summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2009-08-24Merge branch 'for-linus' of ↵Linus Torvalds5-45/+85
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ucb1400_ts - enable interrupt unconditionally Input: ucb1400_ts - enable ADC Filter Input: wacom - don't use on-stack memory for report buffers Input: iforce - support new revision of ACT LABS Force RS Input: joydev - decouple axis and button map ioctls from input constants
2009-08-21Input: ucb1400_ts - enable interrupt unconditionallyPavel Revak1-4/+4
Sometimes, when using the touchscreen, it stops working till next restart and the following message is printed: ucb1400: unexpected IE_STATUS = 0x0 The following patch retriggers the touchscreen interrupt unconditionally. This prevents hanging of the touchscreen in case of bogus interrupt occurence. Signed-off-by: Pavel Revak <palo@bielyvlk.sk> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-21Input: ucb1400_ts - enable ADC FilterMarek Vasut1-0/+9
This patch enables ADC filtering on UCB1400 codec by default. The benefit from this change is mostly on some Colibri boards where the ADCSYNC pin of the UCB1400 codec isn't connected causing the touchscreen to jitter very badly. This change has no visible effect on boards where the ADCSYNC pin is connected. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Tested-by: Palo Revak <palo@bielyvlk.sk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-21Input: wacom - don't use on-stack memory for report buffersDmitry Torokhov1-14/+29
Tested-by: Martin Capitanio <martin@capitanio.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-19Input: iforce - support new revision of ACT LABS Force RSJiri Kosina2-0/+2
Reported-by: cemede@gmail.com Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-12Input: joydev - decouple axis and button map ioctls from input constantsStephen Kitt1-27/+41
The KEY_MAX change in 2.6.28 changed the values of the JSIOCSBTNMAP and JSIOCGBTNMAP constants; software compiled with the old values no longer works with kernels following 2.6.28, because the ioctl switch statement no longer matches the values given by the software. This patch handles these ioctls independently of the length of data specified, and applies the same treatment to JSIOCSAXMAP and JSIOCGAXMAP which currently depend on ABS_MAX. Signed-off-by: Stephen Kitt <steve@sk2.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-07Merge branch 'for-linus' of ↵Linus Torvalds3-9/+33
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: matrix_keypad - make matrix keymap size dynamic Input: wistron_btns - support Prestigio Wifi RF kill button Input: i8042 - add Asus G1S to noloop exception list
2009-08-05Input: matrix_keypad - make matrix keymap size dynamicEric Miao1-9/+9
Remove assumption on the shift and size of rows/columns form matrix_keypad driver. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05Input: wistron_btns - support Prestigio Wifi RF kill buttonTJ1-0/+16
The Prestigio 157, an old no-name clone laptop uses input keys very similar to the Wistron 1557/MS2141 with the addition of BIOS-controlled wireless radio frequency kill switch. This patch adds support for the RF kill switch control and adds manual identification of the model. The Prestigio does not expose any recognisable identity via dmidecode and so requires manual selection at module init using force=1 keymap=prestigio Signed-off-by: TJ <ubuntu@tjworld.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05Input: i8042 - add Asus G1S to noloop exception listJory A. Pratt1-0/+8
The synaptic touchpad on the Asus G1S is not properly detected when rebooting machine or on cold boot from time to time. Adding the Asus G1S to the noloop exception table resolves the issue. # dmidecode 2.10 SMBIOS 2.4 present. Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: ASUSTeK Computer Inc. Product Name: G1S Version: 1.0 Wake-up Type: Power Switch SKU Number: Family: Signed-off-by: Jory A. Pratt <geekypenguin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-02parisc: hp_sdc_mlc.c - check return value of down_trylock()Helge Deller1-1/+1
Signed-off-by: Helge Deller <deller@gmx.de>
2009-07-22Merge branch 'for-linus' of ↵Linus Torvalds6-18/+62
