summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c2
-rw-r--r--drivers/serial/8250_pci.c8
-rw-r--r--drivers/serial/bcm63xx_uart.c4
-rw-r--r--drivers/serial/of_serial.c1
-rw-r--r--drivers/serial/serial_cs.c143
-rw-r--r--drivers/serial/sh-sci.c2
-rw-r--r--drivers/serial/suncore.c37
-rw-r--r--drivers/serial/suncore.h5
-rw-r--r--drivers/serial/sunhv.c2
-rw-r--r--drivers/serial/sunsab.c9
-rw-r--r--drivers/serial/sunsu.c36
-rw-r--r--drivers/serial/sunzilog.c8
12 files changed, 115 insertions, 142 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index b1ae774016f1..737b4c960971 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1089,7 +1089,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
if (!up->port.iobase && !up->port.mapbase && !up->port.membase)
return;
- DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ",
+ DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ",
serial_index(&up->port), up->port.iobase, up->port.membase);
/*
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 42e8550cd2b6..b28af13c45a1 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2383,7 +2383,7 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
break;
#ifdef SERIAL_DEBUG_PCI
- printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n",
+ printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n",
serial_port.iobase, serial_port.irq, serial_port.iotype);
#endif
@@ -3139,6 +3139,12 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_115200 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_4_460800 },
diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c
index beddaa6e9069..37ad0c449937 100644
--- a/drivers/serial/bcm63xx_uart.c
+++ b/drivers/serial/bcm63xx_uart.c
@@ -242,7 +242,7 @@ static void bcm_uart_do_rx(struct uart_port *port)
* higher than fifo size anyway since we're much faster than
* serial port */
max_count = 32;
- tty = port->info->port.tty;
+ tty = port->state->port.tty;
do {
unsigned int iestat, c, cstat;
char flag;
@@ -318,7 +318,7 @@ static void bcm_uart_do_tx(struct uart_port *port)
return;
}
- xmit = &port->info->xmit;
+ xmit = &port->state->xmit;
if (uart_circ_empty(xmit))
goto txq_empty;
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 02406ba6da1c..cdf172eda2e3 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -161,6 +161,7 @@ static int of_platform_serial_remove(struct of_device *ofdev)
static struct of_device_id __devinitdata of_platform_serial_table[] = {
{ .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, },
{ .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, },
+ { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, },
{ .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, },
{ .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, },
{ .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, },
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 7c7914f5fa02..fc413f0f8dd2 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -54,14 +54,6 @@
#include "8250.h"
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -121,24 +113,20 @@ static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_
static int quirk_post_ibm(struct pcmcia_device *link)
{
conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
- int last_ret, last_fn;
+ int ret;
+
+ ret = pcmcia_access_configuration_register(link, &reg);
+ if (ret)
+ goto failed;
- last_ret = pcmcia_access_configuration_register(link, &reg);
- if (last_ret) {
- last_fn = AccessConfigurationRegister;
- goto cs_failed;
- }
reg.Action = CS_WRITE;
reg.Value = reg.Value | 1;
- last_ret = pcmcia_access_configuration_register(link, &reg);
- if (last_ret) {
- last_fn = AccessConfigurationRegister;
- goto cs_failed;
- }
+ ret = pcmcia_access_configuration_register(link, &reg);
+ if (ret)
+ goto failed;
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
+ failed:
return -ENODEV;
}
@@ -283,7 +271,7 @@ static void serial_remove(struct pcmcia_device *link)
struct serial_info *info = link->priv;
int i;
- DEBUG(0, "serial_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "serial_release\n");
/*
* Recheck to see if the device is still configured.
@@ -334,7 +322,7 @@ static int serial_probe(struct pcmcia_device *link)
{
struct serial_info *info;
- DEBUG(0, "serial_attach()\n");
+ dev_dbg(&link->dev, "serial_attach()\n");
/* Create new serial device */
info = kzalloc(sizeof (*info), GFP_KERNEL);
@@ -346,7 +334,6 @@ static int serial_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
if (do_sound) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -370,7 +357,7 @@ static void serial_detach(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
- DEBUG(0, "serial_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "serial_detach\n");
/*
* Ensure any outstanding scheduled tasks are completed.
