summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)AuthorFilesLines
2009-05-05Merge branch 'merge' of ↵Linus Torvalds1-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix setting of oprofile cpu type powerpc: Update MPC5xxx and Xilinx Virtex maintainer entries powerpc adjust oprofile_cpu_type version 3
2009-05-02Move dtc and libfdt sources from arch/powerpc/boot to scripts/dtcDavid Gibson31-11152/+28
The powerpc kernel always requires an Open Firmware like device tree to supply device information. On systems without OF, this comes from a flattened device tree blob. This blob is usually generated by dtc, a tool which compiles a text description of the device tree into the flattened format used by the kernel. Sometimes, the bootwrapper makes small changes to the pre-compiled device tree blob (e.g. filling in the size of RAM). To do this it uses the libfdt library. Because these are only used on powerpc, the code for both these tools is included under arch/powerpc/boot (these were imported and are periodically updated from the upstream dtc tree). However, the microblaze architecture, currently being prepared for merging to mainline also uses dtc to produce device tree blobs. A few other archs have also mentioned some interest in using dtc. Therefore, this patch moves dtc and libfdt from arch/powerpc into scripts, where it can be used by any architecture. The vast bulk of this patch is a literal move, the rest is adjusting the various Makefiles to use dtc and libfdt correctly from their new locations. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02of: make of_(un)register_platform_driver common codeGrant Likely1-10/+0
Some drivers using of_register_platform_driver() wrapper break on sparc because the wrapper isn't in the header file. This patch moves it from Microblaze and PowerPC implementations and makes it common code. Fixes this sparc64 allmodconfig build error (at least): drivers/leds/leds-gpio.c: In function `gpio_led_init': drivers/leds/leds-gpio.c:295: error: implicit declaration of function `of_register_platform_driver' drivers/leds/leds-gpio.c: In function `gpio_led_exit': drivers/leds/leds-gpio.c:311: error: implicit declaration of function `of_unregister_platform_driver' Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-01powerpc: Fix setting of oprofile cpu typeBenjamin Herrenschmidt1-2/+2
commit 2657dd4e301d4841ed67a4fac7d145ad8f3e1b28 introduced a bug where we would now always override the "real" oprofile CPU type with the "compatible" one provided by a pseudo-PVR in the device-tree which is incorrect and breaks oprofile on all current configs since the "compatible" ones aren't yet recognized. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-01powerpc adjust oprofile_cpu_type version 3Michael Wolf1-4/+9
Oprofile is changing the naming it is using for the compatibility modes. Instead of having compat-power<x>, oprofile will go to family naming convention and use ibm-compat-v<x>. Currently only ibm-compat-v1 will be defined. The notion of compatibility events just started with POWER6. So there is no way that any other tool could exist that is using these oprofile_cpu_type strings we want to change. Signed-off-by: Mike Wolf <mjw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-04-28Merge branch 'merge' of ↵Linus Torvalds9-49/+53
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc/ps3: Fix build error on UP powerpc/cell: Select PCI for IBM_CELL_BLADE AND CELLEB powerpc: ppc32 needs elf_read_implies_exec() powerpc/86xx: Add device_type entry to soc for ppc9a powerpc/44x: Correct memory size calculation for denali-based boards maintainers: Fix PowerPC 4xx git tree powerpc: fix for long standing bug noticed by gcc 4.4.0 Revert "powerpc: Add support for early tlbilx opcode"
2009-04-28powerpc: Revert switch to TEXT_TEXT in linker scriptTim Abbott1-2/+2
Commit edada399 broke the build on 64-bit powerpc because it moved the __ftr_alt_* sections of a file away from the .text section, causing link failures due to relative conditional branch targets being too far away from the branch instructions. This happens on pretty much all 64-bit powerpc configs. This change reverts commit edada399 while preserving the update from the *.refok sections to .ref.text that has happened since. Signed-off-by: Tim Abbott <tabbott@mit.edu> Requested-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-28powerpc/ps3: Fix build error on UPGeoff Levand1-4/+0
A non-SMP version of smp_send_stop() is now included in smp.h. Remove the unneeded definition in the PS3 smp.c. Fixes build errors like these when CONFIG_SMP=n: arch/powerpc/platforms/ps3/setup.c:49: error: redefinition of 'smp_send_stop' include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-28powerpc/cell: Select PCI for IBM_CELL_BLADE AND CELLEBMichael Ellerman1-1/+4
