summaryrefslogtreecommitdiff
path: root/drivers/platform
AgeCommit message (Collapse)AuthorFilesLines
2015-01-23Revert "platform: x86: dell-laptop: Add support for keyboard backlight"Darren Hart1-1049/+6
This reverts commit 02b2aaaa57ab41504e8d03a3b2ceeb9440a2c188. This interface was determined to be flawed and required too invasive a fix for the RC cycle. This will be revisited in 3.20. Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-18Merge tag 'platform-drivers-x86-v3.19-1' of ↵Linus Torvalds20-347/+1707
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver update from Darren Hart: - thinkpad-acpi: Switch to software mute, cleanups - acerhdf: Bang-bang thermal governor, new models, cleanups - dell-laptop: New keyboard backlight support and documentation - toshiba_acpi: Keyboard backlight updates, hotkey handling - dell-wmi: Keypress filtering, WMI event processing - eeepc-laptop: Multiple cleanups, improved error handling, documentation - hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails - misc: Code cleanups, quirks, various new IDs * tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (33 commits) platform/x86/acerhdf: Still depends on THERMAL Documentation: Add entry for dell-laptop sysfs interface acpi: Remove _OSI(Linux) for ThinkPads thinkpad-acpi: Try to use full software mute control acerhdf: minor clean up acerhdf: added critical trip point acerhdf: Use bang-bang thermal governor acerhdf: Adding support for new models acerhdf: Adding support for "manual mode" dell-smo8800: Add more ACPI ids and change description of driver platform: x86: dell-laptop: Add support for keyboard backlight toshiba_acpi: Add keyboard backlight mode change event toshiba_acpi: Change notify funtion to handle more events toshiba_acpi: Move hotkey enabling code to its own function dell-wmi: Don't report keypresses on keybord illumination change dell-wmi: Don't report keypresses for radio state changes hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails toshiba-acpi: Add missing ID (TOS6207) Sony-laptop: Deletion of an unnecessary check before the function call "pci_dev_put" platform: x86: Deletion of checks before backlight_device_unregister() ...
2014-12-15platform/x86/acerhdf: Still depends on THERMALRandy Dunlap1-1/+1
acerhdf uses thermal interfaces so it should depend on THERMAL. It also should not select a thermal driver without checking that THERMAL is enabled. This fixes the following build errors when THERMAL=m and ACERHDF=y. drivers/built-in.o: In function `acerhdf_set_mode': acerhdf.c:(.text+0x3e02e1): undefined reference to `thermal_zone_device_update' drivers/built-in.o: In function `acerhdf_unbind': acerhdf.c:(.text+0x3e052d): undefined reference to `thermal_zone_unbind_cooling_device' drivers/built-in.o: In function `acerhdf_bind': acerhdf.c:(.text+0x3e0593): undefined reference to `thermal_zone_bind_cooling_device' drivers/built-in.o: In function `acerhdf_init': acerhdf.c:(.init.text+0x1c2f5): undefined reference to `thermal_cooling_device_register' acerhdf.c:(.init.text+0x1c360): undefined reference to `thermal_zone_device_register' drivers/built-in.o: In function `acerhdf_unregister_thermal': acerhdf.c:(.text.unlikely+0x3c67): undefined reference to `thermal_cooling_device_unregister' acerhdf.c:(.text.unlikely+0x3c91): undefined reference to `thermal_zone_device_unregister' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Peter Feuerer <peter@piie.net> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds23-24/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-10Merge branch 'thinkpad-acpi' into for-nextDarren Hart1-10/+106
thinkpad-acpi: acpi: Remove _OSI(Linux) for ThinkPads thinkpad-acpi: Try to use full software mute control Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-04thinkpad-acpi: Try to use full software mute controlAndy Lutomirski1-10/+106
ThinkPads have hardware volume controls and three buttons to control them. (These are separate from the standard mixer.) By default, the buttons are: - Mute: Mutes the hardware volume control and, on some models, generates KEY_MUTE. - Up: Unmutes, generates KEY_VOLUMEUP, and increases volume if applicable. (Newer thinkpads only have hardware mute/unmute.) - Down: Unmutes, generates KEY_VOLUMEDOWN, and decreases volume if applicable. This behavior is unfortunate, since modern userspace will also handle the hotkeys and change the other mixer. If the software mixer is muted and the hardware mixer is unmuted and you push mute, hilarity ensues as they both switch state. Rather than adding a lot of complex ALSA integration to fix this, just disable the special ThinkPad volume controls when possible. This turns the mute and volume buttons into regular buttons, and standard software controls will work as expected. ALSA already knows about the mute light on models with a mute light, so everything should just work. This should also allow us to remove _OSI(Linux) for all ThinkPads. For future reference: It turns out that we can ask ACPI for one of three behaviors directly on very new models. They are "latch" (the default), "none" (no automatic control), and "toggle" (mute unmutes when muted). All of the modes besides "none" seem to be a bit buggy, though, and there doesn't seem to be a consistent way to get any notification when the HW mute state is changed. Signed-off-by: Andy Lutomirski <luto@mit.edu> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-04acerhdf: minor clean upPeter Feuerer1-6/+6