@@ -399,7 +386,7 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
port.irq = irq;
port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
port.uartclk = 1843200;
- port.dev = &handle_to_dev(handle);
+ port.dev = &handle->dev;
if (buggy_uart)
port.flags |= UPF_BUGGY_UART;
@@ -426,21 +413,6 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
/*====================================================================*/
-static int
-first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
-{
- int i;
- i = pcmcia_get_first_tuple(handle, tuple);
- if (i != 0)
- return i;
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != 0)
- return i;
- return pcmcia_parse_tuple(tuple, parse);
-}
-
-/*====================================================================*/
-
static int simple_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cf,
cistpl_cftable_entry_t *dflt,
@@ -522,15 +494,13 @@ static int simple_config(struct pcmcia_device *link)
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
- cs_error(link, RequestIO, i);
return -1;
found_port:
i = pcmcia_request_irq(link, &link->irq);
- if (i != 0) {
- cs_error(link, RequestIRQ, i);
+ if (i != 0)
link->irq.AssignedIRQ = 0;
- }
+
if (info->multi && (info->manfid == MANFID_3COM))
link->conf.ConfigIndex &= ~(0x08);
@@ -541,10 +511,8 @@ found_port:
info->quirk->config(link);
i = pcmcia_request_configuration(link, &link->conf);
- if (i != 0) {
- cs_error(link, RequestConfiguration, i);
+ if (i != 0)
return -1;
- }
return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
}
@@ -613,7 +581,6 @@ static int multi_config(struct pcmcia_device *link)
/* FIXME: comment does not fit, error handling does not fit */
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
- cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
@@ -624,10 +591,8 @@ static int multi_config(struct pcmcia_device *link)
info->quirk->config(link);
i = pcmcia_request_configuration(link, &link->conf);
- if (i != 0) {
- cs_error(link, RequestConfiguration, i);
+ if (i != 0)
return -ENODEV;
- }
/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
* 8 registers are for the UART, the others are extra registers.
@@ -665,6 +630,25 @@ static int multi_config(struct pcmcia_device *link)
return 0;
}
+static int serial_check_for_multi(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ struct serial_info *info = p_dev->priv;
+
+ if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
+ info->multi = cf->io.win[0].len >> 3;
+
+ if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
+ (cf->io.win[1].len == 8))
+ info->multi = 2;
+
+ return 0; /* break */
+}
+
+
/*======================================================================
serial_config() is scheduled to run after a CARD_INSERTION event
@@ -676,46 +660,14 @@ static int multi_config(struct pcmcia_device *link)
static int serial_config(struct pcmcia_device * link)
{
struct serial_info *info = link->priv;
- struct serial_cfg_mem *cfg_mem;
- tuple_t *tuple;
- u_char *buf;
- cisparse_t *parse;
- cistpl_cftable_entry_t *cf;
- int i, last_ret, last_fn;
-
- DEBUG(0, "serial_config(0x%p)\n", link);
-
- cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
- if (!cfg_mem)
- goto failed;
+ int i;
- tuple = &cfg_mem->tuple;
- parse = &cfg_mem->parse;
- cf = &parse->cftable_entry;
- buf = cfg_mem->buf;
-
- tuple->TupleData = (cisdata_t *) buf;
- tuple->TupleOffset = 0;
- tuple->TupleDataMax = 255;
- tuple->Attributes = 0;
-
- /* Get configuration register information */
- tuple->DesiredTuple = CISTPL_CONFIG;
- last_ret = first_tuple(link, tuple, parse);
- if (last_ret != 0) {
- last_fn = ParseTuple;
- goto cs_failed;
- }
- link->conf.ConfigBase = parse->config.base;
- link->conf.Present = parse->config.rmask[0];
+ dev_dbg(&link->dev, "serial_config\n");
/* Is this a compliant multifunction card? */
- tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
- tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
- info->multi = (first_tuple(link, tuple, parse) == 0);
+ info->multi = (link->socket->functions > 1);
/* Is this a multiport card? */
- tuple->DesiredTuple = CISTPL_MANFID;
info->manfid = link->manf_id;
info->prodid = link->card_id;
@@ -730,20 +682,11 @@ static int serial_config(struct pcmcia_device * link)
/* Another check for dual-serial cards: look for either serial or
multifunction cards that ask for appropriate IO port ranges */
- tuple->DesiredTuple = CISTPL_FUNCID;
if ((info->multi == 0) &&
(link->has_func_id) &&
((link->func_id == CISTPL_FUNCID_MULTI) ||
- (link->func_id == CISTPL_FUNCID_SERIAL))) {
- tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
- if (first_tuple(link, tuple, parse) == 0) {
- if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
- info->multi = cf->io.win[0].len >> 3;
- if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
- (cf->io.win[1].len == 8))
- info->multi = 2;
- }
- }
+ (link->func_id == CISTPL_FUNCID_SERIAL)))
+ pcmcia_loop_config(link, serial_check_for_multi, info);
/*
* Apply any multi-port quirk.
