summaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)AuthorFilesLines
2012-08-25libata: Add a space to " 2GB ATA Flash Disk" DMA blacklist entryPrarit Bhargava1-1/+1
commit d70e551c8e1ecb6f20422f8db6bfe6a0049edcb8, Add " 2GB ATA Flash Disk"/"ADMA428M" to DMA blacklist, should have added a space before 2GB. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17[libata] new quirk, lift bridge limits for Buffalo DriveStation QuattroJeff Garzik1-0/+1
Michael Eitelwein writes: I have an external SATA drive that was slowed down by bridge limits. I found a solution in a thread on this list posted in 2008: It introduces whitelist entries in libata-core.c for devices with well working bridges (e.g. email on Fri, 31 Oct 2008 01:45:27 -0400). I added my device to this whitelist in a custom built kernel and it works fine for weeks now. How can I have this device added on the whitelist within the official kernel? Is this whitelist mechanism still supported or is there a smarter way to achieve whitelisting? I added the following whitelist entry for my Buffalo DriveStation Quattro "BUFFALO HD-QSU2/R5": /* Devices that do not need bridging limits applied */ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, { "BUFFALO HD-QSU2/R5", NULL, ATA_HORKAGE_BRIDGE_OK, }, Reported-by: Michael Eitelwein <michael@eitelwein.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17[libata] Kconfig: Elaborate that SFF is meant for legacy and PATA stuffPaul Menzel1-1/+1
Building Linux for an ASUS Eee PC 701 4G with ata2.00: CFA: SILICONMOTION SM223AC, , max UDMA/66 ata2.00: 7815024 sectors, multi 0: LBA ata2.00: configured for UDMA/66 scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 7815024 512-byte logical blocks: (4.00 GB/3.72 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 1:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg0 type 0 I followed the advice to not use the deprecated old PATA subsystem ATA/ATAPI/MFM/RLL support (DEPRECATED) ---> and use the ATA subsystem instead. Serial ATA and Parallel ATA drivers ---> Unfortunately I needed several tries to find out, that I needed the SFF menu I had not selected before because I had never heard that term before. I think it would have helped me, to have PATA or legacy IDE in that item’s name. Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17[libata] acpi: call ata_acpi_gtm during ata port init timeAaron Lu1-11/+4
Commit 30dcf76acc695cbd2fa919e294670fe9552e16e7 mistakenly dropped the code to get an initial gtm for the IDE channel. This caused the following problem for Sergei: http://marc.info/?l=linux-kernel&m=134484963618457&w=2 Fix this by adding the call back in ata_acpi_bind_host, and due to this, the ata_ap_acpi_handle is modified accordingly. Tested-by: Sergei Trofimovich <slyich@gmail.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17ata_piix: Add Device IDs for Intel Lynx Point-LP PCHJames Ralston1-0/+8
This patch adds the IDE-mode SATA Device IDs for the Intel Lynx Point-LP PCH Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17ahci: Add Device IDs for Intel Lynx Point-LP PCHJames Ralston1-0/+8
This patch adds the AHCI-mode SATA Device IDs for the Intel Lynx Point-LP PCH Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17pata_atiixp: override cable detection on MSI E350DM-E33Arnd Hannemann1-0/+16
The mainboard MSI E350DM-E33 is advertised with 6 SATA ports. As it turns out, two of them seem to be driven by on-board SATA<->PATA converters. If a disk drive is connected to one of them kernel uses UDMA/33 mode due to cable detection: [ 34.550823] scsi4 : pata_atiixp [ 34.555517] scsi5 : pata_atiixp [ 34.555942] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14 [ 34.555948] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15 ... [ 35.040799] ata5.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133 [ 35.040806] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 35.040817] ata5.00: limited to UDMA/33 due to 40-wire cable [ 35.049166] ata5.00: configured for UDMA/33 [ 35.049402] scsi 4:0:0:0: Direct-Access ATA WDC WD20EADS-00R 01.0 PQ: 0 ANSI: 5 This patch forces "short cable" mode on this board, as it seems clear that the on-board SATA<->PATA "cable" is short. With this patch the disk is configured for UDMA/100: [ 5.976756] ata5.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133 [ 5.996434] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 6.024787] ata5.00: configured for UDMA/100 Testing revealed no transfer issues. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17ahci: un-staticize ahci_dev_classifyRob Herring2-1/+3