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atkbd - add force relese key quirk for Soltech TA12 Input: fix EVIOCGNAME/JSIOCGNAME regression Input: atkbd - add forced release keys quirk for FSC Amilo Pi 3525 Input: pcspkr - switch driver to dev_pm_ops Input: xpad - don't resend successfully sent outgoing requests Input: wistron_btns - recognize Maxdata Pro 7000 notebooks
2009-07-20Input: atkbd - add force relese key quirk for Soltech TA12Jerone Young1-0/+16
Netbooks based on the Soltech TA12 do not send a key release for volume keys causing Linux to think the key is constantly being pressed forever. Added quirk data for forced release keys. BugLink: https://bugs.launchpad.net//bugs/397499 Signed-off-by: Jerone Young <jerone.young@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-13Input: fix EVIOCGNAME/JSIOCGNAME regressionDaniel Mack2-3/+2
Commit 3d5cb60e ("Input: simplify name handling for certain input handles") introduced a regression for the EVIOCGNAME/JSIOCGNAME ioctl. Before this, patch, the platform device's name was given back to userspace which was good to identify devices. After this patch, the device is ("event%d", minor) which is not descriptive at all. This fixes the behaviour by taking dev->name. Reported-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Daniel Mack <daniel@caiaq.de> Reviewed-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-12Input: atkbd - add forced release keys quirk for FSC Amilo Pi 3525Simon Davie1-0/+16
This patch enables forced releasing of the Fn+Volume hotkeys on the Fujitsu Siemens Amilo Pi 3525 notebook. Signed-off-by: Simon Davie <nexx@nexxdesign.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-12Input: pcspkr - switch driver to dev_pm_opsFrans Pop1-2/+6
Gets rid of the following warning: Platform driver 'pcspkr' needs updating - please use dev_pm_ops Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-12Input: xpad - don't resend successfully sent outgoing requestsMichael Gruber1-13/+13
This avoids an infinite loop. Signed-off-by: Michael Gruber <lists.mg@googlemail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-12Input: wistron_btns - recognize Maxdata Pro 7000 notebooksGiuseppe Mazzotta1-0/+9
This patch adds DMI information to automatically load the correct layout for the Maxdata Pro 7000X/DX notebook models. Such notebooks are clones of Fujitsu Amilo V2000, the hook for the v2000 is being used and I have tested that perfectly works. The immediate result of integrating this patch is that the five special buttons will work on these specific notebook models and that the RF killswitch will not be activated after suspend. This patch definitively obsoletes the fsam7400 module which I was still needing to enable wifi and to fix the RF killswitch suspend problem; in the current 2.6.30 kernel it is necessary to load the wistron_btns module with options 'force=1 keymap=1557/MS2141', which was not anyway a complete workaround. Signed-off-by: Giuseppe Mazzotta <g.mazzotta@iragan.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-08Merge branch 'for-linus' of ↵Linus Torvalds9-181/+691
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio_mouse - use standard driver registration method Input: mark serio and i8042 as suspended when hibernating too Input: add support for generic GPIO-based matrix keypad Input: arrange keyboards alphabetically Input: gpio-keys - avoid possibility of sleeping in timer function Input: gpio-keys - revert 'change timer to workqueue' Input: dm355evm_keys - fix kconfig symbol names Input: wacom - add DTF720a support and fix rotation on Intuos3 Input: i8042 - more reset quirks for MSI Wind-clone netbooks
2009-07-07Input: gpio_mouse - use standard driver registration methodSaeed Bishara1-6/+5
This patch is needed when the gpio's became available only at late stages, for example, when using i2c gpio expander. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-07Input: mark serio and i8042 as suspended when hibernating tooThadeu Lima de Souza Cascardo2-6/+8