@@ -768,14 +711,10 @@ static int serial_config(struct pcmcia_device * link)
goto failed;
link->dev_node = &info->node[0];
- kfree(cfg_mem);
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
serial_remove(link);
- kfree(cfg_mem);
return -ENODEV;
}
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 85119fb7cb50..6498bd1fb6dd 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -1143,7 +1143,7 @@ static void serial_console_write(struct console *co, const char *s,
while ((sci_in(port, SCxSR) & bits) != bits)
cpu_relax();
- if (sci_port->disable);
+ if (sci_port->disable)
sci_port->disable(port);
}
diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
index a2d4a19550ab..ed7d958b0a01 100644
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -53,20 +53,21 @@ void sunserial_unregister_minors(struct uart_driver *drv, int count)
EXPORT_SYMBOL(sunserial_unregister_minors);
int sunserial_console_match(struct console *con, struct device_node *dp,
- struct uart_driver *drv, int line)
+ struct uart_driver *drv, int line, bool ignore_line)
{
- int off;
-
if (!con || of_console_device != dp)
return 0;
- off = 0;
- if (of_console_options &&
- *of_console_options == 'b')
- off = 1;
+ if (!ignore_line) {
+ int off = 0;
- if ((line & 1) != off)
- return 0;
+ if (of_console_options &&
+ *of_console_options == 'b')
+ off = 1;
+
+ if ((line & 1) != off)
+ return 0;
+ }
con->index = line;
drv->cons = con;
@@ -76,23 +77,24 @@ int sunserial_console_match(struct console *con, struct device_node *dp,
}
EXPORT_SYMBOL(sunserial_console_match);
-void
-sunserial_console_termios(struct console *con)
+void sunserial_console_termios(struct console *con, struct device_node *uart_dp)
{
- struct device_node *dp;
- const char *od, *mode, *s;
+ const char *mode, *s;
char mode_prop[] = "ttyX-mode";
int baud, bits, stop, cflag;
char parity;
- dp = of_find_node_by_path("/options");
- od = of_get_property(dp, "output-device", NULL);
- if (!strcmp(od, "rsc")) {
- mode = of_get_property(of_console_device,
+ if (!strcmp(uart_dp->name, "rsc") ||
+ !strcmp(uart_dp->name, "rsc-console") ||
+ !strcmp(uart_dp->name, "rsc-control")) {
+ mode = of_get_property(uart_dp,
"ssp-console-modes", NULL);
if (!mode)
mode = "115200,8,n,1,-";
+ } else if (!strcmp(uart_dp->name, "lom-console")) {
+ mode = "9600,8,n,1,-";
} else {
+ struct device_node *dp;
char c;
c = 'a';
@@ -101,6 +103,7 @@ sunserial_console_termios(struct console *con)
mode_prop[3] = c;
+ dp = of_find_node_by_path("/options");
mode = of_get_property(dp, mode_prop, NULL);
if (!mode)
mode = "9600,8,n,1,-";
diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h
index 042668aa602e..db2057936c31 100644
--- a/drivers/serial/suncore.h
+++ b/drivers/serial/suncore.h
@@ -26,7 +26,8 @@ extern int sunserial_register_minors(struct uart_driver *, int);
extern void sunserial_unregister_minors(struct uart_driver *, int);
extern int sunserial_console_match(struct console *, struct device_node *,
- struct uart_driver *, int);
-extern void sunserial_console_termios(struct console *);
+ struct uart_driver *, int, bool);
+extern void sunserial_console_termios(struct console *,
+ struct device_node *);
#endif /* !(_SERIAL_SUN_H) */
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index d548652dee50..d14cca7fb88d 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -566,7 +566,7 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m
goto out_free_con_read_page;
sunserial_console_match(&sunhv_console, op->node,
- &sunhv_reg, port->line);
+ &sunhv_reg, port->line, false);
err = uart_add_one_port(&sunhv_reg, port);
if (err)
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index d1ad34128635..d514e28d0755 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -883,7 +883,7 @@ static int sunsab_console_setup(struct console *con, char *options)
printk("Console: ttyS%d (SAB82532)\n",
(sunsab_reg.minor - 64) + con->index);
- sunserial_console_termios(con);
+ sunserial_console_termios(con, to_of_device(up->port.dev)->node);
switch (con->cflag & CBAUD) {
case B150: baud = 150; break;
