summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-06-04of/fdt: fix argument name and add comments of unflatten_dt_node()Masahiro Yamada1-1/+4
Match the name of the third argument in the comment block to the actual function: p -> poffset Add missing comments about the arguments "nodepp" and "dryrun". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2015-06-04of: return NUMA_NO_NODE from fallback of_node_to_nid()Konstantin Khlebnikov1-1/+1
Node 0 might be offline as well as any other numa node, in this case kernel cannot handle memory allocation and crashes. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 0c3f061c195c ("of: implement of_node_to_nid as a weak function") Signed-off-by: Grant Likely <grant.likely@linaro.org>
2015-05-24Merge tag 'scsi-fixes' of ↵Linus Torvalds12-72/+63
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of five fixes: Two MAINTAINER email updates (urgent because the non-avagotech emails will start bouncing) an lpfc big endian oops fix, a 256 byte sector hang fix (to eliminate 256 byte sectors) and a storvsc fix which could cause test unit ready failures on bringup" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: MAINTAINERS: Revise lpfc maintainers for Avago Technologies ownership of Emulex MAINTAINERS, be2iscsi: change email domain sd: Disable support for 256 byte/sector disks lpfc: Fix breakage on big endian kernels storvsc: Set the SRB flags correctly when no data transfer is needed
2015-05-23Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irqchip fix from Thomas Gleixner: "A fix for a GIC-V3 irqchip regression which prevents some systems from booting" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gicv3-its: ITS table size should not be smaller than PSZ
2015-05-22Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds30-240/+190
Pull drm fixes from Dave Airlie: "Radeon has two displayport fixes, one for a regression. i915 regression flicker fix needed so 4.0 can get fixed. A bunch of msm fixes and a bunch of exynos fixes, these two are probably a bit larger than I'd like, but most of them seems pretty good" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (29 commits) drm/radeon: fix error flag checking in native aux path drm/radeon: retry dcpd fetch drm/msm/mdp5: fix incorrect parameter for msm_framebuffer_iova() drm/exynos: dp: Lower level of EDID read success message drm/exynos: cleanup exynos_drm_plane drm/exynos: 'win' is always unsigned drm/exynos: mixer: don't dump registers under spinlock drm/exynos: Consolidate return statements in fimd_bind() drm/exynos: Constify exynos_drm_crtc_ops drm/exynos: Fix build breakage on !DRM_EXYNOS_FIMD drm/exynos: mixer: Constify platform_device_id drm/exynos: mixer: cleanup pixelformat handling drm/exynos: mixer: also allow NV21 for the video processor drm/exynos: mixer: remove buffer count handling in vp_video_buffer() drm/exynos: plane: honor buffer offset for dma_addr drm/exynos: fb: use drm_format_num_planes to get buffer count drm/i915: fix screen flickering drm/msm: fix locking inconsistencies in gpu->destroy() drm/msm/dsi: Simplify the code to get the number of read byte drm/msm: Attach assigned encoder to eDP and DSI connectors ...
2015-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds10-25/+57
Pull networking fixes from David Miller: 1) Don't leak ipvs->sysctl_tbl, from Tommi Rentala. 2) Fix neighbour table entry leak in rocker driver, from Ying Xue. 3) Do not emit bonding notifications for unregistered interfaces, from Nicolas Dichtel. 4) Set ipv6 flow label properly when in TIME_WAIT state, from Florent Fourcot. 5) Fix regression in ipv6 multicast filter test, from Henning Rogge. 6) do_replace() in various footables netfilter modules is missing a check for 0 counters in the datastructure provided by the user. Fix from Dave Jones, and found with trinity. 7) Fix RCU bug in packet scheduler classifier module unloads, from Daniel Borkmann. 8) Avoid deadlock in tcp_get_info() by using u64_sync. From Eric Dumzaet. 9) Input packet processing can race with inetdev_destroy() teardown, fix potential OOPS in ip_error() by explicitly testing whether the inetdev is still attached. From Eric W Biederman. 10) MLDv2 parser in bridge multicast code breaks too early while parsing. Fix from Thadeu Lima de Souza Cascardo. 11) Asking for settings on non-zero PHYID doesn't work because we do not import the command structure from the user and use the PHYID provided there. Fix from Arun Parameswaran. 12) Fix UDP checksums with IPV6 RAW sockets, from Vlad Yasevich. 13) Missing NF_TABLES depends for TPROXY etc can cause build failures, fix from Florian Westphal. 14) Fix netfilter conntrack to handle RFC5961 challenge ACKs properly, from Jesper Dangaard Brouer. 15) If netlink autobind retry fails, we have to reset the sockets portid back to zero. From Herbert Xu. 16) VXLAN netns exit code unregisters using wrong device, from John W Linville. 17) Add some USB device IDs to ath3k and btusb bluetooth drivers, from Dmitry Tunin and Wen-chien Jesse Sung. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) bridge: fix lockdep splat net: core: 'ethtool' issue with querying phy settings bridge: fix parsing of MLDv2 reports ARM: zynq: DT: Use the zynq binding with macb net: macb: Disable half duplex gigabit on Zynq net: macb: Document zynq gem dt binding ipv4: fill in table id when replacing a route cdc_ncm: Fix tx_bytes statistics ipv4: Avoid crashing in ip_error tcp: fix a potential deadlock in tcp_get_info() net: sched: fix call_rcu() race on classifier module unloads net: phy: Make sure phy_start() always re-enables the phy interrupts ipv6: fix ECMP route replacement ipv6: do not delete previously existing ECMP routes if add fails Revert "netfilter: bridge: query conntrack about skb dnat" netfilter: ensure number of counters is >0 in do_replace() netfilter: nfnetlink_{log,queue}: Register pernet in first place tcp: don't over-send F-RTO probes tcp: only undo on partial ACKs in CA_Loss net/ipv6/udp: Fix ipv6 multicast socket filter regression ...
