From 42a2478b789cb1b4335909e0fecc721c07be7d90 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Fri, 2 Oct 2009 12:48:47 +0200
Subject: microblaze: GPIO reset support

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/setup.h         |   2 +
 arch/microblaze/kernel/Makefile             |   2 +-
 arch/microblaze/kernel/reset.c              | 138 ++++++++++++++++++++++++++++
 arch/microblaze/kernel/setup.c              |  29 ------
 arch/microblaze/platform/generic/system.dts |  28 ++++++
 arch/microblaze/platform/platform.c         |   2 +
 6 files changed, 171 insertions(+), 30 deletions(-)
 create mode 100644 arch/microblaze/kernel/reset.c

diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h
index ed67c9ed15b8..7f31394985e0 100644
--- a/arch/microblaze/include/asm/setup.h
+++ b/arch/microblaze/include/asm/setup.h
@@ -35,6 +35,8 @@ extern void mmu_reset(void);
 extern void early_console_reg_tlb_alloc(unsigned int addr);
 #   endif /* CONFIG_MMU */
 
+extern void of_platform_reset_gpio_probe(void);
+
 void time_init(void);
 void init_IRQ(void);
 void machine_early_init(const char *cmdline, unsigned int ram,
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index d487729683de..fddd0c403d40 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -7,7 +7,7 @@ extra-y := head.o vmlinux.lds
 obj-y += exceptions.o \
 	hw_exception_handler.o init_task.o intc.o irq.o of_device.o \
 	of_platform.o process.o prom.o prom_parse.o ptrace.o \
-	setup.o signal.o sys_microblaze.o timer.o traps.o
+	setup.o signal.o sys_microblaze.o timer.o traps.o reset.o
 
 obj-y += cpu/
 
diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c
new file mode 100644
index 000000000000..ce74a6f436e3
--- /dev/null
+++ b/arch/microblaze/kernel/reset.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <asm/prom.h>
+
+/* Trigger specific functions */
+#ifdef CONFIG_GPIOLIB
+
+#include <linux/of_gpio.h>
+
+static int handle; /* reset pin handle */
+
+static int of_reset_gpio_handle(void)
+{
+	int ret; /* variable which stored handle reset gpio pin */
+	struct device_node *root; /* root node */
+	struct device_node *gpio; /* gpio node */
+	struct of_gpio_chip *of_gc = NULL;
+	enum of_gpio_flags flags ;
+	const void *gpio_spec;
+
+	/* find out root node */
+	root = of_find_node_by_path("/");
+
+	/* give me handle for gpio node to be possible allocate pin */
+	ret = of_parse_phandles_with_args(root, "hard-reset-gpios",
+				"#gpio-cells", 0, &gpio, &gpio_spec);
+	if (ret) {
+		pr_debug("%s: can't parse gpios property\n", __func__);
+		goto err0;
+	}
+
+	of_gc = gpio->data;
+	if (!of_gc) {
+		pr_debug("%s: gpio controller %s isn't registered\n",
+			 root->full_name, gpio->full_name);
+		ret = -ENODEV;
+		goto err1;
+	}
+
+	ret = of_gc->xlate(of_gc, root, gpio_spec, &flags);
+	if (ret < 0)
+		goto err1;
+
+	ret += of_gc->gc.base;
+err1:
+	of_node_put(gpio);
+err0:
+	pr_debug("%s exited with status %d\n", __func__, ret);
+	return ret;
+}
+
+void of_platform_reset_gpio_probe(void)
+{
+	int ret;
+	handle = of_reset_gpio_handle();
+
+	if (!gpio_is_valid(handle)) {
+		printk(KERN_INFO "Skipping unavailable RESET gpio %d (%s)\n",
+				handle, "reset");
+	}
+
+	ret = gpio_request(handle, "reset");
+	if (ret < 0) {
+		printk(KERN_INFO "GPIO pin is already allocated\n");
+		return;
+	}
+
+	/* get current setup value */
+	ret = gpio_get_value(handle);
+	/* FIXME maybe worth to perform any action */
+	pr_debug("Reset: Gpio output state: 0x%x\n", ret);
+
+	/* Setup GPIO as output */
+	ret = gpio_direction_output(handle, 0);
+	if (ret < 0)
+		goto err;
+
+	/* Setup output direction */
+	gpio_set_value(handle, 0);
+
+	printk(KERN_INFO "Registered reset device: %d\n", handle);
+	return;
+err:
+	gpio_free(handle);
+	return;
+}
+
+
+static void gpio_system_reset(void)
+{
+	gpio_set_value(handle, 1);
+}
+#else
+#define gpio_system_reset() do {} while (0)
+void of_platform_reset_gpio_probe(void)
+{
+	return;
+}
+#endif
+
+void machine_restart(char *cmd)
+{
+	printk(KERN_NOTICE "Machine restart...\n");
+	gpio_system_reset();
+	dump_stack();
+	while (1)
+		;
+}
+
+void machine_shutdown(void)
+{
+	printk(KERN_NOTICE "Machine shutdown...\n");
+	while (1)
+		;
+}
+
+void machine_halt(void)
+{
+	printk(KERN_NOTICE "Machine halt...\n");
+	while (1)
+		;
+}
+
+void machine_power_off(void)
+{
+	printk(KERN_NOTICE "Machine power off...\n");
+	while (1)
+		;
+}
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 8c1e0f4dcf18..367ad330148e 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -186,32 +186,3 @@ static int microblaze_debugfs_init(void)
 }
 arch_initcall(microblaze_debugfs_init);
 #endif
-
-void machine_restart(char *cmd)
-{
-	printk(KERN_NOTICE "Machine restart...\n");
-	dump_stack();
-	while (1)
-		;
-}
-
-void machine_shutdown(void)
-{
-	printk(KERN_NOTICE "Machine shutdown...\n");
-	while (1)
-		;
-}
-
-void machine_halt(void)
-{
-	printk(KERN_NOTICE "Machine halt...\n");
-	while (1)
-		;
-}
-
-void machine_power_off(void)
-{
-	printk(KERN_NOTICE "Machine power off...\n");
-	while (1)
-		;
-}
diff --git a/arch/microblaze/platform/generic/system.dts b/arch/microblaze/platform/generic/system.dts
index 29993f62b30a..e00da8971c36 100644
--- a/arch/microblaze/platform/generic/system.dts
+++ b/arch/microblaze/platform/generic/system.dts
@@ -32,6 +32,7 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 	compatible = "xlnx,microblaze";
+	hard-reset-gpios = <&LEDs_8Bit 2 1>;
 	model = "testing";
 	DDR2_SDRAM: memory@90000000 {
 		device_type = "memory";
@@ -261,6 +262,33 @@
 			xlnx,is-dual = <0x0>;
 			xlnx,tri-default = <0xffffffff>;
 			xlnx,tri-default-2 = <0xffffffff>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		} ;
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&LEDs_8Bit 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&LEDs_8Bit 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&LEDs_8Bit 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&LEDs_8Bit 7 1>;
+			};
 		} ;
 		RS232_Uart_1: serial@84000000 {
 			clock-frequency = <125000000>;
diff --git a/arch/microblaze/platform/platform.c b/arch/microblaze/platform/platform.c
index 56e0234fa34b..5b89b58c5aed 100644
--- a/arch/microblaze/platform/platform.c
+++ b/arch/microblaze/platform/platform.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/of_platform.h>
 #include <asm/prom.h>
+#include <asm/setup.h>
 
 static struct of_device_id xilinx_of_bus_ids[] __initdata = {
 	{ .compatible = "simple-bus", },
@@ -26,6 +27,7 @@ static struct of_device_id xilinx_of_bus_ids[] __initdata = {
 static int __init microblaze_device_probe(void)
 {
 	of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
+	of_platform_reset_gpio_probe();
 	return 0;
 }
 device_initcall(microblaze_device_probe);
-- 
cgit v1.2.3


From 13cdee23296c437cdd0262a09c3455de8e1e85b2 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Fri, 30 Oct 2009 14:41:52 +0100
Subject: microblaze: __init_begin symbol must be aligned
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The problem was that free_initmem pass to  free_initrd_mem got
bad aligned __init_begin symbol and free_initrd_mem don't care
about __init_end but take PAGE_SIZE instead.

Here is behavior in kernel bootlog.
ramdisk_execute_command from (init/main.c) was rewrite

Freeing unused kernel memory: 6224k freed
Failed to execute ��������������{���
Failed to execute ��������������{����.  Attempting defaults...
Mounting proc:
Mounting var:

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/vmlinux.lds.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index e704188d7855..ecee15342e66 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -86,6 +86,7 @@ SECTIONS {
 		_KERNEL_SDA_BASE_ = _ssro + (_ssro_size / 2) ;
 	}
 
+	. = ALIGN(PAGE_SIZE);
 	__init_begin = .;
 
 	INIT_TEXT_SECTION(PAGE_SIZE)
-- 
cgit v1.2.3


From 7cf79d59ea650ae82868a99cc2954871d2a239bf Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Fri, 6 Nov 2009 12:27:25 +0100
Subject: microblaze: Add IRQENTRY_TEXT to lds

It is important for ftrace irqsoff support

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/vmlinux.lds.S | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index ecee15342e66..5ef619aad634 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -26,11 +26,12 @@ SECTIONS {
 		_stext = . ;
 		*(.text .text.*)
 		*(.fixup)
-               EXIT_TEXT
-               EXIT_CALL
+		EXIT_TEXT
+		EXIT_CALL
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		IRQENTRY_TEXT
 		. = ALIGN (4) ;
 		_etext = . ;
 	}
-- 
cgit v1.2.3


From 24b45a12c21132e78e14f3aedf74bb1297228072 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 10 Nov 2009 15:57:01 +0100
Subject: microblaze: Stack trace support

This is working implemetation but the problem is that
Microblaze misses frame pointer that's why is there
big loop which trace and show all addresses which are in text.
It shows addresses which are in registers, etc.

This is problem and this is the reason why all Microblaze
traces are wrong. There is an option to do hacks and trace
the kernel code but this is too complicated.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Kconfig             |  3 ++
 arch/microblaze/kernel/Makefile     |  1 +
 arch/microblaze/kernel/stacktrace.c | 65 +++++++++++++++++++++++++++++++++++++
 3 files changed, 69 insertions(+)
 create mode 100644 arch/microblaze/kernel/stacktrace.c

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index bbd8327f1890..8e1c4f7d3e6e 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -57,6 +57,9 @@ config GENERIC_GPIO
 config GENERIC_CSUM
 	def_bool y
 
+config STACKTRACE_SUPPORT
+	def_bool y
+
 config PCI
 	def_bool n
 
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index fddd0c403d40..c465a5c4669c 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -16,5 +16,6 @@ obj-$(CONFIG_SELFMOD)		+= selfmod.o
 obj-$(CONFIG_HEART_BEAT)	+= heartbeat.o
 obj-$(CONFIG_MODULES)		+= microblaze_ksyms.o module.o
 obj-$(CONFIG_MMU)		+= misc.o
+obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 
 obj-y	+= entry$(MMU).o
diff --git a/arch/microblaze/kernel/stacktrace.c b/arch/microblaze/kernel/stacktrace.c
new file mode 100644
index 000000000000..123692f22647
--- /dev/null
+++ b/arch/microblaze/kernel/stacktrace.c
@@ -0,0 +1,65 @@
+/*
+ * Stack trace support for Microblaze.
+ *
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <linux/thread_info.h>
+#include <linux/ptrace.h>
+#include <linux/module.h>
+
+/* FIXME initial support */
+void save_stack_trace(struct stack_trace *trace)
+{
+	unsigned long *sp;
+	unsigned long addr;
+	asm("addik %0, r1, 0" : "=r" (sp));
+
+	while (!kstack_end(sp)) {
+		addr = *sp++;
+		if (__kernel_text_address(addr)) {
+			if (trace->skip > 0)
+				trace->skip--;
+			else
+				trace->entries[trace->nr_entries++] = addr;
+
+			if (trace->nr_entries >= trace->max_entries)
+				break;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
+
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+	unsigned int *sp;
+	unsigned long addr;
+
+	struct thread_info *ti = task_thread_info(tsk);
+
+	if (tsk == current)
+		asm("addik %0, r1, 0" : "=r" (sp));
+	else
+		sp = (unsigned int *)ti->cpu_context.r1;
+
+	while (!kstack_end(sp)) {
+		addr = *sp++;
+		if (__kernel_text_address(addr)) {
+			if (trace->skip > 0)
+				trace->skip--;
+			else
+				trace->entries[trace->nr_entries++] = addr;
+
+			if (trace->nr_entries >= trace->max_entries)
+				break;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
-- 
cgit v1.2.3


From 519e9f417388ba055b7604db5f4f492f7c84f427 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Fri, 6 Nov 2009 12:31:00 +0100
Subject: microblaze: Register timecounter/cyclecounter

It is the same counter as we use as free running one.
I would like to use it for ftrace.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/timer.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index 5499deae7fa6..ed61b2f17719 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -183,6 +183,31 @@ static cycle_t microblaze_read(struct clocksource *cs)
 	return (cycle_t) (in_be32(TIMER_BASE + TCR1));
 }
 
+static struct timecounter microblaze_tc = {
+	.cc = NULL,
+};
+
+static cycle_t microblaze_cc_read(const struct cyclecounter *cc)
+{
+	return microblaze_read(NULL);
+}
+
+static struct cyclecounter microblaze_cc = {
+	.read = microblaze_cc_read,
+	.mask = CLOCKSOURCE_MASK(32),
+	.shift = 24,
+};
+
+int __init init_microblaze_timecounter(void)
+{
+	microblaze_cc.mult = div_sc(cpuinfo.cpu_clock_freq, NSEC_PER_SEC,
+				microblaze_cc.shift);
+
+	timecounter_init(&microblaze_tc, &microblaze_cc, sched_clock());
+
+	return 0;
+}
+
 static struct clocksource clocksource_microblaze = {
 	.name		= "microblaze_clocksource",
 	.rating		= 300,
@@ -204,6 +229,9 @@ static int __init microblaze_clocksource_init(void)
 	out_be32(TIMER_BASE + TCSR1, in_be32(TIMER_BASE + TCSR1) & ~TCSR_ENT);
 	/* start timer1 - up counting without interrupt */
 	out_be32(TIMER_BASE + TCSR1, TCSR_TINT|TCSR_ENT|TCSR_ARHT);
+
+	/* register timecounter - for ftrace support */
+	init_microblaze_timecounter();
 	return 0;
 }
 
-- 
cgit v1.2.3


From bf2d809668907c69b554459764b36584e4d57e4a Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 10 Dec 2009 12:07:02 +0100
Subject: microblaze: Lockdep support

Microblaze needs to do lock_init very soon because MMU init calls lock functions.

Here is the explanation from Peter Zijlstra why we have to enable
__ARCH_WANTS_INTERRUPTS_ON_CTSW.

"So we schedule while holding rq->lock (for obvious reasons), but since
lockdep tracks held locks per tasks, we need to transfer the held state
from the prev to the next task. We do this by explicity calling
spin_release(&rq->lock) in context_switch() right before switch_to(),
and calling spin_acquire(&rq->lock) in
finish_task_switch()->finish_lock_switch().

Now, for some reason lockdep thinks that interrupts got enabled over the
context switch (git grep __ARCH_WANTS_INTERRUPTS_ON_CTSW arch/microblaze
doesn't seem to turn up anything).

Clearly trying to acquire the rq->lock with interrupts enabled is a bad
idea and lockdep warns you about this."

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Kconfig              | 3 +++
 arch/microblaze/include/asm/system.h | 2 ++
 arch/microblaze/kernel/setup.c       | 2 ++
 3 files changed, 7 insertions(+)

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 8e1c4f7d3e6e..5ba4dcd56cad 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -60,6 +60,9 @@ config GENERIC_CSUM
 config STACKTRACE_SUPPORT
 	def_bool y
 
+config LOCKDEP_SUPPORT
+	def_bool y
+
 config PCI
 	def_bool n
 
diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h
index b1ed61590660..157970688b2a 100644
--- a/arch/microblaze/include/asm/system.h
+++ b/arch/microblaze/include/asm/system.h
@@ -16,6 +16,8 @@
 #include <asm-generic/cmpxchg.h>
 #include <asm-generic/cmpxchg-local.h>
 
+#define __ARCH_WANT_INTERRUPTS_ON_CTXSW
+
 struct task_struct;
 struct thread_info;
 
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 367ad330148e..acd70fe30a71 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -131,6 +131,8 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 		strlcpy(cmd_line, cmdline, COMMAND_LINE_SIZE);
 #endif
 
+	lockdep_init();
+
 /* initialize device tree for usage in early_printk */
 	early_init_devtree((void *)_fdt_start);
 
-- 
cgit v1.2.3


From fb5a32dc1ad7d6378363ad2eb7262edb5fba10f8 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 16 Nov 2009 09:09:47 +0100
Subject: microblaze: preliminary enabling for LATENCYTOP support in Kconfig

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 5ba4dcd56cad..57eeaa60ca69 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -63,6 +63,9 @@ config STACKTRACE_SUPPORT
 config LOCKDEP_SUPPORT
 	def_bool y
 
+config HAVE_LATENCYTOP_SUPPORT
+	def_bool y
+
 config PCI
 	def_bool n
 
-- 
cgit v1.2.3


From a3cd613b2e775eb59816c2c7c49c038d54917208 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Fri, 30 Oct 2009 12:26:53 +0100
Subject: microblaze: Add TRACE_IRQFLAGS_SUPPORT

There are just two major changes
Renamed local_irq functions to raw_local_irq in irq.c.
Added TRACE_IRQFLAGS_SUPPORT to Kconfig.debug.