Currently PPC_CELL_NATIVE selects PPC_OF_PLATFORM_PCI, but does not select PCI. This can lead to a config with the former and the latter disabled, which does not build. To fix this PPC_CELL_NATIVE should select PCI. However, that would force PCI on for QPACE, which also selects PPC_CELL_NATIVE. So instead move the select of PPC_OF_PLATFORM_PCI and PCI under both IBM_CELL_BLADE and CELLEB. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-28powerpc: ppc32 needs elf_read_implies_exec()Kumar Gala1-0/+1
On ppc64 we implemented elf_read_implies_exec() for 32-bit binaries because old toolchains had bugs where they didn't mark program segments executable that needed to be. For some reason we didn't do this on ppc32 builds. This hadn't been an issue until commit 8d30c14c ("powerpc/mm: Rework I$/D$ coherency (v3)"), which had as a side effect that we are now enforcing execute permissions to some extent on 32-bit 4xx and Book E processors. This fixes it by defining elf_read_implies_exec on 32-bit to turn on the read-implies-exec behaviour on programs that are sufficiently old that they don't have a PT_GNU_STACK program header. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-27powerpc: Use __REF macro instead of old .text.init.refok.Tim Abbott1-2/+3
The section .text.init.refok is deprecated and __REF (.ref.text) should be used in assembly files instead. This patch cleans up a few uses of .text.init.refok in the powerpc architecture. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-27powerpc: Use TEXT_TEXT macro in linker script.Tim Abbott1-1/+2
Rather than adding .ref.text to the powerpc linker script so that we can use __REF on the powerpc architecture, it seems simpler to switch to using the generic TEXT_TEXT macro. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-28Merge branch 'merge' of ↵Paul Mackerras1-13/+43
git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge
2009-04-27powerpc/86xx: Add device_type entry to soc for ppc9aMartyn Welch1-0/+1
The 'device_type = "soc";' line *is* needed in the DTS for get_immrbase() to return the correct address. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-26powerpc: convert to use __HEAD and HEAD_TEXT macros.Tim Abbott6-6/+11
This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-24Merge branch 'merge' of ↵Linus Torvalds19-5360/+795
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: Fix modular build of ide-pmac when mediabay is built in powerpc/pasemi: Fix build error on UP powerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK maintainers: Fix PS3 patterns powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning powerpc/32: Don't clobber personality flags on exec powerpc: Fix crash on CPU hotplug powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig cover powerpc/85xx: Added SMP defconfig powerpc/85xx: Enabled a bunch of FSL specific drivers/options powerpc/85xx: Updated generic mpc85xx_defconfig powerpc: don't disable SATA interrupts on Freescale MPC8610 HPCD fsl_rio: Pass the proper device to dma mapping routines powerpc: Fix of_node_put() exit path in of_irq_map_one() powerpc/5200: defconfig updates powerpc/5200: Add FLASH nodes to lite5200 device tree powerpc/device-tree: Document MTD nodes with multiple "reg" tuples powerpc/of-device-tree: Factor MTD physmap bindings out of booting-without-of powerpc/5200: Bring the legacy fsl_spi_platform_data hooks back
2009-04-24powerpc/44x: Correct memory size calculation for denali-based boardsValentine Barshak1-13/+43
Some U-Boot versions incorrectly set the number of chipselects to two for Sequoia/Rainier boards while they only have one chipselect hardwired. This patch adds a workaround for this, hardcoding the number of chipselects to one for sequioa/rainer board models and reading the actual value from the memory controller register DDR0_10 otherwise. It also fixes another error in the way ibm4xx_denali_fixup_memsize calculates memory size. When testing the DDR_REDUC bit, the polarity is backwards. A "1" implies 32-bit wide memory while a "0" implies 64-bit wide memory. Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua> Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Steven A. Falco <sfalco@harris.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-04-23powerpc: fix for long standing bug noticed by gcc 4.4.0Stephen Rothwell1-1/+1
Previous gcc versions didn't notice this because one of the preceding #ifs always evaluated to true. gcc 4.4.0 produced this error: arch/powerpc/mm/tlb_nohash_low.S:206:6: error: #elif with no expression Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-23Revert "powerpc: Add support for early tlbilx opcode"Kumar Gala4-30/+3
This reverts commit e9965577406a2148ade97b5e0ce7c448b4ba4ef6. Our HW guys were able to fix this so it never sees the light of day. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-22powerpc/pasemi: Fix build error on UPGeoff Levand1-4/+0
