summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2008-04-24USB: enable USB-PERSIST by defaultAlan Stern1-2/+4
This patch (as1052) enables USB-PERSIST for all devices by default. The user won't have to remember to enable it explicitly for devices containing mounted filesystems. Eventually userspace tools like hal may be able to set the persist attribute automatically when a filesystem is mounted on a USB device. When that time comes this patch can be reverted, if people think it matters. This approach has the advantage of giving the user the ability to turn off USB-PERSIST for devices with mounted filesystems, rather than making the kernel always assume it should be on. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: check serial-number string after device resetAlan Stern2-16/+51
This patch (as1048) extends the descriptor checking after a device is reset. Now the SerialNumber string descriptor is compared to its old value, in addition to the device and configuration descriptors. As a consequence, the kmalloc() call in usb_string() is now on the error-handling pathway for usb-storage. Hence its allocation type is changed to GFO_NOIO. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: remove CONFIG_USB_PERSIST settingAlan Stern5-64/+33
This patch (as1047) removes the USB_PERSIST Kconfig option, enabling it permanently. It also prevents the power/persist attribute from being created for hub devices; there's no point in having it since USB-PERSIST is always turned on for hubs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: make USB-PERSIST work after every system sleepAlan Stern1-34/+80
This patch (as1046) makes USB-PERSIST work more in accordance with the documentation. Currently it takes effect only in cases where the root hub has lost power or been reset, but it is supposed to operate whenever a power session was dropped during a system sleep. A new hub_restart() routine carries out the duties required during a reset or a reset-resume. It checks to see whether occupied ports are still enabled, and if they aren't then it clears the enable-change and connect-change features (to prevent interference by khubd) and sets the child device's reset_resume flag. It also checks ports that are supposed to be unoccupied to verify that the firmware hasn't left the port in an enabled state. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: reorganize code in hub.cAlan Stern1-26/+32
This patch (as1045) reorganizes some code in the hub driver. hub_port_status() is moved earlier in the file, and a new hub_stop() routine is created to do the work currently in hub_preset() (i.e., disconnect all child devices and quiesce the hub). There are no functional changes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: EHCI: carry out port handover during each root-hub resumeAlan Stern4-6/+14
This patch (as1044) causes EHCI port handover for non-high-speed devices to occur during every root-hub resume, not just in cases where the controller lost power or was reset. This is necessary because: When some machines go into suspend, they remove power from on-board USB devices while retaining suspend current for USB controllers. The user might well unplug a USB device while the system is suspended and then plug it back in before resuming. A corresponding change is made to the core resume routine; now high-speed root hubs will always be resumed when the system wakes up, even if they were suspended before the system went to sleep. If this weren't done then EHCI port handover wouldn't work, since it is called when the EHCI root hub is resumed. Finally, a comment is added to the hub driver explaining the khubd has to be freezable; if it weren't frozen then it could interfere with port handover. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: Add HP hs2300 Broadband Wireless Module to sierra.cStefan Seyfried1-0/+1
Add the HP hs2300 Broadband Wireless Module (relabeled MC8775) USB IDs Signed-off-by: Stefan Seyfried <seife@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: Fix memory leak in mon_stat_releaseMing Lei1-0/+3
Fix the leak of the snap structure allocated in mon_stat_open(). Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: CP2101 Add new device IDsCraig Shelley1-0/+3
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24Merge branch 'for-linus' of ↵Linus Torvalds1-18/+17
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes: "make namespacecheck" fixes x86: fix compilation error in VisWS x86: voyager fix x86: Drop duplicate from setup.c intel-iommu.c: dma ops fix
2008-04-24intel-iommu.c: dma ops fixIngo Molnar1-18/+17
