From 9363c3825ea9ad76561eb48a395349dd29211ed6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 7 Apr 2008 22:47:16 +0900 Subject: libata: rename SFF functions SFF functions have confusing names. Some have sff prefix, some have bmdma, some std, some pci and some none. Unify the naming by... * SFF functions which are common to both BMDMA and non-BMDMA are prefixed with ata_sff_. * SFF functions which are specific to BMDMA are prefixed with ata_bmdma_. * SFF functions which are specific to PCI but apply to both BMDMA and non-BMDMA are prefixed with ata_pci_sff_. * SFF functions which are specific to PCI and BMDMA are prefixed with ata_pci_bmdma_. * Drop generic prefixes from LLD specific routines. For example, bfin_std_dev_select -> bfin_dev_select. The following renames are noteworthy. ata_qc_issue_prot() -> ata_sff_qc_issue() ata_pci_default_filter() -> ata_bmdma_mode_filter() ata_dev_try_classify() -> ata_sff_dev_classify() This rename is in preparation of separating SFF support out of libata core layer. This patch strictly renames functions and doesn't introduce any behavior difference. Signed-off-by: Tejun Heo --- drivers/ata/pata_scc.c | 80 +++++++++++++++++++++++++------------------------- 1 file changed, 40 insertions(+), 40 deletions(-) (limited to 'drivers/ata/pata_scc.c') diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index fba5bed0a641..701d0addae73 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -266,7 +266,7 @@ unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask) printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME); mask &= ~(0xE0 << ATA_SHIFT_UDMA); } - return ata_pci_default_filter(adev, mask); + return ata_bmdma_mode_filter(adev, mask); } /** @@ -274,7 +274,7 @@ unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask) * @ap: Port to which output is sent * @tf: ATA taskfile register set * - * Note: Original code is ata_tf_load(). + * Note: Original code is ata_sff_tf_load(). */ static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf) @@ -341,7 +341,7 @@ static u8 scc_check_status (struct ata_port *ap) * @ap: Port from which input is read * @tf: ATA taskfile register set for storing input * - * Note: Original code is ata_tf_read(). + * Note: Original code is ata_sff_tf_read(). */ static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf) @@ -373,7 +373,7 @@ static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf) * @ap: port to which command is being issued * @tf: ATA taskfile register set * - * Note: Original code is ata_exec_command(). + * Note: Original code is ata_sff_exec_command(). */ static void scc_exec_command (struct ata_port *ap, @@ -382,7 +382,7 @@ static void scc_exec_command (struct ata_port *ap, DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); out_be32(ap->ioaddr.command_addr, tf->command); - ata_pause(ap); + ata_sff_pause(ap); } /** @@ -396,14 +396,14 @@ static u8 scc_check_altstatus (struct ata_port *ap) } /** - * scc_std_dev_select - Select device 0/1 on ATA bus + * scc_dev_select - Select device 0/1 on ATA bus * @ap: ATA channel to manipulate * @device: ATA device (numbered from zero) to select * - * Note: Original code is ata_std_dev_select(). + * Note: Original code is ata_sff_dev_select(). */ -static void scc_std_dev_select (struct ata_port *ap, unsigned int device) +static void scc_dev_select (struct ata_port *ap, unsigned int device) { u8 tmp; @@ -413,7 +413,7 @@ static void scc_std_dev_select (struct ata_port *ap, unsigned int device) tmp = ATA_DEVICE_OBS | ATA_DEV1; out_be32(ap->ioaddr.device_addr, tmp); - ata_pause(ap); + ata_sff_pause(ap); } /** @@ -514,7 +514,7 @@ static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask, * BSY bit to clear */ if (dev0) { - rc = ata_wait_ready(ap, deadline); + rc = ata_sff_wait_ready(ap, deadline); if (rc && rc != -ENODEV) return rc; } @@ -535,7 +535,7 @@ static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask, msleep(50); /* give drive a breather */ } if (dev1) { - rc = ata_wait_ready(ap, deadline); + rc = ata_sff_wait_ready(ap, deadline); if (rc && rc != -ENODEV) return rc; } @@ -571,7 +571,7 @@ static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask, out_be32(ioaddr->ctl_addr, ap->ctl); /* wait a while before checking status */ - ata_wait_after_reset(ap, deadline); + ata_sff_wait_after_reset(ap, deadline); /* Before we perform post reset processing we want to see if * the bus shows 0xFF because the odd clown forgets the D7 @@ -586,16 +586,16 @@ static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask, } /** - * scc_std_softreset - reset host port via ATA SRST + * scc_softreset - reset host port via ATA SRST * @ap: port to reset * @classes: resulting classes of attached devices * @deadline: deadline jiffies for the operation * - * Note: Original code is ata_std_softreset(). + * Note: Original code is ata_sff_softreset(). */ -static int scc_std_softreset(struct