summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-05-19drm/exynos: plane: honor buffer offset for dma_addrTobias Jakobi1-1/+1
Previously we were ignoring the buffer offsets that are passed through the addfb2 ioctl. This didn't cause any major issues, since for uni-planar formats (like XRGB8888) userspace would most of the time just use offsets[0]=0. However with NV12 offsets[1] is very likely non-zero. So properly apply the offsets to our dma addresses. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-05-19drm/exynos: fb: use drm_format_num_planes to get buffer countTobias Jakobi1-38/+1
The previous code had some special case handling for the buffer count in exynos_drm_format_num_buffers(). This code was incorrect though, since this special case doesn't exist for DRM. It stemmed from the existence of the special NV12M V4L2 format. NV12 is a bi-planar format (separate planes for luma and chroma) and V4L2 differentiates between a NV12 buffer where luma and chroma is contiguous in memory (so no data between luma/chroma), and a NV12 buffer where luma and chroma have two explicit memory locations (which is then called NV12M). This distinction doesn't exist for DRM. A bi-planar format always explicitly comes with the information about its two planes (even if these planes should be contiguous). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-05-19drm/i915: fix screen flickeringThomas Gummerer1-13/+11
Commit c9f038a1a592 ("drm/i915: Don't assume primary & cursor are always on for wm calculation (v4)") fixes a null pointer dereference. Setting the primary and cursor panes to false in ilk_compute_wm_parameters to false does however give the following errors in the kernel log and causes the screen to flicker. [ 101.133716] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A [ 101.133725] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun Always setting the panes to enabled fixes this error. Helped-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-05-19Merge branch 'msm-fixes-4.1' of git://people.freedesktop.org/~robclark/linux ↵Dave Airlie15-67/+75
into drm-fixes msm fixes, pretty scattered. * 'msm-fixes-4.1' of git://people.freedesktop.org/~robclark/linux: drm/msm: fix locking inconsistencies in gpu->destroy() drm/msm/dsi: Simplify the code to get the number of read byte drm/msm: Attach assigned encoder to eDP and DSI connectors drm/msm: setup vram after component_bind_all() drm/msm/dsi: use pr_err_ratelimited drm/msm: fix unbalanced DRM framebuffer init/destroy drm/msm/mdp5: Fix iteration on INTF config array drm/msm/dsi: Fixup missing *break* statement during cmd rx drm/msm/dp: fix error return code drm: msm: Fix build when legacy fbdev support isn't set drm/msm/dsi: Fix a couple more 64-bit build warnings drm/msm: Fix a couple of 64-bit build warnings
2015-05-19Merge branch 'fixes' of ↵Zhang Rui5-7/+89
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into for-rc
2015-05-18vxlan: correct typo in call to unregister_netdevice_queueJohn W. Linville1-1/+1
By inspection, this appears to be a typo. The gating comparison involves vxlan->dev rather than dev. In fact, dev is the iterator in the preceding loop above but it is actually constant in the 2nd loop. Use of dev seems to be a bad cut-n-paste from the prior call to unregister_netdevice_queue. Change dev to vxlan->dev, since that is what is actually being checked. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18Merge branch 'for-upstream' of ↵David S. Miller2-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2015-05-17 A couple more Bluetooth updates for 4.1: - New USB IDs for ath3k & btusb - Fix for remote name resolving during device discovery Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18MAINTAINERS, be2iscsi: change email domainMinh Tran9-36/+36
be2iscsi change of ownership from Emulex to Avago Technologies recently. We like to get the following updates in: changed "Emulex" to "Avago Technologies", changed email addresses from "emulex.com" to "avagotech.com", updated MAINTAINER list for be2iscsi driver. Signed-off-by: Minh Tran <minh.tran@avagotech.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-18sd: Disable support for 256 byte/sector disksMark Hounschell1-14/+5