Stephen Rothwell noticed that: Commit 2be621498d461b63ca6124f86e3b9582e1a8e722 ("x86: dma-ops on highmem fix") in Linus' tree introduced a new warning (noticed in the x86_64 allmodconfig build of linux-next): drivers/pci/intel-iommu.c:2240: warning: initialization from incompatible pointer type Which points at an instance of map_single that needs updating. Fix it to the new prototype. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds408-7330/+24793
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (452 commits) V4L/DVB (7731): tuner-xc2028: fix signal strength calculus V4L/DVB (7730): tuner-xc2028: Fix SCODE load for MTS firmwares V4L/DVB (7729): Fix VIDIOCGAP corruption in ivtv V4L/DVB (7728): tea5761: bugzilla #10462: tea5761 autodetection code were broken V4L/DVB (7726): cx23885: Enable cx23417 support on the HVR1800 V4L/DVB (7725): cx23885: Add generic cx23417 hardware encoder support V4L/DVB (7723): pvrusb2: Clean up input selection list generation in V4L interface V4L/DVB (7722): pvrusb2: Implement FM radio support for Gotview USB2.0 DVD 2 V4L/DVB (7721): pvrusb2: Restructure cx23416 firmware loading to have a common exit point V4L/DVB (7720): pvrusb2: Fix bad error code on cx23416 firmware load failure V4L/DVB (7719): pvrusb2: Implement input selection enforcement V4L/DVB (7718): pvrusb2-dvb: update Kbuild selections V4L/DVB (7717): pvrusb2-dvb: add DVB-T support for Hauppauge pvrusb2 model 73xxx V4L/DVB (7716): pvrusb2: clean up global functions V4L/DVB (7715): pvrusb2: Clean out all use of __FUNCTION__ V4L/DVB (7714): pvrusb2: Fix hang on module removal V4L/DVB (7713): pvrusb2: Implement cleaner DVB kernel thread shutdown V4L/DVB (7712): pvrusb2: Close connect/disconnect race V4L/DVB (7711): pvrusb2: Fix race on module unload V4L/DVB (7710): pvrusb2: Implement critical digital streaming quirk for onair devices ...
2008-04-24V4L/DVB (7731): tuner-xc2028: fix signal strength calculusMauro Carvalho Chehab1-3/+10
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7730): tuner-xc2028: Fix SCODE load for MTS firmwaresMauro Carvalho Chehab1-1/+6
There are different tables for MTS firmwares. This should be taken into account while selecting the proper firmware. While at tuner-xc2028.h, improve some comments. Thanks to Edward J. Sheldrake <ejs1920@yahoo.co.uk> for helping to diagnose such troubles with PAL/I standard. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7729): Fix VIDIOCGAP corruption in ivtvAlan Cox1-1/+2
Frank Bennett reported that ivtv was causing skype to crash. With help from one of their developers he showed it was a kernel problem. VIDIOCGCAP copies a name into a fixed length buffer - ivtv uses names that are too long and does not truncate them so corrupts a few bytes of the app data area. Possibly the names also want trimming but for now this should fix the corruption case. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7728): tea5761: bugzilla #10462: tea5761 autodetection code were brokenMauro Carvalho Chehab2-8/+13
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7726): cx23885: Enable cx23417 support on the HVR1800Steven Toth4-2/+89
cx23885: Enable cx23417 support on the HVR1800 Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7725): cx23885: Add generic cx23417 hardware encoder supportSteven Toth4-31/+1921
cx23885: Add generic cx23417 hardware encoder support. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7723): pvrusb2: Clean up input selection list generation in V4L ↵Mike Isely1-32/+37
interface Change how list of possible pvrusb2 inputs is generated to include only those interfaces that make sense for the interface instance. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7722): pvrusb2: Implement FM radio support for Gotview USB2.0 DVD 2Mike Isely3-1/+31
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7721): pvrusb2: Restructure cx23416 firmware loading to have a ↵Mike Isely1-4/+8
common exit point Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7720): pvrusb2: Fix bad error code on cx23416 firmware load failureMike Isely1-1/+1
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7719): pvrusb2: Implement input selection enforcementMike Isely7-74/+246
In the pvrusb2 driver, different interfaces (e.g. V4L, DVB) have Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7718): pvrusb2-dvb: update Kbuild selectionsMichael Krufky1-0/+6
These changes are required with the addition of digital television support for the Hauppauge HVR1900 & HVR1950, the OnAir Creator and Sasem USB HDTV Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7717): pvrusb2-dvb: add DVB-T support for Hauppauge pvrusb2 model 73xxxMichael Krufky1-4/+48
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7716): pvrusb2: clean up global functionsAdrian Bunk2-50/+1