2015-05-22Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+2
Pull block fixes from Jens Axboe: "Three small fixes that have been picked up the last few weeks. Specifically: - Fix a memory corruption issue in NVMe with malignant user constructed request. From Christoph. - Kill (now) unused blk_queue_bio(), dm was changed to not need this anymore. From Mike Snitzer. - Always use blk_schedule_flush_plug() from the io_schedule() path when flushing a plug, fixing a !TASK_RUNNING warning with md. From Shaohua" * 'for-linus' of git://git.kernel.dk/linux-block: sched: always use blk_schedule_flush_plug in io_schedule_out nvme: fix kernel memory corruption with short INQUIRY buffers block: remove export for blk_queue_bio
2015-05-22Merge tag 'md/4.1-rc4-fixes' of git://neil.brown.name/mdLinus Torvalds3-3/+10
Pull md bugfixes from Neil Brown: "I have a few more raid5 bugfixes pending, but I want them to get a bit more review first. In the meantime: - one serious RAID0 data corruption - caused by recent bugfix that wasn't reviewed properly. - one raid5 fix in new code (a couple more of those to come). - one little fix to stop static analysis complaining about silly rcu annotation" * tag 'md/4.1-rc4-fixes' of git://neil.brown.name/md: md/bitmap: remove rcu annotation from pointer arithmetic. md/raid0: fix restore to sector variable in raid0_make_request raid5: fix broken async operation chain
2015-05-22Merge branch 'for-linus' of ↵Linus Torvalds6-4/+70
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Updates for the input subsystem. The main change is that we tell joydev not to touch "absolute mice", such as VMware virtual mouse, as that produced bad result (cursor stuck in upper right corner) with games" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: smtpe-ts - wait 50mS until polling for pen-up Input: smtpe-ts - use msecs_to_jiffies() instead of HZ Input: joydev - don't classify the vmmouse as a joystick Input: vmmouse - do not reference non-existing version of X driver Input: alps - fix finger jumps on lifting 2 fingers on v7 touchpad Input: elantech - fix semi-mt protocol for v3 HW Input: sx8654 - fix memory allocation check
2015-05-22net: macb: Disable half duplex gigabit on ZynqNathan Sullivan2-0/+13
According to the Zynq TRM, gigabit half duplex is not supported. Add a new cap and compatible string so Zynq can avoid advertising that mode. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22cdc_ncm: Fix tx_bytes statisticsBjørn Mork1-1/+1
The tx_curr_frame_payload field is u32. When we try to calculate a small negative delta based on it, we end up with a positive integer close to 2^32 instead. So the tx_bytes pointer increases by about 2^32 for every transmitted frame. Fix by calculating the delta as a signed long. Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Reported-by: Florian Bruhin <me@the-compiler.org> Fixes: 7a1e890e2168 ("usbnet: Fix tx_bytes statistic running backward in cdc_ncm") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22Merge branch 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie2-11/+11
into drm-fixes Just two small DP fixes for 4.1 * 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix error flag checking in native aux path drm/radeon: retry dcpd fetch
2015-05-22Merge tag 'drm-intel-fixes-2015-05-21' of ↵Dave Airlie1-13/+11
git://anongit.freedesktop.org/drm-intel into drm-fixes There's a stable backport from Ander [1] that combines this and a few other commits to fix the flickering on v4.0, reported in [2] among others. Having this upstream is obviously a requirement for stable. * tag 'drm-intel-fixes-2015-05-21' of git://anongit.freedesktop.org/drm-intel: drm/i915: fix screen flickering
2015-05-21Merge tag 'for-linus-4.1b-rc4-tag' of ↵Linus Torvalds2-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull two xen bugfixes from David Vrabel: - fix ARM build regression. - fix VIRQ_CONSOLE related oops. * tag 'for-linus-4.1b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: don't bind non-percpu VIRQs with percpu chip xen/arm: Define xen_arch_suspend()
2015-05-21Merge branch 'for-linus' of ↵Linus Torvalds1-11/+9
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Bug fixes. Three for our crypto code, two for eBPF, and one memory management fix to get machines with memory > 8TB working" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: correct return value of pmd_pfn s390/crypto: fix stckf loop s390/zcrypt: Fix invalid domain handling during ap module unload s390/bpf: Fix gcov stack space problem s390/zcrypt: fixed ap poll timer behavior s390/bpf: Adjust ALU64_DIV/MOD to match interpreter change
2015-05-21Merge branch 'for-rc' of ↵Linus Torvalds5-7/+89
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal fixes from Zhang Rui: "Three fixes for Armada (380) and TI (dra7 and OMAP5) thermal soc drivers" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: armada: Update Armada 380 thermal sensor coefficients thermal: ti-soc-thermal: OMAP5: Implement Workaround for Errata i813 thermal: ti-soc-thermal: dra7: Implement Workaround for Errata i814
2015-05-21Merge tag 'for-linus' of ↵Linus Torvalds7-53/+101
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull infiniband/rdma fixes from Doug Ledford: "This should hopefully be the last request for 4.1-rc for the RDMA stack. It contains some late ocrdma fixes that I'm including because they are small and self contained. It also contains two bug fixes that are simple and easily verified. Summary: - a number of small, well contained bug fixes for ocrdma driver - a simple fix for the connection negotiation sequence on IB - fix for broken AF_IB address on UD queue pair support" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/cma: Fix broken AF_IB UD support ib/cm: Change reject message type when destroying cm_id RDMA/ocrdma: Update ocrdma version number RDMA/ocrdma: Fail connection for MTU lesser than 512 RDMA/ocrdma: Fix dmac resolution for link local address RDMA/ocrdma: Prevent allocation of DPP PDs if FW doesnt support it RDMA/ocrdma: Fix the request length for RDMA_QUERY_QP mailbox command to FW. RDMA/ocrdma: Use VID 0 if PFC is enabled and vlan is not configured RDMA/ocrdma: Fix QP state transition in destroy_qp RDMA/ocrdma: Report EQ full fatal error RDMA/ocrdma: Fix EQ destroy failure during driver unload
