diff options
Diffstat (limited to 'drivers/iio')
-rw-r--r-- | drivers/iio/accel/mma8452.c | 8 | ||||
-rw-r--r-- | drivers/iio/adc/mcp320x.c | 2 | ||||
-rw-r--r-- | drivers/iio/adc/vf610_adc.c | 2 | ||||
-rw-r--r-- | drivers/iio/light/stk3310.c | 26 | ||||
-rw-r--r-- | drivers/iio/magnetometer/Kconfig | 1 | ||||
-rw-r--r-- | drivers/iio/magnetometer/bmc150_magn.c | 4 | ||||
-rw-r--r-- | drivers/iio/magnetometer/mmc35240.c | 12 | ||||
-rw-r--r-- | drivers/iio/temperature/mlx90614.c | 2 |
8 files changed, 31 insertions, 26 deletions
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index e8e2077c7244..13ea1ea23328 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -557,21 +557,21 @@ static void mma8452_transient_interrupt(struct iio_dev *indio_dev) if (src & MMA8452_TRANSIENT_SRC_XTRANSE) iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X, - IIO_EV_TYPE_THRESH, + IIO_EV_TYPE_MAG, IIO_EV_DIR_RISING), ts); if (src & MMA8452_TRANSIENT_SRC_YTRANSE) iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Y, - IIO_EV_TYPE_THRESH, + IIO_EV_TYPE_MAG, IIO_EV_DIR_RISING), ts); if (src & MMA8452_TRANSIENT_SRC_ZTRANSE) iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Z, - IIO_EV_TYPE_THRESH, + IIO_EV_TYPE_MAG, IIO_EV_DIR_RISING), ts); } @@ -644,7 +644,7 @@ static int mma8452_reg_access_dbg(struct iio_dev *indio_dev, static const struct iio_event_spec mma8452_transient_event[] = { { - .type = IIO_EV_TYPE_THRESH, + .type = IIO_EV_TYPE_MAG, .dir = IIO_EV_DIR_RISING, .mask_separate = BIT(IIO_EV_INFO_ENABLE), .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c index 8d9c9b9215dd..d819823f7257 100644 --- a/drivers/iio/adc/mcp320x.c +++ b/drivers/iio/adc/mcp320x.c @@ -299,6 +299,8 @@ static int mcp320x_probe(struct spi_device *spi) indio_dev->channels = chip_info->channels; indio_dev->num_channels = chip_info->num_channels; + adc->chip_info = chip_info; + adc->transfer[0].tx_buf = &adc->tx_buf; adc->transfer[0].len = sizeof(adc->tx_buf); adc->transfer[1].rx_buf = adc->rx_buf; diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c index 480f335a0f9f..819632bf1fda 100644 --- a/drivers/iio/adc/vf610_adc.c +++ b/drivers/iio/adc/vf610_adc.c @@ -635,7 +635,7 @@ static int vf610_adc_reg_access(struct iio_dev *indio_dev, struct vf610_adc *info = iio_priv(indio_dev); if ((readval == NULL) || - (!(reg % 4) || (reg > VF610_REG_ADC_PCTL))) + ((reg % 4) || (reg > VF610_REG_ADC_PCTL))) return -EINVAL; *readval = readl(info->regs + reg); diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c index c1a218236be5..11a027adc204 100644 --- a/drivers/iio/light/stk3310.c +++ b/drivers/iio/light/stk3310.c @@ -200,7 +200,7 @@ static int stk3310_read_event(struct iio_dev *indio_dev, int *val, int *val2) { u8 reg; - u16 buf; + __be16 buf; int ret; struct stk3310_data *data = iio_priv(indio_dev); @@ -222,7 +222,7 @@ static int stk3310_read_event(struct iio_dev *indio_dev, dev_err(&data->client->dev, "register read failed\n"); return ret; } - *val = swab16(buf); + *val = be16_to_cpu(buf); return IIO_VAL_INT; } @@ -235,7 +235,7 @@ static int stk3310_write_event(struct iio_dev *indio_dev, int val, int val2) { u8 reg; - u16 buf; + __be16 buf; int ret; unsigned int index; struct stk3310_data *data = iio_priv(indio_dev); @@ -252,7 +252,7 @@ static int stk3310_write_event(struct iio_dev *indio_dev, else return -EINVAL; - buf = swab16(val); + buf = cpu_to_be16(val); ret = regmap_bulk_write(data->regmap, reg, &buf, 2); if (ret < 0) dev_err(&client->dev, "failed to set PS threshold!