summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-07-21mwifiex: enable traffic only when port is openAvinash Patil7-3/+16
This patch adds support to enable data traffic only when port is open. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: support for bypass tx queueAvinash Patil6-2/+111
This patch adds support for another TX queue in driver- bypass TX queue. This queue is used for sending data/mgmt packets while in disconnected state i.e. when port is yet not unblocked. TDLS setup packets would also be queued in this queue. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: update domain_info upon band change in start_apAvinash Patil3-2/+9
It was observed that AP beacons would not reflect correct regulatory information upon starting AP in A band. This was because of missing AP config band update in set_channel of start_ap. Also we configure 11D settings info FW only for specific band. So we need to download domain info to FW even if domain remains unchanged but band is changed. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: add cfg80211 tdls channel switch handlerXinming Hu1-0/+72
This patch add cfg80211 tdls_chan_switch and tdls_cancel_chan_switch handler. With this handlers, mwifiex would support TDLS channel switch feature. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: enhance tdls link setup conditionXinming Hu4-7/+25
TDLS link status - channel switching, off channel or base channel itself indicates that TDLS link is setup. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: enable tdls channel switch ext_capXinming Hu1-0/+6
This patch enable tdls channel switch ext capability in tdls action frame, and also configure basic tdls channel switch parameters while tdls setup completed and tdls link is enabled.. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: add tdls config commandXinming Hu5-0/+166
This patch add support for a new tdls configuration command which is used for configuration of tdls channel switch parameters. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: process tdls channel switch eventXinming Hu4-1/+117
This patch add support for tdls channel switch event process. We block TX queues for particular RA list depending upon channel switch state. If channel switch state is moving to base channel, we unblock RA lists for AP. If channel switch state is moving to off channel, we unblock TDLS peer RA lists. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: add tdls channel switch statusXinming Hu4-2/+77
This patch add new tdls status used for tdls channel switch. Driver in turn would block cmd path and data path if tdls channel switching. Data path to non tdls peer should be blocked if tdls channel switch to off-channel. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: do not increase tx_pkts_queued if receive address tx pausedXinming Hu1-1/+4
If tx_pkts_queued is increased for tx paused receive address, tx process will be triggered for this packet. But since RA list was tx paused, there will be an infinite loop in mwifiex_wmm_process_tx waiting for the event(tx pause, tdls cs) to cancel tx pause. This will be an dead loop, since main_process was locked at this time, there will be no opportunity to process event. So do not increase tx_pkts_queued if receive address tx paused, this will be restored RA list is unpaused. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: block data traffic to tx paused receive addressXinming Hu1-1/+2
Data traffic to tx paused receive address should be blocked. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: add tx data pause supportAvinash Patil5-0/+118
This patch adds support to enable TX data pause feature for mwifiex. Whenever FW TX buffers reach threshold, FW would send TX pause event to driver. Driver in turn would block data traffic to that particular receiver address. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21rtlwifi: rtl8192cu: Remove rtl8723 codeTaehee Yoo3-36/+1
In the rtlwifi/rtl8192cu, rtl8723 code is dead code. So I remove it. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21Merge ath-next from ath.git.Kalle Valo27-239/+3391
Major changes in ath10k: * enable VHT for IBSS * initial work to support qca99x0 and the corresponding 10.4 firmware branch
2015-07-11ath9k: DFS - add pulse chirp detection for FCCZefir Kurtisi1-6/+161
FCC long pulse radar (type 5) requires pulses to be checked for chirping. This patch implements chirp detection based on the FFT data provided for long pulses. A chirp is detected when a set of criteria defined by FCC pulse characteristics is met, including * have at least 4 FFT samples * max_bin index moves equidistantly between samples * the gradient is within defined range The chirp detection has been tested with reference radar generating devices and proved to work reliably. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-11ath9k: DFS - consider ext_channel pulses only in HT40 modeZefir Kurtisi1-1/+2