2015-05-21Merge tag 'mmc-4.1-rc3' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds1-2/+7
Pull MMC fix from Ulf Hansson: "One more mmc fix intended for v4.1 rc5: MMC host: - atmel-mci: fix bad variable type for clkdiv" * tag 'mmc-4.1-rc3' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: atmel-mci: fix bad variable type for clkdiv
2015-05-21Merge branch 'for-linus' of ↵Linus Torvalds6-24/+19
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: "Bugfixes for HID subsystem that should go in 4.1. Important highlights: - the patch that extended support for HID++ protocol for TK820 touchpad turns out to be causing regressions due to firmware issues; patch reverting back to basic support from Benjamin Tissoires - Wacom driver can oops for devices that report non-touch data on touch interfaces. Fix from Ping Cheng - gpiolib is not mandatory for i2c-hid, so the driver shouldn't fail if gpiolib is not enabled. Fix from Mika Westerberg" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: fix an Oops caused by wacom_wac_finger_count_touches HID: usbhid: Add HID_QUIRK_NOGET for Aten DVI KVM switch HID: hid-sensor-hub: Fix debug lock warning Revert "HID: logitech-hidpp: support combo keyboard touchpad TK820" HID: i2c-hid: Do not fail probing if gpiolib is not enabled
2015-05-21Input: smtpe-ts - wait 50mS until polling for pen-upMarek Vasut1-1/+1
Wait a little bit longer, 50mS instead of 20mS, until the driver starts polling for pen-up. The problematic behavior before this patch is applied is as follows. The behavior was observed on the STMPE610QTR controller. Upon a physical pen-down event, the touchscreen reports one set of x-y-p coordinates and a pen-down event. After that, the pen-up polling is triggered and since the controller is not ready yet, the polling mistakenly detects a pen-up event while the physical state is still such that the pen is down on the touch surface. The pen-up handling flushes the controller FIFO, so after that, all the samples in the controller are discarded. The controller becomes ready shortly after this bogus pen-up handling and does generate again a pen-down interrupt. This time, the controller contains x-y-p samples which all read as zero. Since pressure value is zero, this set of samples is effectively ignored by userland. In the end, the driver just bounces between pen-down and bogus pen-up handling, generating no useful results. Fix this by giving the controller a bit more time before polling it for pen-up. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-21Input: smtpe-ts - use msecs_to_jiffies() instead of HZMarek Vasut1-1/+1
Use msecs_to_jiffies(20) instead of plain (HZ / 50), as the former is much more explicit about it's behavior. We want to schedule the task 20 mS from now, so make it explicit in the code. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-21Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds6-27/+63
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Michael Turquette: "The first set of clk fixes for 4.1 are all driver bugs, with the exception of a single locking fix in the core code. All driver fixes are for code that was merged recently. The Samsung stuff is mostly fixes around suspend/resume, the Qualcomm fixes are for invalid hardware configuration data and the Silicon Labs patches are fixes following their move away from platform_data to Device Tree" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: si5351: Do not pass struct clk in platform_data clk: si5351: Mention clock-names in the binding documentation clk: add missing lock when call clk_core_enable in clk_set_parent clk: exynos5420: Restore GATE_BUS_TOP on suspend clk: qcom: Fix MSM8916 gfx3d_clk_src configuration clk: qcom: Fix MSM8916 venus divider value clk: exynos5433: Fix wrong PMS value of exynos5433_pll_rates clk: exynos5433: Fix wrong parent clock of sclk_apollo clock clk: exynos5433: Fix CLK_PCLK_MONOTONIC_CNT clk register assignment clk: exynos5433: Fix wrong offset of PCLK_MSCL_SECURE_SMMU_JPEG clk: Use CONFIG_ARCH_EXYNOS instead of CONFIG_ARCH_EXYNOS5433
2015-05-21Input: joydev - don't classify the vmmouse as a joystickThomas Hellstrom1-0/+61
Joydev is currently thinking some absolute mice are joystick, and that messes up games in VMware guests, as the cursor typically gets stuck in the top left corner. Try to detect the event signature of a VMmouse input device and back off for such devices. We're still incorrectly detecting, for example, the VMware absolute USB mouse as a joystick, but adding an event signature matching also that device would be considerably more risky, so defer that to a later merge window. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-21drm/radeon: fix error flag checking in native aux pathAlex Deucher1-2/+0
That atom table does not check these bits. Fixes aux regressions on some boards. Reported-by: Malte Schröder <malte@tnxip.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-05-21drm/radeon: retry dcpd fetchAlex Deucher1-9/+11
Retry the dpcd fetch several times. Some eDP panels fail several times before the fetch is successful. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73530 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-05-21drm/msm/mdp5: fix incorrect parameter for msm_framebuffer_iova()Stephane Viau1-1/+1