Look at Documentation/irqflags-tracing.txt

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Kconfig.debug          |   3 +
 arch/microblaze/include/asm/irqflags.h | 112 +++++++++++++++------------------
 arch/microblaze/kernel/cpu/pvr.c       |   2 +-
 3 files changed, 54 insertions(+), 63 deletions(-)

diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug
index 242cd35bdb4b..9dc708a7f700 100644
--- a/arch/microblaze/Kconfig.debug
+++ b/arch/microblaze/Kconfig.debug
@@ -3,6 +3,9 @@
 
 menu "Kernel hacking"
 
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
 source "lib/Kconfig.debug"
 
 config EARLY_PRINTK
diff --git a/arch/microblaze/include/asm/irqflags.h b/arch/microblaze/include/asm/irqflags.h
index dea65645a4f8..2c38c6d80176 100644
--- a/arch/microblaze/include/asm/irqflags.h
+++ b/arch/microblaze/include/asm/irqflags.h
@@ -10,78 +10,73 @@
 #define _ASM_MICROBLAZE_IRQFLAGS_H
 
 #include <linux/irqflags.h>
+#include <asm/registers.h>
 
 # if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
 
-# define local_irq_save(flags)				\
+# define raw_local_irq_save(flags)			\
 	do {						\
-		asm volatile ("# local_irq_save	\n\t"	\
-				"msrclr %0, %1	\n\t"	\
-				"nop	\n\t"		\
+		asm volatile ("	msrclr %0, %1;		\
+				nop;"			\
 				: "=r"(flags)		\
 				: "i"(MSR_IE)		\
 				: "memory");		\
 	} while (0)
 
-# define local_irq_disable()					\
-	do {							\
-		asm volatile ("# local_irq_disable \n\t"	\
-				"msrclr r0, %0 \n\t"		\
-				"nop	\n\t"			\
-				:				\
-				: "i"(MSR_IE)			\
-				: "memory");			\
+# define raw_local_irq_disable()			\
+	do {						\
+		asm volatile ("	msrclr r0, %0;		\
+				nop;"			\
+				:			\
+				: "i"(MSR_IE)		\
+				: "memory");		\
 	} while (0)
 
-# define local_irq_enable()					\
-	do {							\
-		asm volatile ("# local_irq_enable \n\t"		\
-				"msrset	r0, %0 \n\t"		\
-				"nop	\n\t"			\
-				:				\
-				: "i"(MSR_IE)			\
-				: "memory");			\
+# define raw_local_irq_enable()				\
+	do {						\
+		asm volatile ("	msrset	r0, %0;		\
+				nop;"			\
+				:			\
+				: "i"(MSR_IE)		\
+				: "memory");		\
 	} while (0)
 
 # else /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR == 0 */
 
-# define local_irq_save(flags)					\
+# define raw_local_irq_save(flags)				\
 	do {							\
 		register unsigned tmp;				\
-		asm volatile ("# local_irq_save	\n\t"		\
-				"mfs	%0, rmsr \n\t"		\
-				"nop \n\t"			\
-				"andi	%1, %0, %2 \n\t"	\
-				"mts	rmsr, %1 \n\t"		\
-				"nop \n\t"			\
+		asm volatile ("	mfs	%0, rmsr;		\
+				nop;				\
+				andi	%1, %0, %2;		\
+				mts	rmsr, %1;		\
+				nop;"				\
 				: "=r"(flags), "=r" (tmp)	\
 				: "i"(~MSR_IE)			\
 				: "memory");			\
 	} while (0)
 
-# define local_irq_disable()					\
+# define raw_local_irq_disable()				\
 	do {							\
 		register unsigned tmp;				\
-		asm volatile ("# local_irq_disable \n\t"	\
-				"mfs	%0, rmsr \n\t"		\
-				"nop \n\t"			\
-				"andi	%0, %0, %1 \n\t"	\
-				"mts	rmsr, %0 \n\t"		\
-				"nop \n\t"			\
+		asm volatile ("	mfs	%0, rmsr;		\
+				nop;				\
+				andi	%0, %0, %1;		\
+				mts	rmsr, %0;		\
+				nop;"			\
 				: "=r"(tmp)			\
 				: "i"(~MSR_IE)			\
 				: "memory");			\
 	} while (0)
 
-# define local_irq_enable()					\
+# define raw_local_irq_enable()					\
 	do {							\
 		register unsigned tmp;				\
-		asm volatile ("# local_irq_enable \n\t"		\
-				"mfs	%0, rmsr \n\t"		\
-				"nop \n\t"			\
-				"ori	%0, %0, %1 \n\t"	\
-				"mts	rmsr, %0 \n\t"		\
-				"nop \n\t"			\
+		asm volatile ("	mfs	%0, rmsr;		\
+				nop;				\
+				ori	%0, %0, %1;		\
+				mts	rmsr, %0;		\
+				nop;"				\
 				: "=r"(tmp)			\
 				: "i"(MSR_IE)			\
 				: "memory");			\
@@ -89,35 +84,28 @@
 
 # endif /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */
 
-#define local_save_flags(flags)					\
+#define raw_local_irq_restore(flags)				\
 	do {							\
-		asm volatile ("# local_save_flags \n\t"		\
-				"mfs	%0, rmsr \n\t"		\
-				"nop	\n\t"			\
-				: "=r"(flags)			\
+		asm volatile ("	mts	rmsr, %0;		\
+				nop;"				\
 				:				\
+				: "r"(flags)			\
 				: "memory");			\
 	} while (0)
 
-#define local_irq_restore(flags)			\
-	do {						\
-		asm volatile ("# local_irq_restore \n\t"\
-				"mts	rmsr, %0 \n\t"	\
-				"nop	\n\t"		\
-				:			\
-				: "r"(flags)		\
-				: "memory");		\
-	} while (0)
-
-static inline int irqs_disabled(void)
+static inline unsigned long get_msr(void)
 {
 	unsigned long flags;
-
-	local_save_flags(flags);
-	return ((flags & MSR_IE) == 0);
+	asm volatile ("	mfs	%0, rmsr;	\
+			nop;"			\
+			: "=r"(flags)		\
+			:			\
+			: "memory");		\
+	return flags;
 }
 
-#define raw_irqs_disabled irqs_disabled
-#define raw_irqs_disabled_flags(flags)	((flags) == 0)
+#define raw_local_save_flags(flags)	((flags) = get_msr())
+#define raw_irqs_disabled()		((get_msr() & MSR_IE) == 0)
+#define raw_irqs_disabled_flags(flags)	((flags & MSR_IE) == 0)
 
 #endif /* _ASM_MICROBLAZE_IRQFLAGS_H */
diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c
index c9a4340ddd53..9bee9382bf74 100644
--- a/arch/microblaze/kernel/cpu/pvr.c
+++ b/arch/microblaze/kernel/cpu/pvr.c
@@ -45,7 +45,7 @@
 
 int cpu_has_pvr(void)
 {
-	unsigned flags;
+	unsigned long flags;
 	unsigned pvr0;
 
 	local_save_flags(flags);
-- 
cgit v1.2.3


From 2fd7c761a24c28e83d7194b4b4a099451126a503 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 16 Nov 2009 09:40:14 +0100
Subject: microblaze: ftrace: add static function tracer

If -pg of gcc is enabled with CONFIG_FUNCTION_TRACER=y. a calling to
_mcount will be inserted into each kernel function. so, there is a
possibility to trace the kernel functions in _mcount.

This patch add the specific _mcount support for static function
tracing. by default, ftrace_trace_function is initialized as
ftrace_stub(an empty function), so, the default _mcount will introduce
very little overhead. after enabling ftrace in user-space, it will jump
to a real tracing function and do static function tracing for us.

Commit message from Wu Zhangjin <wuzhangjin@gmail.com>

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Kconfig                   |   1 +
 arch/microblaze/include/asm/ftrace.h      |  14 ++++
 arch/microblaze/kernel/Makefile           |  11 ++++
 arch/microblaze/kernel/cpu/Makefile       |   4 ++
 arch/microblaze/kernel/mcount.S           | 105 ++++++++++++++++++++++++++++++
 arch/microblaze/kernel/microblaze_ksyms.c |   5 ++
 6 files changed, 140 insertions(+)
 create mode 100644 arch/microblaze/kernel/mcount.S

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 57eeaa60ca69..18003ca08196 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -6,6 +6,7 @@ mainmenu "Linux/Microblaze Kernel Configuration"
 config MICROBLAZE
 	def_bool y
 	select HAVE_LMB
+	select HAVE_FUNCTION_TRACER
 	select USB_ARCH_HAS_EHCI
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
diff --git a/arch/microblaze/include/asm/ftrace.h b/arch/microblaze/include/asm/ftrace.h
index 8b137891791f..22beec58c021 100644
--- a/arch/microblaze/include/asm/ftrace.h
+++ b/arch/microblaze/include/asm/ftrace.h
@@ -1 +1,15 @@
+#ifndef _ASM_MICROBLAZE_FTRACE
+#define _ASM_MICROBLAZE_FTRACE
 
+#ifdef CONFIG_FUNCTION_TRACER
+
+#define MCOUNT_ADDR		((long)(_mcount))
+#define MCOUNT_INSN_SIZE	8 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void _mcount(void);
+extern void ftrace_call_graph(void);
+#endif
+
+#endif /* CONFIG_FUNCTION_TRACER */
+#endif /* _ASM_MICROBLAZE_FTRACE */
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index c465a5c4669c..d5ee3264cd7d 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -2,6 +2,16 @@
 # Makefile
 #
 
+ifdef CONFIG_FUNCTION_TRACER
+# Do not trace early boot code and low level code
+CFLAGS_REMOVE_timer.o = -pg
+CFLAGS_REMOVE_intc.o = -pg
+CFLAGS_REMOVE_early_printk.o = -pg
+CFLAGS_REMOVE_selfmod.o = -pg
+CFLAGS_REMOVE_heartbeat.o = -pg
+CFLAGS_REMOVE_ftrace.o = -pg
+endif
+
 extra-y := head.o vmlinux.lds
 
 obj-y += exceptions.o \
@@ -17,5 +27,6 @@ obj-$(CONFIG_HEART_BEAT)	+= heartbeat.o
 obj-$(CONFIG_MODULES)		+= microblaze_ksyms.o module.o
 obj-$(CONFIG_MMU)		+= misc.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
+obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o
 
 obj-y	+= entry$(MMU).o
diff --git a/arch/microblaze/kernel/cpu/Makefile b/arch/microblaze/kernel/cpu/Makefile
index 20646e549271..59cc7bceaf8c 100644
--- a/arch/microblaze/kernel/cpu/Makefile
+++ b/arch/microblaze/kernel/cpu/Makefile
@@ -2,6 +2,10 @@
 # Build the appropriate CPU version support
 #
 
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_cache.o = -pg
+endif
+
 EXTRA_CFLAGS += -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \
 		-DCPU_REV=$(CPU_REV)
 
diff --git a/arch/microblaze/kernel/mcount.S b/arch/microblaze/kernel/mcount.S
new file mode 100644
index 000000000000..a257a1b75ed2
--- /dev/null
+++ b/arch/microblaze/kernel/mcount.S
@@ -0,0 +1,105 @@
+/*
+ * Low-level ftrace handling
+ *
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/linkage.h>
+
+#define NOALIGN_ENTRY(name)	.globl name; name:
+
+/* FIXME MS: I think that I don't need to save all regs */
+#define SAVE_REGS		\
+	addik	r1, r1, -120;	\
+	swi	r2, r1, 4;	\
+	swi	r3, r1, 8;	\
+	swi	r4, r1, 12;	\
+	swi	r5, r1, 116;	\
+	swi	r6, r1, 16;	\
+	swi	r7, r1, 20;	\
+	swi	r8, r1, 24;	\
+	swi	r9, r1, 28;	\
+	swi	r10, r1, 32;	\
+	swi	r11, r1, 36;	\
+	swi	r12, r1, 40;	\
+	swi	r13, r1, 44;	\
+	swi	r14, r1, 48;	\
+	swi	r16, r1, 52;	\
+	swi	r17, r1, 56;	\
+	swi	r18, r1, 60;	\
+	swi	r19, r1, 64;	\
+	swi	r20, r1, 68;	\
+	swi	r21, r1, 72;	\
+	swi	r22, r1, 76;	\
+	swi	r23, r1, 80;	\
+	swi	r24, r1, 84;	\
+	swi	r25, r1, 88;	\
+	swi	r26, r1, 92;	\
+	swi	r27, r1, 96;	\
+	swi	r28, r1, 100;	\
+	swi	r29, r1, 104;	\
+	swi	r30, r1, 108;	\
+	swi	r31, r1, 112;
+
+#define RESTORE_REGS		\
+	lwi	r2, r1, 4;	\
+	lwi	r3, r1, 8;	\
+	lwi	r4, r1, 12;	\
+	lwi	r5, r1, 116;	\
+	lwi	r6, r1, 16;	\
+	lwi	r7, r1, 20;	\
+	lwi	r8, r1, 24;	\
+	lwi	r9, r1, 28;	\
+	lwi	r10, r1, 32;	\
+	lwi	r11, r1, 36;	\
+	lwi	r12, r1, 40;	\
+	lwi	r13, r1, 44;	\
+	lwi	r14, r1, 48;	\
+	lwi	r16, r1, 52;	\
+	lwi	r17, r1, 56;	\
+	lwi	r18, r1, 60;	\
+	lwi	r19, r1, 64;	\
+	lwi	r20, r1, 68;	\
+	lwi	r21, r1, 72;	\
+	lwi	r22, r1, 76;	\
+	lwi	r23, r1, 80;	\
+	lwi	r24, r1, 84;	\
+	lwi	r25, r1, 88;	\
+	lwi	r26, r1, 92;	\
+	lwi	r27, r1, 96;	\
+	lwi	r28, r1, 100;	\
+	lwi	r29, r1, 104;	\
+	lwi	r30, r1, 108;	\
+	lwi	r31, r1, 112;	\
+	addik	r1, r1, 120;
+
+ENTRY(ftrace_stub)
+	rtsd	r15, 8;
+	nop;
+
+ENTRY(_mcount)
+	SAVE_REGS
+	swi	r15, r1, 0;
+	/* MS: test function trace if is taken or not */
+	lwi	r20, r0, ftrace_trace_function;
+	addik	r6, r0, ftrace_stub;
+	cmpu	r5, r20, r6; /* ftrace_trace_function != ftrace_stub */
+	beqid	r5, end; /* MS: not taken -> jump over */
+	nop;
+/* static normal trace */
+	lwi	r6, r1, 120; /* MS: load parent addr */
+	addik	r5, r15, 0; /* MS: load current function addr */
+	/* MS: here is dependency on previous code */
+	brald	r15, r20; /* MS: jump to ftrace handler */
+	nop;
+end:
+	lwi	r15, r1, 0;
+	RESTORE_REGS
+
+	rtsd	r15, 8; /* MS: jump back */
+	nop;
diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c
index 59ff20e33e0c..bc4dcb7d3861 100644
--- a/arch/microblaze/kernel/microblaze_ksyms.c
+++ b/arch/microblaze/kernel/microblaze_ksyms.c
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 #include <asm/page.h>
 #include <asm/system.h>
+#include <linux/ftrace.h>
 #include <linux/uaccess.h>
 
 /*
@@ -47,3 +48,7 @@ extern void __umodsi3(void);
 EXPORT_SYMBOL(__umodsi3);
 extern char *_ebss;
 EXPORT_SYMBOL_GPL(_ebss);
+#ifdef CONFIG_FUNCTION_TRACER
+extern void _mcount(void);
+EXPORT_SYMBOL(_mcount);
+#endif
-- 
cgit v1.2.3


From 6d9e60ce30a1be35491c74df00aaa25d869f8a02 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 16 Nov 2009 09:55:08 +0100
Subject: microblaze: ftrace: enable HAVE_FUNCTION_TRACE_MCOUNT_TEST

Implement MCOUNT_TEST in asm code - it is faster than use
generic code

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Kconfig         | 1 +
 arch/microblaze/kernel/mcount.S | 5 +++++
 2 files changed, 6 insertions(+)

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 18003ca08196..cccf3adfae50 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -7,6 +7,7 @@ config MICROBLAZE
 	def_bool y
 	select HAVE_LMB
 	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select USB_ARCH_HAS_EHCI
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
diff --git a/arch/microblaze/kernel/mcount.S b/arch/microblaze/kernel/mcount.S
index a257a1b75ed2..97eef3eea944 100644
--- a/arch/microblaze/kernel/mcount.S
+++ b/arch/microblaze/kernel/mcount.S
@@ -85,6 +85,11 @@ ENTRY(ftrace_stub)
 ENTRY(_mcount)
 	SAVE_REGS
 	swi	r15, r1, 0;
+	/* MS: HAVE_FUNCTION_TRACE_MCOUNT_TEST begin of checking */
+	lwi	r5, r0, function_trace_stop;
+	bneid	r5, end;
+	nop;
+	/* MS: HAVE_FUNCTION_TRACE_MCOUNT_TEST end of checking */
 	/* MS: test function trace if is taken or not */
 	lwi	r20, r0, ftrace_trace_function;
 	addik	r6, r0, ftrace_stub;
-- 
cgit v1.2.3


From 7d241ff0567b9503d79ee775c40927d09b509f83 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 10 Dec 2009 14:15:44 +0100
Subject: microblaze: ftrace: Add dynamic trace support

With dynamic function tracer, by default, _mcount is defined as an
"empty" function, it returns directly without any more action. When
enabling it in user-space, it will jump to a real tracing
function(ftrace_caller), and do the real job for us.

Differ from the static function tracer, dynamic function tracer provides
two functions ftrace_make_call()/ftrace_make_nop() to enable/disable the
tracing of some indicated kernel functions(set_ftrace_filter).

In the kernel version, there is only one "_mcount" string for every
kernel function, so, we just need to match this one in mcount_regex of
scripts/recordmcount.pl.

For more information please look at code and Documentation/trace folder.

Steven ACK that scripts/recordmcount.pl part.

Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Kconfig              |   2 +
 arch/microblaze/include/asm/ftrace.h |  11 +++
 arch/microblaze/kernel/Makefile      |   2 +-
 arch/microblaze/kernel/ftrace.c      | 151 +++++++++++++++++++++++++++++++++++
 arch/microblaze/kernel/mcount.S      |  13 +++
 scripts/recordmcount.pl              |   3 +
 6 files changed, 181 insertions(+), 1 deletion(-)
 create mode 100644 arch/microblaze/kernel/ftrace.c

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index cccf3adfae50..102d73aa1063 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -8,6 +8,8 @@ config MICROBLAZE
 	select HAVE_LMB
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE_MCOUNT_RECORD
 	select USB_ARCH_HAS_EHCI
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
diff --git a/arch/microblaze/include/asm/ftrace.h b/arch/microblaze/include/asm/ftrace.h
index 22beec58c021..fd2fa2eca62f 100644
--- a/arch/microblaze/include/asm/ftrace.h
+++ b/arch/microblaze/include/asm/ftrace.h
@@ -11,5 +11,16 @@ extern void _mcount(void);
 extern void ftrace_call_graph(void);
 #endif
 
+#ifdef CONFIG_DYNAMIC_FTRACE
+/* reloction of mcount call site is the same as the address */
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr;
+}
+
+struct dyn_arch_ftrace {
+};
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
 #endif /* CONFIG_FUNCTION_TRACER */
 #endif /* _ASM_MICROBLAZE_FTRACE */
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index d5ee3264cd7d..b07594eccf9b 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -27,6 +27,6 @@ obj-$(CONFIG_HEART_BEAT)	+= heartbeat.o
 obj-$(CONFIG_MODULES)		+= microblaze_ksyms.o module.o
 obj-$(CONFIG_MMU)		+= misc.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o
+obj-$(CONFIG_FUNCTION_TRACER)	+= ftrace.o mcount.o
 
 obj-y	+= entry$(MMU).o
diff --git a/arch/microblaze/kernel/ftrace.c b/arch/microblaze/kernel/ftrace.c
new file mode 100644
index 000000000000..c1889b101cb8
--- /dev/null
+++ b/arch/microblaze/kernel/ftrace.c
@@ -0,0 +1,151 @@
+/*
+ * Ftrace support for Microblaze.
+ *
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ *
+ * Based on MIPS and PowerPC ftrace code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <asm/cacheflush.h>
+#include <linux/ftrace.h>
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+/* save value to addr - it is save to do it in asm */
+static int ftrace_modify_code(unsigned long addr, unsigned int value)
+{
+	int faulted = 0;
+
+	__asm__ __volatile__("	1:	swi	%2, %1, 0;		\
+					addik	%0, r0, 0;		\
+				2:					\
+					.section .fixup, \"ax\";	\
+				3:	brid	2b;			\
+					addik	%0, r0, 1;		\
+					.previous;			\
+					.section __ex_table,\"a\";	\
+					.word	1b,3b;			\
+					.previous;"			\
+				: "=r" (faulted)
+				: "r" (addr), "r" (value)
+	);
+
+	if (unlikely(faulted))
+		return -EFAULT;
+
+	return 0;
+}
+
+#define MICROBLAZE_NOP 0x80000000
+#define MICROBLAZE_BRI 0xb800000C
+
+static unsigned int recorded; /* if save was or not */
+static unsigned int imm; /* saving whole imm instruction */
+
+/* There are two approaches howto solve ftrace_make nop function - look below */
+#undef USE_FTRACE_NOP
+
+#ifdef USE_FTRACE_NOP
+static unsigned int bralid; /* saving whole bralid instruction */
+#endif
+
+int ftrace_make_nop(struct module *mod,
+			struct dyn_ftrace *rec, unsigned long addr)
+{
+	/* we have this part of code which we are working with
+	 * b000c000        imm     -16384
+	 * b9fc8e30        bralid  r15, -29136     // c0008e30 <_mcount>
+	 * 80000000        or      r0, r0, r0
+	 *
+	 * The first solution (!USE_FTRACE_NOP-could be called branch solution)
+	 * b000c000        bri	12 (0xC - jump to any other instruction)
+	 * b9fc8e30        bralid  r15, -29136     // c0008e30 <_mcount>
+	 * 80000000        or      r0, r0, r0
+	 * any other instruction
+	 *
+	 * The second solution (USE_FTRACE_NOP) - no jump just nops
+	 * 80000000        or      r0, r0, r0
+	 * 80000000        or      r0, r0, r0
+	 * 80000000        or      r0, r0, r0
+	 */
+	int ret = 0;
+
+	if (recorded == 0) {
+		recorded = 1;
+		imm = *(unsigned int *)rec->ip;
+		pr_debug("%s: imm:0x%x\n", __func__, imm);
+#ifdef USE_FTRACE_NOP
+		bralid = *(unsigned int *)(rec->ip + 4);
+		pr_debug("%s: bralid 0x%x\n", __func__, bralid);
+#endif /* USE_FTRACE_NOP */
+	}
+
+#ifdef USE_FTRACE_NOP
+	ret = ftrace_modify_code(rec->ip, MICROBLAZE_NOP);
+	ret += ftrace_modify_code(rec->ip + 4, MICROBLAZE_NOP);
+#else /* USE_FTRACE_NOP */
+	ret = ftrace_modify_code(rec->ip, MICROBLAZE_BRI);
+#endif /* USE_FTRACE_NOP */
+	return ret;
+}
+
+static int ret_addr; /* initialized as 0 by default */
+
+/* I believe that first is called ftrace_make_nop before this function */
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	int ret;
+	ret_addr = addr; /* saving where the barrier jump is */
+	pr_debug("%s: addr:0x%x, rec->ip: 0x%x, imm:0x%x\n",
+		__func__, (unsigned int)addr, (unsigned int)rec->ip, imm);
+	ret = ftrace_modify_code(rec->ip, imm);
+#ifdef USE_FTRACE_NOP
+	pr_debug("%s: bralid:0x%x\n", __func__, bralid);
+	ret += ftrace_modify_code(rec->ip + 4, bralid);
+#endif /* USE_FTRACE_NOP */
+	return ret;
+}
+
+int __init ftrace_dyn_arch_init(void *data)
+{
+	/* The return code is retured via data */
+	*(unsigned long *)data = 0;
+
+	return 0;
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	unsigned long ip = (unsigned long)(&ftrace_call);
+	unsigned int upper = (unsigned int)func;
+	unsigned int lower = (unsigned int)func;
+	int ret = 0;
+
+	/* create proper saving to ftrace_call poll */
+	upper = 0xb0000000 + (upper >> 16); /* imm func_upper */
+	lower = 0x32800000 + (lower & 0xFFFF); /* addik r20, r0, func_lower */
+
+	pr_debug("%s: func=0x%x, ip=0x%x, upper=0x%x, lower=0x%x\n",
+		__func__, (unsigned int)func, (unsigned int)ip, upper, lower);
+
+	/* save upper and lower code */
+	ret = ftrace_modify_code(ip, upper);
+	ret += ftrace_modify_code(ip + 4, lower);
+
+	/* We just need to remove the rtsd r15, 8 by NOP */
+	BUG_ON(!ret_addr);
+	if (ret_addr)
+		ret += ftrace_modify_code(ret_addr, MICROBLAZE_NOP);
+	else
+		ret = 1; /* fault */
+
+	/* All changes are done - lets do caches consistent */
+	flush_icache();
+	return ret;
+}
+
+#endif /* CONFIG_DYNAMIC_FTRACE */
diff --git a/arch/microblaze/kernel/mcount.S b/arch/microblaze/kernel/mcount.S
index 97eef3eea944..30aaf8fb55b2 100644
--- a/arch/microblaze/kernel/mcount.S
+++ b/arch/microblaze/kernel/mcount.S
@@ -83,6 +83,12 @@ ENTRY(ftrace_stub)
 	nop;
 
 ENTRY(_mcount)
+#ifdef CONFIG_DYNAMIC_FTRACE
+ENTRY(ftrace_caller)
+	/* MS: It is just barrier which is removed from C code */
+	rtsd	r15, 8
+	nop
+#endif /* CONFIG_DYNAMIC_FTRACE */
 	SAVE_REGS
 	swi	r15, r1, 0;
 	/* MS: HAVE_FUNCTION_TRACE_MCOUNT_TEST begin of checking */
@@ -90,12 +96,19 @@ ENTRY(_mcount)
 	bneid	r5, end;
 	nop;
 	/* MS: HAVE_FUNCTION_TRACE_MCOUNT_TEST end of checking */
+#ifndef CONFIG_DYNAMIC_FTRACE
 	/* MS: test function trace if is taken or not */
 	lwi	r20, r0, ftrace_trace_function;
 	addik	r6, r0, ftrace_stub;
 	cmpu	r5, r20, r6; /* ftrace_trace_function != ftrace_stub */
 	beqid	r5, end; /* MS: not taken -> jump over */
 	nop;
+#else /* CONFIG_DYNAMIC_FTRACE */
+NOALIGN_ENTRY(ftrace_call)
+/* instruction for setup imm FUNC_part1, addik r20, r0, FUNC_part2 */
+	nop
+	nop
+#endif /* CONFIG_DYNAMIC_FTRACE */
 /* static normal trace */
 	lwi	r6, r1, 120; /* MS: load parent addr */
 	addik	r5, r15, 0; /* MS: load current function addr */
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index f0d14452632b..9cf0a6fad6ba 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -295,6 +295,9 @@ if ($arch eq "x86_64") {
     $ld .= " -m elf64_sparc";
     $cc .= " -m64";
     $objcopy .= " -O elf64-sparc";
+} elsif ($arch eq "microblaze") {
+    # Microblaze calls '_mcount' instead of plain 'mcount'.
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
 } else {
     die "Arch $arch is not supported with CONFIG_FTRACE_MCOUNT_RECORD";
 }
-- 
cgit v1.2.3


From a0d3e66522e8f6119f002cf31e5d92d7ae73b409 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 16 Nov 2009 10:32:10 +0100
Subject: microblaze: ftrace: add function graph support

For more information look at Documentation/trace folder.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Kconfig         |  1 +
 arch/microblaze/kernel/ftrace.c | 58 +++++++++++++++++++++++++++++++++++++++++
 arch/microblaze/kernel/mcount.S | 41 +++++++++++++++++++++++++++++
 3 files changed, 100 insertions(+)

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 102d73aa1063..e297802b8321 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -8,6 +8,7 @@ config MICROBLAZE
 	select HAVE_LMB
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select USB_ARCH_HAS_EHCI
diff --git a/arch/microblaze/kernel/ftrace.c b/arch/microblaze/kernel/ftrace.c
index c1889b101cb8..0952a8b52c35 100644
--- a/arch/microblaze/kernel/ftrace.c
+++ b/arch/microblaze/kernel/ftrace.c
@@ -14,6 +14,64 @@
 #include <asm/cacheflush.h>
 #include <linux/ftrace.h>
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in current thread info.
+ */
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+{
+	unsigned long old;
+	int faulted, err;
+	struct ftrace_graph_ent trace;
+	unsigned long return_hooker = (unsigned long)
+				&return_to_handler;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	/*
+	 * Protect against fault, even if it shouldn't
+	 * happen. This tool is too much intrusive to
+	 * ignore such a protection.
+	 */
+	asm volatile("	1:	lwi	%0, %2, 0;		\
+			2:	swi	%3, %2, 0;		\
+				addik	%1, r0, 0;		\
+			3:					\
+				.section .fixup, \"ax\";	\
+			4:	brid	3b;			\
+				addik	%1, r0, 1;		\
+				.previous;			\
+				.section __ex_table,\"a\";	\
+				.word	1b,4b;			\
+				.word	2b,4b;			\
+				.previous;"			\
+			: "=&r" (old), "=r" (faulted)
+			: "r" (parent), "r" (return_hooker)
+	);
+
+	if (unlikely(faulted)) {
+		ftrace_graph_stop();
+		WARN_ON(1);
+		return;
+	}
+
+	err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0);
+	if (err == -EBUSY) {
+		*parent = old;
+		return;
+	}
+
+	trace.func = self_addr;
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		*parent = old;
+	}
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
 #ifdef CONFIG_DYNAMIC_FTRACE
 /* save value to addr - it is save to do it in asm */
 static int ftrace_modify_code(unsigned long addr, unsigned int value)
diff --git a/arch/microblaze/kernel/mcount.S b/arch/microblaze/kernel/mcount.S
index 30aaf8fb55b2..84a19458c74d 100644
--- a/arch/microblaze/kernel/mcount.S
+++ b/arch/microblaze/kernel/mcount.S
@@ -96,6 +96,27 @@ ENTRY(ftrace_caller)
 	bneid	r5, end;
 	nop;
 	/* MS: HAVE_FUNCTION_TRACE_MCOUNT_TEST end of checking */
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	lwi	r5, r0, ftrace_graph_return;
+	addik	r6, r0, ftrace_stub; /* asm implementation */
+	cmpu	r5, r5, r6; /* ftrace_graph_return != ftrace_stub */
+	beqid	r5, end_graph_tracer;
+	nop;
+
+	lwi	r6, r0, ftrace_graph_entry;
+	addik	r5, r0, ftrace_graph_entry_stub; /* implemented in C */
+	cmpu	r5, r5, r6; /* ftrace_graph_entry != ftrace_graph_entry_stub */
+	beqid	r5, end_graph_tracer;
+	nop;
+	addik	r5, r1, 120; /* MS: load parent addr */
+	addik	r6, r15, 0; /* MS: load current function addr */
+	bralid	r15, prepare_ftrace_return;
+	nop;
+	/* MS: graph was taken that's why - can jump over function trace */
+	brid	end;
+	nop;
+end_graph_tracer:
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 #ifndef CONFIG_DYNAMIC_FTRACE
 	/* MS: test function trace if is taken or not */
 	lwi	r20, r0, ftrace_trace_function;
@@ -121,3 +142,23 @@ end:
 
 	rtsd	r15, 8; /* MS: jump back */
 	nop;
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ENTRY(return_to_handler)
+	nop; /* MS: just barrier for rtsd r15, 8 */
+	nop;
+	SAVE_REGS
+	swi	r15, r1, 0;
+
+	/* MS: find out returning address */
+	bralid	r15, ftrace_return_to_handler;
+	nop;
+
+	/* MS: return value from ftrace_return_to_handler is my returning addr
+	 * must be before restore regs because I have to restore r3 content */
+	addik	r15, r3, 0;
+	RESTORE_REGS
+
+	rtsd	r15, 8; /* MS: jump back */
+	nop;
+#endif	/* CONFIG_FUNCTION_TRACER */
-- 
cgit v1.2.3


From 4f911b0daf0f7028a4fe792b701a48d10da36d84 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 16 Nov 2009 10:34:15 +0100
Subject: microblaze: ftrace: Add dynamic function graph tracer

This patch add support for dynamic function graph tracer.

There is one my expactation that I can do flush_icache after
all code modification. On microblaze is this safer than do
flush for every entry. For icache is used name flush but
correct should be invalidation - this will be fix in upcomming
new cache implementaion and WB support.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/ftrace.c | 28 ++++++++++++++++++++++++++++
 arch/microblaze/kernel/mcount.S |  6 ++++++
 2 files changed, 34 insertions(+)

diff --git a/arch/microblaze/kernel/ftrace.c b/arch/microblaze/kernel/ftrace.c
index 0952a8b52c35..388b31ca65a1 100644
--- a/arch/microblaze/kernel/ftrace.c
+++ b/arch/microblaze/kernel/ftrace.c
@@ -206,4 +206,32 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 	return ret;
 }
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+unsigned int old_jump; /* saving place for jump instruction */
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	unsigned int ret;
+	unsigned long ip = (unsigned long)(&ftrace_call_graph);
+
+	old_jump = *(unsigned int *)ip; /* save jump over instruction */
+	ret = ftrace_modify_code(ip, MICROBLAZE_NOP);
+	flush_icache();
+
+	pr_debug("%s: Replace instruction: 0x%x\n", __func__, old_jump);
+	return ret;
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	unsigned int ret;
+	unsigned long ip = (unsigned long)(&ftrace_call_graph);
+
+	ret = ftrace_modify_code(ip, old_jump);
+	flush_icache();
+
+	pr_debug("%s\n", __func__);
+	return ret;
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 #endif /* CONFIG_DYNAMIC_FTRACE */
diff --git a/arch/microblaze/kernel/mcount.S b/arch/microblaze/kernel/mcount.S
index 84a19458c74d..e7eaa7a8cbd3 100644
--- a/arch/microblaze/kernel/mcount.S
+++ b/arch/microblaze/kernel/mcount.S
@@ -97,6 +97,7 @@ ENTRY(ftrace_caller)
 	nop;
 	/* MS: HAVE_FUNCTION_TRACE_MCOUNT_TEST end of checking */
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifndef CONFIG_DYNAMIC_FTRACE
 	lwi	r5, r0, ftrace_graph_return;
 	addik	r6, r0, ftrace_stub; /* asm implementation */
 	cmpu	r5, r5, r6; /* ftrace_graph_return != ftrace_stub */
@@ -108,6 +109,11 @@ ENTRY(ftrace_caller)
 	cmpu	r5, r5, r6; /* ftrace_graph_entry != ftrace_graph_entry_stub */
 	beqid	r5, end_graph_tracer;
 	nop;
+#else /* CONFIG_DYNAMIC_FTRACE */
+NOALIGN_ENTRY(ftrace_call_graph)
+	/* MS: jump over graph function - replaced from C code */
+	bri	end_graph_tracer
+#endif /* CONFIG_DYNAMIC_FTRACE */
 	addik	r5, r1, 120; /* MS: load parent addr */
 	addik	r6, r15, 0; /* MS: load current function addr */
 	bralid	r15, prepare_ftrace_return;
-- 
cgit v1.2.3


From 5dd48a235c3f78620e582ebb253d64d02747d173 Mon Sep 17 00:00:00 2001
From: "steve@digidescorp.com" <steve@digidescorp.com>
Date: Fri, 13 Nov 2009 16:08:29 -0600
Subject: microblaze: Fix pfn_valid() for noMMU

Configuring DEBUG_SLAB causes a noMMU kernel to die during initialization
with an invalid virtual address panic in kfree_debugcheck().
The panic is due to an improper definition of pfn_valid().

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/page.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index 880c988c2237..9b66c0fa9a32 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -164,7 +164,8 @@ extern int page_is_ram(unsigned long pfn);
 #  endif /* CONFIG_MMU */
 
 #  ifndef CONFIG_MMU
-#  define pfn_valid(pfn)	((pfn) >= min_low_pfn && (pfn) <= max_mapnr)
+#  define pfn_valid(pfn)	(((pfn) >= min_low_pfn) && \
+				((pfn) <= (min_low_pfn + max_mapnr)))
 #  define ARCH_PFN_OFFSET	(PAGE_OFFSET >> PAGE_SHIFT)
 #  else /* CONFIG_MMU */
 #  define ARCH_PFN_OFFSET	(memory_start >> PAGE_SHIFT)
-- 
cgit v1.2.3


From f7816e284b72820b295b2d377cc635d7305f6728 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Fri, 13 Nov 2009 08:26:49 +0100
Subject: microblaze: Remove saving and restoring before calling signal code

Saving is done in SAVE_STATE macros that's why another save discard
previous saved value.

