summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-01-20net: splice: avoid high order page splittingEric Dumazet1-29/+9
splice() can handle pages of any order, but network code tries hard to split them in PAGE_SIZE units. Not quite successfully anyway, as __splice_segment() assumed poff < PAGE_SIZE. This is true for the skb->data part, not necessarily for the fragments. This patch removes this logic to give the pages as they are in the skb. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-20tcp: fix incorrect LOCKDROPPEDICMPS counterEric Dumazet1-5/+4
commit 563d34d057 (tcp: dont drop MTU reduction indications) added an error leading to incorrect accounting of LINUX_MIB_LOCKDROPPEDICMPS If socket is owned by the user, we want to increment this SNMP counter, unless the message is a (ICMP_DEST_UNREACH,ICMP_FRAG_NEEDED) one. Reported-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-19net/hyperv: fix wrong length of mac addressJianjun Kong2-2/+2
This patch fixed wrong mac length, it should be ETH_ALEN, also replaced the hardcode 6 in hyperv_net.h Signed-off-by: Amos Kong <kongjianjun@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-19net: qmi_wwan: add ONDA MT8205 4G LTEBjørn Mork1-0/+1
The driver description files gives these names to the vendor specific functions on this modem: Diag VID_19D2&PID_0265&MI_00 NMEA VID_19D2&PID_0265&MI_01 AT cmd VID_19D2&PID_0265&MI_02 Modem VID_19D2&PID_0265&MI_03 Net VID_19D2&PID_0265&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18net/mlx4_core: Set number of msix vectors under SRIOV mode to firmware defaultsOr Gerlitz1-9/+2
The lines if (mlx4_is_mfunc(dev)) { nreq = 2; } else { which hard code the number of requested msi-x vectors under multi-function mode to two can be removed completely, since the firmware sets num_eqs and reserved_eqs appropriately Thus, the code line: nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs, nreq); is by itself sufficient and correct for all cases. Currently, for mfunc mode num_eqs = 32 and reserved_eqs = 28, hence four vectors will be enabled. This triples (one vector is used for the async events and commands EQ) the horse power provided for processing of incoming packets on netdev RSS scheme, IO initiators/targets commands processing flows, etc. Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18net/mlx4_en: Fix bridged vSwitch configuration for non SRIOV modeYan Burman1-4/+9
Commit 5b4c4d36860e "mlx4_en: Allow communication between functions on same host" introduced a regression under which a bridge acting as vSwitch whose uplink is an mlx4 Ethernet device become non-operative in native (non sriov) mode. This happens since broadcast ARP requests sent by VMs were loopback-ed by the HW and hence the bridge learned VM source MACs on both the VM and the uplink ports. The fix is to place the DMAC in the send WQE only under SRIOV/eSwitch configuration or when the device is in selftest. Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Yan Burman <yanb@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18ipv6: Add an error handler for icmp6Steffen Klassert1-0/+12
pmtu and redirect events are now handled in the protocols error handler, so add an error handler for icmp6 to do this. It is needed in the case when we have no socket context. Based on a patch by Duan Jiong. Reported-by: Duan Jiong <djduanjiong@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18net: calxedaxgmac: throw away overrun framesRob Herring1-0/+4
The xgmac driver assumes 1 frame per descriptor. If a frame larger than the descriptor's buffer size is received, the frame will spill over into the next descriptor. So check for received frames that span more than one descriptor and discard them. This prevents a crash if we receive erroneous large packets. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-17sctp: refactor sctp_outq_teardown to insure proper re-initalizationNeil Horman1-4/+8
Jamie Parsons reported a problem recently, in which the re-initalization of an association (The duplicate init case), resulted in a loss of receive window space. He tracked down the root cause to sctp_outq_teardown, which discarded all the data on an outq during a re-initalization of the corresponding association, but never reset the outq->outstanding_data field to zero. I wrote, and he tested this fix, which does a proper full re-initalization of the outq, fixing this problem, and hopefully future proofing us from simmilar issues down the road. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Jamie Parsons <Jamie.Parsons@metaswitch.com> Tested-by: Jamie Parsons <Jamie.Parsons@metaswitch.com> CC: Jamie Parsons <Jamie.Parsons@metaswitch.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-17macvlan: fix macvlan_get_size()Eric Dumazet1-1/+4