A non-SMP version of smp_send_stop() is now included in smp.h. Remove the unneeded definition in the pasemi setup.c. Fixes build errors like these when CONFIG_SMP=n: arch/powerpc/platforms/pasemi/setup.c:48: error: redefinition of ‘smp_send_stop’ include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here Reported-by: subrata@linux.vnet.ibm.com Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-22powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warningGeoff Levand1-1/+1
Fix build warnings like these when CONFIG_PS3_FLASH=n: arch/powerpc/platforms/ps3/os-area.c: warning: 'update_flash_db' defined but not used Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-22powerpc/32: Don't clobber personality flags on execAndreas Schwab1-1/+2
Now that ppc32 implements address randomization it also wants to inherit personality flags like ADDR_NO_RANDOMIZE across exec, for things like `setarch ppc -R' to work. But the ppc32 version of SET_PERSONALITY forcefully sets PER_LINUX, clearing all personality flags. So be careful about preserving the flags. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-22powerpc: Fix crash on CPU hotplugMichael Ellerman1-1/+1
early_init_mmu_secondary() is called at CPU hotplug time, so it must be marked as __cpuinit, not __init. Caused by 757c74d2 ("powerpc/mm: Introduce early_init_mmu() on 64-bit"). Tested-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-22Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6 into mergePaul Mackerras18-147/+494
2009-04-21powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig coverKumar Gala4-6707/+0
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-21powerpc/85xx: Added SMP defconfigKumar Gala1-0/+1829
Since the vast majority of 85xx platforms are UP we introduce a new SMP config for the few platforms that have more than one core. Beyond CONFIG_SMP=y and its dependencies this should be identical to mpc85xx_defconfig. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-21powerpc/85xx: Enabled a bunch of FSL specific drivers/optionsKumar Gala1-16/+27
* Add new 85xx boards * Added QE/FSL gpio * Enabled PHY drivers that exist on various boards * Enabled FS_ENET & UCC ethernet drivers (CPM2 & QE) * FSL HW Crypto Engine * CPM I2C * QE Serial Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-21powerpc/85xx: Updated generic mpc85xx_defconfigKumar Gala1-125/+88
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-21clocksource: pass clocksource to read() callbackMagnus Damm1-4/+4
Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21powerpc: don't disable SATA interrupts on Freescale MPC8610 HPCDTimur Tabi1-5/+0
The ULI 1575 PCI quirk function for the Freescale MPC8610 HPCD was disabling the SATA INTx interrupt, even when SATA support was enabled. This was safe, because the SATA driver re-enabled it. But with commit a5bfc471 ("ahci: drop intx manipulation on msi enable"), the driver no longer does this, and so SATA support on the 8610 HPCD is broken. The original quirk function disabled INTx because it caused some other interrupt problem during early development on this board, but no one remembers any more what that problem was, and it doesn't seem to occur any more. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-21fsl_rio: Pass the proper device to dma mapping routinesAnton Vorontsov1-11/+17
The driver should pass a device that specifies internal DMA ops, but currently NULL pointer is passed, therefore following bug appears during boot up: ------------[ cut here ]------------ Kernel BUG at c0018a7c [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] [...] NIP [c0018a7c] fsl_rio_doorbell_init+0x34/0x60 LR [c0018a70] fsl_rio_doorbell_init+0x28/0x60 Call Trace: [ef82bda0] [c0018a70] fsl_rio_doorbell_init+0x28/0x60 (unreliable) [ef82bdc0] [c0019160] fsl_rio_setup+0x6b8/0x84c [ef82be20] [c02d28ac] fsl_of_rio_rpn_probe+0x30/0x50 [ef82be40] [c0234f20] of_platform_device_probe+0x5c/0x84 [...] ---[ end trace 561bb236c800851f ]--- This patch fixes the issue. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-20powerpc: Fix of_node_put() exit path in of_irq_map_one()Ilpo Järvinen1-6/+5
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-04-20powerpc/5200: defconfig updatesGrant Likely6-125/+428
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-04-16powerpc/5200: Add FLASH nodes to lite5200 device treeGrant Likely1-0/+39
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-04-15Merge branch 'merge' of ↵Linus Torvalds16-144/+105
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: pseries/dtl.c should include asm/firmware.h powerpc: Fix data-corrupting bug in __futex_atomic_op powerpc/pseries: Set error_state to pci_channel_io_normal in eeh_report_reset() powerpc: Allow 256kB pages with SHMEM powerpc: Document new FSL I2C bindings and cleanup powerpc/mm: Fix compile warning powerpc/85xx: TQM8548: update defconfig powerpc/85xx: TQM8548: use proper phy-handles for enet2 and enet3 powerpc/85xx: TQM85xx: correct address of LM75 I2C device nodes powerpc: Add support for early tlbilx opcode powerpc: Fix tlbilx opcode