256 bytes per sector support has been broken since 2.6.X, and no-one stepped up to fix this. So disable support for it. Signed-off-by: Mark Hounschell <dmarkh@cfl.rr.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-18Merge tag 'for-linus-20150516' of git://git.infradead.org/linux-mtdLinus Torvalds2-5/+7
Pull MTD fixes from Brian Norris: "Two MTD fixes for 4.1: - readtest: the signal-handling code was clobbering the error codes we should be handling/reporting in this test, rendering it useless. Noticed by Coverity. - the common SPI NOR flash DT binding (merged for 4.1-rc1) is being revised, so let's change that before 4.1 is minted" * tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd: Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor" mtd: readtest: don't clobber error reports
2015-05-18RDMA/ocrdma: Update ocrdma version numberSelvin Xavier1-1/+1
Updating the driver version to 10.6.0.0 Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Fail connection for MTU lesser than 512Naga Irrinki1-1/+3
HW currently restricts the IB MTU range between 512 and 4096. Fail connection for MTUs lesser than 512. Signed-off-by: Naga Irrinki <naga.irrinki@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Fix dmac resolution for link local addressMitesh Ahuja2-1/+5
rdma_addr_find_dmac_by_grh fails to resolve dmac for link local address. Use rdma_get_ll_mac to resolve the link local address. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Prevent allocation of DPP PDs if FW doesnt support itMitesh Ahuja2-28/+27
If DPP PDs are not supported by the FW, allocate only normal PDs. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@avagotech.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Fix the request length for RDMA_QUERY_QP mailbox command to FW.Mitesh Ahuja2-1/+3
Fix ocrdma_query_qp to pass correct mailbox request length to FW. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Use VID 0 if PFC is enabled and vlan is not configuredDevesh Sharma2-2/+18
If the adapter ports are in PFC mode and VLAN is not configured, use vlan tag 0 for RoCE traffic. Also, log an advisory message in system logs. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Fix QP state transition in destroy_qpDevesh Sharma1-4/+6
Don't move QP to error state, if QP is in reset state during QP destroy operation. Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Report EQ full fatal errorDevesh Sharma2-0/+13
Detect when Event Queue (EQ) becomes full and print a warning message. Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Fix EQ destroy failure during driver unloadSelvin Xavier1-3/+3
Changing the destroy sequence of mailbox queue and event queues. FW expects mailbox queue to be destroyed before desroying the EQs. Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18mmc: atmel-mci: fix bad variable type for clkdivLudovic Desroches1-2/+7
clkdiv is declared as an u32 but it can be set to a negative value causing a huge divisor value. Change its type to int to avoid this case. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: <stable@vger.kernel.org> # 3.4 and later Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-05-17rtnl/bond: don't send rtnl msg for unregistered ifaceNicolas Dichtel1-1/+1
Before the patch, the command 'ip link add bond2 type bond mode 802.3ad' causes the kernel to send a rtnl message for the bond2 interface, with an ifindex 0. 'ip monitor' shows: 0: bond2: <BROADCAST,MULTICAST,MASTER> mtu 1500 state DOWN group default link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 9: bond2@NONE: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default link/ether ea:3e:1f:53:92:7b brd ff:ff:ff:ff:ff:ff [snip] The patch fixes the spotted bug by checking in bond driver if the interface is registered before calling the notifier chain. It also adds a check in rtmsg_ifinfo() to prevent this kind of bug in the future. Fixes: d4261e565000 ("bonding: create netlink event when bonding option is changed") CC: Jiri Pirko <jiri@resnulli.us> Reported-by: Julien Meunier <julien.meunier@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-16Merge tag 'usb-4.1-rc4' of ↵Linus Torvalds38-140/+171
