summaryrefslogtreecommitdiff
path: root/fs/ocfs2
AgeCommit message (Collapse)AuthorFilesLines
2008-03-10ocfs2: Fix NULL pointer dereferences in o2netTao Ma1-5/+4
In some situations, ocfs2_set_nn_state might get called with sc = NULL and valid = 0. If sc = NULL, we can't dereference it to get the o2nm_node member. Instead, do what o2net_initialize_handshake does and use NULL when calling o2net_reconnect_delay and o2net_idle_timeout. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-10ocfs2/dlm: dlm_thread should not sleep while holding the dlm_spinlockSunil Mushran1-2/+4
This patch addresses the bug in which the dlm_thread could go to sleep while holding the dlm_spinlock. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-10ocfs2/dlm: Print message showing the recovery masterSunil Mushran1-3/+3
Knowing the dlm recovery master helps in debugging recovery issues. This patch prints a message on the recovery master node. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-10ocfs2/dlm: Add missing dlm_lockres_put()sSunil Mushran1-1/+10
dlm_master_request_handler() forgot to put a lockres when dlm_assert_master_worker() failed or was skipped. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-10ocfs2/dlm: Add missing dlm_lockres_put()s in migration pathSunil Mushran2-6/+35
During migration, the recovery master node may be asked to master a lockres it may not know about. In that case, it would not only have to create a lockres and add it to the hash, but also remember to to do the _put_ corresponding to the kref_init in dlm_init_lockres(), as soon as the migration is completed. Yes, we don't wait for the dlm_purge_lockres() to do that matching put. Note the ref added for it being in the hash protects the lockres from being freed prematurely. This patch adds that missing put, as described above, to plug a memleak. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-10ocfs2/dlm: Add missing dlm_lock_put()sSunil Mushran2-0/+12
Normally locks for remote nodes are freed when that node sends an UNLOCK message to the master. The master node tags an DLM_UNLOCK_FREE_LOCK action to do an extra put on the lock at the end. However, there are times when the master node has to free the locks for the remote nodes forcibly. Two cases when this happens are: 1. When the master has migrated the lockres plus all locks to another node. 2. When the master is clearing all the locks of a dead node. It was in the above two conditions that the dlm was missing the extra put. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-10ocfs2: Fix an endian bug in online resize.Tao Ma1-1/+1
In ocfs2_group_add, 'cr' is a disk field of type 'ocfs2_chain_rec', and we were putting cpu byteorder values into it. Swap things to the right endian before storing. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-10[PATCH] [OCFS2]: constify function pointer tablesJan Engelhardt1-1/+1
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-10ocfs2: Fix endian bug in o2dlm protocol negotiation.Joel Becker2-45/+76
struct dlm_query_join_packet is made up of four one-byte fields. They are effectively in big-endian order already. However, little-endian machines swap them before putting the packet on the wire (because query_join's response is a status, and that status is treated as a u32 on the wire). Thus, a big-endian and little-endian machines will treat this structure differently. The solution is to have little-endian machines swap the structure when converting from the structure to the u32 representation. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-10ocfs2: Use dlm_print_one_lock_resource for lock resource printTao Ma3-4/+4
__dlm_print_one_lock_resource must be called with spin_lock the res->spinlock. While in some cases, we use it without this precondition and lead to the failure of assert_spin_locked. So call dlm_print_one_lock_resource instead. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-10[PATCH] fs/ocfs2/dlm/dlmdomain.c: fix printk warningAndrew Morton1-1/+1
fs/ocfs2/dlm/dlmdomain.c: In function 'dlm_send_join_cancels': fs/ocfs2/dlm/dlmdomain.c:983: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'long unsigned int' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-03[PATCH] fs/ocfs2/aops.c: Correct use of ! and &Julia Lawall1-1/+1
In commit e6bafba5b4765a5a252f1b8d31cbf6d2459da337, a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. This is not tested and clearly changes the semantics, so it is only something to consider. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-03[2.6 patch] ocfs2: make dlm_do_assert_master() staticAdrian Bunk1-3/+3
This patch makes the needlessly global dlm_do_assert_master() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-03[2.6 patch] make ocfs2_downconvert_thread() staticAdrian Bunk1-1/+1
This patch makes the needlessly global ocfs2_downconvert_thread() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-03[2.6 patch] fs/ocfs2/: possible cleanupsAdrian Bunk4-22/+15