The index of ->planes[] array (3rd parameter) cannot be equal to MAX_PLANE. This looks like a typo that is now fixed. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-05-21md/bitmap: remove rcu annotation from pointer arithmetic.NeilBrown1-1/+6
Evaluating "&mddev->disks" is simple pointer arithmetic, so it does not need 'rcu' annotations - no dereferencing is happening. Also enhance the comment to explain that 'rdev' in that case is not actually a pointer to an rdev. Reported-by: Patrick Marlier <patrick.marlier@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-05-21md/raid0: fix restore to sector variable in raid0_make_requestEric Work1-1/+3
The variable "sector" in "raid0_make_request()" was improperly updated by a call to "sector_div()" which modifies its first argument in place. Commit 47d68979cc968535cb87f3e5f2e6a3533ea48fbd restored this variable after the call for later re-use. Unfortunetly the restore was done after the referenced variable "bio" was advanced. This lead to the original value and the restored value being different. Here we move this line to the proper place. One observed side effect of this bug was discarding a file though unlinking would cause an unrelated file's contents to be discarded. Signed-off-by: NeilBrown <neilb@suse.de> Fixes: 47d68979cc96 ("md/raid0: fix bug with chunksize not a power of 2.") Cc: stable@vger.kernel.org (any that received above backport) URL: https://bugzilla.kernel.org/show_bug.cgi?id=98501
2015-05-21raid5: fix broken async operation chainShaohua Li1-1/+1
ops_run_reconstruct6() doesn't correctly chain asyn operations. The tx returned by async_gen_syndrome should be added as the dependent tx of next stripe. The issue is introduced by commit 59fc630b8b5f9f21c8ce3ba153341c107dce1b0c RAID5: batch adjacent full stripe write Reported-and-tested-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-05-20Input: vmmouse - do not reference non-existing version of X driverThomas Hellstrom1-1/+1
The vmmouse Kconfig help text was referring to an incorrect user-space driver version. Fix this. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20Input: alps - fix finger jumps on lifting 2 fingers on v7 touchpadHans de Goede1-0/+5
On v7 touchpads sometimes when 2 fingers are moved down on the touchpad until they "fall of" the touchpad, the second touch will report 0 for y (max y really since the y axis is inverted) and max x as coordinates, rather then reporting 0, 0 as is expected for a non touching finger. This commit detects this and treats these touches as non touching. See the evemu-recording here: https://bugzilla.redhat.com/attachment.cgi?id=1025058 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1221200 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20IB/cma: Fix broken AF_IB UD supportMatthew Finlay1-11/+21
Support for using UD and AF_IB is currently broken. The IB_CM_SIDR_REQ_RECEIVED message is not handled properly in cma_save_net_info() and we end up falling into code that will try and process the request as ipv4/ipv6, which will end up failing. The resolution is to add a check for the SIDR_REQ and call cma_save_ib_info() with a NULL path record. Change cma_save_ib_info() to copy the src sib info from the listen_id when the path record is NULL. Reported-by: Hari Shankar <Hari.Shankar@netapp.com> Signed-off-by: Matt Finlay <matt@mellanox.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-20irqchip/gicv3-its: ITS table size should not be smaller than PSZMinghuan Lian1-1/+8
When allocating a device table, if the requested allocation is smaller than the default granule size of the ITS then, we need to round up to the default size. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> [ stuart: Added comments and massaged changelog ] Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Reviewed-by: Marc Zygnier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1432134795-661-1-git-send-email-stuart.yoder@freescale.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-20ib/cm: Change reject message type when destroying cm_idTed Kim1-1/+1
Problem reported by: Ted Kim <ted.h.kim@oracle.com>: We have a case where a Linux system and a non-Linux system are trying to interoperate. The Linux host is the active side and starts the connection establishment, but later decides to not go through with the connection setup and does rdma_destroy_id(). The rdma_destroy_id() eventually works its way down to cm_destroy_id() in core/cm.c, where a REJ is sent. The non-Linux system has some trouble recognizing the REJ because of: A. CM states which can't receive the REJ B. Some issues about REJ formatting (missing comm ID) ISSUE A: That part of the spec says, a Consumer Reject REJ can be sent for a connection abort, but it goes further and says: can send a REJ message with a "Consumer Reject" Reason code if they are in a CM state (i.e. REP Rcvd, MRA(REP) Sent, REQ Rcvd, MRA Sent) that allows a REJ to be sent (lines 35-38). Of the states listed there in that sentence, it would seem to limit the active side to using the Consumer Reject (for the abort case) in just the REP-Rcvd and MRA-REP-Sent states. That is basically only after the active side sees a REP (or alternatively goes down the state transitions to timeout in which case a Timeout REJ is sent). As a fix, in cm-destroy-id() move the IB-CM-MRA-REQ-RCVD case to the same as REQ-SENT. Essentially, make a REJ sent after getting an MRA on active side a timeout rather than Consumer- Reject, which is arguably more correct with the CM state diagrams previous to getting a REP. Signed-off-by: Ted Kim <ted.h.kim@oracle.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2015-05-20net: phy: Make sure phy_start() always re-enables the phy interruptsTim Beale1-13/+16