Serio ports are not being restarted any longer because resume operations after hibernate do nothing, since the device has not been marked as suspended. This happens because suspend is only considering the SUSPEND event but not the FREEZE event. Note that this driver has still to migrate to dev_pm_ops, but this fixes this particular bug now. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-03Update Yoichi Yuasa's e-mail addressYoichi Yuasa1-2/+2
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-29Input: add support for generic GPIO-based matrix keypadEric Miao3-2/+465
Original patch by Marek Vasut, modified by Eric in: 1. use delayed work to simplify the debouncing 2. combine col_polarity/row_polarity into a single active_low field 3. use a generic bit array based XOR algorithm to detect key press/release, which should make the column assertion time shorter and code a bit cleaner 4. remove the ALT_FN handling, which is no way generic, the ALT_FN key should be treated as no different from other keys, and translation will be done by user space by commands like 'loadkeys'. 5. explicitly disable row IRQs and flush potential pending work, and schedule an immediate scan after resuming as suggested by Uli Luckas 6. incorporate review comments from many others Patch tested on Littleton/PXA310 (though PXA310 has a dedicate keypad controller, I have to configure those pins as generic GPIO to use this driver, works quite well, though), and Sharp Zaurus model SL-C7x0 and SL-C1000. [dtor@mail.ru: fix error unwinding path, support changing keymap from userspace] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-by: Trilok Soni <soni.trilok@gmail.com> Reviewed-by: Uli Luckas <u.luckas@road.de> Reviewed-by: Russell King <linux@arm.linux.org.uk> Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-29Input: arrange keyboards alphabeticallyDmitry Torokhov2-162/+161
Hopefully it will reduce conflicts when merging patches. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-28Input: gpio-keys - avoid possibility of sleeping in timer functionJani Nikula1-5/+12
The gpio_get_value function may sleep, so it should not be called in a timer function. Move gpio_get_value calls to workqueue. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-28Input: gpio-keys - revert 'change timer to workqueue'Jani Nikula1-12/+20
This reverts commit 0b346838c5862bfe911432956a106d602535d030. This commit breaks GPIO debouncing by replacing the original mod_timer with schedule_delayed_work in the interrupt handler. The latter does not kick the timer further on GPIO line changes as it should to perform debouncing. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-28Input: wacom - add DTF720a support and fix rotation on Intuos3Ping Cheng1-1/+5
This patch adds DTF720a support and fixes an Intuos3 rotation pen out-proximity bug. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-28Input: i8042 - more reset quirks for MSI Wind-clone netbooksYan Li1-0/+28
When testing Moblin on various netbooks, we've got reports that many MSI Wind clones need the i8042 reset quirks for the keyboard and/or touchpad's proper function. Signed-off-by: Yan Li <yan.i.li@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-20Merge branch 'for-linus' of ↵Linus Torvalds40-217/+4122
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits) Input: add driver for Synaptics I2C touchpad Input: synaptics - add support for reporting x/y resolution Input: ALPS - handle touchpoints buttons correctly Input: gpio-keys - change timer to workqueue Input: ads7846 - pin change interrupt support Input: add support for touchscreen on W90P910 ARM platform Input: appletouch - improve finger detection Input: wacom - clear Intuos4 wheel data when finger leaves proximity Input: ucb1400 - move static function from header into core Input: add driver for EETI touchpanels Input: ads7846 - more detailed model name in sysfs Input: ads7846 - support swapping x and y axes Input: ati_remote2 - use non-atomic bitops Input: introduce lm8323 keypad driver Input: psmouse - ESD workaround fix for OLPC XO touchpad Input: tsc2007 - make sure platform provides get_pendown_state() Input: uinput - flush all pending ff effects before destroying device Input: simplify name handling for certain input handles Input: serio - do not use deprecated dev.power.power_state Input: wacom - add support for Intuos4 tablets ...
