From d1479f6108006555fe33d7cfe8db4f95ad614b9a Mon Sep 17 00:00:00 2001 From: Mihail Atanassov Date: Thu, 9 Feb 2017 11:32:00 +0000 Subject: drm: mali-dp: Fix smart layer not going to composition Use rectangle 1 as a generic plane. Existing code already sets the smart layer bounding box size + offset. The rectangles' offsets are relative to the bounding box, so there is no need to set R1's offset (reset value is 0), just its size which is the same as the bounding box. Signed-off-by: Mihail Atanassov Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/malidp_hw.c | 2 +- drivers/gpu/drm/arm/malidp_planes.c | 18 ++++++++++++++++-- drivers/gpu/drm/arm/malidp_regs.h | 1 + 3 files changed, 18 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/arm/malidp_hw.c b/drivers/gpu/drm/arm/malidp_hw.c index 488aedf5b58d..9f5513006eee 100644 --- a/drivers/gpu/drm/arm/malidp_hw.c +++ b/drivers/gpu/drm/arm/malidp_hw.c @@ -83,7 +83,7 @@ static const struct malidp_layer malidp550_layers[] = { { DE_VIDEO1, MALIDP550_DE_LV1_BASE, MALIDP550_DE_LV1_PTR_BASE, MALIDP_DE_LV_STRIDE0 }, { DE_GRAPHICS1, MALIDP550_DE_LG_BASE, MALIDP550_DE_LG_PTR_BASE, MALIDP_DE_LG_STRIDE }, { DE_VIDEO2, MALIDP550_DE_LV2_BASE, MALIDP550_DE_LV2_PTR_BASE, MALIDP_DE_LV_STRIDE0 }, - { DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE, 0 }, + { DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE, MALIDP550_DE_LS_R1_STRIDE }, }; #define MALIDP_DE_DEFAULT_PREFETCH_START 5 diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c index 414aada10fe5..d5aec082294c 100644 --- a/drivers/gpu/drm/arm/malidp_planes.c +++ b/drivers/gpu/drm/arm/malidp_planes.c @@ -37,6 +37,8 @@ #define LAYER_V_VAL(x) (((x) & 0x1fff) << 16) #define MALIDP_LAYER_COMP_SIZE 0x010 #define MALIDP_LAYER_OFFSET 0x014 +#define MALIDP550_LS_ENABLE 0x01c +#define MALIDP550_LS_R1_IN_SIZE 0x020 /* * This 4-entry look-up-table is used to determine the full 8-bit alpha value @@ -242,6 +244,11 @@ static void malidp_de_plane_update(struct drm_plane *plane, LAYER_V_VAL(plane->state->crtc_y), mp->layer->base + MALIDP_LAYER_OFFSET); + if (mp->layer->id == DE_SMART) + malidp_hw_write(mp->hwdev, + LAYER_H_VAL(src_w) | LAYER_V_VAL(src_h), + mp->layer->base + MALIDP550_LS_R1_IN_SIZE); + /* first clear the rotation bits */ val = malidp_hw_read(mp->hwdev, mp->layer->base + MALIDP_LAYER_CONTROL); val &= ~LAYER_ROT_MASK; @@ -330,9 +337,16 @@ int malidp_de_planes_init(struct drm_device *drm) plane->hwdev = malidp->dev; plane->layer = &map->layers[i]; - /* Skip the features which the SMART layer doesn't have */ - if (id == DE_SMART) + if (id == DE_SMART) { + /* + * Enable the first rectangle in the SMART layer to be + * able to use it as a drm plane. + */ + malidp_hw_write(malidp->dev, 1, + plane->layer->base + MALIDP550_LS_ENABLE); + /* Skip the features which the SMART layer doesn't have. */ continue; + } drm_plane_create_rotation_property(&plane->base, DRM_ROTATE_0, flags); malidp_hw_write(malidp->dev, MALIDP_ALPHA_LUT, diff --git a/drivers/gpu/drm/arm/malidp_regs.h b/drivers/gpu/drm/arm/malidp_regs.h index aff6d4a84e99..b816067a65c5 100644 --- a/drivers/gpu/drm/arm/malidp_regs.h +++ b/drivers/gpu/drm/arm/malidp_regs.h @@ -84,6 +84,7 @@ /* Stride register offsets relative to Lx_BASE */ #define MALIDP_DE_LG_STRIDE 0x18 #define MALIDP_DE_LV_STRIDE0 0x18 +#define MALIDP550_DE_LS_R1_STRIDE 0x28 /* macros to set values into registers */ #define MALIDP_DE_H_FRONTPORCH(x) (((x) & 0xfff) << 0) -- cgit v1.2.3