2009-04-15powerpc: pseries/dtl.c should include asm/firmware.hSachin Sant1-0/+1
A randconfig build on powerpc failed with: dtl.c: In function 'dtl_init': dtl.c:238: error: implicit declaration of function 'firmware_has_feature' dtl.c:238: error: 'FW_FEATURE_SPLPAR' undeclared (first use in this function) - We need firmware.h for these definitions. Signed-off-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-15powerpc: Fix data-corrupting bug in __futex_atomic_opPaul Mackerras1-6/+6
Richard Henderson pointed out that the powerpc __futex_atomic_op has a bug: it will write the wrong value if the stwcx. fails and it has to retry the lwarx/stwcx. loop, since 'oparg' will have been overwritten by the result from the first time around the loop. This happens because it uses the same register for 'oparg' (an input) as it uses for the result. This fixes it by using separate registers for 'oparg' and 'ret'. Cc: stable@kernel.org Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-15powerpc/pseries: Set error_state to pci_channel_io_normal in eeh_report_reset()Mike Mason1-0/+2
While adding native EEH support to Emulex and Qlogic drivers, it was discovered that dev->error_state was set to pci_io_channel_normal too late in the recovery process. These drivers rely on error_state to determine if they can access the device in their slot_reset callback, thus error_state needs to be set to pci_io_channel_normal in eeh_report_reset(). Below is a detailed explanation (courtesy of Richard Lary) as to why this is necessary. Background: PCI MMIO or DMA accesses to a frozen slot generate additional EEH errors. If the number of additional EEH errors exceeds EEH_MAX_FAILS the adapter will be shutdown. To avoid triggering excessive EEH errors and an undesirable adapter shutdown, some drivers use the pci_channel_offline(dev) wrapper function to return a Boolean value based on the value of pci_dev->error_state to determine if PCI MMIO or DMA accesses are safe. If the wrapper returns TRUE, drivers must not make PCI MMIO or DMA access to their hardware. The pci_dev structure member error_state reflects one of three values, 1) pci_channel_io_normal, 2) pci_channel_io_frozen, 3) pci_channel_io_perm_failure. Function pci_channel_offline(dev) returns TRUE if error_state is pci_channel_io_frozen or pci_channel_io_perm_failure. The EEH driver sets pci_dev->error_state to pci_channel_io_frozen at the point where the PCI slot is frozen. Currently, the EEH driver restores dev->error_state to pci_channel_io_normal in eeh_report_resume() before calling the driver's resume callback. However, when the EEH driver calls the driver's slot_reset callback() from eeh_report_reset(), it incorrectly indicates the error state is still pci_channel_io_frozen. Waiting until eeh_report_resume() to restore dev->error_state to pci_channel_io_normal is too late for Emulex and QLogic FC drivers and any other drivers which are designed to use common code paths in these two cases: i) those called after the driver's slot_reset callback() and ii) those called after the PCI slot is frozen but before the driver's slot_reset callback is called. Case i) all driver paths executed to reinitialize the hardware after a reset and case ii) all code paths executed by driver kernel threads that run asynchronous to the main driver thread, such as interrupt handlers and worker threads to process driver work queues. Emulex and QLogic FC drivers are designed with common code paths which require that pci_channel_offline(dev) reflect the true state of the hardware. The state transitions that the hardware takes from Normal Operations to Slot Frozen to Reset to Normal Operations are documented in the Power Architecture™ Platform Requirements+ (PAPR+) in Table 75. PE State Control. PAPR defines the following 3 states: 0 -- Not reset, Not EEH stopped, MMIO load/store allowed, DMA allowed (Normal Operations) 1 -- Reset, Not EEH stopped, MMIO load/store disabled, DMA disabled 2 -- Not reset, EEH stopped, MMIO load/store disabled, DMA disabled (Slot Frozen) An EEH error places the slot in state 2 (Frozen) and the adapter driver is notified that an EEH error was detected. If the adapter driver returns PCI_ERS_RESULT_NEED_RESET, the EEH driver calls eeh_reset_device() to place the slot into state 1 (Reset) and eeh_reset_device completes by placing the slot into State 0 (Normal Operations). Upon return from eeh_reset_device(), the EEH driver calls eeh_report_reset, which then calls the adapter's slot_reset callback. At the time the adapter's slot_reset callback is called, the true state of the hardware is Normal Operations and should be accurately reflected by setting dev->error_state to pci_channel_io_normal. The current implementation of EEH driver does not do so and requires this change to correct this deficiency. Signed-off-by: Mike Mason <mmlnx@us.ibm.com> Acked-by: Linas Vepstas <linasvepstas@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-15powerpc: Allow 256kB pages with SHMEMHugh Dickins1-1/+1
