summaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)AuthorFilesLines
2013-01-14[libata] replace sata_settings with devslp_timingShane Huang2-12/+16
NCQ capability was used to check availability of SATA Settings page from Identify Device Data Log, which contains DevSlp timing variables. It does not work on some HDDs and leads to error messages. IDENTIFY word 78 bit 5(Hardware Feature Control) can't work either because it is only the sufficient condition of Identify Device data log, not the necessary condition. This patch replaced ata_device->sata_settings with ->devslp_timing to only save DevSlp timing variables(8 bytes), instead of the whole SATA Settings page(512 bytes). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=51881 Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Shane Huang <shane.huang@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-14[libata] ahci: Add support for Enmotus Bobcat device.Hugh Daschbach1-1/+7
Silicon does not support standard AHCI BAR assignment. Add vendor/device exception to force BAR 2. Signed-off-by: Hugh Daschbach <hugh.daschbach@enmotus.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-14[libata] ahci: Fix lack of command retry after a success error handler.Bian Yu1-1/+1
It should be a mistake introduced by commit 8d899e70c1b3afff. qc->flags can't be set AC_ERR_* Signed-off-by: Bian Yu <bianyu@kedacom.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-03Drivers: ata: remove __dev* attributes.Greg Kroah-Hartman25-94/+85
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-15Merge tag 'upstream-linus' of ↵Linus Torvalds24-354/+350
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata updates from Jeff Garzik: - More ACPI fixes - ata_piix: cosmetic code movement, re-enable MS Virtual PC support - generic platform driver improvements; use common code - pata_cs5536: add quirk for broken udma - printk prettiness (dev_printk becomes dev_info, etc.) - sata_promise: fix hardreset lockdep error - minor cleanups from Sergei Shtylyov - minor, automated cleanups from Wei Yongjun - fix null ptr deref bug, in sysfs API * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (37 commits) sata_dwc_460ex: remove file exec bit (chmod 0755 -> 0644) [libata] fix Null pointer dereference on disk error ahci: convert ata_link_printk() to ata_link_warn() pata_imx: convert ata_dev_printk() to ata_dev_info() ARM: ep93xx: convert ata_<foo>_printk() to ata_<foo>_<level>() ahci_platform: make structs static Revert "pata_octeon_cf: perform host detach, removal on exit" Revert "libata: check SATA_SETTINGS log with HW Feature Ctrl" pata_of_platform: fix compile error libata: use pci_get_drvdata() helper pata_octeon_cf: perform host detach, removal on exit sata_highbank: utilize common ata_platform_remove_one() pata_palmld: utilize common ata_platform_remove_one() pata_platform: remove unused remove function pata_platform: utilize common ata_platform_remove_one() pata_of_platform: utilize common ata_platform_remove_one() pata_mpc52xx: utilize common ata_platform_remove_one() pata_ixp4xx_cf: utilize common ata_platform_remove_one() ahci_platform: utilize common ata_platform_remove_one() libata: implement ata_platform_remove_one() ...
2012-12-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-135/+288
Pull MIPS updates from Ralf Baechle: "The MIPS bits for 3.8. This also includes a bunch fixes that were sitting in the linux-mips.org git tree for a long time. This pull request contains updates to several OCTEON drivers and the board support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B, updates to the SSB bus support, MIPS kexec code and adds support for kdump. When pulling this, there are two expected merge conflicts in include/linux/bcma/bcma_driver_chipcommon.h which are trivial to resolve, just remove the conflict markers and keep both alternatives." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits) MIPS: PMC-Sierra Yosemite: Remove support. VIDEO: Newport Fix console crashes MIPS: wrppmc: Fix build of PCI code. MIPS: IP22/IP28: Fix build of EISA code. MIPS: RB532: Fix build of prom code. MIPS: PowerTV: Fix build. MIPS: IP27: Correct fucked grammar in ops-bridge.c MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled MIPS: Fix potencial corruption MIPS: Fix for warning from FPU emulation code MIPS: Handle COP3 Unusable exception as COP1X for FP emulation MIPS: Fix poweroff failure when HOTPLUG_CPU configured. MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y MIPS: Remove unused smvp.h MIPS/EDAC: Improve OCTEON EDAC support. MIPS: OCTEON: Add definitions for OCTEON memory contoller registers. MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian. MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree. MIPS: Remove usage of CEVT_R4K_LIB config option. ...
