summaryrefslogtreecommitdiff
path: root/fs/ceph/ioctl.c
AgeCommit message (Collapse)AuthorFilesLines
2017-02-20ceph: fix bogus endianness change in ceph_ioctl_set_layoutJeff Layton1-2/+2
sparse says: fs/ceph/ioctl.c:100:28: warning: cast to restricted __le64 preferred_osd is a __s64 so we don't need to do any conversion. Also, just remove the cast in ceph_ioctl_get_layout as it's not needed. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-07-28ceph: reduce i_nr_by_mode array sizeYan, Zheng1-2/+1
Track usage count for individual fmode bit. This can reduce the array size by half. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: rados pool namespace supportYan, Zheng1-0/+3
This patch adds codes that decode pool namespace information in cap message and request reply. Pool namespace is saved in i_layout, it will be passed to libceph when doing read/write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28libceph: define new ceph_file_layout structureYan, Zheng1-11/+11
Define new ceph_file_layout structure and rename old ceph_file_layout to ceph_file_layout_legacy. This is preparation for adding namespace to ceph_file_layout structure. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28libceph: add an ONSTACK initializer for oidsIlya Dryomov1-1/+1
An on-stack oid in ceph_ioctl_get_dataloc() is not initialized, resulting in a WARN and a NULL pointer dereference later on. We will have more of these on-stack in the future, so fix it with a convenience macro. Fixes: d30291b985d1 ("libceph: variable-sized ceph_object_id") Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph: a major OSD client updateIlya Dryomov1-4/+4
This is a major sync up, up to ~Jewel. The highlights are: - per-session request trees (vs a global per-client tree) - per-session locking (vs a global per-client rwlock) - homeless OSD session - no ad-hoc global per-client lists - support for pool quotas - foundation for watch/notify v2 support - foundation for map check (pool deletion detection) support The switchover is incomplete: lingering requests can be setup and teared down but aren't ever reestablished. This functionality is restored with the introduction of the new lingering infrastructure (ceph_osd_linger_request, linger_work, etc) in a later commit. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph: rename ceph_calc_pg_primary()Ilya Dryomov1-1/+1
Rename ceph_calc_pg_primary() to ceph_pg_to_acting_primary() to emphasise that it returns acting primary. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph: rename ceph_oloc_oid_to_pg()Ilya Dryomov1-1/+1
Rename ceph_oloc_oid_to_pg() to ceph_object_locator_to_pg(). Emphasise that returned is raw PG and return -ENOENT instead of -EIO if the pool doesn't exist. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph: variable-sized ceph_object_idIlya Dryomov1-1/+1
Currently ceph_object_id can hold object names of up to 100 (CEPH_MAX_OID_NAME_LEN) characters. This is enough for all use cases, expect one - long rbd image names: - a format 1 header is named "<imgname>.rbd" - an object that points to a format 2 header is named "rbd_id.<imgname>" We operate on these potentially long-named objects during rbd map, and, for format 1 images, during header refresh. (A format 2 header name is a small system-generated string.) Lift this 100 character limit by making ceph_object_id be able to point to an externally-allocated string. Apart from being able to work with almost arbitrarily-long named objects, this allows us to reduce the size of ceph_object_id from >100 bytes to 64 bytes. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2014-10-14ceph: fix divide-by-zero in __validate_layout()Yan, Zheng1-1/+1
The 'stripe_unit' field is 64 bits, casting it to 32 bits can result zero. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-10-14ceph: request xattrs if xattr_version is zeroYan, Zheng1-2/+2
Following sequence of events can happen. - Client releases an inode, queues cap release message. - A 'lookup' reply brings the same inode back, but the reply doesn't contain xattrs because MDS didn't receive the cap release message and thought client already has up-to-data xattrs. The fix is force sending a getattr request to MDS if xattrs_version is 0. The getattr mask is set to CEPH_STAT_CAP_XATTR, so MDS knows client does not have xattr. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-05-05Merge branch 'for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "First, there is a critical fix for the new primary-affinity function that went into -rc1. The second batch of patches from Zheng fix a range of problems with directory fragmentation, readdir, and a few odds and ends for cephfs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: reserve caps for file layout/lock MDS requests ceph: avoid releasing caps that are being used ceph: clear directory's completeness when creating file libceph: fix non-default values check in apply_primary_affinity() ceph: use fpos_cmp() to compare dentry positions ceph: check directory's completeness before emitting directory entry