commit df8ef8f3aaa (macvlan: add FDB bridge ops and macvlan flags) forgot to update macvlan_get_size() after the addition of IFLA_MACVLAN_FLAGS Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-17phy/marvell: remove fiber/copper autoselect on 88e1111Stef van Os1-9/+0
Remove the code that always enables copper/fiber autoselect, ignoring the DIS_FC strapping pin. The default value for this register is autoselect on anyway, and if you explicitly disable autoselect via strapping you probably really don't want autoselect. Signed-off-by: Stef van Os <stef.van.os@prodrive.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-173c574_cs: fix operator precedence between << and &Nickolai Zeldovich1-1/+1
The code to print the FIFO size in tc574_config computes it as: 8 << config & Ram_size which evaluates the '<<' first, but the actual intent is to evaluate the '&' first. Add parentheses to enforce desired evaluation order. Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-17Merge branch 'wireless'David S. Miller17-88/+73
John W. Linville says: ==================== This batch of fixes is intended for 3.8... Included is a Bluetooth pull. Gustavo says: "A few fixes for 3.8. Five of them are just new devices ids addition. Apart from the that there is fix to a kernel memory leak to userspace from Anderson Lizardo, two interoperability fixes from Jaganath Kanakkassery and Szymon Janc. And a crash fix by me." Along with that, Amitkumar Karwar brings a pair of mwifiex fixes for problems related to handling of band information within the driver. These problems can lead to association failures. Sujith Manoharan fixes a memory leak in the ath9k_htc code (originally reported by Larry Finger). The big hero this round is Felix Fietkau. Felix gives us seven ath9k fixes, including a fix for a race condition, the removal of a double-free, and a fix for a deadlock, among others. These have all been in linux-next for at least a couple of days, with no complaints so far. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-17Merge branch 'master' of ↵John W. Linville17-88/+73
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-01-17ipv4: Don't update the pmtu on mtu locked routesSteffen Klassert1-0/+3
Routes with locked mtu should not use learned pmtu informations, so do not update the pmtu on these routes. Reported-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-17ipv4: Remove output route check in ipv4_mtuSteffen Klassert1-1/+1
The output route check was introduced with git commit 261663b0 (ipv4: Don't use the cached pmtu informations for input routes) during times when we cached the pmtu informations on the inetpeer. Now the pmtu informations are back in the routes, so this check is obsolete. It also had some unwanted side effects, as reported by Timo Teras and Lukas Tribus. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-17ipv6: fix header length calculation in ip6_append_data()Romain KUNTZ1-2/+2
Commit 299b0767 (ipv6: Fix IPsec slowpath fragmentation problem) has introduced a error in the header length calculation that provokes corrupted packets when non-fragmentable extensions headers (Destination Option or Routing Header Type 2) are used. rt->rt6i_nfheader_len is the length of the non-fragmentable extension header, and it should be substracted to rt->dst.header_len, and not to exthdrlen, as it was done before commit 299b0767. This patch reverts to the original and correct behavior. It has been successfully tested with and without IPsec on packets that include non-fragmentable extensions headers. Signed-off-by: Romain Kuntz <r.kuntz@ipflavors.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16net: qmi_wwan: add TP-LINK HSUPA Modem MA180Bjørn Mork1-0/+1
The driver description files gives these names to the vendor specific functions on this modem: Diagnostics VID_2357&PID_0201&MI_00 NMEA VID_2357&PID_0201&MI_01 Modem VID_2357&PID_0201&MI_03 Networkcard VID_2357&PID_0201&MI_04 The "Networkcard" function has been verified to support these QMI services: ctl (1.3) wds (1.3) dms (1.2) nas (1.0) Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16usbnet: dm9601: Fix incorrect commandTushar Behera1-16/+6
commit 24b1042c4eb2 ("usbnet: dm9601: apply introduced usb command APIs") removes the distiction between DM_WRITE_REG and DM_WRITE_REGS command. The distiction is reintroduced to the driver so that the functionality of the driver remains same. CC: Ming Lei <ming.lei@canonical.com> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16cxgb4: set coalesce parameters on all queuesThadeu Lima de Souza Cascardo1-3/+14