2012-12-14sata_dwc_460ex: remove file exec bit (chmod 0755 -> 0644)Jeff Garzik1-0/+1
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14[libata] fix Null pointer dereference on disk errorXiaotian Feng1-2/+4
Following oops were observed when disk error happened: [ 4272.896937] sd 0:0:0:0: [sda] Unhandled error code [ 4272.896939] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 4272.896942] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 5a de a7 00 00 08 00 [ 4272.896951] end_request: I/O error, dev sda, sector 5955239 [ 4291.574947] BUG: unable to handle kernel NULL pointer dereference at (null) [ 4291.658305] IP: [] ahci_activity_show+0x1/0x40 [ 4291.730090] PGD 76dbbc067 PUD 6c4fba067 PMD 0 [ 4291.783408] Oops: 0000 [#1] SMP [ 4291.822100] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/sw_activity [ 4291.934235] CPU 9 [ 4291.958301] Pid: 27942, comm: hwinfo ...... ata_scsi_find_dev could return NULL, so ata_scsi_activity_{show,store} should check if atadev is NULL. Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14ahci: convert ata_link_printk() to ata_link_warn()Wei Yongjun1-1/+1
Using ata_link_warn() instead of ata_link_printk(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14pata_imx: convert ata_dev_printk() to ata_dev_info()Wei Yongjun1-1/+1
Using ata_dev_info() instead of ata_dev_printk(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14ARM: ep93xx: convert ata_<foo>_printk() to ata_<foo>_<level>()Wei Yongjun1-4/+2
Using ata_<foo>_<level>() instead of ata_<foo>_printk(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14ahci_platform: make structs staticBrian Norris1-3/+3
These structs are used only for ahci_platform.c, so they should be static. Thanks to Fengguang for the (automated) suggestion. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14Revert "pata_octeon_cf: perform host detach, removal on exit"Jeff Garzik1-1/+0
This reverts commit 1645bf1b51e5788a18cb6af7cfbb221ee17a6e8b. Brian Norris writes: > David Daney writes: > I can seem to find it. Without knowing what that does, I would be inclined > to NACK the whole thing. A NACK is probably the right thing. I was mostly converting a few other drivers which used some simple, common patterns to use my new common code, but this driver was missing it altogether. It looks like there may be bigger issues, though, as you point out. > This patch is likely to be incomplete as the driver is also missing the > module_exit() things. > > It might be simpler to just make the driver "bool" instead of "tristate" in > the Kconfig. As noted earlier, I don't have much interest in this driver. I agree that there are some other issues with the driver; I think it leaks memory if it is ever allowed to unload, for one. Feel free to submit an alternative patch to prevent this driver from being built as a module. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14Revert "libata: check SATA_SETTINGS log with HW Feature Ctrl"Jeff Garzik1-1/+2
This reverts commit de90cd71f68e947d3bd6c3f2ef5731ead010a768. Shane Huang writes: Please suspend this patch because I just received two new DevSlp drives but found word 78 bit 5 is _not_ set. I'm checking with the drive vendor whether he gave me the wrong information. If bit 5 is not the necessary and sufficient condition, I will implement another patch to replace ata_device->sata_settings into ->devslp_timing. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-13ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian.David Daney1-0/+4
We need to set the 'endian' bit in this case. Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David Daney <david.daney@cavium.com>
2012-12-13MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.David Daney1-135/+284
The patch needs to eliminate the definition of OCTEON_IRQ_BOOTDMA so that the device tree code can map the interrupt, so in order to not temporarily break things, we do a single patch to both the interrupt registration code and the pata_octeon_cf driver. Also rolled in is a conversion to use hrtimers and corrections to the timing calculations. Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David Daney <david.daney@cavium.com>
2012-12-12Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM SoC Header cleanups from Olof Johansson: "This is a collection of header file cleanups, mostly for OMAP and AT91, that keeps moving the platforms in the direction of multiplatform by removing the need for mach-dependent header files used in drivers and other places." Fix up mostly trivial conflicts as per Olof. * tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits) ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h atmel: move ATMEL_MAX_UART to platform_data/atmel.h ARM: OMAP: Remove omap_init_consistent_dma_size() arm: at91: move at91rm9200 rtc header in drivers/rtc arm: at91: move reset controller header to arm/arm/mach-at91 arm: at91: move pit define to the driver arm: at91: move at91_shdwc.h to arch/arm/mach-at91 arm: at91: move board header to arch/arm/mach-at91 arn: at91: move at91_tc.h to arch/arm/mach-at91 arm: at91 move at91_aic.h to arch/arm/mach-at91 arm: at91 move board.h to arch/arm/mach-at91 arm: at91: move platfarm_data to include/linux/platform_data/atmel.h arm: at91: drop machine defconfig ARM: OMAP: Remove NEED_MACH_GPIO_H ARM: OMAP: Remove unnecessary mach and plat includes ...
