summaryrefslogtreecommitdiff
path: root/sound/soc/omap
AgeCommit message (Collapse)AuthorFilesLines
2013-07-04ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabledPavel Machek1-1/+1
We still need video & sound drivers with device tree enabled. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-06-21ASoC: omap: Fix the leftover CONFIG_SND_SOC_HDMI_CODECTakashi Iwai1-1/+1
Replace the leftover CONFIG_SND_SOC_OMAP_HDMI_CODEC in sound/soc/omap/Kconfig with CONFIG_SND_SOC_HDMI_CODEC, which was forgotten in the commit bf7c6e6c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-17Merge remote-tracking branch 'asoc/topic/omap' into asoc-nextMark Brown2-3/+0
2013-06-05ASoC: omap-hdmi-codec: make the driver common for other SoCsBarry Song1-1/+1
to support HDMI on CSR SiRFprimaII and atlasVI, we need one more HDMI pseudo codec, rather than add a new driver, we can make omap HDMI codec common for other SoCs as well. then the omap-hdmi codec becomes a generic HDMI pseudo- codec as HDMI audio features depend on HDMI specification not on SoCs. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-05-30ASoC: OMAP: Remove obsolete Makefile linePaul Bolle1-1/+0
Support for omap2evm was removed in v3.0. But only one of its two lines in this Makefile was removed. Remove the second line too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: omap-mcbsp: Remove redundant platform_set_drvdata()Sachin Kamat1-2/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-18Merge tag 'asoc-v3.10-2' of ↵Takashi Iwai1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: More updates for v3.10 The main additional change here is Lars-Peter's DMA work plus the platform conversions which have been tested - getting this in mainline will make life easier for development after the merge window. These factor a large chunk of code out of the drivers for the platforms using dmaengine, greatly simplifying development.
2013-04-17ASoC: dmaengine-pcm: Make requesting the DMA channel at PCM open optionalLars-Peter Clausen1-3/+4
Refactor the dmaengine PCM library to allow the DMA channel to be requested before opening a PCM substream. snd_dmaengine_pcm_open() now expects a DMA channel instead of a filter function and filter parameter as its parameters. snd_dmaengine_pcm_close() is updated to not release the DMA channel. This allows a dmaengine based PCM driver to request its channels before the substream is opened. The patch also introduces two new functions, snd_dmaengine_pcm_open_request_chan() and snd_dmaengine_pcm_close_release_chan(), which have the same signature and behaviour of the old snd_dmaengine_pcm_{open,close}() and internally use the new variants of these functions. All users of snd_dmaengine_pcm_{open,close}() are updated to use snd_dmaengine_pcm_open_request_chan() and snd_dmaengine_pcm_close_release_chan(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-12Merge remote-tracking branch 'asoc/topic/dma' into asoc-nextMark Brown16-227/+122
2013-04-03ASoC: omap: Use common DAI DMA dataLars-Peter Clausen16-139/+54
Use the common DAI DMA data struct for omap, this allows us to use the common helper function to configure the DMA slave config based on the DAI DMA data. For omap-dmic and omap-mcpdm also move the DMA data from a global variable to the driver state struct. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-03Merge branch 'topic/omap' of ↵Mark Brown3-42/+62
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into HEAD
2013-03-26ASoC: switch over to use snd_soc_register_component() on omap hdmiKuninori Morimoto1-2/+7
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26ASoC: switch over to use snd_soc_register_component() on omap dmicKuninori Morimoto1-2/+7
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26ASoC: switch over to use snd_soc_register_component() on omap mcpdmKuninori Morimoto1-2/+7
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26ASoC: switch over to use snd_soc_register_component() on omap mcbspKuninori Morimoto1-2/+7
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26ASoC: omap-pcm: No need to wrap snd_dmaengine_pcm_close()Lars-Peter Clausen1-7/+1
If a PCM driver using the dmaengine PCM helper functions doesn't need to do anything special in its pcm_close callback, snd_dmaengine_pcm_close can be used directly for as the pcm_close callback and there is no need to wrap it in a custom function. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26ASoC: omap: Call omap_mcbsp_set_threshold() from mcbsp hw_paramsLars-Peter Clausen3-40/+6