Make ahci_dev_classify available to the ahci platform driver for custom hard reset function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-02Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-13/+29
Pull arm-soc Marvell Orion device-tree updates from Olof Johansson: "This contains a set of device-tree conversions for Marvell Orion platforms that were staged early but took a few tries to get the branch into a format where it was suitable for us to pick up. Given that most people working on these platforms are hobbyists with limited time, we were a bit more flexible with merging it even though it came in late." * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ... Conflicts: drivers/watchdog/orion_wdt.c
2012-07-30ata/pata_arasan: remove conditional compilation of clk codeViresh Kumar1-13/+1
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h, there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif macros. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Jeff Garzik <jgarzik@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-27ATA: sata_mv: Add device tree supportAndrew Lunn1-13/+29
Add support for instantiating this driver from device tree, and add the necassary DT information to the kirkwood.dtsi file. This is based on previous work by Michael Walle and Jason Cooper. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Josh Coombs <josh.coombs@gmail.com>
2012-07-25[libata] pata_cmd64x: whitespace cleanupJeff Garzik1-2/+2
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25libata-acpi: fix up for acpi_pm_device_sleep_state APIStephen Rothwell1-1/+1
After merging the libata tree, today's [2012-07-01] linux-next build (x86_64 allmodconfig) failed like this: drivers/ata/libata-acpi.c: In function 'ata_acpi_set_state': drivers/ata/libata-acpi.c:872:5: error: too few arguments to function 'acpi_pm_device_sleep_state' include/acpi/acpi_bus.h:418:5: note: declared here Caused by commit 3bd46600a7a7 ("libata-acpi: add ata port runtime D3Cold support") from the libata tree interacting with commit ee85f543710d ("ACPI/PM: specify lowest allowed state for device sleep state") from the pci tree. This patch adds ACPI_STATE_D3 as the new third parameter to acpi_pm_device_sleep_state() Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25Merge branch 'master' [vanilla Linus master] into libata-dev.git/upstreamJeff Garzik2-11/+50
Two bits were appended to the end of the bitfield list in struct scsi_device. Resolve that conflict by including both bits. Conflicts: include/scsi/scsi_device.h
2012-07-25sata_dwc_460ex: device tree may specify dma_channelThang Q. Nguyen1-17/+31
Only channel 0 is currently support and the driver code is fixed on channel 0. This patch lets device node specifying dma-channel in case it is not 0. If no dma-channel property is specified, channel 0 is used as default. Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25ahci, trivial: fixed coding style issues related to bracesJeffrin Jose1-22/+11
Fixed coding style issues related to braces found by checkpatch.pl in drivers/ata/ahci.c Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25ahci_platform: add hibernation callbacksShiraz Hashim1-7/+3
Use existing suspend, resume implementation for hibernation callbacks. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25libata-eh.c: local functions should not be exposed globallyH Hartley Sweeten1-1/+1
The function ata_ering_clear_cb is only referenced in this file and should be marked static to prevent it from being exposed globally. This quiets the sparse warning: warning: symbol 'ata_ering_clear_cb' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25libata-transport.c: local functions should not be exposed globallyH Hartley Sweeten1-3/+3
Functions not referenced outside of a source file should be marked static to prevent it from being exposed globally. This quiets the sparse warnings: warning: symbol 'ata_is_port' was not declared. Should it be static? warning: symbol 'ata_is_link' was not declared. Should it be static? warning: symbol 'ata_is_ata_dev' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25sata_dwc_460ex: support hardresetThang Q. Nguyen1-1/+23
