summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-12-23drm/amdgpu: add osssys v4_2 ip headers (v2)Hawking Zhang2-0/+1645
v1: add osssys v4_2 register offset and shift masks header files. vega20 and arcturus will refer to these ip headers. (Hawking) v2: clean up osssys v4_2 registers (Alex) Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
2020-12-23drm/amdgpu: switch to common decode iv helperHawking Zhang2-92/+2
The iv format is the same for all the soc15 adpater and onwards and can share a common function to decode iv. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add a helper function to decode ivHawking Zhang2-1/+46
since from soc15, all the chips share the same iv format. create a common helper to decode iv Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: use cached ih rb control reg offsets for navi10Hawking Zhang1-38/+14
all the ih rb control register offsets are cached at the beginning of navi10 ih_sw_init. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: switch to ih_enable_ring for navi10Hawking Zhang1-90/+12
use navi10_ih_enable_ring to enable all the available ring buffers for navi1x and onwards Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: switch to ih_toggle_interrupts for navi10Hawking Zhang1-133/+33
replace ih_enable_interrupts and ih_disable_interrupts with ih_toggle_interrupts Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: switch to ih_init_register_offset for navi10Hawking Zhang1-0/+3
Initialize ih control registers offset through helper function navi10_ih_init_register_offset. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add helper to toggle ih ring interrupts for navi10Hawking Zhang1-0/+45
navi10_ih_toggle_ring_interrupts will be used to enable/disable an ih ring interrupts for navi1x and onwards Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add helper to enable an ih ring for navi10Hawking Zhang1-0/+52
navi10_ih_enable_ring will be used to enable an ih ring for navi1x and onwards Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add helper to init ih ring regs for navi10Hawking Zhang1-0/+47
navi10_ih_init_register_offset will be used to init register offset for all the available ih rings Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: correct ih cg programming for vega10 ih blockHawking Zhang1-6/+2
vega10/12 and RAVEN don't support soft override ih_buffer_mem_clk. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: use cached ih rb control reg offsets for vega10Hawking Zhang1-40/+14
all the ih rb control register offsets are cached at the beginning of ih_sw_init. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: switch to ih_enable_ring for vega10Hawking Zhang1-87/+8
use vega10_ih_enable_ring to enable all the available ring buffers for vega10/12, RAVEN series and RENOIR APUs Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: switch to ih_toggle_interrupts for vega10Hawking Zhang1-134/+34
replace ih_enable_interrupts and ih_disable_interrupts with ih_toggle_interrupts Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: switch to ih_init_register_offset for vega10Hawking Zhang1-0/+3
Initialize ih control registers offset through helper function vega10_ih_init_register_offset. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add helper to toggle ih ring interrupts for vega10Hawking Zhang1-0/+45
vega10_ih_toggle_ring_interrupts will be used to enable/disable an ih ring interrupts for vega10/12, RAVEN series and RENOIR APUs Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add helper to enable an ih ring for vega10Hawking Zhang1-0/+52
vega10_ih_enable_ring will be used to enable an ih ring for vega10/12, RAVEN series and RENOIR. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add helper to init ih ring regs for vega10Hawking Zhang1-0/+47
vega10_ih_init_register_offset will be used to init register offset for all the available ih rings Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add amdgpu_ih_regs structureHawking Zhang1-0/+13
amdgpu_ih_regs holds all the registers for an ih ring Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Fix memory leaks in S3 resumeamd-drm-fixes-5.11-2020-12-23drm-next-5.11Stylon Wang1-1/+2
EDID parsing in S3 resume pushes new display modes to probed_modes list but doesn't consolidate to actual mode list. This creates a race condition when amdgpu_dm_connector_ddc_get_modes() re-initializes the list head without walking the list and results in memory leak. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=209987 Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-12-23drm/amdgpu: Fix a copy-pasta commentAlex Deucher1-2/+1