ata_link *link, unsigned int *classes, - unsigned long deadline) +static int scc_softreset(struct ata_link *link, unsigned int *classes, + unsigned long deadline) { struct ata_port *ap = link->ap; unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; @@ -628,10 +628,10 @@ static int scc_std_softreset(struct ata_link *link, unsigned int *classes, } /* determine by signature whether we have ATA or ATAPI devices */ - classes[0] = ata_dev_try_classify(&ap->link.device[0], + classes[0] = ata_sff_dev_classify(&ap->link.device[0], devmask & (1 << 0), &err); if (slave_possible && err != 0x81) - classes[1] = ata_dev_try_classify(&ap->link.device[1], + classes[1] = ata_sff_dev_classify(&ap->link.device[1], devmask & (1 << 1), &err); out: @@ -695,7 +695,7 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc) printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME); out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT); /* TBD: SW reset */ - scc_std_softreset(&ap->link, &classes, deadline); + scc_softreset(&ap->link, &classes, deadline); continue; } @@ -721,7 +721,7 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc) in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_altstatus(ap); /* dummy read */ + ata_sff_altstatus(ap); /* dummy read */ } /** @@ -742,7 +742,7 @@ static u8 scc_bmdma_status (struct ata_port *ap) return host_stat; /* errata A252,A308 workaround: Step4 */ - if ((ata_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ)) + if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ)) return (host_stat | ATA_DMA_INTR); /* errata A308 workaround Step5 */ @@ -773,7 +773,7 @@ static u8 scc_bmdma_status (struct ata_port *ap) * @buflen: buffer length * @rw: read/write * - * Note: Original code is ata_data_xfer(). + * Note: Original code is ata_sff_data_xfer(). */ static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf, @@ -815,7 +815,7 @@ static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf, * scc_irq_on - Enable interrupts on a port. * @ap: Port on which interrupts are enabled. * - * Note: Original code is ata_irq_on(). + * Note: Original code is ata_sff_irq_on(). */ static u8 scc_irq_on (struct ata_port *ap) @@ -835,13 +835,13 @@ static u8 scc_irq_on (struct ata_port *ap) } /** - * scc_bmdma_freeze - Freeze BMDMA controller port + * scc_freeze - Freeze BMDMA controller port * @ap: port to freeze * - * Note: Original code is ata_bmdma_freeze(). + * Note: Original code is ata_sff_freeze(). */ -static void scc_bmdma_freeze (struct ata_port *ap) +static void scc_freeze (struct ata_port *ap) { struct ata_ioports *ioaddr = &ap->ioaddr; @@ -868,18 +868,18 @@ static void scc_bmdma_freeze (struct ata_port *ap) static int scc_pata_prereset(struct ata_link *link, unsigned long deadline) { link->ap->cbl = ATA_CBL_PATA80; - return ata_std_prereset(link, deadline); + return ata_sff_prereset(link, deadline); } /** - * scc_std_postreset - standard postreset callback + * scc_postreset - standard postreset callback * @ap: the target ata_port * @classes: classes of attached devices * - * Note: Original code is ata_std_postreset(). + * Note: Original code is ata_sff_postreset(). */ -static void scc_std_postreset(struct ata_link *link, unsigned int *classes) +static void scc_postreset(struct ata_link *link, unsigned int *classes) { struct ata_port *ap = link->ap; @@ -905,13 +905,13 @@ static void scc_std_postreset(struct ata_link *link, unsigned int *classes) } /** - * scc_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. + * scc_irq_clear - Clear PCI IDE BMDMA interrupt. * @ap: Port associated with this ATA transaction. * - * Note: Original code is ata_bmdma_irq_clear(). + * Note: Original code is ata_sff_irq_clear(). */ -static void scc_bmdma_irq_clear (struct ata_port *ap) +static void scc_irq_clear (struct ata_port *ap) { void __iomem *mmio = ap->ioaddr.bmdma_addr; @@ -972,7 +972,7 @@ static struct ata_port_operations scc_pata_ops = { .exec_command = scc_exec_command, .check_status = scc_check_status, .check_altstatus = scc_check_altstatus, - .dev_select = scc_std_dev_select, + .dev_select = scc_dev_select, .bmdma_setup = scc_bmdma_setup, .bmdma_start = scc_bmdma_start, @@ -980,13 +980,13 @@ static struct ata_port_operations scc_pata_ops = { .bmdma_status = scc_bmdma_status, .data_xfer = scc_data_xfer, - .freeze = scc_bmdma_freeze, + .freeze = scc_freeze, .prereset = scc_pata_prereset, - .softreset = scc_std_softreset, - .postreset = scc_std_postreset, + .softreset = scc_softreset, + .postreset = scc_postreset, .post_internal_cmd = scc_bmdma_stop, - .irq_clear = scc_bmdma_irq_clear, + .irq_clear = scc_irq_clear, .irq_on = scc_irq_on, .port_start = scc_port_start, @@ -1140,8 +1140,8 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED, - &scc_sht); + return ata_host_activate(host, pdev->irq, ata_sff_interrupt, + IRQF_SHARED, &scc_sht); } static struct pci_driver scc_pci_driver = { -- cgit v1.2.3