The omap PCM driver provides a set_threshold callback which gets called by the PCM driver when either playback or capture is started. The only DAI driver which sets this callback is the mcbsp driver. This patch removes the callback from the PCM driver and moves the invocation of the omap_mcbsp_set_threshold() function to the mcbsp hw_params callback since this is the only place where the threshold size can change. Doing so allows us to use the default dmaengine PCM trigger callback in the omap PCM driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-20ASoC: omap-mcpdm: Remove leftower define for IO addressPeter Ujfalusi1-2/+0
The IO address is no longer hardwired into the driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-20ASoC: omap-mcpdm: Fix for full duplex audio use casePeter Ujfalusi1-1/+26
Due to HW limitation within OMAP McPDM IP uplink and downlink need to be started at the same time. This causes issues when we have two streams running, for example: arecord | aplay In this case the playback stream would have no channels enabled since at the capture start we are not aware that a playback is going to start. The workaround is to configure the other direction to stereo when the first stream is started. When the second stream is coming we check the new stream's number of channels against the pre-configured channels. If it does not match we stop and restart McPDM to update the configuration. This might result a small pop. If the coming stream is a match we do nothing in the McPDM driver. This workaround can handle most use cases without the need to restart McPDM. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-20ASoC: omap-mcpdm: Collect link direction configuration under a structPeter Ujfalusi1-17/+24
mcpdm_link_config will collect the link direction related configurations like channel masks, FIFO threshold. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-13ASoC: omap: convert to devm_ioremap_resource()Silviu-Mihai Popescu2-11/+6
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-06ASoC: omap3pandora: Fix compilation errorPeter Ujfalusi1-1/+1
Fixes: sound/soc/omap/omap3pandora.c: In function ‘omap3pandora_dac_event’: sound/soc/omap/omap3pandora.c:92:19: error: request for member ‘dev’ in something not a structure or union make[3]: *** [sound/soc/omap/omap3pandora.o] Error 1 Which is introduced by: dd194b4 ASoC: omap: Check regulator enable for DAC on Pandora Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-04ASoC: omap: Check regulator enable for DAC on PandoraMark Brown1-1/+7
This will probably never fail but it's better style. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
2013-03-04ASoC: omap-dmic: Clean up with devm_request_and_ioremapSebastien Guiriec1-9/+2
Clean up dmic code with devm_request_and_ioremap function. Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-04ASoC: omap-mcpdm: Clean up with devm_* functionSebastien Guiriec1-9/+5
Clean up McPDM driver with devm_ function. Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-12Merge remote-tracking branch 'asoc/topic/omap' into asoc-nextMark Brown1-4/+0
2013-02-11ASoC: omap-mcpdm: Remove useless ressource get.Sebastien Guiriec1-4/+0
Remove unused memory ressource get from McPDM driver. Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-11Merge remote-tracking branch 'asoc/topic/twl' into asoc-nextMark Brown6-512/+208
2013-02-11Merge remote-tracking branch 'asoc/topic/tlv320aic3x' into asoc-nextMark Brown2-6/+6
2013-02-05ASoC: omap-pcm: No need to set constraint at open timePeter Ujfalusi1-11/+3
The same constraint is going to be set in the snd_dmaengine_pcm_open() function, so there is no need to set it here as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-04ASoC: tlv320aic3x: Convert mic bias to a supply widgetHebbar Gururaja2-6/+6