This is not a scsi driver. Reviewed-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: only set DP subconnector type on DP and eDP connectorsAlex Deucher1-4/+6
Fixes a crash in drm_object_property_set_value() because the property is not set for internal DP ports that connect to a bridge chips (e.g., DP to VGA or DP to LVDS). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210739 Fixes: 65bf2cf95d3ade ("drm/amdgpu: utilize subconnector property for DP through atombios") Tested-By: Kris Karas <bugs-a17@moonlit-rail.com> Cc: Oleg Vasilev <oleg.vasilev@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x
2020-12-23drm/amd/pm: bump Sienna Cichlid smu_driver_if version to match latest pmfwEvan Quan1-1/+1
This can suppress the annoying but unharmful prompts. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: add getter routine to retrieve mpcc muxJosip Pavic5-0/+19
[Why & How] Add function to identify which MPCC is providing input to a specified OPP Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: always program DPPDTO unless not safe to lowerJake Wang1-6/+5
[Why] We defer clock updates to after pipes have been programmed. In some instances we use DPPCLK that have been previously set to be "unused". This results in a brief window of time where underflow could occur. [How] During prepare bandwidth allow rn_update_clocks_update_dpp_dto to check each instance and compare previous clock to new clock. If new clock is higher than previous clock, program DPPDTO. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: [FW Promotion] Release 0.0.47Yongqiang Sun1-2/+2
- restore lvtma_pwrseq_delay2 from vbios integrated info table - restore MVID/NVID after power up. - Enable timer wake up mask when enable timer interrupt. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: updated wm table for RenoirJake Wang1-8/+8
[Why] For certain timings, Renoir may underflow due to sr exit latency being too slow. [How] Updated wm table for renoir. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Acquire DSC during split stream for ODM only if top_pipeSung Lee1-1/+1
[WHY] DSC should only be acquired per OPP. Therefore, DSC should only be acquired for the top_pipe when ODM is enabled. Not doing this check may lead to acquiring more DSC's than needed when doing MPO + ODM Combine. [HOW] Only acquire DSC if pipe is top_pipe. Signed-off-by: Sung Lee <sung.lee@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Multi-display underflow observedAric Cyr2-23/+9
[Why] FP2 programming not happening when topology changes occur with multiple displays. [How] Ensure FP2 is programmed whenever global sync changes occur but wait for VACTIVE first to avoid underflow. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Remove unnecessary NULL checkEryk Brol1-1/+1
[Why] new_crtc_state is already dereferenced earlier in the function [How] Remove the check Signed-off-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Update RN/VGH active display count workaroundMichael Strauss2-16/+2
[WHY] Virtual signals were previously counted as a workaround to S0i2 hang which is fixed on Renoir. This blocks S0i3 diags testing. [HOW] Stop counting virtual signals as S0i2 hang is fixed on Renoir. Signed-off-by: Michael Strauss <michael.strauss@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: change SMU repsonse timeout to 2s.Yongqiang Sun1-1/+1
[Why] there is some garbage showing up during reboot test. Reason: SMU might handle display driver msg defered and driver will send next msg to SMU after 10ms timeout, once SMU FW handle previous msg, parameters are changed to next one, which result in a wrong value be programmed. [How] Extend timeout to 2s so SMU will have enough time to handle driver msg. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: gradually ramp ABM intensityRizvi2-10/+26
[Why] Need driver to pass values of backlight ramp start and ramp reduction so that intensity can be ramped down appropriately. [How] Using abm_parameters structure to get these values from driver. Signed-off-by: Rizvi <syerizvi@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: To modify the condition in indicating branch deviceMartin Tsai1-7/+1
[why] The sink count change HPD_IRQ will be ignored if the branch device has only DP DFP. [how] To remove the port type restriction. Signed-off-by: Martin Tsai <martin.tsai@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Modify the hdcp device count check conditionMartin Tsai2-4/+11
