summaryrefslogtreecommitdiff
path: root/drivers/crypto/amcc
AgeCommit message (Collapse)AuthorFilesLines
2017-10-12crypto: crypto4xx - use the correct LE32 format for IV and key defsChristian Lamparter4-56/+64
The hardware expects that the keys, IVs (and inner/outer hashes) are in the le32 format. This patch changes all hardware interface declarations to use the correct LE32 data format for each field. In order to pass __CHECK_ENDIAN__ checks, crypto4xx_memcpy_le has to be honest about the endianness of its parameters. The function was split and moved to the common crypto4xx_core.h header. This allows the compiler to generate better code if the sizes/len is a constant (various *_IV_LEN). Please note that the hardware isn't consistent with the endiannes of the save_digest field in the state record struct though. The hashes produced by GHASH and CBC (for CCM) will be in LE32. Whereas md5 and sha{1/,256,...} do not need any conversion. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-10-12crypto: crypto4xx - add backlog queue supportChristian Lamparter2-9/+41
Previously, If the crypto4xx driver used all available security contexts, it would simply refuse new requests with -EAGAIN. CRYPTO_TFM_REQ_MAY_BACKLOG was ignored. in case of dm-crypt.c's crypt_convert() function this was causing the following errors to manifest, if the system was pushed hard enough: | EXT4-fs warning (dm-1): ext4_end_bio:314: I/O error -5 writing to ino .. | EXT4-fs warning (dm-1): ext4_end_bio:314: I/O error -5 writing to ino .. | EXT4-fs warning (dm-1): ext4_end_bio:314: I/O error -5 writing to ino .. | JBD2: Detected IO errors while flushing file data on dm-1-8 | Aborting journal on device dm-1-8. | EXT4-fs error : ext4_journal_check_start:56: Detected aborted journal | EXT4-fs (dm-1): Remounting filesystem read-only | EXT4-fs : ext4_writepages: jbd2_start: 2048 pages, inode 498...; err -30 (This did cause corruptions due to failed writes) To fix this mess, the crypto4xx driver needs to notifiy the user to slow down. This can be achieved by returning -EBUSY on requests, once the crypto hardware was falling behind. Note: -EBUSY has two different meanings. Setting the flag CRYPTO_TFM_REQ_MAY_BACKLOG implies that the request was successfully queued, by the crypto driver. To achieve this requirement, the implementation introduces a threshold check and adds logic to the completion routines in much the same way as AMD's Cryptographic Coprocessor (CCP) driver do. Note2: Tests showed that dm-crypt starved ipsec traffic. Under load, ipsec links dropped to 0 Kbits/s. This is because dm-crypt's callback would instantly queue the next request. In order to not starve ipsec, the driver reserves a small portion of the available crypto contexts for this purpose. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-10-12crypto: crypto4xx - increase context and scatter ring buffer elementsChristian Lamparter1-5/+5
If crypto4xx is used in conjunction with dm-crypt, the available ring buffer elements are not enough to handle the load properly. On an aes-cbc-essiv:sha256 encrypted swap partition the read performance is abyssal: (tested with hdparm -t) /dev/mapper/swap_crypt: Timing buffered disk reads: 14 MB in 3.68 seconds = 3.81 MB/sec The patch increases both PPC4XX_NUM_SD and PPC4XX_NUM_PD to 256. This improves the performance considerably: /dev/mapper/swap_crypt: Timing buffered disk reads: 104 MB in 3.03 seconds = 34.31 MB/sec Furthermore, PPC4XX_LAST_SD, PPC4XX_LAST_GD and PPC4XX_LAST_PD can be easily calculated from their respective PPC4XX_NUM_* constant. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-10-12crypto: crypto4xx - fix type mismatch compiler errorChristian Lamparter1-2/+2
This patch fixes a type mismatch error that I accidentally introduced when I moved and refactored the dynamic_contents helpers. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-10-12crypto: crypto4xx - fix off-by-one AES-OFBChristian Lamparter1-1/+1
I used aes-cbc as a template for ofb. But sadly I forgot to update set_key method to crypto4xx_setkey_aes_ofb(). this was caught by the testmgr: alg: skcipher: Test 1 failed (invalid result) on encr. for ofb-aes-ppc4xx 00000000: 76 49 ab ac 81 19 b2 46 ce e9 8e 9b 12 e9 19 7d 00000010: 50 86 cb 9b 50 72 19 ee 95 db 11 3a 91 76 78 b2 00000020: 73 be d6 b8 e3 c1 74 3b 71 16 e6 9e 22 22 95 16 00000030: 3f f1 ca a1 68 1f ac 09 12 0e ca 30 75 86 e1 a7 With the correct set_key method, the aes-ofb cipher passes the test. name : ofb(aes) driver : ofb-aes-ppc4xx module : crypto4xx priority : 300 refcnt : 1 selftest : passed internal : no type : ablkcipher async : yes blocksize : 16 min keysize : 16 max keysize : 32 ivsize : 16 geniv : <default> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-10-12crypto: crypto4xx - wire up hmac_mc to hmac_mutingChristian Lamparter1-0/+1
