From 65ecc9c02dbad033a73a32916d17c107c5b25031 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Fri, 7 Sep 2012 19:06:24 +0100 Subject: 8250: blacklist Winbond CIR port The legacy serial driver will detect the Winbond CIR device as a serial port, since it looks exactly like a serial port unless you know what it is from the PNP ID. Here we track this port as a special PORT_8250_CIR type, preventing the legacy serial driver from probing it. Signed-off-by: Sean Young Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.c | 16 ++++++++++++++-- drivers/tty/serial/8250/8250_pnp.c | 20 +++++++++++++++----- 2 files changed, 29 insertions(+), 7 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index a2042c6673af..3ba4234592bc 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -290,6 +290,9 @@ static const struct serial8250_config uart_config[] = { UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00, .flags = UART_CAP_FIFO, }, + [PORT_8250_CIR] = { + .name = "CIR port" + } }; /* Uart divisor latch read */ @@ -1900,6 +1903,9 @@ static int serial8250_startup(struct uart_port *port) unsigned char lsr, iir; int retval; + if (port->type == PORT_8250_CIR) + return -ENODEV; + port->fifosize = uart_config[up->port.type].fifo_size; up->tx_loadsz = uart_config[up->port.type].tx_loadsz; up->capabilities = uart_config[up->port.type].flags; @@ -2557,7 +2563,10 @@ static int serial8250_request_port(struct uart_port *port) { struct uart_8250_port *up = container_of(port, struct uart_8250_port, port); - int ret = 0; + int ret; + + if (port->type == PORT_8250_CIR) + return -ENODEV; ret = serial8250_request_std_resource(up); if (ret == 0 && port->type == PORT_RSA) { @@ -2576,6 +2585,9 @@ static void serial8250_config_port(struct uart_port *port, int flags) int probeflags = PROBE_ANY; int ret; + if (port->type == PORT_8250_CIR) + return; + /* * Find the region that we can probe for. This in turn * tells us whether we can probe for the type of port. @@ -3147,7 +3159,7 @@ int serial8250_register_8250_port(struct uart_8250_port *up) mutex_lock(&serial_mutex); uart = serial8250_find_match_or_unused(&up->port); - if (uart) { + if (uart && uart->port.type != PORT_8250_CIR) { if (uart->port.dev) uart_remove_one_port(&serial8250_reg, &uart->port); diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index 28bf830603aa..f8ee25001dd0 100644 --- a/drivers/tty/serial/8250/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -25,7 +25,7 @@ #include "8250.h" #define UNKNOWN_DEV 0x3000 - +#define CIR_PORT 0x0800 static const struct pnp_device_id pnp_dev_table[] = { /* Archtek America Corp. */ @@ -362,6 +362,9 @@ static const struct pnp_device_id pnp_dev_table[] = { { "PNPCXXX", UNKNOWN_DEV }, /* More unknown PnP modems */ { "PNPDXXX", UNKNOWN_DEV }, + /* Winbond CIR port, should not be probed. We should keep track + of it to prevent the legacy serial driver from probing it */ + { "WEC1022", CIR_PORT }, { "", 0 } }; @@ -409,7 +412,7 @@ static int __devinit check_resources(struct pnp_dev *dev) * PnP modems, alternatively we must hardcode all modems in pnp_devices[] * table. */ -static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags) +static int __devinit serial_pnp_guess_board(struct pnp_dev *dev) { if (!(check_name(pnp_dev_name(dev)) || (dev->card && check_name(dev->card->name)))) @@ -428,7 +431,7 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) int ret, line, flags = dev_id->driver_data; if (flags & UNKNOWN_DEV) { - ret = serial_pnp_guess_board(dev, &flags); + ret = serial_pnp_guess_board(dev); if (ret < 0) return ret; } @@ -436,7 +439,10 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) memset(&uart, 0, sizeof(uart)); if (pnp_irq_valid(dev, 0)) uart.port.irq = pnp_irq(dev, 0); - if (pnp_port_valid(dev, 0)) { + if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) { + uart.port.iobase = pnp_port_start(dev, 2); + uart.port.iotype = UPIO_PORT; + } else if (pnp_port_valid(dev, 0)) { uart.port.iobase = pnp_port_start(dev, 0); uart.port.iotype = UPIO_PORT; } else if (pnp_mem_valid(dev, 0)) { @@ -451,6 +457,10 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n", uart.port.iobase, uart.port.mapbase, uart.port.irq, uart.port.iotype); #endif + if (flags & CIR_PORT) { + uart.port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE; + uart.port.type = PORT_8250_CIR; + } uart.port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE) @@ -459,7 +469,7 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) uart.port.dev = &dev->dev; line = serial8250_register_8250_port(&uart); - if (line < 0) + if (line < 0 || (flags & CIR_PORT)) return -ENODEV; pnp_set_drvdata(dev, (void *)((long)line + 1)); -- cgit v1.2.3