summaryrefslogtreecommitdiff
path: root/drivers/media/dvb
AgeCommit message (Collapse)AuthorFilesLines
2007-05-09V4L/DVB (5578): Workaround for bad hardare/firmware on some pluto2 devicesholger@muscate-magnussen.de1-0/+8
pluto2_driver: Workaround for pluto2 card reporting wrong number of received packets and flooding system with interrupts. This patch constitutes a workaround for a hardware/firmware problem of the pluto2-based card (e.g., Satelco EasyWatch). It can happen in rare cases that the card gets into a mode where it always reports back a number of received packets (nbpackets) which is larger than the maximum permissible number of packets (TS_DMA_PACKETS). The workaround that is already in the driver in function pluto_dma_end reports back zero received packets. In spite of the (in reality) zero received packets the card continues to generate interrupts at a very high rate, which can effectively stall the system. The patch resets the TS logic, which puts the card back into normal operations. Signed-off-by: Holger Magnussen <holger@muscate-magnussen.de> Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap5-5/+0
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds1-1/+1
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (59 commits) PCI: Free resource files in error path of pci_create_sysfs_dev_files() pci-quirks: disable MSI on RS400-200 and RS480 PCI hotplug: Use menuconfig objects PCI: ZT5550 CPCI Hotplug driver fix PCI: rpaphp: Remove semaphores PCI: rpaphp: Ensure more pcibios_add/pcibios_remove symmetry PCI: rpaphp: Use pcibios_remove_pci_devices() symmetrically PCI: rpaphp: Document is_php_dn() PCI: rpaphp: Document find_php_slot() PCI: rpaphp: Rename rpaphp_register_pci_slot() to rpaphp_enable_slot() PCI: rpaphp: refactor tail call to rpaphp_register_slot() PCI: rpaphp: remove rpaphp_set_attention_status() PCI: rpaphp: remove print_slot_pci_funcs() PCI: rpaphp: Remove setup_pci_slot() PCI: rpaphp: remove a call that does nothing but a pointer lookup PCI: rpaphp: Remove another wrappered function PCI: rpaphp: Remve another call that is a wrapper PCI: rpaphp: remove a function that does nothing but wrap debug printks PCI: rpaphp: Remove un-needed goto PCI: rpaphp: Fix a memleak; slot->location string was never freed ...
2007-05-02PCI: Cleanup the includes of <linux/pci.h>Jean Delvare1-1/+1
I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-01i2c: Shrink struct i2c_clientDavid Brownell3-4/+5
This shrinks the size of "struct i2c_client" by 40 bytes: - Substantially shrinks the string used to identify the chip type - The "flags" don't need to be so big - Removes some internal padding It also adds kerneldoc for that struct, explaining how "name" is really a chip type identifier; it's otherwise potentially confusing. Because the I2C_NAME_SIZE symbol was abused for both i2c_client.name and for i2c_adapter.name, this needed to affect i2c_adapter too. The adapters which used that symbol now use the more-obviously-correct idiom of taking the size of that field. JD: Shorten i2c_adapter.name from 50 to 48 bytes while we're here, to avoid wasting space in padding. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-04-27V4L/DVB (5558): Opera: use 7-bit i2c addressesMarco Gittler2-31/+49
- the tuner i2c addr now without define (as wanted). - now 7 bit addr are used (the power_ctrl fkt ist ok so, because this is a raw write) - the addr >> 1 , addr << 1 is ok so, i think beause the read write is now taken from the last bit. - now i have no datasheet for the device, all taken from usb-logs Signed-off-by: Marco Gittler <g.marco@freenet.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5544): Budget-av: Make inversion setting configurable, add KNC ONE ↵Hartmut Birr3-10/+19
V1.0 card Make the inversion setting configurable. The KNC ONE V1.0 uses non inverted setting for the inversion and add the KNC ONE V1.0 card. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5543): Tda10023: Add support for frontend TDA10023Hartmut Birr9-38/+670
Add support for the frontend TDA10023 and add cards that need the tda10023. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Georg Acher <acher@in.tum.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5542): Budget-av: Remove polarity switching of the clock for DVB-CHartmut Birr4-67/+36