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB fixes and new device ids for 4.1-rc4. All are pretty minor, and have been in linux-next successfully" * tag 'usb-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices Added another USB product ID for ELAN touchscreen quirks. xhci: gracefully handle xhci_irq dead device xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256 xhci: fix isoc endpoint dequeue from advancing too far on transaction error usb: chipidea: debug: avoid out of bound read USB: visor: Match I330 phone more precisely USB: pl2303: Remove support for Samsung I330 USB: cp210x: add ID for KCF Technologies PRN device usb: gadget: remove incorrect __init/__exit annotations usb: phy: isp1301: work around tps65010 dependency usb: gadget: serial: fix re-ordering of tx data usb: gadget: hid: Fix static variable usage usb: gadget: configfs: Fix interfaces array NULL-termination usb: gadget: xilinx: fix devm_ioremap_resource() check usb: dwc3: dwc3-omap: correct the register macros
2015-05-16Merge tag 'tty-4.1-rc4' of ↵Linus Torvalds8-33/+60
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here's some TTY and serial driver fixes for reported issues. All of these have been in linux-next successfully" * tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: pty: Fix input race when closing tty/n_gsm.c: fix a memory leak when gsmtty is removed Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open" serial: omap: Fix error handling in probe earlycon: Revert log warnings
2015-05-16Merge tag 'staging-4.1-rc4' of ↵Linus Torvalds24-110/+152
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver fixes from Greg KH: "Here's some staging and iio driver fixes to resolve a number of reported issues. All of these have been in linux-next for a while" * tag 'staging-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (31 commits) iio: light: hid-sensor-prox: Fix memory leak in probe() iio: adc: cc10001: Add delay before setting START bit iio: adc: cc10001: Fix regulator_get_voltage() return value check iio: adc: cc10001: Fix incorrect use of power-up/power-down register staging: gdm724x: Correction of variable usage after applying ALIGN() iio: adc: cc10001: Fix the channel number mapping staging: vt6655: lock MACvWriteBSSIDAddress. staging: vt6655: CARDbUpdateTSF bss timestamp correct tsf counter value. staging: vt6655: vnt_tx_packet Correct TX order of OWNED_BY_NIC staging: vt6655: Fix 80211 control and management status reporting. staging: vt6655: implement IEEE80211_TX_STAT_NOACK_TRANSMITTED staging: vt6655: device_free_tx_buf use only ieee80211_tx_status_irqsafe staging: vt6656: use ieee80211_tx_info to select packet type. staging: rtl8712: freeing an ERR_PTR staging: sm750: remove incorrect __exit annotation iio: kfifo: Set update_needed to false only if a buffer was allocated iio: mcp320x: Fix occasional incorrect readings iio: accel: mma9553: check input value for activity period iio: accel: mma9553: add enable channel for activity iio: accel: mma9551_core: prevent buffer overrun ...
2015-05-16Merge tag 'char-misc-4.1-rc4' of ↵Linus Torvalds1-12/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here is one fix, in the extcon subsystem, that resolves a reported issue. It's been in linux-next for a number of weeks now, sorry for not getting it to you sooner" * tag 'char-misc-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: extcon: usb-gpio: register extcon device before IRQ registration
2015-05-16Merge tag 'upstream-4.1-rc4' of git://git.infradead.org/linux-ubifsLinus Torvalds1-0/+2
Pull UBI bufix from Richard Weinberger: "This contains a single bug fix for the UBI block driver" * tag 'upstream-4.1-rc4' of git://git.infradead.org/linux-ubifs: UBI: block: Add missing cache flushes
2015-05-16Merge branch 'for-rc' of ↵Linus Torvalds3-43/+50
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal fixes from Zhang Rui: "Specifics: - fix an issue in intel_powerclamp driver that idle injection target is not accurately maintained on newer Intel CPUs. Package C8 to C10 states are introduced on these CPUs but they were not included in the package c-state residency calculation. From Jacob Pan. - fix a problem that package c-state idle injection was missing on Broadwell server, by adding its id to intel_powerclamp driver. From Jacob Pan. - a couple of small fixes and cleanups from Joe Perches, Mathias Krause, Dan Carpenter and Anand Moon" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: tools/thermal: tmon: fixed the 'make install' command thermal: rockchip: fix an error code thermal/powerclamp: fix missing newer package c-states thermal/intel_powerclamp: add id for broadwell server thermal/intel_powerclamp: add __init / __exit annotations thermal: Use bool function return values of true/false not 1/0