2012-12-03pata_of_platform: fix compile errorBrian Norris1-0/+1
I failed to include <linux/libata.h>, causing this error: drivers/ata/pata_of_platform.c:93: error: 'ata_platform_remove_one' undeclared here (not in a function) Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03libata: use pci_get_drvdata() helperBrian Norris1-4/+3
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03pata_octeon_cf: perform host detach, removal on exitBrian Norris1-0/+1
This driver does not detach and remove its ata_host properly on device removal. Add the common .remove helper. Note: I do not know this driver well enough to ensure this is the right thing to do. Merge this patch with caution. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03sata_highbank: utilize common ata_platform_remove_one()Brian Norris1-11/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03pata_palmld: utilize common ata_platform_remove_one()Brian Norris1-3/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03pata_platform: remove unused remove functionBrian Norris1-17/+0
All users of __pata_platform_remove() have been converted to utilize the common ata_platform_remove_one(). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03pata_platform: utilize common ata_platform_remove_one()Brian Norris1-6/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03pata_of_platform: utilize common ata_platform_remove_one()Brian Norris1-6/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03pata_mpc52xx: utilize common ata_platform_remove_one()Brian Norris1-14/+3
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03pata_ixp4xx_cf: utilize common ata_platform_remove_one()Brian Norris1-10/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03ahci_platform: utilize common ata_platform_remove_one()Brian Norris1-11/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03libata: implement ata_platform_remove_one()Brian Norris1-0/+23
This relatively simple boiler-plate code is repeated in several platform drivers. We should implement a common version in libata. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03ahci_platform: perform platform exit in host_stop() hookBrian Norris1-7/+23
AHCI platform devices may provide an exit() routine, via ahci_platform_data, that powers off the SATA core. Such a routine should be executed from the ata_port_operations host_stop() hook. That way, the ATA subsystem can perform any last-minute hardware cleanup (via devres, for example), then trigger the power-off at the appropriate time. This patch fixes bus errors triggered during module removal or device unbinding, seen on an SoC SATA core. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03ahci_platform: convert to module_platform_driverBrian Norris1-12/+1
The ahci_platform driver can now use the module_platform_driver() macro. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03ahci_platform: enable hotplug unbindingBrian Norris1-2/+3
platform_driver_probe() should be used for registering this driver only if we want to "...remove its run-once probe() infrastructure from memory after the driver has bound to the device." However, we may want to leave the probe infrastructure in place in order to support binding/unbinding a device dynamically. This is useful, for instance, as a power management mechanism, where a device can be totally powered down when unbound (whereas with runtime power management, powering down the SATA core would incur unacceptable loss of functionality). Thus, convert this driver to use platform_driver_register(). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03libata: set dma_mode to 0xff in resetAaron Lu2-0/+2
ata_device->dma_mode's initial value is zero, which is not a valid dma mode, but ata_dma_enabled will return true for this value. This patch sets dma_mode to 0xff in reset function, so that ata_dma_enabled will not return true for this case, or it will cause problem for pata_acpi. The corrsponding bugzilla page is at: https://bugzilla.kernel.org/show_bug.cgi?id=49151 Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Tested-by: Szymon Janc <szymon@janc.net.pl> Tested-by: Dutra Julio <dutra.julio@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Cc: <stable@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03ata_piix: re-order code and remove prototypesBartlomiej Zolnierkiewicz1-221/+198
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03libata: check SATA_SETTINGS log with HW Feature CtrlShane Huang1-2/+1