This change has no effect to normal programs because they ends in any exception
and they are killed. On the other side has effect on debugging.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/entry.S | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index e3ecb36dd554..7417d9ad0d18 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -711,15 +711,11 @@ C_ENTRY(ret_from_exc):
 	 * (in a possibly modified form) after do_signal returns.
 	 * store return registers separately because this macros is use
 	 * for others exceptions */
-	swi	r3, r1, PTO + PT_R3;
-	swi	r4, r1, PTO + PT_R4;
 	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
 	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 	addi	r7, r0, 0;		/* Arg 3: int in_syscall */
 	bralid	r15, do_signal;	/* Handle any signals */
 	nop;
-	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	lwi	r4, r1, PTO+PT_R4;
 
 /* Finally, return to user state.  */
 1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
-- 
cgit v1.2.3


From 753758304019fc7c2ef3af674f52a193b1606d15 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 29 Oct 2009 08:58:15 +0100
Subject: microblaze: Fix announce message for reset gpio

I had to change message for gpio-reset because I always
not to see it. Prefix RESET is big and visible.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/reset.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c
index ce74a6f436e3..789af930d72c 100644
--- a/arch/microblaze/kernel/reset.c
+++ b/arch/microblaze/kernel/reset.c
@@ -87,7 +87,7 @@ void of_platform_reset_gpio_probe(void)
 	/* Setup output direction */
 	gpio_set_value(handle, 0);
 
-	printk(KERN_INFO "Registered reset device: %d\n", handle);
+	printk(KERN_INFO "RESET: Registered gpio device: %d\n", handle);
 	return;
 err:
 	gpio_free(handle);
-- 
cgit v1.2.3


From 67bf87665466c4ea93e2c54d66dfd4cdac011a4b Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 29 Oct 2009 10:12:59 +0100
Subject: microblaze: Support both levels for reset

Till this patch reset always perform writen to 1.
Now we can use negative logic and perform reset write to 0.

It is opposite level than is currently read from that pin

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/reset.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c
index 789af930d72c..a1721a33042e 100644
--- a/arch/microblaze/kernel/reset.c
+++ b/arch/microblaze/kernel/reset.c
@@ -17,6 +17,7 @@
 #include <linux/of_gpio.h>
 
 static int handle; /* reset pin handle */
+static unsigned int reset_val;
 
 static int of_reset_gpio_handle(void)
 {
@@ -75,9 +76,9 @@ void of_platform_reset_gpio_probe(void)
 	}
 
 	/* get current setup value */
-	ret = gpio_get_value(handle);
+	reset_val = gpio_get_value(handle);
 	/* FIXME maybe worth to perform any action */
-	pr_debug("Reset: Gpio output state: 0x%x\n", ret);
+	pr_debug("Reset: Gpio output state: 0x%x\n", reset_val);
 
 	/* Setup GPIO as output */
 	ret = gpio_direction_output(handle, 0);
@@ -87,7 +88,8 @@ void of_platform_reset_gpio_probe(void)
 	/* Setup output direction */
 	gpio_set_value(handle, 0);
 
-	printk(KERN_INFO "RESET: Registered gpio device: %d\n", handle);
+	printk(KERN_INFO "RESET: Registered gpio device: %d, current val: %d\n",
+							handle, reset_val);
 	return;
 err:
 	gpio_free(handle);
@@ -97,7 +99,7 @@ err:
 
 static void gpio_system_reset(void)
 {
-	gpio_set_value(handle, 1);
+	gpio_set_value(handle, 1 - reset_val);
 }
 #else
 #define gpio_system_reset() do {} while (0)
-- 
cgit v1.2.3


From 6cec713b1629228527fb8f813003522817f55da1 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 15 Oct 2009 13:34:31 +0200
Subject: microblaze: Detect new 7.20.d version

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/cpu/cpuinfo.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index 3539babc1c18..a9aa5cf11c39 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -29,6 +29,7 @@ const struct cpu_ver_key cpu_ver_lookup[] = {
 	{"7.20.a", 0x0c},
 	{"7.20.b", 0x0d},
 	{"7.20.c", 0x0e},
+	{"7.20.d", 0x0f},
 	/* FIXME There is no keycode defined in MBV for these versions */
 	{"2.10.a", 0x10},
 	{"3.00.a", 0x20},
-- 
cgit v1.2.3


From 44e4e196a9b3a703ebe273ffe3fb6cda326fe5d3 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 8 Oct 2009 13:06:42 +0200
Subject: microblaze: Fix cache_line_lenght

We used cache_line as cache_line_lenght. For this reason
we did cache flushing 4 times longer than was necessary.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/cpuinfo.h         |  4 ++--
 arch/microblaze/kernel/cpu/cache.c            | 16 ++++++++--------
 arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c |  4 ++--
 arch/microblaze/kernel/cpu/cpuinfo-static.c   | 16 ++++++++--------
 4 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/microblaze/include/asm/cpuinfo.h b/arch/microblaze/include/asm/cpuinfo.h
index 52f28f6dc4eb..aadf7a899d49 100644
--- a/arch/microblaze/include/asm/cpuinfo.h
+++ b/arch/microblaze/include/asm/cpuinfo.h
@@ -43,7 +43,7 @@ struct cpuinfo {
 	u32 use_icache;
 	u32 icache_tagbits;
 	u32 icache_write;
-	u32 icache_line;
+	u32 icache_line_length;
 	u32 icache_size;
 	unsigned long icache_base;
 	unsigned long icache_high;
@@ -51,7 +51,7 @@ struct cpuinfo {
 	u32 use_dcache;
 	u32 dcache_tagbits;
 	u32 dcache_write;
-	u32 dcache_line;
+	u32 dcache_line_length;
 	u32 dcache_size;
 	unsigned long dcache_base;
 	unsigned long dcache_high;
diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c
index af866a450125..538f1df6761d 100644
--- a/arch/microblaze/kernel/cpu/cache.c
+++ b/arch/microblaze/kernel/cpu/cache.c
@@ -140,7 +140,7 @@ void __invalidate_icache_all(void)
 		/* Just loop through cache size and invalidate, no need to add
 			CACHE_BASE address */
 		for (i = 0; i < cpuinfo.icache_size;
-			i += cpuinfo.icache_line)
+			i += cpuinfo.icache_line_length)
 				__invalidate_icache(i);
 
 		__enable_icache();
@@ -160,15 +160,15 @@ void __invalidate_icache_range(unsigned long start, unsigned long end)
 		 * just cover cache footprint
 		 */
 		end = min(start + cpuinfo.icache_size, end);
-		align = ~(cpuinfo.icache_line - 1);
+		align = ~(cpuinfo.icache_line_length - 1);
 		start &= align; /* Make sure we are aligned */
 		/* Push end up to the next cache line */
-		end = ((end & align) + cpuinfo.icache_line);
+		end = ((end & align) + cpuinfo.icache_line_length);
 
 		local_irq_save(flags);
 		__disable_icache();
 
-		for (i = start; i < end; i += cpuinfo.icache_line)
+		for (i = start; i < end; i += cpuinfo.icache_line_length)
 			__invalidate_icache(i);
 
 		__enable_icache();
@@ -207,7 +207,7 @@ void __invalidate_dcache_all(void)
 		 * no need to add CACHE_BASE address
 		 */
 		for (i = 0; i < cpuinfo.dcache_size;
-			i += cpuinfo.dcache_line)
+			i += cpuinfo.dcache_line_length)
 				__invalidate_dcache(i);
 
 		__enable_dcache();
@@ -227,14 +227,14 @@ void __invalidate_dcache_range(unsigned long start, unsigned long end)
 		 * just cover cache footprint
 		 */
 		end = min(start + cpuinfo.dcache_size, end);
-		align = ~(cpuinfo.dcache_line - 1);
+		align = ~(cpuinfo.dcache_line_length - 1);
 		start &= align; /* Make sure we are aligned */
 		/* Push end up to the next cache line */
-		end = ((end & align) + cpuinfo.dcache_line);
+		end = ((end & align) + cpuinfo.dcache_line_length);
 		local_irq_save(flags);
 		__disable_dcache();
 
-		for (i = start; i < end; i += cpuinfo.dcache_line)
+		for (i = start; i < end; i += cpuinfo.dcache_line_length)
 			__invalidate_dcache(i);
 
 		__enable_dcache();
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
index c259786e7faa..c5acf2b56eed 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
@@ -70,7 +70,7 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
 	CI(use_icache, USE_ICACHE);
 	CI(icache_tagbits, ICACHE_ADDR_TAG_BITS);
 	CI(icache_write, ICACHE_ALLOW_WR);
-	CI(icache_line, ICACHE_LINE_LEN);
+	ci->icache_line_length = PVR_ICACHE_LINE_LEN(pvr) << 2;
 	CI(icache_size, ICACHE_BYTE_SIZE);
 	CI(icache_base, ICACHE_BASEADDR);
 	CI(icache_high, ICACHE_HIGHADDR);
@@ -78,7 +78,7 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
 	CI(use_dcache, USE_DCACHE);
 	CI(dcache_tagbits, DCACHE_ADDR_TAG_BITS);
 	CI(dcache_write, DCACHE_ALLOW_WR);
-	CI(dcache_line, DCACHE_LINE_LEN);
+	ci->dcache_line_length = PVR_DCACHE_LINE_LEN(pvr) << 2;
 	CI(dcache_size, DCACHE_BYTE_SIZE);
 	CI(dcache_base, DCACHE_BASEADDR);
 	CI(dcache_high, DCACHE_HIGHADDR);
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c
index adb448f93d5f..6558429eb973 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-static.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c
@@ -72,12 +72,12 @@ void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
 	ci->use_icache = fcpu(cpu, "xlnx,use-icache");
 	ci->icache_tagbits = fcpu(cpu, "xlnx,addr-tag-bits");
 	ci->icache_write = fcpu(cpu, "xlnx,allow-icache-wr");
-	ci->icache_line = fcpu(cpu, "xlnx,icache-line-len") << 2;
-	if (!ci->icache_line) {
+	ci->icache_line_length = fcpu(cpu, "xlnx,icache-line-len") << 2;
+	if (!ci->icache_line_length) {
 		if (fcpu(cpu, "xlnx,icache-use-fsl"))
-			ci->icache_line = 4 << 2;
+			ci->icache_line_length = 4 << 2;
 		else
-			ci->icache_line = 1 << 2;
+			ci->icache_line_length = 1 << 2;
 	}
 	ci->icache_size = fcpu(cpu, "i-cache-size");
 	ci->icache_base = fcpu(cpu, "i-cache-baseaddr");
@@ -86,12 +86,12 @@ void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
 	ci->use_dcache = fcpu(cpu, "xlnx,use-dcache");
 	ci->dcache_tagbits = fcpu(cpu, "xlnx,dcache-addr-tag");
 	ci->dcache_write = fcpu(cpu, "xlnx,allow-dcache-wr");
-	ci->dcache_line = fcpu(cpu, "xlnx,dcache-line-len") << 2;
-	if (!ci->dcache_line) {
+	ci->dcache_line_length = fcpu(cpu, "xlnx,dcache-line-len") << 2;
+	if (!ci->dcache_line_length) {
 		if (fcpu(cpu, "xlnx,dcache-use-fsl"))
-			ci->dcache_line = 4 << 2;
+			ci->dcache_line_length = 4 << 2;
 		else
-			ci->dcache_line = 1 << 2;
+			ci->dcache_line_length = 1 << 2;
 	}
 	ci->dcache_size = fcpu(cpu, "d-cache-size");
 	ci->dcache_base = fcpu(cpu, "d-cache-baseaddr");
-- 
cgit v1.2.3


From e051af576a414b6fcfe6589e99b2357522718050 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Wed, 14 Oct 2009 11:12:50 +0200
Subject: microblaze: Extend cpuinfo for support write-back caches

There is missing checking agains PVR but this is not important
for now. There are some missing checking too.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/cpuinfo.h       | 1 +
 arch/microblaze/kernel/cpu/cpuinfo-static.c | 1 +
 arch/microblaze/kernel/cpu/mb.c             | 8 ++++++--
 3 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/microblaze/include/asm/cpuinfo.h b/arch/microblaze/include/asm/cpuinfo.h
index aadf7a899d49..b4f5ca33aebf 100644
--- a/arch/microblaze/include/asm/cpuinfo.h
+++ b/arch/microblaze/include/asm/cpuinfo.h
@@ -53,6 +53,7 @@ struct cpuinfo {
 	u32 dcache_write;
 	u32 dcache_line_length;
 	u32 dcache_size;
+	u32 dcache_wb;
 	unsigned long dcache_base;
 	unsigned long dcache_high;
 
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c
index 6558429eb973..6095aa6b5c88 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-static.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c
@@ -96,6 +96,7 @@ void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
 	ci->dcache_size = fcpu(cpu, "d-cache-size");
 	ci->dcache_base = fcpu(cpu, "d-cache-baseaddr");
 	ci->dcache_high = fcpu(cpu, "d-cache-highaddr");
+	ci->dcache_wb = fcpu(cpu, "xlnx,dcache-use-writeback");
 
 	ci->use_dopb = fcpu(cpu, "xlnx,d-opb");
 	ci->use_iopb = fcpu(cpu, "xlnx,i-opb");
diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c
index 4dcfccdbc364..0c912b2a8e03 100644
--- a/arch/microblaze/kernel/cpu/mb.c
+++ b/arch/microblaze/kernel/cpu/mb.c
@@ -103,11 +103,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	else
 		count += seq_printf(m, "Icache:\t\tno\n");
 
-	if (cpuinfo.use_dcache)
+	if (cpuinfo.use_dcache) {
 		count += seq_printf(m,
 				"Dcache:\t\t%ukB\n",
 				cpuinfo.dcache_size >> 10);
-	else
+		if (cpuinfo.dcache_wb)
+			count += seq_printf(m, "\t\twrite-back\n");
+		else
+			count += seq_printf(m, "\t\twrite-through\n");
+	} else
 		count += seq_printf(m, "Dcache:\t\tno\n");
 
 	count += seq_printf(m,
-- 
cgit v1.2.3


From a01523cdcd2439b553086127be3d30ac9c3cb651 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 15 Oct 2009 11:32:25 +0200
Subject: microblaze: Ptrace notifying from signal code

After the signal frame is set up on the userspace stack, ptrace() should
be given an opportunity to single-step into the signal handler

FRV, Blackfin, mn10300 and UM. Worth to look at that patches.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/signal.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 1c80e4fc40ce..0c96ac34c316 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -233,6 +233,10 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 
 	set_fs(USER_DS);
 
+	/* the tracer may want to single-step inside the handler */
+	if (test_thread_flag(TIF_SINGLESTEP))
+		ptrace_notify(SIGTRAP);
+
 #ifdef DEBUG_SIG
 	printk(KERN_INFO "SIG deliver (%s:%d): sp=%p pc=%08lx\n",
 		current->comm, current->pid, frame, regs->pc);
-- 
cgit v1.2.3


From 6a8dfe1cac5c591aecf88b38b8f4b206ee636761 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Wed, 14 Oct 2009 17:38:26 +0200
Subject: microblaze: support U-BOOT image format

Two version are generated.
linux.bin.ub which is created from linux.bin file
and
simpleImage.<dts>.ub which is created from stripped simpleImage.<dts> file

Load address and entry point is for microblaze first instruction
which is CONFIG_KERNEL_BASE_ADDR variable.