2015-05-16net: phy: Make sure PHY_RESUMING state change is always processedTim Beale1-1/+1
If phy_start_aneg() was called while the phydev is in the PHY_RESUMING state, then its state would immediately transition to PHY_AN (or PHY_FORCING). This meant the phy_state_machine() never processed the PHY_RESUMING state change, which meant interrupts weren't enabled for the PHY. If the PHY used low-power mode (i.e. using BMCR_PDOWN), then the physical link wouldn't get powered up again. There seems no point for phy_start_aneg() to make the PHY_RESUMING --> PHY_AN transition, as the state machine will do this anyway. I'm not sure about the case where autoneg is disabled, as my patch will change behaviour so that the PHY goes to PHY_NOLINK instead of PHY_FORCING. An alternative solution would be to move the phy_config_interrupt() and phy_resume() work out of the state machine and into phy_start(). The background behind this: we're running linux v3.16.7 and from user-space we want to enable the eth port (i.e. do a SIOCSIFFLAGS ioctl with the IFF_UP flag) and immediately afterward set the interface's speed/duplex. Enabling the interface calls .ndo_open() then phy_start() and the PHY transitions PHY_HALTED --> PHY_RESUMING. Setting the speed/duplex ends up calling phy_ethtool_sset(), which calls phy_start_aneg() (meanwhile the phy_state_machine() hasn't processed the PHY_RESUMING state change yet). Signed-off-by: Tim Beale <tim.beale@alliedtelesis.co.nz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15net: phy: Allow EEE for all RGMII variantsFlorian Fainelli1-3/+4
RGMII interfaces come in multiple flavors: RGMII with transmit or receive internal delay, no delays at all, or delays in both direction. This change extends the initial check for PHY_INTERFACE_MODE_RGMII to cover all of these variants since EEE should be allowed for any of these modes, since it is a property of the RGMII, hence Gigabit PHY capability more than the RGMII electrical interface and its delays. Fixes: a59a4d192166 ("phy: add the EEE support and the way to access to the MMD registers") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15rocker: fix a neigh entry leak issueYing Xue1-3/+5
Once we get a neighbour through looking up arp cache or creating a new one in rocker_port_ipv4_resolve(), the neighbour's refcount is already taken. But as we don't put the refcount again after it's used, this makes the neighbour entry leaked. Suggested-by: Eric Dumazet <edumazet@google.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15Merge branch 'parisc-4.1-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "One important patch which fixes crashes due to stack randomization on architectures where the stack grows upwards (currently parisc and metag only). This bug went unnoticed on parisc since kernel 3.14 where the flexible mmap memory layout support was added by commit 9dabf60dc4ab. The changes in fs/exec.c are inside an #ifdef CONFIG_STACK_GROWSUP section and will not affect other platforms. The other two patches rename args of the kthread_arg() function and fixes a printk output" * 'parisc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc,metag: Fix crashes due to stack randomization on stack-grows-upwards architectures parisc: copy_thread(): rename 'arg' argument to 'kthread_arg' parisc: %pf is only for function pointers
2015-05-15Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"Brian Norris1-3/+3
In commit 8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"), we added a generic "nor-jedec" binding to catch all mostly-compatible SPI NOR flash which can be detected via the READ ID opcode (0x9F). This was discussed and reviewed at the time, however objections have come up since then as part of this discussion: http://lkml.kernel.org/g/20150511224646.GJ32500@ld-irv-0074 It seems the parties involved agree that "jedec,spi-nor" does a better job of capturing the fact that this is SPI-specific, not just any NOR flash. This binding was only merged for v4.1-rc1, so it's still OK to change the naming. At the same time, let's move the documentation to a better name. Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the documentation. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com>