* renamed bios_settings_t to bios_settings, as it is no typedef * replaced "unsigned char" by u8 in bios_settings struct for better readability. Cc: platform-driver-x86@vger.kernel.org Cc: Darren Hart <dvhart@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Mohr <andi@lisas.de> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Peter Feuerer <peter@piie.net> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-04acerhdf: added critical trip pointPeter Feuerer1-1/+9
added critical trip point which represents the temperature limit. Added return -EINVAL in case wrong trip point is provided. Cc: platform-driver-x86@vger.kernel.org Cc: Darren Hart <dvhart@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Mohr <andi@lisas.de> Cc: Borislav Petkov <bp@suse.de> Cc: Javi Merino <javi.merino@arm.com> Signed-off-by: Peter Feuerer <peter@piie.net> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-04acerhdf: Use bang-bang thermal governorPeter Feuerer2-6/+33
acerhdf has been doing an on-off fan control using hysteresis by post-manipulating the outcome of thermal subsystem trip point handling. This patch enables acerhdf to use the bang-bang governor, which is intended for on-off controlled fans. Cc: platform-driver-x86@vger.kernel.org Cc: Darren Hart <dvhart@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> CC: Zhang Rui <rui.zhang@intel.com> Cc: Andreas Mohr <andi@lisas.de> Cc: Javi Merino <javi.merino@arm.com> Acked-and-tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Peter Feuerer <peter@piie.net> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-04acerhdf: Adding support for new modelsPeter Feuerer1-1/+24
added following new models: * Aspire 5755G * AO521 * AO751h * Aspire One 753 * Extensa 5420 * Aspire 5315 * Aspire 5739G * TravelMate TM8573T Cc: platform-driver-x86@vger.kernel.org Cc: Darren Hart <dvhart@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Mohr <andi@lisas.de> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Peter Feuerer <peter@piie.net> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-04acerhdf: Adding support for "manual mode"Peter Feuerer1-84/+102
Some Acer models require an additional command to turn off the fan after bios mode has been enabled. Adding new section in bios table to allow support for those models, by writing an extra "manual mode" register. Cc: platform-driver-x86@vger.kernel.org Cc: Darren Hart <dvhart@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Mohr <andi@lisas.de> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Peter Feuerer <peter@piie.net> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-03dell-smo8800: Add more ACPI ids and change description of driverPali Rohár2-4/+10
This patch adds other ACPI ids from Windows inf driver which should be handled by dell-smo8800 driver. ACPI devices have same structure -- one IRQ number. This patch also updates description of module. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-03platform: x86: dell-laptop: Add support for keyboard backlightPali Rohár1-6/+1049
This patch adds support for configuring keyboard backlight settings on supported Dell laptops. It exports kernel leds interface and uses Dell SMBIOS tokens or keyboard class interface. With this patch it is possible to set: * keyboard backlight level * timeout after which will be backlight automatically turned off * input activity triggers (keyboard, touchpad, mouse) which enable backlight * ambient light settings Settings are exported via sysfs: /sys/class/leds/dell::kbd_backlight/ Code is based on newly released documentation by Dell in libsmbios project. Thanks to Dan Carpenter who reported bug about unpredictable results in quirks->kbd_timeouts for loop. His fix adds needs_kbd_timeouts flag to quirk structure to indicate if kbd_timeouts array is empty or not. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Minor English corrections to comments. Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-03toshiba_acpi: Add keyboard backlight mode change eventAzael Avalos1-6/+8