The chip reports radar pulses on extension channel even if operating in HT20 mode. This patch adds a sanity check for HT40 mode before it feeds pulses on extension channel to the pattern detector. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-11ipw2100: fix timeout bug - always evaluated to 0Nicholas Mc Guire1-1/+1
commit 2c86c275015c ("Add ipw2100 wireless driver.") introduced HW_PHY_OFF_LOOP_DELAY (HZ / 5000) which always evaluated to 0. Clarified by Stanislav Yakovlev <stas.yakovlev@gmail.com> that it should be 50 milliseconds thus fixed up to msecs_to_jiffies(50). Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Acked-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-11ath10k: tweak interface combinationsMichal Kazior1-5/+34
Concurrent AP/GO operation on different channels isn't really supported well by the firmware so it's better to remove it from being advertised. Also tune the way station and p2p client interface limits are expressed to allow station + 2x p2p client or station + p2p client + p2p go. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: fix per-vif queue lockingMichal Kazior3-42/+45
Whenever any vdev was supposed to be paused all Tx queues were stopped (except offchannel) instead of only these associated with the given vdev. This caused subtle issues with multi-channel/multi-vif scenarios, e.g. authentication of station vif could sometimes fail depending on fw tx pause request timing. Fixes: b4aa539dd8f2 ("ath10k: implement tx pause wmi event") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: update vdev ps state on startMichal Kazior1-0/+8
Psmode can be forcefully enabled when vdev isn't started. It isn't guaranteed that mac80211 will re-issue psmode setting after vdev is started unless actual bss_conf.ps value has changed. Even if this doesn't fix any problems now it may prevent future breakage. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: fix hw roc expiration notifcationMichal Kazior2-3/+10
The expiration function must not be called when roc is explicitly cancelled by mac80211. However since fcf9844636be ("ath10k: fix hw roc expiration") the notification was never sent when roc actually expired. This fixes some P2P connection setup issues. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: limit multi-vif ps more aggresivellyMichal Kazior1-3/+3
Further testing proved that multi-channel AP+STA on QCA6174 with RM.2.0-00088 should have powersave force-disabled to avoid beacon misses/skipping on either side which in turn could disrupt communication. Since AP never has arvif->ps don't even bother checking it. Other combinations may be broken as well so disallow powersave with multivif outright unless firmware advertises otherwise. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: don't set cck/ofdm scan flagsMichal Kazior2-4/+0
mac80211 already does provide complete IEs for Probe Requests for hw scan and ath10k firmware was appending duplicate Supported Rates IEs unnecessarily. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: Fix target to cpu address conversion logicVasanthakumar Thiagarajan1-1/+1
In commit 418ca5992e2f ("ath10k: Make target cpu address to CE address conversion chip specific") mask 0x7fff is added by mistake instead of 0x7ff. Fix this regression. Fixes: 418ca5992e2f ("ath10k: Make target cpu address to CE address conversion chip specific") Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: fix QCA61X4 boot upBartosz Markowski1-1/+1
commit a521ee983d312db7 ("ath10k: Add new reg_address/mask to hw register table") broke QCA61x4 support by providing wrong fw_indicator_address, which should have been 0x0003a028 instead of 0x00009028. User experience was a failing boot up sequence (crashing device during initialization): [ 181.663874] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002) [ 181.664787] ath10k_pci 0000:02:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 181.688886] ath10k_pci 0000:02:00.0: device has crashed during init [ 181.688897] ath10k_pci 0000:02:00.0: failed to wait for target after cold reset: -70 [ 181.688902] ath10k_pci 0000:02:00.0: failed to reset chip: -70 [ 181.689774] ath10k_pci: probe of 0000:02:00.0 failed with error -70 Fix it by updating the address with correct value. Fixes: a521ee983d31 ("ath10k: Add new reg_address/mask to hw register table") Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-10be2net: bump up the driver version to 10.6.0.3Sathya Perla1-1/+1
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-10be2net: make SET_LOOPBACK_MODE cmd asynchrounousSuresh Reddy3-5/+35
The SET_LOOPBACK_MODE command is always issued from ethtool only in a process context. So, while waiting for the cmd to complete, the driver can sleep instead of holding spin_lock_bh() on the mcc_lock. This is done by calling be_mcc_notify() instead of be_mcc_notify_wait() (that returns only after the cmd completes while the MCCQ is locked). Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-10be2net: make the RX_FILTER command asynchronousSuresh Reddy1-1/+1
