int vrf_rtable_create(struct net_device *dev) if (!rth) return -ENOMEM; - rth->dst.output = vrf_output; + rth->dst.output = vrf_output; rth->rt_table_id = vrf->tb_id; rcu_assign_pointer(vrf->rth, rth); -- cgit v1.2.3 From efeb2267bba8aa893afdadfc9bae4790777c600c Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Tue, 21 Jun 2016 16:26:49 +0800 Subject: geneve: fix tx_errors statistics Tx errors present summation of errors encountered while transmitting packets. Signed-off-by: Haishuang Yan Signed-off-by: David S. Miller --- drivers/net/geneve.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 305a04e45a13..cc39cefeae45 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -958,8 +958,8 @@ tx_error: dev->stats.collisions++; else if (err == -ENETUNREACH) dev->stats.tx_carrier_errors++; - else - dev->stats.tx_errors++; + + dev->stats.tx_errors++; return NETDEV_TX_OK; } @@ -1048,8 +1048,8 @@ tx_error: dev->stats.collisions++; else if (err == -ENETUNREACH) dev->stats.tx_carrier_errors++; - else - dev->stats.tx_errors++; + + dev->stats.tx_errors++; return NETDEV_TX_OK; } #endif -- cgit v1.2.3 From 9e72ac7492149a229ce9039c680849cb682d7092 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Thu, 23 Jun 2016 10:55:11 -0700 Subject: Input: wacom_w8001 - ignore invalid pen data packets ThinkPad X60 Tablet PC (pen only device) sometime posts packets that are larger than W8001_PKTLEN_TPCPEN. Reported-by: Chris J Arges Tested-by: Chris J Arges Signed-off-by: Ping Cheng Reviewed-by: Peter Hutterer Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wacom_w8001.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index b1b412766da8..0c9191cf324d 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -339,6 +339,15 @@ static irqreturn_t w8001_interrupt(struct serio *serio, w8001->idx = 0; parse_multi_touch(w8001); break; + + default: + /* + * ThinkPad X60 Tablet PC (pen only device) sometimes + * sends invalid data packets that are larger than + * W8001_PKTLEN_TPCPEN. Let's start over again. + */ + if (!w8001->touch_dev && w8001->idx > W8001_PKTLEN_TPCPEN - 1) + w8001->idx = 0; } return IRQ_HANDLED; -- cgit v1.2.3 From 226ba707744a51acb4244724e09caacb1d96aed9 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 21 Jun 2016 16:09:00 -0700 Subject: Input: elantech - add more IC body types to the list The touchpad in HP Pavilion 14-ab057ca reports it's version as 12 and according to Elan both 11 and 12 are valid IC types and should be identified as hw_version 4. Reported-by: Patrick Lessard Tested-by: Patrick Lessard Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 78f93cf68840..be5b399da5d3 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1568,13 +1568,7 @@ static int elantech_set_properties(struct elantech_data *etd) case 5: etd->hw_version = 3; break; - case 6: - case 7: - case 8: - case 9: - case 10: - case 13: - case 14: + case 6 ... 14: etd->hw_version = 4; break; default: -- cgit v1.2.3 From 3c67a829bd45f99b5c03580bb898c99fcc023356 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Thu, 23 Jun 2016 08:45:42 +0200 Subject: cpufreq: pcc-cpufreq: Fix doorbell.access_width Commit 920de6ebfab8 (ACPICA: Hardware: Enhance acpi_hw_validate_register() with access_width/bit_offset awareness) apparently exposed a latent bug, doorbell.access_width is initialized to 64, but per Lv Zheng, it should be 4, and indeed, making that change does bring pcc-cpufreq back to life. Fixes: 920de6ebfab8 (ACPICA: Hardware: Enhance acpi_hw_validate_register() with access_width/bit_offset awareness) Suggested-by: Lv Zheng Signed-off-by: Mike Galbraith Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/pcc-cpufreq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c index 808a320e9d5d..a7ecb9a84c15 100644 --- a/drivers/cpufreq/pcc-cpufreq.c +++ b/drivers/cpufreq/pcc-cpufreq.c @@ -487,7 +487,7 @@ static int __init pcc_cpufreq_probe(void) doorbell.space_id = reg_resource->space_id; doorbell.bit_width = reg_resource->bit_width; doorbell.bit_offset = reg_resource->bit_offset; - doorbell.access_width = 64; + doorbell.access_width = 4; doorbell.address = reg_resource->address; pr_debug("probe: doorbell: space_id is %d, bit_width is %d, " -- cgit v1.2.3 From 0d37189e80163c653771916afe28fae1a8d14daa Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Thu, 23 Jun 2016 11:18:43 +0900 Subject: PM / devfreq: Send the DEVFREQ_POSTCHANGE notification when target() is failed This patch sends the DEVFREQ_POSTCHANGE notification when devfreq->profile->targer() is failed. The PRECHANGE/POSTCHANGE should be paired. Fixes: 0fe3a66410a3 (PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier) Reported-by: Lin Huang Signed-off-by: Chanwoo Choi Signed-off-by: Rafael J. Wysocki --- drivers/devfreq/devfreq.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index c7f47e34807b..e92418facc92 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -268,8 +268,11 @@ int update_devfreq(struct devfreq *devfreq) devfreq_notify_transition(devfreq, &freqs, DEVFREQ_PRECHANGE); err = devfreq->profile->target(devfreq->dev.parent, &freq, flags); - if (err) + if (err) { + freqs.new = cur_freq; + devfreq_notify_transition(devfreq, &freqs, DEVFREQ_POSTCHANGE); return err; + } freqs.new = freq; devfreq_notify_transition(devfreq, &freqs, DEVFREQ_POSTCHANGE); -- cgit v1.2.3 From 52dfcc5ccfbb6697ac3cac7f7ff1e712760e1216 Mon Sep 17 00:00:00 2001 From: Dmitrii Tcvetkov Date: Mon, 20 Jun 2016 13:52:14 +0300 Subject: drm/nouveau: fix for disabled fbdev emulation Hello, after this commit: commit f045f459d925138fe7d6193a8c86406bda7e49da Author: Ben Skeggs Date: Thu Jun 2 12:23:31 2016 +1000 drm/nouveau/fbcon: fix out-of-bounds memory accesses kernel started to oops when loading nouveau module when using GTX 780 Ti video adapter. This patch fixes the problem. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=120591 Signed-off-by: Dmitrii Tcvetkov Suggested-by: Ilia Mirkin Fixes: f045f459d925 ("nouveau_fbcon_init()") Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 300ea03be8f0..d1f248fd3506 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -552,7 +552,8 @@ nouveau_fbcon_init(struct drm_device *dev) if (ret) goto fini; - fbcon->helper.fbdev->pixmap.buf_align = 4; + if (fbcon->helper.fbdev) + fbcon->helper.fbdev->pixmap.buf_align = 4; return 0; fini: -- cgit v1.2.3 From 60842ef8128e7bf58c024814cd0dc14319232b6c Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Thu, 23 Jun 2016 17:37:34 -0700 Subject: Input: vmmouse - remove port reservation The VMWare EFI BIOS will expose port 0x5658 as an ACPI resource. This causes the port to be reserved by the APCI module as the system comes up, making it unavailable to be reserved again by other drivers, thus preserving this VMWare port for special use in a VMWare guest. This port is designed to be shared among multiple VMWare services, such as the VMMOUSE. Because of this, VMMOUSE should not try to reserve this port on its own. The VMWare non-EFI BIOS does not do this to preserve compatibility with existing/legacy VMs. It is known that there is small chance a VM may be configured such that these ports get reserved by other non-VMWare devices, and if this ever happens, the result is undefined. Signed-off-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom Cc: # 4.1- Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/vmmouse.c | 22 ++-------------------- 1 file changed, 2 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/vmmouse.c b/drivers/input/mouse/vmmouse.c index a3f0f5a47490..0f586780ceb4 100644 --- a/drivers/input/mouse/vmmouse.c +++ b/drivers/input/mouse/vmmouse.c @@ -355,18 +355,11 @@ int vmmouse_detect(struct psmouse *psmouse, bool set_properties) return -ENXIO; } - if (!request_region(VMMOUSE_PROTO_PORT, 4, "vmmouse")) { - psmouse_dbg(psmouse, "VMMouse port in use.\n"); - return -EBUSY; - } - /* Check if the device is present */ response = ~VMMOUSE_PROTO_MAGIC; VMMOUSE_CMD(GETVERSION, 0, version, response, dummy1, dummy2); - if (response != VMMOUSE_PROTO_MAGIC || version == 0xffffffffU) { - release_region(VMMOUSE_PROTO_PORT, 4); + if (response != VMMOUSE_PROTO_MAGIC || version == 0xffffffffU) return -ENXIO; - } if (set_properties) { psmouse->vendor = VMMOUSE_VENDOR; @@ -374,8 +367,6 @@ int vmmouse_detect(struct psmouse *psmouse, bool set_properties) psmouse->model = version; } - release_region(VMMOUSE_PROTO_PORT, 4); - return 0; } @@ -394,7 +385,6 @@ static void vmmouse_disconnect(struct psmouse *psmouse) psmouse_reset(psmouse); input_unregister_device(priv->abs_dev); kfree(priv); - release_region(VMMOUSE_PROTO_PORT, 4); } /** @@ -438,15 +428,10 @@ int vmmouse_init(struct psmouse *psmouse) struct input_dev *rel_dev = psmouse->dev, *abs_dev; int error; - if (!request_region(VMMOUSE_PROTO_PORT, 4, "vmmouse")) { - psmouse_dbg(psmouse, "VMMouse port in use.\n"); - return -EBUSY; - } - psmouse_reset(psmouse); error = vmmouse_enable(psmouse); if (error) - goto release_region; + return error; priv = kzalloc(sizeof(*priv), GFP_KERNEL); abs_dev = input_allocate_device(); @@ -502,8 +487,5 @@ init_fail: kfree(priv); psmouse->private = NULL; -release_region: - release_region(VMMOUSE_PROTO_PORT, 4); - return error; } -- cgit v1.2.3 From 1ee6667cd8d183b2fed12f97285f184431d2caf9 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 23 Jun 2016 17:50:39 -0700 Subject: libnvdimm, pfn, dax: fix initialization vs autodetect for mode + alignment The updated ndctl unit tests discovered that if a pfn configuration with a 4K alignment is read from the namespace, that alignment will be ignored in favor of the default 2M alignment. The result is that the configuration will fail initialization with a message like: dax6.1: bad offset: 0x22000 dax disabled align: 0x200000 Fix this by allowing the alignment read from the info block to override the default which is 2M not 0 in the autodetect path. This also fixes a similar problem with the mode and alignment settings silently being overwritten by the kernel when userspace has changed it. We now will either overwrite the info block if userspace changes the uuid or fail and warn if a live setting disagrees with the info block. Cc: Cc: Micah Parrish Cc: Toshi Kani Signed-off-by: Dan Williams --- drivers/nvdimm/pfn_devs.c | 51 +++++++++++++++++++++++++++++++++++++---------- 1 file changed, 40 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/nvdimm/pfn_devs.c b/drivers/nvdimm/pfn_devs.c index f7718ec685fa..cea8350fbc7e 100644 --- a/drivers/nvdimm/pfn_devs.c +++ b/drivers/nvdimm/pfn_devs.c @@ -344,6 +344,8 @@ struct device *nd_pfn_create(struct nd_region *nd_region) int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig) { u64 checksum, offset; + unsigned long align; + enum nd_pfn_mode mode; struct nd_namespace_io *nsio; struct nd_pfn_sb *pfn_sb = nd_pfn->pfn_sb; struct nd_namespace_common *ndns = nd_pfn->ndns; @@ -386,22 +388,50 @@ int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig) return -ENXIO; } + align = le32_to_cpu(pfn_sb->align); + offset = le64_to_cpu(pfn_sb->dataoff); + if (align == 0) + align = 1UL << ilog2(offset); + mode = le32_to_cpu(pfn_sb->mode); + if (!nd_pfn->uuid) { - /* from probe we allocate */ + /* + * When probing a namepace via nd_pfn_probe() the uuid + * is NULL (see: nd_pfn_devinit()) we init settings from + * pfn_sb + */ nd_pfn->uuid = kmemdup(pfn_sb->uuid, 16, GFP_KERNEL); if (!nd_pfn->uuid) return -ENOMEM; + nd_pfn->align = align; + nd_pfn->mode = mode; } else { - /* from init we validate */ + /* + * When probing a pfn / dax instance we validate the + * live settings against the pfn_sb + */ if (memcmp(nd_pfn->uuid, pfn_sb->uuid, 16) != 0) return -ENODEV; + + /* + * If the uuid validates, but other settings mismatch + * return EINVAL because userspace has managed to change + * the configuration without specifying new + * identification. + */ + if (nd_pfn->align != align || nd_pfn->mode != mode) { + dev_err(&nd_pfn->dev, + "init failed, settings mismatch\n"); + dev_dbg(&nd_pfn->dev, "align: %lx:%lx mode: %d:%d\n", + nd_pfn->align, align, nd_pfn->mode, + mode); + return -EINVAL; + } } - if (nd_pfn->align == 0) - nd_pfn->align = le32_to_cpu(pfn_sb->align); - if (nd_pfn->align > nvdimm_namespace_capacity(ndns)) { + if (align > nvdimm_namespace_capacity(ndns)) { dev_err(&nd_pfn->dev, "alignment: %lx exceeds capacity %llx\n", - nd_pfn->align, nvdimm_namespace_capacity(ndns)); + align, nvdimm_namespace_capacity(ndns)); return -EINVAL; } @@ -411,7 +441,6 @@ int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig) * namespace has changed since the pfn superblock was * established. */ - offset = le64_to_cpu(pfn_sb->dataoff); nsio = to_nd_namespace_io(&ndns->dev); if (offset >= resource_size(&nsio->res)) { dev_err(&nd_pfn->dev, "pfn array size exceeds capacity of %s\n", @@ -419,10 +448,11 @@ int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig) return -EBUSY; } - if ((nd_pfn->align && !IS_ALIGNED(offset, nd_pfn->align)) + if ((align && !IS_ALIGNED(offset, align)) || !IS_ALIGNED(offset, PAGE_SIZE)) { - dev_err(&nd_pfn->dev, "bad offset: %#llx dax disabled\n", - offset); + dev_err(&nd_pfn->dev, + "bad offset: %#llx dax disabled align: %#lx\n", + offset, align); return -ENXIO; } @@ -502,7 +532,6 @@ static struct vmem_altmap *__nvdimm_setup_pfn(struct nd_pfn *nd_pfn, res->start += start_pad; res->end -= end_trunc; - nd_pfn->mode = le32_to_cpu(nd_pfn->pfn_sb->mode); if (nd_pfn->mode == PFN_MODE_RAM) { if (offset < SZ_8K) return ERR_PTR(-EINVAL); -- cgit v1.2.3 From 81e257e964268d050f8e9188becd44d50f241d72 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Thu, 23 Jun 2016 13:45:06 +0200 Subject: drm/atomic: Make drm_atomic_legacy_backoff reset crtc->acquire_ctx Atomic updates may acquire more state than initially locked through drm_modeset_lock_crtc, running with heavy stress can cause a WARN_ON(crtc->acquire_ctx) in drm_modeset_lock_crtc: [ 601.491296] ------------[ cut here ]------------ [ 601.491366] WARNING: CPU: 0 PID: 2411 at drivers/gpu/drm/drm_modeset_lock.c:191 drm_modeset_lock_crtc+0xeb/0xf0 [drm] [ 601.491369] Modules linked in: drm i915 drm_kms_helper [ 601.491414] CPU: 0 PID: 2411 Comm: kms_cursor_lega Tainted: G U 4.7.0-rc4-patser+ #4798 [ 601.491417] Hardware name: Intel Corporation Skylake Client [ 601.491420] 0000000000000000 ffff88044d153c98 ffffffff812ead28 0000000000000000 [ 601.491425] 0000000000000000 ffff88044d153cd8 ffffffff810868e6 000000bf58058030 [ 601.491431] ffff880088b415e8 ffff880458058030 ffff88008a271548 ffff88008a271568 [ 601.491436] Call Trace: [ 601.491443] [] dump_stack+0x4d/0x65 [ 601.491447] [] __warn+0xc6/0xe0 [ 601.491452] [] warn_slowpath_null+0x18/0x20 [ 601.491472] [] drm_modeset_lock_crtc+0xeb/0xf0 [drm] [ 601.491491] [] drm_mode_cursor_common+0x66/0x180 [drm] [ 601.491509] [] drm_mode_cursor_ioctl+0x3c/0x40 [drm] [ 601.491524] [] drm_ioctl+0x14d/0x530 [drm] [ 601.491540] [] ? drm_mode_setcrtc+0x520/0x520 [drm] [ 601.491545] [] ? handle_mm_fault+0x106b/0x1430 [ 601.491550] [] ? stop_one_cpu+0x61/0x70 [ 601.491556] [] do_vfs_ioctl+0x8d/0x570 [ 601.491560] [] ? security_file_ioctl+0x3e/0x60 [ 601.491565] [] SyS_ioctl+0x74/0x80 [ 601.491571] [] ? posix_get_monotonic_raw+0xc/0x10 [ 601.491576] [] entry_SYSCALL_64_fastpath+0x13/0x8f [ 601.491581] ---[ end trace 56f3d3d85f000d00 ]--- For good measure, test mode_config.acquire_ctx too, although this should never happen. Testcase: kms_cursor_legacy Signed-off-by: Maarten Lankhorst Reviewed-by: Daniel Vetter Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_atomic.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index c204ef32df16..9bb99e274d23 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -1296,14 +1296,39 @@ EXPORT_SYMBOL(drm_atomic_add_affected_planes); */ void drm_atomic_legacy_backoff(struct drm_atomic_state *state) { + struct drm_device *dev = state->dev; + unsigned crtc_mask = 0; + struct drm_crtc *crtc; int ret; + bool global = false; + + drm_for_each_crtc(crtc, dev) { + if (crtc->acquire_ctx != state->acquire_ctx) + continue; + + crtc_mask |= drm_crtc_mask(crtc); + crtc->acquire_ctx = NULL; + } + + if (WARN_ON(dev->mode_config.acquire_ctx == state->acquire_ctx)) { + global = true; + + dev->mode_config.acquire_ctx = NULL; + } retry: drm_modeset_backoff(state->acquire_ctx); - ret = drm_modeset_lock_all_ctx(state->dev, state->acquire_ctx); + ret = drm_modeset_lock_all_ctx(dev, state->acquire_ctx); if (ret) goto retry; + + drm_for_each_crtc(crtc, dev) + if (drm_crtc_mask(crtc) & crtc_mask) + crtc->acquire_ctx = state->acquire_ctx; + + if (global) + dev->mode_config.acquire_ctx = state->acquire_ctx; } EXPORT_SYMBOL(drm_atomic_legacy_backoff); -- cgit v1.2.3 From 93a2001bdfd5376c3dc2158653034c20392d15c5 Mon Sep 17 00:00:00 2001 From: Scott Bauer Date: Thu, 23 Jun 2016 08:59:47 -0600 Subject: HID: hiddev: validate num_values for HIDIOCGUSAGES, HIDIOCSUSAGES commands This patch validates the num_values parameter from userland during the HIDIOCGUSAGES and HIDIOCSUSAGES commands. Previously, if the report id was set to HID_REPORT_ID_UNKNOWN, we would fail to validate the num_values parameter leading to a heap overflow. Cc: stable@vger.kernel.org Signed-off-by: Scott Bauer Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index 2f1ddca6f2e0..700145b15088 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -516,13 +516,13 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd, goto inval; } else if (uref->usage_index >= field->report_count) goto inval; - - else if ((cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) && - (uref_multi->num_values > HID_MAX_MULTI_USAGES || - uref->usage_index + uref_multi->num_values > field->report_count)) - goto inval; } + if ((cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) && + (uref_multi->num_values > HID_MAX_MULTI_USAGES || + uref->usage_index + uref_multi->num_values > field->report_count)) + goto inval; + switch (cmd) { case HIDIOCGUSAGE: uref->value = field->value[uref->usage_index]; -- cgit v1.2.3 From d2bd05d88d245c13b64c3bf9c8927a1c56453d8c Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 24 Jun 2016 03:13:34 -0600 Subject: xen-pciback: return proper values during BAR sizing Reads following writes with all address bits set to 1 should return all changeable address bits as one, not the BAR size (nor, as was the case for the upper half of 64-bit BARs, the high half of the region's end address). Presumably this didn't cause any problems so far because consumers use the value to calculate the size (usually via val & -val), and do nothing else with it. But also consider the exception here: Unimplemented BARs should always return all zeroes. And finally, the check for whether to return the sizing address on read for the ROM BAR should ignore all non-address bits, not just the ROM Enable one. Signed-off-by: Jan Beulich Reviewed-by: Boris Ostrovsky Signed-off-by: David Vrabel --- drivers/xen/xen-pciback/conf_space_header.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/xen-pciback/conf_space_header.c b/drivers/xen/xen-pciback/conf_space_header.c index ad3d17d29c81..9ead1c2ff1dd 100644 --- a/drivers/xen/xen-pciback/conf_space_header.c +++ b/drivers/xen/xen-pciback/conf_space_header.c @@ -145,7 +145,7 @@ static int rom_write(struct pci_dev *dev, int offset, u32 value, void *data) /* A write to obtain the length must happen as a 32-bit write. * This does not (yet) support writing individual bytes */ - if (value == ~PCI_ROM_ADDRESS_ENABLE) + if ((value | ~PCI_ROM_ADDRESS_MASK) == ~0U) bar->which = 1; else { u32 tmpval; @@ -225,38 +225,42 @@ static inline void read_dev_bar(struct pci_dev *dev, (PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64))) { bar_info->val = res[pos - 1].start >> 32; - bar_info->len_val = res[pos - 1].end >> 32; + bar_info->len_val = -resource_size(&res[pos - 1]) >> 32; return; } } + if (!res[pos].flags || + (res[pos].flags & (IORESOURCE_DISABLED | IORESOURCE_UNSET | + IORESOURCE_BUSY))) + return; + bar_info->val = res[pos].start | (res[pos].flags & PCI_REGION_FLAG_MASK); - bar_info->len_val = resource_size(&res[pos]); + bar_info->len_val = -resource_size(&res[pos]) | + (res[pos].flags & PCI_REGION_FLAG_MASK); } static void *bar_init(struct pci_dev *dev, int offset) { - struct pci_bar_info *bar = kmalloc(sizeof(*bar), GFP_KERNEL); + struct pci_bar_info *bar = kzalloc(sizeof(*bar), GFP_KERNEL); if (!bar) return ERR_PTR(-ENOMEM); read_dev_bar(dev, bar, offset, ~0); - bar->which = 0; return bar; } static void *rom_init(struct pci_dev *dev, int offset) { - struct pci_bar_info *bar = kmalloc(sizeof(*bar), GFP_KERNEL); + struct pci_bar_info *bar = kzalloc(sizeof(*bar), GFP_KERNEL); if (!bar) return ERR_PTR(-ENOMEM); read_dev_bar(dev, bar, offset, ~PCI_ROM_ADDRESS_ENABLE); - bar->which = 0; return bar; } -- cgit v1.2.3 From 4995734e973a2c2e9c6f6413cbad9913fc4df0dc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 24 Jun 2016 09:07:39 -0700 Subject: acpi, nfit: fix acpi_check_dsm() vs zero functions implemented QEMU 2.6 implements nascent support for nvdimm DSMs. Depending on configuration it may only implement the function0 dsm to indicate that no other DSMs are available. Commit 31eca76ba2fc "nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism" breaks QEMU, but QEMU is spec compliant. Per the spec the way to indicate that no functions are supported is: If Function Index is zero, the return is a buffer containing one bit for each function index, starting with zero. Bit 0 indicates whether there is support for any functions other than function 0 for the specified UUID and Revision ID. If set to zero, no functions are supported (other than function zero) for the specified UUID and Revision ID. Update the nfit driver to determine the family (interface UUID) without requiring the implementation to define any other functions, i.e. short-circuit acpi_check_dsm() to succeed per the spec. The nfit driver appears to be the only user passing funcs==0 to acpi_check_dsm(), so this behavior change of the common routine should be limited to the probing done by the nfit driver. Cc: Len Brown Cc: Jerry Hoemann Acked-by: "Rafael J. Wysocki" Fixes: 31eca76ba2fc ("nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism") Reported-by: Xiao Guangrong Tested-by: Xiao Guangrong Signed-off-by: Dan Williams --- drivers/acpi/nfit.c | 6 +++--- drivers/acpi/utils.