2014-04-28ceph: reserve caps for file layout/lock MDS requestsYan, Zheng1-0/+3
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-04-12ceph: fix pr_fmt() redefinitionLinus Torvalds1-2/+1
The vfs merge caused a latent bug to show up: In file included from fs/ceph/super.h:4:0, from fs/ceph/ioctl.c:3: include/linux/ceph/ceph_debug.h:4:0: warning: "pr_fmt" redefined [enabled by default] #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt ^ In file included from include/linux/kernel.h:13:0, from include/linux/uio.h:12, from include/linux/socket.h:7, from include/uapi/linux/in.h:22, from include/linux/in.h:23, from fs/ceph/ioctl.c:1: include/linux/printk.h:214:0: note: this is the location of the previous definition #define pr_fmt(fmt) fmt ^ where the reason is that <linux/ceph_debug.h> is included much too late for the "pr_fmt()" define. The include of <linux/ceph_debug.h> needs to be the first include in the file, but fs/ceph/ioctl.c had for some reason missed that, and it wasn't noticeable until some unrelated header file changes brought in an indirect earlier include of <linux/kernel.h>. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03ceph: do not chain inode updates to parent fsyncSage Weil1-4/+1
The fsync(dirfd) only covers namespace operations, not inode updates. We do not need to cover setattr variants or O_TRUNC. Reported-by: Al Viro <viro@xeniv.linux.org.uk> Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-01-27libceph: replace ceph_calc_ceph_pg() with ceph_oloc_oid_to_pg()Ilya Dryomov1-2/+6
Switch ceph_calc_ceph_pg() to new oloc and oid abstractions and rename it to ceph_oloc_oid_to_pg() to make its purpose more clear. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-08-09ceph: Add check returned value on func ceph_calc_ceph_pg.majianpeng1-2/+6
Func ceph_calc_ceph_pg maybe failed.So add check for returned value. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Sage Weil <sage@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-08-09ceph: Don't forget the 'up_read(&osdc->map_sem)' if met error.majianpeng1-1/+3
CC: stable@vger.kernel.org Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-01libceph: rename ceph_calc_object_layout()Alex Elder1-2/+3
The purpose of ceph_calc_object_layout() is to fill in the pool number and seed for a ceph_pg structure provided, based on a given osd map and target object id. Currently that function takes a file layout parameter, but the only thing used out of that is its pool number. Change the function so it takes a pool number rather than the full file layout structure. Only update the ceph_pg if the pool is found in the osd map. Get rid of few useless lines of code from the function while there. Since the function now very clearly just fills in the ceph_pg structure it's provided, rename it ceph_calc_ceph_pg(). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-28Merge branch 'for-linus' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph updates from Sage Weil: "A few groups of patches here. Alex has been hard at work improving the RBD code, layout groundwork for understanding the new formats and doing layering. Most of the infrastructure is now in place for the final bits that will come with the next window. There are a few changes to the data layout. Jim Schutt's patch fixes some non-ideal CRUSH behavior, and a set of patches from me updates the client to speak a newer version of the protocol and implement an improved hashing strategy across storage nodes (when the server side supports it too). A pair of patches from Sam Lang fix the atomicity of open+create operations. Several patches from Yan, Zheng fix various mds/client issues that turned up during multi-mds torture tests. A final set of patches expose file layouts via virtual xattrs, and allow the policies to be set on directories via xattrs as well (avoiding the awkward ioctl interface and providing a consistent interface for both kernel mount and ceph-fuse users)." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (143 commits) libceph: add support for HASHPSPOOL pool flag libceph: update osd request/reply encoding libceph: calculate placement based on the internal data types ceph: update support for PGID64, PGPOOL3, OSDENC protocol features ceph: update "ceph_features.h" libceph: decode into cpu-native ceph_pg type libceph: rename ceph_pg -> ceph_pg_v1 rbd: pass length, not op for osd completions rbd: move rbd_osd_trivial_callback() libceph: use a do..while loop in con_work() libceph: use a flag to indicate a fault has occurred libceph: separate non-locked fault handling libceph: encapsulate connection backoff libceph: eliminate sparse warnings ceph: eliminate sparse warnings in fs code rbd: eliminate sparse warnings libceph: define connection flag helpers rbd: normalize dout() calls rbd: barriers are hard rbd: ignore zero-length requests ...