A previous patch added support to handle more events. This patch adds support to update the sysfs group whenever we receive a 0x92 event, which indicates a change in the keyboard backlight mode, removing the update group code from toshiba_kbd_bl_mode_store, as it is no longer needed there. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-03toshiba_acpi: Change notify funtion to handle more eventsAzael Avalos1-34/+51
Currently the function toshiba_acpi_notify only takes care of hotkeys, however, the TOSXXXX devices receive more events that can be useful. This patch changes the function to be able to handle more events, and in the process, move all hotkey related code residing in it to a new function called toshiba_acpi_process_hotkeys. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-03toshiba_acpi: Move hotkey enabling code to its own functionAzael Avalos1-13/+27
The hotkey enabling code is being used by *_setup_keyboard and also by *_resume. This patch creates a new function called toshiba_acpi_enable_hotkeys to be used by these two functions to avoid duplicating code. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-03dell-wmi: Don't report keypresses on keybord illumination changeGabriele Mazzotta1-3/+8
Keyboard illumination level changes are performed by the BIOS, so no events should be reported on keypress. This is already done on systems using the legacy keymap, do it also for systems that don't use it. Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
2014-12-03dell-wmi: Don't report keypresses for radio state changesGabriele Mazzotta1-4/+2
The WMI events associated to KEY_WLAN are for all the radio devices available. Use KEY_RFKILL instead since it's more appropriate. The state of radio devices is changed directly by the BIOS when hotkeys are pressed, so no events should be reported. Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Merged two patches modifying this one line Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-03hp_wireless: Inform the user if hp_wireless_input_setup()/add() failsGiedrius Statkevicius1-0/+3
In hpwl_add() there is a unused variable err to which we assign the result of hp_wireless_input_setup() but we don't do anything depending on the result so print out a message that informs the user if add() (hp_wireless_input_setup()) fails since acpi_device_probe() doesn't print anything in this case. Signed-off-by: Giedrius Statkevicius <giedriuswork@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-03toshiba-acpi: Add missing ID (TOS6207)Ondrej Zary1-0/+1
toshiba-acpi was always missing TOS6207 ID so it did not load automatically on some laptops (such as Portege R100). But it worked fine if loaded manually. Commit 135740de7764 ("toshiba_acpi: Convert to use acpi_driver") broke that and the driver does not work even when loaded manually since then. Add TOS6207 ID to fix it. Tested on Toshiba Portege R100. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-03Sony-laptop: Deletion of an unnecessary check before the function call ↵Markus Elfring1-2/+1
"pci_dev_put" The pci_dev_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-03platform: x86: Deletion of checks before backlight_device_unregister()Markus Elfring9-20/+10
The backlight_device_unregister() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> For msi-wmi.c: Acked-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-03toshiba_acpi: Fix regression caused by backlight extra check codeAzael Avalos1-17/+4
Bug 86521 uncovered that some TOS6208 devices also return non zero values on a write call to the backlight method, thus getting caught and bailed out by the extra check code. This patch changes the set_lcd_brightness function to its "original" state by just adapting it to the new function format. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-03asus-nb-wmi: Add another wapf=4 quirkHans de Goede1-0/+9
Wifi on this laptop does not work unless asus-nb-wmi.wapf=4 is specified on the kerne commandline, add a quirk for this. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1173681 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-03hp_accel: Add support for HP ZBook 15Dominique Leuenberger1-0/+1
HP ZBook 15 laptop needs a non-standard mapping (x_inverted). BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=905329 Signed-off-by: Dominique Leuenberger <dimstar@opensuse.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-11-20intel_ips: fix a type in error messageMasatake YAMATO1-1/+1
Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-19dell-wmi: Update code for processing WMI eventsPali Rohár1-31/+128