Convert MicBias widgets to supply widget. On tlv320aic3x, Mic bias power on/off shares the same register bits with output mic bias voltage. So, when power on mic bias, we need reclaim it to voltage value. Provide a new platform data so that the micbias voltage can be sent according to board requirement. Now since tlv320aic3x codec driver is DT aware, update dt files and functions to handle this new "micbias-vg" platform data. Because of sharing of bits, when enabling the micbias, voltage also needs to be updated. So use SND_SOC_DAPM_POST_PMU & SND_SOC_DAPM_PRE_PMD macro to create an event to handle this. Since micbias is converted to supply widget, updated machine drivers as well. This change is runtime tested on da850-evm with audio loopback (arecord|aplay) for confirmation. Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11ASoC: OMAP: HDMI: Initialize IEC-60958 channel status wordRicardo Neri1-0/+2
As the IEC-60958 channel status word is set by ANDing and ORing with the appropriate definitions, the word bytes need to be initialized to zero to avoid misconfiguration due to previous hw_params calls. Signed-off-by: Ricardo Neri <rneri@dextratech.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: OMAP: Remove obsolete machine drivers for Zoom2 and SDP3430Peter Ujfalusi4-459/+0
These boards are using the common omap-twl4030 machine driver, no need for separate machine drivers anymore. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: omap-twl4030: Add support for routing, voice port and jack detectPeter Ujfalusi2-2/+204
Update the common machine driver to support more boards including Zoom2 and SDP3430. - Support for voice port of twl4030 - HS jack plug detection support - The audio routing can be fine tuned via pdata or via provided routing table from DT. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: sdp3430: No need to configure pin mux for extmutePeter Ujfalusi1-18/+0
The codec driver takes care of this. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: twl4030: Convert MICBIAS to SUPPLY widgetPeter Ujfalusi3-18/+18
In order to avoid breakage update the machine drivers at the same time using twl4030: omap3pandora, sdp3430 and zoom2 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: sdp3430: No need to configure the Voice port anymorePeter Ujfalusi1-15/+0
The codec driver takes care of these bits. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: zoom2: No need to configure the Voice port anymorePeter Ujfalusi1-14/+0
The codec driver takes care of these bits. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-13Merge tag 'sound-3.8' of ↵Linus Torvalds12-42/+34
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This update contains a fairly wide range of changes all over in sound subdirectory, mainly because of UAPI header moves by David and __dev* annotation removals by Bill. Other highlights are: - Introduced the support for wallclock timestamps in ALSA PCM core - Add the poll loop implementation for HD-audio jack detection - Yet more VGA-switcheroo fixes for HD-audio - New VIA HD-audio codec support - More fixes on resource management in USB audio and MIDI drivers - More quirks for USB-audio ASUS Xonar U3, Reloop Play, Focusrite, Roland VG-99, etc - Add support for FastTrack C400 usb-audio - Clean ups in many drivers regarding firmware loading - Add PSC724 Ultiimate Edge support to ice1712 - A few hdspm driver updates - New Stanton SCS.1d/1m FireWire driver - Standardisation of the logging in ASoC codes - DT and dmaengine support for ASoC Atmel - Support for Wolfson ADSP cores - New drivers for Freescale/iVeia P1022 and Maxim MAX98090 - Lots of other ASoC driver fixes and developments" Fix up trivial conflicts. And go out on a limb and assume the dts file 'status' field of one of the conflicting things was supposed to be "disabled", not "disable" like in pretty much all other cases. * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits) ALSA: hda - Move runtime PM check to runtime_idle callback ALSA: hda - Add stereo-dmic fixup for Acer Aspire One 522 ALSA: hda - Avoid doubly suspend after vga switcheroo ALSA: usb-audio: Enable S/PDIF on the ASUS Xonar U3 ALSA: hda - Check validity of CORB/RIRB WP reads ALSA: hda - use usleep_range in link reset and change timeout check ALSA: HDA: VIA: Add support for codec VT1808. ALSA: HDA: VIA Add support for codec VT1705CF. ASoC: codecs: remove __dev* attributes ASoC: utils: remove __dev* attributes ASoC: ux500: remove __dev* attributes ASoC: txx9: remove __dev* attributes ASoC: tegra: remove __dev* attributes ASoC: spear: remove __dev* attributes ASoC: sh: remove __dev* attributes ASoC: s6000: remove __dev* attributes ASoC: OMAP: remove __dev* attributes ASoC: nuc900: remove __dev* attributes ASoC: mxs: remove __dev* attributes ASoC: kirkwood: remove __dev* attributes ...
