summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2006-06-23[PATCH] Remove CONFIG_PARPORT_ARC, drivers/parport/parport_arc.cDomen Puncer2-144/+0
It's wasn't referenced in Makefile since at least 2.2.8, unbuildable due to trivial typos and things like DATA_LATCH and arc_write_control() which doesn't exist. Adrian Bunk: adapted the patch to unrelated context changes Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] module.h: updated comments with a new licenseXose Vazquez Perez1-0/+2
"Dual MIT/GPL" is also accepted (kernel/module.c), so updated comments. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] fs/locks.c: make posix_locks_deadlock() staticAdrian Bunk2-4/+1
We can now make posix_locks_deadlock() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] vfs: add lock owner argument to flush operationMiklos Szeredi14-16/+16
Pass the POSIX lock owner ID to the flush operation. This is useful for filesystems which don't want to store any locking state in inode->i_flock but want to handle locking/unlocking POSIX locks internally. FUSE is one such filesystem but I think it possible that some network filesystems would need this also. Also add a flag to indicate that a POSIX locking request was generated by close(), so filesystems using the above feature won't send an extra locking request in this case. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] locks: clean up locks_remove_posix()Miklos Szeredi1-20/+5
locks_remove_posix() can use posix_lock_file() instead of doing the lock removal by hand. posix_lock_file() now does exacly the same. The comment about pids no longer applies, posix_lock_file() takes only the owner into account. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] locks: don't do unnecessary allocationsMiklos Szeredi1-3/+10
posix_lock_file() always allocates new locks in advance, even if it's easy to determine that no allocations will be needed. Optimize these cases: - FL_ACCESS flag is set - Unlocking the whole range Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] locks: don't unnecessarily fail posix lock operationsMiklos Szeredi1-7/+15
posix_lock_file() was too cautious, failing operations on OOM, even if they didn't actually require an allocation. This has the disadvantage, that a failing unlock on process exit could lead to a memory leak. There are two possibilites for this: - filesystem implements .lock() and calls back to posix_lock_file(). On cleanup of files_struct locks_remove_posix() is called which should remove all locks belonging to files_struct. However if filesystem calls posix_lock_file() which fails, then those locks will never be freed. - if a file is closed while a lock is blocked, then after acquiring fcntl_setlk() will undo the lock. But this unlock itself might fail on OOM, again possibly leaking the lock. The solution is to move the checking of the allocations until after it is sure that they will be needed. This will solve the above problem since unlock will always succeed unless it splits an existing region. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] read_mapping_page for address spacePekka Enberg22-56/+38
Add read_mapping_page() which is used for callers that pass mapping->a_ops->readpage as the filler for read_cache_page. This removes some duplication from filesystem code. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] Add a sysfs file to determine if a kexec kernel is loadedJeff Moyer3-3/+23
Create two files in /sys/kernel, kexec_loaded and kexec_crash_loaded. Each file contains a simple boolean value indicating whether the relevant kernel has been loaded into memory. The motivation for this is geared around support. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] s390_hypfs filesystemMichael Holzheu7-1/+1250
On zSeries machines there exists an interface which allows the operating system to retrieve LPAR hypervisor accounting data. For example, it is possible to get usage data for physical and virtual cpus. In order to provide this information to user space programs, I implemented a new virtual Linux file system named 's390_hypfs' using the Linux 2.6 libfs framework. The name 's390_hypfs' stands for 'S390 Hypervisor Filesystem'. All the accounting information is put into different virtual files which can be accessed from user space. All data is represented as ASCII strings. When the file system is mounted the accounting information is retrieved and a file system tree is created with the attribute files containing the cpu information. The content of the files remains unchanged until a new update is made. An update can be triggered from user space through writing 'something' into a special purpose update file. We create the following directory structure: <mount-point>/ update cpus/ <cpu-id> type mgmtime <cpu-id> ... hyp/ type systems/ <lpar-name> cpus/ <cpu-id> type mgmtime cputime onlinetime <cpu-id> ... <lpar-name> cpus/ ... - update: File to trigger update - cpus/: Directory for all physical cpus - cpus/<cpu-id>/: Directory for one physical cpu. - cpus/<cpu-id>/type: Type name of physical zSeries cpu. - cpus/<cpu-id>/mgmtime: Physical-LPAR-management time in microseconds. - hyp/: Directory for hypervisor information - hyp/type: Typ of hypervisor (currently only 'LPAR Hypervisor') - systems/: Directory for all LPARs - systems/<lpar-name>/: Directory for one LPAR. - systems/<lpar-name>/cpus/<cpu-id>/: Directory for the virtual cpus - systems/<lpar-name>/cpus/<cpu-id>/type: Typ of cpu. - systems/<lpar-name>/cpus/<cpu-id>/mgmtime: Accumulated number of microseconds during which a physical CPU was assigned to the logical cpu and the cpu time was consumed by the hypervisor and was not provided to the LPAR (LPAR overhead). - systems/<lpar-name>/cpus/<cpu-id>/cputime: Accumulated number of microseconds during which a physical CPU was assigned to the logical cpu and the cpu time was consumed by the LPAR. - systems/<lpar-name>/cpus/<cpu-id>/onlinetime: Accumulated number of microseconds during which the logical CPU has been online. As mount point for the filesystem /sys/hypervisor/s390 is created. The update process is triggered when writing 'something' into the 'update' file at the top level hypfs directory. You can do this e.g. with 'echo 1 > update'. During the update the whole directory structure is deleted and built up again. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Ingo Oeser <ioe-lkml@rameria.de> Cc: Joern Engel <joern@wohnheim.fh-wedel.de> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] xtensa: remove verify_area macrosJesper Juhl6-47/+13
verify_area() is still alive on xtensa in 2.6.17-rc3-git13 It would be nice to finally be rid of that function across the board. Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: windfarm is powerpc-only, don't do it on m68k macsAl Viro1-0/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k traps.c constraintsAl Viro1-1/+1
Cast is not an lvalue; =r constraint wants an lvalue and really couldn't care whether it's void * or other pointer type. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: ptrace.h typo fixJan Altenberg1-1/+1
Signed-off-by: Jan Altenberg <tb10alj@tglx.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: clean up uaccess.hRoman Zippel3-815/+495
This uninlines a few large functions in uaccess.h and cleans up the rest. It includes a (hopefully temporary) workaround for the broken typeof of gcc-4.1. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: m68k mac VIA2 fixes and cleanupsFinn Thain3-29/+2
Some fixes and cleanups from the linux-mac68k repo. Fix mac_esp by clearing the VIA2 SCSI IRQ flag before the SCSI IRQ handler is invoked. Also fix a race condition caused by unmasking a nubus slot IRQ then setting the relevant nubus_active bit. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: adjust to changed HARDIRQ_MASKRoman Zippel2-2/+8
Adjust entry.S to the changed HARDIRQ_MASK, add a check to prevent it from silently breaking again. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: use proper defines for zone initializationRoman Zippel2-9/+8
MAX_NR_ZONES changed, so use correct defines now. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: wd33c93: extra delayRoman Zippel1-0/+4
The wd33c93 needs a small delay before a new command can be started. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: restore amikbd compatibility with 2.4Roman Zippel1-12/+22
Dump the extra mapping in the amikbd interrupt handler, so old Amiga keymaps work again. Amigas need a special keymap anyway, standard keymaps are not usable and recreating all keymaps is simply not worth the trouble. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: print correct stack traceRoman Zippel1-2/+4
Pass unmodified stack argument to show_trace(). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: use c99 initializerRoman Zippel1-4/+4
Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: Remove some unused definitions in zorro.hRoman Zippel1-42/+0
These definitions have long been superseded by asm-offsets.h Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: cleanup unistd.hRoman Zippel1-39/+0
Remove long obsolete kernel syscalls, only execve is still used. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: atyfb_base compile fix for CONFIG_PCI=nRoman Zippel1-0/+4
The atyfb_driver structure is only available if CONFIG_PCI is set. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: completely initialize hw_regs_t in ide_setup_portsRoman Zippel2-0/+2