The WMI buffer can contain multiple events. First value in buffer is length of event followed by data of specified length. After that is next length and next data. When length is zero then there is no more events in bufffer. This patch adds support for processing all events in buffer (not only first) and parse more event types (not only hotkey events). Because of variable length of events sometimes BIOS fills more hotkeys (or other values) into single WMI event. In this case this patch also processes these multiple hotkeys (and not only first one). Some event types are just ignored because kernel is not interested in them (e.g. NIC Link status, battery unplug, ...). This patch is based on DSDT table from Dell Latitude E6440. Code should be backward compatible so will process other events of old types same as before this patch. This patch also fixes a problem with unknown WMI event messages being written to the log. Now all known events are parsed and those which are not interesting to the kernel are dropped without an unknown WMI event message. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-11-19eeepc-laptop: clean up control flow in eeepc_acpi_notifyFrans Klaver1-27/+26
eeepc_acpi_notify increases the indentation level to a whopping four. If we revise the conditions a bit, we can reduce that to a more soothing two and satisfy the indentation guidelines in Documentation/CodingStyle. Remove an unwanted space while we're in the neighbourhood. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-11-19intel_ips: fix a comment typoChen Hanxiao1-1/+1
s/tempurature/temperature/ Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-11-19eeepc-laptop: don't assume get_acpi succeedsFrans Klaver1-2/+3
In eeepc_hotk_thaw, we assume that get_acpi() will effectively return a bool. However, it is possible that get_acpi() returns an error instead. We should not be writing error values to the ACPI device, even though it's quite possible that we couldn't contact the ACPI device in the first place. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-11-19eeepc-laptop: document fan_pwm conversionsFrans Klaver1-3/+13
eeepc_get_fan_pwm and eeepc_set_fan_pwm convert the PWM value read from the fan to a range lmsensors understands. Unfortunately this is only clear if you are familiar with how lmsensors handles duty cycles. Introduce two conversion functions that document the goal of these conversions. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-11-19eeepc-laptop: replace magic numbers with definesFrans Klaver1-6/+10
eeepc_[gs]et_fan_ctrl uses some magic numbers. These numbers mean something more than just the number. Describe them with macros instead of comments in one of the functions. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-11-19eeepc-laptop: define rfkill notifier nodes only onceFrans Klaver1-9/+13
The rfkill notifier node names are used in three different places. As a matter of style, it is better to store them somewhere and have the compiler warn us about typos in the function arguments. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-11-19eeepc-laptop: don't break user visible stringsFrans Klaver1-10/+7
As per Documentation/CodingStyle ch. 2, it is preferred that we don't break user visible strings, in order to allow users to grep for them. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-11-19eeepc-laptop: flatten control flowFrans Klaver1-44/+45
In eeepc_rfkill_hotplug there's an if statement with a big tail that ends right before the out_unlock label. We might as well invert the condition and jump to out_unlock in that case, pretty much like the rest of the code does. This removes an indentation level for a large chunk of code and also stops suggesting there might be an else clause. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-11-19drivers: platform: change 0x20 to I8042_STR_AUXDATA in i8042 filtersGiedrius Statkevičius3-3/+3
Instead of using a magic constant 0x20 in some drivers to get data only from the KBC port we should use the constant defined in i8042.h with the same value. Also, this makes these drivers uniform with what constant the only other filter function uses in drivers/input/misc/ideapad_slidebar.c. Signed-off-by: Giedrius Statkevičius <giedriuswork@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-11-10platform: hp_accel: Add SERIO_I8042 as a dependency since it now includes ↵Giedrius Statkevicius1-0/+1
i8042.h/serio.h Make hp_accel dependent on SERIO_I8042 in the Kconfig because since commit a4c724d0723b078e4ab4670e557cda1795036a7a ('platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream') hp_accel includes i8042.h and serio.h. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Giedrius Statkevičius <giedriuswork@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-11-07platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus streamGiedrius Statkevicius1-0/+44