This fix makes the RX_FILTER cmd asynchronous, i.e., the caller issues this cmd and doesn't wait for a completion from the FW. If the FW/adapter is in an error state, this change helps in not holding up the rtnl_lock and keeping bottom halves disabled while the driver timesout waiting for a response from the FW. Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-10be2net: return error status from be_mcc_notify()Suresh Reddy1-11/+28
When the adapter is in error state, return error from be_mcc_notify() so that the caller routines need not sleep waiting for a response. Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-10be2net: convert dest field in udp-hdr to host-endianVenkat Duvvuru1-1/+1
The "dest" field in the UDP-hdr of a TX skb is in network endian format. Convert it to host endian before accessing it. The os2bmc patch, mentioned below introduced this code. Fixes: 760c295e0e8d ("be2net: Support for OS2BMC") Signed-off-by: Venkat Duvvuru <VenkatKumar.Duvvuru@Emulex.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-10be2net: fix wrong return value in be_check_ufi_compatibility()Vasundhara Volam1-1/+1
In the commit a6e6ff6eee12f3e ("be2net: simplify UFI compatibility checking"), a return value of "-1" was incorrectly used in place of "false". This patch fixes it. Fixes: a6e6ff6eee12f3e ("be2net: simplify UFI compatibility checking") Signed-off-by: Vasundhara Volam <vasundhara.volam@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-10be2net: remove redundant D0 power state setKalesh Purayil1-2/+0
pci_enable_device() call sets device power state to D0; there is no need doing it again. Signed-off-by: Kalesh AP <kalesh.purayil@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-10be2net: query FW to check if EVB is enabledKalesh Purayil2-3/+4
The current code assumes that bridge functionality (EVB) in the adapter is enabled only when SR-IOV is enabled. This is not always true. This patch uses the GET_HSW_CONFIG FW cmd to query this from the FW. Signed-off-by: Kalesh AP <kalesh.purayil@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-10be2net: remove duplicate code in be_setup_wol()Kalesh Purayil1-17/+11
This change will make be_setup_wol() routine more compact and readable by removing some duplicate code. Signed-off-by: Kalesh AP <kalesh.purayil@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-10net: Drop owner assignment from platform_driverKrzysztof Kozlowski3-3/+0
platform_driver does not need to set an owner because platform_driver_register() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-10net: phy: Support setting polarity in marvell phy driverDavid Thomson2-2/+41
Support manually setting the polarity to mdi or mdix Signed-off-by: David Thomson <david.thomson@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-10net: phy: Pass mdix ethtool setting through to phy driverDavid Thomson1-0/+2
Pass the mdix setting from ethtool down to the phy driver, to allow driver specific implementations of manually setting the polarity. Signed-off-by: David Thomson <david.thomson@alliedtelesis.co.nz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-09dsa: mv88e6352/mv88e6xxx: Add support for Marvell 88E6320 and 88E6321Aleksey S. Kazantsev4-22/+65
MV88E6320 and MV88E6321 are largely compatible to MV886352, but are members of a different chip family. Signed-off-by: Aleksey S. Kazantsev <ioctl@yandex.ru> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-09rocker: add change MTU supportScott Feldman2-0/+62
Implement ndo_change_mtu: on MTU change, reallocate Rx ring bufs and signal HW of new port MTU value. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Tested-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-09neterion: s2io: Use module_pci_driverVaishali Thakkar2-27/+1
Use module_pci_driver for drivers whose init and exit functions only register and unregister, respectively. A simplified version of the Coccinelle semantic patch that performs this transformation is as follows: @a@ identifier f, x; @@ -static f(...) { return pci_register_driver(&x); } @b depends on a@ identifier e, a.x; statement S; @@ -static e(...) { -pci_unregister_driver(&x); -DBG_PRINT(INIT_DBG,"S"); - } @c depends on a && b@ identifier a.f; declarer name module_init; @@ -module_init(f); @d depends on a && b && c@ identifier b.e, a.x; declarer name module_exit; declarer name module_pci_driver; @@ -module_exit(e); +module_pci_driver(x); Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-09cxgb4vf: Fix check to use new User Doorbell mechanismHariprasad Shenai1-3/+9
If we don't have access to the new User GTS (T5+), use the old doorbell mechanism; otherwise use the new BAR2 mechanism. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08cxgb4: Enable cim_la dump to support T6Hariprasad Shenai1-3/+51