This patch contains the following cleanups that are now possible: - make the following needlessly global functions static: - dlmglue.c:ocfs2_process_blocked_lock() - heartbeat.c:ocfs2_node_map_init() - #if 0 the following unused global function plus support functions: - heartbeat.c:ocfs2_node_map_is_only() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-03[PATCH] ocfs2: le*_add_cpu conversionMarcin Slusarz2-5/+3
replace all: little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) + expression_in_cpu_byteorder); with: leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder); generated with semantic patch Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-03ocfs2: Fix writeout in ocfs2_data_convert_worker()Mark Fasheh1-1/+1
Commit f1f540688eae66c274ff1c1133b5d9c687b28f58 "optimized" ocfs2_data_convert_worker() to "only do work for regular files". Unfortunately, I left out a '!', which casued it to *skip* regular files. This was hidden from testing until recently because the default data journaling mode (data=ordered) doesn't exercise this code. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2008-03-03ocfs2: Enable localalloc for local mountsSunil Mushran1-3/+0
Commit 2fbe8d1ebe004425b4f7b8bba345623d2280be82 disabled localalloc for local mounts. This caused issues as ocfs2 uses localalloc to provide write locality. This patch enables localalloc for local mounts. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-02-08byteorder: move le32_add_cpu & friends from OCFS2 to coreMarcin Slusarz5-78/+0
This patchset moves le*_add_cpu and be*_add_cpu functions from OCFS2 to core header (1st), converts ext3 filesystem to this API (2nd) and replaces XFS different named functions with new ones (3rd). There are many places where these functions will be useful. Just look at: grep -r 'cpu_to_[ble12346]*([ble12346]*_to_cpu.*[-+]' linux-src/ Patch for ext3 is an example how conversions will probably look like. This patch: - move inline functions which add native byte order variable to little/big endian variable to core header * le16_add_cpu(__le16 *var, u16 val) * le32_add_cpu(__le32 *var, u32 val) * le64_add_cpu(__le64 *var, u64 val) * be32_add_cpu(__be32 *var, u32 val) - add for completeness: * be16_add_cpu(__be16 *var, u16 val) * be64_add_cpu(__be64 *var, u64 val) Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ocfs2: Negotiate locking protocol versions.Joel Becker12-34/+288
Currently, when ocfs2 nodes connect via TCP, they advertise their compatibility level. If the versions do not match, two nodes cannot speak to each other and they disconnect. As a result, this provides no forward or backwards compatibility. This patch implements a simple protocol negotiation at the dlm level by introducing a major/minor version number scheme for entities that communicate. Specifically, o2dlm has a major/minor version for interaction with o2dlm on other nodes, and ocfs2 itself has a major/minor version for interacting with the filesystem on other nodes. This will allow rolling upgrades of ocfs2 clusters when changes to the locking or network protocols can be done in a backwards compatible manner. In those cases, only the minor number is changed and the negotatied protocol minor is returned from dlm join. In the far less likely event that a required protocol change makes backwards compatibility impossible, we simply bump the major number. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-02-05Pagecache zeroing: zero_user_segment, zero_user_segments and zero_userChristoph Lameter2-4/+4
Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-03fs/: Spelling fixesJoe Perches4-4/+4
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-01-28ocfs2: Fix userspace ABI breakage in sysfsJoel Becker1-1/+1
The userspace ABI of ocfs2's internal cluster stack (o2cb) was broken by commit c60b71787982cefcf9fa09aa281fa8c4c685d557 "kset: convert ocfs2 to use kset_create". Specifically, the '/sys/o2cb' kset was moved to '/sys/fs/o2cb'. This breaks all ocfs2 tools and renders the filesystem unmountable. This fix moves '/sys/o2cb' back where it belongs. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: clean up bh null checksMark Fasheh2-15/+8
If we know a buffer_head is non-null, then brelse() is unnecessary and put_bh() can be used instead. Also, an explicit check for NULL is unnecessary when using brelse(). This patch only covers buffer_head_io.c and resize.c, which have recently added code which exhibits this problem. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: document access rules for blocked_lock_listMark Fasheh1-0/+6
ocfs2_super->blocked_lock_list and ocfs2_super->blocked_lock_count have some usage restrictions which aren't immediately obvious to anyone reading the code. It's a good idea to document this so that we avoid making costly mistakes in the future. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: bump version numberMark Fasheh4-4/+4