This is an alternative way of fixing: commit db9683fb412d ("net: phy: Make sure PHY_RESUMING state change is always processed") When the PHY state transitions from PHY_HALTED to PHY_RESUMING, there are two things we need to do: 1). Re-enable interrupts (and power up the physical link, if powered down) 2). Update the PHY state and net-device based on the link status. There's no strict reason why #1 has to be done from within the main phy_state_machine() function. There is a risk that other changes to the PHY (e.g. setting speed/duplex, which calls phy_start_aneg()) could cause a subsequent state transition before phy_state_machine() has processed the PHY_RESUMING state change. This would leave the PHY with interrupts disabled and/or still in the BMCR_PDOWN/low-power mode. Moving enabling the interrupts and phy_resume() into phy_start() will guarantee this work always gets done. As the PHY is already in the HALTED state and interrupts are disabled, it shouldn't conflict with any work being done in phy_state_machine(). The downside of this change is that if the PHY_RESUMING state is ever entered from anywhere else, it'll also have to repeat this work. Signed-off-by: Tim Beale <tim.beale@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-20HID: wacom: fix an Oops caused by wacom_wac_finger_count_touchesPing Cheng1-0/+3
We assumed all touch interfaces report touch data. But, Bamboo and Intuos non-touch devices report express keys on touch interface. We need to check touch_max before counting touches. Reported-by: Tasos Sahanidis <tasos@tasossah.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-19xen/events: don't bind non-percpu VIRQs with percpu chipDavid Vrabel2-5/+9
A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different VCPU than it is bound to. This can result in a race between handle_percpu_irq() and removing the action in __free_irq() because handle_percpu_irq() does not take desc->lock. The interrupt handler sees a NULL action and oopses. Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER). # cat /proc/interrupts | grep virq 40: 87246 0 xen-percpu-virq timer0 44: 0 0 xen-percpu-virq debug0 47: 0 20995 xen-percpu-virq timer1 51: 0 0 xen-percpu-virq debug1 69: 0 0 xen-dyn-virq xen-pcpu 74: 0 0 xen-dyn-virq mce 75: 29 0 xen-dyn-virq hvc_console Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: <stable@vger.kernel.org>
2015-05-19Merge tag 'pwm/for-4.1-rc5' of ↵Linus Torvalds1-12/+64
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fix from Thierry Reding: "A single fix to make the Pistachio driver respect the limits imposed by hardware" * tag 'pwm/for-4.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: img: Impose upper and lower timebase steps value
2015-05-19pwm: img: Impose upper and lower timebase steps valueNaidu Tellapati1-12/+64
The PWM hardware on Pistachio platform has a maximum timebase steps value to 255. To fix it, let's introduce a compatible-specific data structure to contain the SoC-specific details and use it to specify a maximum timebase. Also, let's limit the minimum timebase to 16 steps, to allow a sane range of duty cycle steps. Fixes: 277bb6a29e00 ("pwm: Imagination Technologies PWM DAC driver") Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-05-19drm/exynos: dp: Lower level of EDID read success messageKrzysztof Kozlowski1-1/+1
Don't pollute the dmesg with EDID read success message as an error. Printing as debug should be fine. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-05-19drm/exynos: cleanup exynos_drm_planeTobias Jakobi1-13/+0
Remove the unused fields of struct exynos_drm_plane. v2: Remove index_color as well, also unused (thanks Joonyoung). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-05-19drm/exynos: 'win' is always unsignedTobias Jakobi3-7/+9
The index for the hardware layer is always >=0. Previous code that also used -1 as special index is now gone. Also apply this to 'ch_enabled' (decon/fimd), since the variable is on the same line (and is again always unsigned). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-05-19drm/exynos: mixer: don't dump registers under spinlockTobias Jakobi1-4/+4
mixer_regs_dump() was called in mixer_run(), which was called under the register spinlock in mixer_graph_buffer() and vp_video_buffer(). This would trigger a sysmmu pagefault with drm.debug=0xff because of the large delay caused by the register dumping. To keep consistency also move register dumping out of mixer_stop(), which is the counterpart to mixer_run(). Kernel dump: [ 131.296529] [drm:mixer_win_commit] win: 2 [ 131.300693] [drm:mixer_regs_dump] MXR_STATUS = 00000081 [ 131.305888] [drm:mixer_regs_dump] MXR_CFG = 000007d5 [ 131.310835] [drm:mixer_regs_dump] MXR_INT_EN = 00000000 [ 131.316043] [drm:mixer_regs_dump] MXR_INT_STATUS = 00000900 [ 131.321598] [drm:mixer_regs_dump] MXR_LAYER_CFG = 00000321 [ 131.327066] [drm:mixer_regs_dump] MXR_VIDEO_CFG = 00000000 [ 131.332535] [drm:mixer_regs_dump] MXR_GRAPHIC0_CFG = 00310700 [ 131.338263] [drm:mixer_regs_dump] MXR_GRAPHIC0_BASE = 20c00000 [ 131.344079] [drm:mixer_regs_dump] MXR_GRAPHIC0_SPAN = 00000780 [ 131.349895] [drm:mixer_regs_dump] MXR_GRAPHIC0_WH = 07800438 [ 131.355537] [drm:mixer_regs_dump] MXR_GRAPHIC0_SXY = 00000000 [ 131.361265] [drm:mixer_regs_dump] MXR_GRAPHIC0_DXY = 00000000 [ 131.366994] [drm:mixer_regs_dump] MXR_GRAPHIC1_CFG = 00000000 [ 131.372723] [drm:mixer_regs_dump] MXR_GRAPHIC1_BASE = 00000000 [ 131.378539] [drm:mixer_regs_dump] MXR_GRAPHIC1_SPAN = 00000000 [ 131.384354] [drm:mixer_regs_dump] MXR_GRAPHIC1_WH = 00000000 [ 131.389996] [drm:mixer_regs_dump] MXR_GRAPHIC1_SXY = 00000000 [ 131.395725] [drm:mixer_regs_dump] MXR_GRAPHIC1_DXY = 00000000 [ 131.401486] PAGE FAULT occurred at 0x0 by 12e20000.sysmmu(Page table base: 0x6d990000) [ 131.409353] Lv1 entry: 0x6e0f2401 [ 131.412753] ------------[ cut here ]------------ [ 131.417339] kernel BUG at drivers/iommu/exynos-iommu.c:358! [ 131.422894] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 131.428709] Modules