Add a i8042 filter to hp_accel to remove accelerometer's data with acpi id HPQ6000 from keyboard bus stream. The codes sent by accelerometer are e0 25, e0 26, e0 27 and e0 28. The relevant information is already passed through /dev/freefall so no need to send these undocumented weird signals through the keyboard bus. Also, unclogs `dmesg` because atkbd complained about weird scan codes, saves processing power and disk space. Signed-off-by: Giedrius Statkevičius <giedriuswork@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-10-27quirk for Lenovo Yoga 3: no rfkill switchStephan Mueller1-0/+7
The Yoga 3 does not contain any physical rfkill switch. Therefore disable the rfkill switch identically to the Yoga 2 approach. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-10-27acer-wmi: Add acpi_backlight=video quirk for the Acer KAV80Hans de Goede1-0/+11
The acpi-video backlight interface on the Acer KAV80 is broken, and worse it causes the entire machine to slow down significantly after a suspend/resume. Blacklist it, and use the acer-wmi backlight interface instead. Note that the KAV80 is somewhat unique in that it is the only Acer model where we fall back to acer-wmi after blacklisting, rather then using the native (e.g. intel) backlight driver. This is done because there is no native backlight interface on this model. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1128309 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-10-27samsung-laptop: Add broken-acpi-video quirk for NC210/NC110Hans de Goede1-0/+10
The acpi-video backlight interface on the NC210 does not work, blacklist it and use the samsung-laptop interface instead. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=861573 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-10-27asus-nb-wmi: Add wapf4 quirk for the X550VBStanislaw Gruszka1-0/+9
X550VB as many others Asus laptops need wapf4 quirk to make RFKILL switch be functional. Otherwise system boots with wireless card disabled and is only possible to enable it by suspend/resume. Bug report: http://bugzilla.redhat.com/show_bug.cgi?id=1089731#c23 Reported-and-tested-by: Vratislav Podzimek <vpodzime@redhat.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-10-27toshiba_acpi: Add Toshiba TECRA A50-A to the alt keymap dmi listAaron Lu1-0/+6
As bug #72551, the Toshiba TECRA A50-A series models also come with the new keymap layout as found out by Azael Avalos, so add it to the dmi table. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=76971 Reported-and-tested-by: Blindekinder <rafael.raccuia@blindekinder.com> Cc: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-10-20platform: x86: drop owner assignment from platform_driversWolfram Sang22-23/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20platform: chrome: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-14thinkpad_acpi: replace strnicmp with strncasecmpRasmus Villemoes1-2/+2
The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-12Merge tag 'platform-drivers-x86-v3.18-1' of ↵Linus Torvalds5-369/+522
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: "The following have all spent at least a few days in linux-next, most for more than a week. These are mostly cleanups and error handling improvements with a few updates to extend existing support to newer hardware. Details: - dell-wmi: fix access out of memory - eeepc-laptop: cleanups, refactoring, sysfs perms, and improved error handling - intel-rst: ACPI and error handling cleanups - thinkpad-acpi: whitespace cleanup - toshiba_acpi: HCI/SCI interface update, keyboard backlight type 2 support, new scancodes, cleanups" * tag 'platform-drivers-x86-v3.18-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (23 commits) toshiba_acpi: Adapt kbd_bl_timeout_store to the new kbd type toshiba_acpi: Change HCI/SCI functions return code type toshiba_acpi: Unify return codes prefix from HCI/SCI to TOS toshiba_acpi: Rename hci_raw to tci_raw dell-wmi: Fix access out of memory eeepc-laptop: clean up control flow in *_rfkill_notifier eeepc-laptop: store_cpufv: return error if set_acpi fails eeepc-laptop: check proper return values in get_cpufv eeepc-laptop: make fan1_input really read-only eeepc-laptop: pull out SENSOR_STORE_FUNC and SENSOR_SHOW_FUNC macros eeepc-laptop: tell sysfs that the disp attribute is write-only eeepc-laptop: pull out ACPI_STORE_FUNC and ACPI_SHOW_FUNC macros eeepc-laptop: use DEVICE_ATTR* to instantiate device_attributes eeepc-laptop: change sysfs function names to API expectations eeepc-laptop: clean up coding style eeepc-laptop: simplify parse_arg() intel-rst: Clean up ACPI add function intel-rst: Use ACPI_FAILURE() macro instead !ACPI_SUCCESS() for error checking x86: thinkpad_acpi.c: fixed spacing coding style issue toshiba_acpi: Support new keyboard backlight type ...