The hmac_mc parameter of set_dynamic_sa_command_1() was defined but not used. On closer inspection it turns out, it was never wired up. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-22crypto: crypto4xx - pointer arithmetic overhaulChristian Lamparter3-68/+59
This patch improves the readability of various functions, by replacing various void* pointers declarations with their respective structs *. This makes it possible to go for the eye-friendly array-indexing methods. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-22crypto: crypto4xx - fix crypto4xx_build_pdr, crypto4xx_build_sdr leakChristian Lamparter1-8/+9
If one of the later memory allocations in rypto4xx_build_pdr() fails: dev->pdr (and/or) dev->pdr_uinfo wouldn't be freed. crypto4xx_build_sdr() has the same issue with dev->sdr. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-22crypto: crypto4xx - replace crypto4xx_dev's scatter_buffer_size with constantChristian Lamparter2-5/+3
scatter_buffer_size is always set to PPC4XX_SD_BUFFER_SIZE. I don't think there's any point in keeping the variable around. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-22crypto: crypto4xx - refactor crypto4xx_copy_pkt_to_dst()Christian Lamparter1-96/+30
This patch refactors the crypto4xx_copy_pkt_to_dst() to use scatterwalk_map_and_copy() to copy the processed data between the crypto engine's scatter ring buffer and the destination specified by the ablkcipher_request. This also makes the crypto4xx_fill_one_page() function redundant. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-22crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloadsChristian Lamparter4-0/+177
The crypto engine supports more than just aes-cbc. This patch enables the remaining AES block cipher modes that pass the testmanager's test vectors. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-22crypto: crypto4xx - move and refactor dynamic_contents helpersChristian Lamparter5-99/+39
This patch refactors and moves the dynamic_contents helper functions into the crypto4xx_sa.h header file. * get_dynamic_sa_iv_size is no longer needed, as the cryptoapi provides the required IV size information as well. * refactor the function declarations to use the a pointer to the dynamic_sa_contents union, instead of the crypto4xx_ctx. * rename get_dynamic_sa_offset_key_field to get_dynamic_sa_key_field. It returns the pointer to the key directly. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-22crypto: crypto4xx - fix dynamic_sa_ctl's sa_contents declarationChristian Lamparter3-9/+9
The driver had a union dynamic_sa_contents in place that described the meaning of the bits in the sa_contents variable. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-22crypto: crypto4xx - remove double assignment of pd_uinfo->stateChristian Lamparter1-1/+0
crypto4xx_put_pd_to_pdr() already clears the flag. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-22crypto: crypto4xx - remove extern statement before function declarationChristian Lamparter1-24/+24
All function declarations are "extern" by default, there is no need to specify it explicitly. For C99 states in 6.2.2.5: "If the declaration of an identifier for a function has no storage-class specifier, its linkage is determined exactly as if it were declared with the storage-class specifier extern." Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-22crypto: crypto4xx - set CRYPTO_ALG_KERN_DRIVER_ONLY flagChristian Lamparter1-1/+3
The security offload function is performed by a cryptographic engine core attached to the 128-bit PLB (processor local bus) with builtin DMA and interrupt controllers. This, I think, satisfies the requirement for the CRYPTO_ALG_KERN_DRIVER_ONLY flag. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-22crypto: crypto4xx - remove unused definitions and write-only variablesChristian Lamparter3-23/+1
This patch removes several unused code and definitons (structs, variables, ...). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-22crypto: crypto4xx - remove bad list_delChristian Lamparter1-4/+2
alg entries are only added to the list, after the registration was successful. If the registration failed, it was never added to the list in the first place. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-20crypto: crypto4xx - fix an error codeChristophe Jaillet1-0/+1