linked in: ecb bridge stp llc bnep btrfs xor xor_neon zlib_inflate zlib_deflate raid6_pq btusb bluetooth usb_storage s5p_jpeg videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_core [ 131.447461] CPU: 0 PID: 2418 Comm: lt-modetest Tainted: G W 4.0.1-debug+ #3 [ 131.455530] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 131.461607] task: ee194100 ti: ec4fe000 task.ti: ec4fe000 [ 131.466995] PC is at exynos_sysmmu_irq+0x2a0/0x2a8 [ 131.471766] LR is at vprintk_emit+0x268/0x594 [ 131.476103] pc : [<c02781a4>] lr : [<c00650d0>] psr: a00001d3 [ 131.476103] sp : ec4ff9d8 ip : 00000000 fp : ec4ffa14 [ 131.487559] r10: ffffffda r9 : ee206e28 r8 : ee2d1a10 [ 131.492767] r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : ee206e10 [ 131.499277] r3 : c06fca20 r2 : 00000000 r1 : 00000000 r0 : ee28be00 [ 131.505788] Flags: NzCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment user [ 131.513079] Control: 10c5387d Table: 6c72404a DAC: 00000015 [ 131.518808] Process lt-modetest (pid: 2418, stack limit = 0xec4fe218) [ 131.525231] Stack: (0xec4ff9d8 to 0xec500000) [ 131.529571] f9c0: ec4ff9e4 c03a0c40 [ 131.537732] f9e0: bbfa6e35 6d990000 6d161c3d ee20a900 ee04a7e0 00000028 ee007000 00000000 [ 131.545891] fa00: 00000000 c06fb1fc ec4ffa5c ec4ffa18 c0066a34 c0277f10 ee257664 0000000b [ 131.554050] fa20: ec4ffa5c c06fafbb ee04a780 c06fb1e8 00000000 ee04a780 ee04a7e0 ee20a900 [ 131.562209] fa40: ee007000 00000015 ec4ffb48 ee008000 ec4ffa7c ec4ffa60 c0066c90 c00669e0 [ 131.570369] fa60: 00020000 ee04a780 ee04a7e0 00001000 ec4ffa94 ec4ffa80 c0069c6c c0066c58 [ 131.578528] fa80: 00000028 ee004450 ec4ffaac ec4ffa98 c0066028 c0069bac 000000a0 c06e19b4 [ 131.586687] faa0: ec4ffad4 ec4ffab0 c0223678 c0066000 c02235dc 00000015 00000000 00000015 [ 131.594846] fac0: ec4ffc80 00000001 ec4ffaec ec4ffad8 c0066028 c02235e8 00000089 c06bfc54 [ 131.603005] fae0: ec4ffb1c ec4ffaf0 c006633c c0066000 ec4ffb48 f002000c 00000025 00000015 [ 131.611165] fb00: c06c680c ec4ffb48 f0020000 ee008000 ec4ffb44 ec4ffb20 c000867c c00662c4 [ 131.619324] fb20: c02046ac 60000153 ffffffff ec4ffb7c 00000000 00000101 ec4ffbb4 ec4ffb48 [ 131.627483] fb40: c0013240 c0008650 00000001 ee257508 00000002 00000001 ee257504 ee257508 [ 131.635642] fb60: 00000000 c06bf27c 00000000 00000101 ee008000 ec4ffbb4 00000000 ec4ffb90 [ 131.643802] fb80: c002e124 c02046ac 60000153 ffffffff c002e09c 00000000 c06c6080 00000283 [ 131.651960] fba0: 00000001 c06fb1ac ec4ffc0c ec4ffbb8 c002d690 c002e0a8 ee78d080 ee008000 [ 131.660120] fbc0: 00400000 c04eb3b0 ffff7c44 c06c6100 c06fdac0 0000000a c06bf2f0 c06c6080 [ 131.668279] fbe0: c06bfc54 c06bfc54 00000000 00000025 00000000 00000001 ec4ffc80 ee008000 [ 131.676438] fc00: ec4ffc24 ec4ffc10 c002dbb8 c002d564 00000089 c06bfc54 ec4ffc54 ec4ffc28 [ 131.684597] fc20: c0066340 c002dafc ec4ffc80 f002000c 0000001c 0000000c c06c680c ec4ffc80 [ 131.692757] fc40: f0020000 00000080 ec4ffc7c ec4ffc58 c000867c c00662c4 c04e6624 60000053 [ 131.700916] fc60: ffffffff ec4ffcb4 c072df54 ee22d010 ec4ffcdc ec4ffc80 c0013240 c0008650 [ 131.709075] fc80: ee22d664 ee194100 00000000 ec4fe000 60000053 00000400 00000002 ee22d420 [ 131.717234] fca0: c072df54 ee22d010 00000080 ec4ffcdc ec4ffcc8 ec4ffcc8 c04e6620 c04e6624 [ 131.725393] fcc0: 60000053 ffffffff ec4fe000 c072df54 ec4ffd34 ec4ffce0 c02b64d0 c04e6618 [ 131.733552] fce0: ec4ffcf8 00000000 00000000 60000053 00010000 00010000 00000000 200cb000 [ 131.741712] fd00: 20080000 ee22d664 00000001 ee256000 ee261400 ee22d420 00000080 00000080 [ 131.749871] fd20: ee256000 00000280 ec4ffd74 ec4ffd38 c02a8844 c02b5fec 00000080 00000280 [ 131.758030] fd40: 000001e0 00000000 00000000 00000280 000001e0 ee22d220 01e00000 00000002 [ 131.766189] fd60: ee22d420 ee261400 ec4ffdbc ec4ffd78 c0293cbc c02a87a4 00000080 00000280 [ 131.774348] fd80: 000001e0 00000000 00000000 02800000 01e00000 ee261400 ee22d460 ee261400 [ 131.782508] fda0: ee22d420 00000000 01e00000 000001e0 ec4ffe24 ec4ffdc0 c0297800 c0293b24 [ 131.790667] fdc0: 00000080 00000280 000001e0 00000000 00000000 02800000 01e00000 ec4ffdf8 [ 131.798826] fde0: c028db00 00000080 00000080 ee256000 02800000 00000000 ec4ffe24 c06c6448 [ 131.806985] fe00: c072df54 000000b7 ee013800 ec4ffe54 edbf7300 ec4ffe54 ec4fff04 ec4ffe28 [ 131.815145] fe20: c028a848 c029768c 00000001 c06195d8 ec4ffe5c ec4ffe40 c0297680 c0521f6c [ 131.823304] fe40: 00000030 bed45d38 00000030 c03064b7 ec4ffe8c 00000011 00000015 00000022 [ 131.831463] fe60: 00000000 00000080 00000080 00000280 000001e0 00000000 00000000 01e00000 [ 131.839622] fe80: 02800000 00000000 00000000 0004b000 00000000 00000000 c00121e4 c0011080 [ 131.847781] fea0: c00110a4 00000000 00000000 00000000 ec4ffeec ec4ffec0 c00110f0 c00121cc [ 131.855940] fec0: 00000000 c00e7fec ec4ffeec ec4ffed8 c004af2c dc8ba201 edae4fc0 edbf7000 [ 131.864100] fee0: edbf7000 00000003 bed45d38 00000003 bed45d38 ee3f2040 ec4fff7c ec4fff08 [ 131.872259] ff00: c010b62c c028a684 edae4fc0 00000000 00000000 b6666000 ec40d108 edae4fc4 [ 131.880418] ff20: ec4fff6c ec4fff30 c00e7fec c02207b0 000001f9 00000000 edae5008 ec40d110 [ 131.888577] ff40: 00070800 edae5008 edae4fc0 00070800 b6666000 edbf7000 edbf7000 c03064b7 [ 131.896736] ff60: bed45d38 00000003 ec4fe000 00000000 ec4fffa4 ec4fff80 c010b84c c010b208 [ 131.904896] ff80: 00000022 00000000 bed45d38 c03064b7 00000036 c000ede4 00000000 ec4fffa8 [ 131.913055] ffa0: c000ec40 c010b81c 00000000 bed45d38 00000003 c03064b7 bed45d38 00000022 [ 131.921214] ffc0: 00000000 bed45d38 c03064b7 00000036 00000080 00000080 00000000 000001e0 [ 131.929373] ffe0: b6da4064 bed45d1c b6d98968 b6e8082c 60000050 00000003 00000000 00000000 [ 131.937529] Backtrace: [ 131.939967] [<c0277f04>] (exynos_sysmmu_irq) from [<c0066a34>] (handle_irq_event_percpu+0x60/0x278) [ 131.948988] r10:c06fb1fc r9:00000000 r8:00000000 r7:ee007000 r6:00000028 r5:ee04a7e0 [ 