The coalesce parameters was set only on the first queue, which caused interrupt rates to be larger on all the other queues. This patch allows interrupt rates to be reduced for certain workloads and colaesce parameters by 41%. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: steved@us.ibm.com Cc: toml@us.ibm.com Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16MAINTAINERS: Stephen Hemminger email changeStephen Hemminger1-3/+3
I changed my email because the vyatta.com mail server is now redirected to brocade.com; and the Brocade mail system is not friendly to Linux desktop users. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16ixgbe: Fix overwriting of rx_mtrl in ixgbe_ptp_hwtstamp_ioctlJacob Keller1-2/+2
This patch corrects a bug introduced by commit f3444d8b. The rxmtrl value for the UDP port to timestamp on was moved above the switch statement, but was overwritten to 0 if the ioctl selected one of the V1 filters. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-16ixgbe: only compile ixgbe_debugfs.o when enabledJacob Keller2-6/+2
This patch modifies ixgbe_debugfs.c and the Makefile for the ixgbe driver to only compile the file when the config is enabled. This means we can remove the #ifdef inside the ixgbe_debugfs.c file. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-14tg3: Fix crc errors on jumbo frame receiveNithin Nayak Sujir1-23/+35
TG3_PHY_AUXCTL_SMDSP_ENABLE/DISABLE macros do a blind write to the phy auxiliary control register and overwrite the EXT_PKT_LEN (bit 14) resulting in intermittent crc errors on jumbo frames with some link partners. Change the code to do a read/modify/write. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14tg3: Avoid null pointer dereference in tg3_interrupt in netconsole modeNithin Nayak Sujir1-0/+4
When netconsole is enabled, logging messages generated during tg3_open can result in a null pointer dereference for the uninitialized tg3 status block. Use the irq_sync flag to disable polling in the early stages. irq_sync is cleared when the driver is enabling interrupts after all initialization is completed. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14Merge branch 'master' of git://1984.lsi.us.es/nfDavid S. Miller5-14/+30
Pablo Neira Ayuso says: ==================== The following patchset contains netfilter fixes for 3.8-rc3, they are: * fix possible BUG_ON if several netns are in use and the nf_conntrack module is removed, initial patch from Gao feng, final patch from myself. * fix unset return value if conntrack zone are disabled at compile-time, reported by Borislav Petkov, fix from myself. * fix display error message via dmesg for arp_tables, from Jan Engelhardt. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14tun: fix LSM/SELinux labeling of tun/tap devicesPaul Moore6-37/+151
This patch corrects some problems with LSM/SELinux that were introduced with the multiqueue patchset. The problem stems from the fact that the multiqueue work changed the relationship between the tun device and its associated socket; before the socket persisted for the life of the device, however after the multiqueue changes the socket only persisted for the life of the userspace connection (fd open). For non-persistent devices this is not an issue, but for persistent devices this can cause the tun device to lose its SELinux label. We correct this problem by adding an opaque LSM security blob to the tun device struct which allows us to have the LSM security state, e.g. SELinux labeling information, persist for the lifetime of the tun device. In the process we tweak the LSM hooks to work with this new approach to TUN device/socket labeling and introduce a new LSM hook, security_tun_dev_attach_queue(), to approve requests to attach to a TUN queue via TUNSETQUEUE. The SELinux code has been adjusted to match the new LSM hooks, the other LSMs do not make use of the LSM TUN controls. This patch makes use of the recently added "tun_socket:attach_queue" permission to restrict access to the TUNSETQUEUE operation. On older SELinux policies which do not define the "tun_socket:attach_queue" permission the access control decision for TUNSETQUEUE will be handled according to the SELinux policy's unknown permission setting. Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Eric Paris <eparis@parisplace.org> Tested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14selinux: add the "attach_queue" permission to the "tun_socket" classPaul Moore1-1/+1
Add a new permission to align with the new TUN multiqueue support, "tun_socket:attach_queue". The corresponding SELinux reference policy patch is show below: diff --git a/policy/flask/access_vectors b/policy/flask/access_vectors index 28802c5..a0664a1 100644 --- a/policy/flask/access_vectors +++ b/policy/flask/access_vectors @@ -827,6 +827,9 @@ class kernel_service class tun_socket inherits socket +{ + attach_queue +} class x_pointer inherits x_device Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Eric Paris <eparis@parisplace.org> Tested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14tcp: fix a panic on UP machines in reqsk_fastopen_removeEric Dumazet1-2/+0
