diff options
Diffstat (limited to 'sound/soc/intel/skylake/bxt-sst.c')
-rw-r--r-- | sound/soc/intel/skylake/bxt-sst.c | 203 |
1 files changed, 153 insertions, 50 deletions
diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 965ce40ce752..2663781278aa 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -37,11 +37,19 @@ #define BXT_ADSP_SRAM1_BASE 0xA0000 +#define BXT_INSTANCE_ID 0 +#define BXT_BASE_FW_MODULE_ID 0 + static unsigned int bxt_get_errorcode(struct sst_dsp *ctx) { return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE); } +/* + * First boot sequence has some extra steps. Core 0 waits for power + * status on core 1, so power up core 1 also momentarily, keep it in + * reset/stall and then turn it off + */ static int sst_bxt_prepare_fw(struct sst_dsp *ctx, const void *fwdata, u32 fwsize) { @@ -49,7 +57,7 @@ static int sst_bxt_prepare_fw(struct sst_dsp *ctx, u32 reg; stream_tag = ctx->dsp_ops.prepare(ctx->dev, 0x40, fwsize, &ctx->dmab); - if (stream_tag < 0) { + if (stream_tag <= 0) { dev_err(ctx->dev, "Failed to prepare DMA FW loading err: %x\n", stream_tag); return stream_tag; @@ -58,17 +66,27 @@ static int sst_bxt_prepare_fw(struct sst_dsp *ctx, ctx->dsp_ops.stream_tag = stream_tag; memcpy(ctx->dmab.area, fwdata, fwsize); - /* Purge FW request */ + /* Step 1: Power up core 0 and core1 */ + ret = skl_dsp_core_power_up(ctx, SKL_DSP_CORE0_MASK | + SKL_DSP_CORE_MASK(1)); + if (ret < 0) { + dev_err(ctx->dev, "dsp core0/1 power up failed\n"); + goto base_fw_load_failed; + } + + /* Step 2: Purge FW request */ sst_dsp_shim_write(ctx, SKL_ADSP_REG_HIPCI, SKL_ADSP_REG_HIPCI_BUSY | - BXT_IPC_PURGE_FW | (stream_tag - 1)); + (BXT_IPC_PURGE_FW | ((stream_tag - 1) << 9))); - ret = skl_dsp_enable_core(ctx); + /* Step 3: Unset core0 reset state & unstall/run core0 */ + ret = skl_dsp_start_core(ctx, SKL_DSP_CORE0_MASK); if (ret < 0) { - dev_err(ctx->dev, "Boot dsp core failed ret: %d\n", ret); + dev_err(ctx->dev, "Start dsp core failed ret: %d\n", ret); ret = -EIO; goto base_fw_load_failed; } + /* Step 4: Wait for DONE Bit */ for (i = BXT_INIT_TIMEOUT; i > 0; --i) { reg = sst_dsp_shim_read(ctx, SKL_ADSP_REG_HIPCIE); @@ -88,10 +106,18 @@ static int sst_bxt_prepare_fw(struct sst_dsp *ctx, SKL_ADSP_REG_HIPCIE_DONE); } - /* enable Interrupt */ + /* Step 5: power down core1 */ + ret = skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1)); + if (ret < 0) { + dev_err(ctx->dev, "dsp core1 power down failed\n"); + goto base_fw_load_failed; + } + + /* Step 6: Enable Interrupt */ skl_ipc_int_enable(ctx); skl_ipc_op_int_enable(ctx); + /* Step 7: Wait for ROM init */ for (i = BXT_INIT_TIMEOUT; i > 0; --i) { if (SKL_FW_INIT == (sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS) & @@ -112,7 +138,8 @@ static int sst_bxt_prepare_fw(struct sst_dsp *ctx, base_fw_load_failed: ctx->dsp_ops.cleanup(ctx->dev, &ctx->dmab, stream_tag); - skl_dsp_disable_core(ctx); + skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1)); + skl_dsp_disable_core(ctx, SKL_DSP_CORE0_MASK); return ret; } @@ -130,23 +157,41 @@ static int sst_transfer_fw_host_dma(struct sst_dsp *ctx) return ret; } +#define BXT_ADSP_FW_BIN_HDR_OFFSET 0x2000 + static int bxt_load_base_firmware(struct sst_dsp *ctx) { - const struct firmware *fw = NULL; + struct firmware stripped_fw; struct skl_sst *skl = ctx->thread_context; int ret; - ret = request_firmware(&fw, ctx->fw_name, ctx->dev); + ret = request_firmware(&ctx->fw, ctx->fw_name, ctx->dev); if (ret < 0) { dev_err(ctx->dev, "Request firmware failed %d\n", ret); goto sst_load_base_firmware_failed; } - ret = sst_bxt_prepare_fw(ctx, fw->data, fw->size); + /* check for extended manifest */ + if (ctx->fw == NULL) + goto sst_load_base_firmware_failed; + + ret = snd_skl_parse_uuids(ctx, BXT_ADSP_FW_BIN_HDR_OFFSET); + if (ret < 0) + goto sst_load_base_firmware_failed; + + stripped_fw.data = ctx->fw->data; + stripped_fw.size = ctx->fw->size; + skl_dsp_strip_extended_manifest(&stripped_fw); + + ret = sst_bxt_prepare_fw(ctx, stripped_fw.data, stripped_fw.size); /* Retry Enabling core and ROM load. Retry seemed to help */ if (ret < 0) { - ret = sst_bxt_prepare_fw(ctx, fw->data, fw->size); + ret = sst_bxt_prepare_fw(ctx, stripped_fw.data, stripped_fw.size); if (ret < 0) { + dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n", + sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE), + sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS)); + dev_err(ctx->dev, "Core En/ROM load fail:%d\n", ret); goto sst_load_base_firmware_failed; } @@ -159,83 +204,135 @@ static int bxt_load_base_firmware(struct sst_dsp *ctx) sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE), sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS)); - skl_dsp_disable_core(ctx); + skl_dsp_disable_core(ctx, SKL_DSP_CORE0_MASK); } else { dev_dbg(ctx->dev, "Firmware download successful\n"); ret = wait_event_timeout(skl->boot_wait, skl->boot_complete, msecs_to_jiffies(SKL_IPC_BOOT_MSECS)); if (ret == 0) { dev_err(ctx->dev, "DSP boot fail, FW Ready timeout\n"); - skl_dsp_disable_core(ctx); + skl_dsp_disable_core(ctx, SKL_DSP_CORE0_MASK); ret = -EIO; } else { - skl_dsp_set_state_locked(ctx, SKL_DSP_RUNNING); ret = 0; + skl->fw_loaded = true; } } sst_load_base_firmware_failed: - release_firmware(fw); + release_firmware(ctx->fw); return ret; } -static int bxt_set_dsp_D0(struct sst_dsp *ctx) +static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id) { struct skl_sst *skl = ctx->thread_context; int ret; + struct skl_ipc_dxstate_info dx; + unsigned int core_mask = SKL_DSP_CORE_MASK(core_id); - skl->boot_complete = false; - - ret = skl_dsp_enable_core(ctx); - if (ret < 0) { - dev_err(ctx->dev, "enable dsp core failed ret: %d\n", ret); + if (skl->fw_loaded == false) { + skl->boot_complete = false; + ret = bxt_load_base_firmware(ctx); + if (ret < 0) + dev_err(ctx->dev, "reload fw failed: %d\n", ret); return ret; } - /* enable interrupt */ - skl_ipc_int_enable(ctx); - skl_ipc_op_int_enable(ctx); + /* If core 0 is being turned on, turn on core 1 as well */ + if (core_id == SKL_DSP_CORE0_ID) + ret = skl_dsp_core_power_up(ctx, core_mask | + SKL_DSP_CORE_MASK(1)); + else + ret = skl_dsp_core_power_up(ctx, core_mask); + + if (ret < 0) + goto err; + + if (core_id == SKL_DSP_CORE0_ID) { + + /* + * Enable interrupt after SPA is set and before + * DSP is unstalled + */ + skl_ipc_int_enable(ctx); + skl_ipc_op_int_enable(ctx); + skl->boot_complete = false; + } - ret = wait_event_timeout(skl->boot_wait, skl->boot_complete, - msecs_to_jiffies(SKL_IPC_BOOT_MSECS)); - if (ret == 0) { - dev_err(ctx->dev, "ipc: error DSP boot timeout\n"); - dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n", - sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE), - sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS)); - return -EIO; + ret = skl_dsp_start_core(ctx, core_mask); + if (ret < 