2009-06-19Input: add driver for Synaptics I2C touchpadMike Rapoport3-0/+695
This driver supports Synaptics I2C touchpad controller on eXeda mobile device. Unfortunaltely it only works in relative mode and thus is not comaptible with Xorg Synaptics driver. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-19Input: synaptics - add support for reporting x/y resolutionTero Saarni3-3/+39
Synaptics uses anisotropic coordinate system. On some wide touchpads vertical resolution can be twice as high as horizontal which causes unequal sensitivity on x/y directions. Add support for reading the resolution with EVIOCGABS ioctl. Signed-off-by: Tero Saarni <tero.saarni@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-16Merge branch 'akpm'Linus Torvalds2-1/+2
* akpm: (182 commits) fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset fbdev: *bfin*: fix __dev{init,exit} markings fbdev: *bfin*: drop unnecessary calls to memset fbdev: bfin-t350mcqb-fb: drop unused local variables fbdev: blackfin has __raw I/O accessors, so use them in fb.h fbdev: s1d13xxxfb: add accelerated bitblt functions tcx: use standard fields for framebuffer physical address and length fbdev: add support for handoff from firmware to hw framebuffers intelfb: fix a bug when changing video timing fbdev: use framebuffer_release() for freeing fb_info structures radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb? s3c-fb: CPUFREQ frequency scaling support s3c-fb: fix resource releasing on error during probing carminefb: fix possible access beyond end of carmine_modedb[] acornfb: remove fb_mmap function mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF mb862xxfb: restrict compliation of platform driver to PPC Samsung SoC Framebuffer driver: add Alpha Channel support atmel-lcdc: fix pixclock upper bound detection offb: use framebuffer_alloc() to allocate fb_info struct ... Manually fix up conflicts due to kmemcheck in mm/slab.c
2009-06-16time: move PIT_TICK_RATE to linux/timex.hArnd Bergmann2-1/+2
PIT_TICK_RATE is currently defined in four architectures, but in three different places. While linux/timex.h is not the perfect place for it, it is still a reasonable replacement for those drivers that traditionally use asm/timex.h to get CLOCK_TICK_RATE and expect it to be the PIT frequency. Note that for Alpha, the actual value changed from 1193182UL to 1193180UL. This is unlikely to make a difference, and probably can only improve accuracy. There was a discussion on the correct value of CLOCK_TICK_RATE a few years ago, after which every existing instance was getting changed to 1193182. According to the specification, it should be 1193181.818181... Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Len Brown <lenb@kernel.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-15xen: remove driver_data direct access of struct device from more driversGreg Kroah-Hartman1-4/+4
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.osdl.org Acked-by: Chris Wright <chrisw@sous-sol.org> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15input: remove driver_data direct access of struct deviceGreg Kroah-Hartman1-1/+1
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15Driver Core: input: add nodename for input driversKay Sievers1-0/+6
This adds support to the input core to report the proper device name to userspace for their devices. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits) trivial: remove the trivial patch monkey's name from SubmittingPatches trivial: Fix a typo in comment of addrconf_dad_start() trivial: usb: fix missing space typo in doc trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug trivial: Remove the hyphen from git commands trivial: fix ETIMEOUT -> ETIMEDOUT typos trivial: Kconfig: .ko is normally not included in module names trivial: SubmittingPatches: fix typo trivial: Documentation/dell_rbu.txt: fix typos trivial: Fix Pavel's address in MAINTAINERS trivial: ftrace:fix description of trace directory trivial: unnecessary (void*) cast removal in sound/oss/msnd.c trivial: input/misc: Fix typo in Kconfig trivial: fix grammo in bus_for_each_dev() kerneldoc trivial: rbtree.txt: fix rb_entry() parameters in sample code trivial: spelling fix in ppc code comments trivial: fix typo in bio_alloc kernel doc trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt trivial: Miscellaneous documentation typo fixes trivial: fix typo milisecond/millisecond for documentation and source comments. ...
2009-06-14Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-1/+1
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
2009-06-12Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds1-1/+1
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (55 commits) microblaze: Don't use access_ok for unaligned microblaze: remove unused flat_stack_align() definition microblaze: Fix problem with early_printk in startup microblaze_mmu_v2: Makefiles microblaze_mmu_v2: Kconfig update microblaze_mmu_v2: stat.h MMU update microblaze_mmu_v2: Elf update microblaze_mmu_v2: Update dma.h for MMU microblaze_mmu_v2: Update cacheflush.h microblaze_mmu_v2: Update signal returning address microblaze_mmu_v2: Traps MMU update microblaze_mmu_v2: Enable fork syscall for MMU and add fork as vfork for noMMU microblaze_mmu_v2: Update linker script for MMU microblaze_mmu_v2: Add MMU related exceptions handling microblaze_mmu_v2: uaccess MMU update microblaze_mmu_v2: Update exception handling - MMU exception microblaze_mmu_v2: entry.S, entry.h microblaze_mmu_v2: Add CURRENT_TASK for entry.S microblaze_mmu_v2: MMU asm offset update microblaze_mmu_v2: Update tlb.h and tlbflush.h ...