spin_is_locked() on a non !SMP build is kind of useless. BUG_ON(!spin_is_locked(xx)) is guaranteed to crash. Just remove this check in reqsk_fastopen_remove() as the callers do hold the socket lock. Reported-by: Ketan Kulkarni <ketkulka@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jerry Chu <hkchu@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Dave Taht <dave.taht@gmail.com> Acked-by: H.K. Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14Merge tag 'dt-fixes-for-3.8' of git://sources.calxeda.com/kernel/linuxLinus Torvalds2-0/+2
Pull devicetree fixes from Rob Herring: "Two fixes to prevent unconditional re-compile of dts files on arm and arm64." * tag 'dt-fixes-for-3.8' of git://sources.calxeda.com/kernel/linux: ARM: dts: prevent *.dtb from always being rebuilt arm64: dts: prevent *.dtb from always being rebuilt
2013-01-14vfs: add missing virtual cache flush after editing partial pagesLinus Torvalds1-0/+1
Andrew Morton pointed this out a month ago, and then I completely forgot about it. If we read a partial last page of a block device, we will zero out the end of the page, but since that page can then be mapped into user space, we should also make sure to flush the cache on architectures that have virtual caches. We have the flush_dcache_page() function for this, so use it. Now, in practice this really never matters, because nobody sane uses virtual caches to begin with, and they largely exist on old broken RISC arhitectures. And even if you did run on one of those obsolete CPU's, the whole "mmap and access the last partial page of a block device" behavior probably doesn't actually exist. The normal IO functions (read/write) will never see the zeroed-out part of the page that migth not be coherent in the cache, because they honor the size of the device. So I'm marking this for stable (3.7 only), but I'm not sure anybody will ever care. Pointed-out-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org # 3.7 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-14ath9k: disable the tasklet before taking the PCU lockFelix Fietkau1-4/+3
Fixes a reported CPU soft lockup where the tasklet tries to acquire the lock and blocks while ath_prepare_reset (holding the lock) waits for it to complete. Cc: stable@vger.kernel.org Reported-by: Robert Shade <robert.shade@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-14ath9k: remove sc->rx.rxbuflock to fix a deadlockFelix Fietkau2-14/+0
The commit "ath9k: fix rx flush handling" added a deadlock that happens because ath_rx_tasklet is called in a section that has already taken the rx buffer lock. It seems that the only purpose of the rxbuflock was a band-aid fix to the reset vs rx tasklet race, which has been properly fixed in the commit "ath9k: add a better fix for the rx tasklet vs rx flush race". Now that the fix is in, we can safely remove the lock to avoid such issues. Cc: stable@vger.kernel.org Reported-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-14Merge tag 'sound-3.8' of ↵Linus Torvalds25-153/+255
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Most of commits found here are for ASoC device specific fixes, arizona, cs4271, wm5102, wm2200, etc, in addition to a couple of memory leak fixes in ASoC core. Other than that, regression fixes in HD-audio and USB-audio, and a fix for new Realtek codecs." * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits) ALSA: usb-audio: Fix NULL dereference by access to non-existing substream ALSA: hda - Add support of new codec ALC284 ALSA: usb-audio: Make ebox44_table static ALSA: hdspm - Fix wordclock status on AES32 Revert "ALSA: hda - Shut up pins at power-saving mode with Conexnat codecs" ALSA: hda - Disable runtime D3 for Intel CPT & co ALSA: pxa27x: fix ac97 warm reset ALSA: pxa27x: fix ac97 cold reset ASoC: wm_adsp: Ensure that block writes are from DMA aligned addresses ASoC: wm2000: Fix sense of speech clarity enable ASoC: wm5100: Remove DSP B and left justified formats ASoC: arizona: Remove DSP B and left justified AIF modes ASoC: wm2200: Remove DSP B and left justified AIF modes ASoC: wm5102: Improve speaker enable performance ASoC: core: fix the memory leak in case of remove_aux_dev() ASoC: core: fix the memory leak in case of device_add() failure ASoC: cs42l52: Catch no-match case in cs42l52_get_clk ASoC: lm49453: Update lm49453_reg_defs values as per LM49453 HW revision-B ASoC: lm49453: Fix adc, mic and sidetone volume ranges ASoC: arizona: Correct FLL source definitions ...
