summaryrefslogtreecommitdiff
path: root/arch/arm/include
AgeCommit message (Collapse)AuthorFilesLines
2008-12-18Merge branch 'next-merged' of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King1-4/+6
2008-12-15[ARM] VIC: Update asm/hardware/vic.h with PL192 informationBen Dooks1-4/+6
The original arch/arm/include/asm/hardware/vic.h was written for the PL190 ARM VIC implementation, and as such does not have any information about the PL192 version. Add details about the PL192 and PL190 specific registers and any changes between the two units. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15Merge branch 'omap3-upstream' of ↵Russell King2-7/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2008-12-14[ARM] move asm/xip.h's mach/hardware.h include to mach/xip.hRussell King1-1/+0
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13[ARM] dma: correct dma_supported() implementationRussell King1-1/+3
dma_supported() is supposed to indicate whether the system can support the DMA mask it was passed, which depends on the maximal address which can be returned for DMA allocations. If the mask is smaller than that, we are unable to guarantee that the driver can reliably obtain suitable memory. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-06[ARM] 5340/1: fix stack placement after noexecstack changesLennert Buytenhek1-1/+1
Commit 8ec53663d2698076468b3e1edc4e1b418bd54de3 ("[ARM] Improve non-executable support") added support for detecting non-executable stack binaries. One of the things it does is to make READ_IMPLIES_EXEC be set in ->personality if we are running on a CPU that doesn't support the XN ("Execute Never") page table bit or if we are running a binary that needs an executable stack. This exposed a latent bug in ARM's asm/processor.h due to which we'll end up placing the stack at a very low address, where it will bump into the heap on any application that uses significant amount of stack or heap or both, causing many interesting crashes. Fix this by testing the ADDR_LIMIT_32BIT bit in ->personality instead of testing for equality against PER_LINUX_32BIT. Reviewed-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-04[ARM] 5339/1: fix __fls() on ARMNicolas Pitre1-6/+10
Commit 0c65f459ce6c intended to fix truncation issues with fls() on ARMv5+ by renaming it to __fls() and wrapping it into a C function. However that didn't take into account the fact that __fls() already already had different semantics in the kernel. Let's move the __fls() code into fls() function directly, and redefine __fls() with the appropriate semantics. While at it, bring a generic __fls() definition for pre ARMv5 too. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-01Merge branch 'for-rmk-realview' of git://linux-arm.org/linux-2.6 into develRussell King1-3/+3
2008-12-01RealView: Use only the shadow mapping of ARM11MPCore local timersCatalin Marinas1-3/+3
All the cases where the local timer for a CPU is accessed happen on the corresponding current CPU, hence no need to access the per-CPU local timer mappings. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-11-30[ARM] Add a common typesafe __io implementationRussell King1-0/+8
As Al did for Versatile in 2ad4f86b60b649fd7428265c08d73a3bd360c81b, add a typesafe __io implementation for platforms to use. Convert platforms to use this new simple typesafe implementation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29[ARM] give RiscPC a NR_IRQS definition and remove defaultRussell King1-4/+0
RiscPC is the only platform using the default setting for NR_IRQS, so the default NR_IRQS doesn't really make sense; remove it and make RiscPC provide such a definition. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29[ARM] Remove linux/sched.h from asm/cacheflush.h and asm/uaccess.hRussell King3-2/+3
... and fix those drivers that were incorrectly relying upon that include. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29[ARM] Rename ISA mach/dma.h header to mach/isa-dma.hRussell King1-1/+1
This avoids confusion with platform specific DMA implementations in mach/dma.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29[ARM] Hide ISA DMA API when ISA_DMA_API is unsetRussell King1-7/+16
When ISA_DMA_API is unset, we're not implementing the ISA DMA API, so there's no point in publishing the prototypes via asm/dma.h, nor including the machine dependent parts of that API. This allows us to remove a lot of mach/dma.h files which don't contain any useful code. Unfortunately though, some platforms put their own private non-ISA definitions into mach/dma.h, so we leave these behind and fix the appropriate #include statments. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29[ARM] move MAX_DMA_ADDRESS to mach/memory.hRussell King1-0/+1
Move the definition of MAX_DMA_ADDRESS from mach/dma.h to mach/memory.h, thereby placing it along side its relative, ISA_DMA_THRESHOLD. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28[ARM] asm/system.h does not require asm/memory.hRussell King1-2/+0
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28Merge branch 'highmem' into develRussell King3-16/+27
Conflicts: arch/arm/mach-clps7500/include/mach/memory.h
2008-11-28[ARM] remove a common set of __virt_to_bus definitionsNicolas Pitre1-0/+5
