summaryrefslogtreecommitdiff
path: root/arch/c6x/kernel
AgeCommit message (Collapse)AuthorFilesLines
2012-10-01sanitize tsk_is_polling()Al Viro1-1/+0
Make default just return 0. The current default (checking TIF_POLLING_NRFLAG) is taken to architectures that need it; ones that don't do polling in their idle threads don't need to defined TIF_POLLING_NRFLAG at all. ia64 defined both TS_POLLING (used by its tsk_is_polling()) and TIF_POLLING_NRFLAG (not used at all). Killed the latter... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-01c6x: switch to generic kernel_thread()Al Viro1-19/+5
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-01c6x: switch to generic sys_execveMark Salter2-45/+0
Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-01c6x: switch to generic kernel_execveMark Salter1-7/+6
Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-01c6x: add ret_from_kernel_thread(), simplify kernel_thread()Mark Salter2-26/+32
Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+1
Pull networking changes from David S Miller: 1) Remove the ipv4 routing cache. Now lookups go directly into the FIB trie and use prebuilt routes cached there. No more garbage collection, no more rDOS attacks on the routing cache. Instead we now get predictable and consistent performance, no matter what the pattern of traffic we service. This has been almost 2 years in the making. Special thanks to Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who have helped along the way. I'm sure that with a change of this magnitude there will be some kind of fallout, but such things ought the be simple to fix at this point. Luckily I'm not European so I'll be around all of August to fix things :-) The major stages of this work here are each fronted by a forced merge commit whose commit message contains a top-level description of the motivations and implementation issues. 2) Pre-demux of established ipv4 TCP sockets, saves a route demux on input. 3) TCP SYN/ACK performance tweaks from Eric Dumazet. 4) Add namespace support for netfilter L4 conntrack helpers, from Gao Feng. 5) Add config mechanism for Energy Efficient Ethernet to ethtool, from Yuval Mintz. 6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet. 7) Support for connection tracker helpers in userspace, from Pablo Neira Ayuso. 8) Allow userspace driven TX load balancing functions in TEAM driver, from Jiri Pirko. 9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with embedded gotos. 10) TCP Small Queues, essentially minimize the amount of TCP data queued up in the packet scheduler layer. Whereas the existing BQL (Byte Queue Limits) limits the pkt_sched --> netdevice queuing levels, this controls the TCP --> pkt_sched queueing levels. From Eric Dumazet. 11) Reduce the number of get_page/put_page ops done on SKB fragments, from Alexander Duyck. 12) Implement protection against blind resets in TCP (RFC 5961), from Eric Dumazet. 13) Support the client side of TCP Fast Open, basically the ability to send data in the SYN exchange, from Yuchung Cheng. Basically, the sender queues up data with a sendmsg() call using MSG_FASTOPEN, then they do the connect() which emits the queued up fastopen data. 14) Avoid all the problems we get into in TCP when timers or PMTU events hit a locked socket. The TCP Small Queues changes added a tcp_release_cb() that allows us to queue work up to the release_sock() caller, and that's what we use here too. From Eric Dumazet. 15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits) genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP r8169: revert "add byte queue limit support". ipv4: Change rt->rt_iif encoding. net: Make skb->skb_iif always track skb->dev ipv4: Prepare for change of rt->rt_iif encoding. ipv4: Remove all RTCF_DIRECTSRC handliing. ipv4: Really ignore ICMP address requests/replies. decnet: Don't set RTCF_DIRECTSRC. net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse. ipv4: Remove redundant assignment rds: set correct msg_namelen openvswitch: potential NULL deref in sample() tcp: dont drop MTU reduction indications bnx2x: Add new 57840 device IDs tcp: avoid oops in tcp_metrics and reset tcpm_stamp niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value niu: Fix to check for dma mapping errors. net: Fix references to out-of-scope variables in put_cmsg_compat() net: ethernet: davinci_emac: add pm_runtime support net: ethernet: davinci_emac: Remove unnecessary #include ...