131.956799] r4:ee20a900 [ 131.959320] [<c00669d4>] (handle_irq_event_percpu) from [<c0066c90>] (handle_irq_event+0x44/0x64) [ 131.968170] r10:ee008000 r9:ec4ffb48 r8:00000015 r7:ee007000 r6:ee20a900 r5:ee04a7e0 [ 131.975982] r4:ee04a780 [ 131.978504] [<c0066c4c>] (handle_irq_event) from [<c0069c6c>] (handle_level_irq+0xcc/0x144) [ 131.986832] r6:00001000 r5:ee04a7e0 r4:ee04a780 r3:00020000 [ 131.992478] [<c0069ba0>] (handle_level_irq) from [<c0066028>] (generic_handle_irq+0x34/0x44) [ 132.000894] r5:ee004450 r4:00000028 [ 132.004459] [<c0065ff4>] (generic_handle_irq) from [<c0223678>] (combiner_handle_cascade_irq+0x9c/0x108) [ 132.013914] r4:c06e19b4 r3:000000a0 [ 132.017476] [<c02235dc>] (combiner_handle_cascade_irq) from [<c0066028>] (generic_handle_irq+0x34/0x44) [ 132.026847] r8:00000001 r7:ec4ffc80 r6:00000015 r5:00000000 r4:00000015 r3:c02235dc [ 132.034576] [<c0065ff4>] (generic_handle_irq) from [<c006633c>] (__handle_domain_irq+0x84/0xf0) [ 132.043252] r4:c06bfc54 r3:00000089 [ 132.046815] [<c00662b8>] (__handle_domain_irq) from [<c000867c>] (gic_handle_irq+0x38/0x70) [ 132.055144] r10:ee008000 r9:f0020000 r8:ec4ffb48 r7:c06c680c r6:00000015 r5:00000025 [ 132.062956] r4:f002000c r3:ec4ffb48 [ 132.066520] [<c0008644>] (gic_handle_irq) from [<c0013240>] (__irq_svc+0x40/0x74) [ 132.073980] Exception stack(0xec4ffb48 to 0xec4ffb90) [ 132.079016] fb40: 00000001 ee257508 00000002 00000001 ee257504 ee257508 [ 132.087176] fb60: 00000000 c06bf27c 00000000 00000101 ee008000 ec4ffbb4 00000000 ec4ffb90 [ 132.095333] fb80: c002e124 c02046ac 60000153 ffffffff [ 132.100367] r9:00000101 r8:00000000 r7:ec4ffb7c r6:ffffffff r5:60000153 r4:c02046ac [ 132.108098] [<c002e09c>] (tasklet_hi_action) from [<c002d690>] (__do_softirq+0x138/0x38c) [ 132.116251] r8:c06fb1ac r7:00000001 r6:00000283 r5:c06c6080 r4:00000000 r3:c002e09c [ 132.123980] [<c002d558>] (__do_softirq) from [<c002dbb8>] (irq_exit+0xc8/0x104) [ 132.131268] r10:ee008000 r9:ec4ffc80 r8:00000001 r7:00000000 r6:00000025 r5:00000000 [ 132.139080] r4:c06bfc54 [ 132.141600] [<c002daf0>] (irq_exit) from [<c0066340>] (__handle_domain_irq+0x88/0xf0) [ 132.149409] r4:c06bfc54 r3:00000089 [ 132.152971] [<c00662b8>] (__handle_domain_irq) from [<c000867c>] (gic_handle_irq+0x38/0x70) [ 132.161300] r10:00000080 r9:f0020000 r8:ec4ffc80 r7:c06c680c r6:0000000c r5:0000001c [ 132.169112] r4:f002000c r3:ec4ffc80 [ 132.172675] [<c0008644>] (gic_handle_irq) from [<c0013240>] (__irq_svc+0x40/0x74) [ 132.180137] Exception stack(0xec4ffc80 to 0xec4ffcc8) [ 132.185173] fc80: ee22d664 ee194100 00000000 ec4fe000 60000053 00000400 00000002 ee22d420 [ 132.193332] fca0: c072df54 ee22d010 00000080 ec4ffcdc ec4ffcc8 ec4ffcc8 c04e6620 c04e6624 [ 132.201489] fcc0: 60000053 ffffffff [ 132.204961] r9:ee22d010 r8:c072df54 r7:ec4ffcb4 r6:ffffffff r5:60000053 r4:c04e6624 [ 132.212694] [<c04e660c>] (_raw_spin_unlock_irqrestore) from [<c02b64d0>] (mixer_win_commit+0x4f0/0xcc8) [ 132.222060] r4:c072df54 r3:ec4fe000 [ 132.225625] [<c02b5fe0>] (mixer_win_commit) from [<c02a8844>] (exynos_update_plane+0xac/0xb8) [ 132.234126] r10:00000280 r9:ee256000 r8:00000080 r7:00000080 r6:ee22d420 r5:ee261400 [ 132.241937] r4:ee256000 [ 132.244461] [<c02a8798>] (exynos_update_plane) from [<c0293cbc>] (__setplane_internal+0x1a4/0x2c0) [ 132.253395] r7:ee261400 r6:ee22d420 r5:00000002 r4:01e00000 [ 132.259041] [<c0293b18>] (__setplane_internal) from [<c0297800>] (drm_mode_setplane+0x180/0x244) [ 132.267804] r9:000001e0 r8:01e00000 r7:00000000 r6:ee22d420 r5:ee261400 r4:ee22d460 [ 132.275535] [<c0297680>] (drm_mode_setplane) from [<c028a848>] (drm_ioctl+0x1d0/0x58c) [ 132.283428] r10:ec4ffe54 r9:edbf7300 r8:ec4ffe54 r7:ee013800 r6:000000b7 r5:c072df54 [ 132.291240] r4:c06c6448 [ 132.293763] [<c028a678>] (drm_ioctl) from [<c010b62c>] (do_vfs_ioctl+0x430/0x614) [ 132.301222] r10:ee3f2040 r9:bed45d38 r8:00000003 r7:bed45d38 r6:00000003 r5:edbf7000 [ 132.309034] r4:edbf7000 [ 132.311555] [<c010b1fc>] (do_vfs_ioctl) from [<c010b84c>] (SyS_ioctl+0x3c/0x64) [ 132.318842] r10:00000000 r9:ec4fe000 r8:00000003 r7:bed45d38 r6:c03064b7 r5:edbf7000 [ 132.326654] r4:edbf7000 [ 132.329176] [<c010b810>] (SyS_ioctl) from [<c000ec40>] (ret_fast_syscall+0x0/0x34) [ 132.336723] r8:c000ede4 r7:00000036 r6:c03064b7 r5:bed45d38 r4:00000000 r3:00000022 [ 132.344451] Code: e3130002 0affffaf eb09a67d eaffffad (e7f001f2) [ 132.350528] ---[ end trace d428689b94df895c ]--- [ 132.355126] Kernel panic - not syncing: Fatal exception in interrupt [ 132.361465] CPU2: stopping [ 132.364155] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D W 4.0.1-debug+ #3 [ 132.371791] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 132.377866] Backtrace: [ 132.380304] [<c0012484>] (dump_backtrace) from [<c001269c>] (show_stack+0x18/0x1c) [ 132.387849] r6:c06e158c r5:ffffffff r4:00000000 r3:dc8ba201 [ 132.393497] [<c0012684>] (show_stack) from [<c04dfb94>] (dump_stack+0x88/0xc8) [ 132.400698] [<c04dfb0c>] (dump_stack) from [<c0014894>] (handle_IPI+0x1c8/0x2c4) [ 132.408073] r6:c06bfc54 r5:c06bfc54 r4:00000005 r3:ee0b0000 [ 132.413718] [<c00146cc>] (handle_IPI) from [<c00086b0>] (gic_handle_irq+0x6c/0x70) [ 132.421267] r9:f0028000 r8:ee0b1f48 r7:c06c680c r6:fffffff5 r5:00000005 r4:f002800c [ 132.428995] [<c0008644>] (gic_handle_irq) from [<c0013240>] (__irq_svc+0x40/0x74) [ 132.436457] Exception stack(0xee0b1f48 to 0xee0b1f90) [ 132.441493] 1f40: 00000001 00000000 00000000 c00206c0 c06c6518 c04eb3a4 [ 132.449653] 1f60: 00000000 00000000 c06c0dc0 00000001 c06fb774 ee0b1f9c ee0b1fa0 ee0b1f90 [ 132.457811] 1f80: c000f82c c000f830 600f0053 ffffffff [ 132.462844] r9:00000001 r8:c06c0dc0 r7:ee0b1f7c r6:ffffffff r5:600f0053 r4:c000f830 [ 132.470575] [<c000f7f0>] (arch_cpu_idle) from [<c005b6e8>] (cpu_startup_entry+0x318/0x4ec) [ 132.478818] [<c005b3d0>] (cpu_startup_entry) from [<c00144d0>] (secondary_start_kernel+0xf4/0x100) [ 