The hardreset operation is currently not supported. This causes sometime the SATA driver does cause kernel crash because of none-determined state.a This patch will fix the issue. Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25ata: use module_pci_driverAxel Lin60-761/+60
This patch converts the drivers in drivers/ata/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Mikael Pettersson <mikpe@it.uu.se> Cc: Mark Lord <kernel@teksavvy.com> Cc: Jeremy Higdon <jeremy@sgi.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25drivers/ata/pata_pcmcia.c: adjust suspicious bit operationJulia Lawall1-1/+2
IO_DATA_PATH_WIDTH_8 is 0, so a bit-and with it is always false. The value IO_DATA_PATH_WIDTH covers the bits of the IO_DATA_PATH constants, so first pick those bits and then make the test using !=. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25pata_imx: Convert to clk_prepare_enable/clk_disable_unprepareFabio Estevam1-5/+5
With the new i.mx clock framework, we need to use clk_prepare_enable/clk_disable_unprepare. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25ahci: Enable SB600 64bit DMA on MSI K9AGM2 (MS-7327) v2Mark Nelson1-0/+16
Like e65cc194f7628ecaa02462f22f42fb09b50dcd49 (ahci: Enable SB600 64bit DMA on MSI K9A2 Platinum) and 3c4aa91f21f65b7b40bdfb015eacbcb8453ccae2 (ahci: Enable SB600 64bit DMA on Asus M3A), this patch enables 64bit DMA for the AHCI SATA controller of another board that has the SB600 southbridge. In this case though we're enabling 64bit DMA for another MSI motherboard, the K9AGM2 or MS-7327. It is new enough that all of the BIOS releases since the initial release (1.0 from 2007-02-09) work correctly with 64bit DMA enabled. Signed-off-by: Mark Nelson <mdnelson8@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25[libata] Prevent interface errors with Seagate FreeAgent GoFlexDaniel J Blueman1-0/+1
When using my Seagate FreeAgent GoFlex eSATAp external disk enclosure, interface errors are always seen until 1.5Gbps is negotiated [1]. This occurs using any disk in the enclosure, and when the disk is connected directly with a generic passive eSATAp cable, we see stable 3Gbps operation as expected. Blacklist 3Gbps mode to avoid dataloss and the ~30s delay bus reset and renegotiation incurs. Signed-off-by: Daniel J Blueman <daniel@quora.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25libata-acpi: add missing inlines in libata.hLin Ming1-3/+3
Adds inline for ata_acpi_unregister/ata_acpi_bind/ata_acpi_unbind in drivers/ata/libata.h for !CONFIG_ATA_ACPI to fix below warnings. warning: 'ata_acpi_unregister' defined but not used [-Wunused-function] warning: 'ata_acpi_bind' defined but not used [-Wunused-function] warning: 'ata_acpi_unbind' defined but not used [-Wunused-function] Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-20[SCSI] libata, libsas: introduce sched_eh and end_eh port opsDan Williams2-11/+50
When managing shost->host_eh_scheduled libata assumes that there is a 1:1 shost-to-ata_port relationship. libsas creates a 1:N relationship so it needs to manage host_eh_scheduled cumulatively at the host level. The sched_eh and end_eh port port ops allow libsas to track when domain devices enter/leave the "eh-pending" state under ha->lock (previously named ha->state_lock, but it is no longer just a lock for ha->state changes). Since host_eh_scheduled indicates eh without backing commands pinning the device it can be deallocated at any time. Move the taking of the domain_device reference under the port_lock to guarantee that the ata_port stays around for the duration of eh. Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-06-29libata: tell scsi layer device supports runtime power offAaron Lu1-2/+26
If ATA device supports "Device Attention", then tell scsi layer that the device supports runtime power off. Signed-off-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29libata: detect Device Attention supportLin Ming1-0/+3
Add a new flag ATA_DFLAG_DA to indicate that device supports "Device Attention". Acked-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29libata-acpi: register/unregister device to/from power resourceLin Ming1-0/+32
Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29libata-acpi: add ata port runtime D3Cold supportLin Ming3-4/+81
ATA port may support runtime D3Cold state, for example, Zero-power ODD case. This patch adds wakeup notifier and enable/disable run_wake during supend/resume. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29libata-acpi: set acpi state for SATA portLin Ming1-9/+11