NCQ capability was used to check availability of SATA Settings page from Identify Device Data Log, which contains DevSlp timing variables. It does not work on some HDDs and leads to error messages. IDENTIFY word 78 bit 5(Hardware Feature Control) should be used. Quoting SATA spec 3.1: If Hardware Feature Control is supported, then: a) IDENTIFY DEVICE data word 78 bit 5 (see 13.2.1.18) shall be set to one; b) the SET FEATURES Select Hardware Feature Control subcommand shall be supported (see 13.3.8); c) page 08h of the Identify Device Data log (see 13.7.7) shall be supported; This patch is not tested on SATA HDD with DevSlp supported. Reported-by: Borislav Petkov <bp@amd64.org> Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-03libata: restore acpi disable functionalityAaron Lu1-0/+4
Commit 66fa7f215 "libata-acpi: improve ACPI disabling" introdcued the behaviour of disabling ATA ACPI if ata_acpi_on_devcfg failed the 2nd time, but commit 30dcf76ac dropped this behaviour and this caused problem for Dimitris Damigos, where his laptop can not resume correctly. The bugzilla page for it is: https://bugzilla.kernel.org/show_bug.cgi?id=49331 The problem is, ata_dev_push_id will fail the 2nd time it is invoked, and due to disabling ACPI code is dropped, ata_acpi_on_devcfg which calls ata_dev_push_id will keep failing and eventually made the device disabled. This patch restores the original behaviour, if acpi failed the 2nd time, disable acpi functionality for the device(and we do not event need to add a debug message for this as it is still there ;-). Reported-by: Dimitris Damigos <damigos@freemail.gr> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-11-28ata: Convert dev_printk(KERN_<LEVEL> to dev_<level>(Joe Perches1-3/+3
dev_<level> calls take less code than dev_printk(KERN_<LEVEL> and reducing object size is good. Coalesce formats for easier grep. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-11-28pata_arasan_cf: declare/use more local variables in arasan_cf_dma_start()Sergei Shtylyov1-2/+5
'acdev->qc', 'acdev->qc->ap', and 'acdev->qc->tf' expressions are used multiple times in this function, so it makes sense to use the local variables for them. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-11-28sata_highbank: use ATA_BUSYSergei Shtylyov1-1/+1
ahci_highbank_hardreset() uses bare number for the BSY bit of the ATA status register, despite it is #define'd in <linux/ata.h> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-11-28sata_sx4: pdc20621_{ata|host}_sg() do not need 'tf' parameterSergei Shtylyov1-8/+6
... because those functions don't use this parameter. While at it, correctly align 'total_len' parameter. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-11-28sata_sil24: remove unused variable from sata_sil24.cWei Yongjun1-4/+0
The variable addr is initialized but never used otherwise, so remove the unused variable. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-11-28sata_inic162x: remove unused variable in inic_scr_read()Wei Yongjun1-2/+0
The variable addr is initialized but never used otherwise, so remove the unused variable. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-11-28pata_rdc: remove unused variable in rdc_init_one()Wei Yongjun1-3/+0
The variable port_flags is initialized but never used otherwise, so remove the unused variable. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-11-28pata_cs5536: add quirk for broken udmaChristian Gmeiner1-1/+31
I am working on a device which uses the cs5536 pata driver. There are some broken hardware revisions out in the field, which can be detected via DMI. On older versions with an embedded BIOS I used libata.dma=0 to disable dma completely. Now we are switching to a coreboot/seabios based BIOS where we have DMI support and so I think its a good idea to get rid of all those hacky kernel parameters as the same image is used other devices where libata.dma=0 is not a good idea. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-11-28ata_piix: reenable MS Virtual PC guestsOlaf Hering1-3/+22
An earlier commit cd006086fa5d91414d8ff9ff2b78fbb593878e3c ("ata_piix: defer disks to the Hyper-V drivers by default") broke MS Virtual PC guests. Hyper-V guests and Virtual PC guests have nearly identical DMI info. As a result the driver does currently ignore the emulated hardware in Virtual PC guests and defers the handling to hv_blkvsc. Since Virtual PC does not offer paravirtualized drivers no disks will be found in the guest. One difference in the DMI info is the product version. This patch adds a match for MS Virtual PC 2007 and "unignores" the emulated hardware. This was reported for openSuSE 12.1 in bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=737532 Here is a detailed list of DMI info from example guests: hwinfo --bios: virtual pc guest: System Info: #1 Manufacturer: "Microsoft Corporation" Product: "Virtual Machine" Version: "VS2005R2" Serial: "3178-9905-1533-4840-9282-0569-59" UUID: undefined, but settable Wake-up: 0x06 (Power