This patch contains the following cleanups: - make the following needlessly global function static: - pvr2_hdw_set_cur_freq() - #if 0 the following unused global functions: - pvr2_hdw_get_state_name() - pvr2_hdw_get_debug_info_unlocked() - pvr2_hdw_get_debug_info_locked() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7715): pvrusb2: Clean out all use of __FUNCTION__Mike Isely1-20/+29
Apparently the kernel developers no longer consider it proper etiquette to use __FUNCTION__; everyone must instead use __func__ (even though it breaks with older compilers). And worse still, actual effort is being expended to sweep this change throughout the kernel source tree. Don't these people have better things to do? So... Completely clean out all use of __FUNCTION__ from the pvrusb2 driver (it was just in the sysfs interface). I'm not going to use __func__ either. So there. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7714): pvrusb2: Fix hang on module removalMike Isely1-1/+18
The pvrusb2 driver was getting had by this scenario: 1. Task A calls kthread_stop() for task B. 2. Before exiting, then Task B calls kthread_stop() for task C. The problem is, kthread_stop() wants to allocate an internal resource to itself (i.e. acquire a lock), which won't be released until kthread_stop() returns. But kthread_stop() won't return until task B is dead. But task B won't die until it finishes its call to kthread_stop() for task C, and that will block waiting on the resource already allocated inside task A. Deadlock. With the pvrusb2 driver, task A is the caller to pvr_exit(), task B is the control thread run inside of pvrusb2-context.c, and task C is any worker thread run inside of pvrusb2-hdw.c. This problem got introduced by the previous threading setup change, which was itself an attempt to fix a module tear-down race (which it actually did fix). The lesson here is that a task being waited on as part of a kthread_stop() simply cannot be allow to also issue a kthread_stop() - or we make sure not to issue the enclosing kthread_stop() until we know that the inner kthread_stop() has completed first. The solution for the pvrusb2 driver is some hackish code which changes the main control thread tear down into a two step process. This then makes it possible to delay issuing the kthread_stop() on the control thread until after we know that everything has been torn down first. (And yes, we really need that kthread_stop() because it's the only way to safely guarantee that a module-referencing kernel thread has safely returned back out of the module before we finally remove the module.) Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7713): pvrusb2: Implement cleaner DVB kernel thread shutdownMike Isely2-6/+1
Earlier fix to handle DVB feed thread aborts was overly-aggressive. We can take better advantage of what kthread_stop() can do. This change simplifies things. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7712): pvrusb2: Close connect/disconnect raceMike Isely1-1/+10
If a disconnect happens before initialization is completed, the pvrusb2 driver can accidentally touch dangling pointers. The whole initialization function must be protected by the big_lock, and once inside that lock, the initialization function should abort if it is discovered that a disconnect has already taken place. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7711): pvrusb2: Fix race on module unloadMike Isely3-51/+174
The pvrusb2 driver - for basically forever - was not enforcing a proper module tear-down. Kernel threads are used inside the driver and all must be gone before the module can be safely removed. This changeset reimplements a chunk of pvrusb2-context.c to enforce this correctly. Unfortunately this is not a simple fix. The new implementation also cuts back on kernel thread usage; instead of there being 1 control thread per instance now it's just 1 control thread shared by all instances. (By dropping to a single thread then the module exit function can block on its shutdown and the thread itself can monitor and cleanly shut down all of the other instances first.) Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7710): pvrusb2: Implement critical digital streaming quirk for ↵Mike Isely3-7/+156
onair devices Implement timed measurement of encoder operation for the first time it is run. This allows the driver to note when the encoder has been run successfully for at least 1/4 second. On top of that implement various bits to ensure that the encoder has been run once before digital streaming for OnAir devices. This is done via several core state machine tweaks. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7709): pvrusb2: New device attribute for encoder usage in digital modeMike Isely3-9/+33