2009-06-12trivial: input/misc: Fix typo in KconfigAlessio Igor Bogani1-1/+1
Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-11[ARM] 5544/1: Trust PrimeCell resource sizesLinus Walleij1-1/+1
I found the PrimeCell/AMBA Bus drivers distrusting the resource passed in as part of the struct amba_device abstraction. This patch removes all hard coded resource sizes found in the PrimeCell drivers and move the responsibility of this definition back to the platform/board device definition, which already exist and appear to be correct for all in-tree users of these drivers. We do this using the resource_size() inline function which was also replicated in the only driver using the resource size, so that has been changed too. The KMI_SIZE was left in kmi.h in case someone likes it. Test-compiled against Versatile and Integrator defconfigs, seems to work but I don't posess these boards and cannot test them. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-11Input: ALPS - handle touchpoints buttons correctlyUlrich Dangel1-4/+9
When pressing any button belonging to the touchpoint, the generated click events don't belong to the touchpoint but to the touchpad. This patch fixes this behaviour, the events will be sent via the correct device, so scrolling with touchpoint is possible. Signed-off-by: Ulrich Dangel <uli@spamt.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-11Input: gpio-keys - change timer to workqueueAlek Du1-20/+12
The gpio_get_value function of I2C/SPI GPIO expander may sleep thus this function call can not be called in a timer function. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-11Input: ads7846 - pin change interrupt supportMichael Roth1-3/+9
Some SoCs support only pin change interrupts on GPIO pins used as irq lines. The ads7846 core is not affected from the additional irqs on the rising edge because the code accounts touch bounce anyway by kicking in a timer and disabling the irq after the first request and reenabling the irq after a timeout when there is no longer pen down detected. Signed-off-by: Michael Roth <mroth@nessie.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-11Input: add support for touchscreen on W90P910 ARM platformWan ZongShun3-0/+359
The touchscreen works in two modes, wait trigger mode and auto-semi mode. The device starts in wait trigger mode and waits until pressure is detected, then device sets WT_INT bit and raises an interrupt. The driver should put the device into auto-semi mode and prepare for reading first X and then Y coordinates. When coordinate data is ready the driver sets ADC_INT bit and raises interrupt again. [dtor@mail.ru: various cleanups] Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-11Merge commit 'v2.6.30' into nextDmitry Torokhov8-7/+31
2009-06-03Input: appletouch - improve finger detectionJeremy Huddleston1-1/+1
The appletouch driver is prone to reporting multiple fingers when only one is pressing. The appletouch driver queries an array of pressure sensors and counts local maxima in pressure to determine the number of fingers. It just does this on the raw values, so a data stream like: 0 100 250 300 299 300 250 100 0 actually registers as 2 fingers. This patch updates the logic to ignore small dips in pressure that are less than the threshold. Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-03Input: wacom - clear Intuos4 wheel data when finger leaves proximityPing Cheng1-0/+3
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-29Merge branch 'for-linus' of ↵Linus Torvalds3-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: libps2 - better handle bad scheduler decisions Input: usb1400_ts - fix access to "device data" in resume function Input: multitouch - augment event semantics documentation Input: multitouch - add tracking ID to the protocol
2009-05-28Input: libps2 - better handle bad scheduler decisionsDmitry Torokhov1-1/+1
Sometimes devices send us their responses in time but due to unfortunate scheduling decisions the receiving thread does not get scheduled till much later and we erroneously decide that device timed out. Work around this problem by checking whether we received the data we needed instead of checking timeout condition. Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 10:56:53 +0000