Remove the polarity switching of the clock for the DVB-C cards in budget-av.c. This hack is no longer necessary because the saa7146 can do the job to remove the additional FEC bytes from the TS. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5532): Add support for Opera S1- DVB-USBMarco Gittler7-0/+612
This patch adds support for DVB-Opera S1 USB 2.0 BOX. Signed-off-by: Marco Gittler <g.marco@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5513): Bt878: prevent probing wrong card entryAkinobu Mita1-3/+1
I got strange message when I did modprobe bt878: bt878_probe: card id=[0x0],[ <NULL> ] has DVB functions. The card_list array is terminated by sentinel entry. But this list is traversed by: for (i = 0, dvb_cards = card_list; i < ARRAY_SIZE(card_list); i++, dvb_cards++) { ... } in bt878_probe(). So this loop checks dummy sentinel entry, too. This patch removes unnecessary sentinel entry. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5512): Fix 3/3 for bug 7819: fixed hotplugging for dvbnetMarkus Rechberger4-4/+32
fixed hotplugging for dvbnet Signed-off-by: Michal CIJOML Semler <cijoml@volny.cz> Signed-off-by: Markus Rechberger <markus.rechberger@amd.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5511): Fix 2/3 for bug 7819: demux and dvrMarkus Rechberger5-7/+67
fixing hotplug issue for demux[n] and dvr[n] Signed-off-by: Michal CIJOML Semler <cijoml@volny.cz> Signed-off-by: Markus Rechberger <markus.rechberger@amd.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5510): Fix 1/3 for bug 7819: fixed frontend hotplug issueMarkus Rechberger3-2/+17
fixed frontend hotplug issue Signed-off-by: Michal CIJOML Semler <cijoml@volny.cz> Signed-off-by: Markus Rechberger <markus.rechberger@amd.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5505): Fix Kernel Bugzilla #8301: spinlock fix for flexcop-pciHendrik Borghorst1-4/+5
If you modprobe the b2c2-flexcop-pci module you got a hardlock of your system. This is due the usage of spin_lock before spin_lock_init is called. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5494): Lgdt330x: Fix some warningsTrent Piepho1-2/+2
It's KERN_WARNING "lgdt....", not "KERN_WARNING lgdt...." Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5485): Tda827x: delayed probing of tuner versionHartmut Hackmann1-32/+53
When the tuner is attached, the tda10046 is not initilized yet, so it is searching for its firmware. If the tuner is attached to the tda10046 silent i2c port, a bus collision can occur. Now the version is probed during the first init or sleep call. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5459): M920x: add support for Anubis Electronics / MSI Digi Vox Mini IIPierre Willenbrock2-1/+84
Add support for Anubis Electronics "Lifeview" (USB-ID: 0x10fd:0x1513) Signed-off-by: Pierre Willenbrock <pierre@pirsoft.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5458): Tda1004x: add ts_mode option to config structHartmut Hackmann2-2/+17
The struct tda1004x_config has a new entry: .ts_mode Possible values are TDA10046_TS_PARALLEL or TDA10046_TS_SERIAL There always is only one interface active, default is parallel. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5457): Dvb-pll: Replace sleep function with a more capable oneTrent Piepho2-30/+26
The dvb-pll sleep function could only send a 2-byte sequence to the PLL. This isn't enough in some cases, for example fmd1216me will need to send a 4-byte command to set both BB and AB to the correct values. Instead of using a fake band with a frequency of 0 to store the sleep data (which has room for only two bytes), the new sleep function works like the init function. A new pointer is added to the pll description, and when non-NULL points to a buffer with the length and data to send. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5456): Dvb-pll: Move IF frequency from per-band data to per-tuner dataTrent Piepho2-105/+124
The IF frequency was specified for each band, but it's not something that changes from band to band. None of the tuner definitions had a different IF frequency (called offset) from one band to another. Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5455): Dvb-pll: Adjust rounding to be consistentTrent Piepho1-73/+75