@@ -1027,10 +1027,12 @@ static int __devinit sab_probe(struct of_device *op, const struct of_device_id *
goto out1;
sunserial_console_match(SUNSAB_CONSOLE(), op->node,
- &sunsab_reg, up[0].port.line);
+ &sunsab_reg, up[0].port.line,
+ false);
sunserial_console_match(SUNSAB_CONSOLE(), op->node,
- &sunsab_reg, up[1].port.line);
+ &sunsab_reg, up[1].port.line,
+ false);
err = uart_add_one_port(&sunsab_reg, &up[0].port);
if (err)
@@ -1116,7 +1118,6 @@ static int __init sunsab_init(void)
if (!sunsab_ports)
return -ENOMEM;
- sunsab_reg.cons = SUNSAB_CONSOLE();
err = sunserial_register_minors(&sunsab_reg, num_channels);
if (err) {
kfree(sunsab_ports);
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 68d262b15749..170d3d68c8f0 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1329,11 +1329,9 @@ static void sunsu_console_write(struct console *co, const char *s,
*/
static int __init sunsu_console_setup(struct console *co, char *options)
{
+ static struct ktermios dummy;
+ struct ktermios termios;
struct uart_port *port;
- int baud = 9600;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
printk("Console: ttyS%d (SU)\n",
(sunsu_reg.minor - 64) + co->index);
@@ -1352,10 +1350,15 @@ static int __init sunsu_console_setup(struct console *co, char *options)
*/
spin_lock_init(&port->lock);
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
+ /* Get firmware console settings. */
+ sunserial_console_termios(co, to_of_device(port->dev)->node);
- return uart_set_options(port, co, baud, parity, bits, flow);
+ memset(&termios, 0, sizeof(struct ktermios));
+ termios.c_cflag = co->cflag;
+ port->mctrl |= TIOCM_DTR;
+ port->ops->set_termios(port, &termios, &dummy);
+
+ return 0;
}
static struct console sunsu_console = {
@@ -1409,6 +1412,7 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
struct uart_sunsu_port *up;
struct resource *rp;
enum su_type type;
+ bool ignore_line;
int err;
type = su_get_type(dp);
@@ -1467,8 +1471,14 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
up->port.ops = &sunsu_pops;
+ ignore_line = false;
+ if (!strcmp(dp->name, "rsc-console") ||
+ !strcmp(dp->name, "lom-console"))
+ ignore_line = true;
+
sunserial_console_match(SUNSU_CONSOLE(), dp,
- &sunsu_reg, up->port.line);
+ &sunsu_reg, up->port.line,
+ ignore_line);
err = uart_add_one_port(&sunsu_reg, &up->port);
if (err)
goto out_unmap;
@@ -1517,6 +1527,10 @@ static const struct of_device_id su_match[] = {
.name = "serial",
.compatible = "su",
},
+ {
+ .type = "serial",
+ .compatible = "su",
+ },
{},
};
MODULE_DEVICE_TABLE(of, su_match);
@@ -1548,6 +1562,12 @@ static int __init sunsu_init(void)
num_uart++;
}
}
+ for_each_node_by_type(dp, "serial") {
+ if (of_device_is_compatible(dp, "su")) {
+ if (su_get_type(dp) == SU_PORT_PORT)
+ num_uart++;
+ }
+ }
if (num_uart) {
err = sunserial_register_minors(&sunsu_reg, num_uart);
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index ef693ae22e7f..2c7a66af4f52 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1180,7 +1180,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options)
(sunzilog_reg.minor - 64) + con->index, con->index);
/* Get firmware console settings. */
- sunserial_console_termios(con);
+ sunserial_console_termios(con, to_of_device(up->port.dev)->node);
/* Firmware console speed is limited to 150-->38400 baud so
* this hackish cflag thing is OK.
@@ -1416,7 +1416,8 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
if (!keyboard_mouse) {
if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
- &sunzilog_reg, up[0].port.line))
+ &sunzilog_reg, up[0].port.line,
+ false))
up->flags |= SUNZILOG_FLAG_IS_CONS;
err = uart_add_one_port(&sunzilog_reg, &up[0].port);
if (err) {
@@ -1425,7 +1426,8 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
return err;
}
if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
- &sunzilog_reg, up[1].port.line))
+ &sunzilog_reg, up[1].port.line,
+ false))
up->flags |= SUNZILOG_FLAG_IS_CONS;
err = uart_add_one_port(&sunzilog_reg, &up[1].port);
if (err) {
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 08:50:40 +0000