There is possible for simpleImage format parse _start symbol too.

simpleImage.<dts> is still stripped elf file

I cleared simpleImage.<dts>.unstrip file because there are so big.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/boot/Makefile | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
index 21f13322a4ca..902cf9846c3c 100644
--- a/arch/microblaze/boot/Makefile
+++ b/arch/microblaze/boot/Makefile
@@ -2,11 +2,13 @@
 # arch/microblaze/boot/Makefile
 #
 
+MKIMAGE := $(srctree)/scripts/mkuboot.sh
+
 obj-y += linked_dtb.o
 
 targets := linux.bin linux.bin.gz simpleImage.%
 
-OBJCOPYFLAGS_linux.bin  := -O binary
+OBJCOPYFLAGS := -O binary
 
 # Where the DTS files live
 dtstree         := $(srctree)/$(src)/dts
@@ -24,6 +26,7 @@ $(obj)/linux.bin: vmlinux FORCE
 	[ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \
 	touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image"
 	$(call if_changed,objcopy)
+	$(call if_changed,uimage)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 
 $(obj)/linux.bin.gz: $(obj)/linux.bin FORCE
@@ -36,8 +39,16 @@ quiet_cmd_cp = CP      $< $@$2
 quiet_cmd_strip = STRIP   $@
       cmd_strip = $(STRIP) -K _start -K _end -K __log_buf -K _fdt_start vmlinux -o $@
 
+quiet_cmd_uimage = UIMAGE  $@.ub
+      cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A microblaze -O linux -T kernel \
+                   -C none -n 'Linux-$(KERNELRELEASE)' \
+                   -a $(CONFIG_KERNEL_BASE_ADDR) -e $(CONFIG_KERNEL_BASE_ADDR) \
+                   -d $@ $@.ub
+
 $(obj)/simpleImage.%: vmlinux FORCE
 	$(call if_changed,cp,.unstrip)
+	$(call if_changed,objcopy)
+	$(call if_changed,uimage)
 	$(call if_changed,strip)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 
@@ -53,4 +64,4 @@ $(obj)/%.dtb: $(dtstree)/%.dts FORCE
 
 clean-kernel += linux.bin linux.bin.gz simpleImage.*
 
-clean-files += *.dtb
+clean-files += *.dtb simpleImage.*.unstrip
-- 
cgit v1.2.3


From a1f55113ca2130f775eeebe799a401619bfd0295 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 15 Oct 2009 15:18:13 +0200
Subject: microblaze: Move cache macro from cache.h to cacheflush.h

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/cache.h      | 16 ----------------
 arch/microblaze/include/asm/cacheflush.h | 17 +++++++++++++++++
 arch/microblaze/kernel/process.c         |  1 +
 3 files changed, 18 insertions(+), 16 deletions(-)

diff --git a/arch/microblaze/include/asm/cache.h b/arch/microblaze/include/asm/cache.h
index c209c47509d5..e52210891d78 100644
--- a/arch/microblaze/include/asm/cache.h
+++ b/arch/microblaze/include/asm/cache.h
@@ -21,20 +21,4 @@
 
 #define SMP_CACHE_BYTES	L1_CACHE_BYTES
 
-void _enable_icache(void);
-void _disable_icache(void);
-void _invalidate_icache(unsigned int addr);
-
-#define __enable_icache()		_enable_icache()
-#define __disable_icache()		_disable_icache()
-#define __invalidate_icache(addr)	_invalidate_icache(addr)
-
-void _enable_dcache(void);
-void _disable_dcache(void);
-void _invalidate_dcache(unsigned int addr);
-
-#define __enable_dcache()		_enable_dcache()
-#define __disable_dcache()		_disable_dcache()
-#define __invalidate_dcache(addr)	_invalidate_dcache(addr)
-
 #endif /* _ASM_MICROBLAZE_CACHE_H */
diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h
index 088076e657b3..1f04b9111454 100644
--- a/arch/microblaze/include/asm/cacheflush.h
+++ b/arch/microblaze/include/asm/cacheflush.h
@@ -65,6 +65,23 @@
 #define flush_cache_vmap(start, end)		do { } while (0)
 #define flush_cache_vunmap(start, end)		do { } while (0)
 
+
+void _enable_icache(void);
+void _disable_icache(void);
+void _invalidate_icache(unsigned int addr);
+
+#define __enable_icache()		_enable_icache()
+#define __disable_icache()		_disable_icache()
+#define __invalidate_icache(addr)	_invalidate_icache(addr)
+
+void _enable_dcache(void);
+void _disable_dcache(void);
+void _invalidate_dcache(unsigned int addr);
+
+#define __enable_dcache()		_enable_dcache()
+#define __disable_dcache()		_disable_dcache()
+#define __invalidate_dcache(addr)	_invalidate_dcache(addr)
+
 struct page;
 struct mm_struct;
 struct vm_area_struct;
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index c592d475b3d8..812f1bf06c9e 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -15,6 +15,7 @@
 #include <linux/bitops.h>
 #include <asm/system.h>
 #include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
 
 void show_regs(struct pt_regs *regs)
 {
-- 
cgit v1.2.3


From 3e78e4e5eaf6a85b8cdcc880bb46c1e4b4b79cc2 Mon Sep 17 00:00:00 2001
From: John Williams <john.williams@petalogix.com>
Date: Mon, 24 Aug 2009 13:52:32 +1000
Subject: microblaze: Remove the buggy ALLOW_EDIT_AUTO config option

This was intended to allow manual override of CPU settings copied automatically
to Kconfig.auto, however it's problematic for several reasons, but mostly:

  * If the defconfig doesn't have ALLOW_EDIT_AUTO=y, then it's impossible for
    that defconfig to iverride the values in the kernel source tree.  This leads
    to very strange errors where the kernel is compiled with the wrong CPUFLAGS.

Next patch in the series will back out the default in Kconfig.auto to baseline
settings, so a kernel built with no default values will at least boot on any
hardware, just not make use of additional CPU features.

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/platform/Kconfig.platform     | 19 -------------------
 arch/microblaze/platform/generic/Kconfig.auto | 17 ++++++++---------
 2 files changed, 8 insertions(+), 28 deletions(-)

diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/platform/Kconfig.platform
index 8e9b4752d3ff..28e418a3c0b4 100644
--- a/arch/microblaze/platform/Kconfig.platform
+++ b/arch/microblaze/platform/Kconfig.platform
@@ -59,25 +59,6 @@ config OPT_LIB_ASM
 	  Allows turn on optimalized library function (memcpy and memmove).
 	  Function are written in asm code.
 
-# This is still a bit broken - disabling for now JW 20070504
-config ALLOW_EDIT_AUTO
-	bool "Permit Display/edit of Kconfig.auto platform settings"
-	default n
-	help
-	  Allows the editing of auto-generated platform settings from
-	  the Kconfig.auto file. Obviously this does not change the
-	  underlying hardware, so be very careful if you go editing
-	  these settings.
-
-	  Also, if you enable this, and edit various Kconfig.auto
-	  settings, YOUR CHANGES WILL BE LOST if you then disable it
-	  again. You have been warned!
-
-	  If unsure, say no.
-
-comment "Automatic platform settings from Kconfig.auto"
-	depends on ALLOW_EDIT_AUTO
-
 if PLATFORM_GENERIC=y
 	source "arch/microblaze/platform/generic/Kconfig.auto"
 endif
diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto
index fbca22d9c8b9..1eaa49ea8f2d 100644
--- a/arch/microblaze/platform/generic/Kconfig.auto
+++ b/arch/microblaze/platform/generic/Kconfig.auto
@@ -21,7 +21,6 @@
 
 # Definitions for MICROBLAZE0
 comment "Definitions for MICROBLAZE0"
-	depends on ALLOW_EDIT_AUTO
 
 config KERNEL_BASE_ADDR
 	hex "Physical address where Linux Kernel is"
@@ -30,33 +29,33 @@ config KERNEL_BASE_ADDR
 	  BASE Address for kernel
 
 config XILINX_MICROBLAZE0_FAMILY
-	string "Targetted FPGA family" if ALLOW_EDIT_AUTO
+	string "Targetted FPGA family"
 	default "virtex5"
 
 config XILINX_MICROBLAZE0_USE_MSR_INSTR
-	int "USE_MSR_INSTR range (0:1)" if ALLOW_EDIT_AUTO
+	int "USE_MSR_INSTR range (0:1)"
 	default 1
 
 config XILINX_MICROBLAZE0_USE_PCMP_INSTR
-	int "USE_PCMP_INSTR range (0:1)" if ALLOW_EDIT_AUTO
+	int "USE_PCMP_INSTR range (0:1)"
 	default 1
 
 config XILINX_MICROBLAZE0_USE_BARREL
-	int "USE_BARREL range (0:1)" if ALLOW_EDIT_AUTO
+	int "USE_BARREL range (0:1)"
 	default 1
 
 config XILINX_MICROBLAZE0_USE_DIV
-	int "USE_DIV range (0:1)" if ALLOW_EDIT_AUTO
+	int "USE_DIV range (0:1)"
 	default 1
 
 config XILINX_MICROBLAZE0_USE_HW_MUL
-	int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)" if ALLOW_EDIT_AUTO
+	int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
 	default 2
 
 config XILINX_MICROBLAZE0_USE_FPU
-	int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)" if ALLOW_EDIT_AUTO
+	int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
 	default 2
 
 config XILINX_MICROBLAZE0_HW_VER
-	string "Core version number" if ALLOW_EDIT_AUTO
+	string "Core version number"
 	default 7.10.d
-- 
cgit v1.2.3


From 27d2a3ee5e9874e400b59d802405b58b65a8a723 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 26 Oct 2009 09:56:48 +0100
Subject: microblaze: Enable asm optimization only for HW with barrel-shifter

Asm code uses barrel-shifter instruction that's why we have
to protect cases when HW don't have it.

Reported-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/platform/Kconfig.platform | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/platform/Kconfig.platform
index 28e418a3c0b4..669c7eec293e 100644
--- a/arch/microblaze/platform/Kconfig.platform
+++ b/arch/microblaze/platform/Kconfig.platform
@@ -53,7 +53,7 @@ config OPT_LIB_FUNCTION
 
 config OPT_LIB_ASM
 	bool "Optimalized lib function ASM"
-	depends on OPT_LIB_FUNCTION
+	depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1)
 	default n
 	help
 	  Allows turn on optimalized library function (memcpy and memmove).
-- 
cgit v1.2.3


From f99ec58b6aec8c85e8b3e7224cc8b602723ba294 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Fri, 21 Aug 2009 13:47:09 +0200
Subject: microblaze: Update default generic DTS

It is generated with longer compatible list

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/platform/generic/system.dts | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/microblaze/platform/generic/system.dts b/arch/microblaze/platform/generic/system.dts
index e00da8971c36..2d5c41767cd0 100644
--- a/arch/microblaze/platform/generic/system.dts
+++ b/arch/microblaze/platform/generic/system.dts
@@ -38,6 +38,10 @@
 		device_type = "memory";
 		reg = < 0x90000000 0x10000000 >;
 	} ;
+	aliases {
+		ethernet0 = &Hard_Ethernet_MAC;
+		serial0 = &RS232_Uart_1;
+	} ;
 	chosen {
 		bootargs = "console=ttyUL0,115200 highres=on";
 		linux,stdout-path = "/plb@0/serial@84000000";
@@ -128,7 +132,7 @@
 	mb_plb: plb@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
+		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
 		ranges ;
 		FLASH: flash@a0000000 {
 			bank-width = <2>;
@@ -215,12 +219,12 @@
 			#size-cells = <1>;
 			compatible = "xlnx,compound";
 			ethernet@81c00000 {
-				compatible = "xlnx,xps-ll-temac-1.01.b";
+				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
 				device_type = "network";
 				interrupt-parent = <&xps_intc_0>;
 				interrupts = < 5 2 >;
 				llink-connected = <&PIM3>;
-				local-mac-address = [ 02 00 00 00 00 00 ];
+				local-mac-address = [ 00 0a 35 00 00 00 ];
 				reg = < 0x81c00000 0x40 >;
 				xlnx,bus2core-clk-ratio = <0x1>;
 				xlnx,phy-type = <0x1>;
-- 
cgit v1.2.3


From 4a7b40c9b8fa5e3e3f907b6e46602448856dc6a9 Mon Sep 17 00:00:00 2001
From: John Williams <john.williams@petalogix.com>
Date: Mon, 24 Aug 2009 13:52:33 +1000
Subject: microblaze: Use lowest-common-denominator default CPU settings

This will ensure that kernels built with no custom CPU settings will still boot
OK on hardware that has additional CPU hardware instructions etc.

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/platform/generic/Kconfig.auto | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto
index 1eaa49ea8f2d..5d86fc19029d 100644
--- a/arch/microblaze/platform/generic/Kconfig.auto
+++ b/arch/microblaze/platform/generic/Kconfig.auto
@@ -34,27 +34,27 @@ config XILINX_MICROBLAZE0_FAMILY
 
 config XILINX_MICROBLAZE0_USE_MSR_INSTR
 	int "USE_MSR_INSTR range (0:1)"
-	default 1
+	default 0
 
 config XILINX_MICROBLAZE0_USE_PCMP_INSTR
 	int "USE_PCMP_INSTR range (0:1)"
-	default 1
+	default 0
 
 config XILINX_MICROBLAZE0_USE_BARREL
 	int "USE_BARREL range (0:1)"
-	default 1
+	default 0
 
 config XILINX_MICROBLAZE0_USE_DIV
 	int "USE_DIV range (0:1)"
-	default 1
+	default 0
 
 config XILINX_MICROBLAZE0_USE_HW_MUL
 	int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
-	default 2
+	default 0
 
 config XILINX_MICROBLAZE0_USE_FPU
 	int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
-	default 2
+	default 0
 
 config XILINX_MICROBLAZE0_HW_VER
 	string "Core version number"
-- 
cgit v1.2.3


From fd6ed51f4f9c01b5cea4a8be50bf49b0ae2fbd51 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 23 Jul 2009 08:23:53 +0200
Subject: microblaze: Export memory_start for modules

memory_start symbol is needed by kernel modules.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/mm/init.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index a44892e7cd5b..a57cedf36715 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -41,6 +41,7 @@ char *klimit = _end;
  * have available.
  */
 unsigned long memory_start;
+EXPORT_SYMBOL(memory_start);
 unsigned long memory_end; /* due to mm/nommu.c */
 unsigned long memory_size;
 
-- 
cgit v1.2.3


From 95dfbbe4700016bddd7e8915e95a97652e70f495 Mon Sep 17 00:00:00 2001
From: John Williams <john.williams@petalogix.com>
Date: Fri, 14 Aug 2009 12:06:46 +1000
Subject: microblaze: Simple __copy_tofrom_user for noMMU

This is first patch which clear part of uaccess.h.
uaccess.h will be clear later.

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/uaccess.h | 12 ++++++------
 arch/microblaze/lib/uaccess.c         |  7 +++++++
 2 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 5431b4631a7a..371bd6e56d9a 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -272,8 +272,9 @@ static inline int clear_user(char *to, int size)
 	return size;
 }
 
-extern unsigned long __copy_tofrom_user(void __user *to,
-		const void __user *from, unsigned long size);
+#define __copy_from_user(to, from, n)	copy_from_user((to), (from), (n))
+#define __copy_from_user_inatomic(to, from, n) \
+		copy_from_user((to), (from), (n))
 
 #define copy_to_user(to, from, n)					\
 	(access_ok(VERIFY_WRITE, (to), (n)) ?				\
@@ -290,10 +291,6 @@ extern unsigned long __copy_tofrom_user(void __user *to,
 			(void __user *)(from), (n))			\
 		: -EFAULT)
 
-#define __copy_from_user(to, from, n)	copy_from_user((to), (from), (n))
-#define __copy_from_user_inatomic(to, from, n) \
-		copy_from_user((to), (from), (n))
-
 extern int __strncpy_user(char *to, const char __user *from, int len);
 extern int __strnlen_user(const char __user *sstr, int len);
 
@@ -305,6 +302,9 @@ extern int __strnlen_user(const char __user *sstr, int len);
 
 #endif /* CONFIG_MMU */
 
+extern unsigned long __copy_tofrom_user(void __user *to,
+		const void __user *from, unsigned long size);
+
 /*
  * The exception table consists of pairs of addresses: the first is the
  * address of an instruction that is allowed to fault, and the second is
diff --git a/arch/microblaze/lib/uaccess.c b/arch/microblaze/lib/uaccess.c
index 8eb9df5a26c9..a853fe089c44 100644
--- a/arch/microblaze/lib/uaccess.c
+++ b/arch/microblaze/lib/uaccess.c
@@ -39,3 +39,10 @@ long strncpy_from_user(char *dst, const char __user *src, long count)
 		__do_strncpy_from_user(dst, src, count, res);
 	return res;
 }
+
+unsigned long __copy_tofrom_user(void __user *to,
+		const void __user *from, unsigned long size)
+{
+	memcpy(to, from, size);
+	return 0;
+}
-- 
cgit v1.2.3


From 6d858535be59b220c0f8dc335e030c2e3f3a3032 Mon Sep 17 00:00:00 2001
From: John Linn <john.linn@xilinx.com>
Date: Fri, 5 Jun 2009 11:36:31 -0600
Subject: microblaze: Fix the heartbeat gpio to be more robust

The device tree handling for the gpio in the heart beat was not handling
the system when there was no gpio and it wasn't working with a newer version
of the gpio core which does not have the is-bidir property.

Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/heartbeat.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/microblaze/kernel/heartbeat.c b/arch/microblaze/kernel/heartbeat.c
index 1bdf20222b92..522751737cfa 100644
--- a/arch/microblaze/kernel/heartbeat.c
+++ b/arch/microblaze/kernel/heartbeat.c
@@ -45,6 +45,7 @@ void heartbeat(void)
 void setup_heartbeat(void)
 {
 	struct device_node *gpio = NULL;
+	int *prop;
 	int j;
 	char *gpio_list[] = {
 				"xlnx,xps-gpio-1.00.a",
@@ -58,10 +59,14 @@ void setup_heartbeat(void)
 			break;
 	}
 
-	base_addr = *(int *) of_get_property(gpio, "reg", NULL);
-	base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE);
-	printk(KERN_NOTICE "Heartbeat GPIO at 0x%x\n", base_addr);
+	if (gpio) {
+		base_addr = *(int *) of_get_property(gpio, "reg", NULL);
+		base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE);
+		printk(KERN_NOTICE "Heartbeat GPIO at 0x%x\n", base_addr);
 
-	if (*(int *) of_get_property(gpio, "xlnx,is-bidir", NULL))
-		out_be32(base_addr + 4, 0); /* GPIO is configured as output */
+		/* GPIO is configured as output */
+		prop = (int *) of_get_property(gpio, "xlnx,is-bidir", NULL);
+		if (prop)
+			out_be32(base_addr + 4, 0);
+	}
 }
-- 
cgit v1.2.3


From d68bf9705ad490ad86b0b1be9a2b91a363d6eccc Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 23 Nov 2009 10:07:51 +0100
Subject: microblaze: Adding dev_arch_data functions

The functions, dev_arch_data_set_node and get_node are missing
and are needed by some device drivers such as I2C.

Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/device.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/microblaze/include/asm/device.h b/arch/microblaze/include/asm/device.h
index 30286db27c1c..78a038452c0f 100644
--- a/arch/microblaze/include/asm/device.h
+++ b/arch/microblaze/include/asm/device.h
@@ -19,6 +19,18 @@ struct dev_archdata {
 struct pdev_archdata {
 };
 
+static inline void dev_archdata_set_node(struct dev_archdata *ad,
+					 struct device_node *np)
+{
+	ad->of_node = np;
+}
+
+static inline struct device_node *
+dev_archdata_get_node(const struct dev_archdata *ad)
+{
+	return ad->of_node;
+}
+
 #endif /* _ASM_MICROBLAZE_DEVICE_H */
 
 
-- 
cgit v1.2.3


From fd3db0a675a35f28b08e47e8ed1a7a7f158467c2 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 19 Oct 2009 11:58:44 +0200
Subject: microblaze: Futex support

Microblaze v7.20 provides new lwx, swx instructions which bring
possibility to implement lock rutines.

