diff options
Diffstat (limited to 'arch/powerpc/kernel/head_32.S')
| -rw-r--r-- | arch/powerpc/kernel/head_32.S | 71 |
1 files changed, 38 insertions, 33 deletions
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 7d73a13450b0..a5b13ae7fd20 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -48,20 +48,17 @@ mtspr SPRN_DBAT##n##L,RB; \ 1: - .text + .section .text.head, "ax" .stabs "arch/powerpc/kernel/",N_SO,0,0,0f .stabs "head_32.S",N_SO,0,0,0f 0: - .globl _stext -_stext: +_ENTRY(_stext); /* * _start is defined this way because the XCOFF loader in the OpenFirmware * on the powermac expects the entry point to be a procedure descriptor. */ - .text - .globl _start -_start: +_ENTRY(_start); /* * These are here for legacy reasons, the kernel used to * need to look like a coff function entry for the pmac @@ -152,6 +149,9 @@ __after_mmu_off: #if defined(CONFIG_BOOTX_TEXT) bl setup_disp_bat #endif +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM + bl setup_cpm_bat +#endif /* * Call setup_cpu for CPU 0 and initialize 6xx Idle @@ -469,16 +469,16 @@ InstructionTLBMiss: mfctr r0 /* Get PTE (linux-style) and check access */ mfspr r3,SPRN_IMISS - lis r1,KERNELBASE@h /* check if kernel address */ - cmplw 0,r3,r1 + lis r1,PAGE_OFFSET@h /* check if kernel address */ + cmplw 0,r1,r3 mfspr r2,SPRN_SPRG3 li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */ lwz r2,PGDIR(r2) - blt+ 112f + bge- 112f + mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */ + rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */ lis r2,swapper_pg_dir@ha /* if kernel address, use */ addi r2,r2,swapper_pg_dir@l /* kernel page table */ - mfspr r1,SPRN_SRR1 /* and MSR_PR bit from SRR1 */ - rlwinm r1,r1,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */ 112: tophys(r2,r2) rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */ lwz r2,0(r2) /* get pmd entry */ @@ -543,16 +543,16 @@ DataLoadTLBMiss: mfctr r0 /* Get PTE (linux-style) and check access */ mfspr r3,SPRN_DMISS - lis r1,KERNELBASE@h /* check if kernel address */ - cmplw 0,r3,r1 + lis r1,PAGE_OFFSET@h /* check if kernel address */ + cmplw 0,r1,r3 mfspr r2,SPRN_SPRG3 li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */ lwz r2,PGDIR(r2) - blt+ 112f + bge- 112f + mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */ + rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */ lis r2,swapper_pg_dir@ha /* if kernel address, use */ addi r2,r2,swapper_pg_dir@l /* kernel page table */ - mfspr r1,SPRN_SRR1 /* and MSR_PR bit from SRR1 */ - rlwinm r1,r1,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */ 112: tophys(r2,r2) rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */ lwz r2,0(r2) /* get pmd entry */ @@ -615,16 +615,16 @@ DataStoreTLBMiss: mfctr r0 /* Get PTE (linux-style) and check access */ mfspr r3,SPRN_DMISS - lis r1,KERNELBASE@h /* check if kernel address */ - cmplw 0,r3,r1 + lis r1,PAGE_OFFSET@h /* check if kernel address */ + cmplw 0,r1,r3 mfspr r2,SPRN_SPRG3 li r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */ lwz r2,PGDIR(r2) - blt+ 112f + bge- 112f + mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */ + rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */ lis r2,swapper_pg_dir@ha /* if kernel address, use */ addi r2,r2,swapper_pg_dir@l /* kernel page table */ - mfspr r1,SPRN_SRR1 /* and MSR_PR bit from SRR1 */ - rlwinm r1,r1,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */ 112: tophys(r2,r2) rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */ lwz r2,0(r2) /* get pmd entry */ @@ -841,7 +841,7 @@ relocate_kernel: * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5. */ -_GLOBAL(copy_and_flush) +_ENTRY(copy_and_flush) addi r5,r5,-4 addi r6,r6,-4 4: li r0,L1_CACHE_BYTES/4 @@ -954,9 +954,9 @@ __secondary_start: * included in CONFIG_6xx */ #if !defined(CONFIG_6xx) -_GLOBAL(__save_cpu_setup) +_ENTRY(__save_cpu_setup) blr -_GLOBAL(__restore_cpu_setup) +_ENTRY(__restore_cpu_setup) blr #endif /* !defined(CONFIG_6xx) */ @@ -1080,7 +1080,7 @@ start_here: /* * Set up the segment registers for a new context. */ -_GLOBAL(set_context) +_ENTRY(set_context) mulli r3,r3,897 /* multiply context by skew factor */ rlwinm r3,r3,4,8,27 /* VSID = (context & 0xfffff) << 4 */ addis r3,r3,0x6000 /* Set Ks, Ku bits */ @@ -1248,6 +1248,19 @@ setup_disp_bat: blr #endif /* CONFIG_BOOTX_TEXT */ +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM +setup_cpm_bat: + lis r8, 0xf000 + ori r8, r8, 0x002a + mtspr SPRN_DBAT1L, r8 + + lis r11, 0xf000 + ori r11, r11, (BL_1M << 2) | 2 + mtspr SPRN_DBAT1U, r11 + + blr +#endif + #ifdef CONFIG_8260 /* Jump into the system reset for the rom. * We first disable the MMU, and then jump to the ROM reset address. @@ -1300,14 +1313,6 @@ empty_zero_page: swapper_pg_dir: .space 4096 -/* - * This space gets a copy of optional info passed to us by the bootstrap - * Used to pass parameters into the kernel like root=/dev/sda1, etc. - */ - .globl cmd_line -cmd_line: - .space 512 - .globl intercept_table intercept_table: .long 0, 0, i0x200, i0x300, i0x400, 0, i0x600, i0x700 |