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c index 2215fc847fa9..32579a7b71d5 100644 --- a/drivers/acpi/nfit.c +++ b/drivers/acpi/nfit.c @@ -1131,11 +1131,11 @@ static int acpi_nfit_add_dimm(struct acpi_nfit_desc *acpi_desc, /* * Until standardization materializes we need to consider up to 3 - * different command sets. Note, that checking for function0 (bit0) - * tells us if any commands are reachable through this uuid. + * different command sets. Note, that checking for zero functions + * tells us if any commands might be reachable through this uuid. */ for (i = NVDIMM_FAMILY_INTEL; i <= NVDIMM_FAMILY_HPE2; i++) - if (acpi_check_dsm(adev_dimm->handle, to_nfit_uuid(i), 1, 1)) + if (acpi_check_dsm(adev_dimm->handle, to_nfit_uuid(i), 1, 0)) break; /* limit the supported commands to those that are publicly documented */ diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index 22c09952e177..b4de130f2d57 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -680,9 +680,6 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, u64 rev, u64 funcs) u64 mask = 0; union acpi_object *obj; - if (funcs == 0) - return false; - obj = acpi_evaluate_dsm(handle, uuid, rev, 0, NULL); if (!obj) return false; @@ -695,6 +692,9 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, u64 rev, u64 funcs) mask |= (((u64)obj->buffer.pointer[i]) << (i * 8)); ACPI_FREE(obj); + if (funcs == 0) + return true; + /* * Bit 0 indicates whether there's support for any functions other than * function 0 for the specified UUID and revision. -- cgit v1.2.3 From 32d6bd9059f265f617f6502c68dfbcae7e515add Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Fri, 24 Jun 2016 14:48:47 -0700 Subject: tree wide: get rid of __GFP_REPEAT for order-0 allocations part I This is the third version of the patchset previously sent [1]. I have basically only rebased it on top of 4.7-rc1 tree and dropped "dm: get rid of superfluous gfp flags" which went through dm tree. I am sending it now because it is tree wide and chances for conflicts are reduced considerably when we want to target rc2. I plan to send the next step and rename the flag and move to a better semantic later during this release cycle so we will have a new semantic ready for 4.8 merge window hopefully. Motivation: While working on something unrelated I've checked the current usage of __GFP_REPEAT in the tree. It seems that a majority of the usage is and always has been bogus because __GFP_REPEAT has always been about costly high order allocations while we are using it for order-0 or very small orders very often. It seems that a big pile of them is just a copy&paste when a code has been adopted from one arch to another. I think it makes some sense to get rid of them because they are just making the semantic more unclear. Please note that GFP_REPEAT is documented as * __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt * _might_ fail. This depends upon the particular VM implementation. while !costly requests have basically nofail semantic. So one could reasonably expect that order-0 request with __GFP_REPEAT will not loop for ever. This is not implemented right now though. I would like to move on with __GFP_REPEAT and define a better semantic for it. $ git grep __GFP_REPEAT origin/master | wc -l 111 $ git grep __GFP_REPEAT | wc -l 36 So we are down to the third after this patch series. The remaining places really seem to be relying on __GFP_REPEAT due to large allocation requests. This still needs some double checking which I will do later after all the simple ones are sorted out. I am touching a lot of arch specific code here and I hope I got it right but as a matter of fact I even didn't compile test for some archs as I do not have cross compiler for them. Patches should be quite trivial to review for stupid compile mistakes though. The tricky parts are usually hidden by macro definitions and thats where I would appreciate help from arch maintainers. [1] http://lkml.kernel.org/r/1461849846-27209-1-git-send-email-mhocko@kernel.org This patch (of 19): __GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. Yet we have the full kernel tree with its usage for apparently order-0 allocations. This is really confusing because __GFP_REPEAT is explicitly documented to allow allocation failures which is a weaker semantic than the current order-0 has (basically nofail). Let's simply drop __GFP_REPEAT from those places. This would allow to identify place which really need allocator to retry harder and formulate a more specific semantic for what the flag is supposed to do actually. Link: http://lkml.kernel.org/r/1464599699-30131-2-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko Cc: "David S. Miller" Cc: "H. Peter Anvin" Cc: "James E.J. Bottomley" Cc: "Theodore Ts'o" Cc: Andy Lutomirski Cc: Benjamin Herrenschmidt Cc: Catalin Marinas Cc: Chen Liqin Cc: Chris Metcalf [for tile] Cc: Guan Xuetao Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Jan Kara Cc: John Crispin Cc: Lennox Wu Cc: Ley Foon Tan Cc: Martin Schwidefsky Cc: Matt Fleming Cc: Ralf Baechle Cc: Rich Felker Cc: Russell King Cc: Thomas Gleixner Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/pgalloc.h | 4 ++-- arch/arm/include/asm/pgalloc.h | 2 +- arch/avr32/include/asm/pgalloc.h | 6 +++--- arch/cris/include/asm/pgalloc.h | 4 ++-- arch/frv/mm/pgalloc.c | 6 +++--- arch/hexagon/include/asm/pgalloc.h | 4 ++-- arch/m68k/include/asm/mcf_pgalloc.h | 4 ++-- arch/m68k/include/asm/motorola_pgalloc.h | 4 ++-- arch/m68k/include/asm/sun3_pgalloc.h | 4 ++-- arch/metag/include/asm/pgalloc.h | 5 ++--- arch/microblaze/include/asm/pgalloc.h | 4 ++-- arch/microblaze/mm/pgtable.c | 3 +-- arch/mn10300/mm/pgtable.c | 6 +++--- arch/openrisc/include/asm/pgalloc.h | 2 +- arch/openrisc/mm/ioremap.c | 2 +- arch/parisc/include/asm/pgalloc.h | 4 ++-- arch/powerpc/include/asm/book3s/64/pgalloc.h | 2 +- arch/powerpc/include/asm/nohash/64/pgalloc.h | 2 +- arch/powerpc/mm/pgtable_32.c | 4 ++-- arch/powerpc/mm/pgtable_64.c | 3 +-- arch/sh/include/asm/pgalloc.h | 4 ++-- arch/sparc/mm/init_64.c | 6 ++---- arch/um/kernel/mem.c | 4 ++-- arch/x86/include/asm/pgalloc.h | 4 ++-- arch/x86/xen/p2m.c | 2 +- arch/xtensa/include/asm/pgalloc.h | 2 +- drivers/block/aoe/aoecmd.c | 2 +- 27 files changed, 47 insertions(+), 52 deletions(-) (limited to 'drivers') diff --git a/arch/alpha/include/asm/pgalloc.h b/arch/alpha/include/asm/pgalloc.h index aab14a019c20..c2ebb6f36c9d 100644 --- a/arch/alpha/include/asm/pgalloc.h +++ b/arch/alpha/include/asm/pgalloc.h @@ -40,7 +40,7 @@ pgd_free(struct mm_struct *mm, pgd_t *pgd) static inline pmd_t * pmd_alloc_one(struct mm_struct *mm, unsigned long address) { - pmd_t *ret = (pmd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pmd_t *ret = (pmd_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); return ret; } @@ -53,7 +53,7 @@ pmd_free(struct mm_struct *mm, pmd_t *pmd) static inline pte_t * pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); return pte; } diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h index 19cfab526d13..20febb368844 100644 --- a/arch/arm/include/asm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -29,7 +29,7 @@ static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) { - return (pmd_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT); + return (pmd_t *)get_zeroed_page(GFP_KERNEL); } static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) diff --git a/arch/avr32/include/asm/pgalloc.h b/arch/avr32/include/asm/pgalloc.h index 1aba19d68c5e..db039cb368be 100644 --- a/arch/avr32/include/asm/pgalloc.h +++ b/arch/avr32/include/asm/pgalloc.h @@ -43,7 +43,7 @@ static inline void pgd_ctor(void *x) */ static inline pgd_t *pgd_alloc(struct mm_struct *mm) { - return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor); + return quicklist_alloc(QUICK_PGD, GFP_KERNEL, pgd_ctor); } static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) @@ -54,7 +54,7 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); + return quicklist_alloc(QUICK_PT, GFP_KERNEL, NULL); } static inline pgtable_t pte_alloc_one(struct mm_struct *mm, @@ -63,7 +63,7 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm, struct page *page; void *pg; - pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); + pg = quicklist_alloc(QUICK_PT, GFP_KERNEL, NULL); if (!pg) return NULL; diff --git a/arch/cris/include/asm/pgalloc.h b/arch/cris/include/asm/pgalloc.h index 235ece437ddd..42f1affb9c2d 100644 --- a/arch/cris/include/asm/pgalloc.h +++ b/arch/cris/include/asm/pgalloc.h @@ -24,14 +24,14 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); return pte; } static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) { struct page *pte; - pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); + pte = alloc_pages(GFP_KERNEL|__GFP_ZERO, 0); if (!pte) return NULL; if (!pgtable_page_ctor(pte)) { diff --git a/arch/frv/mm/pgalloc.c b/arch/frv/mm/pgalloc.c index 41907d25ed38..c9ed14f6c67d 100644 --- a/arch/frv/mm/pgalloc.c +++ b/arch/frv/mm/pgalloc.c @@ -22,7 +22,7 @@ pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((aligned(PAGE_SIZE))); pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT); + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL); if (pte) clear_page(pte); return pte; @@ -33,9 +33,9 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) struct page *page; #ifdef CONFIG_HIGHPTE - page = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT, 0); + page = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM, 0); #else - page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0); + page = alloc_pages(GFP_KERNEL, 0); #endif if (!page) return NULL; diff --git a/arch/hexagon/include/asm/pgalloc.h b/arch/hexagon/include/asm/pgalloc.h index 77da3b0ae3c2..eeebf862c46c 100644 --- a/arch/hexagon/include/asm/pgalloc.h +++ b/arch/hexagon/include/asm/pgalloc.h @@ -64,7 +64,7 @@ static inline struct page *pte_alloc_one(struct mm_struct *mm, { struct page *pte; - pte = alloc_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); + pte = alloc_page(GFP_KERNEL | __GFP_ZERO); if (!pte) return NULL; if (!pgtable_page_ctor(pte)) { @@ -78,7 +78,7 @@ static inline struct page *pte_alloc_one(struct mm_struct *mm, static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - gfp_t flags = GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO; + gfp_t flags = GFP_KERNEL | __GFP_ZERO; return (pte_t *) __get_free_page(flags); } diff --git a/arch/m68k/include/asm/mcf_pgalloc.h b/arch/m68k/include/asm/mcf_pgalloc.h index f9924fbcfe42..fb95aed5f428 100644 --- a/arch/m68k/include/asm/mcf_pgalloc.h +++ b/arch/m68k/include/asm/mcf_pgalloc.h @@ -14,7 +14,7 @@ extern const char bad_pmd_string[]; extern inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - unsigned long page = __get_free_page(GFP_DMA|__GFP_REPEAT); + unsigned long page = __get_free_page(GFP_DMA); if (!page) return NULL; @@ -51,7 +51,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page, static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) { - struct page *page = alloc_pages(GFP_DMA|__GFP_REPEAT, 0); + struct page *page = alloc_pages(GFP_DMA, 0); pte_t *pte; if (!page) diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h index 24bcba496c75..c895b987202c 100644 --- a/arch/m68k/include/asm/motorola_pgalloc.h +++ b/arch/m68k/include/asm/motorola_pgalloc.h @@ -11,7 +11,7 @@ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long ad { pte_t *pte; - pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); if (pte) { __flush_page_to_ram(pte); flush_tlb_kernel_page(pte); @@ -32,7 +32,7 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addres struct page *page; pte_t *pte; - page = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); + page = alloc_pages(GFP_KERNEL|__GFP_ZERO, 0); if(!page) return NULL; if (!pgtable_page_ctor(page)) { diff --git a/arch/m68k/include/asm/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h index 0931388de47f..1901f61f926f 100644 --- a/arch/m68k/include/asm/sun3_pgalloc.h +++ b/arch/m68k/include/asm/sun3_pgalloc.h @@ -37,7 +37,7 @@ do { \ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - unsigned long page = __get_free_page(GFP_KERNEL|__GFP_REPEAT); + unsigned long page = __get_free_page(GFP_KERNEL); if (!page) return NULL; @@ -49,7 +49,7 @@ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) { - struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0); + struct page *page = alloc_pages(GFP_KERNEL, 0); if (page == NULL) return NULL; diff --git a/arch/metag/include/asm/pgalloc.h b/arch/metag/include/asm/pgalloc.h index 3104df0a4822..c2caa1ee4360 100644 --- a/arch/metag/include/asm/pgalloc.h +++ b/arch/metag/include/asm/pgalloc.h @@ -42,8 +42,7 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | - __GFP_ZERO); + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO); return pte; } @@ -51,7 +50,7 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) { struct page *pte; - pte = alloc_pages(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO, 0); + pte = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0); if (!pte) return NULL; if (!pgtable_page_ctor(pte)) { diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h index 61436d69775c..7c89390c0c13 100644 --- a/arch/microblaze/include/asm/pgalloc.h +++ b/arch/microblaze/include/asm/pgalloc.h @@ -116,9 +116,9 @@ static inline struct page *pte_alloc_one(struct mm_struct *mm, struct page *ptepage; #ifdef CONFIG_HIGHPTE - int flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT; + int flags = GFP_KERNEL | __GFP_HIGHMEM; #else - int flags = GFP_KERNEL | __GFP_REPEAT; + int flags = GFP_KERNEL; #endif ptepage = alloc_pages(flags, 0); diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c index 4f4520e779a5..eb99fcc76088 100644 --- a/arch/microblaze/mm/pgtable.c +++ b/arch/microblaze/mm/pgtable.c @@ -239,8 +239,7 @@ __init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm, { pte_t *pte; if (mem_init_done) { - pte = (pte_t *)__get_free_page(GFP_KERNEL | - __GFP_REPEAT | __GFP_ZERO); + pte = (pte_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO); } else { pte = (pte_t *)early_get_page(); if (pte) diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c index e77a7c728081..9577cf768875 100644 --- a/arch/mn10300/mm/pgtable.c +++ b/arch/mn10300/mm/pgtable.c @@ -63,7 +63,7 @@ void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags) pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT); + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL); if (pte) clear_page(pte); return pte; @@ -74,9 +74,9 @@ struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) struct page *pte; #ifdef CONFIG_HIGHPTE - pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT, 0); + pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM, 0); #else - pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0); + pte = alloc_pages(GFP_KERNEL, 0); #endif if (!pte) return NULL; diff --git a/arch/openrisc/include/asm/pgalloc.h b/arch/openrisc/include/asm/pgalloc.h index 21484e5b9e9a..87eebd185089 100644 --- a/arch/openrisc/include/asm/pgalloc.h +++ b/arch/openrisc/include/asm/pgalloc.h @@ -77,7 +77,7 @@ static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) { struct page *pte; - pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0); + pte = alloc_pages(GFP_KERNEL, 0); if (!pte) return NULL; clear_page(page_address(pte)); diff --git a/arch/openrisc/mm/ioremap.c b/arch/openrisc/mm/ioremap.c index 62b08ef392be..5b2a95116e8f 100644 --- a/arch/openrisc/mm/ioremap.c +++ b/arch/openrisc/mm/ioremap.c @@ -122,7 +122,7 @@ pte_t __init_refok *pte_alloc_one_kernel(struct mm_struct *mm, pte_t *pte; if (likely(mem_init_done)) { - pte = (pte_t *) __get_free_page(GFP_KERNEL | __GFP_REPEAT); + pte = (pte_t *) __get_free_page(GFP_KERNEL); } else { pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); #if 0 diff --git a/arch/parisc/include/asm/pgalloc.h b/arch/parisc/include/asm/pgalloc.h index f2fd327dce2e..52c3defb40c9 100644 --- a/arch/parisc/include/asm/pgalloc.h +++ b/arch/parisc/include/asm/pgalloc.h @@ -124,7 +124,7 @@ pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) { - struct page *page = alloc_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + struct page *page = alloc_page(GFP_KERNEL|__GFP_ZERO); if (!page) return NULL; if (!pgtable_page_ctor(page)) { @@ -137,7 +137,7 @@ pte_alloc_one(struct mm_struct *mm, unsigned long address) static inline pte_t * pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr) { - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); return pte; } diff --git a/arch/powerpc/include/asm/book3s/64/pgalloc.h b/arch/powerpc/include/asm/book3s/64/pgalloc.h index 488279edb1f0..049b80359db6 100644 --- a/arch/powerpc/include/asm/book3s/64/pgalloc.h +++ b/arch/powerpc/include/asm/book3s/64/pgalloc.h @@ -151,7 +151,7 @@ static inline pgtable_t pmd_pgtable(pmd_t pmd) static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); + return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO); } static inline pgtable_t pte_alloc_one(struct mm_struct *mm, diff --git a/arch/powerpc/include/asm/nohash/64/pgalloc.h b/arch/powerpc/include/asm/nohash/64/pgalloc.h index 069369f6414b..8a8a7d991249 100644 --- a/arch/powerpc/include/asm/nohash/64/pgalloc.h +++ b/arch/powerpc/include/asm/nohash/64/pgalloc.h @@ -88,7 +88,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); + return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO); } static inline pgtable_t pte_alloc_one(struct mm_struct *mm, diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index bf7bf32b54f8..7f922f557936 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -84,7 +84,7 @@ __init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long add pte_t *pte; if (slab_is_available()) { - pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); } else { pte = __va(memblock_alloc(PAGE_SIZE, PAGE_SIZE)); if (pte) @@ -97,7 +97,7 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) { struct page *ptepage; - gfp_t flags = GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO; + gfp_t flags = GFP_KERNEL | __GFP_ZERO; ptepage = alloc_pages(flags, 0); if (!ptepage) diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index e009e0604a8a..f5e8d4edb808 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -350,8 +350,7 @@ static pte_t *get_from_cache(struct mm_struct *mm) static pte_t *__alloc_for_cache(struct mm_struct *mm, int kernel) { void *ret = NULL; - struct page *page = alloc_page(GFP_KERNEL | __GFP_NOTRACK | - __GFP_REPEAT | __GFP_ZERO); + struct page *page = alloc_page(GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO); if (!page) return NULL; if (!kernel && !pgtable_page_ctor(page)) { diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h index a33673b3687d..f3f42c84c40f 100644 --- a/arch/sh/include/asm/pgalloc.h +++ b/arch/sh/include/asm/pgalloc.h @@ -34,7 +34,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); + return quicklist_alloc(QUICK_PT, GFP_KERNEL, NULL); } static inline pgtable_t pte_alloc_one(struct mm_struct *mm, @@ -43,7 +43,7 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm, struct page *page; void *pg; - pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); + pg = quicklist_alloc(QUICK_PT, GFP_KERNEL, NULL); if (!pg) return NULL; page = virt_to_page(pg); diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 14bb0d5ed3c6..aec508e37490 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -2704,8 +2704,7 @@ void __flush_tlb_all(void) pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - struct page *page = alloc_page(GFP_KERNEL | __GFP_NOTRACK | - __GFP_REPEAT | __GFP_ZERO); + struct page *page = alloc_page(GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO); pte_t *pte = NULL; if (page) @@ -2717,8 +2716,7 @@ pte_t *pte_alloc_one_kernel(struct mm_struct *mm, pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) { - struct page *page = alloc_page(GFP_KERNEL | __GFP_NOTRACK | - __GFP_REPEAT | __GFP_ZERO); + struct page *page = alloc_page(GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO); if (!page) return NULL; if (!pgtable_page_ctor(page)) { diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index b2a2dff50b4e..e7437ec62710 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -204,7 +204,7 @@ pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { pte_t *pte; - pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); return pte; } @@ -212,7 +212,7 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) { struct page *pte; - pte = alloc_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pte = alloc_page(GFP_KERNEL|__GFP_ZERO); if (!pte) return NULL; if (!pgtable_page_ctor(pte)) { diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h index bf7f8b55b0f9..574c23cf761a 100644 --- a/arch/x86/include/asm/pgalloc.h +++ b/arch/x86/include/asm/pgalloc.h @@ -81,7 +81,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) { struct page *page; - page = alloc_pages(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO, 0); + page = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0); if (!page) return NULL; if (!pgtable_pmd_page_ctor(page)) { @@ -125,7 +125,7 @@ static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud) static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) { - return (pud_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT); + return (pud_t *)get_zeroed_page(GFP_KERNEL); } static inline void pud_free(struct mm_struct *mm, pud_t *pud) diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index cab9f766bb06..dd2a49a8aacc 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -182,7 +182,7 @@ static void * __ref alloc_p2m_page(void) if (unlikely(!slab_is_available())) return alloc_bootmem_align(PAGE_SIZE, PAGE_SIZE); - return (void *)__get_free_page(GFP_KERNEL | __GFP_REPEAT); + return (void *)__get_free_page(GFP_KERNEL); } static void __ref free_p2m_page(void *p) diff --git a/arch/xtensa/include/asm/pgalloc.h b/arch/xtensa/include/asm/pgalloc.h index d38eb9237e64..1065bc8bcae5 100644 --- a/arch/xtensa/include/asm/pgalloc.h +++ b/arch/xtensa/include/asm/pgalloc.h @@ -44,7 +44,7 @@ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, pte_t *ptep; int i; - ptep = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT); + ptep = (pte_t *)__get_free_page(GFP_KERNEL); if (!ptep) return NULL; for (i = 0; i < 1024; i++) diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index d597e432e195..ab19adb07a12 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -1750,7 +1750,7 @@ aoecmd_init(void) int ret; /* get_zeroed_page returns page with ref count 1 */ - p = (void *) get_zeroed_page(GFP_KERNEL | __GFP_REPEAT); + p = (void *) get_zeroed_page(GFP_KERNEL); if (!p) return -ENOMEM; empty_page = virt_to_page(p); -- cgit v1.2.3 From 1b45996d2ebf9680ccd0db875fc668aa025f40fd Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 17 May 2016 11:41:04 -0700 Subject: tty: vt: Fix soft lockup in fbcon cursor blink timer. We are getting somewhat random soft lockups with this signature: [ 86.992215] [] el1_irq+0xa0/0x10c [ 86.997082] [] cursor_timer_handler+0x30/0x54 [ 87.002991] [] call_timer_fn+0x54/0x1a8 [ 87.008378] [] run_timer_softirq+0x1c4/0x2bc [ 87.014200] [] __do_softirq+0x114/0x344 [ 87.019590] [] irq_exit+0x74/0x98 [ 87.024458] [] __handle_domain_irq+0x98/0xfc [ 87.030278] [] gic_handle_irq+0x94/0x190 This is caused by the vt visual_init() function calling into fbcon_init() with a vc_cur_blink_ms value of zero. This is a transient condition, as it is later set to a non-zero value. But, if the timer happens to expire while the blink rate is zero, it goes into an endless loop, and we get soft lockup. The fix is to initialize vc_cur_blink_ms before calling the con_init() function. Signed-off-by: David Daney Cc: stable@vger.kernel.org Acked-by: Pavel Machek Tested-by: Ming Lei Acked-by: Scot Doyle Tested-by: Henrique de Moraes Holschuh Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index dc125322f48f..5b0fe97c46ca 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -750,6 +750,7 @@ static void visual_init(struct vc_data *vc, int num, int init) vc->vc_complement_mask = 0; vc->vc_can_do_color = 0; vc->vc_panic_force_write = false; + vc->vc_cur_blink_ms = DEFAULT_CURSOR_BLINK_MS; vc->vc_sw->con_init(vc, init); if (!vc->vc_complement_mask) vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800; -- cgit v1.2.3 From ef3149eb3ddb7f9125e11c90f8330e371b55cffd Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Wed, 22 Jun 2016 20:43:30 +0100 Subject: staging: iio: accel: fix error check sca3000_read_ctrl_reg() returns a negative number on failure, check for this instead of zero. Signed-off-by: Luis de Bethencourt Cc: Signed-off-by: Jonathan Cameron --- drivers/staging/iio/accel/sca3000_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c index a8f533af9eca..ec12181822e6 100644 --- a/drivers/staging/iio/accel/sca3000_core.c +++ b/drivers/staging/iio/accel/sca3000_core.c @@ -594,7 +594,7 @@ static ssize_t sca3000_read_frequency(struct device *dev, goto error_ret_mut; ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL); mutex_unlock(&st->lock); - if (ret) + if (ret < 0) goto error_ret; val = ret; if (base_freq > 0) -- cgit v1.2.3 From 0c1f91b98552da49d9d8eed32b3132a58d2f4598 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 17 Jun 2016 15:22:24 +0200 Subject: iio: accel: kxsd9: fix the usage of spi_w8r8() These two spi_w8r8() calls return a value with is used by the code following the error check. The dubious use was caused by a cleanup patch. Fixes: d34dbee8ac8e ("staging:iio:accel:kxsd9 cleanup and conversion to iio_chan_spec.") Signed-off-by: Linus Walleij Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/kxsd9.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c index 923f56598d4b..3a9f106787d2 100644 --- a/drivers/iio/accel/kxsd9.c +++ b/drivers/iio/accel/kxsd9.c @@ -81,7 +81,7 @@ static int kxsd9_write_scale(struct iio_dev *indio_dev, int micro) mutex_lock(&st->buf_lock); ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C)); - if (ret) + if (ret < 0) goto error_ret; st->tx[0] = KXSD9_WRITE(KXSD9_REG_CTRL_C); st->tx[1] = (ret & ~KXSD9_FS_MASK) | i; @@ -163,7 +163,7 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev, break; case IIO_CHAN_INFO_SCALE: ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C)); - if (ret) + if (ret < 0) goto error_ret; *val2 = kxsd9_micro_scales[ret & KXSD9_FS_MASK]; ret = IIO_VAL_INT_PLUS_MICRO; -- cgit v1.2.3 From 6b7f4e25f3309f106a5c7ff42c8231494cf285d3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Jun 2016 13:53:32 +0100 Subject: iio:ad7266: Fix broken regulator error handling All regulator_get() variants return either a pointer to a regulator or an ERR_PTR() so testing for NULL makes no sense and may lead to bugs if we use NULL as a valid regulator. Fix this by using IS_ERR() as expected. Signed-off-by: Mark Brown Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7266.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c index 21e19b60e2b9..835d45db258f 100644 --- a/drivers/iio/adc/ad7266.c +++ b/drivers/iio/adc/ad7266.c @@ -397,7 +397,7 @@ static int ad7266_probe(struct spi_device *spi) st = iio_priv(indio_dev); st->reg = devm_regulator_get(&spi->dev, "vref"); - if (!IS_ERR_OR_NULL(st->reg)) { + if (!IS_ERR(st->reg)) { ret = regulator_enable(st->reg); if (ret) return ret; -- cgit v1.2.3 From e5511c816e5ac4909bdd38e85ac344e2b9b8e984 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Jun 2016 13:53:33 +0100 Subject: iio:ad7266: Fix support for optional regulators The ad7266 driver attempts to support deciding between the use of internal and external power supplies by checking to see if an error is returned when requesting the regulator. This doesn't work with the current code since the driver uses a normal regulator_get() which is for non-optional supplies and so assumes that if a regulator is not provided by the platform then this is a bug in the platform integration and so substitutes a dummy regulator. Use regulator_get_optional() instead which indicates to the framework that the regulator may be absent and provides a dummy regulator instead. Signed-off-by: Mark Brown Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7266.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c index 835d45db258f..655b36b4e9cb 100644 --- a/drivers/iio/adc/ad7266.c +++ b/drivers/iio/adc/ad7266.c @@ -396,7 +396,7 @@ static int ad7266_probe(struct spi_device *spi) st = iio_priv(indio_dev); - st->reg = devm_regulator_get(&spi->dev, "vref"); + st->reg = devm_regulator_get_optional(&spi->dev, "vref"); if (!IS_ERR(st->reg)) { ret = regulator_enable(st->reg); if (ret) -- cgit v1.2.3 From 68b356eb3d9f5e38910fb62e22a78e2a18d544ae Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Jun 2016 13:53:34 +0100 Subject: iio:ad7266: Fix probe deferral for vref Currently the ad7266 driver treats any failure to get vref as though the regulator were not present but this means that if probe deferral is triggered the driver will act as though the regulator were not present. Instead only use the internal reference if we explicitly got -ENODEV which is what is returned for absent regulators. Signed-off-by: Mark Brown Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7266.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c index 655b36b4e9cb..2123f0ac2e2a 100644 --- a/drivers/iio/adc/ad7266.c +++ b/drivers/iio/adc/ad7266.c @@ -408,6 +408,9 @@ static int ad7266_probe(struct spi_device *spi) st->vref_mv = ret / 1000; } else { + /* Any other error indicates that the regulator does exist */ + if (PTR_ERR(st->reg) != -ENODEV) + return PTR_ERR(st->reg); /* Use internal reference */ st->vref_mv = 2500; } -- cgit v1.2.3 From 5353ed8deedee9e5acb9f896e9032158f5d998de Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 20 Jun 2016 15:40:27 +0100 Subject: devpts: fix null pointer dereference on failed memory allocation An ENOMEM when creating a pair tty in tty_ldisc_setup causes a null pointer dereference in devpts_kill_index because tty->link->driver_data is NULL. The oops was triggered with the pty stressor in stress-ng when in a low memory condition. tty_init_dev tries to clean up a tty_ldisc_setup ENOMEM error by calling release_tty, however, this ultimately tries to clean up the NULL pair'd tty in pty_unix98_remove, triggering the Oops. Add check to pty_unix98_remove to only clean up fsi if it is not NULL. Ooops: [ 23.020961] Oops: 0000 [#1] SMP [ 23.020976] Modules linked in: ppdev snd_hda_codec_generic snd_hda_intel snd_hda_codec parport_pc snd_hda_core snd_hwdep parport snd_pcm input_leds joydev snd_timer serio_raw snd soundcore i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel qxl aes_x86_64 ttm lrw gf128mul glue_helper ablk_helper drm_kms_helper cryptd syscopyarea sysfillrect psmouse sysimgblt floppy fb_sys_fops drm pata_acpi jitterentropy_rng drbg ansi_cprng [ 23.020978] CPU: 0 PID: 1452 Comm: stress-ng-pty Not tainted 4.7.0-rc4+ #2 [ 23.020978] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 23.020979] task: ffff88007ba30000 ti: ffff880078ea8000 task.ti: ffff880078ea8000 [ 23.020981] RIP: 0010:[] [] ida_remove+0x1f/0x120 [ 23.020981] RSP: 0018:ffff880078eabb60 EFLAGS: 00010a03 [ 23.020982] RAX: 4444444444444567 RBX: 0000000000000000 RCX: 000000000000001f [ 23.020982] RDX: 000000000000014c RSI: 000000000000026f RDI: 0000000000000000 [ 23.020982] RBP: ffff880078eabb70 R08: 0000000000000004 R09: 0000000000000036 [ 23.020983] R10: 000000000000026f R11: 0000000000000000 R12: 000000000000026f [ 23.020983] R13: 000000000000026f R14: ffff88007c944b40 R15: 000000000000026f [ 23.020984] FS: 00007f9a2f3cc700(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 [ 23.020984] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.020985] CR2: 0000000000000010 CR3: 000000006c81b000 CR4: 00000000001406f0 [ 23.020988] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.020988] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.020988] Stack: [ 23.020989] 0000000000000000 000000000000026f ffff880078eabb90 ffffffff812a5a99 [ 23.020990] 0000000000000000 00000000fffffff4 ffff880078eabba8 ffffffff814f9cbe [ 23.020991] ffff88007965c800 ffff880078eabbc8 ffffffff814eef43 fffffffffffffff4 [ 23.020991] Call Trace: [ 23.021000] [] devpts_kill_index+0x29/0x50 [ 23.021002] [] pty_unix98_remove+0x2e/0x50 [ 23.021006] [] release_tty+0xb3/0x1b0 [ 23.021007] [] tty_init_dev+0xd4/0x1c0 [ 23.021011] [] ptmx_open+0xae/0x190 [ 23.021013] [] chrdev_open+0xbf/0x1b0 [ 23.021015] [] do_dentry_open+0x203/0x310 [ 23.021016] [] ? cdev_put+0x30/0x30 [ 23.021017] [] vfs_open+0x54/0x80 [ 23.021018] [] ? may_open+0x8c/0x100 [ 23.021019] [] path_openat+0x2eb/0x1440 [ 23.021020] [] ? putname+0x54/0x60 [ 23.021022] [] ? n_tty_ioctl_helper+0x27/0x100 [ 23.021023] [] do_filp_open+0x91/0x100 [ 23.021024] [] ? getname_flags+0x56/0x1f0 [ 23.021026] [] ? __alloc_fd+0x46/0x190 [ 23.021027] [] do_sys_open+0x124/0x210 [ 23.021028] [] SyS_open+0x1e/0x20 [ 23.021035] [] entry_SYSCALL_64_fastpath+0x1e/0xa8 [ 23.021044] Code: 63 28 45 31 e4 eb dd 0f 1f 44 00 00 55 4c 63 d6 48 ba 89 88 88 88 88 88 88 88 4c 89 d0 b9 1f 00 00 00 48 f7 e2 48 89 e5 41 54 53 <8b> 47 10 48 89 fb 8d 3c c5 00 00 00 00 48 c1 ea 09 b8 01 00 00 [ 23.021045] RIP [] ida_remove+0x1f/0x120 [ 23.021045] RSP [ 23.021046] CR2: 0000000000000010 Signed-off-by: Colin Ian King Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/pty.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index f856c4544eea..51e0d32883ba 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -667,8 +667,11 @@ static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) fsi = tty->driver_data; else fsi = tty->link->driver_data; - devpts_kill_index(fsi, tty->index); - devpts_release(fsi); + + if (fsi) { + devpts_kill_index(fsi, tty->index); + devpts_release(fsi); + } } static const struct tty_operations ptm_unix98_ops = { -- cgit v1.2.3 From a37503bc387ce2434106d4bf4870bd73081c7355 Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Wed, 22 Jun 2016 12:40:50 -0500 Subject: net: smsc911x: Fix bug where PHY interrupts are overwritten by 0 By default, mdiobus_alloc() sets the PHYs to polling mode, but a pointer size memcpy means that a couple IRQs end up being overwritten with a value of 0. This means that PHY_POLL is disabled and results in unpredictable behavior depending on the PHY's location on the MDIO bus. Remove that memcpy and the now unused phy_irq member to force the SMSC911x PHYs into polling mode 100% of the time. Fixes: e7f4dc3536a4 ("mdio: Move allocation of interrupts into core") Signed-off-by: Jeremy Linton Reviewed-by: Andrew Lunn Acked-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 8af25563f627..b5ab5e120bca 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -116,7 +116,6 @@ struct smsc911x_data { struct phy_device *phy_dev; struct mii_bus *mii_bus; - int phy_irq[PHY_MAX_ADDR]; unsigned int using_extphy; int last_duplex; int last_carrier; @@ -1073,7 +1072,6 @@ static int smsc911x_mii_init(struct platform_device *pdev, pdata->mii_bus->priv = pdata; pdata->mii_bus->read = smsc911x_mii_read; pdata->mii_bus->write = smsc911x_mii_write; - memcpy(pdata->mii_bus->irq, pdata->phy_irq, sizeof(pdata->mii_bus)); pdata->mii_bus->parent = &pdev->dev; -- cgit v1.2.3 From 583248e6620a4726093295e2d6785fcbc2e86428 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 1 Jun 2016 12:10:08 +0100 Subject: iommu/iova: Disable preemption around use of this_cpu_ptr() Between acquiring the this_cpu_ptr() and using it, ideally we don't want to be preempted and work on another CPU's private data. this_cpu_ptr() checks whether or not preemption is disable, and get_cpu_ptr() provides a convenient wrapper for operating on the cpu ptr inside a preemption disabled critical section (which currently is provided by the spinlock). [ 167.997877] BUG: using smp_processor_id() in preemptible [00000000] code: usb-storage/216 [ 167.997940] caller is debug_smp_processor_id+0x17/0x20 [ 167.997945] CPU: 7 PID: 216 Comm: usb-storage Tainted: G U 4.7.0-rc1-gfxbench-RO_Patchwork_1057+ #1 [ 167.997948] Hardware name: Hewlett-Packard HP Pro 3500 Series/2ABF, BIOS 8.11 10/24/2012 [ 167.997951] 0000000000000000 ffff880118b7f9c8 ffffffff8140dca5 0000000000000007 [ 167.997958] ffffffff81a3a7e9 ffff880118b7f9f8 ffffffff8142a927 0000000000000000 [ 167.997965] ffff8800d499ed58 0000000000000001 00000000000fffff ffff880118b7fa08 [ 167.997971] Call Trace: [ 167.997977] [] dump_stack+0x67/0x92 [ 167.997981] [] check_preemption_disabled+0xd7/0xe0 [ 167.997985] [] debug_smp_processor_id+0x17/0x20 [ 167.997990] [] alloc_iova_fast+0xb7/0x210 [ 167.997994] [] intel_alloc_iova+0x7f/0xd0 [ 167.997998] [] intel_map_sg+0xbd/0x240 [ 167.998002] [] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 167.998009] [] usb_hcd_map_urb_for_dma+0x4b9/0x5a0 [ 167.998013] [] usb_hcd_submit_urb+0xe9/0xaa0 [ 167.998017] [] ? mark_held_locks+0x6f/0xa0 [ 167.998022] [] ? __raw_spin_lock_init+0x1c/0x50 [ 167.998025] [] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 167.998028] [] usb_submit_urb+0x3f3/0x5a0 [ 167.998032] [] ? trace_hardirqs_on_caller+0x122/0x1b0 [ 167.998035] [] usb_sg_wait+0x67/0x150 [ 167.998039] [] usb_stor_bulk_transfer_sglist.part.3+0x82/0xd0 [ 167.998042] [] usb_stor_bulk_srb+0x4c/0x60 [ 167.998045] [] usb_stor_Bulk_transport+0x17e/0x420 [ 167.998049] [] usb_stor_invoke_transport+0x242/0x540 [ 167.998052] [] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 167.998058] [] usb_stor_transparent_scsi_command+0x9/0x10 [ 167.998061] [] usb_stor_control_thread+0x158/0x260 [ 167.998064] [] ? fill_inquiry_response+0x20/0x20 [ 167.998067] [] ? fill_inquiry_response+0x20/0x20 [ 167.998071] [] kthread+0xea/0x100 [ 167.998078] [] ret_from_fork+0x1f/0x40 [ 167.998081] [] ? kthread_create_on_node+0x1f0/0x1f0 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96293 Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Joerg Roedel Cc: iommu@lists.linux-foundation.org Cc: linux-kernel@vger.kernel.org Fixes: 9257b4a206fc ('iommu/iova: introduce per-cpu caching to iova allocation') Signed-off-by: Joerg Roedel --- drivers/iommu/iova.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c index ba764a0835d3..e23001bfcfee 100644 --- a/drivers/iommu/iova.c +++ b/drivers/iommu/iova.c @@ -420,8 +420,10 @@ retry: /* Try replenishing IOVAs by flushing rcache. */ flushed_rcache = true; + preempt_disable(); for_each_online_cpu(cpu) free_cpu_cached_iovas(cpu, iovad); + preempt_enable(); goto retry; } @@ -749,7 +751,7 @@ static bool __iova_rcache_insert(struct iova_domain *iovad, bool can_insert = false; unsigned long flags; - cpu_rcache = this_cpu_ptr(rcache->cpu_rcaches); + cpu_rcache = get_cpu_ptr(rcache->cpu_rcaches); spin_lock_irqsave(&cpu_rcache->lock, flags); if (!iova_magazine_full(cpu_rcache->loaded)) { @@ -779,6 +781,7 @@ static bool __iova_rcache_insert(struct iova_domain *iovad, iova_magazine_push(cpu_rcache->loaded, iova_pfn); spin_unlock_irqrestore(&cpu_rcache->lock, flags); + put_cpu_ptr(rcache->cpu_rcaches); if (mag_to_free) { iova_magazine_free_pfns(mag_to_free, iovad); @@ -812,7 +815,7 @@ static unsigned long __iova_rcache_get(struct iova_rcache *rcache, bool has_pfn = false; unsigned long flags; - cpu_rcache = this_cpu_ptr(rcache->cpu_rcaches); + cpu_rcache = get_cpu_ptr(rcache->cpu_rcaches); spin_lock_irqsave(&cpu_rcache->lock, flags); if (!iova_magazine_empty(cpu_rcache->loaded)) { @@ -834,6 +837,7 @@ static unsigned long __iova_rcache_get(struct iova_rcache *rcache, iova_pfn = iova_magazine_pop(cpu_rcache->loaded, limit_pfn); spin_unlock_irqrestore(&cpu_rcache->lock, flags); + put_cpu_ptr(rcache->cpu_rcaches); return iova_pfn; } -- cgit v1.2.3 From 3bd4f9112f87a9c65fe6e817272806167f0bc9ed Mon Sep 17 00:00:00 2001 From: Jan Niehusmann Date: Mon, 6 Jun 2016 14:20:11 +0200 Subject: iommu/vt-d: Fix overflow of iommu->domains array The valid range of 'did' in get_iommu_domain(*iommu, did) is 0..cap_ndoms(iommu->cap), so don't exceed that range in free_all_cpu_cached_iovas(). The user-visible impact of the out-of-bounds access is the machine hanging on suspend-to-ram. It is, in fact, a kernel panic, but due to already suspended devices, that's often not visible to the user. Fixes: 22e2f9fa63b0 ("iommu/vt-d: Use per-cpu IOVA caching") Signed-off-by: Jan Niehusmann Tested-By: Marius Vlad Signed-off-by: Joerg Roedel --- drivers/iommu/intel-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index 10700945994e..cfe410eedaf0 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -4607,7 +4607,7 @@ static void free_all_cpu_cached_iovas(unsigned int cpu) if (!iommu) continue; - for (did = 0; did < 0xffff; did++) { + for (did = 0; did < cap_ndoms(iommu->cap); did++) { domain = get_iommu_domain(iommu, did); if (!domain) -- cgit v1.2.3 From 6082ee72e9d89e80a664418be06f47d728243e85 Mon Sep 17 00:00:00 2001 From: Nicolas Iooss Date: Sun, 26 Jun 2016 10:33:29 +0200 Subject: iommu/amd: Initialize devid variable before using it Commit 2a0cb4e2d423 ("iommu/amd: Add new map for storing IVHD dev entry type HID") added a call to DUMP_printk in init_iommu_from_acpi() which used the value of devid before this variable was initialized. Fixes: 2a0cb4e2d423 ('iommu/amd: Add new map for storing IVHD dev entry type HID') Signed-off-by: Nicolas Iooss Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index 9e0034196e10..d091defc3426 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -1107,13 +1107,13 @@ static int __init init_iommu_from_acpi(struct amd_iommu *iommu, break; } + devid = e->devid; DUMP_printk(" DEV_ACPI_HID(%s[%s])\t\tdevid: %02x:%02x.