From 4d9be47f3dcf647aff11406b2f868811442d2d02 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sat, 10 Apr 2010 21:32:38 +0100 Subject: ixp4xx: base support for Arcom Vulcan MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds some basic support for the Arcom Vulcan (ixp425 based). Supported devices include: - XR16L551 serial ports - External watchdog - Flash - SRAM - 1-wire id Signed-off-by: Marc Zyngier Cc: Imre Kaloz Cc: Krzysztof Halasa Signed-off-by: Krzysztof Hałasa --- arch/arm/mach-ixp4xx/Kconfig | 8 ++ arch/arm/mach-ixp4xx/Makefile | 1 + arch/arm/mach-ixp4xx/vulcan-setup.c | 246 ++++++++++++++++++++++++++++++++++++ 3 files changed, 255 insertions(+) create mode 100644 arch/arm/mach-ixp4xx/vulcan-setup.c diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 9e5070da17ae..6f991c5ae863 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -140,6 +140,14 @@ config MACH_FSG FSG-3 device. For more information on this platform, see http://www.nslu2-linux.org/wiki/FSG3/HomePage +config MACH_ARCOM_VULCAN + bool + prompt "Arcom/Eurotech Vulcan" + select PCI + help + Say 'Y' here if you want your kernel to support Arcom's + Vulcan board. + # # Certain registers and IRQs are only enabled if supporting IXP465 CPUs # diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index 47d1f60d23fa..ab39693cb716 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o obj-$(CONFIG_MACH_FSG) += fsg-setup.o obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o +obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c new file mode 100644 index 000000000000..465cc5cce687 --- /dev/null +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -0,0 +1,246 @@ +/* + * arch/arm/mach-ixp4xx/vulcan-setup.c + * + * Arcom/Eurotech Vulcan board-setup + * + * Copyright (C) 2010 Marc Zyngier + * + * based on fsg-setup.c: + * Copyright (C) 2008 Rod Whitby + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct flash_platform_data vulcan_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource vulcan_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vulcan_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &vulcan_flash_data, + }, + .resource = &vulcan_flash_resource, + .num_resources = 1, +}; + +static struct platdata_mtd_ram vulcan_sram_data = { + .mapname = "Vulcan SRAM", + .bankwidth = 1, +}; + +static struct resource vulcan_sram_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vulcan_sram = { + .name = "mtd-ram", + .id = 0, + .dev = { + .platform_data = &vulcan_sram_data, + }, + .resource = &vulcan_sram_resource, + .num_resources = 1, +}; + +static struct resource vulcan_uart_resources[] = { + [0] = { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [2] = { + .flags = IORESOURCE_MEM, + }, +}; + +static struct plat_serial8250_port vulcan_uart_data[] = { + [0] = { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + [1] = { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + [2] = { + .irq = IXP4XX_GPIO_IRQ(4), + .irqflags = IRQF_TRIGGER_LOW, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .uartclk = 1843200, + }, + [3] = { + .irq = IXP4XX_GPIO_IRQ(4), + .irqflags = IRQF_TRIGGER_LOW, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .uartclk = 1843200, + }, + { } +}; + +static struct platform_device vulcan_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = vulcan_uart_data, + }, + .resource = vulcan_uart_resources, + .num_resources = ARRAY_SIZE(vulcan_uart_resources), +}; + +static struct eth_plat_info vulcan_plat_eth[] = { + [0] = { + .phy = 0, + .rxq = 3, + .txreadyq = 20, + }, + [1] = { + .phy = 1, + .rxq = 4, + .txreadyq = 21, + }, +}; + +static struct platform_device vulcan_eth[] = { + [0] = { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev = { + .platform_data = &vulcan_plat_eth[0], + }, + }, + [1] = { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev = { + .platform_data = &vulcan_plat_eth[1], + }, + }, +}; + +static