2012-07-18C6X: clean up compiler warningMark Salter1-2/+0
commit a610d6e6: pull clearing RESTORE_SIGMASK into block_sigmask() left behind a compiler warning: arch/c6x/kernel/signal.c:252:6: warning: unused variable 'ret' This patch cleans up the warning by removing the unused variable. Signed-off-by: Mark Salter <msalter@redhat.com>
2012-07-18C6X: add basic support for TMS320C6678 SoCKen Cox1-0/+4
This patch adds support for the TMS320C6678 SoC on an EVMC6678LE evaluation board. The 6678 is a C66x family CPU which is very similar to the already supported C64x CPUs with the addition of floating point instructions. Signed-off-by: Ken Cox <jkc@redhat.com> Signed-off-by: Mark Salter <msalter@redhat.com> CC: Aurelien Jacquiot <a-jacquiot@ti.com> CC: linux-c6x-dev@linux-c6x.org
2012-07-18C6X: remove dependence on legacy IRQsMark Salter1-11/+10
The core priority PIC code uses legacy irq support to facilitate direct mapping of core hw interrupt numbers to linux interrupt numbers. This patch removes the legacy irq usage and replaces it with a generic linear mapping. Signed-off-by: Mark Salter <msalter@redhat.com>
2012-07-16arch: Use eth_random_addrJoe Perches1-1/+1
Convert the existing uses of random_ether_addr to the new eth_random_addr. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-01new helper: signal_delivered()Al Viro1-2/+1
Does block_sigmask() + tracehook_signal_handler(); called when sigframe has been successfully built. All architectures converted to it; block_sigmask() itself is gone now (merged into this one). I'm still not too happy with the signature, but that's a separate story (IMO we need a structure that would contain signal number + siginfo + k_sigaction, so that get_signal_to_deliver() would fill one, signal_delivered(), handle_signal() and probably setup...frame() - take one). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from setAl Viro1-3/+0
Only 3 out of 63 do not. Renamed the current variant to __set_current_blocked(), added set_current_blocked() that will exclude unblockable signals, switched open-coded instances to it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is setAl Viro1-2/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01pull clearing RESTORE_SIGMASK into block_sigmask()Al Viro1-17/+6
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01new helper: sigmask_to_save()Al Viro1-11/+3
replace boilerplate "should we use ->saved_sigmask or ->blocked?" with calls of obvious inlined helper... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01new helper: restore_saved_sigmask()Al Viro1-4/+1
first fruits of ..._restore_sigmask() helpers: now we can take boilerplate "signal didn't have a handler, clear RESTORE_SIGMASK and restore the blocked mask from ->saved_mask" into a common helper. Open-coded instances switched... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-23move key_repace_session_keyring() into tracehook_notify_resume()Al Viro1-2/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21c6x: ->restart_block.fn needs to be reset on rt_sigreturnAl Viro1-0/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-05c6x: Use generic init_taskThomas Gleixner1-16/+0
Same code. Use the generic version. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-and-tested-by: Mark Salter <msalter@redhat.com> Link: http://lkml.kernel.org/r/20120503085034.412398724@linutronix.de
2012-04-10irq: Kill pointless irqd_to_hw exportGrant Likely1-13/+0
It makes no sense to export this trivial function. Make it a static inline instead. This patch also drops virq_to_hw from arch/c6x since it is unused by that architecture. v2: Move irq_hw_number_t into types.h to fix ARM build failure Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-05Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds1-13/+3
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-05C6X: use set_current_blocked() and block_sigmask()Matt Fleming1-13/+3
As described in e6fa16ab9c1e ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0f28f ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28Disintegrate asm/system.h for C6XDavid Howells5-1/+4
Disintegrate asm/system.h for C6X. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Mark Salter <msalter@redhat.com> cc: linux-c6x-dev@linux-c6x.org
2012-03-21Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-598/+14