2013-01-14Merge tag 'staging-3.8-rc3' of ↵Linus Torvalds51-983/+1390
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg Kroah-Hartman: "Here are a number of small fixes to staging drivers for your 3.8-rc3 tree. Well, the omapdrm fixes aren't really "small" but they were waiting on a number of other drm patches to go in through the drm tree, and got delayed by my vacation over the holidays. They are totally self-contained, everyone involved have acked them, and they fix issues that people have been having with the driver. Other than that one, it's a bunch of tiny bugfixes for a number of reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'staging-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (36 commits) staging: zram: fix invalid memory references during disk write staging: tidspbridge: use prepare/unprepare on dsp clocks staging: tidspbridge: Fix build breakage due to splitting CM functions. staging: comedi: comedi_test: fix race when cancelling command staging: comedi: Kconfig: COMEDI_NI_AT_A2150 should select COMEDI_FC staging: comedi: prevent auto-unconfig of manually configured devices staging: comedi: fix minimum AO period for NI 625x and NI 628x staging: vme_pio2: fix oops on module unloading staging: speakup: avoid out-of-range access in synth_add() staging: speakup: avoid out-of-range access in synth_init() staging: rtl8192e: Fix failure to check pci_map_single() staging: rtl8187se: Fix failure to check pci_map_single() staging: drm/imx: fix double free bug in error path staging: drm/imx: several bug fixes staging: drm/imx: check return value of ipu_reset() staging: drm/omap: fix flags in dma buf exporting staging: drm/omap: use omapdss low level API staging/fwserial: Update TODO file per reviewer comments staging/fwserial: Limit tx/rx to 1394-2008 spec maximum staging/fwserial: Refine Kconfig help text ...
2013-01-14Merge tag 'usb-3.8-rc3' of ↵Linus Torvalds32-89/+257
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a bunch of USB fixes for your 3.8-rc3 tree. They all either fix problems that have been reported (like the xhci/hub changes) or add new device ids to existing drivers. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits) usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid added usb: host: ohci-tmio: fix compile warning USB: Add device quirk for Microsoft VX700 webcam USB: ehci-fsl: fix regression on mpc5121e usb: chipidea: Allow disabling streaming not only in udc mode USB: fsl-mph-dr-of: fix regression on mpc5121e USB: select USB_ARCH_HAS_EHCI for MXS USB: hub: handle claim of enabled remote wakeup after reset USB: cdc-acm: Add support for "PSC Scanning, Magellan 800i" USB: option: add Nexpring NP10T terminal id USB: option: add Telekom Speedstick LTE II USB: option: blacklist network interface on ZTE MF880 usb: imx21-hcd: Include missing linux/module.h USB: option: Add new MEDIATEK PID support USB: ehci: make debug port in-use detection functional again USB: usbtest: fix test number in log message xhci: Avoid "dead ports", add roothub port polling. USB: Handle warm reset failure on empty port. USB: Ignore port state until reset completes. USB: Increase reset timeout. ...