If 'kzalloc' fails, we return 0 which means success. return -ENOMEM instead as already done a few lines above. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-24crypto: crypto4xx - rename ce_ring_contol to ce_ring_controlColin Ian King2-2/+2
trivial spelling mistake, missing r, rename to ce_ring_control Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21crypto: crypto4xx - Fix size used in dma_free_coherent()Christophe Jaillet1-2/+1
The size used in 'dma_free_coherent()' looks un-initialized here. ctx->sa_len is set a few lines below and is apparently not set by the caller. So use 'size' as in the corresponding 'dma_alloc_coherent()' a few lines above. This has been spotted with coccinelle, using the following script: //////////////////// @r@ expression x0, x1, y0, y1, z0, z1, t0, t1, ret; @@ * ret = dma_alloc_coherent(x0, y0, z0, t0); ... * dma_free_coherent(x1, y1, ret, t1); @script:python@ y0 << r.y0; y1 << r.y1; @@ if y1.find(y0) == -1: print "WARNING: sizes look different: '%s' vs '%s'" % (y0, y1) //////////////////// Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-20crypto4xx: integrate ppc4xx-rng into crypto4xxChristian Lamparter6-2/+176
This patch integrates the ppc4xx-rng driver into the existing crypto4xx. This is because the true random number generator is controlled and part of the security core. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-11-17crypto: amcc - check return value of sg_nents_for_lenLABBE Corentin1-0/+4
The sg_nents_for_len() function could fail, this patch add a check for its return value. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21crypto: amcc - replace get_sg_count by sg_nents_for_lenLABBE Corentin1-21/+1
The get_sg_count function of amcc is the same as sg_nents_for_len from lib/scatterlist.c Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21crypto: amcc - Fix module autoload for OF platform driverLuis de Bethencourt1-0/+1
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: amcc - Do a NULL check for pointerFabio Estevam1-1/+1
Compare pointer-typed values to NULL rather than 0. The semantic patch that makes this change is available in scripts/coccinelle/null/badzero.cocci Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-12crypto: amcc - remove incorrect __init/__exit markupsDmitry Torokhov1-3/+3
Even if bus is not hot-pluggable, the devices can be bound and unbound from the driver via sysfs, so we should not be using __init/__exit annotations on probe() and remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-05crypto: amcc - Remove unused functionRickard Strandqvist1-23/+0
Remove the function get_dynamic_sa_offset_iv_field() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-10-20crypto: amcc: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-20crypto: drivers - Add 2 missing __exit_pJean Delvare1-1/+1
References to __exit functions must be wrapped with __exit_p. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Marcelo Henrique Cerri <mhcerri@linux.vnet.ibm.com> Cc: Fionnuala Gunter <fin@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-12-30crypto: crypto4xx - Remove redundant dev_set_drvdataSachin Kamat1-1/+0
Driver core sets it to NULL upon probe failure or release. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-11-11powerpc: add missing explicit OF includes for ppcRob Herring1-0/+3
Commit b5b4bb3f6a11f9 (of: only include prom.h on sparc) removed implicit includes of of_*.h headers by powerpc's prom.h. Some components were missed in initial clean-up patch, so add the necessary includes to fix powerpc builds. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Tejun Heo <tj@kernel.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-ide@vger.kernel.org Cc: linux-crypto@vger.kernel.org
2013-08-14crypto: crypto4xx - Staticize local symbolsJingoo Han1-7/+8
These local symbols are used only in this file. Fix the following sparse warnings: drivers/crypto/amcc/crypto4xx_alg.c:35:6: warning: symbol 'set_dynamic_sa_command_0' was not declared. Should it be static? drivers/crypto/amcc/crypto4xx_alg.c:55:6: warning: symbol 'set_dynamic_sa_command_1' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-27crypto: crypto4xx - fix error return codePeter Senna Tschudin1-0/+1
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-04-27crypto: crypto4xx - move up err_request_irq labelJulia Lawall1-1/+1