2013-02-26libceph: calculate placement based on the internal data typesSage Weil1-4/+1
Instead of using the old ceph_object_layout struct, update our internal ceph_calc_object_layout method to use the ceph_pg type. This allows us to pass the full 32-bit precision of the pgid.seed to the callers. It also allows some callers to avoid reaching into the request structures for the struct ceph_object_layout fields. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-02-26libceph: decode into cpu-native ceph_pg typeSage Weil1-2/+3
Always decode data into our cpu-native ceph_pg type that has the correct field widths. Limit any remaining uses of ceph_pg_v1 to dealing with the legacy protocol. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-02-26libceph: rename ceph_pg -> ceph_pg_v1Sage Weil1-1/+1
Rename the old version this type to distinguish it from the new version. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-02-22new helper: file_inode(file)Al Viro1-8/+8
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-17libceph: pass length to ceph_calc_file_object_mapping()Alex Elder1-1/+1
ceph_calc_file_object_mapping() takes (among other things) a "file" offset and length, and based on the layout, determines the object number ("bno") backing the affected portion of the file's data and the offset into that object where the desired range begins. It also computes the size that should be used for the request--either the amount requested or something less if that would exceed the end of the object. This patch changes the input length parameter in this function so it is used only for input. That is, the argument will be passed by value rather than by address, so the value provided won't get updated by the function. The value would only get updated if the length would surpass the current object, and in that case the value it got updated to would be exactly that returned in *oxlen. Only one of the two callers is affected by this change. Update ceph_calc_raw_layout() so it records any updated value. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-03ceph: return EIO on invalid layout on GET_DATALOC ioctlSage Weil1-2/+6
If the user calls GET_DATALOC on a file with an invalid (e.g., zeroed) layout, return EIO to userland. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2012-08-21ceph: avoid divide by zero in __validate_layout()Sage Weil1-1/+2
If "l->stripe_unit" is zero the the mod on the next line will cause a divide by zero bug. This comes from the copy_from_user() in ceph_ioctl_set_layout_policy(). Passing 0 is valid, though (it means "do not change") so avoid the % check in that case. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2012-05-16ceph: ignore preferred_osd fieldSage Weil1-4/+0
Old users may not expect EINVAL, and there is no clear user-visibile behavior change now that we ignore it. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2012-05-16ceph: fully initialize new layoutSage Weil1-6/+13
When we are setting a new layout, fully initialize the structure: - zero it out - always set preferred_osd to -1 Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2012-05-07ceph: refactor SETLAYOUT and SETDIRLAYOUT ioctl checks into common helperSage Weil1-44/+38
Both of these methods perform similar checks; move that code to a helper so that we can ensure the checks are consistent. Reviewed-by: Alex Elder <elder@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-05-07ceph: drop support for preferred_osd pgsSage Weil1-10/+5
This was an ill-conceived feature that has been removed from Ceph. Do this gracefully: - reject attempts to specify a preferred_osd via the ioctl - stop exposing this information via virtual xattrs - always fill in -1 for requests, in case we talk to an older server - don't calculate preferred_osd placements/pgids Reviewed-by: Alex Elder <elder@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2011-12-07ceph: use i_ceph_lock instead of i_lockSage Weil1-2/+2
We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-10-25ceph: let the set_layout ioctl set single traitsGreg Farnum1-6/+28
Previously we were validating the passed-in stripe unit, object size, and stripe count against each other (and not testing most other stuff). Instead, make sure that the composed previous layout and new values are valid, and only send the new values to the MDS. This lets users change the pool without setting the whole layout, for instance. Signed-off-by: Greg Farnum <gregory.farnum@dreamhost.com>
2011-07-26ceph: protect access to d_parentSage Weil1-1/+3
d_parent is protected by d_lock: use it when looking up a dentry's parent directory inode. Also take a reference and drop it in the caller to avoid a use-after-free. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: add F_SYNC file flag to force sync (non-O_DIRECT) ioSage Weil1-0/+11
This allows us to force IO through the sync path which you normally only get when multiple clients are reading/writing to the same file or by mounting with -o sync. Among other things, this lets test programs verify correctness with a single mount. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-06-07ceph: use ihold when we already have an inode refSage Weil1-2/+4
We should use ihold whenever we already have a stable inode ref, even when we aren't holding i_lock. This avoids adding new and unnecessary locking dependencies. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20ceph: add CEPH_MDS_OP_SETDIRLAYOUT and associated ioctl.Greg Farnum1-0/+66
Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20ceph: factor out libceph from Ceph file systemYehuda Sadeh1-4/+7
This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-01ceph: add LAZYIO ioctl to mark a file description for lazy consistencySage Weil1-0/+24
Allow an application to mark a file descriptor for lazy file consistency semantics, allowing buffered reads and writes when multiple clients are accessing the same file. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17ceph: use ceph_sb_to_client instead of ceph_clientCheng Renquan1-1/+1
ceph_sb_to_client and ceph_client are really identical, we need to dump one; while function ceph_client is confusing with "struct ceph_client", ceph_sb_to_client's definition is more clear; so we'd better switch all call to ceph_sb_to_client. -static inline struct ceph_client *ceph_client(struct super_block *sb) -{ - return sb->s_fs_info; -} Signed-off-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-03ceph: allow preferred osd to be get/set via layout ioctlSage Weil1-1/+4
There is certainly no reason not to report this. The only real downside to allowing the user to set it is that you don't get default values by zeroing the layout struct (the default is -1). Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-04ceph: fix endian conversions for ceph_pgSage Weil1-2/+2
The endian conversions don't quite work with the old union ceph_pg. Just make it a regular struct, and make each field __le. This is simpler and it has the added bonus of actually working. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06ceph: ioctlsSage Weil1-0/+157
A few Ceph ioctls for getting and setting file layout (striping) parameters, and learning the identity and network address of the OSD a given region of a file is stored on. Signed-off-by: Sage Weil <sage@newdream.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 17:45:11 +0000