2013-01-14Merge tag 'driver-core-3.8-rc3' of ↵Linus Torvalds2-21/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg Kroah-Hartman: "Here are two patches for 3.8-rc3. One removes the __dev* defines from init.h now that all usages of it are gone from your tree. The other fix is for debugfs's paramater that was using the wrong base for the option. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: debugfs: convert gid= argument from decimal, not octal Remove __dev* markings from init.h
2013-01-14Merge tag 'char-misc-3.8-rc3' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg Kroah-Hartman: "Here is a single fix for the mei driver that resolves a reported issue. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'char-misc-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: fix mismatch in mutex unlock-lock in mei_amthif_read()
2013-01-14Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds21-63/+149
Pull drm fixes from Dave Airlie: "Nothing too astounding - nouveau: bunch of regression fixes and oops fixes - radeon: UMS fixes, rn50 fix, dma fix - udl: fix EDID retrieval for large EDIDs." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: udldrmfb: udl_get_edid: drop unneeded i-- udldrmfb: udl_get_edid: usb_control_msg buffer must not be on the stack udldrmfb: Fix EDID not working with monitors with EDID extension blocks drm/nvc0/fb: fix crash when different mutex is used to protect same list drm/nouveau/clock: fix support for more than 2 monitors on nve0 drm/nv50/disp: fix selection of bios script for analog outputs drm/nv17-50: restore fence buffer on resume drm/nouveau: fix blank LVDS screen regression on pre-nv50 cards drm/nouveau: fix nouveau_client allocation failure path drm/nouveau: don't return freed object from nouveau_handle_create drm/nouveau/vm: fix memory corruption when pgt allocation fails drm/nouveau: add locking around instobj list operations drm/nouveau: do not forcibly power on lvds panels drm/nouveau/devinit: ensure legacy vga control is enabled during post radeon/kms: fix dma relocation checking radeon/kms: force rn50 chip to always report connected on analog output drm/radeon: fix error path in kpage allocation drm/radeon: fix a bogus kfree drm/radeon: fix NULL pointer dereference in UMS mode
2013-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds56-199/+6654
Pull networking fixes from David Miller: 1) Fix regression allowing IP_TTL setting of zero, fix from Cong Wang. 2) Fix leak regressions in tunap, from Jason Wang. 3) be2net driver always returns IRQ_HANDLED in INTx handler, fix from Sathya Perla. 4) qlge doesn't really support NETIF_F_TSO6, don't set that flag. Fix from Amerigo Wang. 5) Add 802.11ad Atheros wil6210 driver, from Vladimir Kondratiev. 6) Fix MTU calculations in mac80211 layer, from T Krishna Chaitanya. 7) Station info layer of mac80211 needs to use del_timer_sync(), from Johannes Berg. 8) tcp_read_sock() can loop forever, because we don't immediately stop when recv_actor() returns zero. Fix from Eric Dumazet. 9) Fix WARN_ON() in tcp_cleanup_rbuf(). We have to use sk_eat_skb() in tcp_recv_skb() to handle the case where a large GRO packet is split up while it is use by a splice() operation. Fix also from Eric Dumazet. 10) addrconf_get_prefix_route() in ipv6 tests flags incorrectly, it does: if (X && (p->flags & Y) != 0) when it really meant to go: if (X && (p->flags & X) != 0) fix from Romain Kuntz. 11) Fix lost Kconfig dependency for bfin_mac driver hardware timestamping. From Lars-Peter Clausen. 12) Fix regression in handling of RST without ACK in TCP, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (37 commits) be2net: fix unconditionally returning IRQ_HANDLED in INTx tuntap: fix leaking reference count tuntap: forbid calling TUNSETIFF when detached tuntap: switch to use rtnl_dereference() net, wireless: overwrite default_ethtool_ops qlge: remove NETIF_F_TSO6 flag tcp: accept RST without ACK flag net: ethernet: xilinx: Do not use NO_IRQ in axienet net: ethernet: xilinx: Do not use axienet on PPC bnx2x: Allow management traffic after boot from SAN bnx2x: Fix fastpath structures when memory allocation fails bfin_mac: Restore hardware time-stamping dependency on BF518 tun: avoid owner checks on IFF_ATTACH_QUEUE bnx2x: move debugging code before the return tuntap: refuse to re-attach to different tun_struct ipv6: use addrconf_get_prefix_route for prefix route lookup [v2] ipv6: fix the noflags test in addrconf_get_prefix_route tcp: fix splice() and tcp collapsing interaction tcp: splice: fix an infinite loop in tcp_read_sock() net: prevent setting ttl=0 via IP_TTL ...
2013-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds7-12/+20
Pull sparc updates from David Miller: 1) Add finit_module syscall entry. 2) Remove stray __dev{init,exit} references, from Sam Ravnborg. Fix up conflicts in the sparc PCI code due to whitespace differences in the __dev{init,exit} removal (which also came in through Greg). * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: remove __devinit, __devexit annotations sparc: Hook up finit_module syscall.