2012-12-10ASoC: OMAP: remove __dev* attributesBill Pemberton11-33/+32
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-03ASoC: zoom2: Remove HS mux GPIO handling to avoid kernel crash due to BUG_ON()Peter Ujfalusi1-7/+0
The machine driver try to use GPIO15 of twl4030 for HS MUX which supposed to select between TWL's HSOL/R and tlv320aic3254's HPL/R. The TWL's GPIO allocated dynamically so the (OMAP_MAX_GPIO_LINES + 15) is no longer valid GPIO number causing a kernel crash due to BUG_ON() Also the current machine driver supports only TWL audio currently: there is no need to control the GPIO. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-30ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform supportTony Lindgren3-6/+9
We cannot include any plat or mach headers for the multiplatform support. Fix the issue by defining local mcbsp_omap1(). cc: Peter Ujfalusi <peter.ujfalusi@ti.com> cc: Liam Girdwood <lrg@ti.com> cc: Mark Brown <broonie@opensource.wolfsonmicro.com> cc: Jaroslav Kysela <perex@perex.cz> cc: Takashi Iwai <tiwai@suse.de> cc: alsa-devel@alsa-project.org Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-28ASoC: omap-abe-twl6040: Use "ti,jack-detection" DT property as booleanPeter Ujfalusi1-2/+2
Handle the jack detection inforamtion as bool from devicetree. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform supportTony Lindgren3-6/+9
We cannot include any plat or mach headers for the multiplatform support. Fix the issue by defining local mcbsp_omap1(). Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-09Merge branch 'linus' into omap-for-v3.8/cleanup-headers-prepare-multiplatform-v3Tony Lindgren2-2/+4
2012-11-02ARM: OMAP: Remove NEED_MACH_GPIO_HTony Lindgren5-9/+0
Omap no longer needs this option, mach/gpio.h is empty. Also remove mach/irqs.h from gpio-omap.h and include it directly from the related omap1 gpio init files. Otherwise omap2+ build fails for MULTI_PLATFORM. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: alsa-devel@alsa-project.org Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-27ASoC: omap-dmic: Correct functional clock namePeter Ujfalusi1-2/+2
We should really use "fck" when asking for the functional clock and not "dmic_fck". This way we can ensure that multiple dmic modules can exist in the system. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-27ASoC: zoom2: Fix compile error by including correct header filesTony Lindgren1-3/+2
Also drop the includes that are no longer needed and just cause problems for the ARM common zImage. Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> [tony@atomide.com: updated to drop unneeded headers] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-24Merge tag 'omap-for-v3.8/cleanup-headers-signed' into ↵Tony Lindgren1-2/+7
omap-for-v3.8/cleanup-headers-serial-take2 This is the first set of omap cleanup patches for v3.8 merge window to remove most of the remaining plat includes to get us closer to ARM common zImage support. To avoid a huge amount of trivial merge conflicts with includes, this branch is based on several small topic branches coordinated with the driver subsystem maintainers. These branches are based on v3.7-rc1 and can also be merged into the related driver subsystem branches as needed: omap-for-v3.8/cleanup-headers-prepare few trivial driver changes omap-for-v3.8/cleanup-headers-dma move of the DMA header omap-for-v3.8/cleanup-headers-gpmc GPMC and MTD changes omap-for-v3.8/cleanup-headers-mmc MMC related changes omap-for-v3.8/cleanup-headers-dss DSS related changes omap-for-v3.8/cleanup-headers-asoc ASoC related changes Note that for the dma-omap.h, it was decided that it should be is completed. For the related discussion, please see: https://patchwork.kernel.org/patch/1519591/# After these patches we still have a few plat headers remaining that will be handled in later pull requests.
2012-10-18Merge branch 'omap-for-v3.8/cleanup-headers-asoc' into ↵Tony Lindgren2-8/+3
omap-for-v3.8/cleanup-headers
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 18:06:22 +0000