There are some tests in open posix thread LTP part but current
toolchain not support it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/futex.h | 127 +++++++++++++++++++++++++++++++++++-
 1 file changed, 126 insertions(+), 1 deletion(-)

diff --git a/arch/microblaze/include/asm/futex.h b/arch/microblaze/include/asm/futex.h
index 0b745828f42b..8dbb6e7a03a2 100644
--- a/arch/microblaze/include/asm/futex.h
+++ b/arch/microblaze/include/asm/futex.h
@@ -1 +1,126 @@
-#include <asm-generic/futex.h>
+#ifndef _ASM_MICROBLAZE_FUTEX_H
+#define _ASM_MICROBLAZE_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+({									\
+	__asm__ __volatile__ (						\
+			"1:	lwx	%0, %2, r0; "			\
+				insn					\
+			"2:	swx	%1, %2, r0;			\
+				addic	%1, r0, 0;			\
+				bnei	%1, 1b;				\
+			3:						\
+			.section .fixup,\"ax\";				\
+			4:	brid	3b;				\
+				addik	%1, r0, %3;			\
+			.previous;					\
+			.section __ex_table,\"a\";			\
+			.word	1b,4b,2b,4b;				\
+			.previous;"					\
+	: "=&r" (oldval), "=&r" (ret)					\
+	: "b" (uaddr), "i" (-EFAULT), "r" (oparg)			\
+	);								\
+})
+
+static inline int
+futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("or %1,%4,%4;", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("add %1,%0,%4;", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("or %1,%0,%4;", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("and %1,%0,%4;", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("xor %1,%0,%4;", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ:
+			ret = (oldval == cmparg);
+			break;
+		case FUTEX_OP_CMP_NE:
+			ret = (oldval != cmparg);
+			break;
+		case FUTEX_OP_CMP_LT:
+			ret = (oldval < cmparg);
+			break;
+		case FUTEX_OP_CMP_GE:
+			ret = (oldval >= cmparg);
+			break;
+		case FUTEX_OP_CMP_LE:
+			ret = (oldval <= cmparg);
+			break;
+		case FUTEX_OP_CMP_GT:
+			ret = (oldval > cmparg);
+			break;
+		default:
+			ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	int prev, cmp;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	__asm__ __volatile__ ("1:	lwx	%0, %2, r0;		\
+					cmp	%1, %0, %3;		\
+					beqi	%1, 3f;			\
+				2:	swx	%4, %2, r0;		\
+					addic	%1, r0, 0;		\
+					bnei	%1, 1b;			\
+				3:					\
+				.section .fixup,\"ax\";			\
+				4:	brid	3b;			\
+					addik	%0, r0, %5;		\
+				.previous;				\
+				.section __ex_table,\"a\";		\
+				.word	1b,4b,2b,4b;			\
+				.previous;"				\
+		: "=&r" (prev), "=&r"(cmp)				\
+		: "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT));
+
+	return prev;
+}
+
+#endif /* __KERNEL__ */
+
+#endif
-- 
cgit v1.2.3


From d4f182700bb1279ae7e76a59b9be39efa5f23bfe Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 23 Nov 2009 10:15:00 +0100
Subject: microblaze: Remove duplicity from pgalloc.h

just file cleanup

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/pgalloc.h | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
index b0131da1387b..7547f5064560 100644
--- a/arch/microblaze/include/asm/pgalloc.h
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -106,9 +106,6 @@ extern inline void free_pgd_slow(pgd_t *pgd)
  */
 #define pmd_alloc_one_fast(mm, address)	({ BUG(); ((pmd_t *)1); })
 #define pmd_alloc_one(mm, address)	({ BUG(); ((pmd_t *)2); })
-/* FIXME two definition - look below */
-#define pmd_free(mm, x)			do { } while (0)
-#define pgd_populate(mm, pmd, pte)	BUG()
 
 static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
 		unsigned long address)
@@ -192,14 +189,14 @@ extern inline void pte_free(struct mm_struct *mm, struct page *ptepage)
  * the pgd will always be present..
  */
 #define pmd_alloc_one(mm, address)	({ BUG(); ((pmd_t *)2); })
-/*#define pmd_free(mm, x)			do { } while (0)*/
-#define __pmd_free_tlb(tlb, x, addr)	do { } while (0)
+#define pmd_free(mm, x)			do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr)	pmd_free((tlb)->mm, x)
 #define pgd_populate(mm, pmd, pte)	BUG()
 
 extern int do_check_pgt_cache(int, int);
 
 #endif /* CONFIG_MMU */
 
-#define check_pgt_cache()	do {} while (0)
+#define check_pgt_cache()		do { } while (0)
 
 #endif /* _ASM_MICROBLAZE_PGALLOC_H */
-- 
cgit v1.2.3


From f6e1f1b4809b6a63e22f82358ba2e750c7e1c1a2 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Wed, 21 Oct 2009 12:29:46 +0200
Subject: microblaze: Checking DTS against PVR for write-back cache

WB cache has special flag in PVR. There is added checking mechanism
for PVR and DTS.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/pvr.h             | 30 ++++++++++++++++-----------
 arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c | 11 ++++++++++
 2 files changed, 29 insertions(+), 12 deletions(-)

diff --git a/arch/microblaze/include/asm/pvr.h b/arch/microblaze/include/asm/pvr.h
index 66f1b30dd097..e38abc7714b6 100644
--- a/arch/microblaze/include/asm/pvr.h
+++ b/arch/microblaze/include/asm/pvr.h
@@ -76,20 +76,23 @@ struct pvr_s {
 #define PVR3_FSL_LINKS_MASK		0x00000380
 
 /* ICache config PVR masks */
-#define PVR4_USE_ICACHE_MASK		0x80000000
-#define PVR4_ICACHE_ADDR_TAG_BITS_MASK	0x7C000000
-#define PVR4_ICACHE_USE_FSL_MASK	0x02000000
-#define PVR4_ICACHE_ALLOW_WR_MASK	0x01000000
-#define PVR4_ICACHE_LINE_LEN_MASK	0x00E00000
-#define PVR4_ICACHE_BYTE_SIZE_MASK	0x001F0000
+#define PVR4_USE_ICACHE_MASK		0x80000000 /* ICU */
+#define PVR4_ICACHE_ADDR_TAG_BITS_MASK	0x7C000000 /* ICTS */
+#define PVR4_ICACHE_ALLOW_WR_MASK	0x01000000 /* ICW */
+#define PVR4_ICACHE_LINE_LEN_MASK	0x00E00000 /* ICLL */
+#define PVR4_ICACHE_BYTE_SIZE_MASK	0x001F0000 /* ICBS */
+#define PVR4_ICACHE_ALWAYS_USED		0x00008000 /* IAU */
+#define PVR4_ICACHE_INTERFACE		0x00002000 /* ICI */
 
 /* DCache config PVR masks */
-#define PVR5_USE_DCACHE_MASK		0x80000000
-#define PVR5_DCACHE_ADDR_TAG_BITS_MASK	0x7C000000
-#define PVR5_DCACHE_USE_FSL_MASK	0x02000000
-#define PVR5_DCACHE_ALLOW_WR_MASK	0x01000000
-#define PVR5_DCACHE_LINE_LEN_MASK	0x00E00000
-#define PVR5_DCACHE_BYTE_SIZE_MASK	0x001F0000
+#define PVR5_USE_DCACHE_MASK		0x80000000 /* DCU */
+#define PVR5_DCACHE_ADDR_TAG_BITS_MASK	0x7C000000 /* DCTS */
+#define PVR5_DCACHE_ALLOW_WR_MASK	0x01000000 /* DCW */
+#define PVR5_DCACHE_LINE_LEN_MASK	0x00E00000 /* DCLL */
+#define PVR5_DCACHE_BYTE_SIZE_MASK	0x001F0000 /* DCBS */
+#define PVR5_DCACHE_ALWAYS_USED		0x00008000 /* DAU */
+#define PVR5_DCACHE_USE_WRITEBACK	0x00004000 /* DWB */
+#define PVR5_DCACHE_INTERFACE		0x00002000 /* DCI */
 
 /* ICache base address PVR mask */
 #define PVR6_ICACHE_BASEADDR_MASK	0xFFFFFFFF
@@ -178,11 +181,14 @@ struct pvr_s {
 			((pvr.pvr[5] & PVR5_DCACHE_ADDR_TAG_BITS_MASK) >> 26)
 #define PVR_DCACHE_USE_FSL(pvr)		(pvr.pvr[5] & PVR5_DCACHE_USE_FSL_MASK)
 #define PVR_DCACHE_ALLOW_WR(pvr)	(pvr.pvr[5] & PVR5_DCACHE_ALLOW_WR_MASK)
+/* FIXME two shifts on one line needs any comment */
 #define PVR_DCACHE_LINE_LEN(pvr) \
 			(1 << ((pvr.pvr[5] & PVR5_DCACHE_LINE_LEN_MASK) >> 21))
 #define PVR_DCACHE_BYTE_SIZE(pvr) \
 			(1 << ((pvr.pvr[5] & PVR5_DCACHE_BYTE_SIZE_MASK) >> 16))
 
+#define PVR_DCACHE_USE_WRITEBACK(pvr) \
+			((pvr.pvr[5] & PVR5_DCACHE_USE_WRITEBACK) >> 14)
 
 #define PVR_ICACHE_BASEADDR(pvr)	(pvr.pvr[6] & PVR6_ICACHE_BASEADDR_MASK)
 #define PVR_ICACHE_HIGHADDR(pvr)	(pvr.pvr[7] & PVR7_ICACHE_HIGHADDR_MASK)
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
index c5acf2b56eed..f72dbd66c844 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
@@ -21,8 +21,14 @@
  */
 
 #define CI(c, p) { ci->c = PVR_##p(pvr); }
+
+#if defined(CONFIG_EARLY_PRINTK) && defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
 #define err_printk(x) \
 	early_printk("ERROR: Microblaze " x "-different for PVR and DTS\n");
+#else
+#define err_printk(x) \
+	printk(KERN_INFO "ERROR: Microblaze " x "-different for PVR and DTS\n");
+#endif
 
 void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
 {
@@ -83,6 +89,11 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
 	CI(dcache_base, DCACHE_BASEADDR);
 	CI(dcache_high, DCACHE_HIGHADDR);
 
+	temp = PVR_DCACHE_USE_WRITEBACK(pvr);
+	if (ci->dcache_wb != temp)
+		err_printk("DCACHE WB");
+	ci->dcache_wb = temp;
+
 	CI(use_dopb, D_OPB);
 	CI(use_iopb, I_OPB);
 	CI(use_dlmb, D_LMB);
-- 
cgit v1.2.3


From 833d0d8da41b80e5f7c3b34cb187b12c33ef66c8 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 19 Oct 2009 13:50:02 +0200
Subject: microblaze: Enable futimesat syscall

Futimesat was disabled. LTP testing shows that MB has no
problem with this syscall.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/syscall_table.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index b96f365ea6b1..4e666d9c1261 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -303,7 +303,7 @@ ENTRY(sys_call_table)
 	.long sys_mkdirat
 	.long sys_mknodat
 	.long sys_fchownat
-	.long sys_ni_syscall
+	.long sys_futimesat
 	.long sys_fstatat64		/* 300 */
 	.long sys_unlinkat
 	.long sys_renameat
-- 
cgit v1.2.3


From 33d9ff5985ff015cbaaef85285d19fe580487cf3 Mon Sep 17 00:00:00 2001
From: "steve@digidescorp.com" <steve@digidescorp.com>
Date: Tue, 17 Nov 2009 08:43:39 -0600
Subject: microblaze: Fix level interrupt ACKing

Level interrupts need to be ack'd in the unmask handler, as in powerpc.
Among other issues, this bug causes the system clock to appear to run at
double-speed.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/intc.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index 6eea6f92b84e..03172c1da770 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -42,8 +42,16 @@ unsigned int nr_irq;
 
 static void intc_enable_or_unmask(unsigned int irq)
 {
+	unsigned long mask = 1 << irq;
 	pr_debug("enable_or_unmask: %d\n", irq);
-	out_be32(INTC_BASE + SIE, 1 << irq);
+	out_be32(INTC_BASE + SIE, mask);
+
+	/* ack level irqs because they can't be acked during
+	 * ack function since the handle_level_irq function
+	 * acks the irq before calling the interrupt handler
+	 */
+	if (irq_desc[irq].status & IRQ_LEVEL)
+		out_be32(INTC_BASE + IAR, mask);
 }
 
 static void intc_disable_or_mask(unsigned int irq)
-- 
cgit v1.2.3


From 3540ce8238c2d29a2a20a1876575c0064d0da23e Mon Sep 17 00:00:00 2001
From: John Williams <john.williams@petalogix.com>
Date: Tue, 24 Nov 2009 20:27:54 +1000
Subject: microblaze: Core oprofile configs and hooks

Microblaze uses timer interrupt mode. Microblaze don't have
any performance counter that's why we use just simple implementation.

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Kconfig                        |  2 ++
 arch/microblaze/Makefile                       |  2 ++
 arch/microblaze/oprofile/Makefile              | 13 +++++++++++++
 arch/microblaze/oprofile/microblaze_oprofile.c | 22 ++++++++++++++++++++++
 4 files changed, 39 insertions(+)
 create mode 100644 arch/microblaze/oprofile/Makefile
 create mode 100644 arch/microblaze/oprofile/microblaze_oprofile.c

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index e297802b8321..165cf06b9b0e 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -13,6 +13,8 @@ config MICROBLAZE
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select USB_ARCH_HAS_EHCI
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select HAVE_OPROFILE
+	select TRACING_SUPPORT
 
 config SWAP
 	def_bool n
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 34187354304a..d2d6cfcb1a30 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -51,6 +51,8 @@ core-y += arch/microblaze/kernel/
 core-y += arch/microblaze/mm/
 core-y += arch/microblaze/platform/
 
+drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/
+
 boot := arch/microblaze/boot
 
 # Are we making a simpleImage.<boardname> target? If so, crack out the boardname
diff --git a/arch/microblaze/oprofile/Makefile b/arch/microblaze/oprofile/Makefile
new file mode 100644
index 000000000000..0d0348c8af97
--- /dev/null
+++ b/arch/microblaze/oprofile/Makefile
@@ -0,0 +1,13 @@
+#
+# arch/microblaze/oprofile/Makefile
+#
+
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
+		oprof.o cpu_buffer.o buffer_sync.o \
+		event_buffer.o oprofile_files.o \
+		oprofilefs.o oprofile_stats.o \
+		timer_int.o )
+
+oprofile-y := $(DRIVER_OBJS) microblaze_oprofile.o
diff --git a/arch/microblaze/oprofile/microblaze_oprofile.c b/arch/microblaze/oprofile/microblaze_oprofile.c
new file mode 100644
index 000000000000..def17e59888e
--- /dev/null
+++ b/arch/microblaze/oprofile/microblaze_oprofile.c
@@ -0,0 +1,22 @@
+/*
+ * Microblaze oprofile code
+ *
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+	return -1;
+}
+
+void oprofile_arch_exit(void)
+{
+}
-- 
cgit v1.2.3


From 3c5e56724d27104f242523d994204a866e05fb54 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 30 Nov 2009 09:26:09 +0100
Subject: microblaze: Enable DTC compilation

For simpleImage format we need to compile DTC. There is still possibility
to compile only Linux kernel without DTB compiled-in.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 165cf06b9b0e..fd53e500be67 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -79,6 +79,9 @@ config PCI
 config NO_DMA
 	def_bool y
 
+config DTC
+	def_bool y
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
-- 
cgit v1.2.3


From 11d5136043424ec6980293210ae774d3ab9646b2 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 7 Dec 2009 08:21:34 +0100
Subject: microblaze: Do not count system calls in default

There is not necessary to count system calls that's why
I added DEBUG macro

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/entry.S | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 7417d9ad0d18..b061d98a3218 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -31,6 +31,8 @@
 #include <linux/errno.h>
 #include <asm/signal.h>
 
+#undef DEBUG
+
 /* The size of a state save frame. */
 #define STATE_SAVE_SIZE		(PT_SIZE + STATE_SAVE_ARG_SPACE)
 
@@ -352,10 +354,12 @@ C_ENTRY(_user_exception):
 	add	r12, r12, r12;			/* convert num -> ptr */
 	add	r12, r12, r12;
 
+#ifdef DEBUG
 	/* Trac syscalls and stored them to r0_ram */
 	lwi	r3, r12, 0x400 + r0_ram
 	addi	r3, r3, 1
 	swi	r3, r12, 0x400 + r0_ram
+#endif
 
 	# Find and jump into the syscall handler.
 	lwi	r12, r12, sys_call_table
-- 
cgit v1.2.3


From 5de23446300a4b2170efd048ae2ec65022650650 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 8 Dec 2009 17:49:21 +0100
Subject: microblaze: Remove panic_timeout init value

panic_timeout is in BSS section and it is cleared with BSS section.
This means that value is setup to 0.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/setup.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index acd70fe30a71..1c3f18ba8af1 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -58,8 +58,6 @@ void __init setup_arch(char **cmdline_p)
 	__invalidate_dcache_all();
 	__enable_dcache();
 
-	panic_timeout = 120;
-
 	setup_memory();
 
 #if defined(CONFIG_SELFMOD_INTC) || defined(CONFIG_SELFMOD_TIMER)
-- 
cgit v1.2.3


From 81ab0dfd9444eabdfd64fb007b0f81cde6b153da Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 8 Dec 2009 17:51:06 +0100
Subject: microblaze: Remove ancient and fake microblaze version from cpu_ver
 table

We need to continue with next microblaze PVR version that's why
I have to remove that ancient version. These version strings not match
any versions. From Microblaze v5.00.a is possible to use this style.
I believe that none use ancients versions. If yes they will be just
labeled as unknown version.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/cpu/cpuinfo.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index a9aa5cf11c39..852ff056ee8f 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -30,11 +30,6 @@ const struct cpu_ver_key cpu_ver_lookup[] = {
 	{"7.20.b", 0x0d},
 	{"7.20.c", 0x0e},
 	{"7.20.d", 0x0f},
-	/* FIXME There is no keycode defined in MBV for these versions */
-	{"2.10.a", 0x10},
-	{"3.00.a", 0x20},
-	{"4.00.a", 0x30},
-	{"4.00.b", 0x40},
 	{NULL, 0},
 };
 
-- 
cgit v1.2.3


From c8983a5c6ecc5ca68a871c44bc35f714663a4dfa Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 8 Dec 2009 17:54:07 +0100
Subject: microblaze: Add PVR for Microblaze v7.30.a