2014-10-09Merge tag 'pm+acpi-3.18-rc1' of ↵Linus Torvalds1-9/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "Features-wise, to me the most important this time is a rework of wakeup interrupts handling in the core that makes them work consistently across all of the available sleep states, including suspend-to-idle. Many thanks to Thomas Gleixner for his help with this work. Second is an update of the generic PM domains code that has been in need of some care for quite a while. Unused code is being removed, DT support is being added and domains are now going to be attached to devices in bus type code in analogy with the ACPI PM domain. The majority of work here was done by Ulf Hansson who also has been the most active developer this time. Apart from this we have a traditional ACPICA update, this time to upstream version 20140828 and a few ACPI wakeup interrupts handling patches on top of the general rework mentioned above. There also are several cpufreq commits including renaming the cpufreq-cpu0 driver to cpufreq-dt, as this is what implements generic DT-based cpufreq support, and a new DT-based idle states infrastructure for cpuidle. In addition to that, the ACPI LPSS driver is updated, ACPI support for Apple machines is improved, a few bugs are fixed and a few cleanups are made all over. Finally, the Adaptive Voltage Scaling (AVS) subsystem now has a tree maintained by Kevin Hilman that will be merged through the PM tree. Numbers-wise, the generic PM domains update takes the lead this time with 32 non-merge commits, second is cpufreq (15 commits) and the 3rd place goes to the wakeup interrupts handling rework (13 commits). Specifics: - Rework the handling of wakeup IRQs by the IRQ core such that all of them will be switched over to "wakeup" mode in suspend_device_irqs() and in that mode the first interrupt will abort system suspend in progress or wake up the system if already in suspend-to-idle (or equivalent) without executing any interrupt handlers. Among other things that eliminates the wakeup-related motivation to use the IRQF_NO_SUSPEND interrupt flag with interrupts which don't really need it and should not use it (Thomas Gleixner and Rafael Wysocki) - Switch over ACPI to handling wakeup interrupts with the help of the new mechanism introduced by the above IRQ core rework (Rafael Wysocki) - Rework the core generic PM domains code to eliminate code that's not used, add DT support and add a generic mechanism by which devices can be added to PM domains automatically during enumeration (Ulf Hansson, Geert Uytterhoeven and Tomasz Figa). - Add debugfs-based mechanics for debugging generic PM domains (Maciej Matraszek). - ACPICA update to upstream version 20140828. Included are updates related to the SRAT and GTDT tables and the _PSx methods are in the METHOD_NAME list now (Bob Moore and Hanjun Guo). - Add _OSI("Darwin") support to the ACPI core (unfortunately, that can't really be done in a straightforward way) to prevent Thunderbolt from being turned off on Apple systems after boot (or after resume from system suspend) and rework the ACPI Smart Battery Subsystem (SBS) driver to work correctly with Apple platforms (Matthew Garrett and Andreas Noever). - ACPI LPSS (Low-Power Subsystem) driver update cleaning up the code, adding support for 133MHz I2C source clock on Intel Baytrail to it and making it avoid using UART RTS override with Auto Flow Control (Heikki Krogerus). - ACPI backlight updates removing the video_set_use_native_backlight quirk which is not necessary any more, making the code check the list of output devices returned by the _DOD method to avoid creating acpi_video interfaces that won't work and adding a quirk for Lenovo Ideapad Z570 (Hans de Goede, Aaron Lu and Stepan Bujnak) - New Win8 