0) + goto err; + + if (core_id == SKL_DSP_CORE0_ID) { + ret = wait_event_timeout(skl->boot_wait, + skl->boot_complete, + msecs_to_jiffies(SKL_IPC_BOOT_MSECS)); + + /* If core 1 was turned on for booting core 0, turn it off */ + skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1)); + if (ret == 0) { + dev_err(ctx->dev, "%s: DSP boot timeout\n", __func__); + dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n", + sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE), + sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS)); + dev_err(ctx->dev, "Failed to set core0 to D0 state\n"); + ret = -EIO; + goto err; + } + } + + /* Tell FW if additional core in now On */ + + if (core_id != SKL_DSP_CORE0_ID) { + dx.core_mask = core_mask; + dx.dx_mask = core_mask; + + ret = skl_ipc_set_dx(&skl->ipc, BXT_INSTANCE_ID, + BXT_BASE_FW_MODULE_ID, &dx); + if (ret < 0) { + dev_err(ctx->dev, "IPC set_dx for core %d fail: %d\n", + core_id, ret); + goto err; + } } - skl_dsp_set_state_locked(ctx, SKL_DSP_RUNNING); + skl->cores.state[core_id] = SKL_DSP_RUNNING; return 0; +err: + if (core_id == SKL_DSP_CORE0_ID) + core_mask |= SKL_DSP_CORE_MASK(1); + skl_dsp_disable_core(ctx, core_mask); + + return ret; } -static int bxt_set_dsp_D3(struct sst_dsp *ctx) +static int bxt_set_dsp_D3(struct sst_dsp *ctx, unsigned int core_id) { + int ret; struct skl_ipc_dxstate_info dx; struct skl_sst *skl = ctx->thread_context; - int ret = 0; + unsigned int core_mask = SKL_DSP_CORE_MASK(core_id); - if (!is_skl_dsp_running(ctx)) - return ret; - - dx.core_mask = SKL_DSP_CORE0_MASK; + dx.core_mask = core_mask; dx.dx_mask = SKL_IPC_D3_MASK; - ret = skl_ipc_set_dx(&skl->ipc, SKL_INSTANCE_ID, - SKL_BASE_FW_MODULE_ID, &dx); - if (ret < 0) { - dev_err(ctx->dev, "Failed to set DSP to D3 state: %d\n", ret); - return ret; - } + dev_dbg(ctx->dev, "core mask=%x dx_mask=%x\n", + dx.core_mask, dx.dx_mask); + + ret = skl_ipc_set_dx(&skl->ipc, BXT_INSTANCE_ID, + BXT_BASE_FW_MODULE_ID, &dx); + if (ret < 0) + dev_err(ctx->dev, + "Failed to set DSP to D3:core id = %d;Continue reset\n", + core_id); - ret = skl_dsp_disable_core(ctx); + ret = skl_dsp_disable_core(ctx, core_mask); if (ret < 0) { - dev_err(ctx->dev, "disbale dsp core failed: %d\n", ret); - ret = -EIO; + dev_err(ctx->dev, "Failed to disable core %d", ret); + return ret; } - - skl_dsp_set_state_locked(ctx, SKL_DSP_RESET); + skl->cores.state[core_id] = SKL_DSP_RESET; return 0; } @@ -274,6 +371,7 @@ int bxt_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq, skl->dev = dev; skl_dev.thread_context = skl; + INIT_LIST_HEAD(&skl->uuid_list); skl->dsp = skl_dsp_ctx_init(dev, &skl_dev, irq); if (!skl->dsp) { @@ -291,10 +389,12 @@ int bxt_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq, sst_dsp_mailbox_init(sst, (BXT_ADSP_SRAM0_BASE + SKL_ADSP_W0_STAT_SZ), SKL_ADSP_W0_UP_SZ, BXT_ADSP_SRAM1_BASE, SKL_ADSP_W1_SZ); + INIT_LIST_HEAD(&sst->module_list); ret = skl_ipc_init(dev, skl); if (ret) return ret; + skl->cores.count = 2; skl->boot_complete = false; init_waitqueue_head(&skl->boot_wait); @@ -304,6 +404,8 @@ int bxt_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq, return ret; } + skl_dsp_init_core_state(sst); + if (dsp) *dsp = skl; @@ -314,6 +416,7 @@ EXPORT_SYMBOL_GPL(bxt_sst_dsp_init); void bxt_sst_dsp_cleanup(struct device *dev, struct skl_sst *ctx) { + skl_freeup_uuid_list(ctx); skl_ipc_free(&ctx->ipc); ctx->dsp->cl_dev.ops.cl_cleanup_controller(ctx->dsp); |