struct resource vulcan_max6369_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vulcan_max6369 = { + .name = "max6369_wdt", + .id = -1, + .resource = &vulcan_max6369_resource, + .num_resources = 1, +}; + +static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = { + .pin = 14, +}; + +static struct platform_device vulcan_w1_gpio = { + .name = "w1-gpio", + .id = 0, + .dev = { + .platform_data = &vulcan_w1_gpio_pdata, + }, +}; + +static struct platform_device *vulcan_devices[] __initdata = { + &vulcan_uart, + &vulcan_flash, + &vulcan_sram, + &vulcan_max6369, + &vulcan_eth[0], + &vulcan_eth[1], + &vulcan_w1_gpio, +}; + +static void __init vulcan_init(void) +{ + ixp4xx_sys_init(); + + /* Flash is spread over both CS0 and CS1 */ + vulcan_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + vulcan_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; + *IXP4XX_EXP_CS0 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_STROBE_T(3) | + IXP4XX_EXP_BUS_SIZE(0xF) | + IXP4XX_EXP_BUS_BYTE_RD16 | + IXP4XX_EXP_BUS_WR_EN; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + /* SRAM on CS2, (256kB, 8bit, writable) */ + vulcan_sram_resource.start = IXP4XX_EXP_BUS_BASE(2); + vulcan_sram_resource.end = IXP4XX_EXP_BUS_BASE(2) + SZ_256K - 1; + *IXP4XX_EXP_CS2 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_STROBE_T(1) | + IXP4XX_EXP_BUS_HOLD_T(2) | + IXP4XX_EXP_BUS_SIZE(9) | + IXP4XX_EXP_BUS_SPLT_EN | + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + /* XR16L2551 on CS3 (Moto style, 512 bytes, 8bits, writable) */ + vulcan_uart_resources[2].start = IXP4XX_EXP_BUS_BASE(3); + vulcan_uart_resources[2].end = IXP4XX_EXP_BUS_BASE(3) + 16 - 1; + vulcan_uart_data[2].mapbase = vulcan_uart_resources[2].start; + vulcan_uart_data[3].mapbase = vulcan_uart_data[2].mapbase + 8; + *IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_STROBE_T(3) | + IXP4XX_EXP_BUS_CYCLES(IXP4XX_EXP_BUS_CYCLES_MOTOROLA)| + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + /* GPIOS on CS4 (512 bytes, 8bits, writable) */ + *IXP4XX_EXP_CS4 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + /* max6369 on CS5 (512 bytes, 8bits, writable) */ + vulcan_max6369_resource.start = IXP4XX_EXP_BUS_BASE(5); + vulcan_max6369_resource.end = IXP4XX_EXP_BUS_BASE(5); + *IXP4XX_EXP_CS5 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + platform_add_devices(vulcan_devices, ARRAY_SIZE(vulcan_devices)); +} + +MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan") + /* Maintainer: Marc Zyngier */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = vulcan_init, +MACHINE_END -- cgit v1.2.3 From ee977c2c4f09c36e47c3113ecfe856fcce3ca7b9 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sat, 10 Apr 2010 21:32:39 +0100 Subject: ixp4xx/vulcan: add PCI support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add PCI support for the Vulcan board, supporting USB and CF ports. The PC/104 bus (actually a hack on the second CarBus slot) is not currently supported. Signed-off-by: Marc Zyngier Cc: Imre Kaloz Cc: Krzysztof Halasa Signed-off-by: Krzysztof Hałasa --- arch/arm/mach-ixp4xx/Makefile | 1 + arch/arm/mach-ixp4xx/vulcan-pci.c | 73 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 74 insertions(+) create mode 100644 arch/arm/mach-ixp4xx/vulcan-pci.c diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index ab39693cb716..d807fc367dd3 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -16,6 +16,7 @@ obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o +obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o obj-y += common.o diff --git a/arch/arm/mach-ixp4xx/vulcan-pci.c b/arch/arm/mach-ixp4xx/vulcan-pci.c new file mode 100644 index 000000000000..f3111c6840ef --- /dev/null +++ b/arch/arm/mach-ixp4xx/vulcan-pci.c @@ -0,0 +1,73 @@ +/* + * arch/arch/mach-ixp4xx/vulcan-pci.c + * + * Vulcan board-level PCI initialization + * + * Copyright (C) 2010 Marc Zyngier + * + * based on ixdp425-pci.c: + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 2 +#define INTB 3 + +void __init vulcan_pci_preinit(void) +{ +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + /* + * Cardbus bridge wants way more than the SoC can actually offer, + * and leaves the whole PCI bus in a mess. Artificially limit it + * to 8MB per region. Of course indirect mode doesn't have this + * limitation... + */ + pci_cardbus_mem_size = SZ_8M; + pr_info("Vulcan PCI: limiting CardBus memory size to %dMB\n", + (int)(pci_cardbus_mem_size >> 20)); +#endif + set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static int __init vulcan_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + if (slot == 1) + return IXP4XX_GPIO_IRQ(INTA); + + if (slot == 2) + return IXP4XX_GPIO_IRQ(INTB); + + return -1; +} + +struct hw_pci vulcan_pci __initdata = { + .nr_controllers = 1, + .preinit = vulcan_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = vulcan_map_irq, +}; + +int __init vulcan_pci_init(void) +{ + if (machine_is_arcom_vulcan()) + pci_common_init(&vulcan_pci); + return 0; +} + +subsys_initcall(vulcan_pci_init); -- cgit v1.2.3 From 627634293ae7f4ec864cecd4282650ceae7a5067 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Thu, 27 May 2010 12:40:17 +0200 Subject: IXP4xx: Prevent HSS transmitter lockup by disabling FRaMe signals. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With port configured with PCR_FRM_SYNC_OUTPUT* and external clock, bringing the hdlcX interface up and down without active clock supplied to the HSS causes a TX lockup. We don't support channelized/partial interfaces so FRaMe signals can't be used anyway, disabling them makes the lockup go away. Changes to this logic will be required if we want to support channelized HSS mode (this is most probably bug in NPE-A HSS firmware). Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/ixp4xx_hss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c index 0c2cdde686a0..31b0b4d1f573 100644 --- a/drivers/net/wan/ixp4xx_hss.c +++ b/drivers/net/wan/ixp4xx_hss.c @@ -396,7 +396,7 @@ static void hss_config(struct port *port) msg.cmd = PORT_CONFIG_WRITE; msg.hss_port = port->id; msg.index = HSS_CONFIG_TX_PCR; - msg.data32 = PCR_FRM_SYNC_OUTPUT_RISING | PCR_MSB_ENDIAN | + msg.data32 = PCR_FRM_PULSE_DISABLED | PCR_MSB_ENDIAN | PCR_TX_DATA_ENABLE | PCR_SOF_NO_FBIT; if (port->clock_type == CLOCK_INT) msg.data32 |= PCR_SYNC_CLK_DIR_OUTPUT; -- cgit v1.2.3 From ce057297fdab808d9a071c084b7405bc6c8d14c5 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Sun, 10 Jan 2010 14:20:10 +0100 Subject: IXP4xx: Fix ixp4xx_crypto little-endian operation. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes the following on IXP425 little-endian: NPE-C: firmware functionality 0x5, revision 0x2:1 alg: skcipher: Test 1 failed on encryption for ecb(des)-ixp4xx 00000000: 01 23 45 67 89 ab cd e7 alg: skcipher: Test 1 failed on encryption for ecb(des3_ede)-ixp4xx 00000000: 73 6f 6d 65 64 61 74 61 alg: skcipher: Test 1 failed on encryption for ecb(aes)-ixp4xx 00000000: 00 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff Signed-off-by: Krzysztof Hałasa Acked-by: Christian Hohnstaedt --- drivers/crypto/ixp4xx_crypto.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c index f17ddf37a1ed..0d662213c066 100644 --- a/drivers/crypto/ixp4xx_crypto.c +++ b/drivers/crypto/ixp4xx_crypto.c @@ -97,8 +97,13 @@ struct buffer_desc { u32 phys_next; +#ifdef __ARMEB__ u16 buf_len; u16 pkt_len; +#else + u16 pkt_len; + u16 buf_len; +#endif u32 phys_addr; u32 __reserved[4]; struct buffer_desc *next; @@ -106,17 +111,30 @@ struct buffer_desc { }; struct crypt_ctl { +#ifdef __ARMEB__ u8 mode; /* NPE_OP_* operation mode */ u8 init_len; u16 reserved; +#else + u16 reserved; + u8 init_len; + u8 mode; /* NPE_OP_* operation mode */ +#endif u8 iv[MAX_IVLEN]; /* IV for