Currently, ata_acpi_set_state() only sets acpi sate for IDE port. Remove this limitation. Acked-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29libata: migrate ACPI code over to new bindingsMatthew Garrett5-139/+38
Now that we have the ability to directly glue the ACPI namespace to the driver model in libata, we don't need the custom code to handle the same thing. Remove it and migrate the functions over to the new code. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Holger Macht <holger@homac.de> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29libata: bind the Linux device tree to the ACPI device treeMatthew Garrett3-2/+146
Associate the ACPI device tree and libata devices. This patch uses the generic ACPI glue framework to do so. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Holger Macht <holger@homac.de> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-20Viresh has movedViresh Kumar1-2/+2
viresh.kumar@st.com email-id doesn't exist anymore as I have left the company. Replace ST's id with viresh.linux@gmail.com. It also updates .mailmap file to fix address for 'git shortlog' Signed-off-by: Viresh Kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-26Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-4/+36
Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ...
2012-05-22PATA host controller driver for ep93xxRafal Prylowski3-0/+1054
Add PATA host controller driver for ep93xx. Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl> Cc: Joao Ramos <joao.ramos@inov.pt> Cc: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-22[libata] Add " 2GB ATA Flash Disk"/"ADMA428M" to DMA blacklistPrarit Bhargava1-0/+1
A user has several systems with a couple of models of flash disks with IDE connectors. These disks work fine in 2.6.18-ish kernels but corrupt data on new kernels. The difference appears to be with the default I/O method used by the IDE controller driver between the kernels. In the older kernels, the configuration is very conservative and the driver stays in PIO mode. With new kernels, the ata driver (pata_serverworks) attempts to use UDMA/66 which the drive claims to support. This mode, however, does not appear to work in DMA mode. The drive does work correctly and no corruption is seen if the kernel parameter "libata.force=5:pio0,6:pio0" is used to force the driver to use PIO instead of DMA mode. Blacklist these drives. Unfortunately the model name of the drive is very generic, " 2GB ATA Flash Disk", but the revision is specific, "ADMA428M". Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-22ata_generic: Skip is_intel_ider() check when ata_generic=1 is setAndi Kleen1-1/+1
When ata_generic_ide=1 is set don't do the is_intel_ider() magic check. We found at least one box who needed that. Cc: alan@linux.intel.com Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-16Merge branch 'clk-next' of git://git.linaro.org/people/mturquette/linux into ↵Arnd Bergmann1-4/+36
next/clock * 'clk-next' of git://git.linaro.org/people/mturquette/linux: clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ARM: Orion: SDIO: Add support for clk. ARM: Orion: NAND: Add support for clk, if there is one. ARM: Orion: EHCI: Add support for enabling clocks ARM: Orion: SATA: Add per channel clk/clkdev support. ARM: Orion: UART: Get the clock rate via clk_get_rate(). ARM: Orion: WDT: Add clk/clkdev support ARM: Orion: Eth: Add clk/clkdev support. ARM: Orion: SPI: Add clk/clkdev support. ARM: Orion: Add clocks using the generic clk infrastructure. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-08ARM: Orion: SATA: Add per channel clk/clkdev support.Andrew Lunn1-4/+36
The Orion kirkwood chips have a gatable clock per SATA channel. Add code to get and enable this clk if it exists. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-07libata-eh don't waste time retrying media errors (v3)Mark Lord1-3/+21
ATA and SATA drives have had built-in retries for media errors for as long as they've been commonplace in computers (early 1990s). When libata stumbles across a bad sector, it can waste minutes sitting there doing retry after retry before finally giving up and letting the higher layers deal with it. This patch removes retries for media errors only. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-07ata_piix: defer disks to the Hyper-V drivers by defaultAndy Whitcroft1-0/+36