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08cxgb4: Read stats for only available channelsHariprasad Shenai1-47/+26
Updating the driver to read the stats of only available channels. T6 and later has only 2 channels Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08cxgb4: Update register ranges for T6 adapterHariprasad Shenai1-7/+9
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08cxgb4: Don't use entire L2T table, use only its sliceHariprasad Shenai4-44/+71
The driver was retrieving the parameters for the bounds of its slice of the L2T from the firmware and then throwing those away and using the entire table. This corrects that problem. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08net: ec_bhf: Use module_pci_driverVaishali Thakkar1-13/+1
Use module_pci_driver for drivers whose init and exit functions only register and unregister, respectively. A simplified version of the Coccinelle semantic patch that performs this transformation is as follows: @a@ identifier f, x; @@ -static f(...) { return pci_register_driver(&x); } @b depends on a@ identifier e, a.x; @@ -static e(...) { pci_unregister_driver(&x); } @c depends on a && b@ identifier a.f; declarer name module_init; @@ -module_init(f); @d depends on a && b && c@ identifier b.e, a.x; declarer name module_exit; declarer name module_pci_driver; @@ -module_exit(e); +module_pci_driver(x); Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08hv_netvsc: Add support to set MTU reservation from guest sideHaiyang Zhang3-3/+3
When packet encapsulation is in use, the MTU needs to be reduced for headroom reservation. The existing code takes the updated MTU value only from the host side. But vSwitch extensions, such as Open vSwitch, require the flexibility to change the MTU to different values from within a guest during the lifecycle of a vNIC, when the encapsulation protocol is changed. The patch supports this kind of MTU changes. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08ifb: add multiqueue operationEric Dumazet1-87/+120
Add multiqueue capabilities to ifb netdevice. This removes last bottleneck for ingress when mq qdisc can be used to shard load from multiple RX queues on physical device. Tested: # netem based setup, installed at receiver side ETH=eth0 IFB=ifb10 EST="est 1sec 4sec" # Optional rate estimator RTT_HALF=2ms #REORDER=20us #LOSS="loss 1" TXQ=8 ip link add ifb10 numtxqueues $TXQ type ifb ip link set dev $IFB up tc qdisc add dev $ETH ingress 2>/dev/null tc filter add dev $ETH parent ffff: \ protocol ip u32 match u32 0 0 flowid 1:1 \ action mirred egress redirect dev $IFB tc qdisc del dev $IFB root 2>/dev/null tc qdisc add dev $IFB root handle 1: mq for i in `seq 1 $TXQ` do slot=$( printf %x $(( i )) ) tc qd add dev $IFB parent 1:$slot $EST netem \ limit 100000 delay $RTT_HALF $REORDER $LOSS done lpaa24:~# tc -s -d qd sh dev ifb10 qdisc mq 1: root Sent 316544766 bytes 5265927 pkt (dropped 0, overlimits 0 requeues 0) backlog 98880b 1648p requeues 0 qdisc netem 8002: parent 1:1 limit 100000 delay 2.0ms Sent 39601416 bytes 658721 pkt (dropped 0, overlimits 0 requeues 0) rate 38235Kbit 79657pps backlog 12240b 204p requeues 0 qdisc netem 8003: parent 1:2 limit 100000 delay 2.0ms Sent 39472866 bytes 657227 pkt (dropped 0, overlimits 0 requeues 0) rate 38234Kbit 79655pps backlog 10620b 176p requeues 0 qdisc netem 8004: parent 1:3 limit 100000 delay 2.0ms Sent 39703417 bytes 659699 pkt (dropped 0, overlimits 0 requeues 0) rate 38320Kbit 79831pps backlog 12780b 213p requeues 0 qdisc netem 8005: parent 1:4 limit 100000 delay 2.0ms Sent 39565149 bytes 658011 pkt (dropped 0, overlimits 0 requeues 0) rate 38174Kbit 79530pps backlog 11880b 198p requeues 0 qdisc netem 8006: parent 1:5 limit 100000 delay 2.0ms Sent 39506078 bytes 657354 pkt (dropped 0, overlimits 0 requeues 0) rate 38195Kbit 79571pps backlog 12480b 208p requeues 0 qdisc netem 8007: parent 1:6 limit 100000 delay 2.0ms Sent 39675994 bytes 658849 pkt (dropped 0, overlimits 0 requeues 0) rate 38323Kbit 79838pps backlog 12600b 210p requeues 0 qdisc netem 8008: parent 1:7 limit 100000 delay 2.0ms Sent 39532042 bytes 658367 pkt (dropped 0, overlimits 0 requeues 0) rate 38177Kbit 79536pps backlog 13140b 219p requeues 0 qdisc netem 8009: parent 1:8 limit 100000 delay 2.0ms Sent 39488164 bytes 657705 pkt (dropped 0, overlimits 0 requeues 0) rate 38192Kbit 79568pps backlog 13Kb 222p requeues 0 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08cxgb4: Add PCI device ids for few more T5 and T6 adaptersHariprasad Shenai1-0/+18
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08net/mlx4_core: Add extra check for total vfs for SRIOVCarol Soto1-6/+14
Add extra check for total vfs for SRIOV to check if that value is bigger than total vfs in pci SRIOV capabalities. Fix a check and print of the number of maximum vfs that hw can handle. Fix a check and print of the number of maximum vfs per port that driver can handle. Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 05:44:55 +0000