%x\n", hid, uid, PCI_BUS_NUM(devid), PCI_SLOT(devid), PCI_FUNC(devid)); - devid = e->devid; flags = e->flags; ret = add_acpi_hid_device(hid, uid, &devid, false); -- cgit v1.2.3 From ab2a4bf83902c170d29ba130a8abb5f9d90559e1 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 27 Jun 2016 10:23:10 -0400 Subject: USB: don't free bandwidth_mutex too early The USB core contains a bug that can show up when a USB-3 host controller is removed. If the primary (USB-2) hcd structure is released before the shared (USB-3) hcd, the core will try to do a double-free of the common bandwidth_mutex. The problem was described in graphical form by Chung-Geol Kim, who first reported it: ================================================= At *remove USB(3.0) Storage sequence <1> --> <5> ((Problem Case)) ================================================= VOLD ------------------------------------|------------ (uevent) ________|_________ |<1> | |dwc3_otg_sm_work | |usb_put_hcd | |peer_hcd(kref=2)| |__________________| ________|_________ |<2> | |New USB BUS #2 | | | |peer_hcd(kref=1) | | | --(Link)-bandXX_mutex| | |__________________| | ___________________ | |<3> | | |dwc3_otg_sm_work | | |usb_put_hcd | | |primary_hcd(kref=1)| | |___________________| | _________|_________ | |<4> | | |New USB BUS #1 | | |hcd_release | | |primary_hcd(kref=0)| | | | | |bandXX_mutex(free) |<- |___________________| (( VOLD )) ______|___________ |<5> | | SCSI | |usb_put_hcd | |peer_hcd(kref=0) | |*hcd_release | |bandXX_mutex(free*)|<- double free |__________________| ================================================= This happens because hcd_release() frees the bandwidth_mutex whenever it sees a primary hcd being released (which is not a very good idea in any case), but in the course of releasing the primary hcd, it changes the pointers in the shared hcd in such a way that the shared hcd will appear to be primary when it gets released. This patch fixes the problem by changing hcd_release() so that it deallocates the bandwidth_mutex only when the _last_ hcd structure referencing it is released. The patch also removes an unnecessary test, so that when an hcd is released, both the shared_hcd and primary_hcd pointers in the hcd's peer will be cleared. Signed-off-by: Alan Stern Reported-by: Chung-Geol Kim Tested-by: Chung-Geol Kim CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 34b837ae1ed7..d2e3f655c26f 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2598,26 +2598,23 @@ EXPORT_SYMBOL_GPL(usb_create_hcd); * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is * deallocated. * - * Make sure to only deallocate the bandwidth_mutex when the primary HCD is - * freed. When hcd_release() is called for either hcd in a peer set - * invalidate the peer's ->shared_hcd and ->primary_hcd pointers to - * block new peering attempts + * Make sure to deallocate the bandwidth_mutex only when the last HCD is + * freed. When hcd_release() is called for either hcd in a peer set, + * invalidate the peer's ->shared_hcd and ->primary_hcd pointers. */ static void hcd_release(struct kref *kref) { struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref); mutex_lock(&usb_port_peer_mutex); - if (usb_hcd_is_primary_hcd(hcd)) { - kfree(hcd->address0_mutex); - kfree(hcd->bandwidth_mutex); - } if (hcd->shared_hcd) { struct usb_hcd *peer = hcd->shared_hcd; peer->shared_hcd = NULL; - if (peer->primary_hcd == hcd) - peer->primary_hcd = NULL; + peer->primary_hcd = NULL; + } else { + kfree(hcd->address0_mutex); + kfree(hcd->bandwidth_mutex); } mutex_unlock(&usb_port_peer_mutex); kfree(hcd); -- cgit v1.2.3 From 5ab666e09541e64ce2fd73411c3b5b9e4ad334b1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 27 Jun 2016 23:47:15 +0200 Subject: intel_pstate: Do not clear utilization update hooks on policy changes intel_pstate_set_policy() is invoked by the cpufreq core during driver initialization, on changes of policy attributes (minimim and maximum frequency, for example) via sysfs and via CPU notifications from the platform firmware. On some platforms the latter may occur relatively often. Commit bb6ab52f2bef (intel_pstate: Do not set utilization update hook too early) made intel_pstate_set_policy() clear the CPU's utilization update hook before updating the policy attributes for it (and set the hook again after doind that), but that involves invoking synchronize_sched() and adds overhead to the CPU notifications mentioned above and to the sched-RCU handling in general. That extra overhead is arguably not necessary, because updating policy attributes when the CPU's utilization update hook is active should not lead to any adverse effects, so drop the clearing of the hook from intel_pstate_set_policy() and make it check if the hook has been set already when attempting to set it. Fixes: bb6ab52f2bef (intel_pstate: Do not set utilization update hook too early) Reported-by: Jisheng Zhang Tested-by: Jisheng Zhang Tested-by: Doug Smythies Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index fe9dc17ea873..1fa1a32928d7 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -1400,6 +1400,9 @@ static void intel_pstate_set_update_util_hook(unsigned int cpu_num) { struct cpudata *cpu = all_cpu_data[cpu_num]; + if (cpu->update_util_set) + return; + /* Prevent intel_pstate_update_util() from using stale data. */ cpu->sample.time = 0; cpufreq_add_update_util_hook(cpu_num, &cpu->update_util, @@ -1440,8 +1443,6 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) if (!policy->cpuinfo.max_freq) return -ENODEV; - intel_pstate_clear_update_util_hook(policy->cpu); - pr_debug("set_policy cpuinfo.max %u policy->max %u\n", policy->cpuinfo.max_freq, policy->max); -- cgit v1.2.3 From ca5eda5d3db6026080cff267459625c87c43e9ab Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 27 Jun 2016 14:50:13 +0900 Subject: cpufreq: dt: call of_node_put() before error out If of_match_node() fails, this init function bails out without calling of_node_put(). Also change of_node_put(of_root) to of_node_put(np); both of them hold the same pointer, but it seems better to call of_node_put() against the node returned by of_find_node_by_path(). Signed-off-by: Masahiro Yamada Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq-dt-platdev.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index 3646b143bbf5..0bb44d5b5df4 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -79,15 +79,16 @@ static const struct of_device_id machines[] __initconst = { static int __init cpufreq_dt_platdev_init(void) { struct device_node *np = of_find_node_by_path("/"); + const struct of_device_id *match; if (!np) return -ENODEV; - if (!of_match_node(machines, np)) + match = of_match_node(machines, np); + of_node_put(np); + if (!match) return -ENODEV; - of_node_put(of_root); - return PTR_ERR_OR_ZERO(platform_device_register_simple("cpufreq-dt", -1, NULL, 0)); } -- cgit v1.2.3 From 742c87bf27d3b715820da6f8a81d6357adbf18f8 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 28 Jun 2016 03:29:29 +0200 Subject: cpufreq: Avoid false-positive WARN_ON()s in cpufreq_update_policy() CPU notifications from the firmware coming in when cpufreq is suspended cause cpufreq_update_current_freq() to return 0 which triggers the WARN_ON() in cpufreq_update_policy() for no reason. Avoid that by checking cpufreq_suspended before calling cpufreq_update_current_freq(). Fixes: c9d9c929e674 (cpufreq: Abort cpufreq_update_current_freq() for cpufreq_suspended set) Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar Cc: 4.6+ # 4.6+ --- drivers/cpufreq/cpufreq.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 9009295f5134..5617c7087d77 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -2261,6 +2261,10 @@ int cpufreq_update_policy(unsigned int cpu) * -> ask driver for current freq and notify governors about a change */ if (cpufreq_driver->get && !cpufreq_driver->setpolicy) { + if (cpufreq_suspended) { + ret = -EAGAIN; + goto unlock; + } new_policy.cur = cpufreq_update_current_freq(policy); if (WARN_ON(!new_policy.cur)) { ret = -EIO; -- cgit v1.2.3 From 0622cab0341cac6b30da177b0faa39fae0680e71 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Thu, 23 Jun 2016 14:20:51 -0700 Subject: bonding: fix 802.3ad aggregator reselection Since commit 7bb11dc9f59d ("bonding: unify all places where actor-oper key needs to be updated."), the logic in bonding to handle selection between multiple aggregators has not functioned. This affects only configurations wherein the bonding slaves connect to two discrete aggregators (e.g., two independent switches, each with LACP enabled), thus creating two separate aggregation groups within a single bond. The cause is a change in 7bb11dc9f59d to no longer set AD_PORT_BEGIN on a port after a link state change, which would cause the port to be reselected for attachment to an aggregator as if were newly added to the bond. We cannot restore the prior behavior, as it contradicts IEEE 802.1AX 5.4.12, which requires ports that "become inoperable" (lose carrier, setting port_enabled=false as per 802.1AX 5.4.7) to remain selected (i.e., assigned to the aggregator). As the port now remains selected, the aggregator selection logic is not invoked. A side effect of this change is that aggregators in bonding will now contain ports that are link down. The aggregator selection logic does not currently handle this situation correctly, causing incorrect aggregator selection. This patch makes two changes to repair the aggregator selection logic in bonding to function as documented and within the confines of the standard: First, the aggregator selection and related logic now utilizes the number of active ports per aggregator, not the number of selected ports (as some selected ports may be down). The ad_select "bandwidth" and "count" options only consider ports that are link up. Second, on any carrier state change of any slave, the aggregator selection logic is explicitly called to insure the correct aggregator is active. Reported-by: Veli-Matti Lintu Fixes: 7bb11dc9f59d ("bonding: unify all places where actor-oper key needs to be updated.") Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 64 +++++++++++++++++++++++++++++------------- 1 file changed, 45 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index b9304a295f86..ca81f46ea1aa 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -657,6 +657,20 @@ static void __set_agg_ports_ready(struct aggregator *aggregator, int val) } } +static int __agg_active_ports(struct aggregator *agg) +{ + struct port *port; + int active = 0; + + for (port = agg->lag_ports; port; + port = port->next_port_in_aggregator) { + if (port->is_enabled) + active++; + } + + return active; +} + /** * __get_agg_bandwidth - get the total bandwidth of an aggregator * @aggregator: the aggregator we're looking at @@ -664,39 +678,40 @@ static void __set_agg_ports_ready(struct aggregator *aggregator, int val) */ static u32 __get_agg_bandwidth(struct aggregator *aggregator) { + int nports = __agg_active_ports(aggregator); u32 bandwidth = 0; - if (aggregator->num_of_ports) { + if (nports) { switch (__get_link_speed(aggregator->lag_ports)) { case AD_LINK_SPEED_1MBPS: - bandwidth = aggregator->num_of_ports; + bandwidth = nports; break; case AD_LINK_SPEED_10MBPS: - bandwidth = aggregator->num_of_ports * 10; + bandwidth = nports * 10; break; case AD_LINK_SPEED_100MBPS: - bandwidth = aggregator->num_of_ports * 100; + bandwidth = nports * 100; break; case AD_LINK_SPEED_1000MBPS: - bandwidth = aggregator->num_of_ports * 1000; + bandwidth = nports * 1000; break; case AD_LINK_SPEED_2500MBPS: - bandwidth = aggregator->num_of_ports * 2500; + bandwidth = nports * 2500; break; case AD_LINK_SPEED_10000MBPS: - bandwidth = aggregator->num_of_ports * 10000; + bandwidth = nports * 10000; break; case AD_LINK_SPEED_20000MBPS: - bandwidth = aggregator->num_of_ports * 20000; + bandwidth = nports * 20000; break; case AD_LINK_SPEED_40000MBPS: - bandwidth = aggregator->num_of_ports * 40000; + bandwidth = nports * 40000; break; case AD_LINK_SPEED_56000MBPS: - bandwidth = aggregator->num_of_ports * 56000; + bandwidth = nports * 56000; break; case AD_LINK_SPEED_100000MBPS: - bandwidth = aggregator->num_of_ports * 100000; + bandwidth = nports * 100000; break; default: bandwidth = 0; /* to silence the compiler */ @@ -1530,10 +1545,10 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best, switch (__get_agg_selection_mode(curr->lag_ports)) { case BOND_AD_COUNT: - if (curr->num_of_ports > best->num_of_ports) + if (__agg_active_ports(curr) > __agg_active_ports(best)) return curr; - if (curr->num_of_ports < best->num_of_ports) + if (__agg_active_ports(curr) < __agg_active_ports(best)) return best; /*FALLTHROUGH*/ @@ -1561,8 +1576,14 @@ static int agg_device_up(const struct aggregator *agg) if (!port) return 0; - return netif_running(port->slave->dev) && - netif_carrier_ok(port->slave->dev); + for (port = agg->lag_ports; port; + port = port->next_port_in_aggregator) { + if (netif_running(port->slave->dev) && + netif_carrier_ok(port->slave->dev)) + return 1; + } + + return 0; } /** @@ -1610,7 +1631,7 @@ static void ad_agg_selection_logic(struct aggregator *agg, agg->is_active = 0; - if (agg->num_of_ports && agg_device_up(agg)) + if (__agg_active_ports(agg) && agg_device_up(agg)) best = ad_agg_selection_test(best, agg); } @@ -1622,7 +1643,7 @@ static void ad_agg_selection_logic(struct aggregator *agg, * answering partner. */ if (active && active->lag_ports && - active->lag_ports->is_enabled && + __agg_active_ports(active) && (__agg_has_partner(active) || (!__agg_has_partner(active) && !__agg_has_partner(best)))) { @@ -2133,7 +2154,7 @@ void bond_3ad_unbind_slave(struct slave *slave) else temp_aggregator->lag_ports = temp_port->next_port_in_aggregator; temp_aggregator->num_of_ports--; - if (temp_aggregator->num_of_ports == 0) { + if (__agg_active_ports(temp_aggregator) == 0) { select_new_active_agg = temp_aggregator->is_active; ad_clear_agg(temp_aggregator); if (select_new_active_agg) { @@ -2432,7 +2453,9 @@ void bond_3ad_adapter_speed_duplex_changed(struct slave *slave) */ void bond_3ad_handle_link_change(struct slave *slave, char link) { + struct aggregator *agg; struct port *port; + bool dummy; port = &(SLAVE_AD_INFO(slave)->port); @@ -2459,6 +2482,9 @@ void bond_3ad_handle_link_change(struct slave *slave, char link) port->is_enabled = false; ad_update_actor_keys(port, true); } + agg = __get_first_agg(port); + ad_agg_selection_logic(agg, &dummy); + netdev_dbg(slave->bond->dev, "Port %d changed link status to %s\n", port->actor_port_number, link == BOND_LINK_UP ? "UP" : "DOWN"); @@ -2499,7 +2525,7 @@ int bond_3ad_set_carrier(struct bonding *bond) active = __get_active_agg(&(SLAVE_AD_INFO(first_slave)->aggregator)); if (active) { /* are enough slaves available to consider link up? */ - if (active->num_of_ports < bond->params.min_links) { + if (__agg_active_ports(active) < bond->params.min_links) { if (netif_carrier_ok(bond->dev)) { netif_carrier_off(bond->dev); goto out; -- cgit v1.2.3 From d2b13233879ca1268a1c027d4573109e5a777811 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 23 Jun 2016 14:23:12 -0700 Subject: net: bgmac: Fix SOF bit checking We are checking for the Start of Frame bit in the ctl1 word, while this bit is set in the ctl0 word instead. Read the ctl0 word and update the check to verify that. Fixes: 9cde94506eac ("bgmac: implement scatter/gather support") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index ee5f431ab32a..70926c611f25 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -267,15 +267,16 @@ static void bgmac_dma_tx_free(struct bgmac *bgmac, struct bgmac_dma_ring *ring) while (ring->start != ring->end) { int slot_idx = ring->start % BGMAC_TX_RING_SLOTS; struct bgmac_slot_info *slot = &ring->slots[slot_idx]; - u32 ctl1; + u32 ctl0, ctl1; int len; if (slot_idx == empty_slot) break; + ctl0 = le32_to_cpu(ring->cpu_base[slot_idx].ctl0); ctl1 = le32_to_cpu(ring->cpu_base[slot_idx].ctl1); len = ctl1 & BGMAC_DESC_CTL1_LEN; - if (ctl1 & BGMAC_DESC_CTL0_SOF) + if (ctl0 & BGMAC_DESC_CTL0_SOF) /* Unmap no longer used buffer */ dma_unmap_single(dma_dev, slot->dma_addr, len, DMA_TO_DEVICE); -- cgit v1.2.3 From c3897f2a69e54dd113fc9abd2daf872e5b495798 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 23 Jun 2016 14:25:32 -0700 Subject: net: bgmac: Start transmit queue in bgmac_open The driver does not start the transmit queue in bgmac_open(). If the queue was stopped prior to closing then re-opening the interface, we would never be able to wake-up again. Fixes: dd4544f05469 ("bgmac: driver for GBit MAC core on BCMA bus") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 70926c611f25..85cd07f72ffb 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -1314,6 +1314,9 @@ static int bgmac_open(struct net_device *net_dev) phy_start(bgmac->phy_dev); netif_carrier_on(net_dev); + + netif_start_queue(net_dev); + return 0; } -- cgit v1.2.3 From 3894396e64994f31c3ef5c7e6f63dded0593e567 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 23 Jun 2016 14:25:33 -0700 Subject: net: bgmac: Remove superflous netif_carrier_on() bgmac_open() calls phy_start() to initialize the PHY state machine, which will set the interface's carrier state accordingly, no need to force that as this could be conflicting with the PHY state determined by PHYLIB. Fixes: dd4544f05469 ("bgmac: driver for GBit MAC core on BCMA bus") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 85cd07f72ffb..a6333d38ecc0 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -1313,8 +1313,6 @@ static int bgmac_open(struct net_device *net_dev) phy_start(bgmac->phy_dev); - netif_carrier_on(net_dev); - netif_start_queue(net_dev); return 0; -- cgit v1.2.3 From f299a02d5f13c4deb52c1a7ddf2b42630fe6294a Mon Sep 17 00:00:00 2001 From: Wang Sheng-Hui Date: Fri, 24 Jun 2016 08:52:11 +0800 Subject: net/mlx5: use mlx5_buf_alloc_node instead of mlx5_buf_alloc in mlx5_wq_ll_create Commit 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") introduced mlx5_*_alloc_node() but missed changing some calling and warn messages. This patch introduces 2 changes: * Use mlx5_buf_alloc_node() instead of mlx5_buf_alloc() in mlx5_wq_ll_create() * Update the failure warn messages with _node postfix for mlx5_*_alloc function names Fixes: 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") Signed-off-by: Wang Sheng-Hui Acked-By: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/wq.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/wq.c b/drivers/net/ethernet/mellanox/mlx5/core/wq.c index ce21ee5b2357..821a087c7ae2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/wq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/wq.c @@ -75,14 +75,14 @@ int mlx5_wq_cyc_create(struct mlx5_core_dev *mdev, struct mlx5_wq_param *param, err = mlx5_db_alloc_node(mdev, &wq_ctrl->db, param->db_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_db_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_db_alloc_node() failed, %d\n", err); return err; } err = mlx5_buf_alloc_node(mdev, mlx5_wq_cyc_get_byte_size(wq), &wq_ctrl->buf, param->buf_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_buf_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_buf_alloc_node() failed, %d\n", err); goto err_db_free; } @@ -111,14 +111,14 @@ int mlx5_cqwq_create(struct mlx5_core_dev *mdev, struct mlx5_wq_param *param, err = mlx5_db_alloc_node(mdev, &wq_ctrl->db, param->db_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_db_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_db_alloc_node() failed, %d\n", err); return err; } err = mlx5_buf_alloc_node(mdev, mlx5_cqwq_get_byte_size(wq), &wq_ctrl->buf, param->buf_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_buf_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_buf_alloc_node() failed, %d\n", err); goto err_db_free; } @@ -148,13 +148,14 @@ int mlx5_wq_ll_create(struct mlx5_core_dev *mdev, struct mlx5_wq_param *param, err = mlx5_db_alloc_node(mdev, &wq_ctrl->db, param->db_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_db_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_db_alloc_node() failed, %d\n", err); return err; } - err = mlx5_buf_alloc(mdev, mlx5_wq_ll_get_byte_size(wq), &wq_ctrl->buf); + err = mlx5_buf_alloc_node(mdev, mlx5_wq_ll_get_byte_size(wq), + &wq_ctrl->buf, param->buf_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_buf_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_buf_alloc_node() failed, %d\n", err); goto err_db_free; } -- cgit v1.2.3 From 62630ea768869beeb1e514b0bf5607a0c9b93d12 Mon Sep 17 00:00:00 2001 From: Allen Hung Date: Thu, 23 Jun 2016 16:31:29 +0800 Subject: Revert "HID: multitouch: enable palm rejection if device implements confidence usage" This reverts commit 25a84db15b3f ("HID: multitouch: enable palm rejection if device implements confidence usage") The commit enables palm rejection for Win8 Precision Touchpad devices but the quirk MT_QUIRK_VALID_IS_CONFIDENCE it is using is not working very properly. This quirk is originally designed for some WIn7 touchscreens. Use of this for a Win8 Precision Touchpad will cause unexpected pointer jumping problem. Cc: stable@vger.kernel.org # v4.5+ Reviewed-by: Benjamin Tissoires Tested-by: Andy Lutomirski # XPS 13 9350, BIOS 1.4.3 Signed-off-by: Allen Hung Signed-off-by: Jiri Kosina --- drivers/hid/hid-multitouch.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 95b7d61d9910..4ef700688657 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -502,11 +502,6 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi, mt_store_field(usage, td, hi); return 1; case HID_DG_CONFIDENCE: - if (cls->name == MT_CLS_WIN_8 && - field->application == HID_DG_TOUCHPAD) { - cls->quirks &= ~MT_QUIRK_ALWAYS_VALID; - cls->quirks |= MT_QUIRK_VALID_IS_CONFIDENCE; - } mt_store_field(usage, td, hi); return 1; case HID_DG_TIPSWITCH: -- cgit v1.2.3 From 6dd2e27a103d716921cc4a1a96a9adc0a8e3ab57 Mon Sep 17 00:00:00 2001 From: Allen Hung Date: Thu, 23 Jun 2016 16:31:30 +0800 Subject: HID: multitouch: enable palm rejection for Windows Precision Touchpad The usage Confidence is mandary to Windows Precision Touchpad devices. If it is examined in input_mapping on a WIndows Precision Touchpad, a new add quirk MT_QUIRK_CONFIDENCE desgned for such devices will be applied to the device. A touch with the confidence bit is not set is determined as invalid. Tested on Dell XPS13 9343 Cc: stable@vger.kernel.org # v4.5+ Reviewed-by: Benjamin Tissoires Tested-by: Andy Lutomirski # XPS 13 9350, BIOS 1.4.3 Signed-off-by: Allen Hung Signed-off-by: Jiri Kosina --- drivers/hid/hid-multitouch.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 4ef700688657..fb6f1f447279 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -61,6 +61,7 @@ MODULE_LICENSE("GPL"); #define MT_QUIRK_ALWAYS_VALID (1 << 4) #define MT_QUIRK_VALID_IS_INRANGE (1 << 5) #define MT_QUIRK_VALID_IS_CONFIDENCE (1 << 6) +#define MT_QUIRK_CONFIDENCE (1 << 7) #define MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE (1 << 8) #define MT_QUIRK_NO_AREA (1 << 9) #define MT_QUIRK_IGNORE_DUPLICATES (1 << 10) @@ -78,6 +79,7 @@ struct mt_slot { __s32 contactid; /* the device ContactID assigned to this slot */ bool touch_state; /* is the touch valid? */ bool inrange_state; /* is the finger in proximity of the sensor? */ + bool confidence_state; /* is the touch made by a finger? */ }; struct mt_class { @@ -502,6 +504,9 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi, mt_store_field(usage, td, hi); return 1; case HID_DG_CONFIDENCE: + if (cls->name == MT_CLS_WIN_8 && + field->application == HID_DG_TOUCHPAD) + cls->quirks |= MT_QUIRK_CONFIDENCE; mt_store_field(usage, td, hi); return 1; case HID_DG_TIPSWITCH: @@ -614,6 +619,7 @@ static void mt_complete_slot(struct mt_device *td, struct input_dev *input) return; if (td->curvalid || (td->mtclass.quirks & MT_QUIRK_ALWAYS_VALID)) { + int active; int slotnum = mt_compute_slot(td, input); struct mt_slot *s = &td->curdata; struct input_mt *mt = input->mt; @@ -628,10 +634,14 @@ static void mt_complete_slot(struct mt_device *td, struct input_dev *input) return; } + if (!