[why] Some MST display may not report the internal panel to DEVICE_COUNT, that makes the check condition always failed. [how] To update this condition with the reported device count + 1 (because the immediate repeater's internal panel is possibly not included in DEVICE_COUNT) Signed-off-by: Martin Tsai <martin.tsai@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Interfaces for hubp blank and soft resetWesley Chalmers5-0/+28
[WHY] HUBP blanking sequence on DCN30 requires us to check if HUBP is in blank and also toggle HUBP_DISABLE, which should instead be called HUBP_SOFT_RESET for what it does in HW. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: handler not correctly checked at remove_irq_handlerQingqing Zhuo1-1/+4
[why] handler is supposedly passed in as a function pointer; however, the entire struct amdgpu_dm_irq_handler_data gets from the list is used to check match. [how] use the interrupt_handler within amdgpu_dm_irq_handler_data for checking match. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: check gfx pipe availability before toggling its interruptsHawking Zhang1-1/+8
GUI_IDLE interrupts controlled by CP_INT_CNTL_RING0 are only applicable to me0 pipe0. For ASICs that have gfx pipe removed, don't toggle those bits. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: remove unnecessary asic type checkHawking Zhang1-7/+4
The number of crtc should be 0 for ASICs that don't have display engine. Remove the unnecessary asic type check then. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: check number of gfx ring before init cp gfxHawking Zhang1-6/+6
Check number of gfx ring, rather than asic type, before cp gfx engine initialization so driver just need to make sure number of gfx ring is initialized correctly in gfx early_init phase. No need to add additional asic type check everywhere when there is new asic with gfx pipe removed. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-17drm/amdgpu: fix vbios reservation handling on SR-IOVAlex Deucher1-1/+2
There is no reserveration so set the size to 0. Fixes a regression on SR-IOV. Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-17drm/amd/pm: check pmfw version before issuing RlcPowerNotify messageXiaomeng Hou1-2/+7
Only pmfw version behind v4.63.23.00 could support this message. Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-17drm/amdkfd: PCIe atomics required for gfx10Harish Kasiviswanathan1-6/+6
GFX10 CP firmware expects PCIe atomics support. Don't enumerate GFX10 devices on platforms (PCIe v2) that don't support PCIe atomics. Currently, some of the applications like clinfo soft hangs on platforms without PCIe atomics support. Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-16drm/amdgpu/disply: fix documentation warnings in display manageramd-drm-fixes-5.11-2020-12-16Alex Deucher1-1/+20
Add documentation for crc window. Fixes: c920888c604d ("drm/amd/display: Expose new CRC window property") Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Wayne Lin <Wayne.Lin@amd.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
2020-12-16drm/amdgpu: print mmhub client name for dimgrey_cavefishTao Zhou1-0/+1
This makes it easier to debug what block is causing the fault, same as sienna_cichlid. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-16drm/amdgpu: set mode1 reset as default for dimgrey_cavefishTao Zhou1-0/+1
Use mode1 reset for dimgrey_cavefish by default. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-16drm/amd/display: Add get_dig_frontend implementation for DCExRodrigo Siqueira2-1/+43
Some old ASICs might not implement/require get_dig_frontend helper; in this scenario, we can have a NULL pointer exception when we try to call it inside vbios disable operation. For example, this situation might happen when using Polaris12 with an eDP panel. This commit avoids this situation by adding a specific get_dig_frontend implementation for DCEx. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Cc: Chiawen Huang <chiawen.huang@amd.com> Reported-and-tested-by: Borislav Petkov <bp@suse.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-12-15drm/radeon: remove h from printk format specifierTom Rix2-2/+2
See Documentation/core-api/printk-formats.rst. h should no longer be used in the format specifier for printk. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-15drm/amdgpu: remove h from printk format specifierTom Rix3-5/+5
See Documentation/core-api/printk-formats.rst. h should no longer be used in the format specifier for printk. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-15drm/amdgpu: Fix spelling mistake "Heterogenous" -> "Heterogeneous"Colin Ian King1-1/+1
There is a spelling mistake in a comment in the Kconfig. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 22:57:54 +0000