Bump the printed version to 1.5.0. This helps us quickly identify which version of Ocfs2 a bug filer is running. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2/dlm: Clear joining_node on hearbeat node downTao Ma1-6/+6
Currently the process of dlm join contains 2 steps: query join and assert join. After query join, the joined node will set its joining_node. So if the joining node happens to panic before the 2nd step, the joined node will fail to clear its joining_node flag because that node isn't in the domain map. It at least cause 2 problems. 1. All the new join request will fail. So no new node can mount the volume. 2. The joined node can't umount the volume since during the umount process it has to wait for the joining_node to be unknown. So the umount will be hanged. The solution is to clear the joining_node before we check the domain map. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: convert byte order of constant instead of variableMarcin Slusarz2-6/+1
Convert byte order of constant instead of variable it will be done at compile time vs run time. Remove unused le32_and_cpu. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Update default cluster timeoutsSunil Mushran2-3/+3
Lots of people are having trouble with the default timeouts, which are too low. These new values are derived from an informal survey taken on ocfs2-users, as well as data from bug reports. This should reduce the amount of cluster disconnects and subsequent fencing seen during normal workloads. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: printf fixesJan Kara1-2/+2
Explicitely convert loff_t to long long in printf. Just for sure... Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Use generic_file_llseekJan Kara1-0/+2
We should use generic_file_llseek() and not default_llseek() so that s_maxbytes gets properly checked when seeking. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Safer read_inline_data()Jan Kara1-3/+4
In ocfs2_read_inline_data() we should store file size in loff_t. Although the file size should fit in 32 bits we cannot be sure in case filesystem is corrupted. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Silence false lockdep warningsJan Kara7-11/+20
Create separate lockdep lock classes for system file's i_mutexes. They are used to guard allocations and similar things and thus rank differently than i_mutex of a regular file or directory. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25[PATCH 2/2] ocfs2: cluster aware flock()Mark Fasheh6-1/+236
Hook up ocfs2_flock(), using the new flock lock type in dlmglue.c. A new mount option, "localflocks" is added so that users can revert to old functionality as need be. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25[PATCH 1/2] ocfs2: add flock lock typeMark Fasheh5-0/+284
This adds a new dlmglue lock type which is intended to back flock() requests. Since these locks are driven from userspace, usage rules are much more liberal than the typical Ocfs2 internal cluster lock. As a result, we can't make use of most dlmglue features - lock caching and lock level optimizations in particular. Additionally, userspace is free to deadlock itself, so we have to deal with that in the same way as the rest of the kernel - by allowing a signal to abort a lock request. In order to keep ocfs2_cluster_lock() complexity down, ocfs2_file_lock() does it's own dlm coordination. We still use the same helper functions though, so duplicated code is kept to a minimum. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Local alloc window size changeable via mount optionSunil Mushran5-14/+59
Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Support commit= mount optionMark Fasheh3-2/+30
Mostly taken from ext3. This allows the user to set the jbd commit interval, in seconds. The default of 5 seconds stays the same, but now users can easily increase the commit interval. Typically, this would be increased in order to benefit performance at the expense of data-safety. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Add missing permission checksMark Fasheh1-0/+6
Check that an online resize is being driven by a user with permission to change system resource limits. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25[PATCH 2/2] ocfs2: Implement group add for online resizeTao Ma5-1/+269
This patch adds the ability for a userspace program to request that a properly formatted cluster group be added to the main allocation bitmap for an Ocfs2 file system. The request is made via an ioctl, OCFS2_IOC_GROUP_ADD. On a high level, this is similar to ext3, but we use a different ioctl as the structure which has to be passed through is different. During an online resize, tunefs.ocfs2 will format any new cluster groups which must be added to complete the resize, and call OCFS2_IOC_GROUP_ADD on each one. Kernel verifies that the core cluster group information is valid and then does the work of linking it into the global allocation bitmap. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25[PATCH 1/2] ocfs2: Add group extend for online resizeTao Ma10-7/+518