Some PLLs had one half the step size added to the offset, so that the divisor would be rounded to the nearest integer. Some didn't and so would always be rounded down. This makes dvb-pll round to the nearest when calculating the divisor, without the offset needing to be fudged. PLLs that had a fudged offset have the offset changed to be just the IF frequency. The satellite PLL dvb_pll_philips_sd1878_tda8261 was rounding up for some reason, and I've kept it that way. In addition, frequencies that were rounded to the nearest kHz are extended to full Hz resolution. One sixth MHz step sizes that were listed as 166,666 Hz are changed to 166,667 Hz, which is slightly closer. PLLs that were already rounding: dvb_pll_tda665x, offset was 36 1/6 (to nearest kHz) + step/2 dvb_pll_fmd1216me, offset was 36 1/8 (to two digits) + step/2 dvb_pll_thomson_fe6600, offset was 36 1/8 (to two digits) + step/2 dvb_pll_env57h1xd5, offset was 36 1/8 + step Note that the last PLL, dvb_pll_env57h1xd5, appears to have had a bug in the offset. Rather than adding stepsize/2, it was adding a full stepsize. The PLL definition originally came from the dibusb driver, which used 36 1/8 + step/2. The change to 36 1/8 + step was probably a mistake added when the tuner was converted to dvb-pll. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5449): M920x: add error messages for debugging purposesPierre Willenbrock1-2/+8
Signed-off-by: Pierre Willenbrock <pierre@pirsoft.dnsalias.org> Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5448): M920x: rename megasky_identify_state to m920x_identify_stateAapo Tahkola1-5/+5
This function should work for all m920x-based devices. Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5440): Dvb-ttpci: Infrared remote initialization fixOliver Endriss1-1/+1
Fix bug introduced during infrared refactoring. Thanks to Johann Friedrichs for spotting this. Thanks-to: Johann Friedrichs <johann.friedrichs@web.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5428): M920x: Detect zero-length I2C messages and fix a typoTrent Piepho1-2/+7
Change a 00 to just 0 Detect zero-length I2C messages and return not supported. I think I know how to send one, but the problem is getting the slave's ack. The only point of a zero-length message is for probing; too see if the slave will ack its address. Since we don't know how to get the ack, we can't support zero-length messages in a useful way, so it's probably best to just return not supported for them. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5427): M920x: Improve I2C operationsTrent Piepho2-33/+47
Write some better documentation about what might be known about how the m920x I2C works, since a datasheet is lacking. The I2C xfer function should now handle more types of I2C transactions than it could before. Those it can't, will return error codes instead of being executed incorrectly. Multi-byte reads were not being done correctly, which should be fixed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5426): M920x: remove unneeded codeAapo Tahkola1-1/+0
Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5425): M920x: rework driver code to allow for different devicesAapo Tahkola1-23/+28
Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5424): Fix i2c implementation for gl861 and au6610Aapo Tahkola2-6/+6
- r/w bit is not part of the i2c address Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5423): M920x: i2c cleanupsAapo Tahkola2-50/+51
- Implement m920x i2c as suggested by Pierre Willenbrock - remove "magic" hack - r/w bit is not part of the i2c address - move hardware remarks to header file Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5381): Dvb-ttpci: Update frontend lock status in transfer mode (bugfix)Oliver Endriss1-1/+3
In transfer/replay mode the frontend lock status was never updated. This caused a 'black screen' if VDR switched from transfer mode to live mode on the same transponder. Thanks to Marco Schluessler for spotting the problem. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5374): Or51132: refactor i2c code, improve error resilienceTrent Piepho1-178/+127