When we are hosted on a Microsoft Hyper-V hypervisor the guest disks are exposed both via the Hyper-V paravirtualised drivers and via an emulated SATA disk drive. In this case we want to use the paravirtualised drivers if we can as they are much more efficient. Note that the Hyper-V paravirtualised drivers only expose the virtual hard disk devices, the CDROM/DVD devices must still be enumerated. Mark the host controller ATA_HOST_IGNORE_ATA to prevent enumeration of disk devices. BugLink: http://bugs.launchpad.net/bugs/929545 BugLink: http://bugs.launchpad.net/bugs/942316 Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-07libata: add a host flag to ignore detected ATA devicesAndy Whitcroft1-0/+6
Where devices are visible via more than one host we sometimes wish to indicate that cirtain devices should be ignored on a specific host. Add a host flag indicating that this host wishes to ignore ATA specific devices. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-03Merge tag 'tag/upstream-linus' of ↵Linus Torvalds5-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata fixes from Jeff Garzik: 1) Fix regression that could cause a misdiagnosis, which in turn could lead to an erroneous 3.0 Gbps -> 1.5 downshift, particularly when hotplug and suspend/resume is involved. 2) Fix a regression that led to ata%d controller ids being numbered one larger than in <= 3.4-rc3 (oh, the horror!). Controller ids should now be as expected. 3) add some DT, PCI id's 4) ata/pata_arasan_cf: minor cpp fixing/cleaning * tag 'tag/upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata: ahci_platform: Add synopsys ahci controller in DT's compatible list ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros libata: init ata_print_id to 0 ahci: Detect Marvell 88SE9172 SATA controller libata: skip old error history when counting probe trials
2012-05-03ata: ahci_platform: Add synopsys ahci controller in DT's compatible listViresh Kumar1-0/+1
SPEAr13xx series of SoCs contain Synopsys AHCI SATA Controller which shares ahci_platform driver with other controller versions. This patch updates DT compatible list for ahci_platform. It also updates and renames binding documentation to more generic name. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-03ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macrosViresh Kumar1-3/+1
#ifdef, #endif is not required in definition/usage of arasan_cf_pm_ops. So, move this definition and its usage outside of them. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-03libata: init ata_print_id to 0Tero Roponen1-1/+1
When comparing the dmesg between 3.4-rc3 and 3.4-rc4 I found the following differences: -ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47 -ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47 -ata3: DUMMY +ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47 +ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47 ata4: DUMMY ata5: DUMMY -ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47 +ata6: DUMMY +ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47 The change of numbering comes from commit 85d6725b7c0d7e3f ("libata: make ata_print_id atomic") that changed lines like ap->print_id = ata_print_id++; to ap->print_id = atomic_inc_return(&ata_print_id); As the latter behaves like ++ata_print_id, we must initialize it to zero to start the numbering from one. Signed-off-by: Tero Roponen <tero.roponen@gmail.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-03ahci: Detect Marvell 88SE9172 SATA controllerMatt Johnson1-0/+2
The Marvell 88SE9172 SATA controller (PCI ID 1b4b 917a) already worked once it was detected, but was missing an ahci_pci_tbl entry. Boot tested on a Gigabyte Z68X-UD3H-B3 motherboard. Signed-off-by: Matt Johnson <johnso87@illinois.edu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-03libata: skip old error history when counting probe trialsLin Ming1-1/+2
Commit d902747("[libata] Add ATA transport class") introduced ATA_EFLAG_OLD_ER to mark entries in the error ring as cleared. But ata_count_probe_trials_cb() didn't check this flag and it still counts the old error history. So wrong probe trials count is returned and it causes problem, for example, SATA link speed is slowed down from 3.0Gbps to 1.5Gbps. Fix it by checking ATA_EFLAG_OLD_ER in ata_count_probe_trials_cb(). Cc: stable <stable@vger.kernel.org> # 2.6.37+ Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 05:05:23 +0000