From 1082345290dbc66c19877662cb24c18ee4ae1296 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 10 Jun 2010 17:02:12 +0100 Subject: sata_sil24: Use memory barriers before issuing commands The data in the cmd_block buffers may reach the main memory after the writel() to the device ports. This patch introduces two calls to wmb() to ensure the relative ordering. Signed-off-by: Catalin Marinas Tested-by: Colin Tuckley Cc: Tejun Heo Cc: Jeff Garzik Signed-off-by: Jeff Garzik --- drivers/ata/sata_sil24.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index a7f0139c3aae..be7726d7686d 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -622,6 +622,11 @@ static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp, irq_enabled = readl(port + PORT_IRQ_ENABLE_SET); writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR); + /* + * The barrier is required to ensure that writes to cmd_block reach + * the memory before the write to PORT_CMD_ACTIVATE. + */ + wmb(); writel((u32)paddr, port + PORT_CMD_ACTIVATE); writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4); @@ -895,6 +900,11 @@ static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc) paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block); activate = port + PORT_CMD_ACTIVATE + tag * 8; + /* + * The barrier is required to ensure that writes to cmd_block reach + * the memory before the write to PORT_CMD_ACTIVATE. + */ + wmb(); writel((u32)paddr, activate); writel((u64)paddr >> 32, activate + 4); -- cgit v1.2.3