The code the i2c transactions was leftover from the old V4L-based ATSC driver. It did too little with too much code. It is re-written to remove unnecessary parameters and be more efficient. A demod register can now be read with one function call, instead of repeating a dozen line block of code each time. There were msleep()'s, which appear to be unnecessary, spread around all the I2C transactions. These have been removed. Reading SNR used to take about 130 ms, now it's down to 1.8 ms. Reads from the demodulator's registers do not return correct results sometimes. Adding or removing the delays in the I2C transactions did not appear to effect the probability of failure. If anything, the transactions without delays were less likely to fail, but since far more transactions could be made per second the number of failures per hour was greater. To increase reliability, the SNR and get_params functions will now retry once if they get bad data back. This appears to have reduced the probability of failure to effectively zero. Some error messages are cleaned up or given KERN_* levels when they were missing. or51132_setmode() wasn't returning correct error codes, which is fixed as well. CC: Rusty Scott <rustys@ieee.org> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5373): [PATCH] Hauppauge Nova-T endianess problem on powerpcDennis Ranke2-5/+1
When trying to use a Hauppauge Nova-T Stick on a big-endian architecture (such as powerpc) no frontend can be attached. The attached patch fixes this problem by removing two lines in dib0700_ctrl_rd() that try to correct the endianess on two values that already are correct: - /* think about swapping here */ - value = le16_to_cpu(value); - index = le16_to_cpu(index); With this simple patch this dvb hardware works great, thanks to anyone involved for the good work. :) Signed-off-by: Dennis Ranke <mail@exoticorn.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5371): [PATCH] Pinnacle PCTV Sat Pro USB (450e) support by ttusb2.c ↵Christophe Cattelain3-2/+8
(400e driver) Added USB_PID_PCTV_450E to the 'usb_device_id ttusb2_table' and an entry in the .devices table. The 400e driver now supports the 'Pinnacle PCTV Sat Pro USB (450e)' with USB_ID 2304:0222. Signed-off-by: Christophe Cattelain <xof@skynet.be> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5369): Fixed 1 byte too short buffer in tda827x.cHartmut Hackmann2-2/+3
- The i2c data buffer in tda827xa_set_params was 1 byte too short - saa7134-dvb now gives an error mesage if tda827x could not be attached - coding style fix in tda1004x.c Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5363): Dvb: Remove lgh06xf driverTrent Piepho12-187/+8
The code of the dvb-pll driver and the lgh06xf driver is nearly identical. The main difference is that the lgh06xf driver would set the AGC TOP value on every tune call. The dvb-pll driver now has the ability to set the AGC TOP when the front-end device is opened, which is a better way to go about it. By using this ability of dvb-pll, the lgh06xf driver is made unnecessary. There is one other difference. dvb-pll will probe for the presence of an I2C pll chip by doing a one byte read, the lgh06xf driver did not do this. In some devices the PLL is not reachable over I2C at the timer the tuner is attached. Some more initialization, such as firmware loading, must take place first. None of the devices using a LG-H06xF should have this problem. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5362): Dvb-pll: add code for doing tuner initializationTrent Piepho2-0/+40
Some tuners need or benefit from initialization, to change certain settings from their power on default values. Typically, tuners with TUA603x PLLs can benefit from setting the AGC TOP value to something else. This patch includes code to set the AGC TOP to 103 dBuV for the Thomson DTT-761x tuners, which I have experimentally verified gives the best SNR readings, increasing SNR by about 0.19 dB over the default value. Other tuners can make use of this as well. For example, the separate LG TDVS-H06xF driver's only difference from dvb-pll is this same setting of AGC TOP value. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5361): Dvb-pll: Fix Kconfig files and allow dvb-pll to be optionalTrent Piepho6-7/+20
A number of drivers selected DVB_PLL when they did not need it, and some that did need it did not select it. The DVB_PLL option is given a name and help text, so that it will show up in the config menu. DVB_PLL support can be turned on if an out-of-tree driver needs it. The standard dvb fe customization support is added to dvb-pll.h. Since all modules which select DVB_PLL do so unconditionally, it is not possible to turn dvb-pll off when an enabled module selects it, unlike most of the other frontend/tuner drivers. This is because the users of dvb-pll have static references to dvb-pll symbols other than the attach function. If these references are removed, then dvb-pll will be disablable as the other frontend/tuner drivers are. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5360): Dvb-pll: Use sizeof() to get name lengthTrent Piepho1-1/+2