2013-01-14ARM: dts: prevent *.dtb from always being rebuiltStephen Warren1-0/+1
if_changed (used by the *.dts->*.dtc rule) rebuilds files if they aren't contained in $(targets). (make V=2 indicates this). Add $(dtb-y) to $(targets) to prevent *.dtb from always being rebuilt. This fixes a regression introduced by the .dtb rule rework in 499cd82 "ARM: dt: change .dtb build rules to build in dts directory". Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-01-14arm64: dts: prevent *.dtb from always being rebuiltStephen Warren1-0/+1
if_changed (used by the *.dts->*.dtc rule) rebuilds files if they aren't contained in $(targets). (make V=2 indicates this). Add $(dtb-y) to $(targets) to prevent *.dtb from always being rebuilt. Note This fixes a regression introduced by the .dtb rule rework in da4cbc6 "arm64: use new common dtc rule", although since arm64 doesn't actually have any *.dts yet, this isn't a critical issue. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-01-13staging: zram: fix invalid memory references during disk writeNitin Gupta1-15/+24
Fixes a bug introduced by commit c8f2f0db1 ("zram: Fix handling of incompressible pages") which caused invalid memory references during disk write. Invalid references could occur in two cases: - Incoming data expands on compression: In this case, reference was made to kunmap()'ed bio page. - Partial (non PAGE_SIZE) write with incompressible data: In this case, reference was made to a kfree()'ed buffer. Fixes bug 50081: https://bugzilla.kernel.org/show_bug.cgi?id=50081 Signed-off-by: Nitin Gupta <ngupta@vflare.org> Cc: stable <stable@vger.kernel.org> Reported-by: Mihail Kasadjikov <hamer.mk@gmail.com> Reported-by: Tomas M <tomas@slax.org> Reviewed-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-14udldrmfb: udl_get_edid: drop unneeded i--Hans de Goede1-1/+0
This is a left-over from when udl_get_edid returned the amount of bytes successfully read, which it no longer does. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-01-14udldrmfb: udl_get_edid: usb_control_msg buffer must not be on the stackHans de Goede1-1/+7
The buffer passed to usb_control_msg may end up in scatter-gather list, and may thus not be on the stack. Having it on the stack usually works on x86, but not on other archs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-01-14udldrmfb: Fix EDID not working with monitors with EDID extension blocksHans de Goede1-0/+8
udldrmfb only reads the main EDID block, and if that advertises extensions the drm_edid code expects them to be present, and starts reading beyond the buffer udldrmfb passes it. Although it may be possible to read more EDID info with the udl we simpy don't know how, and even if trial and error gets it working on one device, that is no guarantee it will work on other revisions. So this patch does a simple fix in the form of patching the EDID info to report 0 extension blocks, this fixes udldrmfb only doing 1024x768 on monitors with EDID extension blocks. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-01-14Merge branch 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie3-9/+20
into drm-next Fixes for UMS mode which has been broken for a while plus an rn50 fix and a dma fix. * 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux: radeon/kms: fix dma relocation checking radeon/kms: force rn50 chip to always report connected on analog output drm/radeon: fix error path in kpage allocation drm/radeon: fix a bogus kfree drm/radeon: fix NULL pointer dereference in UMS mode
2013-01-14Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie17-52/+114
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Regression fixes since rework mostly. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nvc0/fb: fix crash when different mutex is used to protect same list drm/nouveau/clock: fix support for more than 2 monitors on nve0 drm/nv50/disp: fix selection of bios script for analog outputs drm/nv17-50: restore fence buffer on resume drm/nouveau: fix blank LVDS screen regression on pre-nv50 cards drm/nouveau: fix nouveau_client allocation failure path drm/nouveau: don't return freed object from nouveau_handle_create drm/nouveau/vm: fix memory corruption when pgt allocation fails drm/nouveau: add locking around instobj list operations drm/nouveau: do not forcibly power on lvds panels drm/nouveau/devinit: ensure legacy vga control is enabled during post
2013-01-13usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid addedTomasz Mloduchowski2-0/+8
Simple fix to add support for Crucible Technologies COMET Caller ID USB decoder - a device containing FTDI USB/Serial converter chip, handling 1200bps CallerID messages decoded from the phone line - adding correct USB PID is sufficient. Tested to apply cleanly and work flawlessly against 3.6.9, 3.7.0-rc8 and 3.8.0-rc3 on both amd64 and x86 arches. Signed-off-by: Tomasz Mloduchowski <q@qdot.me> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 23:22:36 +0000