Let's provide an overridable default instead of having every machine class define __virt_to_bus and __bus_to_virt to the same thing. What most platforms are using is bus_addr == phys_addr so such is the default. One exception is ebsa110 which has no DMA what so ever, so the actual definition is not important except only for proper compilation. Also added a comment about the special footbridge bus translation. Let's also remove comments alluding to set_dma_addr which is not (and should not) be commonly used. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28[ARM] unconditionally define __virt_to_phys and __phys_to_virtNicolas Pitre1-2/+0
There is no machine class overriding this. If non linear translations are implemented again for some machines then this could be restored at that time. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28[ARM] rationalize memory configuration code some moreNicolas Pitre1-2/+4
Currently there are two instances of struct meminfo: one in kernel/setup.c marked __initdata, and another in mm/init.c with permanent storage. Let's keep only the later to directly populate the permanent version from arm_add_memory(). Also move common validation tests between the MMU and non-MMU cases into arm_add_memory() to remove some duplication. Protection against overflowing the membank array is also moved in there in order to cover the kernel cmdline parsing path as well. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27[ARM] clearpage: provide our own clear_user_highpage()Russell King1-5/+6
For similar reasons as copy_user_page(), we want to avoid the additional kmap_atomic if it's unnecessary. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27[ARM] copypage: provide our own copy_user_highpage()Russell King1-9/+14
We used to override the copy_user_page() function. However, this is not only inefficient, it also causes additional complexity for highmem support, since we convert from a struct page to a kernel direct mapped address and back to a struct page again. Moreover, with highmem support, we end up pointlessly setting up kmap entries for pages which we're going to remap. So, push the kmapping down into the copypage implementation files where it's required. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6 into develRussell King2-10/+27
2008-11-27Merge branch 'clps7500' into develRussell King1-41/+0
Conflicts: arch/arm/Kconfig
2008-11-27Merge branches 'core' and 'clks' into develRussell King1-0/+30
2008-11-27[ARM] clkdev: add generic clkdev infrastructureRussell King1-0/+30
Add some generic infrastructure to assist looking up struct clks for the ARM architecture. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27[ARM] clps7500: remove supportRussell King1-41/+0
The CLPS7500 platform has not built since 2.6.22-git7 and there seems to be no interest in fixing it. So, remove the platform support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27[ARM] remove memzero()Russell King4-12/+3
As suggested by Andrew Morton, remove memzero() - it's not supported on other architectures so use of it is a potential build breaking bug. Since the compiler optimizes memset(x,0,n) to __memzero() perfectly well, we don't miss out on the underlying benefits of memzero(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-13Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2-8/+18
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] cdb89712: avoid namespace clashes with SRAM_ and BOOTROM_ constants [ARM] cdb89712,clps7500,h720x: avoid namespace clash for FLASH_* constants [ARM] integrator,realview,versatile: remove FLASH_* and EPROM_* constants [ARM] dma-mapping: fix compiler warning [ARM] iop: iop3xx needs registers mapped uncached+unbuffered [ARM] versatile: correct MMC clock rate [ARM] realview: correct MMC clock rate [ARM] 5329/1: Feroceon: fix feroceon_l2_inv_range
2008-11-13[ARM] dma-mapping: fix compiler warningRussell King1-2/+11
arch/arm/mm/dma-mapping.c: In function `dma_sync_sg_for_cpu': arch/arm/mm/dma-mapping.c:588: warning: statement with no effect Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-11iop-adma: use iop_paranoia() for debug BUG_ONsDan Williams2-2/+9
Now that the critical read back to flush the next descriptor address is fixed we can downgrade some BUG_ONs that need only be enabled when testing changes to the driver. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-11-09[ARM] iop: iop3xx needs registers mapped uncached+unbufferedRussell King1-6/+7
Mikael Pettersson reported: The 2.6.28-rc kernels fail to detect PCI device 0000:00:01.0 (the first ethernet port) on my Thecus n2100 XScale box. There is however still a strange "ghost" device that gets partially detected in 2.6.28-rc2 vanilla. The IOP321 manual says: The user designates the memory region containing the OCCDR as non-cacheable and non-bufferable from the IntelR XScaleTM core. This guarantees that all load/stores to the OCCDR are only of DWORD quantities. Ensure that the OCCDR is so mapped. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-06[ARM] mm: fix page table initializationRussell King1-0/+4
As a result of the ptebits changes, we ended up marking device mappings as normal memory on ARMv7 CPUs, resulting in undesirable behaviour with serial ports and the like. While reviewing the section mapping table entries, other errors in the memory type settings for devices were detected and confirmed to prevent Xscale3 platforms booting. Tested on: OMAP34xx (ARMv7), OMAP24xx (ARMv6), OMAP16xx (ARM926T, ARMv5), PXA311 (Xscale3), PXA272 (Xscale), PXA255 (Xscale), IXP42x (Xscale), S3C2410 (ARM920T, ARMv4T), ARM720T (ARMv4T) StrongARM-110 (ARMv4) Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Mike Rapoport <mike@compulab.co.il> Tested-by: Ben Dooks <ben-linux@fluff.org> Tested-by: Anders Grafström <grfstrm@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-06[ARM] fix naming of MODULE_START / MODULE_ENDRussell King1-6/+6
