summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2010-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds1-1/+7
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (220 commits) USB: backlight, appledisplay: fix incomplete registration failure handling USB: pl2303: remove unnecessary reset of usb_device in urbs USB: ftdi_sio: remove obsolete check in unthrottle USB: ftdi_sio: remove unused tx_bytes counter USB: qcaux: driver for auxiliary serial ports on Qualcomm devices USB: pl2303: initial TIOCGSERIAL support USB: option: add Longcheer/Longsung vendor ID USB: fix I2C API usage in ohci-pnx4008. USB: usbmon: mask seconds properly in text API USB: sisusbvga: no unnecessary GFP_ATOMIC USB: storage: onetouch: unnecessary GFP_ATOMIC USB: serial: ftdi: add CONTEC vendor and product id USB: remove references to port->port.count from the serial drivers USB: tty: Prune uses of tty_request_room in the USB layer USB: tty: Add a function to insert a string of characters with the same flag USB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_configuration() USB: tty: kill request_room for USB ACM class USB: tty: sort out the request_room handling for whiteheat USB: storage: fix misplaced parenthesis USB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., devices and spectrometers ...
2010-03-03Merge branch 'for-linus' of ↵Linus Torvalds1-34/+5
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (23 commits) firewire: ohci: extend initialization log message firewire: ohci: fix IR/IT context mask mixup firewire: ohci: add module parameter to activate quirk fixes firewire: ohci: use an ID table for quirks detection firewire: ohci: reorder struct fw_ohci for better cache efficiency firewire: ohci: remove unused dualbuffer IR code firewire: core: combine a bit of repeated code firewire: core: change type of a data buffer firewire: cdev: increment ABI version number firewire: cdev: add more flexible cycle timer ioctl firewire: core: rename an internal function firewire: core: fix an information leak firewire: core: increase stack size of config ROM reader firewire: core: don't fail device creation in case of too large config ROM blocks firewire: core: fix "giving up on config rom" with Panasonic AG-DV2500 firewire: remove incomplete Bus_Time CSR support firewire: get_cycle_timer optimization and cleanup firewire: ohci: enable cycle timer fix on ALi and NEC controllers firewire: ohci: work around cycle timer bugs on VIA controllers firewire: make PCI device id constant ...
2010-03-02USB: Push BKL on open down into the driversOliver Neukum1-1/+7
Straightforward push into the drivers to allow auditing individual drivers separately Signed-off-by: Oliver Neukum <oliver@neukum.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-28Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller258-4589/+25548
Conflicts: drivers/firmware/iscsi_ibft.c
2010-02-26Merge branch 'v4l_for_linus' of ↵Linus Torvalds252-4583/+25533
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits) V4L-DVB: cx88-dvb: remove extra attribution for core V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index V4L/DVB: Add support for SMT7020 to cx88 V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix V4L/DVB: gspca_stv06xx: Add support for camera button V4L/DVB: gspca_ov519: add support for the button on ov511 based cams V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams V4L/DVB: gspca_ov519: add support for the button on ov519 based cams V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set V4L/DVB: gspca_main: some input error handling fixes V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs V4L/DVB: gspca_pac7302: much improved exposure control V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls V4L/DVB: Documentation: gspca.txt: update known mr97310a cams V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480 V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl ...
2010-02-26dvb-core: Fix DoS bug in ULE decapsulation code that can be triggered by an ↵Ang Way Chuang1-0/+1
invalid Payload Pointer ULE (Unidirectional Lightweight Encapsulation RFC 4326) decapsulation has a bug that causes endless loop when Payload Pointer of MPEG2-TS frame is 182 or 183. Anyone who sends malicious MPEG2-TS frame will cause the receiver of ULE SNDU to go into endless loop. This patch was generated and tested against linux-2.6.32.9 and should apply cleanly to linux-2.6.33 as well because there was only one typo fix to dvb_net.c since v2.6.32. This bug was brought to you by modern day Santa Claus who decided to shower the satellite dish at Keio University with heavy snow causing huge burst of errors. We, receiver end, received Santa Claus's gift in the form of kernel bug. Care has been taken not to introduce more bug by fixing this bug, but please scrutinize the code for I always produces buggy code. Signed-off-by: Ang Way Chuang <wcang79@gmail.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-26V4L-DVB: cx88-dvb: remove extra attribution for coreMauro Carvalho Chehab1-2/+0
This is not needed, since the function already do it. Also, it causes a warning at the compilation, since a new var is declared in the middle of the code. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] indexBaruch Siach1-1/+2
When code <= V4L2_MBUS_FMT_FIXED soc_mbus_get_fmtdesc returns a pointer to mbus_fmt[x], where x < 0. Fix this. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: Add support for SMT7020 to cx88Dirk Herrendoerfer4-0/+243
This patch adds support for the built-in dvb device of a Samsung SMT7020s (x86 based STB) to the cx88 family. Signed-off-by: Dirk Herrendoerfer <d.herrendoerfer@herrendoerfer.name> Signed-off-by: Helmut Auer <helmut@helmutauer.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: radio-si470x: Use UTF-8 encoding on a commentTobias Lorenz1-1/+1
This cosmetic patch corrects a wrong unicode "micro" character in a comment. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_stv06xx: Add support for camera buttonHans de Goede1-1/+28
Only tested with an stv6422 based cam, as that is the only stv06xx cam I have with a button. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_ov519: add support for the button on ov511 based camsHans de Goede1-5/+17