Pull irq_domain support for all architectures from Grant Likely: "Generialize powerpc's irq_host as irq_domain This branch takes the PowerPC irq_host infrastructure (reverse mapping from Linux IRQ numbers to hardware irq numbering), generalizes it, renames it to irq_domain, and makes it available to all architectures. Originally the plan has been to create an all-new irq_domain implementation which addresses some of the powerpc shortcomings such as not handling 1:1 mappings well, but doing that proved to be far more difficult and invasive than generalizing the working code and refactoring it in-place. So, this branch rips out the 'new' irq_domain and replaces it with the modified powerpc version (in a fully bisectable way of course). It converts all users over to the new API and makes irq_domain selectable on any architecture. No architecture is forced to enable irq_domain, but the infrastructure is required for doing OpenFirmware style irq translations. It will even work on SPARC even though SPARC has it's own mechanism for translating irqs at boot time. MIPS, microblaze, embedded x86 and c6x are converted too. The resulting irq_domain code is probably still too verbose and can be optimized more, but that can be done incrementally and is a task for follow-on patches." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: (31 commits) dt: fix twl4030 for non-dt compile on x86 mfd: twl-core: Add IRQ_DOMAIN dependency devicetree: Add empty of_platform_populate() for !CONFIG_OF_ADDRESS (sparc) irq_domain: Centralize definition of irq_dispose_mapping() irq_domain/mips: Allow irq_domain on MIPS irq_domain/x86: Convert x86 (embedded) to use common irq_domain ppc-6xx: fix build failure in flipper-pic.c and hlwd-pic.c irq_domain/microblaze: Convert microblaze to use irq_domains irq_domain/powerpc: Replace custom xlate functions with library functions irq_domain/powerpc: constify irq_domain_ops irq_domain/c6x: Use library of xlate functions irq_domain/c6x: constify irq_domain structures irq_domain/c6x: Convert c6x to use generic irq_domain support. irq_domain: constify irq_domain_ops irq_domain: Create common xlate functions that device drivers can use irq_domain: Remove irq_domain_add_simple() irq_domain: Remove 'new' irq_domain in favour of the ppc one mfd: twl-core.c: Fix the number of interrupts managed by twl4030 of/address: add empty static inlines for !CONFIG_OF irq_domain: Add support for base irq and hwirq in legacy mappings ...
2012-03-16C6X: remove dead code from entry.SMark Salter1-27/+0
The ENDPROC() on sys_fadvise64_c6x() in arch/c6x/kernel/entry.S is outside of the conditional block with the matching ENTRY() macro. This leads a newer (v2.22 vs. v2.20) assembler to complain: /tmp/ccGZBaPT.s: Assembler messages: /tmp/ccGZBaPT.s: Error: .size expression for sys_fadvise64_c6x does not evaluate to a constant The conditional block became dead code when c6x switched to generic unistd.h and should be removed along with the offending ENDPROC(). Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: David Howells <dhowells@redhat.com>
2012-02-16irq_domain/c6x: Use library of xlate functionsGrant Likely1-0/+1
The c6x irq controllers don't need to define custom .xlate hooks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Mark Salter <msalter@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-02-16irq_domain/c6x: constify irq_domain structuresGrant Likely1-1/+1
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Mark Salter <msalter@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-02-16irq_domain/c6x: Convert c6x to use generic irq_domain support.Mark Salter1-598/+13
The C6X IRQ support was copied almost verbatim from the PowerPC virtual IRQ code. The PowerPC code was used as the basis for generic irq_domain support, so this patch mostly copies what what done to arch/powerpc by Grant Likely in his irq_domain patch series. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-01-08C6X: replace tick_nohz_stop/restart_sched_tick callsMark Salter1-2/+4
The following commits replaced the tick_nohz_{stop,restart}_sched_tick API with separate tick and rcu calls: 280f06774afedf849f0b34248ed6aff57d0f6908 2bbb6817c0ac1b5f2a68d720f364f98eeb1ac4fd 1268fbc746ea1cd279886a740dcbad4ba5232225 This patch replaces the C6X use of the old API with the newer interfaces. Signed-off-by: Mark Salter <msalter@redhat.com>
2012-01-08C6X: add register_cpu callMark Salter1-0/+15
Commit ccbc60d3e19a1b6ae66ca0d89b3da02dde62088b requires CPU topology information even in !SMP cases. This requires C6X to add a call tp register_cpu() in order to avoid a panic at boot time. Signed-off-by: Mark Salter <msalter@redhat.com>
2012-01-08C6X: deal with memblock API changesMark Salter1-3/+0