As of 73bdf0a60e607f4b8ecc5aec597105976565a84f, the kernel needs to know where modules are located in the virtual address space. On ARM, we located this region between MODULE_START and MODULE_END. Unfortunately, everyone else calls it MODULES_VADDR and MODULES_END. Update ARM to use the same naming, so is_vmalloc_or_module_addr() can work properly. Also update the comment on mm/vmalloc.c to reflect that ARM also places modules in a separate region from the vmalloc space. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-06Do not flush the cache in flush_cache_v(un)map for VIPT cachesCatalin Marinas1-10/+26
In case of non-aliasing VIPT caches, there is no need to flush the whole cache when new mapping is created. The patch introduces this condition check. In the non-aliasing VIPT case flush_cache_vmap() needs a DSB since the set_pte_at() function called from vmap_pte_range() does not have such barrier (done usually via TLB flushing functions). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-11-06Add HWCAP_NEON to the ARM hwcap.h fileCatalin Marinas1-0/+1
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-10-27Merge commit 'v2.6.28-rc2' into tracing/urgentIngo Molnar1-3/+3
2008-10-23[ARM] 5320/1: fix assembly constraints in implementation of do_div()Nicolas Pitre1-3/+3
Those inline assembly segments using the umlal instruction must have the & modifier so to be sure that a purely input register won't alias one of the registers used as input+output. In most cases, the inputs are still used after the outputs are touched, and most binutil versions insist on "rdhi, rdlo and rm must all be different" even for ARMv6+. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-20ftrace: rename FTRACE to FUNCTION_TRACERSteven Rostedt1-1/+1
Due to confusion between the ftrace infrastructure and the gcc profiling tracer "ftrace", this patch renames the config options from FTRACE to FUNCTION_TRACER. The other two names that are offspring from FTRACE DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same. This patch was generated mostly by script, and partially by hand. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16[PATCH] remove unused ibcs2/PER_SVR4 in SET_PERSONALITYMartin Schwidefsky1-1/+1
The SET_PERSONALITY macro is always called with a second argument of 0. Remove the ibcs argument and the various tests to set the PER_SVR4 personality. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-13Merge branch 'master' of ↵David Woodhouse27-603/+545
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: include/asm-x86/statfs.h
2008-10-11Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds24-522/+536
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits) [ARM] 5300/1: fixup spitz reset during boot [ARM] 5295/1: make ZONE_DMA optional [ARM] 5239/1: Palm Zire 72 power management support [ARM] 5298/1: Drop desc_handle_irq() [ARM] 5297/1: [KS8695] Fix two compile-time warnings [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores. [ARM] pxa: allow multi-machine PCMCIA builds [ARM] pxa: add preliminary CPUFREQ support for PXA3xx [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c [ARM] pxa/zylonite: add support for USB OHCI [ARM] ohci-pxa27x: use ioremap() and offset for register access [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph() [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c [ARM] pxa: simplify DMA register definitions [ARM] pxa: make additional DCSR bits valid for PXA3xx [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c ... Fixed up conflicts in arch/arm/mach-versatile/core.c sound/soc/pxa/pxa2xx-ac97.c sound/soc/pxa/pxa2xx-i2s.c manually.
2008-10-09Merge branch 'for-rmk' of git://source.mvista.com/git/linux-davinci-2.6.gitRussell King1-1/+1
Merge branch 'davinci' into devel
2008-10-09Merge branch 'pxa-all' into develRussell King1-2/+1
Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/corgi.c arch/arm/mach-pxa/include/mach/hardware.h arch/arm/mach-pxa/spitz.c
2008-10-09Merge branch 'at91' into develRussell King1-11/+14
2008-10-09Merge branch 'ptebits' into develRussell King6-87/+105
Conflicts: arch/arm/Kconfig
2008-10-09[ARM] 5295/1: make ZONE_DMA optionalNicolas Pitre1-0/+2
Most ARM machines don't need a special "DMA" memory zone, and when configured out, the kernel becomes a bit smaller: | text data bss dec hex filename |3826182 102384 111700 4040266 3da64a vmlinux |3823593 101616 111700 4036909 3d992d vmlinux.nodmazone This is because the system now has only one zone total which effect is to optimize away many conditionals in page allocation paths. So let's configure this zone only on machines that need split zones. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07Merge branches 'pxa-core' and 'pxa-machines' into pxa-allRussell King2-8/+11
Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/pxa25x.c arch/arm/mach-pxa/pxa27x.c
2008-10-01[ARM] mm: enable sparsemem on clps7500 and RiscPCRussell King1-3/+17
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01[ARM] mm: provide helpers for accessing membanksRussell King1-0/+11
Provide helpers for getting physical addresses or pfns from the meminfo array, and use them. Move for_each_nodebank() to asm/setup.h alongside the meminfo structure definition. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 21:26:06 +0000