\n"); @@ -301,7 +301,7 @@ static int stk3310_read_raw(struct iio_dev *indio_dev, int *val, int *val2, long mask) { u8 reg; - u16 buf; + __be16 buf; int ret; unsigned int index; struct stk3310_data *data = iio_priv(indio_dev); @@ -322,7 +322,7 @@ static int stk3310_read_raw(struct iio_dev *indio_dev, mutex_unlock(&data->lock); return ret; } - *val = swab16(buf); + *val = be16_to_cpu(buf); mutex_unlock(&data->lock); return IIO_VAL_INT; case IIO_CHAN_INFO_INT_TIME: @@ -608,13 +608,7 @@ static int stk3310_probe(struct i2c_client *client, if (ret < 0) return ret; - ret = iio_device_register(indio_dev); - if (ret < 0) { - dev_err(&client->dev, "device_register failed\n"); - stk3310_set_state(data, STK3310_STATE_STANDBY); - } - - if (client->irq <= 0) + if (client->irq < 0) client->irq = stk3310_gpio_probe(client); if (client->irq >= 0) { @@ -629,6 +623,12 @@ static int stk3310_probe(struct i2c_client *client, client->irq); } + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&client->dev, "device_register failed\n"); + stk3310_set_state(data, STK3310_STATE_STANDBY); + } + return ret; } diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index dcadfc4f0661..efb9350b0d76 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -90,6 +90,7 @@ config IIO_ST_MAGN_SPI_3AXIS config BMC150_MAGN tristate "Bosch BMC150 Magnetometer Driver" depends on I2C + select REGMAP_I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help diff --git a/drivers/iio/magnetometer/bmc150_magn.c b/drivers/iio/magnetometer/bmc150_magn.c index d4c178869991..1347a1f2e46f 100644 --- a/drivers/iio/magnetometer/bmc150_magn.c +++ b/drivers/iio/magnetometer/bmc150_magn.c @@ -706,11 +706,11 @@ static int bmc150_magn_init(struct bmc150_magn_data *data) goto err_poweroff; } if (chip_id != BMC150_MAGN_CHIP_ID_VAL) { - dev_err(&data->client->dev, "Invalid chip id 0x%x\n", ret); + dev_err(&data->client->dev, "Invalid chip id 0x%x\n", chip_id); ret = -ENODEV; goto err_poweroff; } - dev_dbg(&data->client->dev, "Chip id %x\n", ret); + dev_dbg(&data->client->dev, "Chip id %x\n", chip_id); preset = bmc150_magn_presets_table[BMC150_MAGN_DEFAULT_PRESET]; ret = bmc150_magn_set_odr(data, preset.odr); diff --git a/drivers/iio/magnetometer/mmc35240.c b/drivers/iio/magnetometer/mmc35240.c index d927397a6ef7..706ebfd6297f 100644 --- a/drivers/iio/magnetometer/mmc35240.c +++ b/drivers/iio/magnetometer/mmc35240.c @@ -202,8 +202,8 @@ static int mmc35240_hw_set(struct mmc35240_data *data, bool set) coil_bit = MMC35240_CTRL0_RESET_BIT; return regmap_update_bits(data->regmap, MMC35240_REG_CTRL0, - MMC35240_CTRL0_REFILL_BIT, - coil_bit); + coil_bit, coil_bit); + } static int mmc35240_init(struct mmc35240_data *data) @@ -222,14 +222,15 @@ static int mmc35240_init(struct mmc35240_data *data) /* * make sure we restore sensor characteristics, by doing - * a RESET/SET sequence + * a SET/RESET sequence, the axis polarity being naturally + * aligned after RESET */ - ret = mmc35240_hw_set(data, false); + ret = mmc35240_hw_set(data, true); if (ret < 0) return ret; usleep_range(MMC53240_WAIT_SET_RESET, MMC53240_WAIT_SET_RESET + 1); - ret = mmc35240_hw_set(data, true); + ret = mmc35240_hw_set(data, false); if (ret < 0) return ret; @@ -503,6 +504,7 @@ static int mmc35240_probe(struct i2c_client *client, } data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); data->client = client; data->regmap = regmap; data->res = MMC35240_16_BITS_SLOW; diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c index cb2e8ad8bfdc..7a2b639eaa96 100644 --- a/drivers/iio/temperature/mlx90614.c +++ b/drivers/iio/temperature/mlx90614.c @@ -204,7 +204,7 @@ static int mlx90614_read_raw(struct iio_dev *indio_dev, *val = ret; return IIO_VAL_INT; case IIO_CHAN_INFO_OFFSET: - *val = 13657; + *val = -13657; *val2 = 500000; return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_SCALE: |