(td->mtclass.quirks & MT_QUIRK_CONFIDENCE)) + s->confidence_state = 1; + active = (s->touch_state || s->inrange_state) && + s->confidence_state; + input_mt_slot(input, slotnum); - input_mt_report_slot_state(input, MT_TOOL_FINGER, - s->touch_state || s->inrange_state); - if (s->touch_state || s->inrange_state) { + input_mt_report_slot_state(input, MT_TOOL_FINGER, active); + if (active) { /* this finger is in proximity of the sensor */ int wide = (s->w > s->h); /* divided by two to match visual scale of touch */ @@ -696,6 +706,8 @@ static void mt_process_mt_event(struct hid_device *hid, struct hid_field *field, td->curdata.touch_state = value; break; case HID_DG_CONFIDENCE: + if (quirks & MT_QUIRK_CONFIDENCE) + td->curdata.confidence_state = value; if (quirks & MT_QUIRK_VALID_IS_CONFIDENCE) td->curvalid = value; break; -- cgit v1.2.3 From ab8ed951080e8f59b1da4ea10ac7c05ba24a3cbd Mon Sep 17 00:00:00 2001 From: Aaron Campbell Date: Fri, 24 Jun 2016 10:05:32 -0300 Subject: connector: fix out-of-order cn_proc netlink message delivery The proc connector messages include a sequence number, allowing userspace programs to detect lost messages. However, performing this detection is currently more difficult than necessary, since netlink messages can be delivered to the application out-of-order. To fix this, leave pre-emption disabled during cn_netlink_send(), and use GFP_NOWAIT. The following was written as a test case. Building the kernel w/ make -j32 proved a reliable way to generate out-of-order cn_proc messages. int main(int argc, char *argv[]) { static uint32_t last_seq[CPU_SETSIZE], seq; int cpu, fd; struct sockaddr_nl sa; struct __attribute__((aligned(NLMSG_ALIGNTO))) { struct nlmsghdr nl_hdr; struct __attribute__((__packed__)) { struct cn_msg cn_msg; struct proc_event cn_proc; }; } rmsg; struct __attribute__((aligned(NLMSG_ALIGNTO))) { struct nlmsghdr nl_hdr; struct __attribute__((__packed__)) { struct cn_msg cn_msg; enum proc_cn_mcast_op cn_mcast; }; } smsg; fd = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR); if (fd < 0) { perror("socket"); } sa.nl_family = AF_NETLINK; sa.nl_groups = CN_IDX_PROC; sa.nl_pid = getpid(); if (bind(fd, (struct sockaddr *)&sa, sizeof(sa)) < 0) { perror("bind"); } memset(&smsg, 0, sizeof(smsg)); smsg.nl_hdr.nlmsg_len = sizeof(smsg); smsg.nl_hdr.nlmsg_pid = getpid(); smsg.nl_hdr.nlmsg_type = NLMSG_DONE; smsg.cn_msg.id.idx = CN_IDX_PROC; smsg.cn_msg.id.val = CN_VAL_PROC; smsg.cn_msg.len = sizeof(enum proc_cn_mcast_op); smsg.cn_mcast = PROC_CN_MCAST_LISTEN; if (send(fd, &smsg, sizeof(smsg), 0) != sizeof(smsg)) { perror("send"); } while (recv(fd, &rmsg, sizeof(rmsg), 0) == sizeof(rmsg)) { cpu = rmsg.cn_proc.cpu; if (cpu < 0) { continue; } seq = rmsg.cn_msg.seq; if ((last_seq[cpu] != 0) && (seq != last_seq[cpu] + 1)) { printf("out-of-order seq=%d on cpu=%d\n", seq, cpu); } last_seq[cpu] = seq; } /* NOTREACHED */ perror("recv"); return -1; } Signed-off-by: Aaron Campbell Signed-off-by: David S. Miller --- drivers/connector/cn_proc.c | 43 ++++++++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c index 15d06fcf0b50..b02f9c606e0b 100644 --- a/drivers/connector/cn_proc.c +++ b/drivers/connector/cn_proc.c @@ -56,11 +56,21 @@ static struct cb_id cn_proc_event_id = { CN_IDX_PROC, CN_VAL_PROC }; /* proc_event_counts is used as the sequence number of the netlink message */ static DEFINE_PER_CPU(__u32, proc_event_counts) = { 0 }; -static inline void get_seq(__u32 *ts, int *cpu) +static inline void send_msg(struct cn_msg *msg) { preempt_disable(); - *ts = __this_cpu_inc_return(proc_event_counts) - 1; - *cpu = smp_processor_id(); + + msg->seq = __this_cpu_inc_return(proc_event_counts) - 1; + ((struct proc_event *)msg->data)->cpu = smp_processor_id(); + + /* + * Preemption remains disabled during send to ensure the messages are + * ordered according to their sequence numbers. + * + * If cn_netlink_send() fails, the data is not sent. + */ + cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_NOWAIT); + preempt_enable(); } @@ -77,7 +87,6 @@ void proc_fork_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_FORK; rcu_read_lock(); @@ -92,8 +101,7 @@ void proc_fork_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - /* If cn_netlink_send() failed, the data is not sent */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_exec_connector(struct task_struct *task) @@ -108,7 +116,6 @@ void proc_exec_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_EXEC; ev->event_data.exec.process_pid = task->pid; @@ -118,7 +125,7 @@ void proc_exec_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_id_connector(struct task_struct *task, int which_id) @@ -150,14 +157,13 @@ void proc_id_connector(struct task_struct *task, int which_id) return; } rcu_read_unlock(); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_sid_connector(struct task_struct *task) @@ -172,7 +178,6 @@ void proc_sid_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_SID; ev->event_data.sid.process_pid = task->pid; @@ -182,7 +187,7 @@ void proc_sid_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_ptrace_connector(struct task_struct *task, int ptrace_id) @@ -197,7 +202,6 @@ void proc_ptrace_connector(struct task_struct *task, int ptrace_id) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_PTRACE; ev->event_data.ptrace.process_pid = task->pid; @@ -215,7 +219,7 @@ void proc_ptrace_connector(struct task_struct *task, int ptrace_id) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_comm_connector(struct task_struct *task) @@ -230,7 +234,6 @@ void proc_comm_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_COMM; ev->event_data.comm.process_pid = task->pid; @@ -241,7 +244,7 @@ void proc_comm_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_coredump_connector(struct task_struct *task) @@ -256,7 +259,6 @@ void proc_coredump_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_COREDUMP; ev->event_data.coredump.process_pid = task->pid; @@ -266,7 +268,7 @@ void proc_coredump_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_exit_connector(struct task_struct *task) @@ -281,7 +283,6 @@ void proc_exit_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_EXIT; ev->event_data.exit.process_pid = task->pid; @@ -293,7 +294,7 @@ void proc_exit_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } /* @@ -325,7 +326,7 @@ static void cn_proc_ack(int err, int rcvd_seq, int rcvd_ack) msg->ack = rcvd_ack + 1; msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } /** -- cgit v1.2.3 From 69fc58a57e56bf5e39b48809aefffdaa1b04c945 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 24 Jun 2016 16:25:24 -0700 Subject: net: phy: Manage fixed PHY address space using IDA If we have a system which uses fixed PHY devices and calls fixed_phy_register() then fixed_phy_unregister() we can exhaust the number of fixed PHYs available after a while, since we keep incrementing the variable phy_fixed_addr, but we never decrement it. This patch fixes that by converting the fixed PHY allocation to using IDA, which takes care of the allocation/dealloaction of the PHY addresses for us. Fixes: a75951217472 ("net: phy: extend fixed driver with fixed_phy_register()") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/fixed_phy.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c index 2d2e4339f0df..9ec7f7353434 100644 --- a/drivers/net/phy/fixed_phy.c +++ b/drivers/net/phy/fixed_phy.c @@ -23,6 +23,7 @@ #include #include #include +#include #define MII_REGS_NUM 29 @@ -286,6 +287,8 @@ err_regs: } EXPORT_SYMBOL_GPL(fixed_phy_add); +static DEFINE_IDA(phy_fixed_ida); + static void fixed_phy_del(int phy_addr) { struct fixed_mdio_bus *fmb = &platform_fmb; @@ -297,14 +300,12 @@ static void fixed_phy_del(int phy_addr) if (gpio_is_valid(fp->link_gpio)) gpio_free(fp->link_gpio); kfree(fp); + ida_simple_remove(&phy_fixed_ida, phy_addr); return; } } } -static int phy_fixed_addr; -static DEFINE_SPINLOCK(phy_fixed_addr_lock); - struct phy_device *fixed_phy_register(unsigned int irq, struct fixed_phy_status *status, int link_gpio, @@ -319,17 +320,15 @@ struct phy_device *fixed_phy_register(unsigned int irq, return ERR_PTR(-EPROBE_DEFER); /* Get the next available PHY address, up to PHY_MAX_ADDR */ - spin_lock(&phy_fixed_addr_lock); - if (phy_fixed_addr == PHY_MAX_ADDR) { - spin_unlock(&phy_fixed_addr_lock); - return ERR_PTR(-ENOSPC); - } - phy_addr = phy_fixed_addr++; - spin_unlock(&phy_fixed_addr_lock); + phy_addr = ida_simple_get(&phy_fixed_ida, 0, PHY_MAX_ADDR, GFP_KERNEL); + if (phy_addr < 0) + return ERR_PTR(phy_addr); ret = fixed_phy_add(irq, phy_addr, status, link_gpio); - if (ret < 0) + if (ret < 0) { + ida_simple_remove(&phy_fixed_ida, phy_addr); return ERR_PTR(ret); + } phy = get_phy_device(fmb->mii_bus, phy_addr, false); if (IS_ERR(phy)) { @@ -434,6 +433,7 @@ static void __exit fixed_mdio_bus_exit(void) list_del(&fp->node); kfree(fp); } + ida_destroy(&phy_fixed_ida); } module_exit(fixed_mdio_bus_exit); -- cgit v1.2.3 From 3ec0a0f10ceb77c78f540ded1d13bf0cf7f89a07 Mon Sep 17 00:00:00 2001 From: Harini Katakam Date: Mon, 27 Jun 2016 13:09:59 +0530 Subject: net: marvell: Add separate config ANEG function for Marvell 88E1111 Marvell 88E1111 currently uses the generic marvell config ANEG function. This function has a sequence accessing Page 5 and Register 31, both of which are not defined or reserved for this PHY. Hence this patch adds a new config ANEG function for Marvell 88E1111 without these erroneous accesses. Signed-off-by: Harini Katakam Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 44 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 79ccc11facc3..ec2c1eee6405 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -285,6 +285,48 @@ static int marvell_config_aneg(struct phy_device *phydev) return 0; } +static int m88e1111_config_aneg(struct phy_device *phydev) +{ + int err; + + /* The Marvell PHY has an errata which requires + * that certain registers get written in order + * to restart autonegotiation + */ + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + + err = marvell_set_polarity(phydev, phydev->mdix); + if (err < 0) + return err; + + err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL, + MII_M1111_PHY_LED_DIRECT); + if (err < 0) + return err; + + err = genphy_config_aneg(phydev); + if (err < 0) + return err; + + if (phydev->autoneg != AUTONEG_ENABLE) { + int bmcr; + + /* A write to speed/duplex bits (that is performed by + * genphy_config_aneg() call above) must be followed by + * a software reset. Otherwise, the write has no effect. + */ + bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; + + err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET); + if (err < 0) + return err; + } + + return 0; +} + #ifdef CONFIG_OF_MDIO /* * Set and/or override some configuration registers based on the @@ -1175,7 +1217,7 @@ static struct phy_driver marvell_drivers[] = { .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e1111_config_init, - .config_aneg = &marvell_config_aneg, + .config_aneg = &m88e1111_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, -- cgit v1.2.3 From 664a84d2c77cbff2945ed7f96d08afbba42b6293 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Fri, 13 May 2016 20:53:56 +0300 Subject: drm/i915: Refresh cached DP port register value on resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During hibernation the cached DP port register value will be left with whatever value we have there when we create the hibernation image. Currently that means the port (and eDP PLL) will be off in the cached value. However when we resume there is no guarantee that the value in the actual register will match the cached value. If i915 isn't loaded in the kernel that loads the hibernation image, the port may well be on (eg. left on by the BIOS). The encoder state readout does the right thing in this case and updates our encoder state to reflect the actual hardware state. However the post-resume modeset will then use the stale cached port register value in intel_dp_link_down() and potentially confuse the hardware. This was caught by the following assert WARNING: CPU: 3 PID: 5288 at ../drivers/gpu/drm/i915/intel_dp.c:2184 assert_edp_pll+0x99/0xa0 [i915] eDP PLL state assertion failure (expected on, current off) on account of the eDP PLL getting prematurely turned off when shutting down the port, since the DP_PLL_ENABLE bit wasn't set in the cached register value. Presumably I introduced this problem in commit 6fec76628333 ("drm/i915: Use intel_dp->DP in eDP PLL setup") as before that we didn't update the cached value after shuttting the port down. That's assuming the port got enabled at least once prior to hibernating. If that didn't happen then the cached value would still have been totally out of sync with reality (eg. first boot w/o eDP on, then hibernate, and then resume with eDP on). So, let's fix this properly and refresh the cached register value from the hardware register during resume. DDI platforms shouldn't use the cached value during port disable at least, so shouldn't have this particular issue. They might still have issues if we skip the initial modeset and then try to retrain the link or something. But untangling this DP vs. DDI mess is a bigger topic, so let's jut punt on DDI for now. Cc: Jani Nikula Cc: stable@vger.kernel.org Fixes: 6fec76628333 ("drm/i915: Use intel_dp->DP in eDP PLL setup") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1463162036-27931-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak (cherry picked from commit 64989ca4b27acb026b6496ec21e43bee66f86a5b) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 79cf2d5f5a20..49c582d9eb5a 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4899,13 +4899,15 @@ static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp) void intel_dp_encoder_reset(struct drm_encoder *encoder) { - struct intel_dp *intel_dp; + struct drm_i915_private *dev_priv = to_i915(encoder->dev); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + + if (!HAS_DDI(dev_priv)) + intel_dp->DP = I915_READ(intel_dp->output_reg); if (to_intel_encoder(encoder)->type != INTEL_OUTPUT_EDP) return; - intel_dp = enc_to_intel_dp(encoder); - pps_lock(intel_dp); /* -- cgit v1.2.3 From ea12e2a0cad62f6d634da62e7bf50ffe077de13b Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:30 +0300 Subject: drm/i915/bxt: Avoid early timeout during PLL enable Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. I noticed this via the PLL locking timing out incorrectly, with this fix I couldn't reproduce the problem. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-2-git-send-email-imre.deak@intel.com (cherry picked from commit 0b786e41c73956126f6297764459021deef8aba7) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dpll_mgr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c index baf6f5584cbd..58f60b27837e 100644 --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c @@ -1377,8 +1377,8 @@ static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv, I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); POSTING_READ(BXT_PORT_PLL_ENABLE(port)); - if (wait_for_atomic_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) & - PORT_PLL_LOCK), 200)) + if (wait_for_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) & PORT_PLL_LOCK), + 200)) DRM_ERROR("PLL %d not locked\n", port); /* -- cgit v1.2.3 From 11f6145791775ce41b8993fd29e19eb53ef0ff14 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:31 +0300 Subject: drm/i915/lpt: Avoid early timeout during FDI PHY reset Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-3-git-send-email-imre.deak@intel.com (cherry picked from commit cf3598c23cd09d5f063fa8c12fe9ddd5a352d3d5) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 56a1637c864f..a164ea44f668 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8447,16 +8447,16 @@ static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv) tmp |= FDI_MPHY_IOSFSB_RESET_CTL; I915_WRITE(SOUTH_CHICKEN2, tmp); - if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) & - FDI_MPHY_IOSFSB_RESET_STATUS, 100)) + if (wait_for_us(I915_READ(SOUTH_CHICKEN2) & + FDI_MPHY_IOSFSB_RESET_STATUS, 100)) DRM_ERROR("FDI mPHY reset assert timeout\n"); tmp = I915_READ(SOUTH_CHICKEN2); tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL; I915_WRITE(SOUTH_CHICKEN2, tmp); - if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) & - FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100)) + if (wait_for_us((I915_READ(SOUTH_CHICKEN2) & + FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100)) DRM_ERROR("FDI mPHY reset de-assert timeout\n"); } -- cgit v1.2.3 From fa7c13e5b1e2076b0ec716ed584ab76f9e65b7a6 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:32 +0300 Subject: drm/i915/hsw: Avoid early timeout during LCPLL disable/restore Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-4-git-send-email-imre.deak@intel.com (cherry picked from commit f53dd63f1119a98a16d1a5a7cb3277a2f1ff483d) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a164ea44f668..04452cf3eae8 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -9440,8 +9440,8 @@ static void hsw_disable_lcpll(struct drm_i915_private *dev_priv, val |= LCPLL_CD_SOURCE_FCLK; I915_WRITE(LCPLL_CTL, val); - if (wait_for_atomic_us(I915_READ(LCPLL_CTL) & - LCPLL_CD_SOURCE_FCLK_DONE, 1)) + if (wait_for_us(I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE, 1)) DRM_ERROR("Switching to FCLK failed\n"); val = I915_READ(LCPLL_CTL); @@ -9514,8 +9514,8 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv) val &= ~LCPLL_CD_SOURCE_FCLK; I915_WRITE(LCPLL_CTL, val); - if (wait_for_atomic_us((I915_READ(LCPLL_CTL) & - LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) + if (wait_for_us((I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) DRM_ERROR("Switching back to LCPLL failed\n"); } -- cgit v1.2.3 From ba34a65324259082dc6d2924cb82d562db1c6a6b Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:33 +0300 Subject: drm/i915: Avoid early timeout during AUX transfers Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. Due to the relatively long 10ms timeout, probably this didn't cause any real problems, but fix it in any case for consistency. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-5-git-send-email-imre.deak@intel.com (cherry picked from commit 713a6b668932213247b394559bc229cd0fec2777) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 49c582d9eb5a..40745e38d438 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -663,7 +663,7 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, msecs_to_jiffies_timeout(10)); else - done = wait_for_atomic(C, 10) == 0; + done = wait_for(C, 10) == 0; if (!done) DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n", has_aux_irq); -- cgit v1.2.3 From 5be1ea899da4f11de92897d2ea706e0820609b9e Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 27 Jun 2016 12:08:32 +0300 Subject: net/mlx5: Update command strings Add command string for MODIFY_FLOW_TABLE which is used by the driver. Signed-off-by: Eli Cohen Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index dcd2df6518de..0b4986268cc9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -545,6 +545,7 @@ const char *mlx5_command_str(int command) MLX5_COMMAND_STR_CASE(ALLOC_FLOW_COUNTER); MLX5_COMMAND_STR_CASE(DEALLOC_FLOW_COUNTER); MLX5_COMMAND_STR_CASE(QUERY_FLOW_COUNTER); + MLX5_COMMAND_STR_CASE(MODIFY_FLOW_TABLE); default: return "unknown command opcode"; } } -- cgit v1.2.3 From 7092fe866907f4f243122ab388cbf0e77305afaa Mon Sep 17 00:00:00 2001 From: Majd Dibbiny Date: Mon, 27 Jun 2016 12:08:33 +0300 Subject: net/mlx5: Add ConnectX-5 PCIe 4.0 to list of supported devices Add the upcoming ConnectX-5 PCIe 4.0 device to the list of supported devices by the mlx5 driver. Signed-off-by: Majd Dibbiny Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index a19b59348dd6..c65f4a13e17e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1508,8 +1508,9 @@ static const struct pci_device_id mlx5_core_pci_table[] = { { PCI_VDEVICE(MELLANOX, 0x1014), MLX5_PCI_DEV_IS_VF}, /* ConnectX-4 VF */ { PCI_VDEVICE(MELLANOX, 0x1015) }, /* ConnectX-4LX */ { PCI_VDEVICE(MELLANOX, 0x1016), MLX5_PCI_DEV_IS_VF}, /* ConnectX-4LX VF */ - { PCI_VDEVICE(MELLANOX, 0x1017) }, /* ConnectX-5 */ + { PCI_VDEVICE(MELLANOX, 0x1017) }, /* ConnectX-5, PCIe 3.0 */ { PCI_VDEVICE(MELLANOX, 0x1018), MLX5_PCI_DEV_IS_VF}, /* ConnectX-5 VF */ + { PCI_VDEVICE(MELLANOX, 0x1019) }, /* ConnectX-5, PCIe 4.0 */ { 0, } }; -- cgit v1.2.3 From e0f46eb9f64ca2e97d242b6e02b8ae2c7fe6dc56 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 27 Jun 2016 12:08:34 +0300 Subject: net/mlx5e: Change enum to better reflect usage Change MLX5E_STATE_ASYNC_EVENTS_ENABLE to MLX5E_STATE_ASYNC_EVENTS_ENABLED since it represent a state and not an operation. Fixes: acff797cd1874 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Eli Cohen Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 2 +- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index e8a6c3325b39..baa991a23475 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -401,7 +401,7 @@ enum mlx5e_traffic_types { }; enum { - MLX5E_STATE_ASYNC_EVENTS_ENABLE, + MLX5E_STATE_ASYNC_EVENTS_ENABLED, MLX5E_STATE_OPENED, MLX5E_STATE_DESTROYING, }; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index f5c8d5db25a8..4383f8c737e5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -244,7 +244,7 @@ static void mlx5e_async_event(struct mlx5_core_dev *mdev, void *vpriv, { struct mlx5e_priv *priv = vpriv; - if (!test_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLE, &priv->state)) + if (!test_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLED, &priv->state)) return; switch (event) { @@ -260,12 +260,12 @@ static void mlx5e_async_event(struct mlx5_core_dev *mdev, void *vpriv, static void mlx5e_enable_async_events(struct mlx5e_priv *priv) { - set_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLE, &priv->state); + set_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLED, &priv->state); } static void mlx5e_disable_async_events(struct mlx5e_priv *priv) { - clear_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLE, &priv->state); + clear_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLED, &priv->state); synchronize_irq(mlx5_get_msix_vec(priv->mdev, MLX5_EQ_VEC_ASYNC)); } -- cgit v1.2.3 From fd4782c21359cfd52af4c3180a2bb6bad55c1eba Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Mon, 27 Jun 2016 12:08:35 +0300 Subject: net/mlx5e: Check for BlueFlame capability before allocating SQ uar Previous to this patch mapping was always set to write combining without checking whether BlueFlame is supported in the device. Fixes: 0ba422410bbf ('net/mlx5: Fix global UAR mapping') Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 4383f8c737e5..793d7a1f92b5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -580,7 +580,7 @@ static int mlx5e_create_sq(struct mlx5e_channel *c, void *sqc_wq = MLX5_ADDR_OF(sqc, sqc, wq); int err; - err = mlx5_alloc_map_uar(mdev, &sq->uar, true); + err = mlx5_alloc_map_uar(mdev, &sq->uar, !!MLX5_CAP_GEN(mdev, bf)); if (err) return err; -- cgit v1.2.3 From 9ceec359e4ebdbbfd35375203c5bd06d602225f7 Mon Sep 17 00:00:00 2001 From: Matthew Finlay Date: Mon, 27 Jun 2016 12:08:36 +0300 Subject: net/mlx5e: Prevent adding the same vxlan port Do not allow the same vxlan udp port to be added to the device more than once. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Matthew Finlay Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/vxlan.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c index f2fd1ef16da7..05de77267d58 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c @@ -105,6 +105,9 @@ static void mlx5e_vxlan_add_port(struct work_struct *work) struct mlx5e_vxlan *vxlan; int err; + if (mlx5e_vxlan_lookup_port(priv, port)) + goto free_work; + if (mlx5e_vxlan_core_add_port_cmd(priv->mdev, port)) goto free_work; -- cgit v1.2.3 From ed80ec4c179d1f44cc1b36c7a102353ae6103793 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Mon, 27 Jun 2016 12:08:37 +0300 Subject: net/mlx5e: Fix number of PFC counters reported to ethtool Number of PFC counters used to count only number of priorities with PFC enabled, but each priority has more than one counter, hence the need to multiply it by the number of PFC counters per priority. Fixes: cf678570d5a1 ('net/mlx5e: Add per priority group to PPort counters') Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index fc7dcc03b1de..c709d41c4b70 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -184,7 +184,9 @@ static unsigned long mlx5e_query_pfc_combined(struct mlx5e_priv *priv) #define MLX5E_NUM_SQ_STATS(priv) \ (NUM_SQ_STATS * priv->params.num_channels * priv->params.num_tc * \ test_bit(MLX5E_STATE_OPENED, &priv->state)) -#define MLX5E_NUM_PFC_COUNTERS(priv) hweight8(mlx5e_query_pfc_combined(priv)) +#define MLX5E_NUM_PFC_COUNTERS(priv) \ + (hweight8(mlx5e_query_pfc_combined(priv)) * \ + NUM_PPORT_PER_PRIO_PFC_COUNTERS) static int mlx5e_get_sset_count(struct net_device *dev, int sset) { -- cgit v1.2.3 From bfe6d8d1d433cbd5513a93132695e6dbdd79e6f2 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Mon, 27 Jun 2016 12:08:38 +0300 Subject: net/mlx5e: Reorganize ethtool statistics Categorize and reorganize ethtool statistics counters by renaming to "rx_*" and "tx_*" and removing redundant and duplicated counters, this way they are easier to grasp and more user friendly. Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 30 ++- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 27 ++- drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 4 +- drivers/net/ethernet/mellanox/mlx5/core/en_stats.h | 228 +++++++++------------ drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 4 +- 5 files changed, 130 insertions(+), 163 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index c709d41c4b70..e667a870e0c2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -213,42 +213,41 @@ static void mlx5e_fill_stats_strings(struct mlx5e_priv *priv, uint8_t *data) /* SW counters */ for (i = 0; i < NUM_SW_COUNTERS; i++) - strcpy(data + (idx++) * ETH_GSTRING_LEN, sw_stats_desc[i].name); + strcpy(data + (idx++) * ETH_GSTRING_LEN, sw_stats_desc[i].format); /* Q counters */ for (i = 0; i < MLX5E_NUM_Q_CNTRS(priv); i++) - strcpy(data + (idx++) * ETH_GSTRING_LEN, q_stats_desc[i].name); + strcpy(data + (idx++) * ETH_GSTRING_LEN, q_stats_desc[i].format); /* VPORT counters */ for (i = 0; i < NUM_VPORT_COUNTERS; i++) strcpy(data + (idx++) * ETH_GSTRING_LEN, - vport_stats_desc[i].name); + vport_stats_desc[i].format); /* PPORT counters */ for (i = 0; i < NUM_PPORT_802_3_COUNTERS; i++) strcpy(data + (idx++) * ETH_GSTRING_LEN, - pport_802_3_stats_desc[i].name); + pport_802_3_stats_desc[i].format); for (i = 0; i < NUM_PPORT_2863_COUNTERS; i++) strcpy(data + (idx++) * ETH_GSTRING_LEN, - pport_2863_stats_desc[i].name); + pport_2863_stats_desc[i].format); for (i = 0; i < NUM_PPORT_2819_COUNTERS; i++) strcpy(data + (idx++) * ETH_GSTRING_LEN, - pport_2819_stats_desc[i].name); + pport_2819_stats_desc[i].format); for (prio = 0; prio < NUM_PPORT_PRIO; prio++) { for (i = 0; i < NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS; i++) - sprintf(data + (idx++) * ETH_GSTRING_LEN, "prio%d_%s", - prio, - pport_per_prio_traffic_stats_desc[i].name); + sprintf(data + (idx++) * ETH_GSTRING_LEN, + pport_per_prio_traffic_stats_desc[i].format, prio); } pfc_combined = mlx5e_query_pfc_combined(priv); for_each_set_bit(prio, &pfc_combined, NUM_PPORT_PRIO) { for (i = 0; i < NUM_PPORT_PER_PRIO_PFC_COUNTERS; i++) { - sprintf(data + (idx++) * ETH_GSTRING_LEN, "prio%d_%s", - prio, pport_per_prio_pfc_stats_desc[i].name); + sprintf(data + (idx++) * ETH_GSTRING_LEN, + pport_per_prio_pfc_stats_desc[i].format, prio); } } @@ -258,16 +257,15 @@ static void mlx5e_fill_stats_strings(struct mlx5e_priv *priv, uint8_t *data) /* per channel counters */ for (i = 0; i < priv->params.num_channels; i++) for (j = 0; j < NUM_RQ_STATS; j++) - sprintf(data + (idx++) * ETH_GSTRING_LEN, "rx%d_%s", i, - rq_stats_desc[j].name); + sprintf(data + (idx++) * ETH_GSTRING_LEN, + rq_stats_desc[j].format, i); for (tc = 0; tc < priv->params.num_tc; tc++) for (i = 0; i < priv->params.num_channels; i++) for (j = 0; j < NUM_SQ_STATS; j++) sprintf(data + (idx++) * ETH_GSTRING_LEN, - "tx%d_%s", - priv->channeltc_to_txq_map[i][tc], - sq_stats_desc[j].name); + sq_stats_desc[j].format, + priv->channeltc_to_txq_map[i][tc]); } static void mlx5e_get_strings(struct net_device *dev, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 793d7a1f92b5..cb6defd71fc1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -105,11 +105,11 @@ static void mlx5e_update_sw_counters(struct mlx5e_priv *priv) s->rx_packets += rq_stats->packets; s->rx_bytes += rq_stats->bytes; - s->lro_packets += rq_stats->lro_packets; - s->lro_bytes += rq_stats->lro_bytes; + s->rx_lro_packets += rq_stats->lro_packets; + s->rx_lro_bytes += rq_stats->lro_bytes; s->rx_csum_none += rq_stats->csum_none; - s->rx_csum_sw += rq_stats->csum_sw; - s->rx_csum_inner += rq_stats->csum_inner; + s->rx_csum_complete += rq_stats->csum_complete; + s->rx_csum_unnecessary_inner += rq_stats->csum_unnecessary_inner; s->rx_wqe_err += rq_stats->wqe_err; s->rx_mpwqe_filler += rq_stats->mpwqe_filler; s->rx_mpwqe_frag += rq_stats->mpwqe_frag; @@ -122,24 +122,23 @@ static void mlx5e_update_sw_counters(struct mlx5e_priv *priv) s->tx_packets += sq_stats->packets; s->tx_bytes += sq_stats->bytes; - s->tso_packets += sq_stats->tso_packets; - s->tso_bytes += sq_stats->tso_bytes; - s->tso_inner_packets += sq_stats->tso_inner_packets; - s->tso_inner_bytes += sq_stats->tso_inner_bytes; + s->tx_tso_packets += sq_stats->tso_packets; + s->tx_tso_bytes += sq_stats->tso_bytes; + s->tx_tso_inner_packets += sq_stats->tso_inner_packets; + s->tx_tso_inner_bytes += sq_stats->tso_inner_bytes; s->tx_queue_stopped += sq_stats->stopped; s->tx_queue_wake += sq_stats->wake; s->tx_queue_dropped += sq_stats->dropped; - s->tx_csum_inner += sq_stats->csum_offload_inner; - tx_offload_none += sq_stats->csum_offload_none; + s->tx_csum_partial_inner += sq_stats->csum_partial_inner; + tx_offload_none += sq_stats->csum_none; } } /* Update calculated offload counters */ - s->tx_csum_offload = s->tx_packets - tx_offload_none - s->tx_csum_inner; - s->rx_csum_good = s->rx_packets - s->rx_csum_none - - s->rx_csum_sw; + s->tx_csum_partial = s->tx_packets - tx_offload_none - s->tx_csum_partial_inner; + s->rx_csum_unnecessary = s->rx_packets - s->rx_csum_none - s->rx_csum_complete; - s->link_down_events = MLX5_GET(ppcnt_reg, + s->link_down_events_phy = MLX5_GET(ppcnt_reg, priv->stats.pport.phy_counters, counter_set.phys_layer_cntrs.link_down_events); } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index bd947704b59c..022acc2e8922 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -689,7 +689,7 @@ static inline void mlx5e_handle_csum(struct net_device *netdev, if (is_first_ethertype_ip(skb)) { skb->ip_summed = CHECKSUM_COMPLETE; skb->csum = csum_unfold((__force __sum16)cqe->check_sum); - rq->stats.csum_sw++; + rq->stats.csum_complete++; return; } @@ -699,7 +699,7 @@ static inline void mlx5e_handle_csum(struct net_device *netdev, if (cqe_is_tunneled(cqe)) { skb->csum_level = 1; skb->encapsulation = 1; - rq->stats.csum_inner++; + rq->stats.csum_unnecessary_inner++; } return; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h index 83bc32b25849..fcd490cc5610 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h @@ -42,9 +42,11 @@ be64_to_cpu(*(__be32 *)((char *)ptr + dsc[i].offset)) #define MLX5E_DECLARE_STAT(type, fld) #fld, offsetof(type, fld) +#define MLX5E_DECLARE_RX_STAT(type, fld) "rx%d_"#fld, offsetof(type, fld) +#define MLX5E_DECLARE_TX_STAT(type, fld) "tx%d_"#fld, offsetof(type, fld) struct counter_desc { - char name[ETH_GSTRING_LEN]; + char format[ETH_GSTRING_LEN]; int offset; /* Byte offset */ }; @@ -53,18 +55,18 @@ struct mlx5e_sw_stats { u64 rx_bytes; u64 tx_packets; u64 tx_bytes; - u64 tso_packets; - u64 tso_bytes; - u64 tso_inner_packets; - u64 tso_inner_bytes; - u64 lro_packets; - u64 lro_bytes; - u64 rx_csum_good; + u64 tx_tso_packets; + u64 tx_tso_bytes; + u64 tx_tso_inner_packets; + u64 tx_tso_inner_bytes; + u64 rx_lro_packets; + u64 rx_lro_bytes; + u64 rx_csum_unnecessary; u64 rx_csum_none; - u64 rx_csum_sw; - u64 rx_csum_inner; - u64 tx_csum_offload; - u64 tx_csum_inner; + u64 rx_csum_complete; + u64 rx_csum_unnecessary_inner; + u64 tx_csum_partial; + u64 tx_csum_partial_inner; u64 tx_queue_stopped; u64 tx_queue_wake; u64 tx_queue_dropped; @@ -76,7 +78,7 @@ struct mlx5e_sw_stats { u64 rx_cqe_compress_pkts; /* Special handling counters */ - u64 link_down_events; + u64 link_down_events_phy; }; static const struct counter_desc sw_stats_desc[] = { @@ -84,18 +86,18 @@ static const struct counter_desc sw_stats_desc[] = { { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_bytes) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_packets) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tso_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tso_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tso_inner_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tso_inner_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, lro_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, lro_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_good) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tso_packets) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tso_bytes) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tso_inner_packets) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tso_inner_bytes) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_lro_packets) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_lro_bytes) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_unnecessary) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_none) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_sw) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_inner) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_csum_offload) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_csum_inner) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_complete) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_unnecessary_inner) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_csum_partial) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_csum_partial_inner) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_queue_stopped) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_queue_wake) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_queue_dropped) }, @@ -105,7 +107,7 @@ static const struct counter_desc sw_stats_desc[] = { { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_buff_alloc_err) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_cqe_compress_blks) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_cqe_compress_pkts) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, link_down_events) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, link_down_events_phy) }, }; struct mlx5e_qcounter_stats { @@ -125,12 +127,6 @@ struct mlx5e_vport_stats { }; static const struct counter_desc vport_stats_desc[] = { - { "rx_vport_error_packets", - VPORT_COUNTER_OFF(received_errors.packets) }, - { "rx_vport_error_bytes", VPORT_COUNTER_OFF(received_errors.octets) }, - { "tx_vport_error_packets", - VPORT_COUNTER_OFF(transmit_errors.packets) }, - { "tx_vport_error_bytes", VPORT_COUNTER_OFF(transmit_errors.octets) }, { "rx_vport_unicast_packets", VPORT_COUNTER_OFF(received_eth_unicast.packets) }, { "rx_vport_unicast_bytes", @@ -192,94 +188,68 @@ struct mlx5e_pport_stats { }; static const struct counter_desc pport_802_3_stats_desc[] = { - { "frames_tx", PPORT_802_3_OFF(a_frames_transmitted_ok) }, - { "frames_rx", PPORT_802_3_OFF(a_frames_received_ok) }, - { "check_seq_err", PPORT_802_3_OFF(a_frame_check_sequence_errors) }, - { "alignment_err", PPORT_802_3_OFF(a_alignment_errors) }, - { "octets_tx", PPORT_802_3_OFF(a_octets_transmitted_ok) }, - { "octets_received", PPORT_802_3_OFF(a_octets_received_ok) }, - { "multicast_xmitted", PPORT_802_3_OFF(a_multicast_frames_xmitted_ok) }, - { "broadcast_xmitted", PPORT_802_3_OFF(a_broadcast_frames_xmitted_ok) }, - { "multicast_rx", PPORT_802_3_OFF(a_multicast_frames_received_ok) }, - { "broadcast_rx", PPORT_802_3_OFF(a_broadcast_frames_received_ok) }, - { "in_range_len_errors", PPORT_802_3_OFF(a_in_range_length_errors) }, - { "out_of_range_len", PPORT_802_3_OFF(a_out_of_range_length_field) }, - { "too_long_errors", PPORT_802_3_OFF(a_frame_too_long_errors) }, - { "symbol_err", PPORT_802_3_OFF(a_symbol_error_during_carrier) }, - { "mac_control_tx", PPORT_802_3_OFF(a_mac_control_frames_transmitted) }, - { "mac_control_rx", PPORT_802_3_OFF(a_mac_control_frames_received) }, - { "unsupported_op_rx", - PPORT_802_3_OFF(a_unsupported_opcodes_received) }, - { "pause_ctrl_rx", PPORT_802_3_OFF(a_pause_mac_ctrl_frames_received) }, - { "pause_ctrl_tx", - PPORT_802_3_OFF(a_pause_mac_ctrl_frames_transmitted) }, + { "tx_packets_phy", PPORT_802_3_OFF(a_frames_transmitted_ok) }, + { "rx_packets_phy", PPORT_802_3_OFF(a_frames_received_ok) }, + { "rx_crc_errors_phy", PPORT_802_3_OFF(a_frame_check_sequence_errors) }, + { "tx_bytes_phy", PPORT_802_3_OFF(a_octets_transmitted_ok) }, + { "rx_bytes_phy", PPORT_802_3_OFF(a_octets_received_ok) }, + { "tx_multicast_phy", PPORT_802_3_OFF(a_multicast_frames_xmitted_ok) }, + { "tx_broadcast_phy", PPORT_802_3_OFF(a_broadcast_frames_xmitted_ok) }, + { "rx_multicast_phy", PPORT_802_3_OFF(a_multicast_frames_received_ok) }, + { "rx_broadcast_phy", PPORT_802_3_OFF(a_broadcast_frames_received_ok) }, + { "rx_in_range_len_errors_phy", PPORT_802_3_OFF(a_in_range_length_errors) }, + { "rx_out_of_range_len_phy", PPORT_802_3_OFF(a_out_of_range_length_field) }, + { "rx_oversize_pkts_phy", PPORT_802_3_OFF(a_frame_too_long_errors) }, + { "rx_symbol_err_phy", PPORT_802_3_OFF(a_symbol_error_during_carrier) }, + { "tx_mac_control_phy", PPORT_802_3_OFF(a_mac_control_frames_transmitted) }, + { "rx_mac_control_phy", PPORT_802_3_OFF(a_mac_control_frames_received) }, + { "rx_unsupported_op_phy", PPORT_802_3_OFF(a_unsupported_opcodes_received) }, + { "rx_pause_ctrl_phy", PPORT_802_3_OFF(a_pause_mac_ctrl_frames_received) }, + { "tx_pause_ctrl_phy", PPORT_802_3_OFF(a_pause_mac_ctrl_frames_transmitted) }, }; static const struct counter_desc pport_2863_stats_desc[] = { - { "in_octets", PPORT_2863_OFF(if_in_octets) }, - { "in_ucast_pkts", PPORT_2863_OFF(if_in_ucast_pkts) }, - { "in_discards", PPORT_2863_OFF(if_in_discards) }, - { "in_errors", PPORT_2863_OFF(if_in_errors) }, - { "in_unknown_protos", PPORT_2863_OFF(if_in_unknown_protos) }, - { "out_octets", PPORT_2863_OFF(if_out_octets) }, - { "out_ucast_pkts", PPORT_2863_OFF(if_out_ucast_pkts) }, - { "out_discards", PPORT_2863_OFF(if_out_discards) }, - { "out_errors", PPORT_2863_OFF(if_out_errors) }, - { "in_multicast_pkts", PPORT_2863_OFF(if_in_multicast_pkts) }, - { "in_broadcast_pkts", PPORT_2863_OFF(if_in_broadcast_pkts) }, - { "out_multicast_pkts", PPORT_2863_OFF(if_out_multicast_pkts) }, - { "out_broadcast_pkts", PPORT_2863_OFF(if_out_broadcast_pkts) }, + { "rx_discards_phy", PPORT_2863_OFF(if_in_discards) }, + { "tx_discards_phy", PPORT_2863_OFF(if_out_discards) }, + { "tx_errors_phy", PPORT_2863_OFF(if_out_errors) }, }; static const struct counter_desc pport_2819_stats_desc[] = { - { "drop_events", PPORT_2819_OFF(ether_stats_drop_events) }, - { "octets", PPORT_2819_OFF(ether_stats_octets) }, - { "pkts", PPORT_2819_OFF(ether_stats_pkts) }, - { "broadcast_pkts", PPORT_2819_OFF(ether_stats_broadcast_pkts) }, - { "multicast_pkts", PPORT_2819_OFF(ether_stats_multicast_pkts) }, - { "crc_align_errors", PPORT_2819_OFF(ether_stats_crc_align_errors) }, - { "undersize_pkts", PPORT_2819_OFF(ether_stats_undersize_pkts) }, - { "oversize_pkts", PPORT_2819_OFF(ether_stats_oversize_pkts) }, - { "fragments", PPORT_2819_OFF(ether_stats_fragments) }, - { "jabbers", PPORT_2819_OFF(ether_stats_jabbers) }, - { "collisions", PPORT_2819_OFF(ether_stats_collisions) }, - { "p64octets", PPORT_2819_OFF(ether_stats_pkts64octets) }, - { "p65to127octets", PPORT_2819_OFF(ether_stats_pkts65to127octets) }, - { "p128to255octets", PPORT_2819_OFF(ether_stats_pkts128to255octets) }, - { "p256to511octets", PPORT_2819_OFF(ether_stats_pkts256to511octets) }, - { "p512to1023octets", PPORT_2819_OFF(ether_stats_pkts512to1023octets) }, - { "p1024to1518octets", - PPORT_2819_OFF(ether_stats_pkts1024to1518octets) }, - { "p1519to2047octets", - PPORT_2819_OFF(ether_stats_pkts1519to2047octets) }, - { "p2048to4095octets", - PPORT_2819_OFF(ether_stats_pkts2048to4095octets) }, - { "p4096to8191octets", - PPORT_2819_OFF(ether_stats_pkts4096to8191octets) }, - { "p8192to10239octets", - PPORT_2819_OFF(ether_stats_pkts8192to10239octets) }, + { "rx_undersize_pkts_phy", PPORT_2819_OFF(ether_stats_undersize_pkts) }, + { "rx_fragments_phy", PPORT_2819_OFF(ether_stats_fragments) }, + { "rx_jabbers_phy", PPORT_2819_OFF(ether_stats_jabbers) }, + { "rx_64_bytes_phy", PPORT_2819_OFF(ether_stats_pkts64octets) }, + { "rx_65_to_127_bytes_phy", PPORT_2819_OFF(ether_stats_pkts65to127octets) }, + { "rx_128_to_255_bytes_phy", PPORT_2819_OFF(ether_stats_pkts128to255octets) }, + { "rx_256_to_511_bytes_phy", PPORT_2819_OFF(ether_stats_pkts256to511octets) }, + { "rx_512_to_1023_bytes_phy", PPORT_2819_OFF(ether_stats_pkts512to1023octets) }, + { "rx_1024_to_1518_bytes_phy", PPORT_2819_OFF(ether_stats_pkts1024to1518octets) }, + { "rx_1519_to_2047_bytes_phy", PPORT_2819_OFF(ether_stats_pkts1519to2047octets) }, + { "rx_2048_to_4095_bytes_phy", PPORT_2819_OFF(ether_stats_pkts2048to4095octets) }, + { "rx_4096_to_8191_bytes_phy", PPORT_2819_OFF(ether_stats_pkts4096to8191octets) }, + { "rx_8192_to_10239_bytes_phy", PPORT_2819_OFF(ether_stats_pkts8192to10239octets) }, }; static const struct counter_desc pport_per_prio_traffic_stats_desc[] = { - { "rx_octets", PPORT_PER_PRIO_OFF(rx_octets) }, - { "rx_frames", PPORT_PER_PRIO_OFF(rx_frames) }, - { "tx_octets", PPORT_PER_PRIO_OFF(tx_octets) }, - { "tx_frames", PPORT_PER_PRIO_OFF(tx_frames) }, + { "rx_prio%d_bytes", PPORT_PER_PRIO_OFF(rx_octets) }, + { "rx_prio%d_packets", PPORT_PER_PRIO_OFF(rx_frames) }, + { "tx_prio%d_bytes", PPORT_PER_PRIO_OFF(tx_octets) }, + { "tx_prio%d_packets", PPORT_PER_PRIO_OFF(tx_frames) }, }; static const struct counter_desc pport_per_prio_pfc_stats_desc[] = { - { "rx_pause", PPORT_PER_PRIO_OFF(rx_pause) }, - { "rx_pause_duration", PPORT_PER_PRIO_OFF(rx_pause_duration) }, - { "tx_pause", PPORT_PER_PRIO_OFF(tx_pause) }, - { "tx_pause_duration", PPORT_PER_PRIO_OFF(tx_pause_duration) }, - { "rx_pause_transition", PPORT_PER_PRIO_OFF(rx_pause_transition) }, + { "rx_prio%d_pause", PPORT_PER_PRIO_OFF(rx_pause) }, + { "rx_prio%d_pause_duration", PPORT_PER_PRIO_OFF(rx_pause_duration) }, + { "tx_prio%d_pause", PPORT_PER_PRIO_OFF(tx_pause) }, + { "tx_prio%d_pause_duration", PPORT_PER_PRIO_OFF(tx_pause_duration) }, + { "rx_prio%d_pause_transition", PPORT_PER_PRIO_OFF(rx_pause_transition) }, }; struct mlx5e_rq_stats { u64 packets; u64 bytes; - u64 csum_sw; - u64 csum_inner; + u64 csum_complete; + u64 csum_unnecessary_inner; u64 csum_none; u64 lro_packets; u64 lro_bytes; @@ -292,19 +262,19 @@ struct mlx5e_rq_stats { }; static const struct counter_desc rq_stats_desc[] = { - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, csum_sw) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, csum_inner) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, csum_none) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, lro_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, lro_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, wqe_err) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, mpwqe_filler) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, mpwqe_frag) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, buff_alloc_err) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, cqe_compress_blks) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, cqe_compress_pkts) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, packets) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, bytes) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, csum_complete) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, csum_unnecessary_inner) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, csum_none) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, lro_packets) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, lro_bytes) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, wqe_err) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, mpwqe_filler) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, mpwqe_frag) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, buff_alloc_err) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, cqe_compress_blks) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, cqe_compress_pkts) }, }; struct mlx5e_sq_stats { @@ -315,28 +285,28 @@ struct mlx5e_sq_stats { u64 tso_bytes; u64 tso_inner_packets; u64 tso_inner_bytes; - u64 csum_offload_inner; + u64 csum_partial_inner; u64 nop; /* less likely accessed in data path */ - u64 csum_offload_none; + u64 csum_none; u64 stopped; u64 wake; u64 