2015-05-15Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "A tegra irqchip driver memory corruption fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: tegra: Set the proper base address in irq chip data
2015-05-15Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds8-12/+23
Pull drm fixes from Dave Airlie: "Radeon: one oops fix, one bug fix, one pci id addition patch i915: one suspend/resume regression fix. All seems quiet enough." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: don't do mst probing if MST isn't enabled. drm/radeon: add new bonaire pci id drm/radeon: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling drm/i915: Avoid GPU hang when coming out of s3 or s4
2015-05-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge misc fixes from Andrew Morton: "8 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, numa: really disable NUMA balancing by default on single node machines MAINTAINERS: update Jingoo Han's email address CMA: page_isolation: check buddy before accessing it uidgid: make uid_valid and gid_valid work with !CONFIG_MULTIUSER kernfs: do not account ino_ida allocations to memcg gfp: add __GFP_NOACCOUNT tools/vm: fix page-flags build drivers/rtc/rtc-armada38x.c: remove unused local `flags'
2015-05-15net: macb: Add better comment for RXUBR handlingNathan Sullivan1-0/+6
Describe the handler for RXUBR better with a new comment. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Reviewied-by: Josh Cartwright <joshc@ni.com> Reviewied-by: Ben Shelton <ben.shelton@ni.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15drm/msm: fix locking inconsistencies in gpu->destroy()Rob Clark3-3/+3
In error paths, this was being called without struct_mutex held. Leading to panics like: msm 1a00000.qcom,mdss_mdp: No memory protection without IOMMU Kernel panic - not syncing: BUG! CPU: 0 PID: 1409 Comm: cat Not tainted 4.0.0-dirty #4 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Call trace: [<ffffffc000089c78>] dump_backtrace+0x0/0x118 [<ffffffc000089da0>] show_stack+0x10/0x20 [<ffffffc0006686d4>] dump_stack+0x84/0xc4 [<ffffffc0006678b4>] panic+0xd0/0x210 [<ffffffc0003e1ce4>] drm_gem_object_free+0x5c/0x60 [<ffffffc000402870>] adreno_gpu_cleanup+0x60/0x80 [<ffffffc0004035a0>] a3xx_destroy+0x20/0x70 [<ffffffc0004036f4>] a3xx_gpu_init+0x84/0x108 [<ffffffc0004018b8>] adreno_load_gpu+0x58/0x190 [<ffffffc000419dac>] msm_open+0x74/0x88 [<ffffffc0003e0a48>] drm_open+0x168/0x400 [<ffffffc0003e7210>] drm_stub_open+0xa8/0x118 [<ffffffc0001a0e84>] chrdev_open+0x94/0x198 [<ffffffc000199f88>] do_dentry_open+0x208/0x310 [<ffffffc00019a4c4>] vfs_open+0x44/0x50 [<ffffffc0001aa26c>] do_last.isra.14+0x2c4/0xc10 [<ffffffc0001aac38>] path_openat+0x80/0x5e8 [<ffffffc0001ac354>] do_filp_open+0x2c/0x98 [<ffffffc00019b60c>] do_sys_open+0x13c/0x228 [<ffffffc00019b72c>] SyS_openat+0xc/0x18 CPU1: stopping But there isn't any particularly good reason to hold struct_mutex for teardown, so just standardize on calling it without the mutex held and use the _unlocked() versions for GEM obj unref'ing Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-05-15Merge tag 'drm-intel-fixes-2015-05-13' of ↵Dave Airlie1-3/+10
git://anongit.freedesktop.org/drm-intel into drm-fixes fix one gpu hang on resume. * tag 'drm-intel-fixes-2015-05-13' of git://anongit.freedesktop.org/drm-intel: drm/i915: Avoid GPU hang when coming out of s3 or s4
2015-05-15Merge branch 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie7-9/+13
into drm-fixes radeon minor fixes, and pci id addition. * 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: don't do mst probing if MST isn't enabled. drm/radeon: add new bonaire pci id drm/radeon: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling
2015-05-14net/mlx4: Avoid 'may be used uninitialized' warningsBjorn Helgaas1-4/+4