ide_setup_ports does not completely initialize the hw_regs_t structure which can cause random failures, as the structure is often on the stack. None of the callers expect a partially initialized structure, i.e. none of them do any setup of their own before calling ide_setup_ports(). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] move do_suspend_lowlevel to correct segmentShaohua Li1-5/+4
Move do_suspend_lowlevel to correct segment. If it is in the same hugepage with ro data, mark_rodata_ro will make it unexecutable. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] swsusp: documentation updatesPavel Machek2-3/+46
Update documentation a bit, add more machines to video.txt list. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] don't use flush_tlb_all in suspend timeShaohua Li4-21/+10
flush_tlb_all uses on_each_cpu, which will disable/enable interrupt. In suspend/resume time, this will make interrupt wrongly enabled. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] swsusp: use less memory during resumeRafael J. Wysocki2-58/+85
Make swsusp allocate only as much memory as needed to store the image data and metadata during resume. Without this patch swsusp additionally allocates many page frames that will conflict with the "original" locations of the image data and are considered as "unsafe", treating them as "eaten" pages (ie. allocated but unusable). The patch makes swsusp allocate as many pages as it'll need to store the data read from the image in one shot, creating a list of allocated "safe" pages, and use the observation that all pages allocated by it are marked with the PG_nosave and PG_nosave_free flags set.  Namely, when it's about to load an image page, swsusp can check whether the page frame corresponding to the "original" location of this page has been allocated (ie. if the page frame has the PG_nosave and PG_nosave_free flags set) and if so, it can load the page directly into this page frame.  Otherwise it uses an allocated "safe" page from the list to store the data that will be copied to their "original" location later on. This allows us to save many page copyings and page allocations during resume and in the future it may allow us to load images greater than 50% of the normal zone. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: "Pavel Machek" <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] kernel/power/snapshot.c: cleanupsAdrian Bunk1-7/+8
- make needlessly global functions static - make dummy functions static inline Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] swsusp: take lowmem reserves into accountRafael J. Wysocki1-1/+3
swsusp allocates memory from the normal zone, so it cannot use lowmem reserve pages from the lower zones. Therefore it should not count these pages as available to it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] swsusp: x86_64 mark special saveable/unsaveable pagesShaohua Li1-0/+95
Pages (Reserved/ACPI NVS/ACPI Data) below end_pfn will be saved/restored by S4 currently. We should mark 'Reserved' pages not saveable. Pages (Reserved/ACPI NVS/ACPI Data) above end_pfn will not be saved/restored by S4 currently. We should save the 'ACPI NVS/ACPI Data' pages. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Nigel Cunningham <nigel@suspend2.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] swsusp: i386 mark special saveable/unsaveable pagesShaohua Li1-0/+106
Pages (Reserved/ACPI NVS/ACPI Data) below max_low_pfn will be saved/restored by S4 currently. We should mark 'Reserved' pages not saveable. Pages (Reserved/ACPI NVS/ACPI Data) above max_low_pfn will not be saved/restored by S4 currently. We should save the 'ACPI NVS/ACPI Data' pages. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Nigel Cunningham <nigel@suspend2.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] swsusp: add architecture special saveable pages supportShaohua Li4-15/+118
1. Add architecture specific pages save/restore support. Next two patches will use this to save/restore 'ACPI NVS' pages. 2. Allow reserved pages 'nosave'. This could avoid save/restore BIOS reserved pages. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Nigel Cunningham <nigel@suspend2.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] Remove duplicate symbol exports on AlphaMathieu Chouquet-Stringer1-12/+0
WARNING: vmlinux: 'enable_irq' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'disable_irq' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'disable_irq_nosync' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'probe_irq_mask' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'sys_open' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'sys_read' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'strstr' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'memscan' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'memcmp' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'strnlen' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'strncmp' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'strcmp' exported twice. Previous export was in vmlinux Signed-off-by: Mathieu Chouquet-Stringer <mchouque@free.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] x86: compile fix for asm-i386/alternatives.hKirill Smelkov1-0/+2