Some tuners seem to not work in digital mode unless the encoder is healthy. Implement a device attribute to represent this flag and modify the core state machines to enforce this requirement. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7708): pvrusb2-dvb: Fix stuck thread on streaming abortMike Isely2-2/+9
If the device fails to stream, the feed thread will block forever waiting for buffers. But while in this state it was not looking for an exit condition from the driver DVB interface. This caused the thread to jam. Implement a new stop flag (which will be set appropriately) to tell the thread to stop. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7707): pvrusb2-dvb: add atsc/qam support for Hauppauge pvrusb2 ↵Michael Krufky1-0/+60
model 750xx Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7706): pvrusb2: create a separate pvr2_device_desc structure for ↵Michael Krufky1-5/+23
751xx models Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7705): pvrusb2: Enable OnAir digital operationMichael Krufky1-1/+74
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7704): pvrusb2: Fix slop involving use of struct which might not be ↵Mike Isely1-0/+2
defined When the DVB interface is not compiled, the pvr2_dvb_props struct is not available - so it really should be ifdef'ed out as well. This didn't cause an error because in this context its usage was as an opaque pointer. But it really shouldn't be present at all if DVB is not enabled. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7703): pvrusb2: Fix minor problem involving ARRAY_SIZE confusionMike Isely1-2/+2
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7702): pvrusb2: Rework USB streaming start/stop executionMike Isely1-15/+37
The commands to start / stop USB streaming for an analog device are fairly standard, owing to the fact that all supported devices apparently started from the same common reference design. However with digital mode, the commands seem to vary by vendor. This change makes that variance more explicit. It also cleans up a related problem for OnAir devices which prevented digital mode from working at all. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7701): pvrusb2: Centralize handling of simple FX2 commandsMike Isely1-82/+116
Numerous places in the driver need to issue simple commands to the FX2 microcontroller (e.g. only 1 or 2 bytes, no reply needed). Previously each place that did this, had to take lock, set up a central buffer, and call the function to perform the handshake. This change puts these steps into a single spot. This also has the effect of removing the need to mess with the control lock from numerous places in the code. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7700): pvrusb2: Make FX2 command codes unsigned constantsMike Isely1-24/+24
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7699): pvrusb2: Implement statistics for USB I/O performance / trackingMike Isely4-0/+84
Implement a mechanism in the pvrusb2 driver for gathering statistics on the stream buffering, including bytes transferred, buffers handled, buffers in flight, etc. This is useful for debugging certain classes of streaming issues and for determining if the buffer pool size is generally correct for the driver. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7698): pvrusb2: Remove never-reached break statements (trivial)Mike Isely1-2/+0
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7697): pvrusb2: Fix misleading bit of debug output (trivial)Mike Isely1-1/+1
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7696): pvrusb2: state control tweakMike Isely1-1/+1
Don't trigger a pathway state change if it's already been triggered (eliminates some wasted processing and some debug output noise) Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7695): pvrusb2: Make associativity of == and && explicit (cosmetic)Mike Isely1-2/+2
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7694): pvrusb2: Fix compilation goof when CONFIG_VIDEO_PVRUSB2_DVB ↵Mike Isely1-0/+2
is off Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7693): pvrusb2-dvb: Change usage of 0 --> NULLMike Isely1-1/+1
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7692): pvrusb2-dvb: Further clean up dvb init/tear-downMike Isely4-14/+13
Move pvr2_dvb_adapter usage out of the pvrusb2 driver core - it's really private to the pvrusb2-dvb module and nothing outside of the dvb implementation should care about it. Creation / destruction of the pvr2_dvb_adapter instance is now contained entirely within pvrusb2-dvb.c. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 01:32:20 +0000