Switch) Board Info: #2 Manufacturer: "Microsoft Corporation" Product: "Virtual Machine" Version: "5.0" Serial: "3178-9905-1533-4840-9282-0569-59" Chassis Info: #3 Manufacturer: "Microsoft Corporation" Version: "5.0" Serial: "3178-9905-1533-4840-9282-0569-59" Asset Tag: "7188-3705-6309-9738-9645-0364-00" Type: 0x03 (Desktop) Bootup State: 0x03 (Safe) Power Supply State: 0x03 (Safe) Thermal State: 0x01 (Other) Security Status: 0x01 (Other) win2k8 guest: System Info: #1 Manufacturer: "Microsoft Corporation" Product: "Virtual Machine" Version: "7.0" Serial: "9106-3420-9819-5495-1514-2075-48" UUID: undefined, but settable Wake-up: 0x06 (Power Switch) Board Info: #2 Manufacturer: "Microsoft Corporation" Product: "Virtual Machine" Version: "7.0" Serial: "9106-3420-9819-5495-1514-2075-48" Chassis Info: #3 Manufacturer: "Microsoft Corporation" Version: "7.0" Serial: "9106-3420-9819-5495-1514-2075-48" Asset Tag: "7076-9522-6699-1042-9501-1785-77" Type: 0x03 (Desktop) Bootup State: 0x03 (Safe) Power Supply State: 0x03 (Safe) Thermal State: 0x01 (Other) Security Status: 0x01 (Other) win2k12 guest: System Info: #1 Manufacturer: "Microsoft Corporation" Product: "Virtual Machine" Version: "7.0" Serial: "8179-1954-0187-0085-3868-2270-14" UUID: undefined, but settable Wake-up: 0x06 (Power Switch) Board Info: #2 Manufacturer: "Microsoft Corporation" Product: "Virtual Machine" Version: "7.0" Serial: "8179-1954-0187-0085-3868-2270-14" Chassis Info: #3 Manufacturer: "Microsoft Corporation" Version: "7.0" Serial: "8179-1954-0187-0085-3868-2270-14" Asset Tag: "8374-0485-4557-6331-0620-5845-25" Type: 0x03 (Desktop) Bootup State: 0x03 (Safe) Power Supply State: 0x03 (Safe) Thermal State: 0x01 (Other) Security Status: 0x01 (Other) Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-11-28sata_promise: fix hardreset lockdep errorMikael Pettersson1-2/+13
sata_promise's pdc_hard_reset_port() needs to serialize because it flips a port-specific bit in controller register that's shared by all ports. The code takes the ata host lock for this, but that's broken because an interrupt may arrive on our irq during the hard reset sequence, and that too will take the ata host lock. With lockdep enabled a big nasty warning is seen. Fixed by adding private state to the ata host structure, containing a second lock used only for serializing the hard reset sequences. This eliminated the lockdep warnings both on my test rig and on the original reporter's machine. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Adko Branil <adkobranil@yahoo.com> Cc: stable@vger.kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-11-22Merge tag 'scsi-fixes' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of four bug fixes. The isci one is an obvious thinko (using request buffer instead of response buffer) which causes a command to fail. The three others are DIF/DIX updates which are required because they're part of a series of ten patches, the other seven of which went into the block layer during the merge window meaning our current DIF/DIX implementation is broken without these three. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] sd: Implement support for WRITE SAME [SCSI] sd: Permit merged discard requests [SCSI] Add a report opcode helper [SCSI] isci: copy fis 0x34 response into proper buffer
2012-11-16[libata] PM callbacks should be conditionally compiled on CONFIG_PM_SLEEPYuanhan Liu3-3/+3
This will fix warnings like following when CONFIG_PM_SLEEP is not set: warning: 'xxx_suspend' defined but not used [-Wunused-function] warning: 'xxx_resume' defined but not used [-Wunused-function] Because SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) Only references the callbacks on CONFIG_PM_SLEEP (instead of CONFIG_PM). Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: linux-ide@vger.kernel.org Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-11-15sata_svw: check DMA start bit before resetDavid Milburn1-0/+35
If kdump is triggered with pending IO, controller may not respond causing kdump to fail. http://marc.info/?l=linux-ide&m=133032255424658&w=2 During error recovery ata_do_dev_read_id never completes due hang in mmio_insw. ata_do_dev_read_id ata_sff_data_xfer ioread16_rep mmio_insw if DMA start bit is cleared before reset, PIO command is successful and kdump succeeds. Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-11-15libata debugging: Warn when unable to find timing descriptor based on xfer_modeBorislav Petkov1-0/+4
ata_timing_find_mode could return NULL which is not checked by all low-level ATA drivers using it and cause a NULL ptr deref. Warn at least so that possible issues can get fixed easily. Signed-off-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 20:21:10 +0000