dropped; }; static const struct counter_desc sq_stats_desc[] = { - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, tso_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, tso_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, tso_inner_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, tso_inner_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, csum_offload_inner) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, nop) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, csum_offload_none) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, stopped) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, wake) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, dropped) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, packets) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, bytes) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tso_packets) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tso_bytes) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tso_inner_packets) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tso_inner_bytes) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, csum_partial_inner) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, nop) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, csum_none) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, stopped) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, wake) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, dropped) }, }; #define NUM_SW_COUNTERS ARRAY_SIZE(sw_stats_desc) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index b000ddc29553..5a750b9cd006 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -192,12 +192,12 @@ static netdev_tx_t mlx5e_sq_xmit(struct mlx5e_sq *sq, struct sk_buff *skb) if (skb->encapsulation) { eseg->cs_flags |= MLX5_ETH_WQE_L3_INNER_CSUM | MLX5_ETH_WQE_L4_INNER_CSUM; - sq->stats.csum_offload_inner++; + sq->stats.csum_partial_inner++; } else { eseg->cs_flags |= MLX5_ETH_WQE_L4_CSUM; } } else - sq->stats.csum_offload_none++; + sq->stats.csum_none++; if (sq->cc != sq->prev_cc) { sq->prev_cc = sq->cc; -- cgit v1.2.3 From 3f4c68cfde30caa1f6d8368fd19590671411ade2 Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Mon, 27 Jun 2016 15:30:02 +0530 Subject: net: thunderx: Fix link status reporting Check for SMU RX local/remote faults along with SPU LINK status. Otherwise at times link is UP at our end but DOWN at link partner's side. Also due to an issue in BGX it's rarely seen that initialization doesn't happen properly and SMU RX reports faults with everything fine at SPU. This patch tries to reinitialize LMAC to fix it. Also fixed LMAC disable sequence to properly bring down link. Signed-off-by: Sunil Goutham Signed-off-by: Tao Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 91 +++++++++++++++-------- drivers/net/ethernet/cavium/thunder/thunder_bgx.h | 2 + 2 files changed, 62 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c index 3ed21988626b..63a39ac97d53 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c @@ -551,7 +551,9 @@ static int bgx_xaui_check_link(struct lmac *lmac) } /* Clear rcvflt bit (latching high) and read it back */ - bgx_reg_modify(bgx, lmacid, BGX_SPUX_STATUS2, SPU_STATUS2_RCVFLT); + if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) + bgx_reg_modify(bgx, lmacid, + BGX_SPUX_STATUS2, SPU_STATUS2_RCVFLT); if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) { dev_err(&bgx->pdev->dev, "Receive fault, retry training\n"); if (bgx->use_training) { @@ -570,13 +572,6 @@ static int bgx_xaui_check_link(struct lmac *lmac) return -1; } - /* Wait for MAC RX to be ready */ - if (bgx_poll_reg(bgx, lmacid, BGX_SMUX_RX_CTL, - SMU_RX_CTL_STATUS, true)) { - dev_err(&bgx->pdev->dev, "SMU RX link not okay\n"); - return -1; - } - /* Wait for BGX RX to be idle */ if (bgx_poll_reg(bgx, lmacid, BGX_SMUX_CTL, SMU_CTL_RX_IDLE, false)) { dev_err(&bgx->pdev->dev, "SMU RX not idle\n"); @@ -589,29 +584,30 @@ static int bgx_xaui_check_link(struct lmac *lmac) return -1; } - if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) { - dev_err(&bgx->pdev->dev, "Receive fault\n"); - return -1; - } - - /* Receive link is latching low. Force it high and verify it */ - bgx_reg_modify(bgx, lmacid, BGX_SPUX_STATUS1, SPU_STATUS1_RCV_LNK); - if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_STATUS1, - SPU_STATUS1_RCV_LNK, false)) { - dev_err(&bgx->pdev->dev, "SPU receive link down\n"); - return -1; - } - + /* Clear receive packet disable */ cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_MISC_CONTROL); cfg &= ~SPU_MISC_CTL_RX_DIS; bgx_reg_write(bgx, lmacid, BGX_SPUX_MISC_CONTROL, cfg); - return 0; + + /* Check for MAC RX faults */ + cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_RX_CTL); + /* 0 - Link is okay, 1 - Local fault, 2 - Remote fault */ + cfg &= SMU_RX_CTL_STATUS; + if (!cfg) + return 0; + + /* Rx local/remote fault seen. + * Do lmac reinit to see if condition recovers + */ + bgx_lmac_xaui_init(bgx, lmacid, bgx->lmac_type); + + return -1; } static void bgx_poll_for_link(struct work_struct *work) { struct lmac *lmac; - u64 link; + u64 spu_link, smu_link; lmac = container_of(work, struct lmac, dwork.work); @@ -621,8 +617,11 @@ static void bgx_poll_for_link(struct work_struct *work) bgx_poll_reg(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1, SPU_STATUS1_RCV_LNK, false); - link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1); - if (link & SPU_STATUS1_RCV_LNK) { + spu_link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1); + smu_link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SMUX_RX_CTL); + + if ((spu_link & SPU_STATUS1_RCV_LNK) && + !(smu_link & SMU_RX_CTL_STATUS)) { lmac->link_up = 1; if (lmac->bgx->lmac_type == BGX_MODE_XLAUI) lmac->last_speed = 40000; @@ -636,9 +635,15 @@ static void bgx_poll_for_link(struct work_struct *work) } if (lmac->last_link != lmac->link_up) { + if (lmac->link_up) { + if (bgx_xaui_check_link(lmac)) { + /* Errors, clear link_up state */ + lmac->link_up = 0; + lmac->last_speed = SPEED_UNKNOWN; + lmac->last_duplex = DUPLEX_UNKNOWN; + } + } lmac->last_link = lmac->link_up; - if (lmac->link_up) - bgx_xaui_check_link(lmac); } queue_delayed_work(lmac->check_link, &lmac->dwork, HZ * 2); @@ -710,7 +715,7 @@ static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid) static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid) { struct lmac *lmac; - u64 cmrx_cfg; + u64 cfg; lmac = &bgx->lmac[lmacid]; if (lmac->check_link) { @@ -719,9 +724,33 @@ static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid) destroy_workqueue(lmac->check_link); } - cmrx_cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); - cmrx_cfg &= ~(1 << 15); - bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cmrx_cfg); + /* Disable packet reception */ + cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); + cfg &= ~CMR_PKT_RX_EN; + bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); + + /* Give chance for Rx/Tx FIFO to get drained */ + bgx_poll_reg(bgx, lmacid, BGX_CMRX_RX_FIFO_LEN, (u64)0x1FFF, true); + bgx_poll_reg(bgx, lmacid, BGX_CMRX_TX_FIFO_LEN, (u64)0x3FFF, true); + + /* Disable packet transmission */ + cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); + cfg &= ~CMR_PKT_TX_EN; + bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); + + /* Disable serdes lanes */ + if (!lmac->is_sgmii) + bgx_reg_modify(bgx, lmacid, + BGX_SPUX_CONTROL1, SPU_CTL_LOW_POWER); + else + bgx_reg_modify(bgx, lmacid, + BGX_GMP_PCS_MRX_CTL, PCS_MRX_CTL_PWR_DN); + + /* Disable LMAC */ + cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); + cfg &= ~CMR_EN; + bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); + bgx_flush_dmac_addrs(bgx, lmacid); if ((bgx->lmac_type != BGX_MODE_XFI) && diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h index 149e179363a1..42010d2e5ddf 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h @@ -41,6 +41,7 @@ #define BGX_CMRX_RX_STAT10 0xC0 #define BGX_CMRX_RX_BP_DROP 0xC8 #define BGX_CMRX_RX_DMAC_CTL 0x0E8 +#define BGX_CMRX_RX_FIFO_LEN 0x108 #define BGX_CMR_RX_DMACX_CAM 0x200 #define RX_DMACX_CAM_EN BIT_ULL(48) #define RX_DMACX_CAM_LMACID(x) (x << 49) @@ -50,6 +51,7 @@ #define BGX_CMR_CHAN_MSK_AND 0x450 #define BGX_CMR_BIST_STATUS 0x460 #define BGX_CMR_RX_LMACS 0x468 +#define BGX_CMRX_TX_FIFO_LEN 0x518 #define BGX_CMRX_TX_STAT0 0x600 #define BGX_CMRX_TX_STAT1 0x608 #define BGX_CMRX_TX_STAT2 0x610 -- cgit v1.2.3 From 3e29adba567306504e99b8363edf2d47c19dbe1b Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Mon, 27 Jun 2016 15:30:03 +0530 Subject: net: thunderx: Fix TL4 configuration for secondary Qsets TL4 calculation for a given SQ of secondary Qsets is incorrect and goes out of bounds and also for some SQ's TL4 chosen will transmit data via a different BGX interface and not same as primary Qset's interface. This patch fixes this issue. Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/nic_main.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c index 95f17f8cadac..16ed20357c5c 100644 --- a/drivers/net/ethernet/cavium/thunder/nic_main.c +++ b/drivers/net/ethernet/cavium/thunder/nic_main.c @@ -499,6 +499,7 @@ static void nic_tx_channel_cfg(struct nicpf *nic, u8 vnic, u32 rr_quantum; u8 sq_idx = sq->sq_num; u8 pqs_vnic; + int svf; if (sq->sqs_mode) pqs_vnic = nic->pqs_vf[vnic]; @@ -511,10 +512,19 @@ static void nic_tx_channel_cfg(struct nicpf *nic, u8 vnic, /* 24 bytes for FCS, IPG and preamble */ rr_quantum = ((NIC_HW_MAX_FRS + 24) / 4); - tl4 = (lmac * NIC_TL4_PER_LMAC) + (bgx * NIC_TL4_PER_BGX); + if (!sq->sqs_mode) { + tl4 = (lmac * NIC_TL4_PER_LMAC) + (bgx * NIC_TL4_PER_BGX); + } else { + for (svf = 0; svf < MAX_SQS_PER_VF; svf++) { + if (nic->vf_sqs[pqs_vnic][svf] == vnic) + break; + } + tl4 = (MAX_LMAC_PER_BGX * NIC_TL4_PER_LMAC); + tl4 += (lmac * NIC_TL4_PER_LMAC * MAX_SQS_PER_VF); + tl4 += (svf * NIC_TL4_PER_LMAC); + tl4 += (bgx * NIC_TL4_PER_BGX); + } tl4 += sq_idx; - if (sq->sqs_mode) - tl4 += vnic * 8; tl3 = tl4 / (NIC_MAX_TL4 / NIC_MAX_TL3); nic_reg_write(nic, NIC_PF_QSET_0_127_SQ_0_7_CFG2 | -- cgit v1.2.3 From 96183182ad05d1ce31b9048921c12bf4ad621eaf Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 27 Jun 2016 20:48:53 +0800 Subject: ibmvnic: fix to use list_for_each_safe() when delete items Since we will remove items off the list using list_del() we need to use a safe version of the list_for_each() macro aptly named list_for_each_safe(). Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 864cb21351a4..ecdb6854a898 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -2121,7 +2121,7 @@ static void handle_error_info_rsp(union ibmvnic_crq *crq, struct ibmvnic_adapter *adapter) { struct device *dev = &adapter->vdev->dev; - struct ibmvnic_error_buff *error_buff; + struct ibmvnic_error_buff *error_buff, *tmp; unsigned long flags; bool found = false; int i; @@ -2133,7 +2133,7 @@ static void handle_error_info_rsp(union ibmvnic_crq *crq, } spin_lock_irqsave(&adapter->error_list_lock, flags); - list_for_each_entry(error_buff, &adapter->errors, list) + list_for_each_entry_safe(error_buff, tmp, &adapter->errors, list) if (error_buff->error_id == crq->request_error_rsp.error_id) { found = true; list_del(&error_buff->list); @@ -3141,14 +3141,14 @@ static void handle_request_ras_comp_num_rsp(union ibmvnic_crq *crq, static void ibmvnic_free_inflight(struct ibmvnic_adapter *adapter) { - struct ibmvnic_inflight_cmd *inflight_cmd; + struct ibmvnic_inflight_cmd *inflight_cmd, *tmp1; struct device *dev = &adapter->vdev->dev; - struct ibmvnic_error_buff *error_buff; + struct ibmvnic_error_buff *error_buff, *tmp2; unsigned long flags; unsigned long flags2; spin_lock_irqsave(&adapter->inflight_lock, flags); - list_for_each_entry(inflight_cmd, &adapter->inflight, list) { + list_for_each_entry_safe(inflight_cmd, tmp1, &adapter->inflight, list) { switch (inflight_cmd->crq.generic.cmd) { case LOGIN: dma_unmap_single(dev, adapter->login_buf_token, @@ -3165,8 +3165,8 @@ static void ibmvnic_free_inflight(struct ibmvnic_adapter *adapter) break; case REQUEST_ERROR_INFO: spin_lock_irqsave(&adapter->error_list_lock, flags2); - list_for_each_entry(error_buff, &adapter->errors, - list) { + list_for_each_entry_safe(error_buff, tmp2, + &adapter->errors, list) { dma_unmap_single(dev, error_buff->dma, error_buff->len, DMA_FROM_DEVICE); -- cgit v1.2.3 From 5b4d10f5e0369ed79434593b7cd8e85eebbe473f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 27 Jun 2016 23:50:29 +0300 Subject: qlcnic: use the correct ring in qlcnic_83xx_process_rcv_ring_diag() There is a static checker warning here "warn: mask and shift to zero" and the code sets "ring" to zero every time. From looking at how QLCNIC_FETCH_RING_ID() is used in qlcnic_83xx_process_rcv_ring() the qlcnic_83xx_hndl() should be removed. Fixes: 4be41e92f7c6 ('qlcnic: 83xx data path routines') Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 7bd6f25b4625..607bb7d4514d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -2220,7 +2220,7 @@ void qlcnic_83xx_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring) if (!opcode) return; - ring = QLCNIC_FETCH_RING_ID(qlcnic_83xx_hndl(sts_data[0])); + ring = QLCNIC_FETCH_RING_ID(sts_data[0]); qlcnic_83xx_process_rcv_diag(adapter, ring, sts_data); desc = &sds_ring->desc_head[consumer]; desc->status_desc_data[0] = cpu_to_le64(STATUS_OWNER_PHANTOM); -- cgit v1.2.3 From 889ad4566604610804df984e1a3dd5e2c66256e5 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Tue, 28 Jun 2016 20:41:31 -0700 Subject: e1000e: keep VLAN interfaces functional after rxvlan off I've got a bug report about an e1000e interface, where a VLAN interface is set up on top of it: $ ip link add link ens1f0 name ens1f0.99 type vlan id 99 $ ip link set ens1f0 up $ ip link set ens1f0.99 up $ ip addr add 192.168.99.92 dev ens1f0.99 At this point, I can ping another host on vlan 99, ip 192.168.99.91. However, if I do the following: $ ethtool -K ens1f0 rxvlan off Then no traffic passes on ens1f0.99. It comes back if I toggle rxvlan on again. I'm not sure if this is actually intended behavior, or if there's a lack of software VLAN stripping fallback, or what, but things continue to work if I simply don't call e1000e_vlan_strip_disable() if there are active VLANs (plagiarizing a function from the e1000 driver here) on the interface. Also slipped a related-ish fix to the kerneldoc text for e1000e_vlan_strip_disable here... Signed-off-by: Jarod Wilson Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/e1000e/netdev.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 75e60897b7e7..73f745205a1c 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -154,6 +154,16 @@ void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val) writel(val, hw->hw_addr + reg); } +static bool e1000e_vlan_used(struct e1000_adapter *adapter) +{ + u16 vid; + + for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) + return true; + + return false; +} + /** * e1000_regdump - register printout routine * @hw: pointer to the HW structure @@ -2789,7 +2799,7 @@ static void e1000e_vlan_filter_enable(struct e1000_adapter *adapter) } /** - * e1000e_vlan_strip_enable - helper to disable HW VLAN stripping + * e1000e_vlan_strip_disable - helper to disable HW VLAN stripping * @adapter: board private structure to initialize **/ static void e1000e_vlan_strip_disable(struct e1000_adapter *adapter) @@ -3443,7 +3453,8 @@ static void e1000e_set_rx_mode(struct net_device *netdev) ew32(RCTL, rctl); - if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) + if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX || + e1000e_vlan_used(adapter)) e1000e_vlan_strip_enable(adapter); else e1000e_vlan_strip_disable(adapter); -- cgit v1.2.3 From 34c7bb4705a0a2d344b0c82eaf3d3bfa2bc9da45 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Tue, 28 Jun 2016 07:46:03 -0400 Subject: qed: Protect the doorbell BAR with the write barriers. SPQ doorbell is currently protected with the compilation barrier. Under the stress scenarios, we may get into a state where (due to the weak ordering) several ramrod doorbells were written to the BAR with an out-of-order producer values. Need to change the barrier type to a write barrier to make sure that the write buffer is flushed after each doorbell. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_spq.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c index 67d9893774d8..b122f6013b6c 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_spq.c +++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c @@ -213,19 +213,15 @@ static int qed_spq_hw_post(struct qed_hwfn *p_hwfn, SET_FIELD(db.params, CORE_DB_DATA_AGG_VAL_SEL, DQ_XCM_CORE_SPQ_PROD_CMD); db.agg_flags = DQ_XCM_CORE_DQ_CF_CMD; - - /* validate producer is up to-date */ - rmb(); - db.spq_prod = cpu_to_le16(qed_chain_get_prod_idx(p_chain)); - /* do not reorder */ - barrier(); + /* make sure the SPQE is updated before the doorbell */ + wmb(); DOORBELL(p_hwfn, qed_db_addr(p_spq->cid, DQ_DEMS_LEGACY), *(u32 *)&db); /* make sure doorbell is rang */ - mmiowb(); + wmb(); DP_VERBOSE(p_hwfn, QED_MSG_SPQ, "Doorbelled [0x%08x, CID 0x%08x] with Flags: %02x agg_params: %02x, prod: %04x\n", -- cgit v1.2.3 From 3a8bd717ee3e0508fc0dd517b97e950989e15f8c Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 27 Jun 2016 14:46:47 +0800 Subject: drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index d23dcce6c03c..d15584c84595 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -2924,6 +2924,31 @@ static int polaris10_set_private_data_based_on_pptable(struct pp_hwmgr *hwmgr) return 0; } +int polaris10_patch_voltage_workaround(struct pp_hwmgr *hwmgr) +{ + struct phm_ppt_v1_information *table_info = + (struct phm_ppt_v1_information *)(hwmgr->pptable); + struct phm_ppt_v1_clock_voltage_dependency_table *dep_mclk_table = + table_info->vdd_dep_on_mclk; + struct phm_ppt_v1_voltage_lookup_table *lookup_table = + table_info->vddc_lookup_table; + uint32_t i; + + if (hwmgr->chip_id == CHIP_POLARIS10 && hwmgr->hw_revision == 0xC7) { + if (lookup_table->entries[dep_mclk_table->entries[dep_mclk_table->count-1].vddInd].us_vdd >= 1000) + return 0; + + for (i = 0; i < lookup_table->count; i++) { + if (lookup_table->entries[i].us_vdd < 0xff01 && lookup_table->entries[i].us_vdd >= 1000) { + dep_mclk_table->entries[dep_mclk_table->count-1].vddInd = (uint8_t) i; + return 0; + } + } + } + return 0; +} + + int polaris10_hwmgr_backend_init(struct pp_hwmgr *hwmgr) { struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); @@ -3001,6 +3026,7 @@ int polaris10_hwmgr_backend_init(struct pp_hwmgr *hwmgr) polaris10_set_features_platform_caps(hwmgr); + polaris10_patch_voltage_workaround(hwmgr); polaris10_init_dpm_defaults(hwmgr); /* Get leakage voltage based on leakage ID. */ -- cgit v1.2.3 From 0636e0d666e0238fa22348172c20a49f42a94395 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 27 Jun 2016 17:30:24 +0800 Subject: drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11. 1. Populate correct value of VDDCI voltage for SMC SAMU, VCE, and UVD levels depending on whether VDDCi control is SVI2 or GPIO. 2. Populate SMC ACPI minimum voltage using VBIOS boot SCLK and MCLK When static voltage is configured as VDDCI, driver still tries to program a voltage for MM minVoltage using VDDC-VDDCI delta requirement. minVoltage should be set as boot up voltage. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 101 ++++++++++++--------- 1 file changed, 60 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index d15584c84595..ec2a7ada346a 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -1423,22 +1423,19 @@ static int polaris10_populate_smc_acpi_level(struct pp_hwmgr *hwmgr, table->ACPILevel.Flags &= ~PPSMC_SWSTATE_FLAG_DC; - if (!data->sclk_dpm_key_disabled) { - /* Get MinVoltage and Frequency from DPM0, - * already converted to SMC_UL */ - sclk_frequency = data->dpm_table.sclk_table.dpm_levels[0].value; - result = polaris10_get_dependency_volt_by_clk(hwmgr, - table_info->vdd_dep_on_sclk, - table->ACPILevel.SclkFrequency, - &table->ACPILevel.MinVoltage, &mvdd); - PP_ASSERT_WITH_CODE((0 == result), - "Cannot find ACPI VDDC voltage value " - "in Clock Dependency Table", ); - } else { - sclk_frequency = data->vbios_boot_state.sclk_bootup_value; - table->ACPILevel.MinVoltage = - data->vbios_boot_state.vddc_bootup_value * VOLTAGE_SCALE; - } + + /* Get MinVoltage and Frequency from DPM0, + * already converted to SMC_UL */ + sclk_frequency = data->dpm_table.sclk_table.dpm_levels[0].value; + result = polaris10_get_dependency_volt_by_clk(hwmgr, + table_info->vdd_dep_on_sclk, + sclk_frequency, + &table->ACPILevel.MinVoltage, &mvdd); + PP_ASSERT_WITH_CODE((0 == result), + "Cannot find ACPI VDDC voltage value " + "in Clock Dependency Table", + ); + result = polaris10_calculate_sclk_params(hwmgr, sclk_frequency, &(table->ACPILevel.SclkSetting)); PP_ASSERT_WITH_CODE(result == 0, "Error retrieving Engine Clock dividers from VBIOS.", return result); @@ -1463,24 +1460,18 @@ static int polaris10_populate_smc_acpi_level(struct pp_hwmgr *hwmgr, CONVERT_FROM_HOST_TO_SMC_US(table->ACPILevel.SclkSetting.Fcw1_frac); CONVERT_FROM_HOST_TO_SMC_US(table->ACPILevel.SclkSetting.Sclk_ss_slew_rate); - if (!data->mclk_dpm_key_disabled) { - /* Get MinVoltage and Frequency from DPM0, already converted to SMC_UL */ - table->MemoryACPILevel.MclkFrequency = - data->dpm_table.mclk_table.dpm_levels[0].value; - result = polaris10_get_dependency_volt_by_clk(hwmgr, - table_info->vdd_dep_on_mclk, - table->MemoryACPILevel.MclkFrequency, - &table->MemoryACPILevel.MinVoltage, &mvdd); - PP_ASSERT_WITH_CODE((0 == result), - "Cannot find ACPI VDDCI voltage value " - "in Clock Dependency Table", - ); - } else { - table->MemoryACPILevel.MclkFrequency = - data->vbios_boot_state.mclk_bootup_value; - table->MemoryACPILevel.MinVoltage = - data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE; - } + + /* Get MinVoltage and Frequency from DPM0, already converted to SMC_UL */ + table->MemoryACPILevel.MclkFrequency = + data->dpm_table.mclk_table.dpm_levels[0].value; + result = polaris10_get_dependency_volt_by_clk(hwmgr, + table_info->vdd_dep_on_mclk, + table->MemoryACPILevel.MclkFrequency, + &table->MemoryACPILevel.MinVoltage, &mvdd); + PP_ASSERT_WITH_CODE((0 == result), + "Cannot find ACPI VDDCI voltage value " + "in Clock Dependency Table", + ); us_mvdd = 0; if ((POLARIS10_VOLTAGE_CONTROL_NONE == data->mvdd_control) || @@ -1525,6 +1516,7 @@ static int polaris10_populate_smc_vce_level(struct pp_hwmgr *hwmgr, struct phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table = table_info->mm_dep_table; struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + uint32_t vddci; table->VceLevelCount = (uint8_t)(mm_table->count); table->VceBootLevel = 0; @@ -1534,9 +1526,18 @@ static int polaris10_populate_smc_vce_level(struct pp_hwmgr *hwmgr, table->VceLevel[count].MinVoltage = 0; table->VceLevel[count].MinVoltage |= (mm_table->entries[count].vddc * VOLTAGE_SCALE) << VDDC_SHIFT; + + if (POLARIS10_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control) + vddci = (uint32_t)phm_find_closest_vddci(&(data->vddci_voltage_table), + mm_table->entries[count].vddc - VDDC_VDDCI_DELTA); + else if (POLARIS10_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control) + vddci = mm_table->entries[count].vddc - VDDC_VDDCI_DELTA; + else + vddci = (data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE) << VDDCI_SHIFT; + + table->VceLevel[count].MinVoltage |= - ((mm_table->entries[count].vddc - data->vddc_vddci_delta) * - VOLTAGE_SCALE) << VDDCI_SHIFT; + (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT; table->VceLevel[count].MinVoltage |= 1 << PHASES_SHIFT; /*retrieve divider value for VBIOS */ @@ -1565,6 +1566,7 @@ static int polaris10_populate_smc_samu_level(struct pp_hwmgr *hwmgr, struct phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table = table_info->mm_dep_table; struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + uint32_t vddci; table->SamuBootLevel = 0; table->SamuLevelCount = (uint8_t)(mm_table->count); @@ -1575,8 +1577,16 @@ static int polaris10_populate_smc_samu_level(struct pp_hwmgr *hwmgr, table->SamuLevel[count].Frequency = mm_table->entries[count].samclock; table->SamuLevel[count].MinVoltage |= (mm_table->entries[count].vddc * VOLTAGE_SCALE) << VDDC_SHIFT; - table->SamuLevel[count].MinVoltage |= ((mm_table->entries[count].vddc - - data->vddc_vddci_delta) * VOLTAGE_SCALE) << VDDCI_SHIFT; + + if (POLARIS10_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control) + vddci = (uint32_t)phm_find_closest_vddci(&(data->vddci_voltage_table), + mm_table->entries[count].vddc - VDDC_VDDCI_DELTA); + else if (POLARIS10_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control) + vddci = mm_table->entries[count].vddc - VDDC_VDDCI_DELTA; + else + vddci = (data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE) << VDDCI_SHIFT; + + table->SamuLevel[count].MinVoltage |= (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT; table->SamuLevel[count].MinVoltage |= 1 << PHASES_SHIFT; /* retrieve divider value for VBIOS */ @@ -1659,6 +1669,7 @@ static int polaris10_populate_smc_uvd_level(struct pp_hwmgr *hwmgr, struct phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table = table_info->mm_dep_table; struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + uint32_t vddci; table->UvdLevelCount = (uint8_t)(mm_table->count); table->UvdBootLevel = 0; @@ -1669,8 +1680,16 @@ static int polaris10_populate_smc_uvd_level(struct pp_hwmgr *hwmgr, table->UvdLevel[count].DclkFrequency = mm_table->entries[count].dclk; table->UvdLevel[count].MinVoltage |= (mm_table->entries[count].vddc * VOLTAGE_SCALE) << VDDC_SHIFT; - table->UvdLevel[count].MinVoltage |= ((mm_table->entries[count].vddc - - data->vddc_vddci_delta) * VOLTAGE_SCALE) << VDDCI_SHIFT; + + if (POLARIS10_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control) + vddci = (uint32_t)phm_find_closest_vddci(&(data->vddci_voltage_table), + mm_table->entries[count].vddc - VDDC_VDDCI_DELTA); + else if (POLARIS10_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control) + vddci = mm_table->entries[count].vddc - VDDC_VDDCI_DELTA; + else + vddci = (data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE) << VDDCI_SHIFT; + + table->UvdLevel[count].MinVoltage |= (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT; table->UvdLevel[count].MinVoltage |= 1 << PHASES_SHIFT; /* retrieve divider value for VBIOS */ @@ -1691,8 +1710,8 @@ static int polaris10_populate_smc_uvd_level(struct pp_hwmgr *hwmgr, CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].VclkFrequency); CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].DclkFrequency); CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].MinVoltage); - } + return result; } -- cgit v1.2.3 From d9d533c1483c4daf76e7e720c35896a430563ff8 Mon Sep 17 00:00:00 2001 From: Ken Wang Date: Tue, 28 Jun 2016 13:28:50 +0800 Subject: drm/amdgpu: add ACLK_CNTL setting for polaris10 This is a temporary workaround for early boards. Signed-off-by: Ken Wang Reviewed-by: Rex Zhu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 1a5cbaff1e34..b2ebd4fef6cf 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -47,6 +47,8 @@ #include "dce/dce_10_0_d.h" #include "dce/dce_10_0_sh_mask.h" +#include "smu/smu_7_1_3_d.h" + #define GFX8_NUM_GFX_RINGS 1 #define GFX8_NUM_COMPUTE_RINGS 8 @@ -693,6 +695,7 @@ static void gfx_v8_0_init_golden_registers(struct amdgpu_device *adev) amdgpu_program_register_sequence(adev, polaris10_golden_common_all, (const u32)ARRAY_SIZE(polaris10_golden_common_all)); + WREG32_SMC(ixCG_ACLK_CNTL, 0x0000001C); break; case CHIP_CARRIZO: amdgpu_program_register_sequence(adev, -- cgit v1.2.3 From a7f14a184e0e8e94becfc3f9608f6b0f9c339572 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 28 Jun 2016 16:22:07 +0800 Subject: drm/amd/powerplay: workaround for UVD clock issue workaround issue that when uvd dpm disabled, uvd clock remain high on polaris10. Manually turn off the clocks. Signed-off-by: Rex Zhu Reviewed-by: Ken Wang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c index e19520c4b4b6..d9c88d13f8db 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c @@ -1106,6 +1106,10 @@ static void amdgpu_uvd_idle_work_handler(struct work_struct *work) if (fences == 0 && handles == 0) { if (adev->pm.dpm_enabled) { amdgpu_dpm_enable_uvd(adev, false); + /* just work around for uvd clock remain high even + * when uvd dpm disabled on Polaris10 */ + if (adev->asic_type == CHIP_POLARIS10) + amdgpu_asic_set_uvd_clocks(adev, 0, 0); } else { amdgpu_asic_set_uvd_clocks(adev, 0, 0); } -- cgit v1.2.3 From 91ff811f32763ea3135e832f7c1aeafc85ae1c98 Mon Sep 17 00:00:00 2001 From: Venkat Reddy Talla Date: Wed, 29 Jun 2016 15:31:27 +0530 Subject: regulator: max77620: check for valid regulator info SD4 regulator is not registered with regulator core framework in probe as there is no support in MAX77620 PMIC, removing SD4 entry from MAX77620 regulator information list and checking for valid regulator information data before configuring FPS source and FPS power up/down period to avoid NULL pointer exception if regulator not registered with core. Signed-off-by: Venkat Reddy Talla Signed-off-by: Mark Brown --- drivers/regulator/max77620-regulator.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c index 321e804aeab0..a1b49a6d538f 100644 --- a/drivers/regulator/max77620-regulator.c +++ b/drivers/regulator/max77620-regulator.c @@ -123,6 +123,9 @@ static int max77620_regulator_set_fps_src(struct max77620_regulator *pmic, unsigned int val; int ret; + if (!rinfo) + return 0; + switch (fps_src) { case MAX77620_FPS_SRC_0: case MAX77620_FPS_SRC_1: @@ -171,6 +174,9 @@ static int max77620_regulator_set_fps_slots(struct max77620_regulator *pmic, int pd = rpdata->active_fps_pd_slot; int ret = 0; + if (!rinfo) + return 0; + if (is_suspend) { pu = rpdata->suspend_fps_pu_slot; pd = rpdata->suspend_fps_pd_slot; @@ -680,7 +686,6 @@ static struct max77620_regulator_info max77620_regs_info[MAX77620_NUM_REGS] = { RAIL_SD(SD1, sd1, "in-sd1", SD1, 600000, 1550000, 12500, 0x22, SD1), RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE), RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE), - RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE), RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000), RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000), -- cgit v1.2.3 From 1bcbf42d2732b3fdaa8559b0dfc91567769e23c8 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 29 Jun 2016 11:19:32 -0700 Subject: nfit: fix format interface code byte order Per JEDEC Annex L Release 3 the SPD data is: Bits 9~5 00 000 = Function Undefined 00 001 = Byte addressable energy backed 00 010 = Block addressed 00 011 = Byte addressable, no energy backed All other codes reserved Bits 4~0 0 0000 = Proprietary interface 0 0001 = Standard interface 1 All other codes reserved; see Definitions of Functions ...and per the ACPI 6.1 spec: byte0: Bits 4~0 (0 or 1) byte1: Bits 9~5 (1, 2, or 3) ...so a format interface code displayed as 0x301 should be stored in the nfit as (0x1, 0x3), little-endian. Cc: Toshi Kani Cc: Rafael J. Wysocki Cc: Robert Moore Cc: Robert Elliott Link: https://bugzilla.kernel.org/show_bug.cgi?id=121161 Fixes: 30ec5fd464d5 ("nfit: fix format interface code byte order per ACPI6.1") Fixes: 5ad9a7fde07a ("acpi/nfit: Update nfit driver to comply with ACPI 6.1") Reported-by: Kristin Jacque Signed-off-by: Dan Williams --- drivers/acpi/nfit.c | 6 +++--- drivers/acpi/nfit.h | 10 +++++----- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c index 32579a7b71d5..ac6ddcc080d4 100644 --- a/drivers/acpi/nfit.c +++ b/drivers/acpi/nfit.c @@ -928,7 +928,7 @@ static ssize_t format_show(struct device *dev, { struct acpi_nfit_control_region *dcr = to_nfit_dcr(dev); - return sprintf(buf, "0x%04x\n", be16_to_cpu(dcr->code)); + return sprintf(buf, "0x%04x\n", le16_to_cpu(dcr->code)); } static DEVICE_ATTR_RO(format); @@ -961,8 +961,8 @@ static ssize_t format1_show(struct device *dev, continue; if (nfit_dcr->dcr->code == dcr->code) continue; - rc = sprintf(buf, "%#x\n", - be16_to_cpu(nfit_dcr->dcr->code)); + rc = sprintf(buf, "0x%04x\n", + le16_to_cpu(nfit_dcr->dcr->code)); break; } if (rc != ENXIO) diff --git a/drivers/acpi/nfit.h b/drivers/acpi/nfit.h index 11cb38348aef..02b9ea1e8d2e 100644 --- a/drivers/acpi/nfit.h +++ b/drivers/acpi/nfit.h @@ -53,12 +53,12 @@ enum nfit_uuids { }; /* - * Region format interface codes are stored as an array of bytes in the - * NFIT DIMM Control Region structure + * Region format interface codes are stored with the interface as the + * LSB and the function as the MSB. */ -#define NFIT_FIC_BYTE cpu_to_be16(0x101) /* byte-addressable energy backed */ -#define NFIT_FIC_BLK cpu_to_be16(0x201) /* block-addressable non-energy backed */ -#define NFIT_FIC_BYTEN cpu_to_be16(0x301) /* byte-addressable non-energy backed */ +#define NFIT_FIC_BYTE cpu_to_le16(0x101) /* byte-addressable energy backed */ +#define NFIT_FIC_BLK cpu_to_le16(0x201) /* block-addressable non-energy backed */ +#define NFIT_FIC_BYTEN cpu_to_le16(0x301) /* byte-addressable non-energy backed */ enum { NFIT_BLK_READ_FLUSH = 1, -- cgit v1.2.3 From f5ee3f2b5ad6881a8194b9f684ce11640d1062f7 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 6 Jun 2016 18:08:54 +0100 Subject: usb: host: ohci-st: Inform the reset framework that our reset line may be shared On the STiH410 B2120 development board the ST EHCI IP shares its reset line with the OHCI IP. New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Alan Stern Signed-off-by: Lee Jones --- drivers/usb/host/ohci-st.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-st.c b/drivers/usb/host/ohci-st.c index acf2eb2a5676..02816a1515a1 100644 --- a/drivers/usb/host/ohci-st.c +++ b/drivers/usb/host/ohci-st.c @@ -188,13 +188,15 @@ static int st_ohci_platform_probe(struct platform_device *dev) priv->clk48 = NULL; } - priv->pwr = devm_reset_control_get_optional(&dev->dev, "power"); + priv->pwr = + devm_reset_control_get_optional_shared(&dev->dev, "power"); if (IS_ERR(priv->pwr)) { err = PTR_ERR(priv->pwr); goto err_put_clks; } - priv->rst = devm_reset_control_get_optional(&dev->dev, "softreset"); + priv->rst = + devm_reset_control_get_optional_shared(&dev->dev, "softreset"); if (IS_ERR(priv->rst)) { err = PTR_ERR(priv->rst); goto err_put_clks; -- cgit v1.2.3 From 19599304625b74c95bff318c735928eec668b1ca Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 6 Jun 2016 18:08:53 +0100 Subject: usb: host: ehci-st: Inform the reset framework that our reset line may be shared On the STiH410 B2120 development board the ST EHCI IP shares its reset line with the OHCI IP. New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Peter Griffin Acked-by: Alan Stern Signed-off-by: Lee Jones --- drivers/usb/host/ehci-st.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-st.c b/drivers/usb/host/ehci-st.c index a94ed677d937..be4a2788fc58 100644 --- a/drivers/usb/host/ehci-st.c +++ b/drivers/usb/host/ehci-st.c @@ -206,7 +206,8 @@ static int st_ehci_platform_probe(struct platform_device *dev) priv->clk48 = NULL; } - priv->pwr = devm_reset_control_get_optional(&dev->dev, "power"); + priv->pwr = + devm_reset_control_get_optional_shared(&dev->dev, "power"); if (IS_ERR(priv->pwr)) { err = PTR_ERR(priv->pwr); if (err == -EPROBE_DEFER) @@ -214,7 +215,8 @@ static int st_ehci_platform_probe(struct platform_device *dev) priv->pwr = NULL; } - priv->rst = devm_reset_control_get_optional(&dev->dev, "softreset"); + priv->rst = + devm_reset_control_get_optional_shared(&dev->dev, "softreset"); if (IS_ERR(priv->rst)) { err = PTR_ERR(priv->rst); if (err == -EPROBE_DEFER) -- cgit v1.2.3 From 002f17bc54ff4005260d8e6e6700de97f5b25679 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 28 Jun 2016 09:23:58 +0100 Subject: usb: dwc3: st: Inform the reset framework that our reset line may be shared On the STiH410 B2120 development board the MiPHY28lp shares its reset line with the Synopsys DWC3 SuperSpeed (SS) USB 3.0 Dual-Role-Device (DRD). New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Felipe Balbi Signed-off-by: Lee Jones --- drivers/usb/dwc3/dwc3-st.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index 5c0adb9c6fb2..b204617ea4e6 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -237,7 +237,8 @@ static int st_dwc3_probe(struct platform_device *pdev) /* Manage PowerDown */ reset_control_deassert(dwc3_data->rstc_pwrdn); - dwc3_data->rstc_rst = devm_reset_control_get(dev, "softreset"); + dwc3_data->rstc_rst = + devm_reset_control_get_shared(dev, "softreset"); if (IS_ERR(dwc3_data->rstc_rst)) { dev_err(&pdev->dev, "could not get reset controller\n"); ret = PTR_ERR(dwc3_data->rstc_rst); -- cgit v1.2.3 From 9278e707f4e187df2b4d9eeb2bc78a1724fbe4ac Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 28 Jun 2016 09:32:12 +0100 Subject: phy: phy-stih407-usb: Inform the reset framework that our reset line may be shared On the STiH410 B2120 development board the ports on the Generic PHY share their reset lines with each other. New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Signed-off-by: Lee Jones --- drivers/phy/phy-stih407-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/phy-stih407-usb.c index 1d5ae5f8ef69..53cf8d1b4116 100644 --- a/drivers/phy/phy-stih407-usb.c +++ b/drivers/phy/phy-stih407-usb.c @@ -105,7 +105,7 @@ static int stih407_usb2_picophy_probe(struct platform_device *pdev) phy_dev->dev = dev; dev_set_drvdata(dev, phy_dev); - phy_dev->rstc = devm_reset_control_get(dev, "global"); + phy_dev->rstc = devm_reset_control_get_shared(dev, "global"); if (IS_ERR(phy_dev->rstc)) { dev_err(dev, "failed to ctrl picoPHY reset\n"); return PTR_ERR(phy_dev->rstc); -- cgit v1.2.3 From 82d8eb40bab10082050be945c8e7096df8e9f989 Mon Sep 17 00:00:00 2001 From: Rhyland Klein Date: Thu, 12 May 2016 13:45:04 -0400 Subject: mfd: max77620: Fix FPS switch statements When configuring FPS during probe, assuming a DT node is present for FPS, the code can run into a problem with the switch statements in max77620_config_fps() and max77620_get_fps_period_reg_value(). Namely, in the case of chip->chip_id == MAX77620, it will set fps_[mix|max]_period but then fall through to the default switch case and return -EINVAL. Returning this from max77620_config_fps() will cause probe to fail. Signed-off-by: Rhyland Klein Reviewed-by: Laxman Dewangan Reviewed-by: Thierry Reding Tested-by: Thierry Reding Tested-by: Alexandre Courbot Signed-off-by: Lee Jones --- drivers/mfd/max77620.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/max77620.c b/drivers/mfd/max77620.c index 199d261990be..f32fbb8e8129 100644 --- a/drivers/mfd/max77620.c +++ b/drivers/mfd/max77620.c @@ -203,6 +203,7 @@ static int max77620_get_fps_period_reg_value(struct max77620_chip *chip, break; case MAX77620: fps_min_period = MAX77620_FPS_PERIOD_MIN_US; + break; default: return -EINVAL; } @@ -236,6 +237,7 @@ static int max77620_config_fps(struct max77620_chip *chip, break; case MAX77620: fps_max_period = MAX77620_FPS_PERIOD_MAX_US; + break; default: return -EINVAL; } -- cgit v1.2.3 From cab103274352721b77fc5923a631fc63350bef8e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 13 Jun 2016 23:42:00 +0000 Subject: drm/i915: Fix missing unlock on error in i915_ppgtt_info() Add the missing unlock before return from function i915_ppgtt_info() in the error handling case. Fixes: 1d2ac403ae3b(drm: Protect dev->filelist with its own mutex) Signed-off-by: Wei Yongjun Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1465861320-26221-1-git-send-email-weiyj_lk@163.com (cherry picked from commit b0212486909de4f239ca9f20d032de1b1f2dc52e) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 32690332d441..103546834b60 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -2365,16 +2365,16 @@ static int i915_ppgtt_info(struct seq_file *m, void *data) task = get_pid_task(file->pid, PIDTYPE_PID); if (!task) { ret = -ESRCH; - goto out_put; + goto out_unlock; } seq_printf(m, "\nproc: %s\n", task->comm); put_task_struct(task); idr_for_each(&file_priv->context_idr, per_file_ctx, (void *)(unsigned long)m); } +out_unlock: mutex_unlock(&dev->filelist_mutex); -out_put: intel_runtime_pm_put(dev_priv); mutex_unlock(&dev->struct_mutex); -- cgit v1.2.3 From 54794580f5949253520265e46c903878ab222d84 Mon Sep 17 00:00:00 2001 From: Sinan Kaya Date: Wed, 29 Jun 2016 04:27:38 -0400 Subject: ACPI,PCI,IRQ: correct operator precedence The omitted parenthesis prevents the addition operation when acpi_penalize_isa_irq function is called. Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) Signed-off-by: Sinan Kaya Signed-off-by: Rafael J. Wysocki --- drivers/acpi/pci_link.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 8fc7323ed3e8..4ed4061813e6 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -839,7 +839,7 @@ void acpi_penalize_isa_irq(int irq, int active) { if ((irq >= 0) && (irq < ARRAY_SIZE(acpi_isa_irq_penalty))) acpi_isa_irq_penalty[irq] = acpi_irq_get_penalty(irq) + - active ? PIRQ_PENALTY_ISA_USED : PIRQ_PENALTY_PCI_USING; + (active ? PIRQ_PENALTY_ISA_USED : PIRQ_PENALTY_PCI_USING); } bool acpi_isa_irq_available(int irq) -- cgit v1.2.3 From 8293c8a3bb068bd2d2dfe00b6b0000a8fc5c860a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 Jun 2016 11:44:28 +0100 Subject: phy: miphy28lp: Inform the reset framework that our reset line may be shared On the STiH410 B2120 development board the MiPHY28lp shares its reset line with the Synopsys DWC3 SuperSpeed (SS) USB 3.0 Dual-Role-Device (DRD). New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Kishon Vijay Abraham I Signed-off-by: Lee Jones --- drivers/phy/phy-miphy28lp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/phy-miphy28lp.c index 3acd2a1808df..213e2e15339c 100644 --- a/drivers/phy/phy-miphy28lp.c +++ b/drivers/phy/phy-miphy28lp.c @@ -1143,7 +1143,8 @@ static int miphy28lp_probe_resets(struct device_node *node, struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; int err; - miphy_phy->miphy_rst = of_reset_control_get(node, "miphy-sw-rst"); + miphy_phy->miphy_rst = + of_reset_control_get_shared(node, "miphy-sw-rst"); if (IS_ERR(miphy_phy->miphy_rst)) { dev_err(miphy_dev->dev, -- cgit v1.2.3 From f5f35830fb84364a24794fe6c7101f85318481d2 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 28 Jun 2016 09:33:55 +0100 Subject: phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() API We're making all reset line users specify whether their lines are shared with other IP or they operate them exclusively. In this case the line is exclusively used only by this IP, so use the *_exclusive() API accordingly. Acked-by: Kishon Vijay Abraham I Signed-off-by: Lee Jones --- drivers/phy/phy-stih407-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/phy-stih407-usb.c index 53cf8d1b4116..b1f44ab669fb 100644 --- a/drivers/phy/phy-stih407-usb.c +++ b/drivers/phy/phy-stih407-usb.c @@ -111,7 +111,7 @@ static int stih407_usb2_picophy_probe(struct platform_device *pdev) return PTR_ERR(phy_dev->rstc); } - phy_dev->rstport = devm_reset_control_get(dev, "port"); + phy_dev->rstport = devm_reset_control_get_exclusive(dev, "port"); if (IS_ERR(phy_dev->rstport)) { dev_err(dev, "failed to ctrl picoPHY reset\n"); return PTR_ERR(phy_dev->rstport); -- cgit v1.2.3 From 5baaf3b9efe127d239038de9219d381f4d882b26 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 28 Jun 2016 09:24:40 +0100 Subject: usb: dwc3: st: Use explicit reset_control_get_exclusive() API We're making all reset line users specify whether their lines are shared with other IP or they operate them exclusively. In this case the line is exclusively used only by this IP, so use the *_exclusive() API accordingly. Acked-by: Felipe Balbi Signed-off-by: Lee Jones --- drivers/usb/dwc3/dwc3-st.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index b204617ea4e6..e77bacb8358a 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -227,7 +227,8 @@ static int st_dwc3_probe(struct platform_device *pdev) dev_vdbg(&pdev->dev, "glue-logic addr 0x%p, syscfg-reg offset 0x%x\n", dwc3_data->glue_base, dwc3_data->syscfg_reg_off); - dwc3_data->rstc_pwrdn = devm_reset_control_get(dev, "powerdown"); + dwc3_data->rstc_pwrdn = + devm_reset_control_get_exclusive(dev, "powerdown"); if (IS_ERR(dwc3_data->rstc_pwrdn)) { dev_err(&pdev->dev, "could not get power controller\n"); ret = PTR_ERR(dwc3_data->rstc_pwrdn); -- cgit v1.2.3