Due to hardware limitations this only works while the camera is streaming. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_ov519: Add support for the button on ov518 based camsHans de Goede1-25/+29
Due to hardware limitations this only works while the camera is streaming. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_ov519: add support for the button on ov519 based camsHans de Goede1-0/+62
Note due to hardware limitiations (no interrupt endpoint), this only works when the camera is streaming. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not setHans de Goede1-1/+3
gspca_main: Fix a compile error when CONFIG_INPUT is not set. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_main: some input error handling fixesHans de Goede1-9/+10
2 small changes to input device error handling: 1) Make it fatal when we fail to create an input device (it is either this or add checks for gspca_dev->input_dev being NULL in a lot of places) 2) Since we allow gspca_input_create_urb() to fail everywhere we call it, and thus never check its return value, make it void. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputsHans de Goede2-1/+4
Allow use of the gspca core input device creation code by subdrivers which have non interrupt driven camera buttons. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_pac7302: much improved exposure controlHans de Goede2-60/+54
My experience with fixing up the controls for the PAS sensors in sonixb, has lead me to re-investigate the exposure control for the pac7302. I've now found a regular exposure register in register bank 3 (which seems to be the sensor registers bank), and with this added a proper fine grained exposure control. This patch also updates the do_autogain function to work properly with this new finer grained control. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 camerasHans de Goede2-4/+8
Make the sonixb driver handle pas106 and pas202 cameras, when both it and the sn9c102 driver are enabled in the kernel configuration. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrlsHans de Goede1-21/+80
Fixup brightness ctrl and add gain and exposure ctrls for PAS106B sensors, this allows enabling autogain (done), and makes the cam usable in low light conditions. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: Documentation: gspca.txt: update known mr97310a camsHans de Goede1-2/+2
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPixTheodore Kilgore1-20/+177
This camera has a sensor type we did not support sofar, this patch adds support for the new sensor type found in the Sakar 1638x CyberPix. Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480Hans de Goede1-4/+5
In 640x480, if the reg11 has less than 4, the image is unstable (the bridge goes into a higher compression mode which we have not reverse engineered yet). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and ↵Hans de Goede1-48/+122
exposure ctrls Fixup brightness ctrl and add gain and exposure ctrls for PAS202BCB sensors, this allows enabling autogain (done), and makes the cam usable in low light conditions. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine ↵Hans de Goede3-38/+193
expo ctrl Some sensors only allow controlling the exposure by changing the clockdiv, which means that exposure takes pretty large jumps (for example when going from a div of 1 to 2, the exposure doubles). Use 2 different entries in the controls array for these 2 different types of exposure (always disabling one), and; Add a new autogain algorithm for the coarse exposure case, which normally changes the gain setting, only touching the exposure setting if the desired luminance cannot be reached with gain, and after an exposure change once more first tries gain, etc. Thus avoiding exposure changes, and the resulting oscilation because of the huge steps these exposure controls take. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixb: leave bridge gain at 1.0 when we have a sensor gainHans de Goede1-12/+14
Leave bridge gain at 1.0 when we have a sensor gain, while at it also change the bridge gain setting code to write both registers in one go saving us a usb transaction. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixj: Add camera button supportHans de Goede1-3/+30
gspca_sonixj: Add camera button support Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixb: Add support for camera buttonHans de Goede1-0/+23
gspca_sonixb: Add support for camera button Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa_zc3xx: Add support for camera buttonHans de Goede1-0/+20
gscpa_zc3xx: Add support for camera button Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa_pac7311: Add support for camera buttonHans de Goede1-0/+35
gscpa_pac7311: Add support for camera button Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa_pac207: Add support for camera buttonHans de Goede1-0/+23
gscpa_pac207: Add support for camera button Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sq905c: Add an additional USB-IDHans de Goede1-0/+1
gspca_sq905c: Add an additional USB-ID Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_mr97310a: Simplify sensor detectionTheodore Kilgore1-13/+10
Simplify sensor detection a bit (share more of the code between cif and vga cameras). Also remove an unnecessary write from zero_the_pointer(). Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: ivtv: Tweak Sony GigaPocket Kikyou card entry based on experimentsAndy Walls1-15/+8
Based on experiments by Eric Wescott, edit the Sony GigaPocket (Kikyou) card entry video and audio mux settings. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: ivtv: Add initial entry for Sony VAIO Giga Pocket (Kikyou) cardsEric Anderson3-1/+59