Move the err_request_irq error label up to reflect that tasklet_init and irq_of_parse_and_map have taken place. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-30crypto: convert drivers/crypto/* to use module_platform_driver()Axel Lin1-12/+1
This patch converts the drivers in drivers/crypto/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: James Hsiao <jhsiao@amcc.com> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-30crypto: crypto4xx - Perform read/modify/write on device control registerJosh Boyer1-1/+4
The Security function on the AMCC SoCs has multiple engines within a single MMIO range. The crypto driver currently enables the 3DES functionality by doing a blind write to the device control register. This can unintentionally disable other functions like the PKA or TRNG when the driver is loaded. Perform a read/modify/write to enable the 3DES function instead. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-03-31Fix common misspellingsLucas De Marchi2-2/+2
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-02-28dt/powerpc: Eliminate users of of_platform_{,un}register_driverGrant Likely1-5/+4
Get rid of old users of of_platform_driver in arch/powerpc. Most of_platform_driver users can be converted to use the platform_bus directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: Makefile - replace the use of <module>-objs with <module>-y crypto: hifn_795x - use cancel_delayed_work_sync() crypto: talitos - sparse check endian fixes crypto: talitos - fix checkpatch warning crypto: talitos - fix warning: 'alg' may be used uninitialized in this function crypto: cryptd - Adding the AEAD interface type support to cryptd crypto: n2_crypto - Niagara2 driver needs to depend upon CRYPTO_DES crypto: Kconfig - update broken web addresses crypto: omap-sham - Adjust DMA parameters crypto: fips - FIPS requires algorithm self-tests crypto: omap-aes - OMAP2/3 AES hw accelerator driver crypto: updates to enable omap aes padata: add missing __percpu markup in include/linux/padata.h MAINTAINERS: Add maintainer entries for padata/pcrypt
2010-10-19crypto: Makefile - replace the use of <module>-objs with <module>-yTracey Dent1-1/+1
Changed <module>-objs to <module>-y in Makefile. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-08-06of/device: Replace struct of_device with struct platform_deviceGrant Likely2-3/+3
of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
2010-06-16Merge branch 'master' into for-nextJiri Kosina1-5/+8
2010-06-16fix typos concerning "initiali[zs]e"Uwe Kleine-König1-1/+1
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-02of/crypto: crypto4xx_core.c: fix build breakageAnatolij Gustschin1-3/+3
Fixes build error caused by the OF device_node pointer being moved into struct device Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22of: Remove duplicate fields from of_platform_driverGrant Likely1-2/+5
.name, .match_table and .owner are duplicated in both of_platform_driver and device_driver. This patch is a removes the extra copies from struct of_platform_driver and converts all users to the device_driver members. This patch is a pretty mechanical change. The usage model doesn't change and if any drivers have been missed, or if anything has been fixed up incorrectly, then it will fail with a compile time error, and the fixup will be trivial. This patch looks big and scary because it touches so many files, but it should be pretty safe. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sean MacLennan <smaclennan@pikatech.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-01-17crypto: Make Open Firmware device id constantMárton Németh1-1/+1
From: Márton Németh <nm127@freemail.hu> The match_table field of the struct of_device_id is constant in <linux/of_platform.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-07-15crypto: crypto4xx - Disable SHA implementationHerbert Xu1-19/+0
The crypto4xx SHA implementation keeps the hash state in the tfm data structure. This breaks a fundamental requirement of ahash implementations that they must be reentrant. This patch disables the broken implementation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-07-14crypto: crypto4xx - Switch to new style ahashHerbert Xu2-39/+71
This patch changes crypto4xx to use the new style ahash type. In particular, we now use ahash_alg to define ahash algorithms instead of crypto_alg. This is achieved by introducing a union that encapsulates the new type and the existing crypto_alg structure. They're told apart through a u32 field containing the type value. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 17:08:06 +0000