compile fix: <asm-i386/alternative.h> needs <asm/types.h> for 'u8' -- just look at struct alt_instr. My module includes <asm/bitops.h> as the first header, and as of 2.6.17 this leads to compilation errors. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] x86: VIA C7 CPU flagsMichal Ludvig2-1/+13
New CPU flags for next generation of crypto engine as found in VIA C7 processors. Signed-off-by: Michal Ludvig <michal@logix.cz> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] i386: extra checks in show_registers()Chuck Ebbert1-2/+3
Sometimes thread_info and task_struct get out-of-sync with each other. Printing task.thread_info in show_registers() can help spot this. And when task_struct is corrupt then task.comm can contain garbage, so only print as many characters as it can hold. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] x86: fix __range_ok constraintRoman Zippel1-1/+1
An immediate operand can't be the destination of the cmpl instruction, so exclude it. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Mattia Dongili <malattia@linux.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] i386: don't try kprobes for v8086 modeZachary Amsden1-1/+1
Never allow int3 traps from V8086 mode to enter the kprobes handler. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] i386: fix get_segment_eip() with vm86 segmentsChuck Ebbert1-4/+7
We need to check for vm86 mode first before looking at selector privilege bits. Segment limit is always base + 64k and only the low 16 bits of EIP are significant in vm86 mode. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Cc: Andi Kleen <ak@muc.de> Cc: Zachary Amsden <zach@vmware.com> Cc: Rohit Seth <rohitseth@google.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] x86: use proper defines for i8259A I/OAndreas Mohr1-2/+2
Use proper defines instead of open-coded values. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] x86: constify arch/i386/pci/irq.cAndreas Mohr1-7/+7
constify structs and add one __initdata. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] make ACPI errata __read_mostlyAndreas Mohr1-1/+1
Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] x86: make i387 mxcsr_feature_mask __read_mostlyAndreas Mohr2-2/+2
Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] x86: cyrix code CONFIG_PCI fix / add __initdataAndreas Mohr1-4/+5
PCI code was outside of CONFIG_PCI, add __initdata at cyrix_55x0 (since accessed within __init function only). Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] x86: make using_apic_timer __read_mostlyAndreas Mohr2-2/+2
Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] i386: let usermode execute the "enter" instructionChuck Ebbert1-5/+5
The i386 page fault handler does not allow enough slack when checking for userspace access below the current stack pointer. This prevents use of the enter instruction by user code. Fix this by allowing enough slack for "enter $65535,$31" to execute. Problem reported by Tomasz Malesinski <tmal@mimuw.edu.pl> Tested using this program, based on the original from Tomasz: .file "ovflow.S" .version "01.01" gcc2_compiled.: .section .rodata .LC0: .string "asdf\n" .text .align 4 .globl main .type main,@function main: nest_level=0 .rept 30 enter $0,$nest_level nest_level=nest_level+1 .endr enter $65535,$30 enter $65535,$31 addl $-12,%esp pushl $.LC0 call printf addl $16,%esp .L2: .rept 32 leave .endr ret .Lfe1: .size main,.Lfe1-main .ident "GCC: (GNU) 2.95.4 20011002 (Debian prerelease)" Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] x86: kernel irq balance doesn't workZhang Yanmin3-11/+31
On i386, kernel irq balance doesn't work. 1) In function do_irq_balance, after kernel finds the min_loaded cpu but before calling set_pending_irq to really pin the selected_irq to the target cpu, kernel does a cpus_and with irq_affinity[selected_irq]. Later on, when the irq is acked, kernel would calls move_native_irq=>desc->handler->set_affinity to change the irq affinity. However, every function pointed by hw_interrupt_type->set_affinity(unsigned int irq, cpumask_t cpumask) always changes irq_affinity[irq] to cpumask. Next time when recalling do_irq_balance, it has to do cpu_ands again with irq_affinity[selected_irq], but irq_affinity[selected_irq] already becomes one cpu selected by the first irq balance. 2) Function balance_irq in file arch/i386/kernel/io_apic.c has the same issue. [akpm@osdl.org: cleanups] Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 10:39:04 +0000