ACPI OSI quirks for some Dell laptops (Edward Lin) - Assorted ACPI code cleanups (Fabian Frederick, Rasmus Villemoes, Sudip Mukherjee, Yijing Wang, and Zhang Rui) - cpufreq core updates and cleanups (Viresh Kumar, Preeti U Murthy, Rasmus Villemoes) - cpufreq driver updates: cpufreq-cpu0/cpufreq-dt (driver name change among other things), ppc-corenet, powernv (Viresh Kumar, Preeti U Murthy, Shilpasri G Bhat, Lucas Stach) - cpuidle support for DT-based idle states infrastructure, new ARM64 cpuidle driver, cpuidle core cleanups (Lorenzo Pieralisi, Rasmus Villemoes) - ARM big.LITTLE cpuidle driver updates: support for DT-based initialization and Exynos5800 compatible string (Lorenzo Pieralisi, Kevin Hilman) - Rework of the test_suspend kernel command line argument and a new trace event for console resume (Srinivas Pandruvada, Todd E Brandt) - Second attempt to optimize swsusp_free() (hibernation core) to make it avoid going through all PFNs which may be way too slow on some systems (Joerg Roedel) - devfreq updates (Paul Bolle, Punit Agrawal, Ãrjan Eide). - rockchip-io Adaptive Voltage Scaling (AVS) driver and AVS entry update in MAINTAINERS (Heiko Stübner, Kevin Hilman) - PM core fix related to clock management (Geert Uytterhoeven) - PM core's sysfs code cleanup (Johannes Berg)" * tag 'pm+acpi-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (105 commits) ACPI / fan: printk replacement PM / clk: Fix crash in clocks management code if !CONFIG_PM_RUNTIME PM / Domains: Rename cpu_data to cpuidle_data cpufreq: cpufreq-dt: fix potential double put of cpu OF node cpufreq: cpu0: rename driver and internals to 'cpufreq_dt' PM / hibernate: Iterate over set bits instead of PFNs in swsusp_free() cpufreq: ppc-corenet: remove duplicate update of cpu_data ACPI / sleep: Rework the handling of ACPI GPE wakeup from suspend-to-idle PM / sleep: Rename platform suspend/resume functions in suspend.c PM / sleep: Export dpm_suspend_late/noirq() and dpm_resume_early/noirq() ACPICA: Introduce acpi_enable_all_wakeup_gpes() ACPICA: Clear all non-wakeup GPEs in acpi_hw_enable_wakeup_gpe_block() ACPI / video: check _DOD list when creating backlight devices PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h cpufreq: Replace strnicmp with strncasecmp cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec cpufreq: powernv: Set the pstate of the last hotplugged out cpu in policy->cpus to minimum cpufreq: Allow stop CPU callback to be used by all cpufreq drivers PM / devfreq: exynos: Enable building exynos PPMU as module PM / devfreq: Export helper functions for drivers ...
2014-10-09Merge tag 'gpio-v3.18-1' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
2014-10-07Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull "trivial tree" updates from Jiri Kosina: "Usual pile from trivial tree everyone is so eagerly waiting for" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Remove MN10300_PROC_MN2WS0038 mei: fix comments treewide: Fix typos in Kconfig kprobes: update jprobe_example.c for do_fork() change Documentation: change "&" to "and" in Documentation/applying-patches.txt Documentation: remove obsolete pcmcia-cs from Changes Documentation: update links in Changes Documentation: Docbook: Fix generated DocBook/kernel-api.xml score: Remove GENERIC_HAS_IOMAP gpio: fix 'CONFIG_GPIO_IRQCHIP' comments tty: doc: Fix grammar in serial/tty dma-debug: modify check_for_stack output treewide: fix errors in printk genirq: fix reference in devm_request_threaded_irq comment treewide: fix synchronize_rcu() in comments checkstack.pl: port to AArch64 doc: queue-sysfs: minor fixes init/do_mounts: better syntax description MIPS: fix comment spelling powerpc/simpleboot: fix comment ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 17:30:22 +0000