This is a slightly modified version of Eric Anderson's original patch for the Sony Giga Pocket board. It has been updated to apply to the latest ivtv driver version by Hans Verkuil <hverkuil@xs4all.nl> and Andy Walls <awalls@radix.net>. Also Andy Walls modified the patch to use a new Sony BTF-Pnx01Z tuner entry based on Eric Anderson's experimental findings for the bandswitch. >From Eric Anderson's original email: 1. The tuner on the card doesn't seem to match any standard ones. I modified an existing tuner entry. Ideally a new tuner entry should be created. (The only difference from the one I modified is that the low-to-mid range frequency cut-off is slightly different, as are the bit config settings.) 2. It wasn't obvious how to choose a second audio input other than using "radio" as an option. Basically there's two GPIO audio inputs. Using radio allowed me to avoid major restructuring to the code. (perhaps other cards don't have this often...) 3. It's not clear that there's a mute setting that works. Not sure why. 4. I haven't had a chance to test the two Svideo inputs. I set them to COMPOSITE1 and SVIDEO2, but I'm not sure those are the correct settings. The standard composite video inputs seem to work. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: tuner-types: Add Sony BTF-Pxn01Z tuner type used on GigaPocket cardsAndy Walls1-0/+21
Sony makes custome tuners for its GigaPocket line of ivtv based capture cards. This adds an entry to the tuner-types list for such tuners. Parameters are based on experiments by Eric Anderson <rico99@sbcglobal.net>. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: ivtv: Fix ivtv_api_get_data() to avoid unneeded IO during IRQ handlingAndy Walls4-10/+13
ivtv_api_get_data() was performing more PCI MMIO than needed, resulting often in it accounting for more than half the total time spent in ivtv_irq_handler(). Now it only reads at most 7 of the 16 mailbox data words over the PCI bus, and in some instances only 2 or 3 data words as needed. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: V4L - vpfe capture - build environment for isif driverMurali Karicheri2-1/+14
Adding Makefile and Kconfig for ISIF driver Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: V4L - vpfe capture - vpss driver enhancements for DM365Murali Karicheri1-54/+235
Enhancements to support DM365 ISP5 and VPSS module configuration. Also cleaned up the driver by removing redundant variables. Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: V4L - vpfe capture - source for ISIF driver on DM365Murali Karicheri1-0/+1172
This is the source file for ISIF driver on DM365. ISIF driver is equivalent to CCDC driver on DM355 and DM644x. This driver is tested for YUV capture from TVP514x driver. This patch contains the header files required for this driver. Reviewed-by: Nori, Sekhar <nsekhar@ti.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: V4L - vpfe capture - header files for ISIF driverMurali Karicheri1-0/+269
This is the header file for ISIF driver on DM365. ISIF driver is equivalent to CCDC driver on DM355 and DM644x. This driver is tested for YUV capture from TVP514x driver. This patch contains the header files required for this driver. Reviewed-by: Nori, Sekhar <nsekhar@ti.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: pvrusb2: Adjust 300msec digitizer wait to be more selectiveMike Isely1-4/+9
We know that the 300msec settling time after starting the digitizer is only really needed when the digitizer is a SAA7115. So if we're not using a SAA7115, skip the delay. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: pvrusb2: Reduce encoder quiet periodMike Isely1-4/+2
After implementing a 300msec wait between digitizer start and encoder start, it has been determined that we don't need to wait quite as long before configuring the encoder. This reduces the wait period from 100msec back to 50msec. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: pvrusb2: Enforce a 300msec stabilization interval during stream strartMike Isely3-5/+49
Martin Dauskardt <martin.dauskardt@gmx.de> has determined that the encoder has a much better chance of starting cleanly if we deliberately hold off starting it util the video digitizer has had a chance to run for at least 300msec first. These changes implement an enforced 300msec wait in the state machine that orchestrates streaming start / stop. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: saa7115: fix saa7111a supportHans Verkuil2-14/+19
When the saa7111 driver was merged into saa7115 several bugs were introduced, in particular with the saa7111a support as is used in the mxb.c driver. This patch fixes the saa7111a support. This was tested with the mxb driver. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: saa7146_vv: fix regression where v4l2_device was registered too lateHans Verkuil4-7/+21
v4l2_device_register needs to be called before the i2c subdevs are loaded. However, it was called afterwards in the saa7146 driver. This caused an oops when loading the mxb and hexium drivers. The vv_init function is now split into two: one registers the v4l2_device, the other does the rest of the initialization. The three drivers that depend on this have been updated to call the new vv_devinit function. Thanks to Michael Hunold for reporting this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: uvcvideo: Check uvc_ctrl_begin return value in VIDIOC_S_CTRLLaurent Pinchart1-1/+1
The function return value wasn't checked due to a missing variable assignment. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: uvcvideo: Blacklist gain control for Asus EeePC T91 integrated webcamLaurent Pinchart1-0/+1
The Asus EeePC T91 integrated webcam exposes a gain control in the processing unit but stalls when the control is queried. Blacklist the gain control for that camera. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: uvcvideo: Clamp control values to the minimum and maximum valuesLaurent Pinchart2-4/+45
When setting a control, the V4L2 specification requires drivers to either clamp the control value to the [minimum, maximum] range or return the -ERANGE error. Fix the driver to clamp control values to the valid range in uvc_ctrl_set() and make sure the value differs from the minimum by an integer multiple of step. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: uvcvideo: Cache control min, max, res and def query resultsLaurent Pinchart2-49/+74
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 16:23:53 +0000