132.487755] r7:c06fd440 [ 132.490279] [<c00143dc>] (secondary_start_kernel) from [<40008744>] (0x40008744) [ 132.497651] r4:6e09006a r3:c000872c [ 132.501210] CPU3: stopping [ 132.503904] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D W 4.0.1-debug+ #3 [ 132.511539] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 132.517614] Backtrace: [ 132.520051] [<c0012484>] (dump_backtrace) from [<c001269c>] (show_stack+0x18/0x1c) [ 132.527597] r6:c06e158c r5:ffffffff r4:00000000 r3:dc8ba201 [ 132.533243] [<c0012684>] (show_stack) from [<c04dfb94>] (dump_stack+0x88/0xc8) [ 132.540446] [<c04dfb0c>] (dump_stack) from [<c0014894>] (handle_IPI+0x1c8/0x2c4) [ 132.547820] r6:c06bfc54 r5:c06bfc54 r4:00000005 r3:ee0b2000 [ 132.553466] [<c00146cc>] (handle_IPI) from [<c00086b0>] (gic_handle_irq+0x6c/0x70) [ 132.561014] r9:f002c000 r8:ee0b3f48 r7:c06c680c r6:fffffff5 r5:00000005 r4:f002c00c [ 132.568743] [<c0008644>] (gic_handle_irq) from [<c0013240>] (__irq_svc+0x40/0x74) [ 132.576205] Exception stack(0xee0b3f48 to 0xee0b3f90) [ 132.581241] 3f40: 00000001 00000000 00000000 c00206c0 c06c6518 c04eb3a4 [ 132.589401] 3f60: 00000000 00000000 c06c0dc0 00000001 c06fb774 ee0b3f9c ee0b3fa0 ee0b3f90 [ 132.597558] 3f80: c000f82c c000f830 600f0053 ffffffff [ 132.602591] r9:00000001 r8:c06c0dc0 r7:ee0b3f7c r6:ffffffff r5:600f0053 r4:c000f830 [ 132.610321] [<c000f7f0>] (arch_cpu_idle) from [<c005b6e8>] (cpu_startup_entry+0x318/0x4ec) [ 132.618566] [<c005b3d0>] (cpu_startup_entry) from [<c00144d0>] (secondary_start_kernel+0xf4/0x100) [ 132.627503] r7:c06fd440 [ 132.630023] [<c00143dc>] (secondary_start_kernel) from [<40008744>] (0x40008744) [ 132.637399] r4:6e09006a r3:c000872c [ 132.640958] CPU1: stopping [ 132.643651] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D W 4.0.1-debug+ #3 [ 132.651287] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 132.657362] Backtrace: [ 132.659799] [<c0012484>] (dump_backtrace) from [<c001269c>] (show_stack+0x18/0x1c) [ 132.667344] r6:c06e158c r5:ffffffff r4:00000000 r3:dc8ba201 [ 132.672991] [<c0012684>] (show_stack) from [<c04dfb94>] (dump_stack+0x88/0xc8) [ 132.680194] [<c04dfb0c>] (dump_stack) from [<c0014894>] (handle_IPI+0x1c8/0x2c4) [ 132.687569] r6:c06bfc54 r5:c06bfc54 r4:00000005 r3:ee0ae000 [ 132.693214] [<c00146cc>] (handle_IPI) from [<c00086b0>] (gic_handle_irq+0x6c/0x70) [ 132.700762] r9:f0024000 r8:ee0aff48 r7:c06c680c r6:fffffff5 r5:00000005 r4:f002400c [ 132.708491] [<c0008644>] (gic_handle_irq) from [<c0013240>] (__irq_svc+0x40/0x74) [ 132.715953] Exception stack(0xee0aff48 to 0xee0aff90) [ 132.720989] ff40: 00000001 00000000 00000000 c00206c0 c06c6518 c04eb3a4 [ 132.729149] ff60: 00000000 00000000 c06c0dc0 00000001 c06fb774 ee0aff9c ee0affa0 ee0aff90 [ 132.737306] ff80: c000f82c c000f830 60070053 ffffffff [ 132.742339] r9:00000001 r8:c06c0dc0 r7:ee0aff7c r6:ffffffff r5:60070053 r4:c000f830 [ 132.750069] [<c000f7f0>] (arch_cpu_idle) from [<c005b6e8>] (cpu_startup_entry+0x318/0x4ec) [ 132.758314] [<c005b3d0>] (cpu_startup_entry) from [<c00144d0>] (secondary_start_kernel+0xf4/0x100) [ 132.767251] r7:c06fd440 [ 132.769772] [<c00143dc>] (secondary_start_kernel) from [<40008744>] (0x40008744) [ 132.777146] r4:6e09006a r3:c000872c [ 132.780709] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-05-19drm/exynos: Consolidate return statements in fimd_bind()Krzysztof Kozlowski1-6/+1
Simplify the code and remove superfluous return statement. Just return the result of fimd_iommu_attach_devices(). Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-05-19drm/exynos: Constify exynos_drm_crtc_opsKrzysztof Kozlowski7-15/+15
The Exynos DRM code does not modify the ops provided by CRTC driver in exynos_drm_crtc_create() call. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-05-19drm/exynos: Fix build breakage on !DRM_EXYNOS_FIMDKrzysztof Kozlowski4-37/+31
Disabling the CONFIG_DRM_EXYNOS_FIMD (e.g. by enabling of CONFIG_FB_S3C) leads to build error: drivers/built-in.o: In function `exynos_dp_dpms': binder.c:(.text+0xd6a840): undefined reference to `fimd_dp_clock_enable' binder.c:(.text+0xd6ab54): undefined reference to `fimd_dp_clock_enable' Fix this by changing direct call to fimd_dp_clock_enable() into optional call to exynos_drm_crtc_ops->clock_enable(). Only the DRM_EXYNOS_FIMD implements this op. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-05-19drm/exynos: mixer: Constify platform_device_idKrzysztof Kozlowski1-1/+1
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-05-19drm/exynos: mixer: cleanup pixelformat handlingTobias Jakobi1-10/+23
Move the defines for the pixelformats that the mixer supports out of mixer_graph_buffer() to the top of the source. Then select the mixer pixelformat (pf) in mixer_graph_buffer() based on the plane's pf (and not bpp). Also add handling of RGB565 and XRGB1555 to the switch statement and exit early if the plane has an unsupported pf. Partially based on 'drm/exynos: enable/disable blend based on pixel format' by Gustavo Padovan <gustavo.padovan@collabora.co.uk>. v2: Use the shorter MXR_FORMAT as prefix. v3: Re-add ARGB8888 because of compatibility reasons (suggested by Joonyoung Shim). Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-05-19drm/exynos: mixer: also allow NV21 for the video processorTobias Jakobi1-0/+3
All the necessary code is already there, just need to handle the format in the switch statement. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-05-19drm/exynos: mixer: remove buffer count handling in vp_video_buffer()Tobias Jakobi1-15/+2
The video processor (VP) supports four formats: NV12, NV21 and its tiled variants. All these formats are bi-planar, so the buffer count in vp_video_buffer() is always 2. Also properly exit if we're called with an invalid (non-VP) pixelformat. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 20:06:22 +0000