From 09ed6ba43e659474878b22d40b141a01d09ec857 Mon Sep 17 00:00:00 2001 From: Hersen Wu Date: Thu, 13 Feb 2020 10:50:13 -0500 Subject: drm/amdgpu/display: navi1x copy dcn watermark clock settings to smu resume from s3 (v2) This interface is for dGPU Navi1x. Linux dc-pplib interface depends on window driver dc implementation. For Navi1x, clock settings of dcn watermarks are fixed. the settings should be passed to smu during boot up and resume from s3. boot up: dc calculate dcn watermark clock settings within dc_create, dcn20_resource_construct, then call pplib functions below to pass the settings to smu: smu_set_watermarks_for_clock_ranges smu_set_watermarks_table navi10_set_watermarks_table smu_write_watermarks_table For Renoir, clock settings of dcn watermark are also fixed values. dc has implemented different flow for window driver: dc_hardware_init / dc_set_power_state dcn10_init_hw notify_wm_ranges set_wm_ranges For Linux smu_set_watermarks_for_clock_ranges renoir_set_watermarks_table smu_write_watermarks_table dc_hardware_init -> amdgpu_dm_init dc_set_power_state --> dm_resume therefore, linux dc-pplib interface of navi10/12/14 is different from that of Renoir. v2: add missing unlock in error case Signed-off-by: Hersen Wu Reviewed-by: Evan Quan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 69 +++++++++++++++++++++++ 1 file changed, 69 insertions(+) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index e8f66fbf399e..e997251a8b57 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -1422,6 +1422,73 @@ static void s3_handle_mst(struct drm_device *dev, bool suspend) drm_kms_helper_hotplug_event(dev); } +static int amdgpu_dm_smu_write_watermarks_table(struct amdgpu_device *adev) +{ + struct smu_context *smu = &adev->smu; + int ret = 0; + + if (!is_support_sw_smu(adev)) + return 0; + + /* This interface is for dGPU Navi1x.Linux dc-pplib interface depends + * on window driver dc implementation. + * For Navi1x, clock settings of dcn watermarks are fixed. the settings + * should be passed to smu during boot up and resume from s3. + * boot up: dc calculate dcn watermark clock settings within dc_create, + * dcn20_resource_construct + * then call pplib functions below to pass the settings to smu: + * smu_set_watermarks_for_clock_ranges + * smu_set_watermarks_table + * navi10_set_watermarks_table + * smu_write_watermarks_table + * + * For Renoir, clock settings of dcn watermark are also fixed values. + * dc has implemented different flow for window driver: + * dc_hardware_init / dc_set_power_state + * dcn10_init_hw + * notify_wm_ranges + * set_wm_ranges + * -- Linux + * smu_set_watermarks_for_clock_ranges + * renoir_set_watermarks_table + * smu_write_watermarks_table + * + * For Linux, + * dc_hardware_init -> amdgpu_dm_init + * dc_set_power_state --> dm_resume + * + * therefore, this function apply to navi10/12/14 but not Renoir + * * + */ + switch(adev->asic_type) { + case CHIP_NAVI10: + case CHIP_NAVI14: + case CHIP_NAVI12: + break; + default: + return 0; + } + + mutex_lock(&smu->mutex); + + /* pass data to smu controller */ + if ((smu->watermarks_bitmap & WATERMARKS_EXIST) && + !(smu->watermarks_bitmap & WATERMARKS_LOADED)) { + ret = smu_write_watermarks_table(smu); + + if (ret) { + mutex_unlock(&smu->mutex); + DRM_ERROR("Failed to update WMTABLE!\n"); + return ret; + } + smu->watermarks_bitmap |= WATERMARKS_LOADED; + } + + mutex_unlock(&smu->mutex); + + return 0; +} + /** * dm_hw_init() - Initialize DC device * @handle: The base driver device containing the amdgpu_dm device. @@ -1700,6 +1767,8 @@ static int dm_resume(void *handle) amdgpu_dm_irq_resume_late(adev); + amdgpu_dm_smu_write_watermarks_table(adev); + return 0; } -- cgit v1.2.3