Microblaze v7.30.a will have 0x10 version string.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/cpu/cpuinfo.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index 852ff056ee8f..991d71311b0e 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -30,6 +30,7 @@ const struct cpu_ver_key cpu_ver_lookup[] = {
 	{"7.20.b", 0x0d},
 	{"7.20.c", 0x0e},
 	{"7.20.d", 0x0f},
+	{"7.30.a", 0x10},
 	{NULL, 0},
 };
 
-- 
cgit v1.2.3


From 2ee2ff875a4d3bdb941e2bb1173cd927c09d5a67 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 10 Dec 2009 11:43:57 +0100
Subject: microblaze: Support for WB cache

Microblaze version 7.20.d is the first MB version which can be run
on MMU linux. Please do not used previous version because they contain
HW bug.
Based on WB support was necessary to redesign whole cache design.
Microblaze versions from 7.20.a don't need to disable IRQ and cache
before working with them that's why there are special structures for it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/cacheflush.h | 140 +++----
 arch/microblaze/kernel/cpu/cache.c       | 663 ++++++++++++++++++++++---------
 arch/microblaze/kernel/setup.c           |   9 +-
 arch/microblaze/kernel/signal.c          |  30 +-
 4 files changed, 574 insertions(+), 268 deletions(-)

diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h
index 1f04b9111454..a6edd356cd08 100644
--- a/arch/microblaze/include/asm/cacheflush.h
+++ b/arch/microblaze/include/asm/cacheflush.h
@@ -18,6 +18,8 @@
 /* Somebody depends on this; sigh... */
 #include <linux/mm.h>
 
+/* Look at Documentation/cachetlb.txt */
+
 /*
  * Cache handling functions.
  * Microblaze has a write-through data cache, meaning that the data cache
@@ -27,95 +29,81 @@
  * instruction cache to make sure we don't fetch old, bad code.
  */
 
+/* struct cache, d=dcache, i=icache, fl = flush, iv = invalidate,
+ * suffix r = range */
+struct scache {
+	/* icache */
+	void (*ie)(void); /* enable */
+	void (*id)(void); /* disable */
+	void (*ifl)(void); /* flush */
+	void (*iflr)(unsigned long a, unsigned long b);
+	void (*iin)(void); /* invalidate */
+	void (*iinr)(unsigned long a, unsigned long b);
+	/* dcache */
+	void (*de)(void); /* enable */
+	void (*dd)(void); /* disable */
+	void (*dfl)(void); /* flush */
+	void (*dflr)(unsigned long a, unsigned long b);
+	void (*din)(void); /* invalidate */
+	void (*dinr)(unsigned long a, unsigned long b);
+};
+
+/* microblaze cache */
+extern struct scache *mbc;
+
+void microblaze_cache_init(void);
+
+#define enable_icache()					mbc->ie();
+#define disable_icache()				mbc->id();
+#define flush_icache()					mbc->ifl();
+#define flush_icache_range(start, end)			mbc->iflr(start, end);
+#define invalidate_icache()				mbc->iin();
+#define invalidate_icache_range(start, end)		mbc->iinr(start, end);
+
+
+#define flush_icache_user_range(vma, pg, adr, len)	flush_icache();
+#define flush_icache_page(vma, pg)			do { } while (0)
+
+#define enable_dcache()					mbc->de();
+#define disable_dcache()				mbc->dd();
 /* FIXME for LL-temac driver */
-#define invalidate_dcache_range(start, end) \
-			__invalidate_dcache_range(start, end)
-
-#define flush_cache_all()			__invalidate_cache_all()
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	__invalidate_cache_all()
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define invalidate_dcache()				mbc->din();
+#define invalidate_dcache_range(start, end)		mbc->dinr(start, end);
+#define flush_dcache()					mbc->dfl();
+#define flush_dcache_range(start, end)			mbc->dflr(start, end);
 
-#define flush_dcache_range(start, end)	__invalidate_dcache_range(start, end)
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
+/* D-cache aliasing problem can't happen - cache is between MMU and ram */
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 
-#define flush_icache_range(start, len)	__invalidate_icache_range(start, len)
-#define flush_icache_page(vma, pg)		do { } while (0)
-
-#ifndef CONFIG_MMU
-# define flush_icache_user_range(start, len)	do { } while (0)
-#else
-# define flush_icache_user_range(vma, pg, adr, len) __invalidate_icache_all()
-
-# define flush_page_to_ram(page)		do { } while (0)
 
-# define flush_icache()			__invalidate_icache_all()
-# define flush_cache_sigtramp(vaddr) \
-			__invalidate_icache_range(vaddr, vaddr + 8)
-
-# define flush_dcache_mmap_lock(mapping)	do { } while (0)
-# define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_cache_dup_mm(mm)				do { } while (0)
+#define flush_cache_vmap(start, end)			do { } while (0)
+#define flush_cache_vunmap(start, end)			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
 
-# define flush_cache_dup_mm(mm)			do { } while (0)
+/* MS: kgdb code use this macro, wrong len with FLASH */
+#if 0
+#define flush_cache_range(vma, start, len)	{	\
+	flush_icache_range((unsigned) (start), (unsigned) (start) + (len)); \
+	flush_dcache_range((unsigned) (start), (unsigned) (start) + (len)); \
+}
 #endif
 
-#define flush_cache_vmap(start, end)		do { } while (0)
-#define flush_cache_vunmap(start, end)		do { } while (0)
-
-
-void _enable_icache(void);
-void _disable_icache(void);
-void _invalidate_icache(unsigned int addr);
-
-#define __enable_icache()		_enable_icache()
-#define __disable_icache()		_disable_icache()
-#define __invalidate_icache(addr)	_invalidate_icache(addr)
-
-void _enable_dcache(void);
-void _disable_dcache(void);
-void _invalidate_dcache(unsigned int addr);
-
-#define __enable_dcache()		_enable_dcache()
-#define __disable_dcache()		_disable_dcache()
-#define __invalidate_dcache(addr)	_invalidate_dcache(addr)
-
-struct page;
-struct mm_struct;
-struct vm_area_struct;
-
-/* see arch/microblaze/kernel/cache.c */
-extern void __invalidate_icache_all(void);
-extern void __invalidate_icache_range(unsigned long start, unsigned long end);
-extern void __invalidate_icache_page(struct vm_area_struct *vma,
-				struct page *page);
-extern void __invalidate_icache_user_range(struct vm_area_struct *vma,
-				struct page *page,
-				unsigned long adr, int len);
-extern void __invalidate_cache_sigtramp(unsigned long addr);
-
-extern void __invalidate_dcache_all(void);
-extern void __invalidate_dcache_range(unsigned long start, unsigned long end);
-extern void __invalidate_dcache_page(struct vm_area_struct *vma,
-				struct page *page);
-extern void __invalidate_dcache_user_range(struct vm_area_struct *vma,
-				struct page *page,
-				unsigned long adr, int len);
-
-extern inline void __invalidate_cache_all(void)
-{
-	__invalidate_icache_all();
-	__invalidate_dcache_all();
-}
+#define flush_cache_range(vma, start, len) do { } while (0)
 
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-do { memcpy((dst), (src), (len)); \
-	flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len)); \
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
+do {									\
+	memcpy((dst), (src), (len));					\
+	flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len));	\
 } while (0)
 
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy((dst), (src), (len))
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)		\
+do {									\
+	memcpy((dst), (src), (len));					\
+} while (0)
 
 #endif /* _ASM_MICROBLAZE_CACHEFLUSH_H */
diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c
index 538f1df6761d..d9d63831cc2f 100644
--- a/arch/microblaze/kernel/cpu/cache.c
+++ b/arch/microblaze/kernel/cpu/cache.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
  * Copyright (C) 2007-2009 PetaLogix
- * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ * Copyright (C) 2007-2009 John Williams <john.williams@petalogix.com>
  *
  * This file is subject to the terms and conditions of the GNU General
  * Public License. See the file COPYING in the main directory of this
@@ -13,243 +13,534 @@
 #include <asm/cacheflush.h>
 #include <linux/cache.h>
 #include <asm/cpuinfo.h>
+#include <asm/pvr.h>
 
-/* Exported functions */
+static inline void __invalidate_flush_icache(unsigned int addr)
+{
+	__asm__ __volatile__ ("wic	%0, r0;"	\
+					: : "r" (addr));
+}
+
+static inline void __flush_dcache(unsigned int addr)
+{
+	__asm__ __volatile__ ("wdc.flush	%0, r0;"	\
+					: : "r" (addr));
+}
+
+static inline void __invalidate_dcache(unsigned int baseaddr,
+						unsigned int offset)
+{
+	__asm__ __volatile__ ("wdc.clear	%0, %1;"	\
+					: : "r" (baseaddr), "r" (offset));
+}
 
-void _enable_icache(void)
+static inline void __enable_icache_msr(void)
 {
-	if (cpuinfo.use_icache) {
-#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
-		__asm__ __volatile__ ("					\
-				msrset	r0, %0;				\
-				nop; "					\
-				:					\
-				: "i" (MSR_ICE)				\
+	__asm__ __volatile__ ("	msrset	r0, %0;		\
+				nop; "			\
+			: : "i" (MSR_ICE) : "memory");
+}
+
+static inline void __disable_icache_msr(void)
+{
+	__asm__ __volatile__ ("	msrclr	r0, %0;		\
+				nop; "			\
+			: : "i" (MSR_ICE) : "memory");
+}
+
+static inline void __enable_dcache_msr(void)
+{
+	__asm__ __volatile__ ("	msrset	r0, %0;		\
+				nop; "			\
+				:			\
+				: "i" (MSR_DCE)		\
 				: "memory");
-#else
-		__asm__ __volatile__ ("					\
-				mfs	r12, rmsr;			\
-				nop;					\
-				ori	r12, r12, %0;			\
-				mts	rmsr, r12;			\
-				nop; "					\
-				:					\
-				: "i" (MSR_ICE)				\
-				: "memory", "r12");
-#endif
-	}
 }
 
-void _disable_icache(void)
+static inline void __disable_dcache_msr(void)
 {
-	if (cpuinfo.use_icache) {
-#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
-		__asm__ __volatile__ ("					\
-				msrclr r0, %0;				\
-				nop; "					\
-				:					\
-				: "i" (MSR_ICE)				\
+	__asm__ __volatile__ ("	msrclr	r0, %0;		\
+				nop; "			\
+				:			\
+				: "i" (MSR_DCE)		\
 				: "memory");
-#else
-		__asm__ __volatile__ ("					\
-				mfs	r12, rmsr;			\
-				nop;					\
-				andi	r12, r12, ~%0;			\
-				mts	rmsr, r12;			\
-				nop; "					\
-				:					\
-				: "i" (MSR_ICE)				\
+}
+
+static inline void __enable_icache_nomsr(void)
+{
+	__asm__ __volatile__ ("	mfs	r12, rmsr;	\
+				nop;			\
+				ori	r12, r12, %0;	\
+				mts	rmsr, r12;	\
+				nop; "			\
+				:			\
+				: "i" (MSR_ICE)		\
 				: "memory", "r12");
-#endif
-	}
 }
 
-void _invalidate_icache(unsigned int addr)
+static inline void __disable_icache_nomsr(void)
 {
-	if (cpuinfo.use_icache) {
-		__asm__ __volatile__ ("					\
-				wic	%0, r0"				\
-				:					\
-				: "r" (addr));
-	}
+	__asm__ __volatile__ ("	mfs	r12, rmsr;	\
+				nop;			\
+				andi	r12, r12, ~%0;	\
+				mts	rmsr, r12;	\
+				nop; "			\
+				:			\
+				: "i" (MSR_ICE)		\
+				: "memory", "r12");
 }
 
-void _enable_dcache(void)
+static inline void __enable_dcache_nomsr(void)
 {
-	if (cpuinfo.use_dcache) {
-#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
-		__asm__ __volatile__ ("					\
-				msrset	r0, %0;				\
-				nop; "					\
-				:					\
-				: "i" (MSR_DCE)				\
-				: "memory");
-#else
-		__asm__ __volatile__ ("					\
-				mfs	r12, rmsr;			\
-				nop;					\
-				ori	r12, r12, %0;			\
-				mts	rmsr, r12;			\
-				nop; "					\
-				:					\
-				: "i" (MSR_DCE)			\
+	__asm__ __volatile__ ("	mfs	r12, rmsr;	\
+				nop;			\
+				ori	r12, r12, %0;	\
+				mts	rmsr, r12;	\
+				nop; "			\
+				:			\
+				: "i" (MSR_DCE)		\
 				: "memory", "r12");
-#endif
-	}
 }
 
-void _disable_dcache(void)
+static inline void __disable_dcache_nomsr(void)
 {
-#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
-		__asm__ __volatile__ ("					\
-				msrclr	r0, %0;				\
-				nop; "					\
-				:					\
-				: "i" (MSR_DCE)			\
-				: "memory");
-#else
-		__asm__ __volatile__ ("					\
-				mfs	r12, rmsr;			\
-				nop;					\
-				andi	r12, r12, ~%0;			\
-				mts	rmsr, r12;			\
-				nop; "					\
-				:					\
-				: "i" (MSR_DCE)			\
+	__asm__ __volatile__ ("	mfs	r12, rmsr;	\
+				nop;			\
+				andi	r12, r12, ~%0;	\
+				mts	rmsr, r12;	\
+				nop; "			\
+				:			\
+				: "i" (MSR_DCE)		\
 				: "memory", "r12");
-#endif
 }
 
-void _invalidate_dcache(unsigned int addr)
+
+/* Helper macro for computing the limits of cache range loops */
+#define CACHE_LOOP_LIMITS(start, end, cache_line_length, cache_size)	\
+do {									\
+	int align = ~(cache_line_length - 1);				\
+	end = min(start + cache_size, end);				\
+	start &= align;							\
+	end = ((end & align) + cache_line_length);			\
+} while (0);
+
+/*
+ * Helper macro to loop over the specified cache_size/line_length and
+ * execute 'op' on that cacheline
+ */
+#define CACHE_ALL_LOOP(cache_size, line_length, op)			\
+do {									\
+	unsigned int len = cache_size;					\
+	int step = -line_length;					\
+	BUG_ON(step >= 0);						\
+									\
+	__asm__ __volatile__ (" 1:      " #op " %0, r0;			\
+					bgtid   %0, 1b;			\
+					addk    %0, %0, %1;		\
+					" : : "r" (len), "r" (step)	\
+					: "memory");			\
+} while (0);
+
+
+#define CACHE_ALL_LOOP2(cache_size, line_length, op)			\
+do {									\
+	unsigned int len = cache_size;					\
+	int step = -line_length;					\
+	BUG_ON(step >= 0);						\
+									\
+	__asm__ __volatile__ (" 1:      " #op " r0, %0;			\
+					bgtid   %0, 1b;			\
+					addk    %0, %0, %1;		\
+					" : : "r" (len), "r" (step)	\
+					: "memory");			\
+} while (0);
+
+/* for wdc.flush/clear */
+#define CACHE_RANGE_LOOP_2(start, end, line_length, op)			\
+do {									\
+	int step = -line_length;					\
+	int count = end - start;					\
+	BUG_ON(count <= 0);						\
+									\
+	__asm__ __volatile__ (" 1:	" #op " %0, %1;			\
+					bgtid   %1, 1b;			\
+					addk    %1, %1, %2;		\
+					" : : "r" (start), "r" (count),	\
+					"r" (step) : "memory");		\
+} while (0);
+
+/* It is used only first parameter for OP - for wic, wdc */
+#define CACHE_RANGE_LOOP_1(start, end, line_length, op)			\
+do {									\
+	int step = -line_length;					\
+	int count = end - start;					\
+	BUG_ON(count <= 0);						\
+									\
+	__asm__ __volatile__ (" 1:	addk	%0, %0, %1;		\
+					" #op " %0, r0;			\
+					bgtid   %1, 1b;			\
+					addk    %1, %1, %2;		\
+					" : : "r" (start), "r" (count),	\
+					"r" (step) : "memory");		\
+} while (0);
+
+static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end)
 {
-		__asm__ __volatile__ ("					\
-				wdc	%0, r0"				\
-				:					\
-				: "r" (addr));
+	unsigned long flags;
+
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
+
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.icache_line_length, cpuinfo.icache_size);
+
+	local_irq_save(flags);
+	__disable_icache_msr();
+
+	CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
+
+	__enable_icache_msr();
+	local_irq_restore(flags);
 }
 
-void __invalidate_icache_all(void)
+static void __flush_icache_range_nomsr_irq(unsigned long start,
+				unsigned long end)
 {
-	unsigned int i;
-	unsigned flags;
+	unsigned long flags;
 
-	if (cpuinfo.use_icache) {
-		local_irq_save(flags);
-		__disable_icache();
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
 
-		/* Just loop through cache size and invalidate, no need to add
-			CACHE_BASE address */
-		for (i = 0; i < cpuinfo.icache_size;
-			i += cpuinfo.icache_line_length)
-				__invalidate_icache(i);
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.icache_line_length, cpuinfo.icache_size);
 
-		__enable_icache();
-		local_irq_restore(flags);
-	}
+	local_irq_save(flags);
+	__disable_icache_nomsr();
+
+	CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
+
+	__enable_icache_nomsr();
+	local_irq_restore(flags);
 }
 
-void __invalidate_icache_range(unsigned long start, unsigned long end)
+static void __flush_icache_range_noirq(unsigned long start,
+				unsigned long end)
 {
-	unsigned int i;
-	unsigned flags;
-	unsigned int align;
-
-	if (cpuinfo.use_icache) {
-		/*
-		 * No need to cover entire cache range,
-		 * just cover cache footprint
-		 */
-		end = min(start + cpuinfo.icache_size, end);
-		align = ~(cpuinfo.icache_line_length - 1);
-		start &= align; /* Make sure we are aligned */
-		/* Push end up to the next cache line */
-		end = ((end & align) + cpuinfo.icache_line_length);
-
-		local_irq_save(flags);
-		__disable_icache();
-
-		for (i = start; i < end; i += cpuinfo.icache_line_length)
-			__invalidate_icache(i);
-
-		__enable_icache();
-		local_irq_restore(flags);
-	}
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
+
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.icache_line_length, cpuinfo.icache_size);
+	CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
+}
+
+static void __flush_icache_all_msr_irq(void)
+{
+	unsigned long flags;
+
+	pr_debug("%s\n", __func__);
+
+	local_irq_save(flags);
+	__disable_icache_msr();
+
+	CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
+
+	__enable_icache_msr();
+	local_irq_restore(flags);
+}
+
+static void __flush_icache_all_nomsr_irq(void)
+{
+	unsigned long flags;
+
+	pr_debug("%s\n", __func__);
+
+	local_irq_save(flags);
+	__disable_icache_nomsr();
+
+	CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
+
+	__enable_icache_nomsr();
+	local_irq_restore(flags);
 }
 