This patch adds the ability for a userspace program to request an extend of last cluster group on an Ocfs2 file system. The request is made via ioctl, OCFS2_IOC_GROUP_EXTEND. This is derived from EXT3_IOC_GROUP_EXTEND, but is obviously Ocfs2 specific. tunefs.ocfs2 would call this for an online-resize operation if the last cluster group isn't full. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Initalize bitmap_cpg of ocfs2_super to be the maximum.Tao Ma1-18/+1
This value is initialized from global_bitmap->id2.i_chain.cl_cpg. If there is only 1 group, it will be equal to the total clusters in the volume. So as for online resize, it should change for all the nodes in the cluster. It isn't easy and there is no corresponding lock for it. bitmap_cpg is only used in 2 areas: 1. Check whether the suballoc is too large for us to allocate from the global bitmap, so it is little used. And now the suballoc size is 2048, it rarely meet this situation and the check is almost useless. 2. Calculate which group a cluster belongs to. We use it during truncate to figure out which cluster group an extent belongs too. But we should be OK if we increase it though as the cluster group calculated shouldn't change and we only ever have a small bitmap_cpg on file systems with a single cluster group. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Readpages supportMark Fasheh1-2/+66
Add ->readpages support to Ocfs2. This is rather trivial - all it required is a small update to ocfs2_get_block (for mapping full extents via b_size) and an ocfs2_readpages() function which partially mirrors ocfs2_readpage(). Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Rename ocfs2_meta_[un]lockMark Fasheh16-144/+144
Call this the "inode_lock" now, since it covers both data and meta data. This patch makes no functional changes. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Remove data locksMark Fasheh9-214/+22
The meta lock now covers both meta data and data, so this just removes the now-redundant data lock. Combining locks saves us a round of lock mastery per inode and one less lock to ping between nodes during read/write. We don't lose much - since meta locks were always held before a data lock (and at the same level) ordered writeout mode (the default) ensured that flushing for the meta data lock also pushed out data anyways. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Add data downconvert worker to inode lockMark Fasheh1-0/+5
In order to extend inode lock coverage to inode data, we use the same data downconvert worker with only a small modification to only do work for regular files. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Remove mount/unmount votesMark Fasheh15-967/+179
The node maps that are set/unset by these votes are no longer relevant, thus we can remove the mount and umount votes. Since those are the last two remaining votes, we can also remove the entire vote infrastructure. The vote thread has been renamed to the downconvert thread, and the small amount of functionality related to managing it has been moved into fs/ocfs2/dlmglue.c. All references to votes have been removed or updated. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Remove fs dependency on ocfs2_heartbeat moduleMark Fasheh3-83/+0
Now that the dlm exposes domain information to us, we don't need generic node up / node down callbacks. And since the DLM is only telling us when a node goes down unexpectedly, we no longer need to optimize away node down callbacks via the umount map. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2_dlm: Call node eviction callbacks from heartbeat handlerMark Fasheh1-0/+7
With this, a dlm client can take advantage of the group protocol in the dlm to get full notification whenever a node within the dlm domain leaves unexpectedly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-24kset: convert ocfs2 to use kset_createGreg Kroah-Hartman2-64/+23
Dynamically create the kset instead of declaring it statically. Also use the new kobj_attribute which cleans up this file a _lot_. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24kobject: remove struct kobj_type from struct ksetGreg Kroah-Hartman2-2/+2
We don't need a "default" ktype for a kset. We should set this explicitly every time for each kset. This change is needed so that we can make ksets dynamic, and cleans up one of the odd, undocumented assumption that the kset/kobject/ktype model has. This patch is based on a lot of help from Kay Sievers. Nasty bug in the block code was found by Dave Young <hidave.darkstar@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 12:49:16 +0000