CBC mode or CTR IV for CTR mode */ u32 icv_rev_aes; /* icv or rev aes */ u32 src_buf; u32 dst_buf; +#ifdef __ARMEB__ u16 auth_offs; /* Authentication start offset */ u16 auth_len; /* Authentication data length */ u16 crypt_offs; /* Cryption start offset */ u16 crypt_len; /* Cryption data length */ +#else + u16 auth_len; /* Authentication data length */ + u16 auth_offs; /* Authentication start offset */ + u16 crypt_len; /* Cryption data length */ + u16 crypt_offs; /* Cryption start offset */ +#endif u32 aadAddr; /* Additional Auth Data Addr for CCM mode */ u32 crypto_ctx; /* NPE Crypto Param structure address */ @@ -652,6 +670,9 @@ static int setup_auth(struct crypto_tfm *tfm, int encrypt, unsigned authsize, /* write cfg word to cryptinfo */ cfgword = algo->cfgword | ( authsize << 6); /* (authsize/4) << 8 */ +#ifndef __ARMEB__ + cfgword ^= 0xAA000000; /* change the "byte swap" flags */ +#endif *(u32*)cinfo = cpu_to_be32(cfgword); cinfo += sizeof(cfgword); -- cgit v1.2.3 From 0409cb0dacb58c8796ab9a5ec1be9550c7bc8553 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Sun, 10 Jan 2010 13:56:13 +0100 Subject: IXP4xx: Make mdio_bus struct static in the Ethernet driver. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/arm/ixp4xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c index 6be8b098b8b4..656e2ae32280 100644 --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c @@ -241,7 +241,7 @@ static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt) static spinlock_t mdio_lock; static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */ -struct mii_bus *mdio_bus; +static struct mii_bus *mdio_bus; static int ports_open; static struct port *npe_port_tab[MAX_NPES]; static struct dma_pool *dma_pool; -- cgit v1.2.3 From 59c290176e0bf14085959124b8a9b55f6e831861 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Sun, 10 Jan 2010 13:55:11 +0100 Subject: IXP4xx: Fix sparse warnings in I/O primitives. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- arch/arm/mach-ixp4xx/include/mach/io.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index 6ea7e2fb2701..de274a1f19d7 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -353,7 +353,7 @@ static inline unsigned int ioread8(const void __iomem *addr) return (unsigned int)inb(port & PIO_MASK); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI - return (unsigned int)__raw_readb(port); + return (unsigned int)__raw_readb(addr); #else return (unsigned int)__indirect_readb(addr); #endif @@ -381,7 +381,7 @@ static inline unsigned int ioread16(const void __iomem *addr) return (unsigned int)inw(port & PIO_MASK); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI - return le16_to_cpu(__raw_readw((u32)port)); + return le16_to_cpu((__force __le16)__raw_readw(addr)); #else return (unsigned int)__indirect_readw(addr); #endif @@ -440,7 +440,7 @@ static inline void iowrite8(u8 value, void __iomem *addr) outb(value, port & PIO_MASK); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writeb(value, port); + __raw_writeb(value, addr); #else __indirect_writeb(value, addr); #endif -- cgit v1.2.3 From 42ea573f872365b0797ddbcee2e1f1f48913f507 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Tue, 16 Mar 2010 22:11:59 +0100 Subject: IXP4xx: Fix LL debugging on little-endian CPU. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit IXP4xx only needs +3 offset for UART registers when running in big-endian mode. Signed-off-by: Krzysztof Hałasa --- arch/arm/mach-ixp4xx/include/mach/debug-macro.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S index 893873eb2a0d..3fc66d6d00a0 100644 --- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S @@ -16,8 +16,10 @@ moveq \rx, #0xc8000000 movne \rx, #0xff000000 orrne \rx, \rx, #0x00b00000 +#ifdef __ARMEB__ add \rx,\rx,#3 @ Uart regs are at off set of 3 if @ byte writes used - Big Endian. +#endif .endm #define UART_SHIFT 2 -- cgit v1.2.3