Now that shmem's divisions by zero and SHMEM_MAX_BYTES are fixed, let powerpc 256kB pages coexist with CONFIG_SHMEM again. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-14parport_pc: Fix build failure drivers/parport/parport_pc.c for powerpcTony Breeds1-1/+1
In commit 51dcdfec6a274afc1c6fce180d582add9ff512c0 ("parport: Use the PCI IRQ if offered") parport_pc_probe_port() gained an irqflags arg. This isn't being supplied on powerpc. This patch make powerpc fallback to the old behaviour, that is using "0" for irqflags. Fixes build failure: In file included from drivers/parport/parport_pc.c:68: arch/powerpc/include/asm/parport.h: In function 'parport_pc_find_nonpci_ports': arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port' arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port' arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port' make[3]: *** [drivers/parport/parport_pc.o] Error 1 Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07powerpc/mm: Fix compile warningKumar Gala1-1/+0
arch/powerpc/mm/tlb_nohash.c: In function 'flush_tlb_mm': arch/powerpc/mm/tlb_nohash.c:128: warning: unused variable 'cpu_mask' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-07Merge branch 'i2c-for-2630-v2' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds1-4/+4
* 'i2c-for-2630-v2' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c: imx: Make disable_delay a per-device variable i2c: xtensa s6000 i2c driver powerpc/85xx: i2c-mpc: use new I2C bindings for the Socates board i2c: i2c-mpc: make I2C bus speed configurable i2c: i2c-mpc: use dev based printout function i2c: i2c-mpc: various coding style fixes i2c: imx: Add missing request_mem_region in probe() i2c: i2c-s3c2410: Initialise Samsung I2C controller early i2c-s3c2410: Simplify bus frequency calculation i2c-s3c2410: sda_delay should be in ns, not clock ticks i2c: iMX/MXC support
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang4-5/+5
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang1-1/+1
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Merge branch 'merge' of ↵Linus Torvalds31-79/+181
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (28 commits) powerpc: Fix oops when loading modules powerpc: Wire up preadv and pwritev powerpc/ftrace: Fix printf format warning powerpc/ftrace: Fix #if that should be #ifdef powerpc: Fix ptrace compat wrapper for FPU register access powerpc: Print information about mapping hw irqs to virtual irqs powerpc: Correct dependency of KEXEC powerpc: Disable VSX or current process in giveup_fpu/altivec powerpc/pseries: Enable relay in pseries_defconfig powerpc/pseries: Fix ibm,client-architecture comment powerpc/pseries: Scan for all events in rtasd powerpc/pseries: Add dispatch dispersion statistics powerpc: Clean up some prom printouts powerpc: Print progress of ibm,client-architecture method powerpc: Remove duplicated #include's powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBook powerpc/wdrtas: Update wdrtas_get_interval to use rtas_data_buf fsl-diu-fb: Pass the proper device for dma mapping routines powerpc/pq2fads: Update device tree for use with device-tree-aware u-boot. cpm_uart: Disable CPM udbg when re-initing CPM uart, even if not the console. ...
2009-04-07powerpc/85xx: i2c-mpc: use new I2C bindings for the Socates boardWolfgang Grandegger1-4/+4
Preserve I2C clock settings for the Socrates MPC8544 board. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07powerpc/85xx: TQM8548: update defconfigWolfgang Grandegger1-116/+48
Enable highmem support for the TQM8548-AG modules and NAND support for the TQM8548-BE modules. Furthermore disable USB, Wireless and IDE support because it's not available on the STK85xx starter kit. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-07powerpc/85xx: TQM8548: use proper phy-handles for enet2 and enet3Wolfgang Grandegger2-4/+4
For enet2 and enet3 the wrong phy-handles have been used in DTS files of the TQM8548 modules. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-07powerpc/85xx: TQM85xx: correct address of LM75 I2C device nodesWolfgang Grandegger6-12/+12
Commit 0f73a449a649acfca91404a98a35353a618b9555 added I2C device nodes for the LM75 thermal sensor on the TQM85xx modules, unfortunately with the wrong I2C address. The LM75s are located at address 0x48. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-07powerpc: Add support for early tlbilx opcodeKumar Gala4-3/+30
During the ISA 2.06 development the opcode for tlbilx changed and some early implementations used to old opcode. Add support for a MMU_FTR fixup to deal with this. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 21:06:23 +0000