With a cross-compiler based on gcc-4.9, I see warnings like the following: drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'mlx4_SW2HW_CQ_wrapper': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3048:10: error: 'cq' may be used uninitialized in this function [-Werror=maybe-uninitialized] cq->mtt = mtt; I think the warning is spurious because we only use cq when cq_res_start_move_to() returns zero, and it always initializes *cq in that case. The srq case is similar. But maybe gcc isn't smart enough to figure that out. Initialize cq and srq explicitly to avoid the warnings. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14Merge tag 'pm+acpi-4.1-rc4' of ↵Linus Torvalds2-14/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "Two fixes here, one revert of a recent ACPICA commit that broke audio support on one Dell machine and a fix for a long-standing issue that may cause systems to break randomly during boot. Specifics: - The recent ACPICA commit that set the ACPI _REV return value to 2 (which is the value always used by Windows and now mandated by the spec too) in order to prevent the firmware people from using it to play tricks with us caused a serious audio regression to happen on Dell XPS 13 (the AML on that machine uses the _REV return value to decide how to expose audio to the OS and does that to hide the lack of proper support for its I2S audio in Linux), so revert that commit for now and we'll revisit the issue in the next cycle. - Ensure that the ordering of acpi_reserve_resources() with respect to the rest of the ACPI initialization sequence will always be the same, or the IO or memory region occupied by the ACPI fixed registers may be assigned to a PCI host bridge as a result of a race and random breakage ensues going forward" * tag 'pm+acpi-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPICA: Permanently set _REV to the value '2'." ACPI / init: Fix the ordering of acpi_reserve_resources()
2015-05-14Merge branch 'dmi-for-linus' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi fixes from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi_scan: Fix ordering of product_uuid firmware: dmi_scan: Simplified displayed version
2015-05-14drivers/rtc/rtc-armada38x.c: remove unused local `flags'Andrew Morton1-1/+1
Reported-by: Fengguang Wu <fengguang.wu@gmail.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-15Merge branches 'acpi-init' and 'acpica'Rafael J. Wysocki105-641/+1662
* acpi-init: ACPI / init: Fix the ordering of acpi_reserve_resources() * acpica: Revert "ACPICA: Permanently set _REV to the value '2'."
2015-05-14drm/msm/dsi: Simplify the code to get the number of read byteHai Li1-10/+4
During cmd rx, only new versions of H/W provide register to read back the real number of byte returned by panel. For the old versions, reading this register will not get the right number. In fact, we only need to assume the returned data is the same size as we expected, because later we will check the data type to detect error. Signed-off-by: Hai Li <hali@codeaurora.org>
2015-05-14drm/msm: Attach assigned encoder to eDP and DSI connectorsHai Li3-6/+12
drm_mode_connector_attach_encoder() function call is missing during eDP and DSI connector initialization. As a result, no encoder is returned by DRM_IOCTL_MODE_GETCONNECTOR system call. This change is to fix this issue. Signed-off-by: Hai Li <hali@codeaurora.org>
2015-05-14Merge tag 'usb-serial-4.1-rc4' of ↵Greg Kroah-Hartman4-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.1-rc4 Here are a few device-id changes removing a duplicate entry, refining another and adding a third. Signed-off-by: Johan Hovold <johan@kernel.org>
2015-05-14mtd: readtest: don't clobber error reportsBrian Norris1-2/+4
Commit 2a6a28e7922c ("mtd: Make MTD tests cancelable") accidentally clobbered any read failure reports. Coverity CID #1296020 Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-14drm/msm: setup vram after component_bind_all()Rob Clark1-4/+4
First of all, we don't want -EPROBE_DEFER when trying to bind children to cause us to forget to free our vram. And second we don't want vram allocation fail to trigger _unbind_all() before _bind_all(). Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-05-14drm/msm/dsi: use pr_err_ratelimitedRob Clark1-1/+1
When things go badly we can get a lot of these error irqs. Let's not DoS the user. Signed-off-by: Rob Clark <robdclark@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 23:17:57 +0000