-void __invalidate_icache_page(struct vm_area_struct *vma, struct page *page)
+static void __flush_icache_all_noirq(void)
 {
-	__invalidate_icache_all();
+	pr_debug("%s\n", __func__);
+	CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
 }
 
-void __invalidate_icache_user_range(struct vm_area_struct *vma,
-				struct page *page, unsigned long adr,
-				int len)
+static void __invalidate_dcache_all_msr_irq(void)
 {
-	__invalidate_icache_all();
+	unsigned long flags;
+
+	pr_debug("%s\n", __func__);
+
+	local_irq_save(flags);
+	__disable_dcache_msr();
+
+	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc);
+
+	__enable_dcache_msr();
+	local_irq_restore(flags);
 }
 
-void __invalidate_cache_sigtramp(unsigned long addr)
+static void __invalidate_dcache_all_nomsr_irq(void)
 {
-	__invalidate_icache_range(addr, addr + 8);
+	unsigned long flags;
+
+	pr_debug("%s\n", __func__);
+
+	local_irq_save(flags);
+	__disable_dcache_nomsr();
+
+	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc);
+
+	__enable_dcache_nomsr();
+	local_irq_restore(flags);
 }
 
-void __invalidate_dcache_all(void)
+static void __invalidate_dcache_all_noirq_wt(void)
 {
-	unsigned int i;
-	unsigned flags;
-
-	if (cpuinfo.use_dcache) {
-		local_irq_save(flags);
-		__disable_dcache();
-
-		/*
-		 * Just loop through cache size and invalidate,
-		 * no need to add CACHE_BASE address
-		 */
-		for (i = 0; i < cpuinfo.dcache_size;
-			i += cpuinfo.dcache_line_length)
-				__invalidate_dcache(i);
-
-		__enable_dcache();
-		local_irq_restore(flags);
-	}
+	pr_debug("%s\n", __func__);
+	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc)
 }
 
-void __invalidate_dcache_range(unsigned long start, unsigned long end)
+/* FIXME this is weird - should be only wdc but not work
+ * MS: I am getting bus errors and other weird things */
+static void __invalidate_dcache_all_wb(void)
 {
+	pr_debug("%s\n", __func__);
+	CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
+					wdc.clear)
+
+#if 0
 	unsigned int i;
-	unsigned flags;
-	unsigned int align;
-
-	if (cpuinfo.use_dcache) {
-		/*
-		 * No need to cover entire cache range,
-		 * just cover cache footprint
-		 */
-		end = min(start + cpuinfo.dcache_size, end);
-		align = ~(cpuinfo.dcache_line_length - 1);
-		start &= align; /* Make sure we are aligned */
-		/* Push end up to the next cache line */
-		end = ((end & align) + cpuinfo.dcache_line_length);
-		local_irq_save(flags);
-		__disable_dcache();
-
-		for (i = start; i < end; i += cpuinfo.dcache_line_length)
-			__invalidate_dcache(i);
-
-		__enable_dcache();
-		local_irq_restore(flags);
-	}
+
+	pr_debug("%s\n", __func__);
+
+	/* Just loop through cache size and invalidate it */
+	for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length)
+			__invalidate_dcache(0, i);
+#endif
+}
+
+static void __invalidate_dcache_range_wb(unsigned long start,
+						unsigned long end)
+{
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
+
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+	CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.clear);
+}
+
+static void __invalidate_dcache_range_nomsr_wt(unsigned long start,
+							unsigned long end)
+{
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+
+	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
 }
 
-void __invalidate_dcache_page(struct vm_area_struct *vma, struct page *page)
+static void __invalidate_dcache_range_msr_irq_wt(unsigned long start,
+							unsigned long end)
 {
-	__invalidate_dcache_all();
+	unsigned long flags;
+
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+
+	local_irq_save(flags);
+	__disable_dcache_msr();
+
+	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+
+	__enable_dcache_msr();
+	local_irq_restore(flags);
+}
+
+static void __invalidate_dcache_range_nomsr_irq(unsigned long start,
+							unsigned long end)
+{
+	unsigned long flags;
+
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
+
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+
+	local_irq_save(flags);
+	__disable_dcache_nomsr();
+
+	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+
+	__enable_dcache_nomsr();
+	local_irq_restore(flags);
+}
+
+static void __flush_dcache_all_wb(void)
+{
+	pr_debug("%s\n", __func__);
+	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
+				wdc.flush);
 }
 
-void __invalidate_dcache_user_range(struct vm_area_struct *vma,
-				struct page *page, unsigned long adr,
-				int len)
+static void __flush_dcache_range_wb(unsigned long start, unsigned long end)
 {
-	__invalidate_dcache_all();
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
+
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+	CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.flush);
+}
+
+/* struct for wb caches and for wt caches */
+struct scache *mbc;
+
+/* new wb cache model */
+const struct scache wb_msr = {
+	.ie = __enable_icache_msr,
+	.id = __disable_icache_msr,
+	.ifl = __flush_icache_all_noirq,
+	.iflr = __flush_icache_range_noirq,
+	.iin = __flush_icache_all_noirq,
+	.iinr = __flush_icache_range_noirq,
+	.de = __enable_dcache_msr,
+	.dd = __disable_dcache_msr,
+	.dfl = __flush_dcache_all_wb,
+	.dflr = __flush_dcache_range_wb,
+	.din = __invalidate_dcache_all_wb,
+	.dinr = __invalidate_dcache_range_wb,
+};
+
+/* There is only difference in ie, id, de, dd functions */
+const struct scache wb_nomsr = {
+	.ie = __enable_icache_nomsr,
+	.id = __disable_icache_nomsr,
+	.ifl = __flush_icache_all_noirq,
+	.iflr = __flush_icache_range_noirq,
+	.iin = __flush_icache_all_noirq,
+	.iinr = __flush_icache_range_noirq,
+	.de = __enable_dcache_nomsr,
+	.dd = __disable_dcache_nomsr,
+	.dfl = __flush_dcache_all_wb,
+	.dflr = __flush_dcache_range_wb,
+	.din = __invalidate_dcache_all_wb,
+	.dinr = __invalidate_dcache_range_wb,
+};
+
+/* Old wt cache model with disabling irq and turn off cache */
+const struct scache wt_msr = {
+	.ie = __enable_icache_msr,
+	.id = __disable_icache_msr,
+	.ifl = __flush_icache_all_msr_irq,
+	.iflr = __flush_icache_range_msr_irq,
+	.iin = __flush_icache_all_msr_irq,
+	.iinr = __flush_icache_range_msr_irq,
+	.de = __enable_dcache_msr,
+	.dd = __disable_dcache_msr,
+	.dfl = __invalidate_dcache_all_msr_irq,
+	.dflr = __invalidate_dcache_range_msr_irq_wt,
+	.din = __invalidate_dcache_all_msr_irq,
+	.dinr = __invalidate_dcache_range_msr_irq_wt,
+};
+
+const struct scache wt_nomsr = {
+	.ie = __enable_icache_nomsr,
+	.id = __disable_icache_nomsr,
+	.ifl = __flush_icache_all_nomsr_irq,
+	.iflr = __flush_icache_range_nomsr_irq,
+	.iin = __flush_icache_all_nomsr_irq,
+	.iinr = __flush_icache_range_nomsr_irq,
+	.de = __enable_dcache_nomsr,
+	.dd = __disable_dcache_nomsr,
+	.dfl = __invalidate_dcache_all_nomsr_irq,
+	.dflr = __invalidate_dcache_range_nomsr_irq,
+	.din = __invalidate_dcache_all_nomsr_irq,
+	.dinr = __invalidate_dcache_range_nomsr_irq,
+};
+
+/* New wt cache model for newer Microblaze versions */
+const struct scache wt_msr_noirq = {
+	.ie = __enable_icache_msr,
+	.id = __disable_icache_msr,
+	.ifl = __flush_icache_all_noirq,
+	.iflr = __flush_icache_range_noirq,
+	.iin = __flush_icache_all_noirq,
+	.iinr = __flush_icache_range_noirq,
+	.de = __enable_dcache_msr,
+	.dd = __disable_dcache_msr,
+	.dfl = __invalidate_dcache_all_noirq_wt,
+	.dflr = __invalidate_dcache_range_nomsr_wt,
+	.din = __invalidate_dcache_all_noirq_wt,
+	.dinr = __invalidate_dcache_range_nomsr_wt,
+};
+
+const struct scache wt_nomsr_noirq = {
+	.ie = __enable_icache_nomsr,
+	.id = __disable_icache_nomsr,
+	.ifl = __flush_icache_all_noirq,
+	.iflr = __flush_icache_range_noirq,
+	.iin = __flush_icache_all_noirq,
+	.iinr = __flush_icache_range_noirq,
+	.de = __enable_dcache_nomsr,
+	.dd = __disable_dcache_nomsr,
+	.dfl = __invalidate_dcache_all_noirq_wt,
+	.dflr = __invalidate_dcache_range_nomsr_wt,
+	.din = __invalidate_dcache_all_noirq_wt,
+	.dinr = __invalidate_dcache_range_nomsr_wt,
+};
+
+/* CPU version code for 7.20.c - see arch/microblaze/kernel/cpu/cpuinfo.c */
+#define CPUVER_7_20_A	0x0c
+#define CPUVER_7_20_D	0x0f
+
+#define INFO(s)	printk(KERN_INFO "cache: " s " \n");
+
+void microblaze_cache_init(void)
+{
+	if (cpuinfo.use_instr & PVR2_USE_MSR_INSTR) {
+		if (cpuinfo.dcache_wb) {
+			INFO("wb_msr");
+			mbc = (struct scache *)&wb_msr;
+			if (cpuinfo.ver_code < CPUVER_7_20_D) {
+				/* MS: problem with signal handling - hw bug */
+				INFO("WB won't work properly");
+			}
+		} else {
+			if (cpuinfo.ver_code >= CPUVER_7_20_A) {
+				INFO("wt_msr_noirq");
+				mbc = (struct scache *)&wt_msr_noirq;
+			} else {
+				INFO("wt_msr");
+				mbc = (struct scache *)&wt_msr;
+			}
+		}
+	} else {
+		if (cpuinfo.dcache_wb) {
+			INFO("wb_nomsr");
+			mbc = (struct scache *)&wb_nomsr;
+			if (cpuinfo.ver_code < CPUVER_7_20_D) {
+				/* MS: problem with signal handling - hw bug */
+				INFO("WB won't work properly");
+			}
+		} else {
+			if (cpuinfo.ver_code >= CPUVER_7_20_A) {
+				INFO("wt_nomsr_noirq");
+				mbc = (struct scache *)&wt_nomsr_noirq;
+			} else {
+				INFO("wt_nomsr");
+				mbc = (struct scache *)&wt_nomsr;
+			}
+		}
+	}
 }
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 1c3f18ba8af1..5372b24ad049 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -52,11 +52,12 @@ void __init setup_arch(char **cmdline_p)
 	/* irq_early_init(); */
 	setup_cpuinfo();
 
-	__invalidate_icache_all();
-	__enable_icache();
+	microblaze_cache_init();
 
-	__invalidate_dcache_all();
-	__enable_dcache();
+	enable_dcache();
+
+	invalidate_icache();
+	enable_icache();
 
 	setup_memory();
 
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 0c96ac34c316..6de3db04b1a4 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -176,6 +176,11 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	struct rt_sigframe __user *frame;
 	int err = 0;
 	int signal;
+	unsigned long address = 0;
+#ifdef CONFIG_MMU
+	pmd_t *pmdp;
+	pte_t *ptep;
+#endif
 
 	frame = get_sigframe(ka, regs, sizeof(*frame));
 
@@ -216,8 +221,29 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	 Negative 8 offset because return is rtsd r15, 8 */
 	regs->r15 = ((unsigned long)frame->tramp)-8;
 
-	__invalidate_cache_sigtramp((unsigned long)frame->tramp);
-
+	address = ((unsigned long)frame->tramp);
+#ifdef CONFIG_MMU
+	pmdp = pmd_offset(pud_offset(
+			pgd_offset(current->mm, address),
+					address), address);
+
+	preempt_disable();
+	ptep = pte_offset_map(pmdp, address);
+	if (pte_present(*ptep)) {
+		address = (unsigned long) page_address(pte_page(*ptep));
+		/* MS: I need add offset in page */
+		address += ((unsigned long)frame->tramp) & ~PAGE_MASK;
+		/* MS address is virtual */
+		address = virt_to_phys(address);
+		invalidate_icache_range(address, address + 8);
+		flush_dcache_range(address, address + 8);
+	}
+	pte_unmap(ptep);
+	preempt_enable();
+#else
+	flush_icache_range(address, address + 8);
+	flush_dcache_range(address, address + 8);
+#endif
 	if (err)
 		goto give_sigsegv;
 
-- 
cgit v1.2.3


From 233eb92115c87bc3bbfab99e3e198654acf4cd58 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 10 Dec 2009 12:06:03 +0100
Subject: microblaze: Remove show_tmem function

show_tmem function do nothing that's why I removed it.
There is also cleaning of commented ancient code.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/mm/pgtable.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c
index 46c4ca5d15c5..2820081b21ab 100644
--- a/arch/microblaze/mm/pgtable.c
+++ b/arch/microblaze/mm/pgtable.c
@@ -144,7 +144,6 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
 	pmd_t *pd;
 	pte_t *pg;
 	int err = -ENOMEM;
-	/* spin_lock(&init_mm.page_table_lock); */
 	/* Use upper 10 bits of VA to index the first level map */
 	pd = pmd_offset(pgd_offset_k(va), va);
 	/* Use middle 10 bits of VA to index the second-level map */
@@ -158,9 +157,7 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
 		if (mem_init_done)
 			flush_HPTE(0, va, pmd_val(*pd));
 			/* flush_HPTE(0, va, pg); */
-
 	}
-	/* spin_unlock(&init_mm.page_table_lock); */
 	return err;
 }
 
@@ -182,12 +179,6 @@ void __init adjust_total_lowmem(void)
 #endif
 }
 
-static void show_tmem(unsigned long tmem)
-{
-	volatile unsigned long a;
-	a = a + tmem;
-}
-
 /*
  * Map in all of physical memory starting at CONFIG_KERNEL_START.
  */
@@ -197,7 +188,6 @@ void __init mapin_ram(void)
 
 	v = CONFIG_KERNEL_START;
 	p = memory_start;
-	show_tmem(memory_size);
 	for (s = 0; s < memory_size; s += PAGE_SIZE) {
 		f = _PAGE_PRESENT | _PAGE_ACCESSED |
 				_PAGE_SHARED | _PAGE_HWEXEC;
-- 
cgit v1.2.3


From 825c9a359ecd6ba2569e6c38199e7d072ab388e3 Mon Sep 17 00:00:00 2001
From: "steve@digidescorp.com" <steve@digidescorp.com>
Date: Wed, 9 Dec 2009 17:13:42 -0600
Subject: microblaze: nommu: Don't clobber R11 on syscalls

The noMMU syscall trap has a bug that causes R11 to be zero on return to
userland. Remove the extra "save" of R11 responsible for the bug.

Remove reloading of mode indicator because r11 already contains it.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/entry-nommu.S | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
index 9083d85376a4..95b0855802df 100644
--- a/arch/microblaze/kernel/entry-nommu.S
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -208,8 +208,6 @@ ENTRY(_user_exception)
 	lwi	r1, r1, TS_THREAD_INFO		/* get the thread info */
 	/* calculate kernel stack pointer */
 	addik	r1, r1, THREAD_SIZE - PT_SIZE
-	swi	r11, r0, PER_CPU(R11_SAVE)	/* temporarily save r11 */
-	lwi	r11, r0, PER_CPU(KM)		/* load mode indicator */
 2:
 	swi	r11, r1, PT_MODE		/* store the mode */
 	lwi	r11, r0, PER_CPU(R11_SAVE)	/* reload r11 */
-- 
cgit v1.2.3


From 571202f50fad0aeb36661c79de9beed052347df8 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Fri, 11 Dec 2009 12:54:04 +0100
Subject: microblaze: Remove rt_sigsuspend wrapper

Generic rt_sigsuspend syscalls doesn't need any asm wrapper.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/entry.S         | 11 -----------
 arch/microblaze/kernel/signal.c        |  1 -
 arch/microblaze/kernel/syscall_table.S |  2 +-
 3 files changed, 1 insertion(+), 13 deletions(-)

diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index b061d98a3218..3bad4ff49471 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -500,17 +500,6 @@ C_ENTRY(sys_execve):
 	brid	microblaze_execve;	/* Do real work (tail-call).*/
 	nop;
 
-C_ENTRY(sys_rt_sigsuspend_wrapper):
-	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	swi	r4, r1, PTO+PT_R4;
-	la	r7, r1, PTO;		/* add user context as 3rd arg */
-	brlid	r15, sys_rt_sigsuspend;	/* Do real work.*/
-	nop;
-	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	lwi	r4, r1, PTO+PT_R4;
-	bri ret_from_trap /* fall through will not work here due to align */
-	nop;
-
 C_ENTRY(sys_rt_sigreturn_wrapper):
 	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
 	swi	r4, r1, PTO+PT_R4;
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 6de3db04b1a4..d8d3bb396cd6 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -44,7 +44,6 @@
 
 asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall);
 
-
 asmlinkage long
 sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		struct pt_regs *regs)
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 4e666d9c1261..4088be7d4e29 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -183,7 +183,7 @@ ENTRY(sys_call_table)
 	.long sys_rt_sigpending
 	.long sys_rt_sigtimedwait
 	.long sys_rt_sigqueueinfo
-	.long sys_rt_sigsuspend_wrapper
+	.long sys_rt_sigsuspend
 	.long sys_pread64		/* 180 */
 	.long sys_pwrite64
 	.long sys_chown
-- 
cgit v1.2.3