Better to use sizeof() to get the size of the output buffer for the tuner name, instead of just hard coding 128. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5344): Dvb-ttpci: Support for MSC_RAW and MSC_SCAN RC eventsOliver Endriss1-0/+7
Support for MSC_RAW and MSC_SCAN remote control events. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5335): Budget-ci: Use the repeat handling of the input subsystemDavid Härdeman1-59/+37
The attached patch contains the last set of changes to the budget-ci IR handling which makes it use the repeat handling of the input subsystem. This allows some code simplification, makes sure that repeat key presses are reported as such and also allows the "debounce" hack to be removed altogether. In addition a couple of static variables were removed which would have confused the IR code if more than one card is used. Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5334): Dvb-ttpci: Infrared remote control refactoringOliver Endriss3-134/+265
Infrared remote control support rewritten. Now each device provides its own event device, keymap, protocol, inversion and address setting. EVIOCGKEYCODE and EVIOCSKEYCODE ioctls are supported to read/modify a keymap. Keymaps may be loaded using - input tools (keyb etc.) - av7110_loadkeys (obsolete, for backward compatibility) New command line parameters: - ir_protocol: select infrared protocol: 0 RC5, 1 RCMM (default) - ir_inversion: signal inversion: 0 not inverted (default), 1 inverted - ir_device_mask: bitmask of infrared devices (default: accept all) Those parameters may be set anytime. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5320): Filled in limiting values in tda827x.cHartmut Hackmann1-2/+10
The parameters for minimum and maximum frequency were missing. Also added mail addresses of the module authors. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5319): Set tda827x to sleep mode after attachHartmut Hackmann2-1/+10
This change sets the tda827x to sleep mode right after attach in dvb mode. It is just to save power. For the same reason, the ADC of the tda10046 gets turned off in sleep mode. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5317): Create tda827x dvb tuner moduleMichael Krufky5-3/+546
The patch moves the tda827x dvb tuning code to a separate module Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5315): Tda1004x: check request firmware for NULL ponter againHartmut Hackmann1-11/+17
In older versions, this was used to decide whether to boot from eeprom or file. This is no longer necessary but the check helps to avoid an oops with misconfigured cards. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5311): Tda1004x driver updatesHartmut Hackmann2-52/+83
There are the following changes: - separate configuration of IF and GPIOs. - set GPIOs before firmware load. This helps to avoid I2C address collisions. - if desired invert GPIOs at sleep (automatic return to analog mode of card). - added 3 tuner configuration bytes to config stuct. - added i2c gate address to config struct. - moved _state struct declaration to header file to make it accessible on board layer. - added "conf_probed" to the state struct to allow i.e. probing for correct tuner version. - changed firmware load mechanism to always: + check if already loaded + try to boot from eeprom + try downlad from host - corrected name of tda10046 firmware image (backward compatible). Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5307): Add support for the cx23415 MPEG decoding features.Hans Verkuil2-17/+17
The cx23415 adds some extra features that this DVB decoding API did not support. This API has been expanded to support the required features. Both source and binary backwards compatibility is kept intact by these changes. So existing applications are not affected. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5297): Fix identation on tda10021.cMauro Carvalho Chehab1-1/+1
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 17:55:20 +0000