Recent memblock related commits require the following C6X changes: * commit 24aa07882b672fff2da2f5c955759f0bd13d32d5 asm/memblock.h no longer required * commit 1440c4e2c918532f39131c3330fe2226e16be7b6 memblock_analyze() no longer needed to update total size * commit fe091c208a40299fba40e62292a610fb91e44b4e memblock_init() no longer needed Signed-off-by: Mark Salter <msalter@redhat.com>
2011-10-06C6X: general SoC supportMark Salter1-0/+91
This patch provides a soc_ops struct which provides hooks for SoC functionality which doesn't fit well into other places. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: ptrace supportAurelien Jacquiot1-0/+187
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: loadable module supportAurelien Jacquiot2-0/+189
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: build infrastructureAurelien Jacquiot3-0/+1349
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: syscallsAurelien Jacquiot1-0/+74
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> [msalter@redhat.com: add include of linux/module.h to sys_c6x.c] Signed-off-by: Mark Salter <msalter@redhat.com>
2011-10-06C6X: interrupt handlingAurelien Jacquiot1-0/+728
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: time managementAurelien Jacquiot1-0/+65
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: signal managementAurelien Jacquiot1-0/+377
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: process managementAurelien Jacquiot2-0/+337
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: memory management and DMA supportAurelien Jacquiot1-0/+153
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> The C6X architecture currently lacks an MMU so memory management is relatively simple. There is no bus snooping between L2 and main memory but coherent DMA memory is supported by making regions of main memory uncached. If such a region is desired, it can be specified on the commandline with a "memdma=" argument. Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: devicetree supportMark Salter1-0/+53
This is the basic devicetree support for C6X. Currently, four boards are supported. Each one uses a different SoC part. Two of the four supported SoCs are multicore. One with 3 cores and the other with 6 cores. There is no coherency between the core-level caches, so SMP is not an option. It is possible to run separate kernel instances on the various cores. There is currently no C6X bootloader support for device trees so we build in the DTB for now. There are some interesting twists to the hardware which are of note for device tree support. Each core has its own interrupt controller which is controlled by special purpose core registers. This core controller provides 12 general purpose prioritized interrupt sources. Each core is contained within a hardware "module" which provides L1 and L2 caches, power control, and another interrupt controller which cascades into the core interrupt controller. These core module functions are controlled by memory mapped registers. The addresses for these registers are the same for each core. That is, when coreN accesses a module-level MMIO register at a given address, it accesses the register for coreN even though other cores would use the same address to access the register in the module containing those cores. Other hardware modules (timers, enet, etc) which are memory mapped can be accessed by all cores. The timers need some further explanation for multicore SoCs. Even though all timer control registers are visible to all cores, interrupt routing or other considerations may make a given timer more suitable for use by a core than some other timer. Because of this and the desire to have the same image run on more than one core, the timer nodes have a "ti,core-mask" property which is used by the driver to scan for a suitable timer to use. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: early boot codeAurelien Jacquiot3-0/+663
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> This patch provides the early boot code for C6X architecture. There is a 16 entry vector table which is used to direct reset and interrupt events. The vector table entries contain a small amount of code (maximum of 8 opcodes) which simply branches to the actual event handling code. The head.S code simply clears BSS, setups up a few control registers, and calls machine_init followed by start_kernel. The machine_init code in setup.c does the early flat tree parsing (memory, commandline, etc). At setup_arch time, the code does the usual memory setup and minimally scans the devicetree for any needed information. Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: build infrastructureAurelien Jacquiot2-0/+174
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 05:40:55 +0000